aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-02-13 17:34:23 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-02-13 17:34:23 -0800
commitf90203e0cf0d5a8b027d511af318bb3db4758fe2 (patch)
treed2d9157331857b4220198e053e30ce3427c5140e
parent33e563c1190c26b6bf61990c505cdcb5cdbba7e4 (diff)
parent719c91ccadd3ed26570dbb29d54166914832eee9 (diff)
Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (61 commits) [POWERPC] Use udbg_early_init() on ppc32 [POWERPC] Open Firmware serial port driver [POWERPC] Move MPIC smp routines into mpic.c [POWERPC] Cleanup pseries kexec code [POWERPC] Cleanup pseries smp initialisation code [POWERPC] Consolidate pseries platform header files into pseries.h [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S [POWERPC] cell: pm_rtas_activat_signals routine cleanup [POWERPC] cell: PPU Oprofile cleanup patch [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node [POWERPC] spu sched: static timeslicing for SCHED_RR contexts [POWERPC] spu sched: use DECLARE_BITMAP [POWERPC] spu sched: forced preemption at execution [POWERPC] spu sched: update some comments [POWERPC] spu sched: simplity spu_remove_from_active_list [POWERPC] spufs: optimize spu_run [POWERPC] spufs: runqueue simplification [POWERPC] spufs: move prio to spu_context [POWERPC] spufs: state_mutex cleanup [POWERPC] spufs: simplify state_mutex ...
-rw-r--r--Documentation/powerpc/booting-without-of.txt4
-rw-r--r--Documentation/powerpc/mpc52xx-device-tree-bindings.txt183
-rw-r--r--arch/powerpc/Kconfig2
-rw-r--r--arch/powerpc/boot/dts/kuroboxHD.dts148
-rw-r--r--arch/powerpc/boot/dts/lite5200.dts135
-rw-r--r--arch/powerpc/boot/dts/lite5200b.dts135
-rw-r--r--arch/powerpc/boot/dts/mpc8313erdb.dts219
-rw-r--r--arch/powerpc/boot/dts/mpc8349emitxgp.dts187
-rw-r--r--arch/powerpc/boot/dts/mpc834x_mds.dts (renamed from arch/powerpc/boot/dts/mpc8349emds.dts)6
-rw-r--r--arch/powerpc/boot/dts/mpc8568mds.dts380
-rw-r--r--arch/powerpc/configs/linkstation_defconfig118
-rw-r--r--arch/powerpc/configs/mpc8313_rdb_defconfig1409
-rw-r--r--arch/powerpc/configs/mpc834x_itx_defconfig232
-rw-r--r--arch/powerpc/configs/mpc834x_itxgp_defconfig1174
-rw-r--r--arch/powerpc/configs/mpc834x_mds_defconfig9
-rw-r--r--arch/powerpc/configs/mpc8568mds_defconfig992
-rw-r--r--arch/powerpc/kernel/btext.c9
-rw-r--r--arch/powerpc/kernel/cputable.c2
-rw-r--r--arch/powerpc/kernel/head_44x.S2
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S7
-rw-r--r--arch/powerpc/kernel/legacy_serial.c15
-rw-r--r--arch/powerpc/kernel/prom_init.c81
-rw-r--r--arch/powerpc/kernel/setup_32.c8
-rw-r--r--arch/powerpc/kernel/smp.c23
-rw-r--r--arch/powerpc/kernel/udbg.c2
-rw-r--r--arch/powerpc/kernel/vdso.c34
-rw-r--r--arch/powerpc/mm/mem.c3
-rw-r--r--arch/powerpc/mm/pgtable_32.c2
-rw-r--r--arch/powerpc/oprofile/op_model_cell.c149
-rw-r--r--arch/powerpc/platforms/52xx/Makefile2
-rw-r--r--arch/powerpc/platforms/52xx/efika-pci.c119
-rw-r--r--arch/powerpc/platforms/52xx/efika-setup.c150
-rw-r--r--arch/powerpc/platforms/52xx/efika.c243
-rw-r--r--arch/powerpc/platforms/52xx/efika.h19
-rw-r--r--arch/powerpc/platforms/52xx/lite5200.c29
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_common.c4
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_pic.c10
-rw-r--r--arch/powerpc/platforms/83xx/Kconfig24
-rw-r--r--arch/powerpc/platforms/83xx/Makefile3
-rw-r--r--arch/powerpc/platforms/83xx/mpc8313_rdb.c99
