Initial import of template_index

15 files changed, 1625 insertions, 0 deletions

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 00000000..3c13d553
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,12 @@
+Makefile
+Makefile.in
+aclocal.m4
+autom4te.cache
+config.h
+config.log
+config.status
+configure
+stamp-h1
+src/*.o
+src/.deps
+src/template_index
diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 00000000..e69de29b
--- /dev/null
+++ b/AUTHORS
diff --git a/COPYING b/COPYING
new file mode 100644
index 00000000..a459ee65
--- /dev/null
+++ b/COPYING
@@ -0,0 +1 @@
+(c) 2006 Thomas White <taw27@cam.ac.uk>
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 00000000..e69de29b
--- /dev/null
+++ b/ChangeLog
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 00000000..56b077d6
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,236 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 00000000..c4402796
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,2 @@
+EXTRA_DIST = configure src/reflist.h src/statistics.h
+SUBDIRS = src
diff --git a/NEWS b/NEWS
new file mode 100644
index 00000000..e69de29b
--- /dev/null
+++ b/NEWS
diff --git a/README b/README
new file mode 100644
index 00000000..e69de29b
--- /dev/null
+++ b/README
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 00000000..897d5554
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,71 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+   to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#undef RETSIGTYPE
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 00000000..9a495108
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,21 @@
+dnl Process this file with autoconf to produce a configure script.
+
+AC_INIT(template_index, 0.1.0, thomas.white@desy.de)
+VERSION=AC_PACKAGE_VERSION
+
+AM_CONFIG_HEADER(config.h)
+AM_INIT_AUTOMAKE(template_index, "$VERSION")
+
+AC_PROG_CC
+AC_PROG_AWK
+AC_PROG_INSTALL
+AC_PROG_LN_S
+
+AC_HEADER_STDC
+AC_CHECK_HEADERS([fcntl.h stdlib.h string.h unistd.h])
+AC_C_CONST
+AC_FUNC_MALLOC
+AC_TYPE_SIGNAL
+AC_CHECK_FUNCS([strdup])
+
+AC_OUTPUT(Makefile src/Makefile)
diff --git a/depcomp b/depcomp
new file mode 100755
index 00000000..ffcd540c
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,529 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-02-09.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+  stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mecanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/install-sh b/install-sh
new file mode 100755
index 00000000..1a835340
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,323 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-02-02.21
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/missing b/missing
new file mode 100755
index 00000000..09edd884
--- /dev/null
+++ b/missing
@@ -0,0 +1,357 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-02-08.22
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/src/Makefile.am b/src/Makefile.am
new file mode 100644
index 00000000..ac173bb1
--- /dev/null
+++ b/src/Makefile.am
@@ -0,0 +1,4 @@
+bin_PROGRAMS = template_index
+template_index_SOURCES = main.c
+template_index_LDADD = @LIBS@ -lm
+AM_CFLAGS = -Wall -g
diff --git a/src/main.c b/src/main.c
new file mode 100644
index 00000000..ffb269e4
--- /dev/null
+++ b/src/main.c
@@ -0,0 +1,69 @@
+/*
+ * main.c
+ *
+ * "Main"
+ *
+ * (c) 2006-2009 Thomas White <thomas.white@desy.de>
+ *
+ * template_index - Indexing diffraction patterns by template matching
+ *
+ */
+
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdarg.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+
+static void main_show_help(const char *s)
+{
+	printf("Syntax: %s <file1.h5> <file2.h5> [...]\n\n", s);
+	printf("Index diffraction patterns\n\n");
+	printf("  -h              Display this help message\n");
+}
+
+
+int main(int argc, char *argv[])
+{
+	int c;
+	char **in_files;
+	size_t nin;
+	size_t i;
+
+	while ((c = getopt(argc, argv, "h")) != -1) {
+
+		switch ( c ) {
+
+			case 'h' : {
+				main_show_help(argv[0]);
+				return 0;
+			}
+
+		}
+
+	}
+
+	if ( optind < argc ) {
+		nin = argc-optind;
+		in_files = malloc(nin*sizeof(char *));
+		for ( i=0; i<nin; i++ ) {
+			in_files[i] = strdup(argv[optind+i]);
+		}
+	} else {
+		fprintf(stderr, "No input files!\n");
+		return 1;
+	}
+
+	printf("Input files (%i):\n", nin);
+	for ( i=0; i<nin; i++ ) {
+		printf("%6i: %s\n", i+1, in_files[i]);
+	}
+
+	return 0;
+}