Merge branch 'linus' into x86/urgent

55 files changed, 2148 insertions, 2800 deletions

diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875
index a0cd8af2f40..10ca43cd1a7 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/i2c/chips/max6875
@@ -49,7 +49,7 @@ $ modprobe max6875 force=0,0x50
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.
-The even-address instance is called 'max6875', the odd one is 'max6875 subclient'.
+The even-address instance is called 'max6875', the odd one is 'dummy'.
 
 
 Programming the chip using i2c-dev
diff --git a/Documentation/i2c/chips/pca9539 b/Documentation/i2c/chips/pca9539
index 1d81c530c4a..6aff890088b 100644
--- a/Documentation/i2c/chips/pca9539
+++ b/Documentation/i2c/chips/pca9539
@@ -7,7 +7,7 @@ drivers/gpio/pca9539.c instead.
 Supported chips:
   * Philips PCA9539
     Prefix: 'pca9539'
-    Addresses scanned: 0x74 - 0x77
+    Addresses scanned: none
     Datasheet:
         http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf
 
@@ -23,6 +23,14 @@ The input sense can also be inverted.
 The 16 lines are split between two bytes.
 
 
+Detection
+---------
+
+The PCA9539 is difficult to detect and not commonly found in PC machines,
+so you have to pass the I2C bus and address of the installed PCA9539
+devices explicitly to the driver at load time via the force=... parameter.
+
+
 Sysfs entries
 -------------
 
diff --git a/Documentation/i2c/chips/pcf8574 b/Documentation/i2c/chips/pcf8574
index 5c1ad1376b6..235815c075f 100644
--- a/Documentation/i2c/chips/pcf8574
+++ b/Documentation/i2c/chips/pcf8574
@@ -4,13 +4,13 @@ Kernel driver pcf8574
 Supported chips:
   * Philips PCF8574
     Prefix: 'pcf8574'
-    Addresses scanned: I2C 0x20 - 0x27
+    Addresses scanned: none
     Datasheet: Publicly available at the Philips Semiconductors website
                http://www.semiconductors.philips.com/pip/PCF8574P.html
 
  * Philips PCF8574A
     Prefix: 'pcf8574a'
-    Addresses scanned: I2C 0x38 - 0x3f
+    Addresses scanned: none
     Datasheet: Publicly available at the Philips Semiconductors website
                http://www.semiconductors.philips.com/pip/PCF8574P.html
 
@@ -38,12 +38,10 @@ For more informations see the datasheet.
 Accessing PCF8574(A) via /sys interface
 -------------------------------------
 
-! Be careful !
 The PCF8574(A) is plainly impossible to detect ! Stupid chip.
-So every chip with address in the interval [20..27] and [38..3f] are
-detected as PCF8574(A). If you have other chips in this address
-range, the workaround is to load this module after the one
-for your others chips.
+So, you have to pass the I2C bus and address of the installed PCF857A
+and PCF8574A devices explicitly to the driver at load time via the
+force=... parameter.
 
 On detection (i.e. insmod, modprobe et al.), directories are being
 created for each detected PCF8574(A):
diff --git a/Documentation/i2c/chips/pcf8575 b/Documentation/i2c/chips/pcf8575
index 25f5698a61c..40b268eb276 100644
--- a/Documentation/i2c/chips/pcf8575
+++ b/Documentation/i2c/chips/pcf8575
@@ -40,12 +40,9 @@ Detection
 ---------
 
 There is no method known to detect whether a chip on a given I2C address is
-a PCF8575 or whether it is any other I2C device. So there are two alternatives
-to let the driver find the installed PCF8575 devices:
-- Load this driver after any other I2C driver for I2C devices with addresses
-  in the range 0x20 .. 0x27.
-- Pass the I2C bus and address of the installed PCF8575 devices explicitly to
-  the driver at load time via the probe=... or force=... parameters.
+a PCF8575 or whether it is any other I2C device, so you have to pass the I2C
+bus and address of the installed PCF8575 devices explicitly to the driver at
+load time via the force=... parameter.
 
 /sys interface
 --------------
diff --git a/Makefile b/Makefile
index 8a2a275be30..1564577bdc5 100644
--- a/Makefile
+++ b/Makefile
@@ -508,6 +508,8 @@ else
 KBUILD_CFLAGS	+= -O2
 endif
 
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
 ifneq (CONFIG_FRAME_WARN,0)
 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
@@ -516,8 +518,6 @@ endif
 # Arch Makefiles may override this setting
 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
 
-include $(srctree)/arch/$(SRCARCH)/Makefile
-
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 else
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index d5770fdf7f0..373e993a5ed 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -59,6 +59,7 @@ static void __init ep8248e_pic_init(void)
 	of_node_put(np);
 }
 
+#ifdef CONFIG_FS_ENET_MDIO_FCC
 static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
 {
 	if (level)
@@ -164,6 +165,7 @@ static struct of_platform_driver ep8248e_mdio_driver = {
 	.probe = ep8248e_mdio_probe,
 	.remove = ep8248e_mdio_remove,
 };
+#endif
 
 struct cpm_pin {
 	int port, pin, flags;
@@ -296,7 +298,9 @@ static  __initdata struct of_device_id of_bus_ids[] = {
 static int __init declare_of_platform_devices(void)
 {
 	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+#ifdef CONFIG_FS_ENET_MDIO_FCC
 	of_register_platform_driver(&ep8248e_mdio_driver);
+#endif
 
 	return 0;
 }
diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c
index 466b9ee9279..f97b5b35687 100644
--- a/drivers/hwmon/ad7418.c
+++ b/drivers/hwmon/ad7418.c
@@ -23,12 +23,9 @@
 
 #include "lm75.h"
 
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.4"
 
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END };
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_3(ad7416, ad7417, ad7418);
+enum chips { ad7416, ad7417, ad7418 };
 
 /* AD7418 registers */
 #define AD7418_REG_TEMP_IN	0x00
@@ -46,7 +43,6 @@ static const u8 AD7418_REG_TEMP[] = { AD7418_REG_TEMP_IN,
 					AD7418_REG_TEMP_OS };
 
 struct ad7418_data {
-	struct i2c_client	client;
 	struct device		*hwmon_dev;
 	struct attribute_group	attrs;
 	enum chips		type;
@@ -58,16 +54,25 @@ struct ad7418_data {
 	u16			in[4];
 };
 
-static int ad7418_attach_adapter(struct i2c_adapter *adapter);
-static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind);
-static int ad7418_detach_client(struct i2c_client *client);
+static int ad7418_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int ad7418_remove(struct i2c_client *client);
+
+static const struct i2c_device_id ad7418_id[] = {
+	{ "ad7416", ad7416 },
+	{ "ad7417", ad7417 },
+	{ "ad7418", ad7418 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ad7418_id);
 
 static struct i2c_driver ad7418_driver = {
 	.driver = {
 		.name	= "ad7418",
 	},
-	.attach_adapter	= ad7418_attach_adapter,
-	.detach_client	= ad7418_detach_client,
+	.probe		= ad7418_probe,
+	.remove		= ad7418_remove,
+	.id_table	= ad7418_id,
 };
 
 /* All registers are word-sized, except for the configuration registers.
@@ -192,13 +197,6 @@ static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 1);
 static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 2);
 static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 3);
 
-static int ad7418_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, ad7418_detect);
-}
-
 static struct attribute *ad7416_attributes[] = {
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
@@ -225,98 +223,46 @@ static struct attribute *ad7418_attributes[] = {
 	NULL
 };
 
-static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind)
+static int ad7418_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct ad7418_data *data;
-	int err = 0;
+	int err;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-					I2C_FUNC_SMBUS_WORD_DATA))
+					I2C_FUNC_SMBUS_WORD_DATA)) {
+		err = -EOPNOTSUPP;
 		goto exit;
+	}
 
 	if (!(data = kzalloc(sizeof(struct ad7418_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
 
-	client = &data->client;
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &ad7418_driver;
-
 	i2c_set_clientdata(client, data);
 
 	mutex_init(&data->lock);
-
-	/* AD7418 has a curious behaviour on registers 6 and 7. They
-	 * both always read 0xC071 and are not documented on the datasheet.
-	 * We use them to detect the chip.
-	 */
-	if (kind <= 0) {
-		int reg, reg6, reg7;
-
-		/* the AD7416 lies within this address range, but I have
-		 * no means to check.
-		 */
-		if (address >= 0x48 && address <= 0x4f) {
-			/* XXX add tests for AD7416 here */
-			/* data->type = ad7416; */
-		}
-		/* here we might have AD7417 or AD7418 */
-		else if (address >= 0x28 && address <= 0x2f) {
-			reg6 = i2c_smbus_read_word_data(client, 0x06);
-			reg7 = i2c_smbus_read_word_data(client, 0x07);
-
-			if (address == 0x28 && reg6 == 0xC071 && reg7 == 0xC071)
-				data->type = ad7418;
-
-			/* XXX add tests for AD7417 here */
-
-
-			/* both AD7417 and AD7418 have bits 0-5 of
-			 * the CONF2 register at 0
-			 */
-			reg = i2c_smbus_read_byte_data(client,
-							AD7418_REG_CONF2);
-			if (reg & 0x3F)
-				data->type = any_chip; /* detection failed */
-		}
-	} else {
-		dev_dbg(&adapter->dev, "detection forced\n");
-	}
-
-	if (kind > 0)
-		data->type = kind;
-	else if (kind < 0 && data->type == any_chip) {
-		err = -ENODEV;
-		goto exit_free;
-	}
+	data->type = id->driver_data;
 
 	switch (data->type) {
-	case any_chip:
 	case ad7416:
 		data->adc_max = 0;
 		data->attrs.attrs = ad7416_attributes;
-		strlcpy(client->name, "ad7416", I2C_NAME_SIZE);
 		break;
 
 	case ad7417:
 		data->adc_max = 4;
 		data->attrs.attrs = ad7417_attributes;
-		strlcpy(client->name, "ad7417", I2C_NAME_SIZE);
 		break;
 
 	case ad7418:
 		data->adc_max = 1;
 		data->attrs.attrs = ad7418_attributes;
-		strlcpy(client->name, "ad7418", I2C_NAME_SIZE);
 		break;
 	}
 
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
-
 	dev_info(&client->dev, "%s chip found\n", client->name);
 
 	/* Initialize the AD7418 chip */
@@ -324,7 +270,7 @@ static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -336,20 +282,17 @@ static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int ad7418_detach_client(struct i2c_client *client)
+static int ad7418_remove(struct i2c_client *client)
 {
 	struct ad7418_data *data = i2c_get_clientdata(client);
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &data->attrs);
-	i2c_detach_client(client);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index ecbf69484bf..b11e06f644b 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -78,7 +78,6 @@ clearing it.  Weird, ey?   --Phil  */
 
 /* Each client has this additional data */
 struct adm1021_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	enum chips type;
 
@@ -98,23 +97,42 @@ struct adm1021_data {
 	u8 remote_temp_offset_prec;
 };
 
-static int adm1021_attach_adapter(struct i2c_adapter *adapter);
-static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm1021_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int adm1021_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
 static void adm1021_init_client(struct i2c_client *client);
-static int adm1021_detach_client(struct i2c_client *client);
+static int adm1021_remove(struct i2c_client *client);
 static struct adm1021_data *adm1021_update_device(struct device *dev);
 
 /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
 static int read_only;
 
 
+static const struct i2c_device_id adm1021_id[] = {
+	{ "adm1021", adm1021 },
+	{ "adm1023", adm1023 },
+	{ "max1617", max1617 },
+	{ "max1617a", max1617a },
+	{ "thmc10", thmc10 },
+	{ "lm84", lm84 },
+	{ "gl523sm", gl523sm },
+	{ "mc1066", mc1066 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1021_id);
+
 /* This is the driver that will be inserted */
 static struct i2c_driver adm1021_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adm1021",
 	},
-	.attach_adapter	= adm1021_attach_adapter,
-	.detach_client	= adm1021_detach_client,
+	.probe		= adm1021_probe,
+	.remove		= adm1021_remove,
+	.id_table	= adm1021_id,
+	.detect		= adm1021_detect,
+	.address_data	= &addr_data,
 };
 
 static ssize_t show_temp(struct device *dev,
@@ -216,13 +234,6 @@ static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
 
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
 
-static int adm1021_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, adm1021_detect);
-}
-
 static struct attribute *adm1021_attributes[] = {
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	&sensor_dev_attr_temp1_min.dev_attr.attr,
@@ -243,36 +254,21 @@ static const struct attribute_group adm1021_group = {
 	.attrs = adm1021_attributes,
 };
 
-static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1021_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	int i;
-	struct i2c_client *client;
-	struct adm1021_data *data;
-	int err = 0;
 	const char *type_name = "";
 	int conv_rate, status, config;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		pr_debug("adm1021: detect failed, "
 			 "smbus byte data not supported!\n");
-		goto error0;
-	}
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access adm1021 register values. */
-
-	if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
-		pr_debug("adm1021: detect failed, kzalloc failed!\n");
-		err = -ENOMEM;
-		goto error0;
+		return -ENODEV;
 	}
 
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &adm1021_driver;
 	status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS);
 	conv_rate = i2c_smbus_read_byte_data(client,
 					     ADM1021_REG_CONV_RATE_R);
@@ -284,8 +280,7 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
 		    || (conv_rate & 0xF8) != 0x00) {
 			pr_debug("adm1021: detect failed, "
 				 "chip not detected!\n");
-			err = -ENODEV;
-			goto error1;
+			return -ENODEV;
 		}
 	}
 
@@ -336,24 +331,36 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
 		type_name = "mc1066";
 	}
 	pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
-		 type_name, i2c_adapter_id(adapter), address);
+		 type_name, i2c_adapter_id(adapter), client->addr);
+	strlcpy(info->type, type_name, I2C_NAME_SIZE);
 
-	/* Fill in the remaining client fields */
-	strlcpy(client->name, type_name, I2C_NAME_SIZE);
-	data->type = kind;
-	mutex_init(&data->update_lock);
+	return 0;
+}
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto error1;
+static int adm1021_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adm1021_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL);
+	if (!data) {
+		pr_debug("adm1021: detect failed, kzalloc failed!\n");
+		err = -ENOMEM;
+		goto error0;
+	}
+
+	i2c_set_clientdata(client, data);
+	data->type = id->driver_data;
+	mutex_init(&data->update_lock);
 
 	/* Initialize the ADM1021 chip */
-	if (kind != lm84 && !read_only)
+	if (data->type != lm84 && !read_only)
 		adm1021_init_client(client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &adm1021_group)))
-		goto error2;
+		goto error1;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -365,8 +372,6 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
 
 error3:
 	sysfs_remove_group(&client->dev.kobj, &adm1021_group);
-error2:
-	i2c_detach_client(client);
 error1:
 	kfree(data);
 error0:
@@ -382,17 +387,13 @@ static void adm1021_init_client(struct i2c_client *client)
 	i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
 }
 
-static int adm1021_detach_client(struct i2c_client *client)
+static int adm1021_remove(struct i2c_client *client)
 {
 	struct adm1021_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1021_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 1d76de7d75c..4db04d603ec 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -2,7 +2,7 @@
  * adm1025.c
  *
  * Copyright (C) 2000       Chen-Yuan Wu <gwu@esoft.com>
- * Copyright (C) 2003-2004  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
  *
  * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
  * voltages (including its own power source) and up to two temperatures
@@ -109,22 +109,35 @@ static const int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
  * Functions declaration
  */
 
-static int adm1025_attach_adapter(struct i2c_adapter *adapter);
-static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm1025_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int adm1025_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
 static void adm1025_init_client(struct i2c_client *client);
-static int adm1025_detach_client(struct i2c_client *client);
+static int adm1025_remove(struct i2c_client *client);
 static struct adm1025_data *adm1025_update_device(struct device *dev);
 
 /*
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id adm1025_id[] = {
+	{ "adm1025", adm1025 },
+	{ "ne1619", ne1619 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1025_id);
+
 static struct i2c_driver adm1025_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adm1025",
 	},
-	.attach_adapter	= adm1025_attach_adapter,
-	.detach_client	= adm1025_detach_client,
+	.probe		= adm1025_probe,
+	.remove		= adm1025_remove,
+	.id_table	= adm1025_id,
+	.detect		= adm1025_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -132,7 +145,6 @@ static struct i2c_driver adm1025_driver = {
  */
 
 struct adm1025_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -344,13 +356,6 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
  * Real code
  */
 
-static int adm1025_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, adm1025_detect);
-}
-
 static struct attribute *adm1025_attributes[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in1_input.dev_attr.attr,
@@ -403,31 +408,16 @@ static const struct attribute_group adm1025_group_in4 = {
 	.attrs = adm1025_attributes_in4,
 };
 
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1025_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct adm1025_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
 	const char *name = "";
 	u8 config;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &adm1025_driver;
+		return -ENODEV;
 
 	/*
 	 * Now we do the remaining detection. A negative kind means that
@@ -448,8 +438,8 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
 		     ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
 			dev_dbg(&adapter->dev,
 				"ADM1025 detection failed at 0x%02x.\n",
-				address);
-			goto exit_free;
+				client->addr);
+			return -ENODEV;
 		}
 	}
 
@@ -465,7 +455,7 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
 			}
 		} else
 		if (man_id == 0xA1) { /* Philips */
-			if (address != 0x2E
+			if (client->addr != 0x2E
 			 && (chip_id & 0xF0) == 0x20) { /* NE1619 */
 				kind = ne1619;
 			}
@@ -475,7 +465,7 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
 			dev_info(&adapter->dev,
 			    "Unsupported chip (man_id=0x%02X, "
 			    "chip_id=0x%02X).\n", man_id, chip_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
@@ -484,23 +474,36 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
 	} else if (kind == ne1619) {
 		name = "ne1619";
 	}
+	strlcpy(info->type, name, I2C_NAME_SIZE);
 
-	/* We can fill in the remaining client fields */
-	strlcpy(client->name, name, I2C_NAME_SIZE);
-	mutex_init(&data->update_lock);
+	return 0;
+}
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
+static int adm1025_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adm1025_data *data;
+	int err;
+	u8 config;
+
+	data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
 
 	/* Initialize the ADM1025 chip */
 	adm1025_init_client(client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	/* Pin 11 is either in4 (+12V) or VID4 */
+	config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
 	if (!(config & 0x20)) {
 		if ((err = sysfs_create_group(&client->dev.kobj,
 					      &adm1025_group_in4)))
@@ -518,8 +521,6 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group);
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
@@ -568,18 +569,14 @@ static void adm1025_init_client(struct i2c_client *client)
 					  (reg&0x7E)|0x01);
 }
 
-static int adm1025_detach_client(struct i2c_client *client)
+static int adm1025_remove(struct i2c_client *client)
 {
 	struct adm1025_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group);
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 904c6ce9d83..7fe2441fc84 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -259,7 +259,6 @@ struct pwm_data {
 };
 
 struct adm1026_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 
 	struct mutex update_lock;
@@ -293,10 +292,11 @@ struct adm1026_data {
 	u8 config3;		/* Register value */
 };
 
-static int adm1026_attach_adapter(struct i2c_adapter *adapter);
-static int adm1026_detect(struct i2c_adapter *adapter, int address,
-	int kind);
-static int adm1026_detach_client(struct i2c_client *client);
+static int adm1026_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int adm1026_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
+static int adm1026_remove(struct i2c_client *client);
 static int adm1026_read_value(struct i2c_client *client, u8 reg);
 static int adm1026_write_value(struct i2c_client *client, u8 reg, int value);
 static void adm1026_print_gpio(struct i2c_client *client);
@@ -305,22 +305,24 @@ static struct adm1026_data *adm1026_update_device(struct device *dev);
 static void adm1026_init_client(struct i2c_client *client);
 
 
+static const struct i2c_device_id adm1026_id[] = {
+	{ "adm1026", adm1026 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1026_id);
+
 static struct i2c_driver adm1026_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adm1026",
 	},
-	.attach_adapter = adm1026_attach_adapter,
-	.detach_client	= adm1026_detach_client,
+	.probe		= adm1026_probe,
+	.remove		= adm1026_remove,
+	.id_table	= adm1026_id,
+	.detect		= adm1026_detect,
+	.address_data	= &addr_data,
 };
 
-static int adm1026_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON)) {
-		return 0;
-	}
-	return i2c_probe(adapter, &addr_data, adm1026_detect);
-}
-
 static int adm1026_read_value(struct i2c_client *client, u8 reg)
 {
 	int res;
@@ -1647,48 +1649,32 @@ static const struct attribute_group adm1026_group_in8_9 = {
 	.attrs = adm1026_attributes_in8_9,
 };
 
-static int adm1026_detect(struct i2c_adapter *adapter, int address,
-			  int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1026_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
+	struct i2c_adapter *adapter = client->adapter;
+	int address = client->addr;
 	int company, verstep;
-	struct i2c_client *client;
-	struct adm1026_data *data;
-	int err = 0;
-	const char *type_name = "";
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		/* We need to be able to do byte I/O */
-		goto exit;
+		return -ENODEV;
 	};
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access adm1026_{read,write}_value. */
-
-	if (!(data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &adm1026_driver;
-
 	/* Now, we do the remaining detection. */
 
 	company = adm1026_read_value(client, ADM1026_REG_COMPANY);
 	verstep = adm1026_read_value(client, ADM1026_REG_VERSTEP);
 
-	dev_dbg(&client->dev, "Detecting device at %d,0x%02x with"
+	dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
 		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
 		i2c_adapter_id(client->adapter), client->addr,
 		company, verstep);
 
 	/* If auto-detecting, Determine the chip type. */
 	if (kind <= 0) {
-		dev_dbg(&client->dev, "Autodetecting device at %d,0x%02x "
+		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x "
 			"...\n", i2c_adapter_id(adapter), address);
 		if (company == ADM1026_COMPANY_ANALOG_DEV
 		    && verstep == ADM1026_VERSTEP_ADM1026) {
@@ -1704,7 +1690,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address,
 				verstep);
 			kind = any_chip;
 		} else {
-			dev_dbg(&client->dev, ": Autodetection "
+			dev_dbg(&adapter->dev, ": Autodetection "
 				"failed\n");
 			/* Not an ADM1026 ... */
 			if (kind == 0) { /* User used force=x,y */
@@ -1713,33 +1699,29 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address,
 					"force_adm1026.\n",
 					i2c_adapter_id(adapter), address);
 			}
-			goto exitfree;
+			return -ENODEV;
 		}
 	}
+	strlcpy(info->type, "adm1026", I2C_NAME_SIZE);
 
-	/* Fill in the chip specific driver values */
-	switch (kind) {
-	case any_chip :
-		type_name = "adm1026";
-		break;
-	case adm1026 :
-		type_name = "adm1026";
-		break;
-	default :
-		dev_err(&adapter->dev, ": Internal error, invalid "
-			"kind (%d)!\n", kind);
-		err = -EFAULT;
-		goto exitfree;
+	return 0;
+}
+
+static int adm1026_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adm1026_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
 	}
-	strlcpy(client->name, type_name, I2C_NAME_SIZE);
 
-	/* Fill in the remaining client fields */
+	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exitfree;
-
 	/* Set the VRM version */
 	data->vrm = vid_which_vrm();
 
@@ -1748,7 +1730,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address,
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &adm1026_group)))
-		goto exitdetach;
+		goto exitfree;
 	if (data->config1 & CFG1_AIN8_9)
 		err = sysfs_create_group(&client->dev.kobj,
 					 &adm1026_group_in8_9);
@@ -1773,15 +1755,13 @@ exitremove:
 		sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9);
 	else
 		sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3);
-exitdetach:
-	i2c_detach_client(client);
 exitfree:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int adm1026_detach_client(struct i2c_client *client)
+static int adm1026_remove(struct i2c_client *client)
 {
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	hwmon_device_unregister(data->hwmon_dev);
@@ -1790,7 +1770,6 @@ static int adm1026_detach_client(struct i2c_client *client)
 		sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9);
 	else
 		sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3);
-	i2c_detach_client(client);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index 2c6608d453c..ba84ca5923f 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -115,9 +115,11 @@ static const u8 ADM1029_REG_FAN_DIV[] = {
  * Functions declaration
  */
 
-static int adm1029_attach_adapter(struct i2c_adapter *adapter);
-static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind);
-static int adm1029_detach_client(struct i2c_client *client);
+static int adm1029_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int adm1029_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
+static int adm1029_remove(struct i2c_client *client);
 static struct adm1029_data *adm1029_update_device(struct device *dev);
 static int adm1029_init_client(struct i2c_client *client);
 
@@ -125,12 +127,22 @@ static int adm1029_init_client(struct i2c_client *client);
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id adm1029_id[] = {
+	{ "adm1029", adm1029 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1029_id);
+
 static struct i2c_driver adm1029_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name = "adm1029",
 	},
-	.attach_adapter = adm1029_attach_adapter,
-	.detach_client = adm1029_detach_client,
+	.probe		= adm1029_probe,
+	.remove		= adm1029_remove,
+	.id_table	= adm1029_id,
+	.detect		= adm1029_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -138,7 +150,6 @@ static struct i2c_driver adm1029_driver = {
  */
 
 struct adm1029_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;		/* zero until following fields are valid */
@@ -284,37 +295,14 @@ static const struct attribute_group adm1029_group = {
  * Real code
  */
 
-static int adm1029_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1029_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, adm1029_detect);
-}
+	struct i2c_adapter *adapter = client->adapter;
 
