Installation instructions ========================= CrystFEL installation is easiest on GNU/Linux. Installation on Mac OS X is supported, but more difficult because you have to get all the dependencies from a third-party repository. Installation in Windows via [Windows Subsystem for Linux](https://docs.microsoft.com/en-us/windows/wsl/) is also possible. Supported installations at facilities ------------------------------------- Before starting, check the [list of facility installations](https://www.desy.de/~twhite/crystfel/facilities.html) to find out if there's already a CrystFEL installation available at your site. If you want to use CrystFEL on a facility computer system, we recommend leaving the installation to facility IT staff. This means that a single installation can be shared and maintained. In addition, installing software from source, on a system where you don't have administrative access, can be quite difficult. Please feel free to tell the IT staff to get in touch with us for assistance, and also to make sure that the installation is documented on the list of supported facility installations. Dependencies ------------ There are very few mandatory dependencies for CrystFEL. They are: * [Meson](https://mesonbuild.com/) 0.55.0 or later * [GNU Scientific Library (GSL)](https://www.gnu.org/software/gsl/) * [Bison](https://www.gnu.org/software/bison/) 2.6 or later * [Flex](https://www.gnu.org/software/flex/) [CMake](https://cmake.org/) 3.12 or later can be used in place of Meson, but Meson is strongly preferred. CrystFEL's CMake-based build system is considered deprecated and will be removed at some point in the future. It already lacks several features compared to the Meson-based system. The following dependencies are "optional", in the sense that you can install CrystFEL without them. However, a CrystFEL installation without these will lack important features such as the graphical user interface. The following list is roughly in order of importance: * [HDF5](https://www.hdfgroup.org/downloads/hdf5/) 1.8.0 or later (required for HDF5 file read/write. Version 1.10.0 or later is required for many recent data formats which use the 'virtual data set' feature) * [GTK](https://gtk.org/) version between 3.12 and 3.24 inclusive (required for GUI) * [Cairo](https://www.cairographics.org/) 1.2 or later (required for GUI) * [Pango](https://pango.gnome.org/) 1.0 or later, including [PangoCairo](https://docs.gtk.org/PangoCairo/) (required for GUI) * [gdk-pixbuf](https://docs.gtk.org/gdk-pixbuf/) 2.0 or later (required for GUI) * [libccp4](ftp://ftp.ccp4.ac.uk/opensource/) \[\*\] (required for MTZ import/export) * [XGandalf](https://stash.desy.de/users/gevorkov/repos/xgandalf) \[\*\] (for `xgandalf` indexing) * [Zlib](https://www.zlib.net/) \[\*\] (required for reading gzipped CBF files. Version 1.2.3.5 or later preferred for better decompression speed) * [PinkIndexer](https://stash.desy.de/users/gevorkov/repos/pinkindexer) \[\*\] (for indexing electron or wide bandwidth diffraction patterns) * [FFTW](http://fftw.org/) 3.0 or later (required for `asdf` indexing) * [FDIP](https://stash.desy.de/users/gevorkov/repos/fastdiffractionimageprocessing/) \[\*\] (for `peakFinder9` peak search algorithm) * [libZMQ](https://github.com/zeromq/libzmq/) (for online data streaming) * [msgpack-c](https://github.com/msgpack/msgpack-c) (for online data streaming) * [OpenCL](https://www.khronos.org/opencl/) plus appropriate GPU drivers (for GPU-accelerated pattern simulation) Most of the dependencies mentioned above should be available from your Linux distribution's package manager, or from [Homebrew](https://brew.sh/) on Mac OS. We emphatically recommend against trying to install GTK, Cairo, Pango or gdk-pixbuf from source. If you compile using Meson, dependencies marked with \[\*\] above will be downloaded and compiled automatically if they are not available on the system. If you don't want this, add option `--wrap-mode=nofallback` when invoking Meson. See the Meson manual for other possibilities, such as using locally-provided files instead of downloading them. If you install libraries in a non-system location, set `PKG_CONFIG_PATH` so that they can be found. For example: ``` $ export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/home/user/xgandalf/lib64/pkgconfig ``` If the libraries are automatically installed by Meson (see above about \[\*\]), you will not have to worry about this. We also do not recommend using