[SCSI] fusion - mpi header udpate

This updates mpi headers in fusion drivers to version 1.5.12.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

8 files changed, 554 insertions, 102 deletions

diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index b61e3d17507..02cdc840a06 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    mpi.h Version:  01.05.08
+ *    mpi.h Version:  01.05.10
  *
  *  Version History
  *  ---------------
@@ -74,6 +74,8 @@
  *  06-24-05  01.05.08  Added function codes for SCSI IO 32 and
  *                      TargetAssistExtended requests.
  *                      Added EEDP IOCStatus codes.
+ *  08-03-05  01.05.09  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-30-05  01.05.10  Added 2 new IOCStatus codes for Target.
  *  --------------------------------------------------------------------------
  */
 
@@ -104,7 +106,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x0A)
+#define MPI_HEADER_VERSION_UNIT             (0x0C)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)
@@ -711,6 +713,8 @@ typedef struct _MSG_DEFAULT_REPLY
 #define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR   (0x006D)
 #define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
 #define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT        (0x006F)
+#define MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT     (0x0070)
+#define MPI_IOCSTATUS_TARGET_NAK_RECEIVED        (0x0071)
 
 /****************************************************************************/
 /*  Additional FCP target values (obsolete)                                 */
@@ -745,7 +749,7 @@ typedef struct _MSG_DEFAULT_REPLY
 #define MPI_IOCSTATUS_LAN_CANCELED              (0x0087)
 
 /****************************************************************************/
-/*  Serial Attached SCSI values                                                              */
+/*  Serial Attached SCSI values                                             */
 /****************************************************************************/
 
 #define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED    (0x0090)
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index d8339896f73..b1becec27e1 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Config message, structures, and Pages
  *  Creation Date:  July 27, 2000
  *
- *    mpi_cnfg.h Version:  01.05.09
+ *    mpi_cnfg.h Version:  01.05.11
  *
  *  Version History
  *  ---------------
@@ -249,6 +249,23 @@
  *                      Added OwnerDevHandle and Flags field to SAS PHY Page 0.
  *                      Added IOC GPIO Flags define to SAS Enclosure Page 0.
  *                      Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
+ *  08-03-05  01.05.10  Removed ISDataScrubRate and ISResyncRate from
+ *                      Manufacturing Page 4.
+ *                      Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
+ *                      Added NumDevsPerEnclosure field to SAS IO Unit page 2.
+ *                      Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
+ *                      define.
+ *                      Added EnclosureHandle field to SAS Expander page 0.
+ *                      Removed redundant NumTableEntriesProg field from SAS
+ *                      Expander Page 1.
+ *  08-30-05  01.05.11  Added DeviceID for FC949E and changed the DeviceID for
+ *                      SAS1078.
+ *                      Added more defines for Manufacturing Page 4 Flags field.
+ *                      Added more defines for IOCSettings and added
+ *                      ExpanderSpinup field to Bios Page 1.
+ *                      Added postpone SATA Init bit to SAS IO Unit Page 1
+ *                      ControlFlags.
+ *                      Changed LogEntry format for Log Page 0.
  *  --------------------------------------------------------------------------
  */
 
@@ -494,7 +511,7 @@ typedef struct _MSG_CONFIG_REPLY
 #define MPI_MANUFACTPAGE_DEVICEID_FC929X            (0x0626)
 #define MPI_MANUFACTPAGE_DEVICEID_FC939X            (0x0642)
 #define MPI_MANUFACTPAGE_DEVICEID_FC949X            (0x0640)
-#define MPI_MANUFACTPAGE_DEVICEID_FC949ES           (0x0646)
+#define MPI_MANUFACTPAGE_DEVICEID_FC949E            (0x0646)
 /* SCSI */
 #define MPI_MANUFACTPAGE_DEVID_53C1030              (0x0030)
 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC            (0x0031)
@@ -510,7 +527,7 @@ typedef struct _MSG_CONFIG_REPLY
 #define MPI_MANUFACTPAGE_DEVID_SAS1066E             (0x005A)
 #define MPI_MANUFACTPAGE_DEVID_SAS1068              (0x0054)
 #define MPI_MANUFACTPAGE_DEVID_SAS1068E             (0x0058)
-#define MPI_MANUFACTPAGE_DEVID_SAS1078              (0x0060)
+#define MPI_MANUFACTPAGE_DEVID_SAS1078              (0x0062)
 
 
 typedef struct _CONFIG_PAGE_MANUFACTURING_0
@@ -602,9 +619,7 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
     U32                             IMVolumeSettings;   /* 50h */
     U32                             Reserved3;          /* 54h */
     U32                             Reserved4;          /* 58h */
-    U8                              ISDataScrubRate;    /* 5Ch */
-    U8                              ISResyncRate;       /* 5Dh */
-    U16                             Reserved5;          /* 5Eh */
+    U32                             Reserved5;          /* 5Ch */
     U8                              IMEDataScrubRate;   /* 60h */
     U8                              IMEResyncRate;      /* 61h */
     U16                             Reserved6;          /* 62h */
@@ -616,9 +631,14 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
   ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
 
-#define MPI_MANUFACTURING4_PAGEVERSION                  (0x02)
+#define MPI_MANUFACTURING4_PAGEVERSION                  (0x03)
 
 /* defines for the Flags field */
+#define MPI_MANPAGE4_IME_DISABLE                        (0x20)
+#define MPI_MANPAGE4_IM_DISABLE                         (0x10)
+#define MPI_MANPAGE4_IS_DISABLE                         (0x08)
+#define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE               (0x04)
+#define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE             (0x02)
 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA                 (0x01)
 
 
@@ -669,7 +689,7 @@ typedef struct _CONFIG_PAGE_IO_UNIT_1
 } CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1,
   IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t;
 
-#define MPI_IOUNITPAGE1_PAGEVERSION                     (0x01)
+#define MPI_IOUNITPAGE1_PAGEVERSION                     (0x02)
 