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-
-static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *client;
-	struct adm1029_data *data;
-	int err = 0;
-	const char *name = "";
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &adm1029_driver;
+		return -ENODEV;
 
 	/* Now we do the detection and identification. A negative kind
 	 * means that the driver was loaded with no force parameter
@@ -362,32 +350,41 @@ static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind)
 		if (kind <= 0) {	/* identification failed */
 			pr_debug("adm1029: Unsupported chip (man_id=0x%02X, "
 				 "chip_id=0x%02X)\n", man_id, chip_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
+	strlcpy(info->type, "adm1029", I2C_NAME_SIZE);
 
-	if (kind == adm1029) {
-		name = "adm1029";
+	return 0;
+}
+
+static int adm1029_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adm1029_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
 	}
 
-	/* We can fill in the remaining client fields */
-	strlcpy(client->name, name, I2C_NAME_SIZE);
+	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
-
 	/*
 	 * Initialize the ADM1029 chip
 	 * Check config register
 	 */
-	if (adm1029_init_client(client) == 0)
-		goto exit_detach;
+	if (adm1029_init_client(client) == 0) {
+		err = -ENODEV;
+		goto exit_free;
+	}
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -399,8 +396,6 @@ static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind)
 
  exit_remove_files:
 	sysfs_remove_group(&client->dev.kobj, &adm1029_group);
- exit_detach:
-	i2c_detach_client(client);
  exit_free:
 	kfree(data);
  exit:
@@ -424,17 +419,13 @@ static int adm1029_init_client(struct i2c_client *client)
 	return 1;
 }
 
-static int adm1029_detach_client(struct i2c_client *client)
+static int adm1029_remove(struct i2c_client *client)
 {
 	struct adm1029_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1029_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 2bffcab7dc9..789441830cd 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -70,7 +70,6 @@ typedef u8 auto_chan_table_t[8][2];
 
 /* Each client has this additional data */
 struct adm1031_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	int chip_type;
@@ -99,19 +98,32 @@ struct adm1031_data {
 	s8 temp_crit[3];
 };
 
-static int adm1031_attach_adapter(struct i2c_adapter *adapter);
-static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm1031_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int adm1031_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
 static void adm1031_init_client(struct i2c_client *client);
-static int adm1031_detach_client(struct i2c_client *client);
+static int adm1031_remove(struct i2c_client *client);
 static struct adm1031_data *adm1031_update_device(struct device *dev);
 
+static const struct i2c_device_id adm1031_id[] = {
+	{ "adm1030", adm1030 },
+	{ "adm1031", adm1031 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1031_id);
+
 /* This is the driver that will be inserted */
 static struct i2c_driver adm1031_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name = "adm1031",
 	},
-	.attach_adapter = adm1031_attach_adapter,
-	.detach_client = adm1031_detach_client,
+	.probe		= adm1031_probe,
+	.remove		= adm1031_remove,
+	.id_table	= adm1031_id,
+	.detect		= adm1031_detect,
+	.address_data	= &addr_data,
 };
 
 static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg)
@@ -693,13 +705,6 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12);
 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
 
-static int adm1031_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, adm1031_detect);
-}
-
 static struct attribute *adm1031_attributes[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_div.dev_attr.attr,
@@ -770,27 +775,15 @@ static const struct attribute_group adm1031_group_opt = {
 	.attrs = adm1031_attributes_opt,
 };
 
-/* This function is called by i2c_probe */
-static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1031_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct adm1031_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
 	const char *name = "";
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &adm1031_driver;
+		return -ENODEV;
 
 	if (kind < 0) {
 		int id, co;
@@ -798,7 +791,7 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
 		co = i2c_smbus_read_byte_data(client, 0x3e);
 
 		if (!((id == 0x31 || id == 0x30) && co == 0x41))
-			goto exit_free;
+			return -ENODEV;
 		kind = (id == 0x30) ? adm1030 : adm1031;
 	}
 
@@ -809,28 +802,43 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
 	 * auto fan control helper table. */
 	if (kind == adm1030) {
 		name = "adm1030";
-		data->chan_select_table = &auto_channel_select_table_adm1030;
 	} else if (kind == adm1031) {
 		name = "adm1031";
-		data->chan_select_table = &auto_channel_select_table_adm1031;
 	}
-	data->chip_type = kind;
+	strlcpy(info->type, name, I2C_NAME_SIZE);
 
-	strlcpy(client->name, name, I2C_NAME_SIZE);
+	return 0;
+}
+
+static int adm1031_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adm1031_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	data->chip_type = id->driver_data;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
+	if (data->chip_type == adm1030)
+		data->chan_select_table = &auto_channel_select_table_adm1030;
+	else
+		data->chan_select_table = &auto_channel_select_table_adm1031;
 
 	/* Initialize the ADM1031 chip */
 	adm1031_init_client(client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &adm1031_group)))
-		goto exit_detach;
+		goto exit_free;
 
-	if (kind == adm1031) {
+	if (data->chip_type == adm1031) {
 		if ((err = sysfs_create_group(&client->dev.kobj,
 						&adm1031_group_opt)))
 			goto exit_remove;
@@ -847,25 +855,19 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &adm1031_group);
 	sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int adm1031_detach_client(struct i2c_client *client)
+static int adm1031_remove(struct i2c_client *client)
 {
 	struct adm1031_data *data = i2c_get_clientdata(client);
-	int ret;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1031_group);
 	sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
-	if ((ret = i2c_detach_client(client)) != 0) {
-		return ret;
-	}
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 149ef25252e..2444b15f2e9 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -130,25 +130,37 @@ static inline unsigned int AOUT_FROM_REG(u8 reg)
 	return SCALE(reg, 1250, 255);
 }
 
-static int adm9240_attach_adapter(struct i2c_adapter *adapter);
-static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adm9240_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int adm9240_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
 static void adm9240_init_client(struct i2c_client *client);
-static int adm9240_detach_client(struct i2c_client *client);
+static int adm9240_remove(struct i2c_client *client);
 static struct adm9240_data *adm9240_update_device(struct device *dev);
 
 /* driver data */
+static const struct i2c_device_id adm9240_id[] = {
+	{ "adm9240", adm9240 },
+	{ "ds1780", ds1780 },
+	{ "lm81", lm81 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm9240_id);
+
 static struct i2c_driver adm9240_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adm9240",
 	},
-	.attach_adapter	= adm9240_attach_adapter,
-	.detach_client	= adm9240_detach_client,
+	.probe		= adm9240_probe,
+	.remove		= adm9240_remove,
+	.id_table	= adm9240_id,
+	.detect		= adm9240_detect,
+	.address_data	= &addr_data,
 };
 
 /* per client data */
 struct adm9240_data {
-	enum chips type;
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;
@@ -532,28 +544,17 @@ static const struct attribute_group adm9240_group = {
 
 /*** sensor chip detect and driver install ***/
 
-static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm9240_detect(struct i2c_client *new_client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct adm9240_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = new_client->adapter;
 	const char *name = "";
+	int address = new_client->addr;
 	u8 man_id, die_rev;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &adm9240_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	if (kind == 0) {
 		kind = adm9240;
@@ -566,7 +567,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
 				!= address) {
 			dev_err(&adapter->dev, "detect fail: address match, "
 					"0x%02x\n", address);
-			goto exit_free;
+			return -ENODEV;
 		}
 
 		/* check known chip manufacturer */
@@ -581,7 +582,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
 		} else {
 			dev_err(&adapter->dev, "detect fail: unknown manuf, "
 					"0x%02x\n", man_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 
 		/* successful detect, print chip info */
@@ -600,20 +601,31 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
 	} else if (kind == lm81) {
 		name = "lm81";
 	}
+	strlcpy(info->type, name, I2C_NAME_SIZE);
 
-	/* fill in the remaining client fields and attach */
-	strlcpy(new_client->name, name, I2C_NAME_SIZE);
-	data->type = kind;
-	mutex_init(&data->update_lock);
+	return 0;
+}
 
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
+static int adm9240_probe(struct i2c_client *new_client,
+			 const struct i2c_device_id *id)
+{
+	struct adm9240_data *data;
+	int err;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
+	mutex_init(&data->update_lock);
 
 	adm9240_init_client(new_client);
 
 	/* populate sysfs filesystem */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&new_client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -625,32 +637,19 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove:
 	sysfs_remove_group(&new_client->dev.kobj, &adm9240_group);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int adm9240_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, adm9240_detect);
-}
-
-static int adm9240_detach_client(struct i2c_client *client)
+static int adm9240_remove(struct i2c_client *client)
 {
 	struct adm9240_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm9240_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 5c8b6e0ff47..5c39b4af1b2 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -64,7 +64,6 @@ static unsigned int ads7828_lsb_resol; /* resolution of the ADC sample lsb */
 
 /* Each client has this additional data */
 struct ads7828_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock; /* mutex protect updates */
 	char valid; /* !=0 if following fields are valid */
@@ -73,7 +72,10 @@ struct ads7828_data {
 };
 
 /* Function declaration - necessary due to function dependencies */
-static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind);
+static int ads7828_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
+static int ads7828_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
 
 /* The ADS7828 returns the 12-bit sample in two bytes,
 	these are read as a word then byte-swapped */
@@ -156,58 +158,43 @@ static const struct attribute_group ads7828_group = {
 	.attrs = ads7828_attributes,
 };
 
-static int ads7828_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, ads7828_detect);
-}
-
-static int ads7828_detach_client(struct i2c_client *client)
+static int ads7828_remove(struct i2c_client *client)
 {
 	struct ads7828_data *data = i2c_get_clientdata(client);
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &ads7828_group);
-	i2c_detach_client(client);
 	kfree(i2c_get_clientdata(client));
 	return 0;
 }
 
+static const struct i2c_device_id ads7828_id[] = {
+	{ "ads7828", ads7828 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ads7828_id);
+
 /* This is the driver that will be inserted */
 static struct i2c_driver ads7828_driver = {
+	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "ads7828",
 	},
-	.attach_adapter = ads7828_attach_adapter,
-	.detach_client = ads7828_detach_client,
+	.probe = ads7828_probe,
+	.remove = ads7828_remove,
+	.id_table = ads7828_id,
+	.detect = ads7828_detect,
+	.address_data = &addr_data,
 };
 
-/* This function is called by i2c_probe */
-static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int ads7828_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct ads7828_data *data;
-	int err = 0;
-	const char *name = "";
+	struct i2c_adapter *adapter = client->adapter;
 
 	/* Check we have a valid client */
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	client structure, even though we cannot fill it completely yet.
-	But it allows us to access ads7828_read_value. */
-	data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &ads7828_driver;
+		return -ENODEV;
 
 	/* Now, we do the remaining detection. There is no identification
 	dedicated register so attempt to sanity check using knowledge of
@@ -225,32 +212,34 @@ static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind)
 				printk(KERN_DEBUG
 				"%s : Doesn't look like an ads7828 device\n",
 				__func__);
-				goto exit_free;
+				return -ENODEV;
 			}
 		}
 	}
+	strlcpy(info->type, "ads7828", I2C_NAME_SIZE);
 
-	/* Determine the chip type - only one kind supported! */
-	if (kind <= 0)
-		kind = ads7828;
+	return 0;
+}
 
-	if (kind == ads7828)
-		name = "ads7828";
+static int ads7828_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct ads7828_data *data;
+	int err;
 
-	/* Fill in the remaining client fields, put it into the global list */
-	strlcpy(client->name, name, I2C_NAME_SIZE);
+	data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
 
+	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	err = i2c_attach_client(client);
-	if (err)
-		goto exit_free;
-
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &ads7828_group);
 	if (err)
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -262,8 +251,6 @@ static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &ads7828_group);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 6b5325f33a2..d368d8f845e 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -138,7 +138,6 @@ I2C_CLIENT_INSMOD_1(adt7470);
 #define FAN_DATA_VALID(x)	((x) && (x) != FAN_PERIOD_INVALID)
 
 struct adt7470_data {
-	struct i2c_client	client;
 	struct device		*hwmon_dev;
 	struct attribute_group	attrs;
 	struct mutex		lock;
@@ -164,16 +163,28 @@ struct adt7470_data {
 	u8			pwm_auto_temp[ADT7470_PWM_COUNT];
 };
 
-static int adt7470_attach_adapter(struct i2c_adapter *adapter);
-static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind);
-static int adt7470_detach_client(struct i2c_client *client);
+static int adt7470_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int adt7470_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
+static int adt7470_remove(struct i2c_client *client);
+
+static const struct i2c_device_id adt7470_id[] = {
+	{ "adt7470", adt7470 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adt7470_id);
 
 static struct i2c_driver adt7470_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adt7470",
 	},
-	.attach_adapter	= adt7470_attach_adapter,
-	.detach_client	= adt7470_detach_client,
+	.probe		= adt7470_probe,
+	.remove		= adt7470_remove,
+	.id_table	= adt7470_id,
+	.detect		= adt7470_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -1004,64 +1015,52 @@ static struct attribute *adt7470_attr[] =
 	NULL
 };
 
-static int adt7470_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, adt7470_detect);
-}
-
-static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adt7470_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct adt7470_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &adt7470_driver;
-
-	i2c_set_clientdata(client, data);
-
-	mutex_init(&data->lock);
+		return -ENODEV;
 
 	if (kind <= 0) {
 		int vendor, device, revision;
 
 		vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
-		if (vendor != ADT7470_VENDOR) {
-			err = -ENODEV;
-			goto exit_free;
-		}
+		if (vendor != ADT7470_VENDOR)
+			return -ENODEV;
 
 		device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
-		if (device != ADT7470_DEVICE) {
-			err = -ENODEV;
-			goto exit_free;
-		}
+		if (device != ADT7470_DEVICE)
+			return -ENODEV;
 
 		revision = i2c_smbus_read_byte_data(client,
 						    ADT7470_REG_REVISION);
-		if (revision != ADT7470_REVISION) {
-			err = -ENODEV;
-			goto exit_free;
-		}
+		if (revision != ADT7470_REVISION)
+			return -ENODEV;
 	} else
 		dev_dbg(&adapter->dev, "detection forced\n");
 
-	strlcpy(client->name, "adt7470", I2C_NAME_SIZE);
+	strlcpy(info->type, "adt7470", I2C_NAME_SIZE);
 
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
+	return 0;
+}
+
+static int adt7470_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adt7470_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->lock);
 
 	dev_info(&client->dev, "%s chip found\n", client->name);
 
@@ -1071,7 +1070,7 @@ static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind)
 	/* Register sysfs hooks */
 	data->attrs.attrs = adt7470_attr;
 	if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -1083,21 +1082,18 @@ static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int adt7470_detach_client(struct i2c_client *client)
+static int adt7470_remove(struct i2c_client *client)
 {
 	struct adt7470_data *data = i2c_get_clientdata(client);
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &data->attrs);
-	i2c_detach_client(client);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 93dbf5e7ff8..ce4a7cb5a11 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -143,7 +143,6 @@ I2C_CLIENT_INSMOD_1(adt7473);
 #define FAN_DATA_VALID(x)	((x) && (x) != FAN_PERIOD_INVALID)
 
 struct adt7473_data {
-	struct i2c_client	client;
 	struct device		*hwmon_dev;
 	struct attribute_group	attrs;
 	struct mutex		lock;
@@ -178,16 +177,28 @@ struct adt7473_data {
 	u8			max_duty_at_overheat;
 };
 
-static int adt7473_attach_adapter(struct i2c_adapter *adapter);
-static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind);
-static int adt7473_detach_client(struct i2c_client *client);
+static int adt7473_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int adt7473_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
+static int adt7473_remove(struct i2c_client *client);
+
+static const struct i2c_device_id adt7473_id[] = {
+	{ "adt7473", adt7473 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adt7473_id);
 
 static struct i2c_driver adt7473_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adt7473",
 	},
-	.attach_adapter	= adt7473_attach_adapter,
-	.detach_client	= adt7473_detach_client,
+	.probe		= adt7473_probe,
+	.remove		= adt7473_remove,
+	.id_table	= adt7473_id,
+	.detect		= adt7473_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -1042,66 +1053,52 @@ static struct attribute *adt7473_attr[] =
 	NULL
 };
 
-static int adt7473_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adt7473_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, adt7473_detect);
-}
-
-static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *client;
-	struct adt7473_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &adt7473_driver;
-
-	i2c_set_clientdata(client, data);
-
-	mutex_init(&data->lock);
+		return -ENODEV;
 
 	if (kind <= 0) {
 		int vendor, device, revision;
 
 		vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
-		if (vendor != ADT7473_VENDOR) {
-			err = -ENODEV;
-			goto exit_free;
-		}
+		if (vendor != ADT7473_VENDOR)
+			return -ENODEV;
 
 		device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
-		if (device != ADT7473_DEVICE) {
-			err = -ENODEV;
-			goto exit_free;
-		}
+		if (device != ADT7473_DEVICE)
+			return -ENODEV;
 
 		revision = i2c_smbus_read_byte_data(client,
 						    ADT7473_REG_REVISION);
-		if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) {
-			err = -ENODEV;
-			goto exit_free;
-		}
+		if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
+			return -ENODEV;
 	} else
 		dev_dbg(&adapter->dev, "detection forced\n");
 
-	strlcpy(client->name, "adt7473", I2C_NAME_SIZE);
+	strlcpy(info->type, "adt7473", I2C_NAME_SIZE);
 
-	err = i2c_attach_client(client);
-	if (err)
-		goto exit_free;
+	return 0;
+}
+
+static int adt7473_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adt7473_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->lock);
 
 	dev_info(&client->dev, "%s chip found\n", client->name);
 
@@ -1112,7 +1109,7 @@ static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind)
 	data->attrs.attrs = adt7473_attr;
 	err = sysfs_create_group(&client->dev.kobj, &data->attrs);
 	if (err)
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -1124,21 +1121,18 @@ static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int adt7473_detach_client(struct i2c_client *client)
+static int adt7473_remove(struct i2c_client *client)
 {
 	struct adt7473_data *data = i2c_get_clientdata(client);
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &data->attrs);
-	i2c_detach_client(client);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index fe2eea4d799..8a45a2e6ba8 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -176,10 +176,8 @@ static u8 DIV_TO_REG(long val)
    data is pointed to by client->data. The structure itself is
    dynamically allocated, at the same time the client itself is allocated. */
 struct asb100_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex lock;
-	enum chips type;
 
 	struct mutex update_lock;
 	unsigned long last_updated;	/* In jiffies */
@@ -206,18 +204,30 @@ struct asb100_data {
 static int asb100_read_value(struct i2c_client *client, u16 reg);
 static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val);
 
-static int asb100_attach_adapter(struct i2c_adapter *adapter);
-static int asb100_detect(struct i2c_adapter *adapter, int address, int kind);
-static int asb100_detach_client(struct i2c_client *client);
+static int asb100_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int asb100_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int asb100_remove(struct i2c_client *client);
 static struct asb100_data *asb100_update_device(struct device *dev);
 static void asb100_init_client(struct i2c_client *client);
 
+static const struct i2c_device_id asb100_id[] = {
+	{ "asb100", asb100 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, asb100_id);
+
 static struct i2c_driver asb100_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "asb100",
 	},
-	.attach_adapter	= asb100_attach_adapter,
-	.detach_client	= asb100_detach_client,
+	.probe		= asb100_probe,
+	.remove		= asb100_remove,
+	.id_table	= asb100_id,
+	.detect		= asb100_detect,
+	.address_data	= &addr_data,
 };
 
 /* 7 Voltages */
@@ -619,35 +629,13 @@ static const struct attribute_group asb100_group = {
 	.attrs = asb100_attributes,
 };
 
-/* This function is called when:
-	asb100_driver is inserted (when this module is loaded), for each
-		available adapter
-	when a new adapter is inserted (and asb100_driver is still present)
- */
-static int asb100_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, asb100_detect);
-}
-
-static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
-		int kind, struct i2c_client *client)
+static int asb100_detect_subclients(struct i2c_client *client)
 {
 	int i, id, err;
+	int address = client->addr;
+	unsigned short sc_addr[2];
 	struct asb100_data *data = i2c_get_clientdata(client);
-
-	data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (!(data->lm75[0])) {
-		err = -ENOMEM;
-		goto ERROR_SC_0;
-	}
-
-	data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (!(data->lm75[1])) {
-		err = -ENOMEM;
-		goto ERROR_SC_1;
-	}
+	struct i2c_adapter *adapter = client->adapter;
 
 	id = i2c_adapter_id(adapter);
 
@@ -665,37 +653,34 @@ static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
 		asb100_write_value(client, ASB100_REG_I2C_SUBADDR,
 					(force_subclients[2] & 0x07) |
 					((force_subclients[3] & 0x07) << 4));
-		data->lm75[0]->addr = force_subclients[2];
-		data->lm75[1]->addr = force_subclients[3];
+		sc_addr[0] = force_subclients[2];
+		sc_addr[1] = force_subclients[3];
 	} else {
 		int val = asb100_read_value(client, ASB100_REG_I2C_SUBADDR);
-		data->lm75[0]->addr = 0x48 + (val & 0x07);
-		data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07);
+		sc_addr[0] = 0x48 + (val & 0x07);
+		sc_addr[1] = 0x48 + ((val >> 4) & 0x07);
 	}
 
-	if (data->lm75[0]->addr == data->lm75[1]->addr) {
+	if (sc_addr[0] == sc_addr[1]) {
 		dev_err(&client->dev, "duplicate addresses 0x%x "
-				"for subclients\n", data->lm75[0]->addr);
+				"for subclients\n", sc_addr[0]);
 		err = -ENODEV;
 		goto ERROR_SC_2;
 	}
 
-	for (i = 0; i <= 1; i++) {
-		i2c_set_clientdata(data->lm75[i], NULL);
-		data->lm75[i]->adapter = adapter;
-		data->lm75[i]->driver = &asb100_driver;
-		strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE);
-	}
-
-	if ((err = i2c_attach_client(data->lm75[0]))) {
+	data->lm75[0] = i2c_new_dummy(adapter, sc_addr[0]);
+	if (!data->lm75[0]) {
 		dev_err(&client->dev, "subclient %d registration "
-			"at address 0x%x failed.\n", i, data->lm75[0]->addr);
+			"at address 0x%x failed.\n", 1, sc_addr[0]);
+		err = -ENOMEM;
 		goto ERROR_SC_2;
 	}
 
-	if ((err = i2c_attach_client(data->lm75[1]))) {
+	data->lm75[1] = i2c_new_dummy(adapter, sc_addr[1]);
+	if (!data->lm75[1]) {
 		dev_err(&client->dev, "subclient %d registration "
-			"at address 0x%x failed.\n", i, data->lm75[1]->addr);
+			"at address 0x%x failed.\n", 2, sc_addr[1]);
+		err = -ENOMEM;
 		goto ERROR_SC_3;
 	}
 
@@ -703,55 +688,31 @@ static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
 
 /* Undo inits in case of errors */
 ERROR_SC_3:
-	i2c_detach_client(data->lm75[0]);
+	i2c_unregister_device(data->lm75[0]);
 ERROR_SC_2:
-	kfree(data->lm75[1]);
-ERROR_SC_1:
-	kfree(data->lm75[0]);
-ERROR_SC_0:
 	return err;
 }
 
-static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int asb100_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
 {
-	int err;
-	struct i2c_client *client;
-	struct asb100_data *data;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		pr_debug("asb100.o: detect failed, "
 				"smbus byte data not supported!\n");
-		err = -ENODEV;
-		goto ERROR0;
+		return -ENODEV;
 	}
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access asb100_{read,write}_value. */
-
-	if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
-		pr_debug("asb100.o: detect failed, kzalloc failed!\n");
-		err = -ENOMEM;
-		goto ERROR0;
-	}
-
-	client = &data->client;
-	mutex_init(&data->lock);
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &asb100_driver;
-
-	/* Now, we do the remaining detection. */
-
 	/* The chip may be stuck in some other bank than bank 0. This may
 	   make reading other information impossible. Specify a force=... or
 	   force_*=... parameter, and the chip will be reset to the right
 	   bank. */
 	if (kind < 0) {
 
-		int val1 = asb100_read_value(client, ASB100_REG_BANK);
-		int val2 = asb100_read_value(client, ASB100_REG_CHIPMAN);
+		int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
+		int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
 
 		/* If we're in bank 0 */
 		if ((!(val1 & 0x07)) &&
@@ -761,48 +722,60 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
 				((val1 & 0x80) && (val2 != 0x06)))) {
 			pr_debug("asb100.o: detect failed, "
 					"bad chip id 0x%02x!\n", val2);
-			err = -ENODEV;
-			goto ERROR1;
+			return -ENODEV;
 		}
 
 	} /* kind < 0 */
 
 	/* We have either had a force parameter, or we have already detected
 	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
-	asb100_write_value(client, ASB100_REG_BANK,
-		(asb100_read_value(client, ASB100_REG_BANK) & 0x78) | 0x80);
+	i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
+		(i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
+		| 0x80);
 
 	/* Determine the chip type. */
 	if (kind <= 0) {
-		int val1 = asb100_read_value(client, ASB100_REG_WCHIPID);
-		int val2 = asb100_read_value(client, ASB100_REG_CHIPMAN);
+		int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
+		int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
 
 		if ((val1 == 0x31) && (val2 == 0x06))
 			kind = asb100;
 		else {
 			if (kind == 0)
-				dev_warn(&client->dev, "ignoring "
+				dev_warn(&adapter->dev, "ignoring "
 					"'force' parameter for unknown chip "
 					"at adapter %d, address 0x%02x.\n",
-					i2c_adapter_id(adapter), address);
-			err = -ENODEV;
-			goto ERROR1;
+					i2c_adapter_id(adapter), client->addr);
+			return -ENODEV;
 		}
 	}
 