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_itx.c2
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_mds.c (renamed from arch/powerpc/platforms/83xx/mpc834x_sys.c)95
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_sys.h23
-rw-r--r--arch/powerpc/platforms/83xx/mpc83xx.h18
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig13
-rw-r--r--arch/powerpc/platforms/85xx/Makefile1
-rw-r--r--arch/powerpc/platforms/85xx/mpc8568_mds.c246
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ads.c7
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_cds.c17
-rw-r--r--arch/powerpc/platforms/Makefile2
-rw-r--r--arch/powerpc/platforms/cell/pmu.c14
-rw-r--r--arch/powerpc/platforms/cell/spu_manage.c102
-rw-r--r--arch/powerpc/platforms/cell/spufs/context.c137
-rw-r--r--arch/powerpc/platforms/cell/spufs/file.c144
-rw-r--r--arch/powerpc/platforms/cell/spufs/run.c16
-rw-r--r--arch/powerpc/platforms/cell/spufs/sched.c386
-rw-r--r--arch/powerpc/platforms/cell/spufs/spufs.h50
-rw-r--r--arch/powerpc/platforms/celleb/htab.c19
-rw-r--r--arch/powerpc/platforms/embedded6xx/linkstation.c12
-rw-r--r--arch/powerpc/platforms/ps3/spu.c42
-rw-r--r--arch/powerpc/platforms/pseries/Makefile1
-rw-r--r--arch/powerpc/platforms/pseries/firmware.h17
-rw-r--r--arch/powerpc/platforms/pseries/kexec.c72
-rw-r--r--arch/powerpc/platforms/pseries/pci.c4
-rw-r--r--arch/powerpc/platforms/pseries/pseries.h36
-rw-r--r--arch/powerpc/platforms/pseries/ras.c2
-rw-r--r--arch/powerpc/platforms/pseries/ras.h9
-rw-r--r--arch/powerpc/platforms/pseries/setup.c60
-rw-r--r--arch/powerpc/platforms/pseries/smp.c1
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c78
-rw-r--r--arch/powerpc/sysdev/mpic.c21
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_slow.c6
-rw-r--r--arch/powerpc/xmon/xmon.c1
-rw-r--r--arch/ppc/configs/taishan_defconfig1077
-rw-r--r--arch/ppc/kernel/head_fsl_booke.S7
-rw-r--r--arch/ppc/kernel/ppc_ksyms.c2
-rw-r--r--arch/ppc/mm/pgtable.c2
-rw-r--r--arch/ppc/platforms/4xx/Kconfig10
-rw-r--r--arch/ppc/platforms/4xx/Makefile1
-rw-r--r--arch/ppc/platforms/4xx/taishan.c395
-rw-r--r--arch/ppc/platforms/4xx/taishan.h67
-rw-r--r--arch/ppc/syslib/Makefile1
-rw-r--r--drivers/ata/pata_mpc52xx.c6
-rw-r--r--drivers/macintosh/adbhid.c4
-rw-r--r--drivers/macintosh/apm_emu.c2
-rw-r--r--drivers/macintosh/mac_hid.c4
-rw-r--r--drivers/macintosh/therm_adt746x.c6
-rw-r--r--drivers/macintosh/via-cuda.c2
-rw-r--r--drivers/macintosh/via-macii.c10
-rw-r--r--drivers/macintosh/via-maciisi.c6
-rw-r--r--drivers/macintosh/via-pmu.c13
-rw-r--r--drivers/macintosh/via-pmu68k.c4
-rw-r--r--drivers/serial/Kconfig10
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/mpc52xx_uart.c5
-rw-r--r--drivers/serial/of_serial.c143
-rw-r--r--include/asm-powerpc/cell-pmu.h15
-rw-r--r--include/asm-powerpc/floppy.h135
-rw-r--r--include/asm-powerpc/spu.h1
-rw-r--r--include/asm-powerpc/systbl.h1
-rw-r--r--include/asm-powerpc/ucc_slow.h2
-rw-r--r--include/asm-powerpc/udbg.h1
-rw-r--r--include/asm-powerpc/vdso.h5
-rw-r--r--include/asm-ppc/ibm4xx.h4
104 files changed, 8495 insertions, 1473 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 33994271cb3..3b514672b80 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1334,6 +1334,9 @@ platforms are moved over to use the flattened-device-tree model.
fsl-usb2-mph compatible controllers. Either this property or
"port0" (or both) must be defined for "fsl-usb2-mph" compatible
controllers.
+ - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible
+ controllers. Can be "host", "peripheral", or "otg". Default to
+ "host" if not defined for backward compatibility.
Recommended properties :
- interrupts : <a b> where a is the interrupt number and b is a
@@ -1367,6 +1370,7 @@ platforms are moved over to use the flattened-device-tree model.
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 1>;
+ dr_mode = "otg";
phy = "ulpi";
};
diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
index 69f016f02bb..e59fcbbe338 100644
--- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
@@ -1,7 +1,7 @@
-MPC52xx Device Tree Bindings
+MPC5200 Device Tree Bindings
----------------------------
-(c) 2006 Secret Lab Technologies Ltd
+(c) 2006-2007 Secret Lab Technologies Ltd
Grant Likely <grant.likely at secretlab.ca>
********** DRAFT ***********
@@ -20,11 +20,11 @@ described in Documentation/powerpc/booting-without-of.txt), or passed
by Open Firmare (IEEE 1275) compatible firmware using an OF compatible
client interface API.
-This document specifies the requirements on the device-tree for mpc52xx
+This document specifies the requirements on the device-tree for mpc5200
based boards. These requirements are above and beyond the details
specified in either the OpenFirmware spec or booting-without-of.txt
-All new mpc52xx-based boards are expected to match this document. In
+All new mpc5200-based boards are expected to match this document. In
cases where this document is not sufficient to support a new board port,
this document should be updated as part of adding the new board support.
@@ -32,26 +32,26 @@ II - Philosophy
===============
The core of this document is naming convention. The whole point of
defining this convention is to reduce or eliminate the number of
-special cases required to support a 52xx board. If all 52xx boards
-follow the same convention, then generic 52xx support code will work
+special cases required to support a 5200 board. If all 5200 boards
+follow the same convention, then generic 5200 support code will work
rather than coding special cases for each new board.
This section tries to capture the thought process behind why the naming
convention is what it is.
-1. Node names
--------------
+1. names
+---------
There is strong convention/requirements already established for children
of the root node. 'cpus' describes the processor cores, 'memory'
describes memory, and 'chosen' provides boot configuration. Other nodes
are added to describe devices attached to the processor local bus.
+
Following convention already established with other system-on-chip
-processors, MPC52xx boards must have an 'soc5200' node as a child of the
-root node.
+processors, 5200 device trees should use the name 'soc5200' for the
+parent node of on chip devices, and the root node should be its parent.
-The soc5200 node holds child nodes for all on chip devices. Child nodes
-are typically named after the configured function. ie. the FEC node is
-named 'ethernet', and a PSC in uart mode is named 'serial'.
+Child nodes are typically named after the configured function. ie.
+the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'.
2. device_type property
-----------------------
@@ -66,28 +66,47 @@ exactly.
Since device_type isn't enough to match devices to drivers, there also
needs to be a naming convention for the compatible property. Compatible
is an list of device descriptions sorted from specific to generic. For
-the mpc52xx, the required format for each compatible value is
-<chip>-<device>[-<mode>]. At the minimum, the list shall contain two
-items; the first specifying the exact chip, and the second specifying
-mpc52xx for the chip.
-
-ie. ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc52xx-ethernet"
-
-The idea here is that most drivers will match to the most generic field
-in the compatible list (mpc52xx-*), but can also test the more specific
-field for enabling bug fixes or extra features.
+the mpc5200, the required format for each compatible value is
+<chip>-<device>[-<mode>]. The OS should be able to match a device driver
+to the device based solely on the compatible value. If two drivers
+match on the compatible list; the 'most compatible' driver should be
+selected.
+
+The split between the MPC5200 and the MPC5200B leaves a bit of a
+connundrum. How should the compatible property be set up to provide
+maximum compatability information; but still acurately describe the
+chip? For the MPC5200; the answer is easy. Most of the SoC devices
+originally appeared on the MPC5200. Since they didn't exist anywhere
+else; the 5200 compatible properties will contain only one item;
+"mpc5200-<device>".
+
+The 5200B is almost the same as the 5200, but not quite. It fixes
+silicon bugs and it adds a small number of enhancements. Most of the
+devices either provide exactly the same interface as on the 5200. A few
+devices have extra functions but still have a backwards compatible mode.