 /* IO Unit Page 1 Flags defines */
 #define MPI_IOUNITPAGE1_MULTI_FUNCTION                  (0x00000000)
@@ -681,7 +701,7 @@ typedef struct _CONFIG_PAGE_IO_UNIT_1
 #define MPI_IOUNITPAGE1_DISABLE_IR                      (0x00000040)
 #define MPI_IOUNITPAGE1_FORCE_32                        (0x00000080)
 #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE        (0x00000100)
-
+#define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE        (0x00000200)
 
 typedef struct _MPI_ADAPTER_INFO
 {
@@ -968,7 +988,8 @@ typedef struct _CONFIG_PAGE_BIOS_1
     U32                     Reserved1;                  /* 0Ch */
     U32                     DeviceSettings;             /* 10h */
     U16                     NumberOfDevices;            /* 14h */
-    U16                     Reserved2;                  /* 16h */
+    U8                      ExpanderSpinup;             /* 16h */
+    U8                      Reserved2;                  /* 17h */
     U16                     IOTimeoutBlockDevicesNonRM; /* 18h */
     U16                     IOTimeoutSequential;        /* 1Ah */
     U16                     IOTimeoutOther;             /* 1Ch */
@@ -976,7 +997,7 @@ typedef struct _CONFIG_PAGE_BIOS_1
 } CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
   BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
 
-#define MPI_BIOSPAGE1_PAGEVERSION                       (0x02)
+#define MPI_BIOSPAGE1_PAGEVERSION                       (0x03)
 
 /* values for the BiosOptions field */
 #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE                (0x00000400)
@@ -985,8 +1006,15 @@ typedef struct _CONFIG_PAGE_BIOS_1
 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS              (0x00000001)
 
 /* values for the IOCSettings field */
+#define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY  (0x0F000000)
+#define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24)
+
 #define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY     (0x00F00000)
 #define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY    (20)
+
+#define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE           (0x00080000)
+#define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE  (0x00040000)
+
 #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE       (0x00030000)
 #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT        (0x00000000)
 #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT           (0x00010000)
@@ -1016,6 +1044,11 @@ typedef struct _CONFIG_PAGE_BIOS_1
 #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN         (0x00000002)
 #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN          (0x00000001)
 
+/* defines for the ExpanderSpinup field */
+#define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET         (0xF0)
+#define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET        (4)
+#define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY              (0x0F)
+
 typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER
 {
     U32         Reserved1;                              /* 00h */
@@ -1233,13 +1266,13 @@ typedef struct _CONFIG_PAGE_SCSI_PORT_0
 
 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD     (8)
 #define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap)      \
-    (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MIN_SYNC_PERIOD) \
+    (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \
     >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD          \
     )
 #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK      (0x00FF0000)
 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET     (16)
 #define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap)      \
-    (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MAX_SYNC_OFFSET) \
+    (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \
     >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET          \
     )
 #define MPI_SCSIPORTPAGE0_CAP_IDP                       (0x08000000)
@@ -2370,47 +2403,48 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
 } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
   SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
 
-#define MPI_SASIOUNITPAGE1_PAGEVERSION      (0x04)
+#define MPI_SASIOUNITPAGE1_PAGEVERSION      (0x05)
 
 /* values for SAS IO Unit Page 1 ControlFlags */
-#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST        (0x8000)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX            (0x4000)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX            (0x2000)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE        (0x1000)
-#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH        (0x0800)
-
-#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT        (0x0600)
-#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT       (9)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH        (0x00)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT         (0x01)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT        (0x02)
-
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED     (0x0040)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED       (0x0020)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED       (0x0010)
-#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH   (0x0008)
-#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL     (0x0004)
-#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY     (0x0002)
-#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION       (0x0001)
+#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST            (0x8000)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX                (0x4000)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX                (0x2000)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE            (0x1000)
+#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH            (0x0800)
+
+#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT            (0x0600)
+#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT           (9)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH            (0x00)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT             (0x01)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT            (0x02)
+
+#define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT          (0x0100)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED     (0x0080)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED         (0x0040)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED           (0x0020)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED           (0x0010)
+#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH       (0x0008)
+#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL         (0x0004)
+#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY         (0x0002)
+#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION           (0x0001)
 
 /* values for SAS IO Unit Page 1 PortFlags */
-#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM     (0x00)
-#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM     (0x04)
-#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG     (0x01)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM         (0x00)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM         (0x04)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG         (0x01)
 
 /* values for SAS IO Unit Page 0 PhyFlags */
-#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE           (0x04)
-#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT             (0x02)
-#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT             (0x01)
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE               (0x04)
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT                 (0x02)
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT                 (0x01)
 
 /* values for SAS IO Unit Page 0 MaxMinLinkRate */
-#define MPI_SAS_IOUNIT1_MAX_RATE_MASK                   (0xF0)
-#define MPI_SAS_IOUNIT1_MAX_RATE_1_5                    (0x80)
-#define MPI_SAS_IOUNIT1_MAX_RATE_3_0                    (0x90)
-#define MPI_SAS_IOUNIT1_MIN_RATE_MASK                   (0x0F)
-#define MPI_SAS_IOUNIT1_MIN_RATE_1_5                    (0x08)
-#define MPI_SAS_IOUNIT1_MIN_RATE_3_0                    (0x09)
+#define MPI_SAS_IOUNIT1_MAX_RATE_MASK                       (0xF0)
+#define MPI_SAS_IOUNIT1_MAX_RATE_1_5                        (0x80)
+#define MPI_SAS_IOUNIT1_MAX_RATE_3_0                        (0x90)
+#define MPI_SAS_IOUNIT1_MIN_RATE_MASK                       (0x0F)
+#define MPI_SAS_IOUNIT1_MIN_RATE_1_5                        (0x08)
+#define MPI_SAS_IOUNIT1_MIN_RATE_3_0                        (0x09)
 
