Remove more derived files

5 files changed, 3 insertions, 1972 deletions

diff --git a/.gitignore b/.gitignore
index c79357fe..d4735dc3 100644
--- a/.gitignore
+++ b/.gitignore
@@ -6,6 +6,7 @@ libtool
 INSTALL
 doc/reference/Makefile.in
 aclocal.m4
+m4/gtk-doc.m4
 Makefile
 autom4te.cache
 config.h
@@ -38,3 +39,5 @@ src/partial_sim
 src/.dirstamp
 *~
 doc/reference/*
+gtk-doc.make
+
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index d4a2d7c6..00000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,1401 +0,0 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.66],,
-[m4_warning([this file was generated for autoconf 2.66.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# Configure paths for GTK+
-# Owen Taylor     1997-2001
-
-dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, 
-dnl pass to pkg-config
-dnl
-AC_DEFUN([AM_PATH_GTK_2_0],
-[dnl 
-dnl Get the cflags and libraries from pkg-config
-dnl
-AC_ARG_ENABLE(gtktest, [  --disable-gtktest       do not try to compile and run a test GTK+ program],
-		    , enable_gtktest=yes)
-
-  pkg_config_args=gtk+-2.0
-  for module in . $4
-  do
-      case "$module" in
-         gthread) 
-             pkg_config_args="$pkg_config_args gthread-2.0"
-         ;;
-      esac
-  done
-
-  no_gtk=""
-
-  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
-
-  if test x$PKG_CONFIG != xno ; then
-    if pkg-config --atleast-pkgconfig-version 0.7 ; then
-      :
-    else
-      echo "*** pkg-config too old; version 0.7 or better required."
-      no_gtk=yes
-      PKG_CONFIG=no
-    fi
-  else
-    no_gtk=yes
-  fi
-
-  min_gtk_version=ifelse([$1], ,2.0.0,$1)
-  AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)
-
-  if test x$PKG_CONFIG != xno ; then
-    ## don't try to run the test against uninstalled libtool libs
-    if $PKG_CONFIG --uninstalled $pkg_config_args; then
-	  echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
-	  enable_gtktest=no
-    fi
-
-    if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
-	  :
-    else
-	  no_gtk=yes
-    fi
-  fi
-
-  if test x"$no_gtk" = x ; then
-    GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
-    GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
-    gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_gtktest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GTK_CFLAGS"
-      LIBS="$GTK_LIBS $LIBS"
-dnl
-dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
-dnl checks the results of pkg-config to some extent)
-dnl
-      rm -f conf.gtktest
-      AC_TRY_RUN([
-#include <gtk/gtk.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int 
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  fclose (fopen ("conf.gtktest", "w"));
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_gtk_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_gtk_version");
-     exit(1);
-   }
-
-  if ((gtk_major_version != $gtk_config_major_version) ||
-      (gtk_minor_version != $gtk_config_minor_version) ||
-      (gtk_micro_version != $gtk_config_micro_version))
-    {
-      printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
-             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
-             gtk_major_version, gtk_minor_version, gtk_micro_version);
-      printf ("*** was found! If pkg-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
-      printf("*** to point to the correct configuration files\n");
-    } 
-  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
-	   (gtk_minor_version != GTK_MINOR_VERSION) ||
-           (gtk_micro_version != GTK_MICRO_VERSION))
-    {
-      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
-	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     gtk_major_version, gtk_minor_version, gtk_micro_version);
-    }
-  else
-    {
-      if ((gtk_major_version > major) ||
-        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
-        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
-               gtk_major_version, gtk_minor_version, gtk_micro_version);
-        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
-        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_gtk" = x ; then
-     AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$PKG_CONFIG" = "no" ; then
-       echo "*** A new enough version of pkg-config was not found."
-       echo "*** See http://pkgconfig.sourceforge.net"
-     else
-       if test -f conf.gtktest ; then
-        :
-       else
-          echo "*** Could not run GTK+ test program, checking why..."