dependencies from Conda/Anaconda. Do not activate any Conda environment before compiling CrystFEL, not even the "base" environment. Don't even "source" the Conda setup file before installing CrystFEL - keep it completely separate. A Conda recipe for CrystFEL might be coming soon, though, if development resources allow for it. Installing the indexing engines ------------------------------- Processing data relies on indexing 'engines'. By default, you will have access to the [TakeTwo](https://journals.iucr.org/d/issues/2016/08/00/rr5128/) indexing algorithm. Some of the optional dependencies listed above, if found, will add more indexing algorithms. In addition, the following programs will be used for indexing if they are available: * [Mosflm](https://www.mrc-lmb.cam.ac.uk/mosflm/mosflm/) * [DirAx](http://www.crystal.chem.uu.nl/distr/dirax/) * [XDS](http://xds.mpimf-heidelberg.mpg.de/) * [Felix](https://doi.org/10.1107/S1600576717007506) You can install these at any time before or after installing CrystFEL. Note that you only need the Mosflm binary, not the full `iMosflm` user interface. [Download it here](https://www.mrc-lmb.cam.ac.uk/mosflm/mosflm/ver740/pre-built/mosflm-linux-64-noX11.zip). You probably have CCP4 installed already, with its own copy of `mosflm`. However, you should keep your CCP4 installation separate from CrystFEL. The reason is that CCP4 comes with its own private copies of all its dependencies, and it becomes very difficult to make the build process for CrystFEL (or anything else) find the right versions of everything. Do not 'source' the CCP4 setup file before trying to install CrystFEL, and make sure that the setup file is not automatically referenced in your shell setup files (`.bashrc` and others). The script `install-indexers`, found in the `scripts` directory of the CrystFEL source code, can help you to install Mosflm, DirAx and XDS. Run `scripts/install-indexers --help` for information. Compiling without HDF5 ---------------------- When building with Meson, it's possible to compile without HDF5. This is useful if you only need to use other file formats, e.g. CBF. You may have noticed that most compilation problems (see *Notes about strange problems* below) are related to HDF5. To build without HDF5, set up your build directory as follows, replacing the `meson build` step: ``` meson build -Dhdf5=disabled ``` When building with CMake, HDF5 is a mandatory dependency. Using OpenCL for GPU acceleration --------------------------------- OpenCL is disabled by default when building with Meson, to keep things simple for the majority of people who don't need it. To enable it, add `-Dopencl=enabled` to the `meson` command line: ``` meson build -Dopencl=enabled ``` When building with CMake, OpenCL will always be used if the libraries are found. Fedora 22 or later ------------------ All dependencies can be taken from the Fedora repositories: ``` $ sudo dnf group install 'Development Tools' $ sudo dnf install hdf5-devel gsl-devel gtk3-devel cairo-devel pango-devel gdk-pixbuf2-devel meson gcc-c++ fftw-devel zeromq-devel msgpack-devel flex bison $ cd /home/user/downloads/crystfel $ meson build $ ninja -C build $ sudo ninja -C build install ``` Up to Fedora 32 (inclusive), you can also install `libccp4-devel` via `dnf`. This package was removed starting from Fedora 33, but CrystFEL's build system will take care of it. Ubuntu 18.04 LTS ("Bionic") and 20.04 LTS ("Focal") --------------------------------------------------- The Meson version in these Ubuntu releases is slightly too old for CrystFEL. Install version 0.55.0 or later from the [Meson website](https://mesonbuild.com/Getting-meson.html). You don't need to "install" it, but do remember the location where you unpacked it. You will need to additionally install `python3`, if it's not already present. All other dependencies are available in the Ubuntu repositories. Make sure that the "universe" repository is enabled - [instructions here](https://help.ubuntu.com/community/Repositories/Ubuntu). ``` $ apt install -y build-essential libhdf5-dev libgsl-dev \ libgtk-3-dev libcairo2-dev libpango1.0-dev \ libgdk-pixbuf2.0-dev libfftw3-dev \ git flex bison libzmq3-dev libmsgpack-dev \ libeigen3-dev libccp4-dev \ ninja-build python3 $ cd /home/user/downloads/crystfel $ /home/user/downloads/meson/meson.py build $ ninja -C build $ sudo ninja -C build install $ sudo ldconfig ``` CrystFEL will install the remaining dependencies (Xgandalf, PinkIndexer, FDIP) automatically