 /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
 
@@ -2418,16 +2452,18 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
 {
     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
-    U32                                 Reserved1;              /* 08h */
+    U8                                  NumDevsPerEnclosure;    /* 08h */
+    U8                                  Reserved1;              /* 09h */
+    U16                                 Reserved2;              /* 0Ah */
     U16                                 MaxPersistentIDs;       /* 0Ch */
     U16                                 NumPersistentIDsUsed;   /* 0Eh */
     U8                                  Status;                 /* 10h */
     U8                                  Flags;                  /* 11h */
-    U16                                 MaxNumPhysicalMappedIDs;/* 12h */              /* 12h */
+    U16                                 MaxNumPhysicalMappedIDs;/* 12h */
 } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
   SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
 
-#define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x04)
+#define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x05)
 
 /* values for SAS IO Unit Page 2 Status field */
 #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
@@ -2441,6 +2477,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
 #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP                   (0x00)
 #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP        (0x01)
 #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP       (0x02)
+#define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP        (0x07)
 
 #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT         (0x10)
 #define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT              (0x20)
@@ -2473,7 +2510,7 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
     U8                                  PhysicalPort;           /* 08h */
     U8                                  Reserved1;              /* 09h */
-    U16                                 Reserved2;              /* 0Ah */
+    U16                                 EnclosureHandle;        /* 0Ah */
     U64                                 SASAddress;             /* 0Ch */
     U32                                 DiscoveryStatus;        /* 14h */
     U16                                 DevHandle;              /* 18h */
@@ -2487,7 +2524,7 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
 } CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0,
   SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t;
 
-#define MPI_SASEXPANDER0_PAGEVERSION        (0x02)
+#define MPI_SASEXPANDER0_PAGEVERSION        (0x03)
 
 /* values for SAS Expander Page 0 DiscoveryStatus field */
 #define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED              (0x00000001)
@@ -2527,9 +2564,9 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_1
     U8                          NegotiatedLinkRate;     /* 1Fh */
     U8                          PhyIdentifier;          /* 20h */
     U8                          AttachedPhyIdentifier;  /* 21h */
-    U8                          NumTableEntriesProg;    /* 22h */
+    U8                          Reserved3;              /* 22h */
     U8                          DiscoveryInfo;          /* 23h */
-    U32                         Reserved3;              /* 24h */
+    U32                         Reserved4;              /* 24h */
 } CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1,
   SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t;
 
@@ -2766,16 +2803,15 @@ typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
 #define MPI_LOG_0_NUM_LOG_ENTRIES        (1)
 #endif
 
-#define MPI_LOG_0_LOG_DATA_LENGTH        (20)
+#define MPI_LOG_0_LOG_DATA_LENGTH        (0x1C)
 
 typedef struct _MPI_LOG_0_ENTRY
 {
-    U64         WWID;                               /* 00h */
-    U32         TimeStamp;                          /* 08h */
-    U32         Reserved1;                          /* 0Ch */
-    U16         LogSequence;                        /* 10h */
-    U16         LogEntryQualifier;                  /* 12h */
-    U8          LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 14h */
+    U32         TimeStamp;                          /* 00h */
+    U32         Reserved1;                          /* 04h */
+    U16         LogSequence;                        /* 08h */
+    U16         LogEntryQualifier;                  /* 0Ah */
+    U8          LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */
 } MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY,
   MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t;
 
@@ -2794,7 +2830,7 @@ typedef struct _CONFIG_PAGE_LOG_0
 } CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0,
   LogPage0_t, MPI_POINTER pLogPage0_t;
 
-#define MPI_LOG_0_PAGEVERSION               (0x00)
+#define MPI_LOG_0_PAGEVERSION               (0x01)
 
 
 #endif
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 1a30ef16adb..4a5f8dd1d76 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -6,25 +6,25 @@
  Copyright (c) 2000-2005 LSI Logic Corporation.
 
  ---------------------------------------
- Header Set Release Version:    01.05.10
- Header Set Release Date:       03-11-05
+ Header Set Release Version:    01.05.12
+ Header Set Release Date:       08-30-05
  ---------------------------------------
 
  Filename               Current version     Prior version
  ----------             ---------------     -------------
- mpi.h                  01.05.08            01.05.07
- mpi_ioc.h              01.05.09            01.05.08
- mpi_cnfg.h             01.05.09            01.05.08
- mpi_init.h             01.05.05            01.05.04
- mpi_targ.h             01.05.05            01.05.04
+ mpi.h                  01.05.10            01.05.09
+ mpi_ioc.h              01.05.10            01.05.09
+ mpi_cnfg.h             01.05.11            01.05.10
+ mpi_init.h             01.05.06            01.05.06
+ mpi_targ.h             01.05.05            01.05.05
  mpi_fc.h               01.05.01            01.05.01
  mpi_lan.h              01.05.01            01.05.01
  mpi_raid.h             01.05.02            01.05.02
  mpi_tool.h             01.05.03            01.05.03
  mpi_inb.h              01.05.01            01.05.01
- mpi_sas.h              01.05.01            01.05.01
- mpi_type.h             01.05.01            01.05.01
- mpi_history.txt        01.05.09            01.05.09
+ mpi_sas.h              01.05.02            01.05.01
+ mpi_type.h             01.05.02            01.05.01
+ mpi_history.txt        01.05.12            01.05.11
 