-	  ac_save_CFLAGS="$CFLAGS"
-	  ac_save_LIBS="$LIBS"
-          CFLAGS="$CFLAGS $GTK_CFLAGS"
-          LIBS="$LIBS $GTK_LIBS"
-          AC_TRY_LINK([
-#include <gtk/gtk.h>
-#include <stdio.h>
-],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
-          echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GTK_CFLAGS=""
-     GTK_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(GTK_CFLAGS)
-  AC_SUBST(GTK_LIBS)
-  rm -f conf.gtktest
-])
-
-# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-# 
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-AC_DEFUN([PKG_PROG_PKG_CONFIG],
-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-fi
-if test -n "$PKG_CONFIG"; then
-	_pkg_min_version=m4_default([$1], [0.9.0])
-	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
-	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_RESULT([no])
-		PKG_CONFIG=""
-	fi
-fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists.  Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_EXISTS],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-if test -n "$PKG_CONFIG" && \
-    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
-  m4_default([$2], [:])
-m4_ifvaln([$3], [else
-  $3])dnl
-fi])
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-m4_define([_PKG_CONFIG],
-[if test -n "$$1"; then
-    pkg_cv_[]$1="$$1"
- elif test -n "$PKG_CONFIG"; then
-    PKG_CHECK_EXISTS([$3],
-                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
-		     [pkg_failed=yes])
- else
-    pkg_failed=untried
-fi[]dnl
-])# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_MODULES],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-
-pkg_failed=no
-AC_MSG_CHECKING([for $1])
-
-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-
-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-and $1[]_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.])
-
-if test $pkg_failed = yes; then
-   	AC_MSG_RESULT([no])
-        _PKG_SHORT_ERRORS_SUPPORTED
-        if test $_pkg_short_errors_supported = yes; then
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
-        else 
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
-        fi
-	# Put the nasty error message in config.log where it belongs
-	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-
-	m4_default([$4], [AC_MSG_ERROR(
-[Package requirements ($2) were not met:
-
-$$1_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-_PKG_TEXT])
-        ])
-elif test $pkg_failed = untried; then
-     	AC_MSG_RESULT([no])
-	m4_default([$4], [AC_MSG_FAILURE(
-[The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-_PKG_TEXT
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])
-        ])
-else
-	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
-        AC_MSG_RESULT([yes])
-	$3
-fi[]dnl
-])# PKG_CHECK_MODULES
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.1], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 16
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES(CC)],
-		  [define([AC_PROG_CC],
-			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES(CXX)],
-		  [define([AC_PROG_CXX],
-			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES(OBJC)],
-		  [define([AC_PROG_OBJC],
-			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_PROG_CC_C_O
-# --------------
-# Like AC_PROG_CC_C_O, but changed for automake.
-AC_DEFUN([AM_PROG_CC_C_O],
-[AC_REQUIRE([AC_PROG_CC_C_O])dnl
-AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
-   # Losing compiler, so override with the script.
-   # FIXME: It is wrong to rewrite CC.
-   # But if we don't then we get into trouble of one sort or another.
-   # A longer-term fix would be to have automake use am__CC in this case,
-   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
-   CC="$am_aux_dir/compile $CC"
-fi
-dnl Make sure AC_PROG_CC is never called again, or it will override our
-dnl setting of CC.