as part of its build process. Ubuntu 16.04 LTS ("Xenial") -------------------------- The Meson version in Ubuntu 16.04 is too old for CrystFEL, and unfortunately the Python version is also "end of life" and too old for recent versions of Meson. However, the last release of Meson before it became incompatible with older Python versions, 0.56.2, is new enough to build CrystFEL. Ninja is not available in this Ubuntu release, but fortunately it's an easy download. The Eigen version is too old for XGandalf and PinkIndexer, so you should not install Eigen from Ubuntu (`libeigen3-dev`), instead let Meson take care of it during the build process. Finally, the dynamic library loader has to be made aware that libraries have been installed under `/usr/local`. ``` $ apt install -y build-essential libhdf5-dev libgsl-dev \ libgtk-3-dev libcairo2-dev libpango1.0-dev \ libgdk-pixbuf2.0-dev libfftw3-dev \ git flex bison libzmq3-dev libmsgpack-dev \ libccp4-dev wget python3 unzip $ wget https://github.com/mesonbuild/meson/releases/download/0.56.2/meson-0.56.2.tar.gz $ tar -xzf meson-0.56.2.tar.gz $ export MESON=`pwd`/meson-0.56.2/meson.py $ wget https://github.com/ninja-build/ninja/releases/download/v1.10.2/ninja-linux.zip $ unzip ninja-linux.zip $ export NINJA=`pwd`/ninja $ cd /home/user/downloads/crystfel $ $MESON build $ $NINJA -C build $ sudo $NINJA -C build install $ sudo echo "/usr/local/lib/x86_64-linux-gnu/" > /etc/ld.so.conf.d/local.conf $ sudo ldconfig ``` Debian 11 (Bullseye) -------------------- All dependencies can be taken from the Debain repositories: ``` $ sudo apt install -y build-essential libhdf5-dev libgsl-dev \ libgtk-3-dev libcairo2-dev libpango1.0-dev \ libgdk-pixbuf2.0-dev libfftw3-dev \ git flex bison libzmq3-dev libmsgpack-dev \ libeigen3-dev libccp4-dev \ meson ninja-build $ cd /home/user/downloads/crystfel $ meson build $ ninja -C build $ sudo ninja -C build install $ sudo ldconfig ``` Mac OS X -------- First install [Homebrew](https://brew.sh/), which will also cause [Xcode](https://developer.apple.com/xcode/) to be installed. Then: ``` $ brew install gsl hdf5 flex bison argp-standalone pkg-config doxygen gtk+3 cairo pango gdk-pixbuf fftw meson $ export PATH="$(brew --prefix)/opt/bison/bin:$(brew --prefix)/opt/flex/bin:$PATH" $ export LDFLAGS="-L$(brew --prefix)/opt/bison/lib -L$(brew --prefix)/opt/flex/lib -L$(brew --prefix)/opt/argp-standalone/lib -largp $LDFLAGS" $ export CFLAGS="-I$(brew --prefix)/opt/flex/include -I$(brew --prefix)/opt/argp-standalone/include/ $CFLAGS" $ cd /home/user/downloads/crystfel $ meson build $ ninja -C build $ ninja -C build install ``` The `export` commands ensure that the libraries installed via Homebrew can be found by CrystFEL's build system. Starting up ----------- Run `indexamajig` for a basic check that the installation has succeeded. A healthy newborn CrystFEL should complain that `You need to provide the input filename (use -i)` when run with no other command-line options. Alternatively, run `crystfel` to start the graphical user interface, provided that the dependencies for the GUI were met (see above). Refer to the tutorial to see where to go from here! Finding syminfo.lib ------------------- The CCP4 libraries need to refer to symmetry information in a file called `syminfo.lib`. Unfortunately, they can only find this file if either `CLIBD` or `SYMINFO` are set in the environment. The CrystFEL GUI (`crystfel`), `get_hkl` and `mosflm` therefore all need this variable to be set. You could set this variable in your shell setup file (e.g. as part of a `module load`), or create wrapper scripts for these three programs. The `install-indexers` script, which assists with installing indexing engines, creates such a wrapper for Mosflm already. Notes about strange problems ---------------------------- The following problems are usually only encountered when installing dependencies manually, in non-standard locations and with multiple conflicting parallel installations of certain dependencies. * **Problem**: Linker error about HDF5 and `fPIC`: ``` /usr/bin/ld: /lib/libhdf5.a(H5.o): relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC ``` **Explanation**: The dependency libraries, including HDF5, GSL and FFTW, must be built such that they can be used from within CrystFEL's shared library *libcrystfel*. In particular, they must be compiled into relocatable code (position-independent code, hence 'PIC'). This is usually (but not always!) the case when the