 
  *  Date      Version   Description
@@ -91,6 +91,8 @@ mpi.h
  *  06-24-05  01.05.08  Added function codes for SCSI IO 32 and
  *                      TargetAssistExtended requests.
  *                      Added EEDP IOCStatus codes.
+ *  08-03-05  01.05.09  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-30-05  01.05.10  Added 2 new IOCStatus codes for Target.
  *  --------------------------------------------------------------------------
 
 mpi_ioc.h
@@ -164,6 +166,10 @@ mpi_ioc.h
  *                      Removed IOCFacts Reply EEDP Capability bit.
  *  06-24-05  01.05.09  Added 5 new IOCFacts Reply IOCCapabilities bits.
  *                      Added Max SATA Targets to SAS Discovery Error event.
+ *  08-30-05  01.05.10  Added 4 new events and their event data structures.
+ *                      Added new ReasonCode value for SAS Device Status Change
+ *                      event.
+ *                      Added new family code for FC949E.
  *  --------------------------------------------------------------------------
 
 mpi_cnfg.h
@@ -402,6 +408,23 @@ mpi_cnfg.h
  *                      Added OwnerDevHandle and Flags field to SAS PHY Page 0.
  *                      Added IOC GPIO Flags define to SAS Enclosure Page 0.
  *                      Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
+ *  08-03-05  01.05.10  Removed ISDataScrubRate and ISResyncRate from
+ *                      Manufacturing Page 4.
+ *                      Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
+ *                      Added NumDevsPerEnclosure field to SAS IO Unit page 2.
+ *                      Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
+ *                      define.
+ *                      Added EnclosureHandle field to SAS Expander page 0.
+ *                      Removed redundant NumTableEntriesProg field from SAS
+ *                      Expander Page 1.
+ *  08-30-05  01.05.11  Added DeviceID for FC949E and changed the DeviceID for
+ *                      SAS1078.
+ *                      Added more defines for Manufacturing Page 4 Flags field.
+ *                      Added more defines for IOCSettings and added
+ *                      ExpanderSpinup field to Bios Page 1.
+ *                      Added postpone SATA Init bit to SAS IO Unit Page 1
+ *                      ControlFlags.
+ *                      Changed LogEntry format for Log Page 0.
  *  --------------------------------------------------------------------------
 
 mpi_init.h
@@ -442,6 +465,8 @@ mpi_init.h
  *                      addressing.
  *  06-24-05  01.05.05  Added SCSI IO 32 structures and defines.
  *                      Added four new defines for SEP SlotStatus.
+ *  08-03-05  01.05.06  Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
+ *                      unique in the first 32 characters.
  *  --------------------------------------------------------------------------
 
 mpi_targ.h
@@ -582,6 +607,9 @@ mpi_inb.h
 
 mpi_sas.h
  *  08-19-04  01.05.01  Original release.
+ *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
+ *                      Added PrimFlags and Primitive field to SAS IO Unit
+ *                      Control request, and added a new operation code.
  *  --------------------------------------------------------------------------
 
 mpi_type.h
@@ -592,24 +620,25 @@ mpi_type.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *  05-11-04  01.03.01  Original release for MPI v1.3.
  *  08-19-04  01.05.01  Original release for MPI v1.5.
+ *  08-30-05  01.05.02  Added PowerPC option to #ifdef's.
  *  --------------------------------------------------------------------------
 
 mpi_history.txt         Parts list history
 
-Filename    01.05.10  01.05.09
-----------  --------  --------
-mpi.h       01.05.08  01.05.07
-mpi_ioc.h   01.05.09  01.05.08
-mpi_cnfg.h  01.05.09  01.05.08
-mpi_init.h  01.05.05  01.05.04
-mpi_targ.h  01.05.05  01.05.04
-mpi_fc.h    01.05.01  01.05.01
-mpi_lan.h   01.05.01  01.05.01
-mpi_raid.h  01.05.02  01.05.02
-mpi_tool.h  01.05.03  01.05.03
-mpi_inb.h   01.05.01  01.05.01
-mpi_sas.h   01.05.01  01.05.01
-mpi_type.h  01.05.01  01.05.01
+Filename    01.05.12  01.05.11  01.05.10  01.05.09
+----------  --------  --------  --------  --------
+mpi.h       01.05.10  01.05.09  01.05.08  01.05.07
+mpi_ioc.h   01.05.10  01.05.09  01.05.09  01.05.08
+mpi_cnfg.h  01.05.11  01.05.10  01.05.09  01.05.08
+mpi_init.h  01.05.06  01.05.06  01.05.05  01.05.04
+mpi_targ.h  01.05.05  01.05.05  01.05.05  01.05.04
+mpi_fc.h    01.05.01  01.05.01  01.05.01  01.05.01
+mpi_lan.h   01.05.01  01.05.01  01.05.01  01.05.01
+mpi_raid.h  01.05.02  01.05.02  01.05.02  01.05.02
+mpi_tool.h  01.05.03  01.05.03  01.05.03  01.05.03
+mpi_inb.h   01.05.01  01.05.01  01.05.01  01.05.01
+mpi_sas.h   01.05.02  01.05.01  01.05.01  01.05.01
+mpi_type.h  01.05.02  01.05.01  01.05.01  01.05.01
 
 Filename    01.05.08   01.05.07   01.05.06   01.05.05   01.05.04   01.05.03
 ----------  --------   --------   --------   --------   --------   --------
diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h
index d5af75afbd9..68941f459ca 100644
--- a/drivers/message/fusion/lsi/mpi_init.h
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -6,7 +6,7 @@
  *          Title:  MPI initiator mode messages and structures
  *  Creation Date:  June 8, 2000
  *
- *    mpi_init.h Version:  01.05.05
+ *    mpi_init.h Version:  01.05.06
  *
  *  Version History
  *  ---------------
@@ -50,6 +50,8 @@
  *                      addressing.
  *  06-24-05  01.05.05  Added SCSI IO 32 structures and defines.
  *                      Added four new defines for SEP SlotStatus.
+ *  08-03-05  01.05.06  Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
+ *                      unique in the first 32 characters.
  *  --------------------------------------------------------------------------
  */
 