-m4_define([AC_PROG_CC],
-          [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2009  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# (`yes' being less verbose, `no' or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules],
-[  --enable-silent-rules          less verbose build output (undo: `make V=1')
-  --disable-silent-rules         verbose build output (undo: `make V=0')])
-case $enable_silent_rules in
-yes) AM_DEFAULT_VERBOSITY=0;;
-no)  AM_DEFAULT_VERBOSITY=1;;
-*)   AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/00gnulib.m4])
-m4_include([m4/extensions.m4])
-m4_include([m4/gnulib-common.m4])
-m4_include([m4/gnulib-comp.m4])
-m4_include([m4/gtk-doc.m4])
-m4_include([m4/include_next.m4])
-m4_include([m4/lib-ignore.m4])
-m4_include([m4/libtool.m4])
-m4_include([m4/ltoptions.m4])
-m4_include([m4/ltsugar.m4])
-m4_include([m4/ltversion.m4])
-m4_include([m4/lt~obsolete.m4])
-m4_include([m4/memchr.m4])
-m4_include([m4/mmap-anon.m4])
-m4_include([m4/onceonly.m4])
-m4_include([m4/stddef_h.m4])
-m4_include([m4/string_h.m4])
-m4_include([m4/strndup.m4])
-m4_include([m4/strnlen.m4])
-m4_include([m4/warn-on-use.m4])
-m4_include([m4/wchar_t.m4])
diff --git a/config.h.in b/config.h.in
deleted file mode 100644
index 34cedce2..00000000
--- a/config.h.in
+++ /dev/null
@@ -1,297 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define to 1 when the gnulib module memchr should be tested. */
-#undef GNULIB_TEST_MEMCHR
-
-/* Define to 1 when the gnulib module strndup should be tested. */
-#undef GNULIB_TEST_STRNDUP
-
-/* Define to 1 when the gnulib module strnlen should be tested. */
-#undef GNULIB_TEST_STRNLEN
-
-/* Define to 1 if you have the <bp-sym.h> header file. */
-#undef HAVE_BP_SYM_H
-
-/* Define to 1 if Cairo is available */
-#undef HAVE_CAIRO
-
-/* Define to 1 if clock_gettime is available. */
-#undef HAVE_CLOCK_GETTIME
-
-/* Define to 1 if CL/cl.h should be used */
-#undef HAVE_CL_CL_H
-
-/* Define to 1 if sched_setaffinity is available. */
-#undef HAVE_CPU_AFFINITY
-
-/* Define to 1 if you have the declaration of `strndup', and to 0 if you
-   don't. */
-#undef HAVE_DECL_STRNDUP
-
-/* Define to 1 if you have the declaration of `strnlen', and to 0 if you
-   don't. */
-#undef HAVE_DECL_STRNLEN
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define to 1 if FFTW is available */
-#undef HAVE_FFTW
-
-/* Define to 1 if you have the `forkpty' function. */
-#undef HAVE_FORKPTY
-
-/* Define to 1 if a BSD-style forkpty is available */
-#undef HAVE_FORKPTY_BSD
-
-/* Define to 1 if a Linux-style forkpty is available */
-#undef HAVE_FORKPTY_LINUX
-
-/* Define to 1 if gdk-pixbuf is available */
-#undef HAVE_GDK_PIXBUF
-
-/* Define to 1 if GTK and GDK are available */
-#undef HAVE_GTK
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if libPNG is available */
-#undef HAVE_LIBPNG
-
-/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
-   to 0 otherwise. */
-#undef HAVE_MALLOC
-
-/* Define to 1 if mmap()'s MAP_ANONYMOUS flag is available after including
-   config.h and <sys/mman.h>. */
-#undef HAVE_MAP_ANONYMOUS
-
-/* Define to 1 if you have the `memchr' function. */
-#undef HAVE_MEMCHR
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `mprotect' function. */
-#undef HAVE_MPROTECT
-
-/* Define to 1 if OpenCL is available */
-#undef HAVE_OPENCL
-
-/* Define to 1 if Pango is available */
-#undef HAVE_PANGO
-
-/* Define to 1 if PangoCairo is available */
-#undef HAVE_PANGOCAIRO
-
-/* Define to 1 if memmem is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MEMMEM
-
-/* Define to 1 if mempcpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MEMPCPY