libraries are built as shared objects ("`.so`"), but not for static-linking libraries ("`.a`"). HDF5's `h5cc` tool prefers to use static linking by default, and the preference gets picked up and used by Meson for CrystFEL. However, because *libcrystfel* is itself a shared library, this will only work if the HDF5 static-linking library was compiled with `-fPIC`. **Solution**: When building HDF5, disable the static linking libraries altogether, to force the use of shared libraries: `./configure --enable-shared --disable-static`. Alternatively, add the `-fPIC` option so that the static libraries can be used within *libcrystfel*: `./configure H5_CFLAGS=-fPIC`. Compiling HDF5 using CMake also avoids the problem. * **Problem**: Linker error about FFTW and `fPIC`: ``` /usr/bin/ld: /usr/lib/libfftw3.a(mapflags.o): relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC /usr/lib/libfftw3.a: could not read symbols: Bad value ``` **Explanation**: As above. **Solution**: When building FFTW: `./configure --enabled-shared`. * **Problem**: Compiler error about `getpgrp`: ``` ../libcrystfel/src/utils.c: In function ‘progress_bar’: ../libcrystfel/src/utils.c:383:2: error: too few arguments to function ‘getpgrp’ if ( tcgetpgrp(STDERR_FILENO) != getpgrp() ) return; ^ ```` **Explanation**: This one is is quite complicated, and ultimately due to a misfeature of the HDF5 build process. The compiler flags for HDF5, set via the `CFLAGS` environment variable while compiling HDF5, are tracked through into the output of the `h5cc` compiler driver program. From here, they get picked up by Meson and added to the compiler flags for CrystFEL. It's not obvious from the HDF5 documentation, but `H5_CFLAGS` should be used instead of `CFLAGS` for controlling how HDF5 itself is compiled. `H5_CFLAGS` are private to HDF5, whereas `CFLAGS` get added to `h5cc`. Several Linux distributions, including Arch and CentOS, apparently set some problematic flags in `CFLAGS`. One such flag is `-D_BSD_SOURCE`, which changes the prototypes of certain system calls including `getpgrp`, breaking CrystFEL. **Solution**: Three options: Option 1: Do not use your distribution's HDF5 package. Instead, compile HDF5 yourself. If you compile HDF5 with autotools (`./configure` et al.), take care to use `H5_CFLAGS` instead of `CFLAGS` to add any compiler flags. Ensure that the `h5cc` corresponding to the correct version of HDF5 is found, by making sure that its location comes first in `PATH` when compiling CrystFEL. Option 2: Compile HDF5 using CMake instead of autotools. In this case, HDF5 will install a `pkg-config` file which Meson will use in preference to `h5cc`. Option 3: Compile CrystFEL using CMake instead of Meson. CMake extracts the include paths from the `h5cc` output and ignores the others. However, note that CrystFEL's CMake build process is deprecated and will eventually be removed. * **Problem**: Linker error about missing HDF5 symbols: ``` libcrystfel/libcrystfel.so.0.9.1: undefined reference to `H5P_CLS_LINK_CREATE_ID_g' libcrystfel/libcrystfel.so.0.9.1: undefined reference to `H5Oget_info_by_idx1' ``` **Explanation**: CrystFEL was accidentally compiled with headers from a new HDF5 version (1.10 or higher) but linked with an older one (1.8 or lower). This can happen if there are headers in the include path corresponding to an HDF5 installation different to the one found during the configuration step of CrystFEL's build process. **Solution**: Ensure that HDF5 is found consistently: Make sure that the `pkg-config` file (`libhdf5.pc` or `libhdf5-.pc`) exists and is found correctly (set `PKG_CONFIG_PATH`). Make sure that `PATH` is set so that the location of the correct version of `h5cc` comes first. * **Problem**: After fixing the above problem, there is still a complaint about HDF5: `H5Oget_info_by_idx` (note: no `1` at the end). **Explanation**: This change to the HDF5 headers seems to confuse `ccache`. **Solution**: The (somewhat drastic) fix is simply to `rm -rf ~/.ccache`. * **Problem**: After all of the above, HDF5 is *still* not found correctly. **Explanation**: The `pkg-config` files for HDF5, if they exist, might contain the version number. Example: `libhdf5-1.12.0.pc`. This makes them difficult to find using `pkg-config`, because you have to know the version number in advance! For example, `pkg-config --cflags libhdf5-1.12.0`. **Solution**: Upgrade to Meson 0.53.0 or later, which is aware of this quirk and looks for any HDF5 `pkg-config` file.