@@ -290,8 +292,8 @@ typedef struct _MSG_SCSI_IO32_REQUEST
 
 /* SCSI IO 32 MsgFlags bits */
 #define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH                (0x01)
-#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_32             (0x00)
-#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_64             (0x01)
+#define MPI_SCSIIO32_MSGFLGS_32_SENSE_WIDTH             (0x00)
+#define MPI_SCSIIO32_MSGFLGS_64_SENSE_WIDTH             (0x01)
 
 #define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION             (0x02)
 #define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST             (0x00)
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index 93b70e2b426..2c5f43fa7c7 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -6,7 +6,7 @@
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  August 11, 2000
  *
- *    mpi_ioc.h Version:  01.05.09
+ *    mpi_ioc.h Version:  01.05.10
  *
  *  Version History
  *  ---------------
@@ -83,6 +83,10 @@
  *                      Removed IOCFacts Reply EEDP Capability bit.
  *  06-24-05  01.05.09  Added 5 new IOCFacts Reply IOCCapabilities bits.
  *                      Added Max SATA Targets to SAS Discovery Error event.
+ *  08-30-05  01.05.10  Added 4 new events and their event data structures.
+ *                      Added new ReasonCode value for SAS Device Status Change
+ *                      event.
+ *                      Added new family code for FC949E.
  *  --------------------------------------------------------------------------
  */
 
@@ -464,6 +468,10 @@ typedef struct _MSG_EVENT_ACK_REPLY
 #define MPI_EVENT_PERSISTENT_TABLE_FULL     (0x00000011)
 #define MPI_EVENT_SAS_PHY_LINK_STATUS       (0x00000012)
 #define MPI_EVENT_SAS_DISCOVERY_ERROR       (0x00000013)
+#define MPI_EVENT_IR_RESYNC_UPDATE          (0x00000014)
+#define MPI_EVENT_IR2                       (0x00000015)
+#define MPI_EVENT_SAS_DISCOVERY             (0x00000016)
+#define MPI_EVENT_LOG_ENTRY_ADDED           (0x00000021)
 
 /* AckRequired field values */
 
@@ -480,6 +488,29 @@ typedef struct _EVENT_DATA_EVENT_CHANGE
 } EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE,
   EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t;
 
+/* LogEntryAdded Event data */
+
+/* this structure matches MPI_LOG_0_ENTRY in mpi_cnfg.h */
+#define MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH    (0x1C)
+typedef struct _EVENT_DATA_LOG_ENTRY
+{
+    U32         TimeStamp;                          /* 00h */
+    U32         Reserved1;                          /* 04h */
+    U16         LogSequence;                        /* 08h */
+    U16         LogEntryQualifier;                  /* 0Ah */
+    U8          LogData[MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH]; /* 0Ch */
+} EVENT_DATA_LOG_ENTRY, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY,
+  MpiEventDataLogEntry_t, MPI_POINTER pMpiEventDataLogEntry_t;
+
+typedef struct _EVENT_DATA_LOG_ENTRY_ADDED
+{
+    U16                     LogSequence;            /* 00h */
+    U16                     Reserved1;              /* 02h */
+    U32                     Reserved2;              /* 04h */
+    EVENT_DATA_LOG_ENTRY    LogEntry;               /* 08h */
+} EVENT_DATA_LOG_ENTRY_ADDED, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY_ADDED,
+  MpiEventDataLogEntryAdded_t, MPI_POINTER pMpiEventDataLogEntryAdded_t;
+
 /* SCSI Event data for Port, Bus and Device forms */
 
 typedef struct _EVENT_DATA_SCSI
@@ -538,6 +569,7 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
 #define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA            (0x05)
 #define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED      (0x06)
 #define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED           (0x07)
+#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
 
 
 /* SCSI Event data for Queue Full event */
@@ -579,6 +611,79 @@ typedef struct _EVENT_DATA_RAID
 #define MPI_EVENT_RAID_RC_SMART_DATA                    (0x0A)
 #define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED        (0x0B)
 
+
+/* MPI Integrated RAID Resync Update Event data */
+
+typedef struct _MPI_EVENT_DATA_IR_RESYNC_UPDATE
+{
+    U8                      VolumeID;                   /* 00h */
+    U8                      VolumeBus;                  /* 01h */
+    U8                      ResyncComplete;             /* 02h */
+    U8                      Reserved1;                  /* 03h */
+    U32                     Reserved2;                  /* 04h */
+} MPI_EVENT_DATA_IR_RESYNC_UPDATE,
+  MPI_POINTER PTR_MPI_EVENT_DATA_IR_RESYNC_UPDATE,
+  MpiEventDataIrResyncUpdate_t, MPI_POINTER pMpiEventDataIrResyncUpdate_t;
+
+/* MPI IR2 Event data */
+
+/* MPI_LD_STATE or MPI_PD_STATE */
+typedef struct _IR2_STATE_CHANGED
+{
+    U16                 PreviousState;  /* 00h */
+    U16                 NewState;       /* 02h */
+} IR2_STATE_CHANGED, MPI_POINTER PTR_IR2_STATE_CHANGED;
+
+typedef struct _IR2_PD_INFO
+{
+    U16                 DeviceHandle;           /* 00h */
+    U8                  TruncEnclosureHandle;   /* 02h */
+    U8                  TruncatedSlot;          /* 03h */
+} IR2_PD_INFO, MPI_POINTER PTR_IR2_PD_INFO;
+
+typedef union _MPI_IR2_RC_EVENT_DATA
+{
+    IR2_STATE_CHANGED   StateChanged;
+    U32                 Lba;
+    IR2_PD_INFO         PdInfo;
+} MPI_IR2_RC_EVENT_DATA, MPI_POINTER PTR_MPI_IR2_RC_EVENT_DATA;
+
+typedef struct _MPI_EVENT_DATA_IR2
+{
+    U8                      TargetID;             /* 00h */
+    U8                      Bus;                  /* 01h */
+    U8                      ReasonCode;           /* 02h */
+    U8                      PhysDiskNum;          /* 03h */
+    MPI_IR2_RC_EVENT_DATA   IR2EventData;         /* 04h */
+} MPI_EVENT_DATA_IR2, MPI_POINTER PTR_MPI_EVENT_DATA_IR2,
+  MpiEventDataIR2_t, MPI_POINTER pMpiEventDataIR2_t;
+
+/* MPI IR2 Event data ReasonCode values */
+#define MPI_EVENT_IR2_RC_LD_STATE_CHANGED           (0x01)
+#define MPI_EVENT_IR2_RC_PD_STATE_CHANGED           (0x02)
+#define MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL       (0x03)
+#define MPI_EVENT_IR2_RC_PD_INSERTED                (0x04)
+#define MPI_EVENT_IR2_RC_PD_REMOVED                 (0x05)
+#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED       (0x06)
+#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR       (0x07)
+
+/* defines for logical disk states */
+#define MPI_LD_STATE_OPTIMAL                        (0x00)
+#define MPI_LD_STATE_DEGRADED                       (0x01)
+#define MPI_LD_STATE_FAILED                         (0x02)
+#define MPI_LD_STATE_MISSING                        (0x03)
+#define MPI_LD_STATE_OFFLINE                        (0x04)
+
+/* defines for physical disk states */
+#define MPI_PD_STATE_ONLINE                         (0x00)
+#define MPI_PD_STATE_MISSING                        (0x01)
+#define MPI_PD_STATE_NOT_COMPATIBLE                 (0x02)
+#define MPI_PD_STATE_FAILED                         (0x03)
+#define MPI_PD_STATE_INITIALIZING                   (0x04)
+#define MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST        (0x05)
+#define MPI_PD_STATE_FAILED_AT_HOST_REQUEST         (0x06)
+#define MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON     (0xFF)
+
 /* MPI Link Status Change Event data */
 