-	/* Fill in remaining client fields and put it into the global list */
-	strlcpy(client->name, "asb100", I2C_NAME_SIZE);
-	data->type = kind;
-	mutex_init(&data->update_lock);
+	strlcpy(info->type, "asb100", I2C_NAME_SIZE);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto ERROR1;
+	return 0;
+}
+
+static int asb100_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int err;
+	struct asb100_data *data;
+
+	data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL);
+	if (!data) {
+		pr_debug("asb100.o: probe failed, kzalloc failed!\n");
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->lock);
+	mutex_init(&data->update_lock);
 
 	/* Attach secondary lm75 clients */
-	if ((err = asb100_detect_subclients(adapter, address, kind,
-			client)))
-		goto ERROR2;
+	err = asb100_detect_subclients(client);
+	if (err)
+		goto ERROR1;
 
 	/* Initialize the chip */
 	asb100_init_client(client);
@@ -827,39 +800,25 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
 ERROR4:
 	sysfs_remove_group(&client->dev.kobj, &asb100_group);
 ERROR3:
-	i2c_detach_client(data->lm75[1]);
-	i2c_detach_client(data->lm75[0]);
-	kfree(data->lm75[1]);
-	kfree(data->lm75[0]);
-ERROR2:
-	i2c_detach_client(client);
+	i2c_unregister_device(data->lm75[1]);
+	i2c_unregister_device(data->lm75[0]);
 ERROR1:
 	kfree(data);
 ERROR0:
 	return err;
 }
 
-static int asb100_detach_client(struct i2c_client *client)
+static int asb100_remove(struct i2c_client *client)
 {
 	struct asb100_data *data = i2c_get_clientdata(client);
-	int err;
-
-	/* main client */
-	if (data) {
-		hwmon_device_unregister(data->hwmon_dev);
-		sysfs_remove_group(&client->dev.kobj, &asb100_group);
-	}
 
-	if ((err = i2c_detach_client(client)))
-		return err;
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &asb100_group);
 
-	/* main client */
-	if (data)
-		kfree(data);
+	i2c_unregister_device(data->lm75[1]);
+	i2c_unregister_device(data->lm75[0]);
 
-	/* subclient */
-	else
-		kfree(client);
+	kfree(data);
 
 	return 0;
 }
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index 01c17e387f0..d191118ba0c 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -46,21 +46,32 @@ static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
 
 I2C_CLIENT_INSMOD_1(atxp1);
 
-static int atxp1_attach_adapter(struct i2c_adapter * adapter);
-static int atxp1_detach_client(struct i2c_client * client);
+static int atxp1_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id);
+static int atxp1_remove(struct i2c_client *client);
 static struct atxp1_data * atxp1_update_device(struct device *dev);
-static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind);
+static int atxp1_detect(struct i2c_client *client, int kind,
+			struct i2c_board_info *info);
+
+static const struct i2c_device_id atxp1_id[] = {
+	{ "atxp1", atxp1 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, atxp1_id);
 
 static struct i2c_driver atxp1_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "atxp1",
 	},
-	.attach_adapter = atxp1_attach_adapter,
-	.detach_client	= atxp1_detach_client,
+	.probe		= atxp1_probe,
+	.remove		= atxp1_remove,
+	.id_table	= atxp1_id,
+	.detect		= atxp1_detect,
+	.address_data	= &addr_data,
 };
 
 struct atxp1_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	unsigned long last_updated;
@@ -263,35 +274,16 @@ static const struct attribute_group atxp1_group = {
 };
 
 
-static int atxp1_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int atxp1_detect(struct i2c_client *new_client, int kind,
+			struct i2c_board_info *info)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, &atxp1_detect);
-};
+	struct i2c_adapter *adapter = new_client->adapter;
 
-static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client * new_client;
-	struct atxp1_data * data;
-	int err = 0;
 	u8 temp;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &atxp1_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/* Detect ATXP1, checking if vendor ID registers are all zero */
 	if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
@@ -305,35 +297,46 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
 
 		if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
 			 (i2c_smbus_read_byte_data(new_client, 0x11) == temp) ))
-			goto exit_free;
+			return -ENODEV;
 	}
 
 	/* Get VRM */
-	data->vrm = vid_which_vrm();
+	temp = vid_which_vrm();
 
-	if ((data->vrm != 90) && (data->vrm != 91)) {
-		dev_err(&new_client->dev, "Not supporting VRM %d.%d\n",
-				data->vrm / 10, data->vrm % 10);
-		goto exit_free;
+	if ((temp != 90) && (temp != 91)) {
+		dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n",
+				temp / 10, temp % 10);
+		return -ENODEV;
 	}
 
-	strncpy(new_client->name, "atxp1", I2C_NAME_SIZE);
-
-	data->valid = 0;
+	strlcpy(info->type, "atxp1", I2C_NAME_SIZE);
 
-	mutex_init(&data->update_lock);
+	return 0;
+}
 
-	err = i2c_attach_client(new_client);
+static int atxp1_probe(struct i2c_client *new_client,
+		       const struct i2c_device_id *id)
+{
+	struct atxp1_data *data;
+	int err;
 
-	if (err)
-	{
-		dev_err(&new_client->dev, "Attach client error.\n");
-		goto exit_free;
+	data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
 	}
 
+	/* Get VRM */
+	data->vrm = vid_which_vrm();
+
+	i2c_set_clientdata(new_client, data);
+	data->valid = 0;
+
+	mutex_init(&data->update_lock);
+
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &atxp1_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&new_client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -348,30 +351,22 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove_files:
 	sysfs_remove_group(&new_client->dev.kobj, &atxp1_group);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 };
 
-static int atxp1_detach_client(struct i2c_client * client)
+static int atxp1_remove(struct i2c_client *client)
 {
 	struct atxp1_data * data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &atxp1_group);
 
-	err = i2c_detach_client(client);
-
-	if (err)
-		dev_err(&client->dev, "Failed to detach client.\n");
-	else
-		kfree(data);
+	kfree(data);
 
-	return err;
+	return 0;
 };
 
 static int __init atxp1_init(void)
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 5f300ffed65..7415381601c 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -72,7 +72,6 @@ static const u8 DS1621_REG_TEMP[3] = {
 
 /* Each client has this additional data */
 struct ds1621_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;			/* !=0 if following fields are valid */
@@ -82,20 +81,32 @@ struct ds1621_data {
 	u8 conf;			/* Register encoding, combined */
 };
 
-static int ds1621_attach_adapter(struct i2c_adapter *adapter);
-static int ds1621_detect(struct i2c_adapter *adapter, int address,
-			 int kind);
+static int ds1621_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int ds1621_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
 static void ds1621_init_client(struct i2c_client *client);
-static int ds1621_detach_client(struct i2c_client *client);
+static int ds1621_remove(struct i2c_client *client);
 static struct ds1621_data *ds1621_update_client(struct device *dev);
 
+static const struct i2c_device_id ds1621_id[] = {
+	{ "ds1621", ds1621 },
+	{ "ds1625", ds1621 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds1621_id);
+
 /* This is the driver that will be inserted */
 static struct i2c_driver ds1621_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ds1621",
 	},
-	.attach_adapter	= ds1621_attach_adapter,
-	.detach_client	= ds1621_detach_client,
+	.probe		= ds1621_probe,
+	.remove		= ds1621_remove,
+	.id_table	= ds1621_id,
+	.detect		= ds1621_detect,
+	.address_data	= &addr_data,
 };
 
 /* All registers are word-sized, except for the configuration register.
@@ -199,40 +210,18 @@ static const struct attribute_group ds1621_group = {
 };
 
 
-static int ds1621_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, ds1621_detect);
-}
-
-/* This function is called by i2c_probe */
-static int ds1621_detect(struct i2c_adapter *adapter, int address,
-			 int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int ds1621_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	int conf, temp;
-	struct i2c_client *client;
-	struct ds1621_data *data;
-	int i, err = 0;
+	int i;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA 
 				     | I2C_FUNC_SMBUS_WORD_DATA 
 				     | I2C_FUNC_SMBUS_WRITE_BYTE))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access ds1621_{read,write}_value. */
-	if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-	
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &ds1621_driver;
+		return -ENODEV;
 
 	/* Now, we do the remaining detection. It is lousy. */
 	if (kind < 0) {
@@ -241,29 +230,41 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
 		   improbable in our case. */
 		conf = ds1621_read_value(client, DS1621_REG_CONF);
 		if (conf & DS1621_REG_CONFIG_NVB)
-			goto exit_free;
+			return -ENODEV;
 		/* The 7 lowest bits of a temperature should always be 0. */
-		for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+		for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
 			temp = ds1621_read_value(client, DS1621_REG_TEMP[i]);
 			if (temp & 0x007f)
-				goto exit_free;
+				return -ENODEV;
 		}
 	}
 
-	/* Fill in remaining client fields and put it into the global list */
-	strlcpy(client->name, "ds1621", I2C_NAME_SIZE);
-	mutex_init(&data->update_lock);
+	strlcpy(info->type, "ds1621", I2C_NAME_SIZE);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
+	return 0;
+}
+
+static int ds1621_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ds1621_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
 
 	/* Initialize the DS1621 chip */
 	ds1621_init_client(client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -275,25 +276,19 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
 
       exit_remove_files:
 	sysfs_remove_group(&client->dev.kobj, &ds1621_group);
-      exit_detach:
-	i2c_detach_client(client);
       exit_free:
 	kfree(data);
       exit:
 	return err;
 }
 
-static int ds1621_detach_client(struct i2c_client *client)
+static int ds1621_remove(struct i2c_client *client)
 {
 	struct ds1621_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &ds1621_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 
 	return 0;
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index dc1f30e432e..1692de36996 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -87,7 +87,6 @@ I2C_CLIENT_INSMOD_2(f75373, f75375);
 
 struct f75375_data {
 	unsigned short addr;
-	struct i2c_client *client;
 	struct device *hwmon_dev;
 
 	const char *name;
@@ -114,21 +113,12 @@ struct f75375_data {
 	s8 temp_max_hyst[2];
 };
 
-static int f75375_attach_adapter(struct i2c_adapter *adapter);
-static int f75375_detect(struct i2c_adapter *adapter, int address, int kind);
-static int f75375_detach_client(struct i2c_client *client);
+static int f75375_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
 static int f75375_probe(struct i2c_client *client,
 			const struct i2c_device_id *id);
 static int f75375_remove(struct i2c_client *client);
 
-static struct i2c_driver f75375_legacy_driver = {
-	.driver = {
-		.name = "f75375_legacy",
-	},
-	.attach_adapter = f75375_attach_adapter,
-	.detach_client = f75375_detach_client,
-};
-
 static const struct i2c_device_id f75375_id[] = {
 	{ "f75373", f75373 },
 	{ "f75375", f75375 },
@@ -137,12 +127,15 @@ static const struct i2c_device_id f75375_id[] = {
 MODULE_DEVICE_TABLE(i2c, f75375_id);
 
 static struct i2c_driver f75375_driver = {
+	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "f75375",
 	},
 	.probe = f75375_probe,
 	.remove = f75375_remove,
 	.id_table = f75375_id,
+	.detect = f75375_detect,
+	.address_data = &addr_data,
 };
 
 static inline int f75375_read8(struct i2c_client *client, u8 reg)
@@ -607,22 +600,6 @@ static const struct attribute_group f75375_group = {
 	.attrs = f75375_attributes,
 };
 
-static int f75375_detach_client(struct i2c_client *client)
-{
-	int err;
-
-	f75375_remove(client);
-	err = i2c_detach_client(client);
-	if (err) {
-		dev_err(&client->dev,
-			"Client deregistration failed, "
-			"client not detached.\n");
-		return err;
-	}
-	kfree(client);
-	return 0;
-}
-
 static void f75375_init(struct i2c_client *client, struct f75375_data *data,
 		struct f75375s_platform_data *f75375s_pdata)
 {
@@ -651,7 +628,6 @@ static int f75375_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	i2c_set_clientdata(client, data);
-	data->client = client;
 	mutex_init(&data->update_lock);
 	data->kind = id->driver_data;
 
@@ -700,29 +676,13 @@ static int f75375_remove(struct i2c_client *client)
 	return 0;
 }
 
-static int f75375_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, f75375_detect);
-}
-
-/* This function is called by i2c_probe */
-static int f75375_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int f75375_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	u8 version = 0;
-	int err = 0;
 	const char *name = "";
-	struct i2c_device_id id;
-
-	if (!(client = kzalloc(sizeof(*client), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &f75375_legacy_driver;
 
 	if (kind < 0) {
 		u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
@@ -736,7 +696,7 @@ static int f75375_detect(struct i2c_adapter *adapter, int address, int kind)
 			dev_err(&adapter->dev,
 				"failed,%02X,%02X,%02X\n",
 				chipid, version, vendid);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
@@ -746,43 +706,18 @@ static int f75375_detect(struct i2c_adapter *adapter, int address, int kind)
 		name = "f75373";
 	}
 	dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
-	strlcpy(client->name, name, I2C_NAME_SIZE);
-
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
-
-	strlcpy(id.name, name, I2C_NAME_SIZE);
-	id.driver_data = kind;
-	if ((err = f75375_probe(client, &id)) < 0)
-		goto exit_detach;
+	strlcpy(info->type, name, I2C_NAME_SIZE);
 
 	return 0;
-
-exit_detach:
-	i2c_detach_client(client);
-exit_free:
-	kfree(client);
-exit:
-	return err;
 }
 
 static int __init sensors_f75375_init(void)
 {
-	int status;
-	status = i2c_add_driver(&f75375_driver);
-	if (status)
-		return status;
-
-	status = i2c_add_driver(&f75375_legacy_driver);
-	if (status)
-		i2c_del_driver(&f75375_driver);
-
-	return status;
+	return i2c_add_driver(&f75375_driver);
 }
 
 static void __exit sensors_f75375_exit(void)
 {
-	i2c_del_driver(&f75375_legacy_driver);
 	i2c_del_driver(&f75375_driver);
 }
 
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index ed26b66e083..12c70e402cb 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -106,9 +106,11 @@ I2C_CLIENT_INSMOD_1(fscher);
  * Functions declaration
  */
 
-static int fscher_attach_adapter(struct i2c_adapter *adapter);
-static int fscher_detect(struct i2c_adapter *adapter, int address, int kind);
-static int fscher_detach_client(struct i2c_client *client);
+static int fscher_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int fscher_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int fscher_remove(struct i2c_client *client);
 static struct fscher_data *fscher_update_device(struct device *dev);
 static void fscher_init_client(struct i2c_client *client);
 
@@ -119,12 +121,21 @@ static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value);
  * Driver data (common to all clients)
  */
  
+static const struct i2c_device_id fscher_id[] = {
+	{ "fscher", fscher },
+	{ }
+};
+
 static struct i2c_driver fscher_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "fscher",
 	},
-	.attach_adapter	= fscher_attach_adapter,
-	.detach_client	= fscher_detach_client,
+	.probe		= fscher_probe,
+	.remove		= fscher_remove,
+	.id_table	= fscher_id,
+	.detect		= fscher_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -132,7 +143,6 @@ static struct i2c_driver fscher_driver = {
  */
 
 struct fscher_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -283,38 +293,14 @@ static const struct attribute_group fscher_group = {
  * Real code
  */
 
-static int fscher_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, fscher_detect);
-}
-
-static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int fscher_detect(struct i2c_client *new_client, int kind,
+			 struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct fscher_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = new_client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	 * client structure, even though we cannot fill it completely yet.
-	 * But it allows us to access i2c_smbus_read_byte_data. */
-	if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-  	}
-
-	/* The common I2C client data is placed right before the
-	 * Hermes-specific data. */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &fscher_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/* Do the remaining detection unless force or force_fscher parameter */
 	if (kind < 0) {
@@ -324,24 +310,35 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
 		     FSCHER_REG_IDENT_1) != 0x45)	/* 'E' */
 		 || (i2c_smbus_read_byte_data(new_client,
 		     FSCHER_REG_IDENT_2) != 0x52))	/* 'R' */
-			goto exit_free;
+			return -ENODEV;
+	}
+
+	strlcpy(info->type, "fscher", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int fscher_probe(struct i2c_client *new_client,
+			const struct i2c_device_id *id)
+{
+	struct fscher_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
 	}
 
-	/* Fill in the remaining client fields and put it into the
-	 * global list */
-	strlcpy(new_client->name, "fscher", I2C_NAME_SIZE);
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	fscher_init_client(new_client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&new_client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -353,25 +350,19 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove_files:
 	sysfs_remove_group(&new_client->dev.kobj, &fscher_group);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int fscher_detach_client(struct i2c_client *client)
+static int fscher_remove(struct i2c_client *client)
 {
 	struct fscher_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &fscher_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index bd89d270a5e..96717036893 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -171,20 +171,37 @@ static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 };
  * Functions declarations
  */
 
-static int fschmd_attach_adapter(struct i2c_adapter *adapter);
-static int fschmd_detach_client(struct i2c_client *client);
+static int fschmd_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int fschmd_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int fschmd_remove(struct i2c_client *client);
 static struct fschmd_data *fschmd_update_device(struct device *dev);
 
 /*
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id fschmd_id[] = {
+	{ "fscpos", fscpos },
+	{ "fscher", fscher },
+	{ "fscscy", fscscy },
+	{ "fschrc", fschrc },
+	{ "fschmd", fschmd },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fschmd_id);
+
 static struct i2c_driver fschmd_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= FSCHMD_NAME,
 	},
-	.attach_adapter	= fschmd_attach_adapter,
-	.detach_client	= fschmd_detach_client,
+	.probe		= fschmd_probe,
+	.remove		= fschmd_remove,
+	.id_table	= fschmd_id,
+	.detect		= fschmd_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -192,7 +209,6 @@ static struct i2c_driver fschmd_driver = {
  */
 
 struct fschmd_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	int kind;
@@ -269,7 +285,7 @@ static ssize_t store_temp_max(struct device *dev, struct device_attribute
 	v = SENSORS_LIMIT(v, -128, 127) + 128;
 
 	mutex_lock(&data->update_lock);
-	i2c_smbus_write_byte_data(&data->client,
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
 		FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
 	data->temp_max[index] = v;
 	mutex_unlock(&data->update_lock);
@@ -346,14 +362,14 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute
 
 	mutex_lock(&data->update_lock);
 
-	reg = i2c_smbus_read_byte_data(&data->client,
+	reg = i2c_smbus_read_byte_data(to_i2c_client(dev),
 		FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
 
 	/* bits 2..7 reserved => mask with 0x03 */
 	reg &= ~0x03;
 	reg |= v;
 
-	i2c_smbus_write_byte_data(&data->client,
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
 		FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
 
 	data->fan_ripple[index] = reg;
@@ -416,7 +432,7 @@ static ssize_t store_pwm_auto_point1_pwm(struct device *dev,
 
 	mutex_lock(&data->update_lock);
 
-	i2c_smbus_write_byte_data(&data->client,
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
 		FSCHMD_REG_FAN_MIN[data->kind][index], v);
 	data->fan_min[index] = v;
 
@@ -448,14 +464,14 @@ static ssize_t store_alert_led(struct device *dev,
 
 	mutex_lock(&data->update_lock);
 
-	reg = i2c_smbus_read_byte_data(&data->client, FSCHMD_REG_CONTROL);
+	reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL);
 
 	if (v)
 		reg |= FSCHMD_CONTROL_ALERT_LED_MASK;
 	else
 		reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK;
 
-	i2c_smbus_write_byte_data(&data->client, FSCHMD_REG_CONTROL, reg);
+	i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg);
 
 	data->global_control = reg;
 
@@ -600,32 +616,15 @@ static void fschmd_dmi_decode(const struct dmi_header *header)
 	}
 }
 
-static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind)
+static int fschmd_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct fschmd_data *data;
-	u8 revision;
-	const char * const names[5] = { "Poseidon", "Hermes", "Scylla",
-					"Heracles", "Heimdall" };
+	struct i2c_adapter *adapter = client->adapter;
 	const char * const client_names[5] = { "fscpos", "fscher", "fscscy",
 						"fschrc", "fschmd" };
-	int i, err = 0;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	 * client structure, even though we cannot fill it completely yet.
-	 * But it allows us to access i2c_smbus_read_byte_data. */
-	if (!(data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL)))
-		return -ENOMEM;
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &fschmd_driver;
-	mutex_init(&data->update_lock);
+		return -ENODEV;
 
 	/* Detect & Identify the chip */
 	if (kind <= 0) {
@@ -650,9 +649,31 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind)
 		else if (!strcmp(id, "HMD"))
 			kind = fschmd;
 		else
-			goto exit_free;
+			return -ENODEV;
 	}
 
+	strlcpy(info->type, client_names[kind - 1], I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int fschmd_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct fschmd_data *data;
+	u8 revision;
+	const char * const names[5] = { "Poseidon", "Hermes", "Scylla",
+					"Heracles", "Heimdall" };
+	int i, err;
+	enum chips kind = id->driver_data;
+
+	data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
 	if (kind == fscpos) {
 		/* The Poseidon has hardwired temp limits, fill these
 		   in for the alarm resetting code */
@@ -674,11 +695,6 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* i2c kind goes from 1-5, we want from 0-4 to address arrays */
 	data->kind = kind - 1;
-	strlcpy(client->name, client_names[data->kind], I2C_NAME_SIZE);
-
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
 
 	for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) {
 		err = device_create_file(&client->dev,
@@ -726,25 +742,14 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind)
 	return 0;
 
 exit_detach:
-	fschmd_detach_client(client); /* will also free data for us */
-	return err;
-
-exit_free:
-	kfree(data);
+	fschmd_remove(client); /* will also free data for us */
 	return err;
 }
 
-static int fschmd_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, fschmd_detect);
-}
-
-static int fschmd_detach_client(struct i2c_client *client)
+static int fschmd_remove(struct i2c_client *client)
 {
 	struct fschmd_data *data = i2c_get_clientdata(client);
-	int i, err;
+	int i;
 
 	/* Check if registered in case we're called from fschmd_detect
 	   to cleanup after an error */
@@ -760,9 +765,6 @@ static int fschmd_detach_client(struct i2c_client *client)
 		device_remove_file(&client->dev,
 					&fschmd_fan_attr[i].dev_attr);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 00f48484e54..8a7bcf500b4 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -87,9 +87,11 @@ static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 };
 /*
  * Functions declaration
  */
-static int fscpos_attach_adapter(struct i2c_adapter *adapter);
-static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind);
-static int fscpos_detach_client(struct i2c_client *client);
+static int fscpos_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int fscpos_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int fscpos_remove(struct i2c_client *client);
 
 static int fscpos_read_value(struct i2c_client *client, u8 reg);
 static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value);
@@ -101,19 +103,27 @@ static void reset_fan_alarm(struct i2c_client *client, int nr);
 /*
  * Driver data (common to all clients)
  */
+static const struct i2c_device_id fscpos_id[] = {
+	{ "fscpos", fscpos },
+	{ }
+};
+
 static struct i2c_driver fscpos_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "fscpos",
 	},
-	.attach_adapter	= fscpos_attach_adapter,
-	.detach_client	= fscpos_detach_client,
+	.probe		= fscpos_probe,
+	.remove		= fscpos_remove,
+	.id_table	= fscpos_id,
+	.detect		= fscpos_detect,
+	.address_data	= &addr_data,
 };
 
 /*
  * Client data (each client gets its own)
  */
 struct fscpos_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; 		/* 0 until following fields are valid */
@@ -470,39 +480,14 @@ static const struct attribute_group fscpos_group = {
 	.attrs = fscpos_attributes,
 };
 
-static int fscpos_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, fscpos_detect);
-}
-
-static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int fscpos_detect(struct i2c_client *new_client, int kind,
+			 struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct fscpos_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = new_client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	/*
-	 * OK. For now, we presume we have a valid client. We now create the
-	 * client structure, even though we cannot fill it completely yet.
-	 * But it allows us to access fscpos_{read,write}_value.
-	 */
-
-	if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &fscpos_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/* Do the remaining detection unless force or force_fscpos parameter */
 	if (kind < 0) {
@@ -512,22 +497,30 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
 			!= 0x45) /* 'E' */
 		|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
 			!= 0x47))/* 'G' */
-		{
-			dev_dbg(&new_client->dev, "fscpos detection failed\n");
-			goto exit_free;
-		}
+			return -ENODEV;
 	}
 
-	/* Fill in the remaining client fields and put it in the global list */
-	strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE);
+	strlcpy(info->type, "fscpos", I2C_NAME_SIZE);
 
+	return 0;
+}
+
+static int fscpos_probe(struct i2c_client *new_client,
+			const struct i2c_device_id *id)
+{
+	struct fscpos_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	/* Inizialize the fscpos chip */
 	fscpos_init_client(new_client);
 
@@ -536,7 +529,7 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&new_client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -548,24 +541,19 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove_files:
 	sysfs_remove_group(&new_client->dev.kobj, &fscpos_group);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int fscpos_detach_client(struct i2c_client *client)
+static int fscpos_remove(struct i2c_client *client)
 {
 	struct fscpos_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &fscpos_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 33e9e8a8d1c..7820df45d77 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -114,7 +114,6 @@ static inline u8 FAN_TO_REG(long rpm, int div)
 
 /* Each client has this additional data */
 struct gl518_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	enum chips type;
 