-
-/* Define to 1 if memrchr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MEMRCHR
-
-/* Define to 1 if rawmemchr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_RAWMEMCHR
-
-/* Define to 1 if stpcpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STPCPY
-
-/* Define to 1 if stpncpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STPNCPY
-
-/* Define to 1 if strcasestr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRCASESTR
-
-/* Define to 1 if strchrnul is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRCHRNUL
-
-/* Define to 1 if strdup is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRDUP
-
-/* Define to 1 if strerror_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRERROR_R
-
-/* Define to 1 if strncat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRNCAT
-
-/* Define to 1 if strndup is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRNDUP
-
-/* Define to 1 if strnlen is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRNLEN
-
-/* Define to 1 if strpbrk is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRPBRK
-
-/* Define to 1 if strsep is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRSEP
-
-/* Define to 1 if strsignal is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRSIGNAL
-
-/* Define to 1 if strtok_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRTOK_R
-
-/* Define to 1 if strverscmp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRVERSCMP
-
-/* Define to 1 if you have the <stddef.h> header file. */
-#undef HAVE_STDDEF_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `strndup' function. */
-#undef HAVE_STRNDUP
-
-/* Define to 1 if you have the <sys/mman.h> header file. */
-#undef HAVE_SYS_MMAN_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if libTIFF is available */
-#undef HAVE_TIFF
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the 'wchar_t' type. */
-#undef HAVE_WCHAR_T
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
-#undef LT_OBJDIR
-
-/* Define to a substitute value for mmap()'s MAP_ANONYMOUS flag. */
-#undef MAP_ANONYMOUS
-
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-#undef NO_MINUS_C_MINUS_O
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define as the return type of signal handlers (`int' or `void'). */
-#undef RETSIGTYPE
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to 1 if on MINIX. */
-#undef _MINIX
-
-/* Define to 2 if the system does not provide POSIX.1 features except with
-   this defined. */
-#undef _POSIX_1_SOURCE
-
-/* Define to 1 if you need to in order for `stat' and other things to work. */
-#undef _POSIX_SOURCE
-
-/* Define to 500 only on HP-UX. */
-#undef _XOPEN_SOURCE
-
-/* Enable extensions on AIX 3, Interix.  */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-/* Enable GNU extensions on systems that have them.  */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-/* Enable threading extensions on Solaris.  */
-#ifndef _POSIX_PTHREAD_SEMANTICS
-# undef _POSIX_PTHREAD_SEMANTICS
-#endif
-/* Enable extensions on HP NonStop.  */
-#ifndef _TANDEM_SOURCE
-# undef _TANDEM_SOURCE
-#endif
-/* Enable general extensions on Solaris.  */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
-#endif
-
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Work around a bug in Apple GCC 4.0.1 build 5465: In C99 mode, it supports
-   the ISO C 99 semantics of 'extern inline' (unlike the GNU C semantics of
-   earlier versions), but does not display it by setting __GNUC_STDC_INLINE__.
-   __APPLE__ && __MACH__ test for MacOS X.
-   __APPLE_CC__ tests for the Apple compiler and its version.