 typedef struct _EVENT_DATA_LINK_STATUS
@@ -660,6 +765,20 @@ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
 #define MPI_EVENT_SAS_PLS_LR_RATE_1_5                       (0x08)
 #define MPI_EVENT_SAS_PLS_LR_RATE_3_0                       (0x09)
 
+/* SAS Discovery Event data */
+
+typedef struct _EVENT_DATA_SAS_DISCOVERY
+{
+    U32                     DiscoveryStatus;            /* 00h */
+    U32                     Reserved1;                  /* 04h */
+} EVENT_DATA_SAS_DISCOVERY, MPI_POINTER PTR_EVENT_DATA_SAS_DISCOVERY,
+  EventDataSasDiscovery_t, MPI_POINTER pEventDataSasDiscovery_t;
+
+#define MPI_EVENT_SAS_DSCVRY_COMPLETE                       (0x00000000)
+#define MPI_EVENT_SAS_DSCVRY_IN_PROGRESS                    (0x00000001)
+#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK                  (0xFFFF0000)
+#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT                 (16)
+
 /* SAS Discovery Errror Event data */
 
 typedef struct _EVENT_DATA_DISCOVERY_ERROR
@@ -869,6 +988,7 @@ typedef struct _MPI_FW_HEADER
 #define MPI_FW_HEADER_PID_FAMILY_919XL_FC       (0x0003) /* 919XL and 929XL */
 #define MPI_FW_HEADER_PID_FAMILY_939X_FC        (0x0004) /* 939X and 949X   */
 #define MPI_FW_HEADER_PID_FAMILY_959_FC         (0x0005)
+#define MPI_FW_HEADER_PID_FAMILY_949E_FC        (0x0006)
 /* SAS */
 #define MPI_FW_HEADER_PID_FAMILY_1064_SAS       (0x0001)
 #define MPI_FW_HEADER_PID_FAMILY_1068_SAS       (0x0002)
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
new file mode 100644
index 00000000000..dc98d46f907
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -0,0 +1,89 @@
+/*
+ *  Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved.
+ *
+ *  NAME:           fc_log.h
+ *  SUMMARY:        MPI IocLogInfo definitions for the SYMFC9xx chips
+ *  DESCRIPTION:    Contains the enumerated list of values that may be returned
+ *                  in the IOCLogInfo field of a MPI Default Reply Message.
+ *
+ *  CREATION DATE:  6/02/2000
+ *  ID:             $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
+ */
+
+
+/*
+ * MpiIocLogInfo_t enum
+ *
+ * These 32 bit values are used in the IOCLogInfo field of the MPI reply
+ * messages.
+ * The value is 0xabcccccc where
+ *          a = The type of log info as per the MPI spec. Since these codes are
+ *              all for Fibre Channel this value will always be 2.
+ *          b = Specifies a subclass of the firmware where
+ *                  0 = FCP Initiator
+ *                  1 = FCP Target
+ *                  2 = LAN
+ *                  3 = MPI Message Layer
+ *                  4 = FC Link
+ *                  5 = Context Manager
+ *                  6 = Invalid Field Offset
+ *                  7 = State Change Info
+ *                  all others are reserved for future use
+ *          c = A specific value within the subclass.
+ *
+ * NOTE: Any new values should be added to the end of each subclass so that the
+ *       codes remain consistent across firmware releases.
+ */
+typedef enum _MpiIocLogInfoFc
+{
+    MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
+    MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN         = 0x20000007, /* Scatter Gather overrun  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS      = 0x20000008, /* Receiver detected context mismatch via invalid header */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE       = 0x2000000A, /* Link failure occurred  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT         = 0x2000000B, /* Transmitter timeout error */
+
+    MPI_IOCLOGINFO_FC_TARGET_BASE                   = 0x21000000,
+    MPI_IOCLOGINFO_FC_TARGET_NO_PDISC               = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
+    MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN               = 0x21000002, /* not sent because we are not logged in to the remote node */
+    MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP     = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP     = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA      = 0x21000005, /* Data In, Auto Response, missing data frames */
+    MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP     = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP     = 0x21000007, /* Auto-response after a write not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP     = 0x21000008, /* Data In, No Response, not completed due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA      = 0x21000009, /* Data In, No Response, missing data frames */
+    MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP     = 0x2100000a, /* Manual Response not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3             = 0x2100000b, /* not sent because remote node does not support Class 3 */
+    MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID        = 0x2100000c, /* not sent because login to remote node not validated */
+    MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND          = 0x2100000e, /* cleared from the outbound queue after a logout */
+    MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN    = 0x2100000f, /* cleared waiting for data after a logout */
+
+    MPI_IOCLOGINFO_FC_LAN_BASE                      = 0x22000000,
+    MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING         = 0x22000001, /* Transaction Context Sgl Missing */
+    MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE         = 0x22000002, /* Transaction Context found before an EOB */
+    MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET        = 0x22000003, /* Transaction Context value has reserved bits set */
+    MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG            = 0x22000004, /* Invalid SGL Flags */
+
+    MPI_IOCLOGINFO_FC_MSG_BASE                      = 0x23000000,
+
+    MPI_IOCLOGINFO_FC_LINK_BASE                     = 0x24000000,
+    MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT        = 0x24000001, /* Loop initialization timed out */
+    MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED      = 0x24000002, /* Another system controller already initialized the loop */
+    MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED     = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
+    MPI_IOCLOGINFO_FC_LINK_CRC_ERROR                = 0x24000004, /* CRC check detected error on received frame */
+
+    MPI_IOCLOGINFO_FC_CTX_BASE                      = 0x25000000,
+
+    MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET     = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
+    MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET      = 0x26ffffff,
+
+    MPI_IOCLOGINFO_FC_STATE_CHANGE                  = 0x27000000  /* The lower 24 bits give additional information concerning state change */
+
+} MpiIocLogInfoFc_t;
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
new file mode 100644
index 00000000000..9259d1ad6e6
--- /dev/null
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -0,0 +1,162 @@
+
+/***************************************************************************
+ *                                                                         *
+ *  Copyright 2003 LSI Logic Corporation.  All rights reserved.            *
+ *                                                                         *
+ *  This file is confidential and a trade secret of LSI Logic.  The        *
+ *  receipt of or possession of this file does not convey any rights to    *
+ *  reproduce or disclose its contents or to manufacture, use, or sell     *
+ *  anything it may describe, in whole, or in part, without the specific   *
+ *  written consent of LSI Logic Corporation.                              *
+ *                                                                         *
+ ***************************************************************************
+ *
+ *           Name:  iopiIocLogInfo.h
+ *          Title:  SAS Firmware IOP Interface IOC Log Info Definitions
+ *     Programmer:  Guy Kendall
+ *  Creation Date:  September 24, 2003
+ *
+ *  Version History
+ *  ---------------
+ *
+ *  Last Updated
+ *  -------------
+ *  Version         %version: 22 %
+ *  Date Updated    %date_modified: %
+ *  Programmer      %created_by: nperucca %
+ *
+ *  Date      Who   Description
+ *  --------  ---   -------------------------------------------------------
+ *  09/24/03  GWK   Initial version
+ *
+ *
+ * Description
+ * ------------
+ * This include file contains SAS firmware interface IOC Log Info codes
+ *
+ *-------------------------------------------------------------------------
+ */
+
+#ifndef IOPI_IOCLOGINFO_H_INCLUDED
+#define IOPI_IOCLOGINFO_H_INCLUDED
+
+
+/****************************************************************************/
+/*  IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF                            */
+/*  Format:                                                                 */
+/*      Bits 31-28: MPI_IOCLOGINFO_TYPE_SAS (3)                             */
+/*      Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR               */
+/*      Bits 23-16: LOGINFO_CODE                                            */
+/*      Bits 15-0:  LOGINFO_CODE Specific                                   */