@@ -138,21 +137,33 @@ struct gl518_data {
 	u8 beep_enable;		/* Boolean */
 };
 
-static int gl518_attach_adapter(struct i2c_adapter *adapter);
-static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
+static int gl518_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id);
+static int gl518_detect(struct i2c_client *client, int kind,
+			struct i2c_board_info *info);
 static void gl518_init_client(struct i2c_client *client);
-static int gl518_detach_client(struct i2c_client *client);
+static int gl518_remove(struct i2c_client *client);
 static int gl518_read_value(struct i2c_client *client, u8 reg);
 static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
 static struct gl518_data *gl518_update_device(struct device *dev);
 
+static const struct i2c_device_id gl518_id[] = {
+	{ "gl518sm", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, gl518_id);
+
 /* This is the driver that will be inserted */
 static struct i2c_driver gl518_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "gl518sm",
 	},
-	.attach_adapter	= gl518_attach_adapter,
-	.detach_client	= gl518_detach_client,
+	.probe		= gl518_probe,
+	.remove		= gl518_remove,
+	.id_table	= gl518_id,
+	.detect		= gl518_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -472,46 +483,23 @@ static const struct attribute_group gl518_group_r80 = {
  * Real code
  */
 
-static int gl518_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, gl518_detect);
-}
-
-static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int gl518_detect(struct i2c_client *client, int kind,
+			struct i2c_board_info *info)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	int i;
-	struct i2c_client *client;
-	struct gl518_data *data;
-	int err = 0;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access gl518_{read,write}_value. */
-
-	if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &gl518_driver;
+		return -ENODEV;
 
 	/* Now, we do the remaining detection. */
 
 	if (kind < 0) {
 		if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
 		 || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
-			goto exit_free;
+			return -ENODEV;
 	}
 
 	/* Determine the chip type. */
@@ -526,19 +514,32 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
 				dev_info(&adapter->dev,
 				    "Ignoring 'force' parameter for unknown "
 				    "chip at adapter %d, address 0x%02x\n",
-				    i2c_adapter_id(adapter), address);
-			goto exit_free;
+				    i2c_adapter_id(adapter), client->addr);
+			return -ENODEV;
 		}
 	}
 
-	/* Fill in the remaining client fields */
-	strlcpy(client->name, "gl518sm", I2C_NAME_SIZE);
-	data->type = kind;
-	mutex_init(&data->update_lock);
+	strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
+	return 0;
+}
+
+static int gl518_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct gl518_data *data;
+	int err, revision;
+
+	data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	revision = gl518_read_value(client, GL518_REG_REVISION);
+	data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00;
+	mutex_init(&data->update_lock);
 
 	/* Initialize the GL518SM chip */
 	data->alarm_mask = 0xff;
@@ -546,7 +547,7 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &gl518_group)))
-		goto exit_detach;
+		goto exit_free;
 	if (data->type == gl518sm_r80)
 		if ((err = sysfs_create_group(&client->dev.kobj,
 					      &gl518_group_r80)))
@@ -564,8 +565,6 @@ exit_remove_files:
 	sysfs_remove_group(&client->dev.kobj, &gl518_group);
 	if (data->type == gl518sm_r80)
 		sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
@@ -591,19 +590,15 @@ static void gl518_init_client(struct i2c_client *client)
 	gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
 }
 
-static int gl518_detach_client(struct i2c_client *client)
+static int gl518_remove(struct i2c_client *client)
 {
 	struct gl518_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &gl518_group);
 	if (data->type == gl518sm_r80)
 		sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 8984ef14162..19616f2242b 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -79,26 +79,37 @@ static const u8 GL520_REG_TEMP_MAX_HYST[]	= { 0x06, 0x18 };
  * Function declarations
  */
 
-static int gl520_attach_adapter(struct i2c_adapter *adapter);
-static int gl520_detect(struct i2c_adapter *adapter, int address, int kind);
+static int gl520_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id);
+static int gl520_detect(struct i2c_client *client, int kind,
+			struct i2c_board_info *info);
 static void gl520_init_client(struct i2c_client *client);
-static int gl520_detach_client(struct i2c_client *client);
+static int gl520_remove(struct i2c_client *client);
 static int gl520_read_value(struct i2c_client *client, u8 reg);
 static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
 static struct gl520_data *gl520_update_device(struct device *dev);
 
 /* Driver data */
+static const struct i2c_device_id gl520_id[] = {
+	{ "gl520sm", gl520sm },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, gl520_id);
+
 static struct i2c_driver gl520_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "gl520sm",
 	},
-	.attach_adapter	= gl520_attach_adapter,
-	.detach_client	= gl520_detach_client,
+	.probe		= gl520_probe,
+	.remove		= gl520_remove,
+	.id_table	= gl520_id,
+	.detect		= gl520_detect,
+	.address_data	= &addr_data,
 };
 
 /* Client data */
 struct gl520_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;		/* zero until the following fields are valid */
@@ -669,37 +680,15 @@ static const struct attribute_group gl520_group_opt = {
  * Real code
  */
 
-static int gl520_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, gl520_detect);
-}
-
-static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int gl520_detect(struct i2c_client *client, int kind,
+			struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct gl520_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access gl520_{read,write}_value. */
-
-	if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &gl520_driver;
+		return -ENODEV;
 
 	/* Determine the chip type. */
 	if (kind < 0) {
@@ -707,24 +696,36 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
 		    ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
 		    ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
 			dev_dbg(&client->dev, "Unknown chip type, skipping\n");
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
-	/* Fill in the remaining client fields */
-	strlcpy(client->name, "gl520sm", I2C_NAME_SIZE);
-	mutex_init(&data->update_lock);
+	strlcpy(info->type, "gl520sm", I2C_NAME_SIZE);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
+	return 0;
+}
+
+static int gl520_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct gl520_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
 
 	/* Initialize the GL520SM chip */
 	gl520_init_client(client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &gl520_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	if (data->two_temps) {
 		if ((err = device_create_file(&client->dev,
@@ -764,8 +765,6 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
 exit_remove_files:
 	sysfs_remove_group(&client->dev.kobj, &gl520_group);
 	sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
@@ -811,18 +810,14 @@ static void gl520_init_client(struct i2c_client *client)
 	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
 }
 
-static int gl520_detach_client(struct i2c_client *client)
+static int gl520_remove(struct i2c_client *client)
 {
 	struct gl520_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &gl520_group);
 	sysfs_remove_group(&client->dev.kobj, &gl520_group_opt);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 11628700808..3195a265f0e 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -1,7 +1,7 @@
 /*
  * lm63.c - driver for the National Semiconductor LM63 temperature sensor
  *          with integrated fan control
- * Copyright (C) 2004-2006  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004-2008  Jean Delvare <khali@linux-fr.org>
  * Based on the lm90 driver.
  *
  * The LM63 is a sensor chip made by National Semiconductor. It measures
@@ -128,24 +128,36 @@ I2C_CLIENT_INSMOD_1(lm63);
  * Functions declaration
  */
 
-static int lm63_attach_adapter(struct i2c_adapter *adapter);
-static int lm63_detach_client(struct i2c_client *client);
+static int lm63_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id);
+static int lm63_remove(struct i2c_client *client);
 
 static struct lm63_data *lm63_update_device(struct device *dev);
 
-static int lm63_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm63_detect(struct i2c_client *client, int kind,
+		       struct i2c_board_info *info);
 static void lm63_init_client(struct i2c_client *client);
 
 /*
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id lm63_id[] = {
+	{ "lm63", lm63 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm63_id);
+
 static struct i2c_driver lm63_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm63",
 	},
-	.attach_adapter	= lm63_attach_adapter,
-	.detach_client	= lm63_detach_client,
+	.probe		= lm63_probe,
+	.remove		= lm63_remove,
+	.id_table	= lm63_id,
+	.detect		= lm63_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -153,7 +165,6 @@ static struct i2c_driver lm63_driver = {
  */
 
 struct lm63_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -411,43 +422,14 @@ static const struct attribute_group lm63_group_fan1 = {
  * Real code
  */
 
-static int lm63_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm63_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm63_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm63_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *new_client;
-	struct lm63_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = new_client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	/* The common I2C client data is placed right before the
-	   LM63-specific data. */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm63_driver;
-	new_client->flags = 0;
-
-	/* Default to an LM63 if forced */
-	if (kind == 0)
-		kind = lm63;
+		return -ENODEV;
 
 	if (kind < 0) { /* must identify */
 		u8 man_id, chip_id, reg_config1, reg_config2;
@@ -477,25 +459,38 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind)
 			dev_dbg(&adapter->dev, "Unsupported chip "
 				"(man_id=0x%02X, chip_id=0x%02X).\n",
 				man_id, chip_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
-	strlcpy(new_client->name, "lm63", I2C_NAME_SIZE);
+	strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int lm63_probe(struct i2c_client *new_client,
+		      const struct i2c_device_id *id)
+{
+	struct lm63_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	/* Initialize the LM63 chip */
 	lm63_init_client(new_client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj,
 				      &lm63_group)))
-		goto exit_detach;
+		goto exit_free;
 	if (data->config & 0x04) { /* tachometer enabled */
 		if ((err = sysfs_create_group(&new_client->dev.kobj,
 					      &lm63_group_fan1)))
@@ -513,8 +508,6 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind)
 exit_remove_files:
 	sysfs_remove_group(&new_client->dev.kobj, &lm63_group);
 	sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
@@ -556,18 +549,14 @@ static void lm63_init_client(struct i2c_client *client)
 		(data->config_fan & 0x20) ? "manual" : "auto");
 }
 
-static int lm63_detach_client(struct i2c_client *client)
+static int lm63_remove(struct i2c_client *client)
 {
 	struct lm63_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm63_group);
 	sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 36d5a8c3ad8..866b401ab6e 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -52,7 +52,6 @@ I2C_CLIENT_INSMOD_1(lm77);
 
 /* Each client has this additional data */
 struct lm77_data {
-	struct i2c_client	client;
 	struct device 		*hwmon_dev;
 	struct mutex		update_lock;
 	char			valid;
@@ -65,23 +64,35 @@ struct lm77_data {
 	u8			alarms;
 };
 
-static int lm77_attach_adapter(struct i2c_adapter *adapter);
-static int lm77_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm77_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id);
+static int lm77_detect(struct i2c_client *client, int kind,
+		       struct i2c_board_info *info);
 static void lm77_init_client(struct i2c_client *client);
-static int lm77_detach_client(struct i2c_client *client);
+static int lm77_remove(struct i2c_client *client);
 static u16 lm77_read_value(struct i2c_client *client, u8 reg);
 static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value);
 
 static struct lm77_data *lm77_update_device(struct device *dev);
 
 
+static const struct i2c_device_id lm77_id[] = {
+	{ "lm77", lm77 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm77_id);
+
 /* This is the driver that will be inserted */
 static struct i2c_driver lm77_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm77",
 	},
-	.attach_adapter = lm77_attach_adapter,
-	.detach_client	= lm77_detach_client,
+	.probe		= lm77_probe,
+	.remove		= lm77_remove,
+	.id_table	= lm77_id,
+	.detect		= lm77_detect,
+	.address_data	= &addr_data,
 };
 
 /* straight from the datasheet */
@@ -215,13 +226,6 @@ static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 2);
 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1);
 
-static int lm77_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm77_detect);
-}
-
 static struct attribute *lm77_attributes[] = {
 	&dev_attr_temp1_input.attr,
 	&dev_attr_temp1_crit.attr,
@@ -240,32 +244,15 @@ static const struct attribute_group lm77_group = {
 	.attrs = lm77_attributes,
 };
 
-/* This function is called by i2c_probe */
-static int lm77_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm77_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct lm77_data *data;
-	int err = 0;
-	const char *name = "";
+	struct i2c_adapter *adapter = new_client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access lm77_{read,write}_value. */
-	if (!(data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm77_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/* Here comes the remaining detection.  Since the LM77 has no
 	   register dedicated to identification, we have to rely on the
@@ -294,7 +281,7 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind)
 			    || i2c_smbus_read_word_data(new_client, i + 3) != crit
 			    || i2c_smbus_read_word_data(new_client, i + 4) != min
 			    || i2c_smbus_read_word_data(new_client, i + 5) != max)
-				goto exit_free;
+				return -ENODEV;
 
 		/* sign bits */
 		if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
@@ -302,51 +289,55 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind)
 		    || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
 		    || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
 		    || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
-			goto exit_free;
+			return -ENODEV;
 
 		/* unused bits */
 		if (conf & 0xe0)
-			goto exit_free;
+			return -ENODEV;
 
 		/* 0x06 and 0x07 return the last read value */
 		cur = i2c_smbus_read_word_data(new_client, 0);
 		if (i2c_smbus_read_word_data(new_client, 6) != cur
 		    || i2c_smbus_read_word_data(new_client, 7) != cur)
-			goto exit_free;
+			return -ENODEV;
 		hyst = i2c_smbus_read_word_data(new_client, 2);
 		if (i2c_smbus_read_word_data(new_client, 6) != hyst
 		    || i2c_smbus_read_word_data(new_client, 7) != hyst)
-			goto exit_free;
+			return -ENODEV;
 		min = i2c_smbus_read_word_data(new_client, 4);
 		if (i2c_smbus_read_word_data(new_client, 6) != min
 		    || i2c_smbus_read_word_data(new_client, 7) != min)
-			goto exit_free;
+			return -ENODEV;
 
 	}
 
-	/* Determine the chip type - only one kind supported! */
-	if (kind <= 0)
-		kind = lm77;
+	strlcpy(info->type, "lm77", I2C_NAME_SIZE);
 
-	if (kind == lm77) {
-		name = "lm77";
+	return 0;
+}
+
+static int lm77_probe(struct i2c_client *new_client,
+		      const struct i2c_device_id *id)
+{
+	struct lm77_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
 	}
 
-	/* Fill in the remaining client fields and put it into the global list */
-	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	/* Initialize the LM77 chip */
 	lm77_init_client(new_client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm77_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&new_client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -358,20 +349,17 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove:
 	sysfs_remove_group(&new_client->dev.kobj, &lm77_group);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int lm77_detach_client(struct i2c_client *client)
+static int lm77_remove(struct i2c_client *client)
 {
 	struct lm77_data *data = i2c_get_clientdata(client);
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm77_group);
-	i2c_detach_client(client);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 26c91c9d476..bcffc189940 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -108,7 +108,6 @@ static inline long TEMP_FROM_REG(u16 temp)
  */
 
 struct lm80_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
@@ -132,10 +131,12 @@ struct lm80_data {
  * Functions declaration
  */
 
-static int lm80_attach_adapter(struct i2c_adapter *adapter);
-static int lm80_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm80_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id);
+static int lm80_detect(struct i2c_client *client, int kind,
+		       struct i2c_board_info *info);
 static void lm80_init_client(struct i2c_client *client);
-static int lm80_detach_client(struct i2c_client *client);
+static int lm80_remove(struct i2c_client *client);
 static struct lm80_data *lm80_update_device(struct device *dev);
 static int lm80_read_value(struct i2c_client *client, u8 reg);
 static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value);
@@ -144,12 +145,22 @@ static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value);
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id lm80_id[] = {
+	{ "lm80", lm80 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm80_id);
+
 static struct i2c_driver lm80_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm80",
 	},
-	.attach_adapter	= lm80_attach_adapter,
-	.detach_client	= lm80_detach_client,
+	.probe		= lm80_probe,
+	.remove		= lm80_remove,
+	.id_table	= lm80_id,
+	.detect		= lm80_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -383,13 +394,6 @@ static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 13);
  * Real code
  */
 
-static int lm80_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm80_detect);
-}
-
 static struct attribute *lm80_attributes[] = {
 	&sensor_dev_attr_in0_min.dev_attr.attr,
 	&sensor_dev_attr_in1_min.dev_attr.attr,
@@ -442,53 +446,46 @@ static const struct attribute_group lm80_group = {
 	.attrs = lm80_attributes,
 };
 
-static int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm80_detect(struct i2c_client *client, int kind,
+		       struct i2c_board_info *info)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	int i, cur;
-	struct i2c_client *client;
-	struct lm80_data *data;
-	int err = 0;
-	const char *name;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access lm80_{read,write}_value. */
-	if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &lm80_driver;
+		return -ENODEV;
 
 	/* Now, we do the remaining detection. It is lousy. */
 	if (lm80_read_value(client, LM80_REG_ALARM2) & 0xc0)
-		goto error_free;
+		return -ENODEV;
 	for (i = 0x2a; i <= 0x3d; i++) {
 		cur = i2c_smbus_read_byte_data(client, i);
 		if ((i2c_smbus_read_byte_data(client, i + 0x40) != cur)
 		 || (i2c_smbus_read_byte_data(client, i + 0x80) != cur)
 		 || (i2c_smbus_read_byte_data(client, i + 0xc0) != cur))
-		    goto error_free;
+		    return -ENODEV;
 	}
 
-	/* Determine the chip type - only one kind supported! */
-	kind = lm80;
-	name = "lm80";
+	strlcpy(info->type, "lm80", I2C_NAME_SIZE);
 
-	/* Fill in the remaining client fields */
-	strlcpy(client->name, name, I2C_NAME_SIZE);
-	mutex_init(&data->update_lock);
+	return 0;
+}
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto error_free;
+static int lm80_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id)
+{
+	struct lm80_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
 
 	/* Initialize the LM80 chip */
 	lm80_init_client(client);
@@ -499,7 +496,7 @@ static int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &lm80_group)))
-		goto error_detach;
+		goto error_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -511,23 +508,18 @@ static int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
 
 error_remove:
 	sysfs_remove_group(&client->dev.kobj, &lm80_group);
-error_detach:
-	i2c_detach_client(client);
 error_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int lm80_detach_client(struct i2c_client *client)
+static int lm80_remove(struct i2c_client *client)
 {
 	struct lm80_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm80_group);
-	if ((err = i2c_detach_client(client)))
-		return err;
 
 	kfree(data);
 	return 0;
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 6a8642fa25f..e59e2d1f080 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -1,7 +1,7 @@
 /*
  * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
  *          monitoring
- * Copyright (C) 2003-2006  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
  *
  * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
  * a sensor chip made by National Semiconductor. It reports up to four
@@ -118,21 +118,34 @@ static const u8 LM83_REG_W_HIGH[] = {
  * Functions declaration
  */
 
-static int lm83_attach_adapter(struct i2c_adapter *adapter);
-static int lm83_detect(struct i2c_adapter *adapter, int address, int kind);
-static int lm83_detach_client(struct i2c_client *client);
+static int lm83_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info);
+static int lm83_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id);
+static int lm83_remove(struct i2c_client *client);
 static struct lm83_data *lm83_update_device(struct device *dev);
 
 /*
  * Driver data (common to all clients)
  */
  
+static const struct i2c_device_id lm83_id[] = {
+	{ "lm83", lm83 },
+	{ "lm82", lm82 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm83_id);
+
 static struct i2c_driver lm83_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm83",
 	},
-	.attach_adapter	= lm83_attach_adapter,
-	.detach_client	= lm83_detach_client,
+	.probe		= lm83_probe,
+	.remove		= lm83_remove,
+	.id_table	= lm83_id,
+	.detect		= lm83_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -140,7 +153,6 @@ static struct i2c_driver lm83_driver = {
  */
 
 struct lm83_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -278,40 +290,15 @@ static const struct attribute_group lm83_group_opt = {
  * Real code
  */
 
-static int lm83_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm83_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm83_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *new_client;
-	struct lm83_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = new_client->adapter;
 	const char *name = "";
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	/* The common I2C client data is placed right after the
-	 * LM83-specific data. */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm83_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/* Now we do the detection and identification. A negative kind
 	 * means that the driver was loaded with no force parameter
@@ -335,8 +322,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
 		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
 		    & 0x41) != 0x00)) {
 			dev_dbg(&adapter->dev,
-			    "LM83 detection failed at 0x%02x.\n", address);
-			goto exit_free;
+				"LM83 detection failed at 0x%02x.\n",
+				new_client->addr);
+			return -ENODEV;
 		}
 	}
 
@@ -361,7 +349,7 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
 			dev_info(&adapter->dev,
 			    "Unsupported chip (man_id=0x%02X, "
 			    "chip_id=0x%02X).\n", man_id, chip_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
@@ -372,15 +360,27 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
 		name = "lm82";
 	}
 
-	/* We can fill in the remaining client fields */
-	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	strlcpy(info->type, name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int lm83_probe(struct i2c_client *new_client,
+		      const struct i2c_device_id *id)
+{
+	struct lm83_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	/*
 	 * Register sysfs hooks
 	 * The LM82 can only monitor one external diode which is
@@ -389,9 +389,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
 	 */
 
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group)))
-		goto exit_detach;
+		goto exit_free;
 
-	if (kind == lm83) {
+	if (id->driver_data == lm83) {
 		if ((err = sysfs_create_group(&new_client->dev.kobj,
 					      &lm83_group_opt)))
 			goto exit_remove_files;
@@ -408,26 +408,20 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
 exit_remove_files:
 	sysfs_remove_group(&new_client->dev.kobj, &lm83_group);
 	sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int lm83_detach_client(struct i2c_client *client)
+static int lm83_remove(struct i2c_client *client)
 {
 	struct lm83_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm83_group);
 	sysfs_remove_group(&client->dev.kobj, &lm83_group_opt);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index e1c183f0aae..21970f0d53a 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -5,7 +5,7 @@
  *                          Philip Edelbrock <phil@netroedge.com>
  *                          Stephen Rousset <stephen.rousset@rocketlogix.com>
  *                          Dan Eaton <dan.eaton@rocketlogix.com>
- * Copyright (C) 2004,2007  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004-2008  Jean Delvare <khali@linux-fr.org>
  *
  * Original port to Linux 2.6 by Jeff Oliver.
  *
@@ -157,22 +157,35 @@ static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C };
  * Functions declaration
  */
 
-static int lm87_attach_adapter(struct i2c_adapter *adapter);
-static int lm87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm87_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id);
+static int lm87_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info);
 static void lm87_init_client(struct i2c_client *client);
-static int lm87_detach_client(struct i2c_client *client);
+static int lm87_remove(struct i2c_client *client);
 static struct lm87_data *lm87_update_device(struct device *dev);
 
 /*
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id lm87_id[] = {
+	{ "lm87", lm87 },
+	{ "adm1024", adm1024 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm87_id);
+
 static struct i2c_driver lm87_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm87",
 	},
-	.attach_adapter	= lm87_attach_adapter,
-	.detach_client	= lm87_detach_client,
+	.probe		= lm87_probe,
+	.remove		= lm87_remove,
+	.id_table	= lm87_id,
+	.detect		= lm87_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -180,7 +193,6 @@ static struct i2c_driver lm87_driver = {
  */
 
 struct lm87_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -562,13 +574,6 @@ static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15);
  * Real code
  */
 
-static int lm87_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm87_detect);
-}
-
 static struct attribute *lm87_attributes[] = {
 	&dev_attr_in1_input.attr,
 	&dev_attr_in1_min.attr,
@@ -656,33 +661,15 @@ static const struct attribute_group lm87_group_opt = {
 	.attrs = lm87_attributes_opt,
 };
 
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm87_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct lm87_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = new_client->adapter;
 	static const char *names[] = { "lm87", "adm1024" };
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	/* The common I2C client data is placed right before the
-	   LM87-specific data. */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm87_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/* Default to an LM87 if forced */
 	if (kind == 0)
@@ -704,20 +691,32 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
 		 || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
 			dev_dbg(&adapter->dev,
 				"LM87 detection failed at 0x%02x.\n",
-				address);
-			goto exit_free;
+				new_client->addr);
+			return -ENODEV;
 		}
 	}
 
-	/* We can fill in the remaining client fields */
-	strlcpy(new_client->name, names[kind - 1], I2C_NAME_SIZE);
+	strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int lm87_probe(struct i2c_client *new_client,
+		      const struct i2c_device_id *id)
+{
+	struct lm87_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	/* Initialize the LM87 chip */
 	lm87_init_client(new_client);
 
@@ -732,7 +731,7 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm87_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	if (data->channel & CHAN_NO_FAN(0)) {
 		if ((err = device_create_file(&new_client->dev,
@@ -832,8 +831,6 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
 exit_remove:
 	sysfs_remove_group(&new_client->dev.kobj, &lm87_group);
 	sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
@@ -877,18 +874,14 @@ static void lm87_init_client(struct i2c_client *client)
 	}
 }
 
-static int lm87_detach_client(struct i2c_client *client)
+static int lm87_remove(struct i2c_client *client)
 {
 	struct lm87_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm87_group);
 	sysfs_remove_group(&client->dev.kobj, &lm87_group_opt);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index d1a3da3dd8e..c24fe36ac78 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -187,23 +187,44 @@ I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680);
  * Functions declaration
  */
 
-static int lm90_attach_adapter(struct i2c_adapter *adapter);
-static int lm90_detect(struct i2c_adapter *adapter, int address,
-	int kind);
+static int lm90_detect(struct i2c_client *client, int kind,
+		       struct i2c_board_info *info);
+static int lm90_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id);
 static void lm90_init_client(struct i2c_client *client);
-static int lm90_detach_client(struct i2c_client *client);
+static int lm90_remove(struct i2c_client *client);
 static struct lm90_data *lm90_update_device(struct device *dev);
 