+To express this infomation as completely as possible, 5200B device trees
+should have two items in the compatible list;
+"mpc5200b-<device>\0mpc5200-<device>". It is *strongly* recommended
+that 5200B device trees follow this convention (instead of only listing
+the base mpc5200 item).
+
+If another chip appear on the market with one of the mpc5200 SoC
+devices, then the compatible list should include mpc5200-<device>.
+
+ie. ethernet on mpc5200: compatible = "mpc5200-ethernet"
+ ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet"
Modal devices, like PSCs, also append the configured function to the
end of the compatible field. ie. A PSC in i2s mode would specify
-"mpc52xx-psc-i2s", not "mpc52xx-i2s". This convention is chosen to
+"mpc5200-psc-i2s", not "mpc5200-i2s". This convention is chosen to
avoid naming conflicts with non-psc devices providing the same
-function. For example, "mpc52xx-spi" and "mpc52xx-psc-spi" describe
+function. For example, "mpc5200-spi" and "mpc5200-psc-spi" describe
the mpc5200 simple spi device and a PSC spi mode respectively.
If the soc device is more generic and present on other SOCs, the
compatible property can specify the more generic device type also.
-ie. mscan: compatible = "mpc5200-mscan\0mpc52xx-mscan\0fsl,mscan";
+ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan";
At the time of writing, exact chip may be either 'mpc5200' or
'mpc5200b'.
@@ -96,7 +115,7 @@ Device drivers should always try to match as generically as possible.
III - Structure
===============
-The device tree for an mpc52xx board follows the structure defined in
+The device tree for an mpc5200 board follows the structure defined in
booting-without-of.txt with the following additional notes:
0) the root node
@@ -115,7 +134,7 @@ Typical memory description node; see booting-without-of.
3) The soc5200 node
-------------------
-This node describes the on chip SOC peripherals. Every mpc52xx based
+This node describes the on chip SOC peripherals. Every mpc5200 based
board will have this node, and as such there is a common naming
convention for SOC devices.
@@ -125,71 +144,111 @@ name type description
device_type string must be "soc"
ranges int should be <0 baseaddr baseaddr+10000>
reg int must be <baseaddr 10000>
+compatible string mpc5200: "mpc5200-soc"
+ mpc5200b: "mpc5200b-soc\0mpc5200-soc"
+system-frequency int Fsystem frequency; source of all
+ other clocks.
+bus-frequency int IPB bus frequency in HZ. Clock rate
+ used by most of the soc devices.
+#interrupt-cells int must be <3>.
Recommended properties:
name type description
---- ---- -----------
-compatible string should be "<chip>-soc\0mpc52xx-soc"
- ie. "mpc5200b-soc\0mpc52xx-soc"
-#interrupt-cells int must be <3>. If it is not defined
- here then it must be defined in every
- soc device node.
-bus-frequency int IPB bus frequency in HZ. Clock rate
- used by most of the soc devices.
- Defining it here avoids needing it
- added to every device node.
+model string Exact model of the chip;
+ ie: model="fsl,mpc5200"
+revision string Silicon revision of chip
+ ie: revision="M08A"
+
+The 'model' and 'revision' properties are *strongly* recommended. Having
+them presence acts as a bit of a safety net for working around as yet
+undiscovered bugs on one version of silicon. For example, device drivers
+can use the model and revision properties to decide if a bug fix should
+be turned on.
4) soc5200 child nodes
----------------------
Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
-Note: in the tables below, '*' matches all <chip> values. ie.
-*-pic would translate to "mpc5200-pic\0mpc52xx-pic"
+Note: The tables below show the value for the mpc5200. A mpc5200b device
+tree should use the "mpc5200b-<device>\0mpc5200-<device> form.