+/****************************************************************************/
+
+/****************************************************************************/
+/* IOC_LOGINFO_ORIGINATOR defines                                           */
+/****************************************************************************/
+#define IOC_LOGINFO_ORIGINATOR_IOP                      (0x00000000)
+#define IOC_LOGINFO_ORIGINATOR_PL                       (0x01000000)
+#define IOC_LOGINFO_ORIGINATOR_IR                       (0x02000000)
+
+/****************************************************************************/
+/* LOGINFO_CODE defines                                                     */
+/****************************************************************************/
+#define IOC_LOGINFO_CODE_MASK                           (0x00FF0000)
+#define IOC_LOGINFO_CODE_SHIFT                          (16)
+
+/****************************************************************************/
+/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP          */
+/****************************************************************************/
+#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS            (0x00010000)
+#define IOP_LOGINFO_CODE_UNUSED2                        (0x00020000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE            (0x00030000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT         (0x00030100) /* Route Table Entry not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN         (0x00030200) /* Invalid Page Number */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM       (0x00030300) /* Invalid FORM */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT         (0x00030400) /* Invalid Page Type */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM        (0x00030500) /* Device Not Mapped */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST    (0x00030600) /* Persistent Page not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT    (0x00030700) /* Default Page not found */
+#define IOP_LOGINFO_CODE_TASK_TERMINATED                (0x00050000)
+
+
+/****************************************************************************/
+/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL            */
+/****************************************************************************/
+#define PL_LOGINFO_CODE_OPEN_FAILURE                        (0x00010000)
+#define PL_LOGINFO_CODE_INVALID_SGL                         (0x00020000)
+#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH       (0x00030000)
+#define PL_LOGINFO_CODE_FRAME_XFER_ERROR                    (0x00040000)
+#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW                 (0x00050000)
+#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET         (0x00060000)
+#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR      (0x00070000)
+#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR     (0x00080000)
+#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS     (0x00090000)
+#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE               (0x000A0000)
+#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR          (0x000B0000)
+#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR           (0x000C0000)
+#define PL_LOGINFO_CODE_SATA_LINK_DOWN                      (0x000D0000)
+#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS           (0x000E0000)
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE                 (0x000F0000)
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT              (0x000F0100) /* Invalid Page Type */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS        (0x000F0200) /* Invalid Number of Phys */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP         (0x000F0300) /* Case Not Handled */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV          (0x000F0400) /* No Device Found */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM            (0x000F0500) /* Invalid FORM */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY             (0x000F0600) /* Invalid Phy */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER        (0x000F0700) /* No Owner Found */
+#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT            (0x00100000)
+#define PL_LOGINFO_CODE_RESET                               (0x00110000)
+#define PL_LOGINFO_CODE_ABORT                               (0x00120000)
+#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED                 (0x00130000)
+#define PL_LOGINFO_CODE_IO_EXECUTED                         (0x00140000)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE                    (0x00000100)
+#define PL_LOGINFO_SUB_CODE_INVALID_SGL                     (0x00000200)
+#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH   (0x00000300)
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                (0x00000400)
+#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW             (0x00000500)
+#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET     (0x00000600)
+#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR  (0x00000700)
+#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
+#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
+#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE           (0x00000A00)
+#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR      (0x00000B00)
+#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR       (0x00000C00)
+#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN                  (0x00000D00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS       (0x00000E00)
+#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT        (0x00001000)
+
+
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE         (0x00200000) /* Can't get SMP Frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR            (0x00200001) /* Error occured on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR           (0x00200002) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL     (0x00200004) /* Encl Mgmt services not available for this WWID */
+#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED   (0x00200005) /* Address Mode not suppored */
+#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM              (0x00200006) /* Invalid Slot Number in SEP Msg */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT         (0x00200007) /* SGPIO not present/enabled */
+
+#define PL_LOGINFO_DA_SEP_NOT_PRESENT                       (0x00200100) /* SEP not present when msg received */
+#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR               (0x00200101) /* Can only accept 1 msg at a time */
+#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE          (0x00200102) /* ISTWI interrupt recvd. while IDLE */
+#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE          (0x00200103) /* SEP NACK'd, it is busy */
+#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM             (0x00200104) /* SEP stopped or sent bad chksum in Hdr */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1         (0x00200105) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2         (0x00200106) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP           (0x00200107) /* SEP returned bad chksum after STOP */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA   (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/
+
+
+/****************************************************************************/
+/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR            */
+/****************************************************************************/
+#define IR_LOGINFO_CODE_UNUSED1                         (0x00010000)
+#define IR_LOGINFO_CODE_UNUSED2                         (0x00020000)
+
+/****************************************************************************/
+/* Defines for convienence                                                  */
+/****************************************************************************/
+#define IOC_LOGINFO_PREFIX_IOP                          ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP)
+#define IOC_LOGINFO_PREFIX_PL                           ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL)
+#define IOC_LOGINFO_PREFIX_IR                           ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IR)
+
+#endif /* end of file */
+
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h
index 230fa69b535..70514867bdd 100644
--- a/drivers/message/fusion/lsi/mpi_sas.h
+++ b/drivers/message/fusion/lsi/mpi_sas.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Serial Attached SCSI structures and definitions
  *  Creation Date:  August 19, 2004
  *
- *    mpi_sas.h Version:  01.05.01
+ *    mpi_sas.h Version:  01.05.02
  *
  *  Version History
  *  ---------------
@@ -14,6 +14,9 @@
  *  Date      Version   Description
  *  --------  --------  ------------------------------------------------------
  *  08-19-04  01.05.01  Original release.
+ *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
+ *                      Added PrimFlags and Primitive field to SAS IO Unit
+ *                      Control request, and added a new operation code.
  *  --------------------------------------------------------------------------
  */
 