-   __STDC_VERSION__ tests for the C99 mode.  */
-#if defined __APPLE__ && defined __MACH__ && __APPLE_CC__ >= 5465 && !defined __cplusplus && __STDC_VERSION__ >= 199901L && !defined __GNUC_STDC_INLINE__
-# define __GNUC_STDC_INLINE__ 1
-#endif
-
-/* Define to rpl_malloc if the replacement function should be used. */
-#undef malloc
-
-/* Define to the equivalent of the C99 'restrict' keyword, or to
-   nothing if this is not supported.  Do not define if restrict is
-   supported directly.  */
-#undef restrict
-/* Work around a bug in Sun C++: it does not support _Restrict or
-   __restrict__, even though the corresponding Sun C compiler ends up with
-   "#define restrict _Restrict" or "#define restrict __restrict__" in the
-   previous line.  Perhaps some future version of Sun C++ will work with
-   restrict; if so, hopefully it defines __RESTRICT like Sun C does.  */
-#if defined __SUNPRO_CC && !defined __RESTRICT
-# define _Restrict
-# define __restrict__
-#endif
-
-/* Define as a marker that can be attached to declarations that might not
-    be used.  This helps to reduce warnings, such as from
-    GCC -Wunused-parameter.  */
-#if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7)
-# define _GL_UNUSED __attribute__ ((__unused__))
-#else
-# define _GL_UNUSED
-#endif
-/* The name _UNUSED_PARAMETER_ is an earlier spelling, although the name
-   is a misnomer outside of parameter lists.  */
-#define _UNUSED_PARAMETER_ _GL_UNUSED
-
diff --git a/gtk-doc.make b/gtk-doc.make
deleted file mode 100644
index 55746451..00000000
--- a/gtk-doc.make
+++ /dev/null
@@ -1,213 +0,0 @@
-# -*- mode: makefile -*-
-
-####################################
-# Everything below here is generic #
-####################################
-
-if GTK_DOC_USE_LIBTOOL
-GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
-GTKDOC_RUN = $(LIBTOOL) --mode=execute
-else
-GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
-GTKDOC_RUN =
-endif
-
-# We set GPATH here; this gives us semantics for GNU make
-# which are more like other make's VPATH, when it comes to
-# whether a source that is a target of one rule is then
-# searched for in VPATH/GPATH.
-#
-GPATH = $(srcdir)
-
-TARGET_DIR=$(HTML_DIR)/$(DOC_MODULE)
-
-EXTRA_DIST = 				\
-	$(content_files)		\
-	$(HTML_IMAGES)			\
-	$(DOC_MAIN_SGML_FILE)		\
-	$(DOC_MODULE)-sections.txt	\
-	$(DOC_MODULE)-overrides.txt
-
-DOC_STAMPS=scan-build.stamp sgml-build.stamp html-build.stamp pdf-build.stamp \
-	$(srcdir)/sgml.stamp $(srcdir)/html.stamp  \
-	$(srcdir)/pdf.stamp
-
-SCANOBJ_FILES = 		 \
-	$(DOC_MODULE).args 	 \
-	$(DOC_MODULE).hierarchy  \
-	$(DOC_MODULE).interfaces \
-	$(DOC_MODULE).prerequisites \
-	$(DOC_MODULE).signals
-
-REPORT_FILES = \
-	$(DOC_MODULE)-undocumented.txt \
-	$(DOC_MODULE)-undeclared.txt \
-	$(DOC_MODULE)-unused.txt
-
-CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS)
-
-if ENABLE_GTK_DOC
-if GTK_DOC_BUILD_HTML
-HTML_BUILD_STAMP=html-build.stamp
-else
-HTML_BUILD_STAMP=
-endif
-if GTK_DOC_BUILD_PDF
-PDF_BUILD_STAMP=pdf-build.stamp
-else
-PDF_BUILD_STAMP=
-endif
-
-all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
-else
-all-local:
-endif
-
-docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
-
-$(REPORT_FILES): sgml-build.stamp
-
-#### scan ####
-
-scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