 /*
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id lm90_id[] = {
+	{ "adm1032", adm1032 },
+	{ "adt7461", adt7461 },
+	{ "lm90", lm90 },
+	{ "lm86", lm86 },
+	{ "lm89", lm99 },
+	{ "lm99", lm99 },	/* Missing temperature offset */
+	{ "max6657", max6657 },
+	{ "max6658", max6657 },
+	{ "max6659", max6657 },
+	{ "max6680", max6680 },
+	{ "max6681", max6680 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm90_id);
+
 static struct i2c_driver lm90_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm90",
 	},
-	.attach_adapter	= lm90_attach_adapter,
-	.detach_client	= lm90_detach_client,
+	.probe		= lm90_probe,
+	.remove		= lm90_remove,
+	.id_table	= lm90_id,
+	.detect		= lm90_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -211,7 +232,6 @@ static struct i2c_driver lm90_driver = {
  */
 
 struct lm90_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -477,40 +497,16 @@ static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value)
 	return 0;
 }
 
-static int lm90_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm90_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm90_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct lm90_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = new_client->adapter;
+	int address = new_client->addr;
 	const char *name = "";
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	/* The common I2C client data is placed right before the
-	   LM90-specific data. */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm90_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/*
 	 * Now we do the remaining detection. A negative kind means that
@@ -538,7 +534,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
 						LM90_REG_R_CONFIG1)) < 0
 		 || (reg_convrate = i2c_smbus_read_byte_data(new_client,
 						LM90_REG_R_CONVRATE)) < 0)
-			goto exit_free;
+			return -ENODEV;
 		
 		if ((address == 0x4C || address == 0x4D)
 		 && man_id == 0x01) { /* National Semiconductor */
@@ -546,7 +542,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
 
 			if ((reg_config2 = i2c_smbus_read_byte_data(new_client,
 						LM90_REG_R_CONFIG2)) < 0)
-				goto exit_free;
+				return -ENODEV;
 
 			if ((reg_config1 & 0x2A) == 0x00
 			 && (reg_config2 & 0xF8) == 0x00
@@ -610,10 +606,11 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
 			dev_info(&adapter->dev,
 			    "Unsupported chip (man_id=0x%02X, "
 			    "chip_id=0x%02X).\n", man_id, chip_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
+	/* Fill the i2c board info */
 	if (kind == lm90) {
 		name = "lm90";
 	} else if (kind == adm1032) {
@@ -621,7 +618,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
 		/* The ADM1032 supports PEC, but only if combined
 		   transactions are not used. */
 		if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
-			new_client->flags |= I2C_CLIENT_PEC;
+			info->flags |= I2C_CLIENT_PEC;
 	} else if (kind == lm99) {
 		name = "lm99";
 	} else if (kind == lm86) {
@@ -633,23 +630,39 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
 	} else if (kind == adt7461) {
 		name = "adt7461";
 	}
+	strlcpy(info->type, name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int lm90_probe(struct i2c_client *new_client,
+		      const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(new_client->dev.parent);
+	struct lm90_data *data;
+	int err;
 
-	/* We can fill in the remaining client fields */
-	strlcpy(new_client->name, name, I2C_NAME_SIZE);
-	data->valid = 0;
-	data->kind = kind;
+	data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	i2c_set_clientdata(new_client, data);
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
+	/* Set the device type */
+	data->kind = id->driver_data;
+	if (data->kind == adm1032) {
+		if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+			new_client->flags &= ~I2C_CLIENT_PEC;
+	}
 
 	/* Initialize the LM90 chip */
 	lm90_init_client(new_client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group)))
-		goto exit_detach;
+		goto exit_free;
 	if (new_client->flags & I2C_CLIENT_PEC) {
 		if ((err = device_create_file(&new_client->dev,
 					      &dev_attr_pec)))
@@ -672,8 +685,6 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
 exit_remove_files:
 	sysfs_remove_group(&new_client->dev.kobj, &lm90_group);
 	device_remove_file(&new_client->dev, &dev_attr_pec);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
@@ -710,10 +721,9 @@ static void lm90_init_client(struct i2c_client *client)
 		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
 }
 
-static int lm90_detach_client(struct i2c_client *client)
+static int lm90_remove(struct i2c_client *client)
 {
 	struct lm90_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm90_group);
@@ -722,9 +732,6 @@ static int lm90_detach_client(struct i2c_client *client)
 		device_remove_file(&client->dev,
 				   &sensor_dev_attr_temp2_offset.dev_attr);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index c31942e0824..b2e00c5a7ee 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -1,6 +1,6 @@
 /*
  * lm92 - Hardware monitoring driver
- * Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2005-2008  Jean Delvare <khali@linux-fr.org>
  *
  * Based on the lm90 driver, with some ideas taken from the lm_sensors
  * lm92 driver as well.
@@ -96,7 +96,6 @@ static struct i2c_driver lm92_driver;
 
 /* Client data (each client gets its own) */
 struct lm92_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -319,32 +318,15 @@ static const struct attribute_group lm92_group = {
 	.attrs = lm92_attributes,
 };
 
-/* The following function does more than just detection. If detection
-   succeeds, it also registers the new chip. */
-static int lm92_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm92_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct lm92_data *data;
-	int err = 0;
-	char *name;
+	struct i2c_adapter *adapter = new_client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
 					    | I2C_FUNC_SMBUS_WORD_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	/* Fill in enough client fields so that we can read from the chip,
-	   which is required for identication */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm92_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/* A negative kind means that the driver was loaded with no force
 	   parameter (default), so we must identify the chip. */
@@ -364,34 +346,36 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind)
 			kind = lm92; /* No separate prefix */
 		}
 		else
-			goto exit_free;
-	} else
-	if (kind == 0) /* Default to an LM92 if forced */
-		kind = lm92;
-
-	/* Give it the proper name */
-	if (kind == lm92) {
-		name = "lm92";
-	} else { /* Supposedly cannot happen */
-		dev_dbg(&new_client->dev, "Kind out of range?\n");
-		goto exit_free;
+			return -ENODEV;
 	}
 
-	/* Fill in the remaining client fields */
-	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	strlcpy(info->type, "lm92", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int lm92_probe(struct i2c_client *new_client,
+		      const struct i2c_device_id *id)
+{
+	struct lm92_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the i2c subsystem a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	/* Initialize the chipset */
 	lm92_init_client(new_client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm92_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&new_client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -403,32 +387,19 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove:
 	sysfs_remove_group(&new_client->dev.kobj, &lm92_group);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int lm92_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm92_detect);
-}
-
-static int lm92_detach_client(struct i2c_client *client)
+static int lm92_remove(struct i2c_client *client)
 {
 	struct lm92_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm92_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
@@ -438,12 +409,23 @@ static int lm92_detach_client(struct i2c_client *client)
  * Module and driver stuff
  */
 
+static const struct i2c_device_id lm92_id[] = {
+	{ "lm92", lm92 },
+	/* max6635 could be added here */
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm92_id);
+
 static struct i2c_driver lm92_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm92",
 	},
-	.attach_adapter	= lm92_attach_adapter,
-	.detach_client	= lm92_detach_client,
+	.probe		= lm92_probe,
+	.remove		= lm92_remove,
+	.id_table	= lm92_id,
+	.detect		= lm92_detect,
+	.address_data	= &addr_data,
 };
 
 static int __init sensors_lm92_init(void)
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 5e678f5c883..fc36cadf36f 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -200,7 +200,6 @@ struct block1_t {
  * Client-specific data
  */
 struct lm93_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 
 	struct mutex update_lock;
@@ -2501,45 +2500,14 @@ static void lm93_init_client(struct i2c_client *client)
 		 "chip to signal ready!\n");
 }
 
-static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm93_detect(struct i2c_client *client, int kind,
+		       struct i2c_board_info *info)
 {
-	struct lm93_data *data;
-	struct i2c_client *client;
-
-	int err = -ENODEV, func;
-	void (*update)(struct lm93_data *, struct i2c_client *);
-
-	/* choose update routine based on bus capabilities */
-	func = i2c_get_functionality(adapter);
-	if ( ((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
-			(!disable_block) ) {
-		dev_dbg(&adapter->dev,"using SMBus block data transactions\n");
-		update = lm93_update_client_full;
-	} else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
-		dev_dbg(&adapter->dev,"disabled SMBus block data "
-			"transactions\n");
-		update = lm93_update_client_min;
-	} else {
-		dev_dbg(&adapter->dev,"detect failed, "
-			"smbus byte and/or word data not supported!\n");
-		goto err_out;
-	}
+	struct i2c_adapter *adapter = client->adapter;
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access lm78_{read,write}_value. */
-
-	if ( !(data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL))) {
-		dev_dbg(&adapter->dev,"out of memory!\n");
-		err = -ENOMEM;
-		goto err_out;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &lm93_driver;
+	if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
+		return -ENODEV;
 
 	/* detection */
 	if (kind < 0) {
@@ -2548,7 +2516,7 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
 		if (mfr != 0x01) {
 			dev_dbg(&adapter->dev,"detect failed, "
 				"bad manufacturer id 0x%02x!\n", mfr);
-			goto err_free;
+			return -ENODEV;
 		}
 	}
 
@@ -2563,31 +2531,61 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
 			if (kind == 0)
 				dev_dbg(&adapter->dev,
 					"(ignored 'force' parameter)\n");
-			goto err_free;
+			return -ENODEV;
 		}
 	}
 
-	/* fill in remaining client fields */
-	strlcpy(client->name, "lm93", I2C_NAME_SIZE);
+	strlcpy(info->type, "lm93", I2C_NAME_SIZE);
 	dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n",
 		client->name, i2c_adapter_id(client->adapter),
 		client->addr);
 
+	return 0;
+}
+
+static int lm93_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id)
+{
+	struct lm93_data *data;
+	int err, func;
+	void (*update)(struct lm93_data *, struct i2c_client *);
+
+	/* choose update routine based on bus capabilities */
+	func = i2c_get_functionality(client->adapter);
+	if (((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
+			(!disable_block)) {
+		dev_dbg(&client->dev, "using SMBus block data transactions\n");
+		update = lm93_update_client_full;
+	} else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
+		dev_dbg(&client->dev, "disabled SMBus block data "
+			"transactions\n");
+		update = lm93_update_client_min;
+	} else {
+		dev_dbg(&client->dev, "detect failed, "
+			"smbus byte and/or word data not supported!\n");
+		err = -ENODEV;
+		goto err_out;
+	}
+
+	data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL);
+	if (!data) {
+		dev_dbg(&client->dev, "out of memory!\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+	i2c_set_clientdata(client, data);
+
 	/* housekeeping */
 	data->valid = 0;
 	data->update = update;
 	mutex_init(&data->update_lock);
 
-	/* tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto err_free;
-
 	/* initialize the chip */
 	lm93_init_client(client);
 
 	err = sysfs_create_group(&client->dev.kobj, &lm93_attr_grp);
 	if (err)
-		goto err_detach;
+		goto err_free;
 
 	/* Register hwmon driver class */
 	data->hwmon_dev = hwmon_device_register(&client->dev);
@@ -2597,43 +2595,39 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
 	err = PTR_ERR(data->hwmon_dev);
 	dev_err(&client->dev, "error registering hwmon device.\n");
 	sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
-err_detach:
-	i2c_detach_client(client);
 err_free:
 	kfree(data);
 err_out:
 	return err;
 }
 
-/* This function is called when:
-     * lm93_driver is inserted (when this module is loaded), for each
-       available adapter
-     * when a new adapter is inserted (and lm93_driver is still present) */
-static int lm93_attach_adapter(struct i2c_adapter *adapter)
-{
-	return i2c_probe(adapter, &addr_data, lm93_detect);
-}
-
-static int lm93_detach_client(struct i2c_client *client)
+static int lm93_remove(struct i2c_client *client)
 {
 	struct lm93_data *data = i2c_get_clientdata(client);
-	int err = 0;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
 
-	err = i2c_detach_client(client);
-	if (!err)
-		kfree(data);
-	return err;
+	kfree(data);
+	return 0;
 }
 
+static const struct i2c_device_id lm93_id[] = {
+	{ "lm93", lm93 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm93_id);
+
 static struct i2c_driver lm93_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm93",
 	},
-	.attach_adapter	= lm93_attach_adapter,
-	.detach_client	= lm93_detach_client,
+	.probe		= lm93_probe,
+	.remove		= lm93_remove,
+	.id_table	= lm93_id,
+	.detect		= lm93_detect,
+	.address_data	= &addr_data,
 };
 
 static int __init lm93_init(void)
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 7e7267a0454..1ab1cacad59 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -79,23 +79,34 @@ I2C_CLIENT_INSMOD_1(max1619);
  * Functions declaration
  */
 
-static int max1619_attach_adapter(struct i2c_adapter *adapter);
-static int max1619_detect(struct i2c_adapter *adapter, int address,
-	int kind);
+static int max1619_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int max1619_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
 static void max1619_init_client(struct i2c_client *client);
-static int max1619_detach_client(struct i2c_client *client);
+static int max1619_remove(struct i2c_client *client);
 static struct max1619_data *max1619_update_device(struct device *dev);
 
 /*
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id max1619_id[] = {
+	{ "max1619", max1619 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max1619_id);
+
 static struct i2c_driver max1619_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "max1619",
 	},
-	.attach_adapter	= max1619_attach_adapter,
-	.detach_client	= max1619_detach_client,
+	.probe		= max1619_probe,
+	.remove		= max1619_remove,
+	.id_table	= max1619_id,
+	.detect		= max1619_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -103,7 +114,6 @@ static struct i2c_driver max1619_driver = {
  */
 
 struct max1619_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -208,41 +218,15 @@ static const struct attribute_group max1619_group = {
  * Real code
  */
 
-static int max1619_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, max1619_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max1619_detect(struct i2c_client *new_client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct max1619_data *data;
-	int err = 0;
-	const char *name = "";	
+	struct i2c_adapter *adapter = new_client->adapter;
 	u8 reg_config=0, reg_convrate=0, reg_status=0;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	/* The common I2C client data is placed right before the
-	   MAX1619-specific data. */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &max1619_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/*
 	 * Now we do the remaining detection. A negative kind means that
@@ -265,8 +249,8 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
 		 || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) {
 			dev_dbg(&adapter->dev,
 				"MAX1619 detection failed at 0x%02x.\n",
-				address);
-			goto exit_free;
+				new_client->addr);
+			return -ENODEV;
 		}
 	}
 
@@ -285,28 +269,37 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
 			dev_info(&adapter->dev,
 			    "Unsupported chip (man_id=0x%02X, "
 			    "chip_id=0x%02X).\n", man_id, chip_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
-	if (kind == max1619)
-		name = "max1619";
+	strlcpy(info->type, "max1619", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int max1619_probe(struct i2c_client *new_client,
+			 const struct i2c_device_id *id)
+{
+	struct max1619_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
 
-	/* We can fill in the remaining client fields */
-	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	/* Initialize the MAX1619 chip */
 	max1619_init_client(new_client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &max1619_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&new_client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -318,8 +311,6 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove_files:
 	sysfs_remove_group(&new_client->dev.kobj, &max1619_group);
-exit_detach:
-	i2c_detach_client(new_client);
 exit_free:
 	kfree(data);
 exit:
@@ -341,17 +332,13 @@ static void max1619_init_client(struct i2c_client *client)
 					  config & 0xBF); /* run */
 }
 
-static int max1619_detach_client(struct i2c_client *client)
+static int max1619_remove(struct i2c_client *client)
 {
 	struct max1619_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &max1619_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 52d528b76cc..f27af6a9da4 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -104,22 +104,34 @@ I2C_CLIENT_INSMOD_1(max6650);
 
 #define DIV_FROM_REG(reg) (1 << (reg & 7))
 
-static int max6650_attach_adapter(struct i2c_adapter *adapter);
-static int max6650_detect(struct i2c_adapter *adapter, int address, int kind);
+static int max6650_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int max6650_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
 static int max6650_init_client(struct i2c_client *client);
-static int max6650_detach_client(struct i2c_client *client);
+static int max6650_remove(struct i2c_client *client);
 static struct max6650_data *max6650_update_device(struct device *dev);
 
 /*
  * Driver data (common to all clients)
  */
 
+static const struct i2c_device_id max6650_id[] = {
+	{ "max6650", max6650 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max6650_id);
+
 static struct i2c_driver max6650_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "max6650",
 	},
-	.attach_adapter	= max6650_attach_adapter,
-	.detach_client	= max6650_detach_client,
+	.probe		= max6650_probe,
+	.remove		= max6650_remove,
+	.id_table	= max6650_id,
+	.detect		= max6650_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -128,7 +140,6 @@ static struct i2c_driver max6650_driver = {
 
 struct max6650_data
 {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -437,47 +448,21 @@ static struct attribute_group max6650_attr_grp = {
  * Real code
  */
 
-static int max6650_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max6650_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON)) {
-		dev_dbg(&adapter->dev,
-			"FATAL: max6650_attach_adapter class HWMON not set\n");
-		return 0;
-	}
-
-	return i2c_probe(adapter, &addr_data, max6650_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-
-static int max6650_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *client;
-	struct max6650_data *data;
-	int err = -ENODEV;
+	struct i2c_adapter *adapter = client->adapter;
+	int address = client->addr;
 
 	dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind);
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support "
 					"byte read mode, skipping.\n");
-		return 0;
-	}
-
-	if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) {
-		dev_err(&adapter->dev, "max6650: out of memory.\n");
-		return -ENOMEM;
+		return -ENODEV;
 	}
 
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &max6650_driver;
-
 	/*
 	 * Now we do the remaining detection. A negative kind means that
 	 * the driver was loaded with no force parameter (default), so we
@@ -501,28 +486,40 @@ static int max6650_detect(struct i2c_adapter *adapter, int address, int kind)
 	    ||(i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT) & 0xFC))) {
 		dev_dbg(&adapter->dev,
 			"max6650: detection failed at 0x%02x.\n", address);
-		goto err_free;
+		return -ENODEV;
 	}
 
 	dev_info(&adapter->dev, "max6650: chip found at 0x%02x.\n", address);
 
-	strlcpy(client->name, "max6650", I2C_NAME_SIZE);
-	mutex_init(&data->update_lock);
+	strlcpy(info->type, "max6650", I2C_NAME_SIZE);
 
-	if ((err = i2c_attach_client(client))) {
-		dev_err(&adapter->dev, "max6650: failed to attach client.\n");
-		goto err_free;
+	return 0;
+}
+
+static int max6650_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct max6650_data *data;
+	int err;
+
+	if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) {
+		dev_err(&client->dev, "out of memory.\n");
+		return -ENOMEM;
 	}
 
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
 	/*
 	 * Initialize the max6650 chip
 	 */
-	if (max6650_init_client(client))
-		goto err_detach;
+	err = max6650_init_client(client);
+	if (err)
+		goto err_free;
 
 	err = sysfs_create_group(&client->dev.kobj, &max6650_attr_grp);
 	if (err)
-		goto err_detach;
+		goto err_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (!IS_ERR(data->hwmon_dev))
@@ -531,24 +528,19 @@ static int max6650_detect(struct i2c_adapter *adapter, int address, int kind)
 	err = PTR_ERR(data->hwmon_dev);
 	dev_err(&client->dev, "error registering hwmon device.\n");
 	sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
-err_detach:
-	i2c_detach_client(client);
 err_free:
 	kfree(data);
 	return err;
 }
 
-static int max6650_detach_client(struct i2c_client *client)
+static int max6650_remove(struct i2c_client *client)
 {
 	struct max6650_data *data = i2c_get_clientdata(client);
-	int err;
 
 	sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
 	hwmon_device_unregister(data->hwmon_dev);
-	err = i2c_detach_client(client);
-	if (!err)
-		kfree(data);
-	return err;
+	kfree(data);
+	return 0;
 }
 
 static int max6650_init_client(struct i2c_client *client)
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index 3c9db6598ba..8bb5cb532d4 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -96,7 +96,6 @@ static inline int TEMP_FROM_REG(s8 val)
 }
 
 struct smsc47m192_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
@@ -114,18 +113,29 @@ struct smsc47m192_data {
 	u8 vrm;
 };
 
-static int smsc47m192_attach_adapter(struct i2c_adapter *adapter);
-static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
-		int kind);
-static int smsc47m192_detach_client(struct i2c_client *client);
+static int smsc47m192_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id);
+static int smsc47m192_detect(struct i2c_client *client, int kind,
+			     struct i2c_board_info *info);
+static int smsc47m192_remove(struct i2c_client *client);
 static struct smsc47m192_data *smsc47m192_update_device(struct device *dev);
 
+static const struct i2c_device_id smsc47m192_id[] = {
+	{ "smsc47m192", smsc47m192 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, smsc47m192_id);
+
 static struct i2c_driver smsc47m192_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "smsc47m192",
 	},
-	.attach_adapter	= smsc47m192_attach_adapter,
-	.detach_client	= smsc47m192_detach_client,
+	.probe		= smsc47m192_probe,
+	.remove		= smsc47m192_remove,
+	.id_table	= smsc47m192_id,
+	.detect		= smsc47m192_detect,
+	.address_data	= &addr_data,
 };
 
 /* Voltages */
@@ -440,17 +450,6 @@ static const struct attribute_group smsc47m192_group_in4 = {
 	.attrs = smsc47m192_attributes_in4,
 };
 
-/* This function is called when:
-    * smsc47m192_driver is inserted (when this module is loaded), for each
-      available adapter
-    * when a new adapter is inserted (and smsc47m192_driver is still present) */
-static int smsc47m192_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, smsc47m192_detect);
-}
-
 static void smsc47m192_init_client(struct i2c_client *client)
 {
 	int i;
@@ -481,31 +480,15 @@ static void smsc47m192_init_client(struct i2c_client *client)
 	}
 }
 
-/* This function is called by i2c_probe */
-static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
-		int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int smsc47m192_detect(struct i2c_client *client, int kind,
+			     struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct smsc47m192_data *data;
-	int err = 0;
-	int version, config;
+	struct i2c_adapter *adapter = client->adapter;
+	int version;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &smsc47m192_driver;
-
-	if (kind == 0)
-		kind = smsc47m192;
+		return -ENODEV;
 
 	/* Detection criteria from sensors_detect script */
 	if (kind < 0) {
@@ -523,26 +506,39 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
 		} else {
 			dev_dbg(&adapter->dev,
 				"SMSC47M192 detection failed at 0x%02x\n",
-				address);
-			goto exit_free;
+				client->addr);
+			return -ENODEV;
 		}
 	}
 
-	/* Fill in the remaining client fields and put into the global list */
-	strlcpy(client->name, "smsc47m192", I2C_NAME_SIZE);
+	strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int smsc47m192_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct smsc47m192_data *data;
+	int config;
+	int err;
+
+	data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
 	data->vrm = vid_which_vrm();
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
-
 	/* Initialize the SMSC47M192 chip */
 	smsc47m192_init_client(client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &smsc47m192_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	/* Pin 110 is either in4 (+12V) or VID4 */
 	config = i2c_smbus_read_byte_data(client, SMSC47M192_REG_CONFIG);
@@ -563,26 +559,20 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
 exit_remove_files:
 	sysfs_remove_group(&client->dev.kobj, &smsc47m192_group);
 	sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int smsc47m192_detach_client(struct i2c_client *client)
+static int smsc47m192_remove(struct i2c_client *client)
 {
 	struct smsc47m192_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &smsc47m192_group);
 	sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 
 	return 0;
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 76a3859c3fb..3b01001108c 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -60,7 +60,6 @@ static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
 
 /* Each client has this additional data */
 struct thmc50_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 
 	struct mutex update_lock;
@@ -77,17 +76,31 @@ struct thmc50_data {
 	u8 alarms;
 };
 
-static int thmc50_attach_adapter(struct i2c_adapter *adapter);
-static int thmc50_detach_client(struct i2c_client *client);
+static int thmc50_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int thmc50_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int thmc50_remove(struct i2c_client *client);
 static void thmc50_init_client(struct i2c_client *client);
 static struct thmc50_data *thmc50_update_device(struct device *dev);
 
+static const struct i2c_device_id thmc50_id[] = {
+	{ "adm1022", adm1022 },
+	{ "thmc50", thmc50 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, thmc50_id);
+
 static struct i2c_driver thmc50_driver = {
+	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "thmc50",
 	},
-	.attach_adapter = thmc50_attach_adapter,
-	.detach_client = thmc50_detach_client,
+	.probe = thmc50_probe,
+	.remove = thmc50_remove,
+	.id_table = thmc50_id,
+	.detect = thmc50_detect,
+	.address_data = &addr_data,
 };
 
 static ssize_t show_analog_out(struct device *dev,
@@ -250,39 +263,23 @@ static const struct attribute_group temp3_group = {
 	.attrs = temp3_attributes,
 };
 
-static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int thmc50_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
 {
 	unsigned company;
 	unsigned revision;
 	unsigned config;
-	struct i2c_client *client;
-	struct thmc50_data *data;
-	struct device *dev;
+	struct i2c_adapter *adapter = client->adapter;
 	int err = 0;
 	const char *type_name;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		pr_debug("thmc50: detect failed, "
 			 "smbus byte data not supported!\n");
-		goto exit;
-	}
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access thmc50 registers. */
-	if (!(data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL))) {
-		pr_debug("thmc50: detect failed, kzalloc failed!\n");
-		err = -ENOMEM;
-		goto exit;
+		return -ENODEV;
 	}
 
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &thmc50_driver;
-	dev = &client->dev;
-
 	pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
 		 client->addr, i2c_adapter_id(client->adapter));
 