@@ -51,6 +54,7 @@
  * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
  * data and SAS IO Unit Configuration pages.
  */
+#define MPI_SAS_DEVICE_INFO_SEP                 (0x00004000)
 #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
 #define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
 #define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH       (0x00000800)
@@ -212,20 +216,26 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
     U8                      TargetID;           /* 0Ch */
     U8                      Bus;                /* 0Dh */
     U8                      PhyNum;             /* 0Eh */
-    U8                      Reserved4;          /* 0Fh */
-    U32                     Reserved5;          /* 10h */
+    U8                      PrimFlags;          /* 0Fh */
+    U32                     Primitive;          /* 10h */
     U64                     SASAddress;         /* 14h */
-    U32                     Reserved6;          /* 1Ch */
+    U32                     Reserved4;          /* 1Ch */
 } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
   SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
 
 /* values for the Operation field */
-#define MPI_SAS_OP_CLEAR_NOT_PRESENT             (0x01)
-#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT          (0x02)
-#define MPI_SAS_OP_PHY_LINK_RESET                (0x06)
-#define MPI_SAS_OP_PHY_HARD_RESET                (0x07)
-#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG           (0x08)
-#define MPI_SAS_OP_MAP_CURRENT                   (0x09)
+#define MPI_SAS_OP_CLEAR_NOT_PRESENT            (0x01)
+#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT         (0x02)
+#define MPI_SAS_OP_PHY_LINK_RESET               (0x06)
+#define MPI_SAS_OP_PHY_HARD_RESET               (0x07)
+#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG          (0x08)
+#define MPI_SAS_OP_MAP_CURRENT                  (0x09)
+#define MPI_SAS_OP_SEND_PRIMITIVE               (0x0A)
+
+/* values for the PrimFlags field */
+#define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
+#define MPI_SAS_PRIMFLAGS_TRIPLE                (0x02)
+#define MPI_SAS_PRIMFLAGS_REDUNDANT             (0x01)
 
 
 /* SAS IO Unit Control Reply */