-	@echo 'gtk-doc: Scanning header files'
-	@-chmod -R u+w $(srcdir)
-	@_source_dir='' ; for i in $(DOC_SOURCE_DIR) ; do \
-	    _source_dir="$${_source_dir} --source-dir=$$i" ; \
-	  done ; \
-	  cd $(srcdir) && \
-	  gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
-	@if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \
-	    CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \
-	else \
-	    cd $(srcdir) ; \
-	    for i in $(SCANOBJ_FILES) ; do \
-               test -f $$i || touch $$i ; \
-	    done \
-	fi
-	@touch scan-build.stamp
-
-$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
-	@true
-
-#### xml ####
-
-sgml-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files)
-	@echo 'gtk-doc: Building XML'
-	@-chmod -R u+w $(srcdir)
-	@_source_dir='' ; for i in $(DOC_SOURCE_DIR) ; do \
-	    _source_dir="$${_source_dir} --source-dir=$$i" ; \
-	  done ; \
-	  cd $(srcdir) && \
-	  gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
-	@touch sgml-build.stamp
-
-sgml.stamp: sgml-build.stamp
-	@true
-
-#### html ####
-
-html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
-	@echo 'gtk-doc: Building HTML'
-	@-chmod -R u+w $(srcdir)
-	@rm -rf $(srcdir)/html
-	@mkdir $(srcdir)/html
-	@mkhtml_options=""; \
-	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-path"; \
-	if test "$(?)" = "0"; then \
-	  mkhtml_options=--path="$(srcdir)"; \
-	fi; \
-	cd $(srcdir)/html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
-	@test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html )
-	@echo 'gtk-doc: Fixing cross-references'
-	@cd $(srcdir) && gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
-	@touch html-build.stamp
-
-#### pdf ####
-
-pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
-	@echo 'gtk-doc: Building PDF'
-	@-chmod -R u+w $(srcdir)
-	@rm -rf $(srcdir)/$(DOC_MODULE).pdf
-	@mkpdf_imgdirs=""; \
-	if test "x$(HTML_IMAGES)" != "x"; then \
-	  for img in $(HTML_IMAGES); do \
-	    part=`dirname $$img`; \
-	    echo $$mkpdf_imgdirs | grep >/dev/null "\-\-imgdir=$$part "; \
-	    if test $$? != 0; then \
-	      mkpdf_imgdirs="$$mkpdf_imgdirs --imgdir=$$part"; \
-	    fi; \
-	  done; \
-	fi; \
-	cd $(srcdir) && gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_imgdirs $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
-	@touch pdf-build.stamp
-
-##############
-
-clean-local:
-	rm -f *~ *.bak
-	rm -rf .libs
-
-distclean-local:
-	cd $(srcdir) && \
-	  rm -rf xml $(REPORT_FILES) $(DOC_MODULE).pdf \
-	         $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
-
-maintainer-clean-local: clean
-	cd $(srcdir) && rm -rf html
-
-install-data-local:
-	@installfiles=`echo $(srcdir)/html/*`; \
-	if test "$$installfiles" = '$(srcdir)/html/*'; \
-	then echo '-- Nothing to install' ; \
-	else \
-	  if test -n "$(DOC_MODULE_VERSION)"; then \
-	    installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
-	  else \
-	    installdir="$(DESTDIR)$(TARGET_DIR)"; \
-	  fi; \
-	  $(mkinstalldirs) $${installdir} ; \
-	  for i in $$installfiles; do \
-	    echo '-- Installing '$$i ; \
-	    $(INSTALL_DATA) $$i $${installdir}; \
-	  done; \
-	  if test -n "$(DOC_MODULE_VERSION)"; then \
-	    mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
-	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
-	    mv -f $${installdir}/$(DOC_MODULE).devhelp \