@@ -307,21 +304,22 @@ static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind)
 	}
 	if (err == -ENODEV) {
 		pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
-		goto exit_free;
+		return err;
 	}
-	data->type = kind;
 
 	if (kind == adm1022) {
 		int id = i2c_adapter_id(client->adapter);
 		int i;
 
 		type_name = "adm1022";
-		data->has_temp3 = (config >> 7) & 1;	/* config MSB */
 		for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
 			if (adm1022_temp3[i] == id &&
-			    adm1022_temp3[i + 1] == address) {
+			    adm1022_temp3[i + 1] == client->addr) {
 				/* enable 2nd remote temp */
-				data->has_temp3 = 1;
+				config |= (1 << 7);
+				i2c_smbus_write_byte_data(client,
+							  THMC50_REG_CONF,
+							  config);
 				break;
 			}
 	} else {
@@ -330,19 +328,33 @@ static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind)
 	pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
 		 type_name, (revision >> 4) - 0xc, revision & 0xf);
 
-	/* Fill in the remaining client fields & put it into the global list */
-	strlcpy(client->name, type_name, I2C_NAME_SIZE);
-	mutex_init(&data->update_lock);
+	strlcpy(info->type, type_name, I2C_NAME_SIZE);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
+	return 0;
+}
+
+static int thmc50_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct thmc50_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL);
+	if (!data) {
+		pr_debug("thmc50: detect failed, kzalloc failed!\n");
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	data->type = id->driver_data;
+	mutex_init(&data->update_lock);
 
 	thmc50_init_client(client);
 
 	/* Register sysfs hooks */
 	if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group)))
-		goto exit_detach;
+		goto exit_free;
 
 	/* Register ADM1022 sysfs hooks */
 	if (data->has_temp3)
@@ -364,34 +376,21 @@ exit_remove_sysfs:
 		sysfs_remove_group(&client->dev.kobj, &temp3_group);
 exit_remove_sysfs_thmc50:
 	sysfs_remove_group(&client->dev.kobj, &thmc50_group);
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int thmc50_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, thmc50_detect);
-}
-
-static int thmc50_detach_client(struct i2c_client *client)
+static int thmc50_remove(struct i2c_client *client)
 {
 	struct thmc50_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &thmc50_group);
 	if (data->has_temp3)
 		sysfs_remove_group(&client->dev.kobj, &temp3_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 
 	return 0;
@@ -412,8 +411,8 @@ static void thmc50_init_client(struct i2c_client *client)
 	}
 	config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 	config |= 0x1;	/* start the chip if it is in standby mode */
-	if (data->has_temp3)
-		config |= 0x80;		/* enable 2nd remote temp */
+	if (data->type == adm1022 && (config & (1 << 7)))
+		data->has_temp3 = 1;
 	i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 }
 
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 85077c4c803..e4e91c9d480 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -247,7 +247,6 @@ static u8 div_to_reg(int nr, long val)
 }
 
 struct w83791d_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 
@@ -286,9 +285,11 @@ struct w83791d_data {
 	u8 vrm;			/* hwmon-vid */
 };
 
-static int w83791d_attach_adapter(struct i2c_adapter *adapter);
-static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83791d_detach_client(struct i2c_client *client);
+static int w83791d_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int w83791d_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
+static int w83791d_remove(struct i2c_client *client);
 
 static int w83791d_read(struct i2c_client *client, u8 register);
 static int w83791d_write(struct i2c_client *client, u8 register, u8 value);
@@ -300,12 +301,22 @@ static void w83791d_print_debug(struct w83791d_data *data, struct device *dev);
 
 static void w83791d_init_client(struct i2c_client *client);
 
+static const struct i2c_device_id w83791d_id[] = {
+	{ "w83791d", w83791d },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, w83791d_id);
+
 static struct i2c_driver w83791d_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name = "w83791d",
 	},
-	.attach_adapter = w83791d_attach_adapter,
-	.detach_client = w83791d_detach_client,
+	.probe		= w83791d_probe,
+	.remove		= w83791d_remove,
+	.id_table	= w83791d_id,
+	.detect		= w83791d_detect,
+	.address_data	= &addr_data,
 };
 
 /* following are the sysfs callback functions */
@@ -905,49 +916,12 @@ static const struct attribute_group w83791d_group = {
 	.attrs = w83791d_attributes,
 };
 
-/* This function is called when:
-     * w83791d_driver is inserted (when this module is loaded), for each
-       available adapter
-     * when a new adapter is inserted (and w83791d_driver is still present) */
-static int w83791d_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, w83791d_detect);
-}
-
 
-static int w83791d_create_subclient(struct i2c_adapter *adapter,
-				struct i2c_client *client, int addr,
-				struct i2c_client **sub_cli)
-{
-	int err;
-	struct i2c_client *sub_client;
-
-	(*sub_cli) = sub_client =
-			kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (!(sub_client)) {
-		return -ENOMEM;
-	}
-	sub_client->addr = 0x48 + addr;
-	i2c_set_clientdata(sub_client, NULL);
-	sub_client->adapter = adapter;
-	sub_client->driver = &w83791d_driver;
-	strlcpy(sub_client->name, "w83791d subclient", I2C_NAME_SIZE);
-	if ((err = i2c_attach_client(sub_client))) {
-		dev_err(&client->dev, "subclient registration "
-			"at address 0x%x failed\n", sub_client->addr);
-		kfree(sub_client);
-		return err;
-	}
-	return 0;
-}
-
-
-static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address,
-				int kind, struct i2c_client *client)
+static int w83791d_detect_subclients(struct i2c_client *client)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	struct w83791d_data *data = i2c_get_clientdata(client);
+	int address = client->addr;
 	int i, id, err;
 	u8 val;
 
@@ -971,10 +945,7 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address,
 
 	val = w83791d_read(client, W83791D_REG_I2C_SUBADDR);
 	if (!(val & 0x08)) {
-		err = w83791d_create_subclient(adapter, client,
-						val & 0x7, &data->lm75[0]);
-		if (err < 0)
-			goto error_sc_0;
+		data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7));
 	}
 	if (!(val & 0x80)) {
 		if ((data->lm75[0] != NULL) &&
@@ -986,10 +957,8 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address,
 			err = -ENODEV;
 			goto error_sc_1;
 		}
-		err = w83791d_create_subclient(adapter, client,
-					(val >> 4) & 0x7, &data->lm75[1]);
-		if (err < 0)
-			goto error_sc_1;
+		data->lm75[1] = i2c_new_dummy(adapter,
+					      0x48 + ((val >> 4) & 0x7));
 	}
 
 	return 0;
@@ -997,53 +966,31 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address,
 /* Undo inits in case of errors */
 
 error_sc_1:
-	if (data->lm75[0] != NULL) {
-		i2c_detach_client(data->lm75[0]);
-		kfree(data->lm75[0]);
-	}
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
 error_sc_0:
 	return err;
 }
 
 
-static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83791d_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct device *dev;
-	struct w83791d_data *data;
-	int i, val1, val2;
-	int err = 0;
-	const char *client_name = "";
+	struct i2c_adapter *adapter = client->adapter;
+	int val1, val2;
+	unsigned short address = client->addr;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		goto error0;
+		return -ENODEV;
 	}
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access w83791d_{read,write}_value. */
-	if (!(data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto error0;
-	}
-
-	client = &data->client;
-	dev = &client->dev;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &w83791d_driver;
-	mutex_init(&data->update_lock);
-
-	/* Now, we do the remaining detection. */
-
 	/* The w83791d may be stuck in some other bank than bank 0. This may
 	   make reading other information impossible. Specify a force=...
 	   parameter, and the Winbond will be reset to the right bank. */
 	if (kind < 0) {
 		if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) {
-			dev_dbg(dev, "Detection failed at step 1\n");
-			goto error1;
+			return -ENODEV;
 		}
 		val1 = w83791d_read(client, W83791D_REG_BANK);
 		val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
@@ -1052,15 +999,13 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
 			/* yes it is Bank0 */
 			if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
 			    ((val1 & 0x80) && (val2 != 0x5c))) {
-				dev_dbg(dev, "Detection failed at step 2\n");
-				goto error1;
+				return -ENODEV;
 			}
 		}
 		/* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
 		   should match */
 		if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) {
-			dev_dbg(dev, "Detection failed at step 3\n");
-			goto error1;
+			return -ENODEV;
 		}
 	}
 
@@ -1075,30 +1020,33 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
 		/* get vendor ID */
 		val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
 		if (val2 != 0x5c) {	/* the vendor is NOT Winbond */
-			dev_dbg(dev, "Detection failed at step 4\n");
-			goto error1;
+			return -ENODEV;
 		}
 		val1 = w83791d_read(client, W83791D_REG_WCHIPID);
 		if (val1 == 0x71) {
 			kind = w83791d;
 		} else {
 			if (kind == 0)
-				dev_warn(dev,
+				dev_warn(&adapter->dev,
 					"w83791d: Ignoring 'force' parameter "
 					"for unknown chip at adapter %d, "
 					"address 0x%02x\n",
 					i2c_adapter_id(adapter), address);
-			goto error1;
+			return -ENODEV;
 		}
 	}
 
-	if (kind == w83791d) {
-		client_name = "w83791d";
-	} else {
-		dev_err(dev, "w83791d: Internal error: unknown kind (%d)?!?\n",
-			kind);
-		goto error1;
-	}
+	strlcpy(info->type, "w83791d", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int w83791d_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct w83791d_data *data;
+	struct device *dev = &client->dev;
+	int i, val1, err;
 
 #ifdef DEBUG
 	val1 = w83791d_read(client, W83791D_REG_DID_VID4);
@@ -1106,15 +1054,18 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
 			(val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
 #endif
 
-	/* Fill in the remaining client fields and put into the global list */
-	strlcpy(client->name, client_name, I2C_NAME_SIZE);
+	data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto error0;
+	}
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto error1;
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
 
-	if ((err = w83791d_detect_subclients(adapter, address, kind, client)))
-		goto error2;
+	err = w83791d_detect_subclients(client);
+	if (err)
+		goto error1;
 
 	/* Initialize the chip */
 	w83791d_init_client(client);
@@ -1141,43 +1092,29 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
 error4:
 	sysfs_remove_group(&client->dev.kobj, &w83791d_group);
 error3:
-	if (data->lm75[0] != NULL) {
-		i2c_detach_client(data->lm75[0]);
-		kfree(data->lm75[0]);
-	}
-	if (data->lm75[1] != NULL) {
-		i2c_detach_client(data->lm75[1]);
-		kfree(data->lm75[1]);
-	}
-error2:
-	i2c_detach_client(client);
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
+	if (data->lm75[1] != NULL)
+		i2c_unregister_device(data->lm75[1]);
 error1:
 	kfree(data);
 error0:
 	return err;
 }
 
-static int w83791d_detach_client(struct i2c_client *client)
+static int w83791d_remove(struct i2c_client *client)
 {
 	struct w83791d_data *data = i2c_get_clientdata(client);
-	int err;
-
-	/* main client */
-	if (data) {
-		hwmon_device_unregister(data->hwmon_dev);
-		sysfs_remove_group(&client->dev.kobj, &w83791d_group);
-	}
 
-	if ((err = i2c_detach_client(client)))
-		return err;
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &w83791d_group);
 
-	/* main client */
-	if (data)
-		kfree(data);
-	/* subclient */
-	else
-		kfree(client);
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
+	if (data->lm75[1] != NULL)
+		i2c_unregister_device(data->lm75[1]);
 
+	kfree(data);
 	return 0;
 }
 
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 299629d47ed..cf94c5b0c87 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -267,9 +267,7 @@ DIV_TO_REG(long val)
 }
 
 struct w83792d_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
-	enum chips type;
 
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
@@ -299,9 +297,11 @@ struct w83792d_data {
 	u8 sf2_levels[3][4];	/* Smart FanII: Fan1,2,3 duty cycle levels */
 };
 
-static int w83792d_attach_adapter(struct i2c_adapter *adapter);
-static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83792d_detach_client(struct i2c_client *client);
+static int w83792d_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int w83792d_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info);
+static int w83792d_remove(struct i2c_client *client);
 static struct w83792d_data *w83792d_update_device(struct device *dev);
 
 #ifdef DEBUG
@@ -310,12 +310,22 @@ static void w83792d_print_debug(struct w83792d_data *data, struct device *dev);
 
 static void w83792d_init_client(struct i2c_client *client);
 
+static const struct i2c_device_id w83792d_id[] = {
+	{ "w83792d", w83792d },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, w83792d_id);
+
 static struct i2c_driver w83792d_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name = "w83792d",
 	},
-	.attach_adapter = w83792d_attach_adapter,
-	.detach_client = w83792d_detach_client,
+	.probe		= w83792d_probe,
+	.remove		= w83792d_remove,
+	.id_table	= w83792d_id,
+	.detect		= w83792d_detect,
+	.address_data	= &addr_data,
 };
 
 static inline long in_count_from_reg(int nr, struct w83792d_data *data)
@@ -864,53 +874,14 @@ store_sf2_level(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-/* This function is called when:
-     * w83792d_driver is inserted (when this module is loaded), for each
-       available adapter
-     * when a new adapter is inserted (and w83792d_driver is still present) */
-static int
-w83792d_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, w83792d_detect);
-}
-
-
-static int
-w83792d_create_subclient(struct i2c_adapter *adapter,
-				struct i2c_client *new_client, int addr,
-				struct i2c_client **sub_cli)
-{
-	int err;
-	struct i2c_client *sub_client;
-
-	(*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (!(sub_client)) {
-		return -ENOMEM;
-	}
-	sub_client->addr = 0x48 + addr;
-	i2c_set_clientdata(sub_client, NULL);
-	sub_client->adapter = adapter;
-	sub_client->driver = &w83792d_driver;
-	sub_client->flags = 0;
-	strlcpy(sub_client->name, "w83792d subclient", I2C_NAME_SIZE);
-	if ((err = i2c_attach_client(sub_client))) {
-		dev_err(&new_client->dev, "subclient registration "
-			"at address 0x%x failed\n", sub_client->addr);
-		kfree(sub_client);
-		return err;
-	}
-	return 0;
-}
-
 
 static int
-w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
-		struct i2c_client *new_client)
+w83792d_detect_subclients(struct i2c_client *new_client)
 {
 	int i, id, err;
+	int address = new_client->addr;
 	u8 val;
+	struct i2c_adapter *adapter = new_client->adapter;
 	struct w83792d_data *data = i2c_get_clientdata(new_client);
 
 	id = i2c_adapter_id(adapter);
@@ -932,10 +903,7 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
 
 	val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR);
 	if (!(val & 0x08)) {
-		err = w83792d_create_subclient(adapter, new_client, val & 0x7,
-						&data->lm75[0]);
-		if (err < 0)
-			goto ERROR_SC_0;
+		data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7));
 	}
 	if (!(val & 0x80)) {
 		if ((data->lm75[0] != NULL) &&
@@ -945,10 +913,8 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
 			err = -ENODEV;
 			goto ERROR_SC_1;
 		}
-		err = w83792d_create_subclient(adapter, new_client,
-						(val >> 4) & 0x7, &data->lm75[1]);
-		if (err < 0)
-			goto ERROR_SC_1;
+		data->lm75[1] = i2c_new_dummy(adapter,
+					      0x48 + ((val >> 4) & 0x7));
 	}
 
 	return 0;
@@ -956,10 +922,8 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
 /* Undo inits in case of errors */
 
 ERROR_SC_1:
-	if (data->lm75[0] != NULL) {
-		i2c_detach_client(data->lm75[0]);
-		kfree(data->lm75[0]);
-	}
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
 ERROR_SC_0:
 	return err;
 }
@@ -1294,47 +1258,25 @@ static const struct attribute_group w83792d_group = {
 	.attrs = w83792d_attributes,
 };
 
+/* Return 0 if detection is successful, -ENODEV otherwise */
 static int
-w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
+w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info)
 {
-	int i = 0, val1 = 0, val2;
-	struct i2c_client *client;
-	struct device *dev;
-	struct w83792d_data *data;
-	int err = 0;
-	const char *client_name = "";
+	struct i2c_adapter *adapter = client->adapter;
+	int val1, val2;
+	unsigned short address = client->addr;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		goto ERROR0;
-	}
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access w83792d_{read,write}_value. */
-
-	if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto ERROR0;
+		return -ENODEV;
 	}
 
-	client = &data->client;
-	dev = &client->dev;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &w83792d_driver;
-	client->flags = 0;
-
-	/* Now, we do the remaining detection. */
-
 	/* The w83792d may be stuck in some other bank than bank 0. This may
 	   make reading other information impossible. Specify a force=... or
 	   force_*=... parameter, and the Winbond will be reset to the right
 	   bank. */
 	if (kind < 0) {
 		if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
-			dev_dbg(dev, "Detection failed at step 1\n");
-			goto ERROR1;
+			return -ENODEV;
 		}
 		val1 = w83792d_read_value(client, W83792D_REG_BANK);
 		val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
@@ -1342,16 +1284,14 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
 		if (!(val1 & 0x07)) {  /* is Bank0 */
 			if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
 			     ((val1 & 0x80) && (val2 != 0x5c))) {
-				dev_dbg(dev, "Detection failed at step 2\n");
-				goto ERROR1;
+				return -ENODEV;
 			}
 		}
 		/* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
 		   should match */
 		if (w83792d_read_value(client,
 					W83792D_REG_I2C_ADDR) != address) {
-			dev_dbg(dev, "Detection failed at step 3\n");
-			goto ERROR1;
+			return -ENODEV;
 		}
 	}
 
@@ -1367,45 +1307,48 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
 		/* get vendor ID */
 		val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
 		if (val2 != 0x5c) {  /* the vendor is NOT Winbond */
-			goto ERROR1;
+			return -ENODEV;
 		}
 		val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
 		if (val1 == 0x7a) {
 			kind = w83792d;
 		} else {
 			if (kind == 0)
-					dev_warn(dev,
+				dev_warn(&adapter->dev,
 					"w83792d: Ignoring 'force' parameter for"
 					" unknown chip at adapter %d, address"
 					" 0x%02x\n", i2c_adapter_id(adapter),
 					address);
-			goto ERROR1;
+			return -ENODEV;
 		}
 	}
 
-	if (kind == w83792d) {
-		client_name = "w83792d";
-	} else {
-		dev_err(dev, "w83792d: Internal error: unknown kind (%d)?!?\n",
-			kind);
-		goto ERROR1;
-	}
+	strlcpy(info->type, "w83792d", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int
+w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct w83792d_data *data;
+	struct device *dev = &client->dev;
+	int i, val1, err;
 
-	/* Fill in the remaining client fields and put into the global list */
-	strlcpy(client->name, client_name, I2C_NAME_SIZE);
-	data->type = kind;
+	data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto ERROR0;
+	}
 
+	i2c_set_clientdata(client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
+	err = w83792d_detect_subclients(client);
+	if (err)
 		goto ERROR1;
 
-	if ((err = w83792d_detect_subclients(adapter, address,
-			kind, client)))
-		goto ERROR2;
-
 	/* Initialize the chip */
 	w83792d_init_client(client);
 
@@ -1457,16 +1400,10 @@ exit_remove_files:
 	for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
 		sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]);
 ERROR3:
-	if (data->lm75[0] != NULL) {
-		i2c_detach_client(data->lm75[0]);
-		kfree(data->lm75[0]);
-	}
-	if (data->lm75[1] != NULL) {
-		i2c_detach_client(data->lm75[1]);
-		kfree(data->lm75[1]);
-	}
-ERROR2:
-	i2c_detach_client(client);
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
+	if (data->lm75[1] != NULL)
+		i2c_unregister_device(data->lm75[1]);
 ERROR1:
 	kfree(data);
 ERROR0:
@@ -1474,30 +1411,23 @@ ERROR0:
 }
 
 static int
-w83792d_detach_client(struct i2c_client *client)
+w83792d_remove(struct i2c_client *client)
 {
 	struct w83792d_data *data = i2c_get_clientdata(client);
-	int err, i;
-
-	/* main client */
-	if (data) {
-		hwmon_device_unregister(data->hwmon_dev);
-		sysfs_remove_group(&client->dev.kobj, &w83792d_group);
-		for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
-			sysfs_remove_group(&client->dev.kobj,
-					   &w83792d_group_fan[i]);
-	}
+	int i;
 
-	if ((err = i2c_detach_client(client)))
-		return err;
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &w83792d_group);
+	for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
+		sysfs_remove_group(&client->dev.kobj,
+				   &w83792d_group_fan[i]);
 
-	/* main client */
-	if (data)
-		kfree(data);
-	/* subclient */
-	else
-		kfree(client);
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
+	if (data->lm75[1] != NULL)
+		i2c_unregister_device(data->lm75[1]);
 
+	kfree(data);
 	return 0;
 }
 
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index ed3c019b78c..0a739f1c69b 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -179,7 +179,6 @@ static inline s8 TEMP_TO_REG(long val, s8 min, s8 max)
 }
 
 struct w83793_data {
-	struct i2c_client client;
 	struct i2c_client *lm75[2];
 	struct device *hwmon_dev;
 	struct mutex update_lock;
@@ -226,19 +225,31 @@ struct w83793_data {
 
 static u8 w83793_read_value(struct i2c_client *client, u16 reg);
 static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value);
-static int w83793_attach_adapter(struct i2c_adapter *adapter);
-static int w83793_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83793_detach_client(struct i2c_client *client);
+static int w83793_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int w83793_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int w83793_remove(struct i2c_client *client);
 static void w83793_init_client(struct i2c_client *client);
 static void w83793_update_nonvolatile(struct device *dev);
 static struct w83793_data *w83793_update_device(struct device *dev);
 
+static const struct i2c_device_id w83793_id[] = {
+	{ "w83793", w83793 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, w83793_id);
+
 static struct i2c_driver w83793_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		   .name = "w83793",
 	},
-	.attach_adapter = w83793_attach_adapter,
-	.detach_client = w83793_detach_client,
+	.probe		= w83793_probe,
+	.remove		= w83793_remove,
+	.id_table	= w83793_id,
+	.detect		= w83793_detect,
+	.address_data	= &addr_data,
 };
 
 static ssize_t
@@ -1053,89 +1064,51 @@ static void w83793_init_client(struct i2c_client *client)
 
 }
 
-static int w83793_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, w83793_detect);
-}
-
-static int w83793_detach_client(struct i2c_client *client)
+static int w83793_remove(struct i2c_client *client)
 {
 	struct w83793_data *data = i2c_get_clientdata(client);
 	struct device *dev = &client->dev;
-	int err, i;
+	int i;
 
-	/* main client */
-	if (data) {
-		hwmon_device_unregister(data->hwmon_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 
-		for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
-			device_remove_file(dev,
-					   &w83793_sensor_attr_2[i].dev_attr);
+	for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
+		device_remove_file(dev,
+				   &w83793_sensor_attr_2[i].dev_attr);
 
-		for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
-			device_remove_file(dev, &sda_single_files[i].dev_attr);
+	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+		device_remove_file(dev, &sda_single_files[i].dev_attr);
 
-		for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
-			device_remove_file(dev, &w83793_vid[i].dev_attr);
-		device_remove_file(dev, &dev_attr_vrm);
+	for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
+		device_remove_file(dev, &w83793_vid[i].dev_attr);
+	device_remove_file(dev, &dev_attr_vrm);
 
-		for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
-			device_remove_file(dev, &w83793_left_fan[i].dev_attr);
+	for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
+		device_remove_file(dev, &w83793_left_fan[i].dev_attr);
 
-		for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
-			device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+	for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
+		device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
 
-		for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
-			device_remove_file(dev, &w83793_temp[i].dev_attr);
-	}
+	for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
+		device_remove_file(dev, &w83793_temp[i].dev_attr);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
+	if (data->lm75[1] != NULL)
+		i2c_unregister_device(data->lm75[1]);
 
-	/* main client */
-	if (data)
-		kfree(data);
-	/* subclient */
-	else
-		kfree(client);
+	kfree(data);
 
 	return 0;
 }
 
 static int
-w83793_create_subclient(struct i2c_adapter *adapter,
-			struct i2c_client *client, int addr,
-			struct i2c_client **sub_cli)
-{
-	int err = 0;
-	struct i2c_client *sub_client;
-
-	(*sub_cli) = sub_client =
-	    kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (!(sub_client)) {
-		return -ENOMEM;
-	}
-	sub_client->addr = 0x48 + addr;
-	i2c_set_clientdata(sub_client, NULL);
-	sub_client->adapter = adapter;
-	sub_client->driver = &w83793_driver;
-	strlcpy(sub_client->name, "w83793 subclient", I2C_NAME_SIZE);
-	if ((err = i2c_attach_client(sub_client))) {
-		dev_err(&client->dev, "subclient registration "
-			"at address 0x%x failed\n", sub_client->addr);
-		kfree(sub_client);
-	}
-	return err;
-}
-
-static int
-w83793_detect_subclients(struct i2c_adapter *adapter, int address,
-			 int kind, struct i2c_client *client)
+w83793_detect_subclients(struct i2c_client *client)
 {
 	int i, id, err;
+	int address = client->addr;
 	u8 tmp;
+	struct i2c_adapter *adapter = client->adapter;
 	struct w83793_data *data = i2c_get_clientdata(client);
 
 	id = i2c_adapter_id(adapter);
@@ -1158,11 +1131,7 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address,
 
 	tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
 	if (!(tmp & 0x08)) {
-		err =
-		    w83793_create_subclient(adapter, client, tmp & 0x7,
-					    &data->lm75[0]);
-		if (err < 0)
-			goto ERROR_SC_0;
+		data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (tmp & 0x7));
 	}
 	if (!(tmp & 0x80)) {
 		if ((data->lm75[0] != NULL)
@@ -1173,10 +1142,8 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address,
 			err = -ENODEV;
 			goto ERROR_SC_1;
 		}
-		err = w83793_create_subclient(adapter, client,
-					      (tmp >> 4) & 0x7, &data->lm75[1]);
-		if (err < 0)
-			goto ERROR_SC_1;
+		data->lm75[1] = i2c_new_dummy(adapter,
+					      0x48 + ((tmp >> 4) & 0x7));
 	}
 
 	return 0;
@@ -1184,69 +1151,44 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address,
 	/* Undo inits in case of errors */
 
 ERROR_SC_1:
-	if (data->lm75[0] != NULL) {
-		i2c_detach_client(data->lm75[0]);
-		kfree(data->lm75[0]);
-	}
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
 ERROR_SC_0:
 	return err;
 }
 
-static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83793_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
 {
-	int i;
-	u8 tmp, val;
-	struct i2c_client *client;
-	struct device *dev;
-	struct w83793_data *data;
-	int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
-	int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
-	int files_temp = ARRAY_SIZE(w83793_temp) / 6;
-	int err = 0;
+	u8 tmp, bank;
+	struct i2c_adapter *adapter = client->adapter;
+	unsigned short address = client->addr;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		goto exit;
+		return -ENODEV;
 	}
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access w83793_{read,write}_value. */
-
-	if (!(data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	dev = &client->dev;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &w83793_driver;
+	bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
 
-	data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
-
-	/* Now, we do the remaining detection. */
 	if (kind < 0) {
-		tmp = data->bank & 0x80 ? 0x5c : 0xa3;
+		tmp = bank & 0x80 ? 0x5c : 0xa3;
 		/* Check Winbond vendor ID */
 		if (tmp != i2c_smbus_read_byte_data(client,
 							W83793_REG_VENDORID)) {
 			pr_debug("w83793: Detection failed at check "
 				 "vendor id\n");
-			err = -ENODEV;
-			goto free_mem;
+			return -ENODEV;
 		}
 
 		/* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
 		   should match */
-		if ((data->bank & 0x07) == 0
+		if ((bank & 0x07) == 0
 		 && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
 		    (address << 1)) {
 			pr_debug("w83793: Detection failed at check "
 				 "i2c addr\n");
-			err = -ENODEV;
-			goto free_mem;
+			return -ENODEV;
 		}
 
 	}
@@ -1255,30 +1197,47 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
 	   Winbond. Determine the chip type now */
 
 	if (kind <= 0) {
-		if (0x7b == w83793_read_value(client, W83793_REG_CHIPID)) {
+		if (0x7b == i2c_smbus_read_byte_data(client,
+						     W83793_REG_CHIPID)) {
 			kind = w83793;
 		} else {
 			if (kind == 0)
 				dev_warn(&adapter->dev, "w83793: Ignoring "
 					 "'force' parameter for unknown chip "
 					 "at address 0x%02x\n", address);
-			err = -ENODEV;
-			goto free_mem;
+			return -ENODEV;
 		}
 	}
 
-	/* Fill in the remaining client fields and put into the global list */
-	strlcpy(client->name, "w83793", I2C_NAME_SIZE);
+	strlcpy(info->type, "w83793", I2C_NAME_SIZE);
+
+	return 0;
+}
 
+static int w83793_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct w83793_data *data;
+	int i, tmp, val, err;
+	int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
+	int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
+	int files_temp = ARRAY_SIZE(w83793_temp) / 6;
+
+	data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
+	err = w83793_detect_subclients(client);
+	if (err)
 		goto free_mem;
 
-	if ((err = w83793_detect_subclients(adapter, address, kind, client)))
-		goto detach_client;
-
 	/* Initialize the chip */
 	w83793_init_client(client);
 
@@ -1459,16 +1418,10 @@ exit_remove:
 	for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
 		device_remove_file(dev, &w83793_temp[i].dev_attr);
 
-	if (data->lm75[0] != NULL) {
-		i2c_detach_client(data->lm75[0]);
-		kfree(data->lm75[0]);
-	}
-	if (data->lm75[1] != NULL) {
-		i2c_detach_client(data->lm75[1]);
-		kfree(data->lm75[1]);
-	}
-detach_client:
-	i2c_detach_client(client);
+	if (data->lm75[0] != NULL)
+		i2c_unregister_device(data->lm75[0]);
+	if (data->lm75[1] != NULL)
+		i2c_unregister_device(data->lm75[1]);
 free_mem:
 	kfree(data);
 exit:
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 52e268e25da..ea295b9fc4f 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -81,10 +81,11 @@ I2C_CLIENT_INSMOD_1(w83l785ts);
  * Functions declaration
  */
 
-static int w83l785ts_attach_adapter(struct i2c_adapter *adapter);
-static int w83l785ts_detect(struct i2c_adapter *adapter, int address,
-	int kind);
-static int w83l785ts_detach_client(struct i2c_client *client);
+static int w83l785ts_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id);
+static int w83l785ts_detect(struct i2c_client *client, int kind,
+			    struct i2c_board_info *info);
+static int w83l785ts_remove(struct i2c_client *client);
 static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval);
 static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
 
@@ -92,12 +93,22 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
  * Driver data (common to all clients)
  */
  
+static const struct i2c_device_id w83l785ts_id[] = {
+	{ "w83l785ts", w83l785ts },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, w83l785ts_id);
+
 static struct i2c_driver w83l785ts_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "w83l785ts",
 	},
-	.attach_adapter	= w83l785ts_attach_adapter,
-	.detach_client	= w83l785ts_detach_client,
+	.probe		= w83l785ts_probe,
+	.remove		= w83l785ts_remove,
+	.id_table	= w83l785ts_id,
+	.detect		= w83l785ts_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -105,7 +116,6 @@ static struct i2c_driver w83l785ts_driver = {
  */
 
 struct w83l785ts_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
@@ -135,40 +145,14 @@ static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1);
  * Real code
  */
 
-static int w83l785ts_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, w83l785ts_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83l785ts_detect(struct i2c_client *new_client, int kind,
+			    struct i2c_board_info *info)
 {
-	struct i2c_client *new_client;
-	struct w83l785ts_data *data;
-	int err = 0;
-
+	struct i2c_adapter *adapter = new_client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	/* The common I2C client data is placed right before the
-	 * W83L785TS-specific data. */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &w83l785ts_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/*
 	 * Now we do the remaining detection. A negative kind means that
@@ -188,8 +172,8 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
 		      W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
 			dev_dbg(&adapter->dev,
 				"W83L785TS-S detection failed at 0x%02x.\n",
-				address);
-			goto exit_free;
+				new_client->addr);
+			return -ENODEV;
 		}
 	}
 
@@ -214,22 +198,34 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
 			dev_info(&adapter->dev,
 				 "Unsupported chip (man_id=0x%04X, "
 				 "chip_id=0x%02X).\n", man_id, chip_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
-	/* We can fill in the remaining client fields. */
-	strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE);
+	strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int w83l785ts_probe(struct i2c_client *new_client,
+			   const struct i2c_device_id *id)
+{
+	struct w83l785ts_data *data;
+	int err = 0;
+
+	data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
 	/* Default values in case the first read fails (unlikely). */
 	data->temp[1] = data->temp[0] = 0;
 
-	/* Tell the I2C layer a new client has arrived. */
-	if ((err = i2c_attach_client(new_client))) 
-		goto exit_free;
-
 	/*
 	 * Initialize the W83L785TS chip
 	 * Nothing yet, assume it is already started.
@@ -259,25 +255,20 @@ exit_remove:
 			   &sensor_dev_attr_temp1_input.dev_attr);
 	device_remove_file(&new_client->dev,
 			   &sensor_dev_attr_temp1_max.dev_attr);
-	i2c_detach_client(new_client);
-exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int w83l785ts_detach_client(struct i2c_client *client)
+static int w83l785ts_remove(struct i2c_client *client)
 {
 	struct w83l785ts_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	device_remove_file(&client->dev,
 			   &sensor_dev_attr_temp1_input.dev_attr);
 	device_remove_file(&client->dev,
 			   &sensor_dev_attr_temp1_max.dev_attr);
-	if ((err = i2c_detach_client(client)))
-		return err;
 
 	kfree(data);
 	return 0;
@@ -286,6 +277,18 @@ static int w83l785ts_detach_client(struct i2c_client *client)
 static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
 {
 	int value, i;
+	struct device *dev;
+	const char *prefix;
+
+	/* We might be called during detection, at which point the client
+	   isn't yet fully initialized, so we can't use dev_dbg on it */
+	if (i2c_get_clientdata(client)) {
+		dev = &client->dev;
+		prefix = "";
+	} else {
+		dev = &client->adapter->dev;
+		prefix = "w83l785ts: ";
+	}
 
 	/* Frequent read errors have been reported on Asus boards, so we
 	 * retry on read errors. If it still fails (unlikely), return the
@@ -293,15 +296,15 @@ static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
 	for (i = 1; i <= MAX_RETRIES; i++) {
 		value = i2c_smbus_read_byte_data(client, reg);
 		if (value >= 0) {
-			dev_dbg(&client->dev, "Read 0x%02x from register "
-				"0x%02x.\n", value, reg);
+			dev_dbg(dev, "%sRead 0x%02x from register 0x%02x.\n",
+				prefix, value, reg);
 			return value;
 		}
-		dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i);
+		dev_dbg(dev, "%sRead failed, will retry in %d.\n", prefix, i);
 		msleep(i);
 	}
 
-	dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n",
+	dev_err(dev, "%sCouldn't read value from register 0x%02x.\n", prefix,
 		reg);
 	return defval;
 }
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index 41e22ddb568..badca769f35 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -121,7 +121,6 @@ DIV_TO_REG(long val)
 }
 
 struct w83l786ng_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;			/* !=0 if following fields are valid */
@@ -146,18 +145,30 @@ struct w83l786ng_data {
 	u8 tolerance[2];
 };
 
-static int w83l786ng_attach_adapter(struct i2c_adapter *adapter);
-static int w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83l786ng_detach_client(struct i2c_client *client);
+static int w83l786ng_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id);
+static int w83l786ng_detect(struct i2c_client *client, int kind,
+			    struct i2c_board_info *info);
+static int w83l786ng_remove(struct i2c_client *client);
 static void w83l786ng_init_client(struct i2c_client *client);
 static struct w83l786ng_data *w83l786ng_update_device(struct device *dev);
 
+static const struct i2c_device_id w83l786ng_id[] = {
+	{ "w83l786ng", w83l786ng },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, w83l786ng_id);
+
 static struct i2c_driver w83l786ng_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		   .name = "w83l786ng",
 	},
-	.attach_adapter = w83l786ng_attach_adapter,
-	.detach_client = w83l786ng_detach_client,
+	.probe		= w83l786ng_probe,
+	.remove		= w83l786ng_remove,
+	.id_table	= w83l786ng_id,
+	.detect		= w83l786ng_detect,
+	.address_data	= &addr_data,
 };
 
 static u8
@@ -575,42 +586,15 @@ static const struct attribute_group w83l786ng_group = {
 };
 
 static int
-w83l786ng_attach_adapter(struct i2c_adapter *adapter)
+w83l786ng_detect(struct i2c_client *client, int kind,
+		 struct i2c_board_info *info)
 {
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, w83l786ng_detect);
-}
-
-static int
-w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *client;
-	struct device *dev;
-	struct w83l786ng_data *data;
-	int i, err = 0;
-	u8 reg_tmp;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		goto exit;
-	}
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access w83l786ng_{read,write}_value. */
-
-	if (!(data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
+		return -ENODEV;
 	}
 
-	client = &data->client;
-	dev = &client->dev;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &w83l786ng_driver;
-
 	/*
 	 * Now we do the remaining detection. A negative kind means that
 	 * the driver was loaded with no force parameter (default), so we
@@ -627,8 +611,8 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind)
 		    W83L786NG_REG_CONFIG) & 0x80) != 0x00)) {
 			dev_dbg(&adapter->dev,
 				"W83L786NG detection failed at 0x%02x.\n",
-				address);
-			goto exit_free;
+				client->addr);
+			return -ENODEV;
 		}
 	}
 
@@ -651,17 +635,31 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind)
 			dev_info(&adapter->dev,
 			    "Unsupported chip (man_id=0x%04X, "
 			    "chip_id=0x%02X).\n", man_id, chip_id);
-			goto exit_free;
+			return -ENODEV;
 		}
 	}
 
-	/* Fill in the remaining client fields and put into the global list */
-	strlcpy(client->name, "w83l786ng", I2C_NAME_SIZE);
-	mutex_init(&data->update_lock);
+	strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
+	return 0;
+}
+
+static int
+w83l786ng_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct w83l786ng_data *data;
+	int i, err = 0;
+	u8 reg_tmp;
+
+	data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
 
 	/* Initialize the chip */
 	w83l786ng_init_client(client);
@@ -693,25 +691,19 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind)
 
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &w83l786ng_group);
-	i2c_detach_client(client);
-exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
 static int
-w83l786ng_detach_client(struct i2c_client *client)
+w83l786ng_remove(struct i2c_client *client)
 {
 	struct w83l786ng_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &w83l786ng_group);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 2f150e33c74..72872d1e63e 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -155,6 +155,16 @@ static int __init amd756_s4882_init(void)
 	int i, error;
 	union i2c_smbus_data ioconfig;
 
+	/* Configure the PCA9556 multiplexer */
+	ioconfig.byte = 0x00; /* All I/O to output mode */
+	error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
+			       I2C_SMBUS_BYTE_DATA, &ioconfig);
+	if (error) {
+		dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n");
+		error = -EIO;
+		goto ERROR0;
+	}
+
 	/* Unregister physical bus */
 	error = i2c_del_adapter(&amd756_smbus);
 	if (error) {
@@ -198,22 +208,11 @@ static int __init amd756_s4882_init(void)
 	s4882_algo[3].smbus_xfer = amd756_access_virt3;
 	s4882_algo[4].smbus_xfer = amd756_access_virt4;
 
-	/* Configure the PCA9556 multiplexer */
-	ioconfig.byte = 0x00; /* All I/O to output mode */
-	error = amd756_smbus.algo->smbus_xfer(&amd756_smbus, 0x18, 0,
-					      I2C_SMBUS_WRITE, 0x03,
-					      I2C_SMBUS_BYTE_DATA, &ioconfig);
-	if (error) {
-		dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n");
-		error = -EIO;
-		goto ERROR3;
-	}
-
 	/* Register virtual adapters */
 	for (i = 0; i < 5; i++) {
 		error = i2c_add_adapter(s4882_adapter+i);
 		if (error) {
-			dev_err(&amd756_smbus.dev,
+			printk(KERN_ERR "i2c-amd756-s4882: "
 			       "Virtual adapter %d registration "
 			       "failed, module not inserted\n", i);
 			for (i--; i >= 0; i--)
@@ -252,8 +251,8 @@ static void __exit amd756_s4882_exit(void)
 
 	/* Restore physical bus */
 	if (i2c_add_adapter(&amd756_smbus))
-		dev_err(&amd756_smbus.dev, "Physical bus restoration "
-			"failed\n");
+		printk(KERN_ERR "i2c-amd756-s4882: "
+		       "Physical bus restoration failed\n");
 }
 
 MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index 6a8995dfd0b..d1a4cbcf2aa 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -150,6 +150,16 @@ static int __init nforce2_s4985_init(void)
 	int i, error;
 	union i2c_smbus_data ioconfig;
 
+	/* Configure the PCA9556 multiplexer */
+	ioconfig.byte = 0x00; /* All I/O to output mode */
+	error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
+			       I2C_SMBUS_BYTE_DATA, &ioconfig);
+	if (error) {
+		dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
+		error = -EIO;
+		goto ERROR0;
+	}
+
 	/* Unregister physical bus */
 	if (!nforce2_smbus)
 		return -ENODEV;
@@ -191,24 +201,13 @@ static int __init nforce2_s4985_init(void)
 	s4985_algo[3].smbus_xfer = nforce2_access_virt3;
 	s4985_algo[4].smbus_xfer = nforce2_access_virt4;
 
-	/* Configure the PCA9556 multiplexer */
-	ioconfig.byte = 0x00; /* All I/O to output mode */
-	error = nforce2_smbus->algo->smbus_xfer(nforce2_smbus, 0x18, 0,
-						I2C_SMBUS_WRITE, 0x03,
-						I2C_SMBUS_BYTE_DATA, &ioconfig);
-	if (error) {
-		dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
-		error = -EIO;
-		goto ERROR3;
-	}
-
 	/* Register virtual adapters */
 	for (i = 0; i < 5; i++) {
 		error = i2c_add_adapter(s4985_adapter + i);
 		if (error) {
-			dev_err(&nforce2_smbus->dev,
-				"Virtual adapter %d registration "
-				"failed, module not inserted\n", i);
+			printk(KERN_ERR "i2c-nforce2-s4985: "
+			       "Virtual adapter %d registration "
+			       "failed, module not inserted\n", i);
 			for (i--; i >= 0; i--)
 				i2c_del_adapter(s4985_adapter + i);
 			goto ERROR3;
@@ -245,8 +244,8 @@ static void __exit nforce2_s4985_exit(void)
 
 	/* Restore physical bus */
 	if (i2c_add_adapter(nforce2_smbus))
-		dev_err(&nforce2_smbus->dev, "Physical bus restoration "
-			"failed\n");
+		printk(KERN_ERR "i2c-nforce2-s4985: "
+		       "Physical bus restoration failed\n");
 }
 
 MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index 373ea8d8fe8..2c27193aeaa 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -47,7 +47,6 @@ enum eeprom_nature {
 
 /* Each client has this additional data */
 struct eeprom_data {
-	struct i2c_client client;
 	struct mutex update_lock;
 	u8 valid;			/* bitfield, bit!=0 if slice is valid */
 	unsigned long last_updated[8];	/* In jiffies, 8 slices */
@@ -56,19 +55,6 @@ struct eeprom_data {
 };
 
 
-static int eeprom_attach_adapter(struct i2c_adapter *adapter);
-static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
-static int eeprom_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver eeprom_driver = {
-	.driver = {
-		.name	= "eeprom",
-	},
-	.attach_adapter	= eeprom_attach_adapter,
-	.detach_client	= eeprom_detach_client,
-};
-
 static void eeprom_update_client(struct i2c_client *client, u8 slice)
 {
 	struct eeprom_data *data = i2c_get_clientdata(client);
@@ -148,25 +134,17 @@ static struct bin_attribute eeprom_attr = {
 	.read = eeprom_read,
 };
 
-static int eeprom_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & (I2C_CLASS_DDC | I2C_CLASS_SPD)))
-		return 0;
-	return i2c_probe(adapter, &addr_data, eeprom_detect);
-}
-
-/* This function is called by i2c_probe */
-static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int eeprom_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct eeprom_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
 
 	/* EDID EEPROMs are often 24C00 EEPROMs, which answer to all
 	   addresses 0x50-0x57, but we only care about 0x50. So decline
 	   attaching to addresses >= 0x51 on DDC buses */
-	if (!(adapter->class & I2C_CLASS_SPD) && address >= 0x51)
-		goto exit;
+	if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51)
+		return -ENODEV;
 
 	/* There are four ways we can read the EEPROM data:
 	   (1) I2C block reads (faster, but unsupported by most adapters)
@@ -177,32 +155,33 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 	   because all known adapters support one of the first two. */
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)
 	 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
-		goto exit;
+		return -ENODEV;
+
+	strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int eeprom_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct eeprom_data *data;
+	int err;
 
 	if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
 
-	client = &data->client;
 	memset(data->data, 0xff, EEPROM_SIZE);
 	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &eeprom_driver;
-
-	/* Fill in the remaining client fields */
-	strlcpy(client->name, "eeprom", I2C_NAME_SIZE);
 	mutex_init(&data->update_lock);
 	data->nature = UNKNOWN;
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_kfree;
-
 	/* Detect the Vaio nature of EEPROMs.
 	   We use the "PCG-" or "VGN-" prefix as the signature. */
-	if (address == 0x57
+	if (client->addr == 0x57
 	 && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
 		char name[4];
 
@@ -221,33 +200,42 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 	/* create the sysfs eeprom file */
 	err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
 	if (err)
-		goto exit_detach;
+		goto exit_kfree;
 
 	return 0;
 
-exit_detach:
-	i2c_detach_client(client);
 exit_kfree:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int eeprom_detach_client(struct i2c_client *client)
+static int eeprom_remove(struct i2c_client *client)
 {
-	int err;
-
 	sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
-
-	err = i2c_detach_client(client);
-	if (err)
-		return err;
-
 	kfree(i2c_get_clientdata(client));
 
 	return 0;
 }
 
+static const struct i2c_device_id eeprom_id[] = {
+	{ "eeprom", 0 },
+	{ }
+};
+
+static struct i2c_driver eeprom_driver = {
+	.driver = {
+		.name	= "eeprom",
+	},
+	.probe		= eeprom_probe,
+	.remove		= eeprom_remove,
+	.id_table	= eeprom_id,
+
+	.class		= I2C_CLASS_DDC | I2C_CLASS_SPD,
+	.detect		= eeprom_detect,
+	.address_data	= &addr_data,
+};
+
 static int __init eeprom_init(void)
 {
 	return i2c_add_driver(&eeprom_driver);
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 5a0285d8b6f..033d9d81ec8 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -53,7 +53,7 @@ I2C_CLIENT_INSMOD_1(max6875);
 
 /* Each client has this additional data */
 struct max6875_data {
-	struct i2c_client	client;
+	struct i2c_client	*fake_client;
 	struct mutex		update_lock;
 
 	u32			valid;
@@ -61,19 +61,6 @@ struct max6875_data {
 	unsigned long		last_updated[USER_EEPROM_SLICES];
 };
 
-static int max6875_attach_adapter(struct i2c_adapter *adapter);
-static int max6875_detect(struct i2c_adapter *adapter, int address, int kind);
-static int max6875_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver max6875_driver = {
-	.driver = {
-		.name	= "max6875",
-	},
-	.attach_adapter	= max6875_attach_adapter,
-	.detach_client	= max6875_detach_client,
-};
-
 static void max6875_update_slice(struct i2c_client *client, int slice)
 {
 	struct max6875_data *data = i2c_get_clientdata(client);
@@ -159,96 +146,87 @@ static struct bin_attribute user_eeprom_attr = {
 	.read = max6875_read,
 };
 
-static int max6875_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max6875_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	return i2c_probe(adapter, &addr_data, max6875_detect);
-}
-
-/* This function is called by i2c_probe */
-static int max6875_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *real_client;
-	struct i2c_client *fake_client;
-	struct max6875_data *data;
-	int err;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
 				     | I2C_FUNC_SMBUS_READ_BYTE))
-		return 0;
+		return -ENODEV;
 
 	/* Only check even addresses */
-	if (address & 1)
-		return 0;
+	if (client->addr & 1)
+		return -ENODEV;
+
+	strlcpy(info->type, "max6875", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int max6875_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct max6875_data *data;
+	int err;
 
 	if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
 		return -ENOMEM;
 
 	/* A fake client is created on the odd address */
-	if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+	data->fake_client = i2c_new_dummy(client->adapter, client->addr + 1);
+	if (!data->fake_client) {
 		err = -ENOMEM;
-		goto exit_kfree1;
+		goto exit_kfree;
 	}
 
 	/* Init real i2c_client */
-	real_client = &data->client;
-	i2c_set_clientdata(real_client, data);
-	real_client->addr = address;
-	real_client->adapter = adapter;
-	real_client->driver = &max6875_driver;
-	strlcpy(real_client->name, "max6875", I2C_NAME_SIZE);
+	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
-	/* Init fake client data */
-	i2c_set_clientdata(fake_client, NULL);
-	fake_client->addr = address | 1;
-	fake_client->adapter = adapter;
-	fake_client->driver = &max6875_driver;
-	strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE);
-
-	if ((err = i2c_attach_client(real_client)) != 0)
-		goto exit_kfree2;
-
-	if ((err = i2c_attach_client(fake_client)) != 0)
-		goto exit_detach1;
-
-	err = sysfs_create_bin_file(&real_client->dev.kobj, &user_eeprom_attr);
+	err = sysfs_create_bin_file(&client->dev.kobj, &user_eeprom_attr);
 	if (err)
-		goto exit_detach2;
+		goto exit_remove_fake;
 
 	return 0;
 
-exit_detach2:
-	i2c_detach_client(fake_client);
-exit_detach1:
-	i2c_detach_client(real_client);
-exit_kfree2:
-	kfree(fake_client);
-exit_kfree1:
+exit_remove_fake:
+	i2c_unregister_device(data->fake_client);
+exit_kfree:
 	kfree(data);
 	return err;
 }
 
-/* Will be called for both the real client and the fake client */
-static int max6875_detach_client(struct i2c_client *client)
+static int max6875_remove(struct i2c_client *client)
 {
-	int err;
 	struct max6875_data *data = i2c_get_clientdata(client);
 
-	/* data is NULL for the fake client */
-	if (data)
-		sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr);
+	i2c_unregister_device(data->fake_client);
 
-	err = i2c_detach_client(client);
-	if (err)
-		return err;
+	sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr);
+	kfree(data);
 
-	if (data)		/* real client */
-		kfree(data);
-	else			/* fake client */
-		kfree(client);
 	return 0;
 }
 