-	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp; \
-	  fi; \
-	  $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
-	fi
-
-uninstall-local:
-	@if test -n "$(DOC_MODULE_VERSION)"; then \
-	  installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
-	else \
-	  installdir="$(DESTDIR)$(TARGET_DIR)"; \
-	fi; \
-	rm -rf $${installdir}
-
-#
-# Require gtk-doc when making dist
-#
-if ENABLE_GTK_DOC
-dist-check-gtkdoc:
-else
-dist-check-gtkdoc:
-	@echo "*** gtk-doc must be installed and enabled in order to make dist"
-	@false
-endif
-
-dist-hook: dist-check-gtkdoc dist-hook-local
-	mkdir $(distdir)/html
-	cp $(srcdir)/html/* $(distdir)/html
-	-cp $(srcdir)/$(DOC_MODULE).pdf $(distdir)/
-	-cp $(srcdir)/$(DOC_MODULE).types $(distdir)/
-	-cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/
-	cd $(distdir) && rm -f $(DISTCLEANFILES)
-	$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html
-
-.PHONY : dist-hook-local docs
diff --git a/m4/gtk-doc.m4 b/m4/gtk-doc.m4
deleted file mode 100644
index 2cfa1e71..00000000
--- a/m4/gtk-doc.m4
+++ /dev/null
@@ -1,61 +0,0 @@
-dnl -*- mode: autoconf -*-
-
-# serial 1
-
-dnl Usage:
-dnl   GTK_DOC_CHECK([minimum-gtk-doc-version])
-AC_DEFUN([GTK_DOC_CHECK],
-[
-  AC_BEFORE([AC_PROG_LIBTOOL],[$0])dnl setup libtool first
-  AC_BEFORE([AM_PROG_LIBTOOL],[$0])dnl setup libtool first
-
-  dnl check for tools we added during development
-  AC_PATH_PROG([GTKDOC_CHECK],[gtkdoc-check])
-  AC_PATH_PROGS([GTKDOC_REBASE],[gtkdoc-rebase],[true])
-  AC_PATH_PROG([GTKDOC_MKPDF],[gtkdoc-mkpdf])
-
-  dnl for overriding the documentation installation directory
-  AC_ARG_WITH([html-dir],
-    AS_HELP_STRING([--with-html-dir=PATH], [path to installed docs]),,
-    [with_html_dir='${datadir}/gtk-doc/html'])
-  HTML_DIR="$with_html_dir"
-  AC_SUBST([HTML_DIR])
-
-  dnl enable/disable documentation building
-  AC_ARG_ENABLE([gtk-doc],
-    AS_HELP_STRING([--enable-gtk-doc],
-                   [use gtk-doc to build documentation [[default=no]]]),,
-    [enable_gtk_doc=no])
-
-  if test x$enable_gtk_doc = xyes; then
-    ifelse([$1],[],
-      [PKG_CHECK_EXISTS([gtk-doc],,
-                        AC_MSG_ERROR([gtk-doc not installed and --enable-gtk-doc requested]))],
-      [PKG_CHECK_EXISTS([gtk-doc >= $1],,
-                        AC_MSG_ERROR([You need to have gtk-doc >= $1 installed to build $PACKAGE_NAME]))])
-  fi
-
-  AC_MSG_CHECKING([whether to build gtk-doc documentation])
-  AC_MSG_RESULT($enable_gtk_doc)
-
-  dnl enable/disable output formats
-  AC_ARG_ENABLE([gtk-doc-html],
-    AS_HELP_STRING([--enable-gtk-doc-html],
-                   [build documentation in html format [[default=yes]]]),,
-    [enable_gtk_doc_html=yes])
-    AC_ARG_ENABLE([gtk-doc-pdf],
-      AS_HELP_STRING([--enable-gtk-doc-pdf],
-                     [build documentation in pdf format [[default=no]]]),,
-      [enable_gtk_doc_pdf=no])
-
-  if test -z "$GTKDOC_MKPDF"; then
-    enable_gtk_doc_pdf=no
-  fi
-
-
-  AM_CONDITIONAL([ENABLE_GTK_DOC], [test x$enable_gtk_doc = xyes])
-  AM_CONDITIONAL([GTK_DOC_BUILD_HTML], [test x$enable_gtk_doc_html = xyes])
-  AM_CONDITIONAL([GTK_DOC_BUILD_PDF], [test x$enable_gtk_doc_pdf = xyes])
-  AM_CONDITIONAL([GTK_DOC_USE_LIBTOOL], [test -n "$LIBTOOL"])
-  AM_CONDITIONAL([GTK_DOC_USE_REBASE], [test -n "$GTKDOC_REBASE"])
-])