+static const struct i2c_device_id max6875_id[] = {
+	{ "max6875", 0 },
+	{ }
+};
+
+static struct i2c_driver max6875_driver = {
+	.driver = {
+		.name	= "max6875",
+	},
+	.probe		= max6875_probe,
+	.remove		= max6875_remove,
+	.id_table	= max6875_id,
+
+	.detect		= max6875_detect,
+	.address_data	= &addr_data,
+};
+
 static int __init max6875_init(void)
 {
 	return i2c_add_driver(&max6875_driver);
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 58ab7f26be2..270de4e56a8 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -14,8 +14,8 @@
 #include <linux/i2c.h>
 #include <linux/hwmon-sysfs.h>
 
-/* Addresses to scan */
-static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END};
+/* Addresses to scan: none, device is not autodetected */
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(pca9539);
@@ -32,23 +32,6 @@ enum pca9539_cmd
 	PCA9539_DIRECTION_1	= 7,
 };
 
-static int pca9539_attach_adapter(struct i2c_adapter *adapter);
-static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pca9539_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver pca9539_driver = {
-	.driver = {
-		.name	= "pca9539",
-	},
-	.attach_adapter	= pca9539_attach_adapter,
-	.detach_client	= pca9539_detach_client,
-};
-
-struct pca9539_data {
-	struct i2c_client client;
-};
-
 /* following are the sysfs callback functions */
 static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr,
 			    char *buf)
@@ -105,77 +88,51 @@ static struct attribute_group pca9539_defattr_group = {
 	.attrs = pca9539_attributes,
 };
 
-static int pca9539_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int pca9539_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	return i2c_probe(adapter, &addr_data, pca9539_detect);
-}
-
-/* This function is called by i2c_probe */
-static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *client;
-	struct pca9539_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet. */
-	if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &pca9539_driver;
-
-	if (kind < 0) {
-		/* Detection: the pca9539 only has 8 registers (0-7).
-		   A read of 7 should succeed, but a read of 8 should fail. */
-		if ((i2c_smbus_read_byte_data(client, 7) < 0) ||
-		    (i2c_smbus_read_byte_data(client, 8) >= 0))
-			goto exit_kfree;
-	}
-
-	strlcpy(client->name, "pca9539", I2C_NAME_SIZE);
-
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_kfree;
+		return -ENODEV;
 
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj,
-				 &pca9539_defattr_group);
-	if (err)
-		goto exit_detach;
+	strlcpy(info->type, "pca9539", I2C_NAME_SIZE);
 
 	return 0;
-
-exit_detach:
-	i2c_detach_client(client);
-exit_kfree:
-	kfree(data);
-exit:
-	return err;
 }
 
-static int pca9539_detach_client(struct i2c_client *client)
+static int pca9539_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
-	int err;
+	/* Register sysfs hooks */
+	return sysfs_create_group(&client->dev.kobj,
+				  &pca9539_defattr_group);
+}
 
+static int pca9539_remove(struct i2c_client *client)
+{
 	sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group);
-
-	if ((err = i2c_detach_client(client)))
-		return err;
-
-	kfree(i2c_get_clientdata(client));
 	return 0;
 }
 
+static const struct i2c_device_id pca9539_id[] = {
+	{ "pca9539", 0 },
+	{ }
+};
+
+static struct i2c_driver pca9539_driver = {
+	.driver = {
+		.name	= "pca9539",
+	},
+	.probe		= pca9539_probe,
+	.remove		= pca9539_remove,
+	.id_table	= pca9539_id,
+
+	.detect		= pca9539_detect,
+	.address_data	= &addr_data,
+};
+
 static int __init pca9539_init(void)
 {
 	return i2c_add_driver(&pca9539_driver);
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index 1b3db2b3ada..6ec309894c8 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -38,37 +38,19 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = {
-	0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
-	0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-	I2C_CLIENT_END
-};
+/* Addresses to scan: none, device can't be detected */
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
 
 /* Each client has this additional data */
 struct pcf8574_data {
-	struct i2c_client client;
-
 	int write;			/* Remember last written value */
 };
 
-static int pcf8574_attach_adapter(struct i2c_adapter *adapter);
-static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pcf8574_detach_client(struct i2c_client *client);
 static void pcf8574_init_client(struct i2c_client *client);
 
-/* This is the driver that will be inserted */
-static struct i2c_driver pcf8574_driver = {
-	.driver = {
-		.name	= "pcf8574",
-	},
-	.attach_adapter	= pcf8574_attach_adapter,
-	.detach_client	= pcf8574_detach_client,
-};
-
 /* following are the sysfs callback functions */
 static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -119,41 +101,22 @@ static const struct attribute_group pcf8574_attr_group = {
  * Real code
  */
 
-static int pcf8574_attach_adapter(struct i2c_adapter *adapter)
-{
-	return i2c_probe(adapter, &addr_data, pcf8574_detect);
-}
-
-/* This function is called by i2c_probe */
-static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int pcf8574_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct pcf8574_data *data;
-	int err = 0;
-	const char *client_name = "";
+	struct i2c_adapter *adapter = client->adapter;
+	const char *client_name;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet. */
-	if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &pcf8574_driver;
+		return -ENODEV;
 
 	/* Now, we would do the remaining detection. But the PCF8574 is plainly
 	   impossible to detect! Stupid chip. */
 
 	/* Determine the chip type */
 	if (kind <= 0) {
-		if (address >= 0x38 && address <= 0x3f)
+		if (client->addr >= 0x38 && client->addr <= 0x3f)
 			kind = pcf8574a;
 		else
 			kind = pcf8574;
@@ -163,40 +126,43 @@ static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
 		client_name = "pcf8574a";
 	else
 		client_name = "pcf8574";
+	strlcpy(info->type, client_name, I2C_NAME_SIZE);
 
-	/* Fill in the remaining client fields and put it into the global list */
-	strlcpy(client->name, client_name, I2C_NAME_SIZE);
+	return 0;
+}
+
+static int pcf8574_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct pcf8574_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_free;
-	
 	/* Initialize the PCF8574 chip */
 	pcf8574_init_client(client);
 
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group);
 	if (err)
-		goto exit_detach;
+		goto exit_free;
 	return 0;
 
-      exit_detach:
-	i2c_detach_client(client);
       exit_free:
 	kfree(data);
       exit:
 	return err;
 }
 
-static int pcf8574_detach_client(struct i2c_client *client)
+static int pcf8574_remove(struct i2c_client *client)
 {
-	int err;
-
 	sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group);
-
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(i2c_get_clientdata(client));
 	return 0;
 }
@@ -208,6 +174,24 @@ static void pcf8574_init_client(struct i2c_client *client)
 	data->write = -EAGAIN;
 }
 
+static const struct i2c_device_id pcf8574_id[] = {
+	{ "pcf8574", 0 },
+	{ "pcf8574a", 0 },
+	{ }
+};
+
+static struct i2c_driver pcf8574_driver = {
+	.driver = {
+		.name	= "pcf8574",
+	},
+	.probe		= pcf8574_probe,
+	.remove		= pcf8574_remove,
+	.id_table	= pcf8574_id,
+
+	.detect		= pcf8574_detect,
+	.address_data	= &addr_data,
+};
+
 static int __init pcf8574_init(void)
 {
 	return i2c_add_driver(&pcf8574_driver);
diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c
index 3ea08ac0bfa..07fd7cb3c57 100644
--- a/drivers/i2c/chips/pcf8575.c
+++ b/drivers/i2c/chips/pcf8575.c
@@ -32,11 +32,8 @@
 #include <linux/slab.h>  /* kzalloc() */
 #include <linux/sysfs.h> /* sysfs_create_group() */
 
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = {
-	0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
-	I2C_CLIENT_END
-};
+/* Addresses to scan: none, device can't be detected */
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD;
@@ -44,24 +41,9 @@ I2C_CLIENT_INSMOD;
 
 /* Each client has this additional data */
 struct pcf8575_data {
-	struct i2c_client client;
 	int write;		/* last written value, or error code */
 };
 
-static int pcf8575_attach_adapter(struct i2c_adapter *adapter);
-static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pcf8575_detach_client(struct i2c_client *client);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver pcf8575_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "pcf8575",
-	},
-	.attach_adapter	= pcf8575_attach_adapter,
-	.detach_client	= pcf8575_detach_client,
-};
-
 /* following are the sysfs callback functions */
 static ssize_t show_read(struct device *dev, struct device_attribute *attr,
 			 char *buf)
@@ -126,75 +108,77 @@ static const struct attribute_group pcf8575_attr_group = {
  * Real code
  */
 
-static int pcf8575_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int pcf8575_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	return i2c_probe(adapter, &addr_data, pcf8575_detect);
+	struct i2c_adapter *adapter = client->adapter;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	/* This is the place to detect whether the chip at the specified
+	   address really is a PCF8575 chip. However, there is no method known
+	   to detect whether an I2C chip is a PCF8575 or any other I2C chip. */
+
+	strlcpy(info->type, "pcf8575", I2C_NAME_SIZE);
+
+	return 0;
 }
 
-/* This function is called by i2c_probe */
-static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8575_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
 	struct pcf8575_data *data;
-	int err = 0;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
-		goto exit;
+	int err;
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet. */
 	data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL);
 	if (!data) {
 		err = -ENOMEM;
 		goto exit;
 	}
 
-	client = &data->client;
 	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &pcf8575_driver;
-	strlcpy(client->name, "pcf8575", I2C_NAME_SIZE);
 	data->write = -EAGAIN;
 
-	/* This is the place to detect whether the chip at the specified
-	   address really is a PCF8575 chip. However, there is no method known
-	   to detect whether an I2C chip is a PCF8575 or any other I2C chip. */
-
-	/* Tell the I2C layer a new client has arrived */
-	err = i2c_attach_client(client);
-	if (err)
-		goto exit_free;
-
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group);
 	if (err)
-		goto exit_detach;
+		goto exit_free;
 
 	return 0;
 
-exit_detach:
-	i2c_detach_client(client);
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int pcf8575_detach_client(struct i2c_client *client)
+static int pcf8575_remove(struct i2c_client *client)
 {
-	int err;
-
 	sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group);
-
-	err = i2c_detach_client(client);
-	if (err)
-		return err;
-
 	kfree(i2c_get_clientdata(client));
 	return 0;
 }
 
+static const struct i2c_device_id pcf8575_id[] = {
+	{ "pcf8575", 0 },
+	{ }
+};
+
+static struct i2c_driver pcf8575_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "pcf8575",
+	},
+	.probe		= pcf8575_probe,
+	.remove		= pcf8575_remove,
+	.id_table	= pcf8575_id,
+
+	.detect		= pcf8575_detect,
+	.address_data	= &addr_data,
+};
+
 static int __init pcf8575_init(void)
 {
 	return i2c_add_driver(&pcf8575_driver);
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index db735379f22..16ce3e19377 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -72,28 +72,15 @@ MODULE_PARM_DESC(input_mode,
 #define REG_TO_SIGNED(reg)	(((reg) & 0x80)?((reg) - 256):(reg))
 
 struct pcf8591_data {
-	struct i2c_client client;
 	struct mutex update_lock;
 
 	u8 control;
 	u8 aout;
 };
 
-static int pcf8591_attach_adapter(struct i2c_adapter *adapter);
-static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind);
-static int pcf8591_detach_client(struct i2c_client *client);
 static void pcf8591_init_client(struct i2c_client *client);
 static int pcf8591_read_channel(struct device *dev, int channel);
 
-/* This is the driver that will be inserted */
-static struct i2c_driver pcf8591_driver = {
-	.driver = {
-		.name	= "pcf8591",
-	},
-	.attach_adapter	= pcf8591_attach_adapter,
-	.detach_client	= pcf8591_detach_client,
-};
-
 /* following are the sysfs callback functions */
 #define show_in_channel(channel)					\
 static ssize_t show_in##channel##_input(struct device *dev, struct device_attribute *attr, char *buf)	\
@@ -180,58 +167,46 @@ static const struct attribute_group pcf8591_attr_group_opt = {
 /*
  * Real code
  */
-static int pcf8591_attach_adapter(struct i2c_adapter *adapter)
-{
-	return i2c_probe(adapter, &addr_data, pcf8591_detect);
-}
 
-/* This function is called by i2c_probe */
-static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int pcf8591_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct pcf8591_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE
 				     | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
-		goto exit;
+		return -ENODEV;
+
+	/* Now, we would do the remaining detection. But the PCF8591 is plainly
+	   impossible to detect! Stupid chip. */
+
+	strlcpy(info->type, "pcf8591", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int pcf8591_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct pcf8591_data *data;
+	int err;
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet. */
 	if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
 	
-	client = &data->client;
 	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &pcf8591_driver;
-
-	/* Now, we would do the remaining detection. But the PCF8591 is plainly
-	   impossible to detect! Stupid chip. */
-
-	/* Determine the chip type - only one kind supported! */
-	if (kind <= 0)
-		kind = pcf8591;
-
-	/* Fill in the remaining client fields and put it into the global 
-	   list */
-	strlcpy(client->name, "pcf8591", I2C_NAME_SIZE);
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto exit_kfree;
-
 	/* Initialize the PCF8591 chip */
 	pcf8591_init_client(client);
 
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &pcf8591_attr_group);
 	if (err)
-		goto exit_detach;
+		goto exit_kfree;
 
 	/* Register input2 if not in "two differential inputs" mode */
 	if (input_mode != 3) {
@@ -252,24 +227,16 @@ static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
 exit_sysfs_remove:
 	sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt);
 	sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group);
-exit_detach:
-	i2c_detach_client(client);
 exit_kfree:
 	kfree(data);
 exit:
 	return err;
 }
 
-static int pcf8591_detach_client(struct i2c_client *client)
+static int pcf8591_remove(struct i2c_client *client)
 {
-	int err;
-
 	sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt);
 	sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group);
-
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(i2c_get_clientdata(client));
 	return 0;
 }
@@ -316,6 +283,25 @@ static int pcf8591_read_channel(struct device *dev, int channel)
 		return (10 * value);
 }
 
+static const struct i2c_device_id pcf8591_id[] = {
+	{ "pcf8591", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8591_id);
+
+static struct i2c_driver pcf8591_driver = {
+	.driver = {
+		.name	= "pcf8591",
+	},
+	.probe		= pcf8591_probe,
+	.remove		= pcf8591_remove,
+	.id_table	= pcf8591_id,
+
+	.class		= I2C_CLASS_HWMON,	/* Nearest choice */
+	.detect		= pcf8591_detect,
+	.address_data	= &addr_data,
+};
+
 static int __init pcf8591_init(void)
 {
 	if (input_mode < 0 || input_mode > 3) {
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0a79f766101..7608df83d6d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -654,6 +654,10 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 
 	dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
 
+	/* Clear the device structure in case this adapter is ever going to be
+	   added again */
+	memset(&adap->dev, 0, sizeof(adap->dev));
+
  out_unlock:
 	mutex_unlock(&core_lock);
 	return res;
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index 0fd5820d5c6..df52cb355f7 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -94,21 +94,31 @@ static const u8 ds2482_chan_rd[8] =
 #define DS2482_REG_STS_1WB		0x01
 
 
-static int ds2482_attach_adapter(struct i2c_adapter *adapter);
-static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind);
-static int ds2482_detach_client(struct i2c_client *client);
+static int ds2482_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int ds2482_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int ds2482_remove(struct i2c_client *client);
 
 
 /**
  * Driver data (common to all clients)
  */
+static const struct i2c_device_id ds2482_id[] = {
+	{ "ds2482", 0 },
+	{ }
+};
+
 static struct i2c_driver ds2482_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
 		.name	= "ds2482",
 	},
-	.attach_adapter	= ds2482_attach_adapter,
-	.detach_client	= ds2482_detach_client,
+	.probe		= ds2482_probe,
+	.remove		= ds2482_remove,
+	.id_table	= ds2482_id,
+	.detect		= ds2482_detect,
+	.address_data	= &addr_data,
 };
 
 /*
@@ -124,7 +134,7 @@ struct ds2482_w1_chan {
 };
 
 struct ds2482_data {
-	struct i2c_client	client;
+	struct i2c_client	*client;
 	struct mutex		access_lock;
 
 	/* 1-wire interface(s) */
@@ -147,7 +157,7 @@ struct ds2482_data {
 static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr)
 {
 	if (pdev->read_prt != read_ptr) {
-		if (i2c_smbus_write_byte_data(&pdev->client,
+		if (i2c_smbus_write_byte_data(pdev->client,
 					      DS2482_CMD_SET_READ_PTR,
 					      read_ptr) < 0)
 			return -1;
@@ -167,7 +177,7 @@ static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr)
  */
 static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd)
 {
-	if (i2c_smbus_write_byte(&pdev->client, cmd) < 0)
+	if (i2c_smbus_write_byte(pdev->client, cmd) < 0)
 		return -1;
 
 	pdev->read_prt = DS2482_PTR_CODE_STATUS;
@@ -187,7 +197,7 @@ static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd)
 static inline int ds2482_send_cmd_data(struct ds2482_data *pdev,
 				       u8 cmd, u8 byte)
 {
-	if (i2c_smbus_write_byte_data(&pdev->client, cmd, byte) < 0)
+	if (i2c_smbus_write_byte_data(pdev->client, cmd, byte) < 0)
 		return -1;
 
 	/* all cmds leave in STATUS, except CONFIG */
@@ -216,7 +226,7 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
 
 	if (!ds2482_select_register(pdev, DS2482_PTR_CODE_STATUS)) {
 		do {
-			temp = i2c_smbus_read_byte(&pdev->client);
+			temp = i2c_smbus_read_byte(pdev->client);
 		} while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
 			 (++retries < DS2482_WAIT_IDLE_TIMEOUT));
 	}
@@ -238,13 +248,13 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
  */
 static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel)
 {
-	if (i2c_smbus_write_byte_data(&pdev->client, DS2482_CMD_CHANNEL_SELECT,
+	if (i2c_smbus_write_byte_data(pdev->client, DS2482_CMD_CHANNEL_SELECT,
 				      ds2482_chan_wr[channel]) < 0)
 		return -1;
 
 	pdev->read_prt = DS2482_PTR_CODE_CHANNEL;
 	pdev->channel = -1;
-	if (i2c_smbus_read_byte(&pdev->client) == ds2482_chan_rd[channel]) {
+	if (i2c_smbus_read_byte(pdev->client) == ds2482_chan_rd[channel]) {
 		pdev->channel = channel;
 		return 0;
 	}
@@ -368,7 +378,7 @@ static u8 ds2482_w1_read_byte(void *data)
 	ds2482_select_register(pdev, DS2482_PTR_CODE_DATA);
 
 	/* Read the data byte */
-	result = i2c_smbus_read_byte(&pdev->client);
+	result = i2c_smbus_read_byte(pdev->client);
 
 	mutex_unlock(&pdev->access_lock);
 
@@ -415,47 +425,38 @@ static u8 ds2482_w1_reset_bus(void *data)
 }
 
 
-/**
- * Called to see if the device exists on an i2c bus.
- */
-static int ds2482_attach_adapter(struct i2c_adapter *adapter)
+static int ds2482_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
 {
-	return i2c_probe(adapter, &addr_data, ds2482_detect);
-}
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+				     I2C_FUNC_SMBUS_BYTE))
+		return -ENODEV;
 
+	strlcpy(info->type, "ds2482", I2C_NAME_SIZE);
 
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind)
+	return 0;
+}
+
+static int ds2482_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
 {
 	struct ds2482_data *data;
-	struct i2c_client  *new_client;
-	int err = 0;
+	int err = -ENODEV;
 	int temp1;
 	int idx;
 
-	if (!i2c_check_functionality(adapter,
-				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
-				     I2C_FUNC_SMBUS_BYTE))
-		goto exit;
-
 	if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
 
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->driver = &ds2482_driver;
-	new_client->adapter = adapter;
+	data->client = client;
+	i2c_set_clientdata(client, data);
 
 	/* Reset the device (sets the read_ptr to status) */
 	if (ds2482_send_cmd(data, DS2482_CMD_RESET) < 0) {
-		dev_dbg(&adapter->dev, "DS2482 reset failed at 0x%02x.\n",
-			address);
+		dev_warn(&client->dev, "DS2482 reset failed.\n");
 		goto exit_free;
 	}
 
@@ -463,10 +464,10 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind)
 	ndelay(525);
 
 	/* Read the status byte - only reset bit and line should be set */
-	temp1 = i2c_smbus_read_byte(new_client);
+	temp1 = i2c_smbus_read_byte(client);
 	if (temp1 != (DS2482_REG_STS_LL | DS2482_REG_STS_RST)) {
-		dev_dbg(&adapter->dev, "DS2482 (0x%02x) reset status "
-			"0x%02X - not a DS2482\n", address, temp1);
+		dev_warn(&client->dev, "DS2482 reset status "
+			 "0x%02X - not a DS2482\n", temp1);
 		goto exit_free;
 	}
 
@@ -478,16 +479,8 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind)
 	/* Set all config items to 0 (off) */
 	ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0);
 
-	/* We can fill in the remaining client fields */
-	snprintf(new_client->name, sizeof(new_client->name), "ds2482-%d00",
-		 data->w1_count);
-
 	mutex_init(&data->access_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto exit_free;
-
 	/* Register 1-wire interface(s) */
 	for (idx = 0; idx < data->w1_count; idx++) {
 		data->w1_ch[idx].pdev = data;
@@ -511,8 +504,6 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind)
 	return 0;
 
 exit_w1_remove:
-	i2c_detach_client(new_client);
-
 	for (idx = 0; idx < data->w1_count; idx++) {
 		if (data->w1_ch[idx].pdev != NULL)
 			w1_remove_master_device(&data->w1_ch[idx].w1_bm);
@@ -523,10 +514,10 @@ exit:
 	return err;
 }
 
-static int ds2482_detach_client(struct i2c_client *client)
+static int ds2482_remove(struct i2c_client *client)
 {
 	struct ds2482_data   *data = i2c_get_clientdata(client);
-	int err, idx;
+	int idx;
 
 	/* Unregister the 1-wire bridge(s) */
 	for (idx = 0; idx < data->w1_count; idx++) {
@@ -534,13 +525,6 @@ static int ds2482_detach_client(struct i2c_client *client)
 			w1_remove_master_device(&data->w1_ch[idx].w1_bm);
 	}
 
-	/* Detach the i2c device */
-	if ((err = i2c_detach_client(client))) {
-		dev_err(&client->dev,
-			"Deregistration failed, client not detached.\n");
-		return err;
-	}
-
 	/* Free the memory */
 	kfree(data);
 	return 0;
diff --git a/firmware/.gitignore b/firmware/.gitignore
new file mode 100644
index 00000000000..d9c69017bc9
--- /dev/null
+++ b/firmware/.gitignore
@@ -0,0 +1,6 @@
+*.gen.S
+*.fw
+*.bin
+*.csp
+*.dsp
+ihex2fw
diff --git a/firmware/Makefile b/firmware/Makefile
index e4f2fb3d191..9fe86041f86 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -56,7 +56,7 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
 else
-fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw	\
+fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw	\
 	keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw		\
 	keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw		\
 	keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 97dba0d9234..c54eaab71a1 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -69,9 +69,11 @@
 #include <linux/capi.h>
 #include <linux/gigaset_dev.h>
 
+#ifdef CONFIG_BLOCK
 #include <scsi/scsi.h>
 #include <scsi/scsi_ioctl.h>
 #include <scsi/sg.h>
+#endif
 
 #include <asm/uaccess.h>
 #include <linux/ethtool.h>
@@ -2024,6 +2026,7 @@ COMPATIBLE_IOCTL(GIO_UNISCRNMAP)
 COMPATIBLE_IOCTL(PIO_UNISCRNMAP)
 COMPATIBLE_IOCTL(PIO_FONTRESET)
 COMPATIBLE_IOCTL(PIO_UNIMAPCLR)
+#ifdef CONFIG_BLOCK
 /* Big S */
 COMPATIBLE_IOCTL(SCSI_IOCTL_GET_IDLUN)
 COMPATIBLE_IOCTL(SCSI_IOCTL_DOORLOCK)
@@ -2033,6 +2036,7 @@ COMPATIBLE_IOCTL(SCSI_IOCTL_GET_BUS_NUMBER)
 COMPATIBLE_IOCTL(SCSI_IOCTL_SEND_COMMAND)
 COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST)
 COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI)
+#endif
 /* Big T */
 COMPATIBLE_IOCTL(TUNSETNOCSUM)
 COMPATIBLE_IOCTL(TUNSETDEBUG)
@@ -2103,6 +2107,7 @@ COMPATIBLE_IOCTL(SIOCGIFVLAN)
 COMPATIBLE_IOCTL(SIOCSIFVLAN)
 COMPATIBLE_IOCTL(SIOCBRADDBR)
 COMPATIBLE_IOCTL(SIOCBRDELBR)
+#ifdef CONFIG_BLOCK
 /* SG stuff */
 COMPATIBLE_IOCTL(SG_SET_TIMEOUT)
 COMPATIBLE_IOCTL(SG_GET_TIMEOUT)
@@ -2127,6 +2132,7 @@ COMPATIBLE_IOCTL(SG_SCSI_RESET)
 COMPATIBLE_IOCTL(SG_GET_REQUEST_TABLE)
 COMPATIBLE_IOCTL(SG_SET_KEEP_ORPHAN)
 COMPATIBLE_IOCTL(SG_GET_KEEP_ORPHAN)
+#endif
 /* PPP stuff */
 COMPATIBLE_IOCTL(PPPIOCGFLAGS)
 COMPATIBLE_IOCTL(PPPIOCSFLAGS)