Required soc5200 child nodes:
name device_type compatible Description
---- ----------- ---------- -----------
-cdm@<addr> cdm *-cmd Clock Distribution
-pic@<addr> interrupt-controller *-pic need an interrupt
+cdm@<addr> cdm mpc5200-cmd Clock Distribution
+pic@<addr> interrupt-controller mpc5200-pic need an interrupt
controller to boot
-bestcomm@<addr> dma-controller *-bestcomm 52xx pic also requires
- the bestcomm device
+bestcomm@<addr> dma-controller mpc5200-bestcomm 5200 pic also requires
+ the bestcomm device
Recommended soc5200 child nodes; populate as needed for your board
-name device_type compatible Description
----- ----------- ---------- -----------
-gpt@<addr> gpt *-gpt General purpose timers
-rtc@<addr> rtc *-rtc Real time clock
-mscan@<addr> mscan *-mscan CAN bus controller
-pci@<addr> pci *-pci PCI bridge
-serial@<addr> serial *-psc-uart PSC in serial mode
-i2s@<addr> sound *-psc-i2s PSC in i2s mode
-ac97@<addr> sound *-psc-ac97 PSC in ac97 mode
-spi@<addr> spi *-psc-spi PSC in spi mode
-irda@<addr> irda *-psc-irda PSC in IrDA mode
-spi@<addr> spi *-spi MPC52xx spi device
-ethernet@<addr> network *-fec MPC52xx ethernet device
-ata@<addr> ata *-ata IDE ATA interface
-i2c@<addr> i2c *-i2c I2C controller
-usb@<addr> usb-ohci-be *-ohci,ohci-be USB controller
-xlb@<addr> xlb *-xlb XLB arbritrator
+name device_type compatible Description
+---- ----------- ---------- -----------
+gpt@<addr> gpt mpc5200-gpt General purpose timers
+rtc@<addr> rtc mpc5200-rtc Real time clock
+mscan@<addr> mscan mpc5200-mscan CAN bus controller
+pci@<addr> pci mpc5200-pci PCI bridge
+serial@<addr> serial mpc5200-psc-uart PSC in serial mode
+i2s@<addr> sound mpc5200-psc-i2s PSC in i2s mode
+ac97@<addr> sound mpc5200-psc-ac97 PSC in ac97 mode
+spi@<addr> spi mpc5200-psc-spi PSC in spi mode
+irda@<addr> irda mpc5200-psc-irda PSC in IrDA mode
+spi@<addr> spi mpc5200-spi MPC5200 spi device
+ethernet@<addr> network mpc5200-fec MPC5200 ethernet device
+ata@<addr> ata mpc5200-ata IDE ATA interface
+i2c@<addr> i2c mpc5200-i2c I2C controller
+usb@<addr> usb-ohci-be mpc5200-ohci,ohci-be USB controller
+xlb@<addr> xlb mpc5200-xlb XLB arbritrator
+
+Important child node properties
+name type description
+---- ---- -----------
+cell-index int When multiple devices are present, is the
+ index of the device in the hardware (ie. There
+ are 6 PSC on the 5200 numbered PSC1 to PSC6)
+ PSC1 has 'cell-index = <0>'
+ PSC4 has 'cell-index = <3>'
+
+5) General Purpose Timer nodes (child of soc5200 node)
+On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board
+design supports the internal wdt, then the device node for GPT0 should
+include the empty property 'has-wdt'.
+
+6) PSC nodes (child of soc5200 node)
+PSC nodes can define the optional 'port-number' property to force assignment
+order of serial ports. For example, PSC5 might be physically connected to
+the port labeled 'COM1' and PSC1 wired to 'COM1'. In this case, PSC5 would
+have a "port-number = <0>" property, and PSC1 would have "port-number = <1>".
+
+PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in
+i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
+compatible field.
IV - Extra Notes
================
1. Interrupt mapping
--------------------
-The mpc52xx pic driver splits hardware IRQ numbers into two levels. The
+The mpc5200 pic driver splits hardware IRQ numbers into two levels. The
split reflects the layout of the PIC hardware itself, which groups
interrupts into one of three groups; CRIT, MAIN or PERP. Also, the
Bestcomm dma engine has it's own set of interrupt sources which are
cascaded off of peripheral interrupt 0, which the driver interprets as a
fourth group, SDMA.
-The interrupts property for device nodes using the mpc52xx pic consists
+The interrupts property for device nodes using the mpc5200 pic consists
of three cells; <L1 L2 level>
L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
L2 := interrupt number; directly mapped from the value in the
"ICTL PerStat, MainStat, CritStat Encoded Register"
level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
+
+2. Shared registers
+-------------------
+Some SoC devices share registers between them. ie. the i2c devices use
+a single clock control register, and almost all device are affected by
+the port_config register. Devices which need to manipulate shared regs
+should look to the parent SoC node. The soc node is responsible
+for arbitrating all shared register access.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 0088c5ebca7..340d9beab6d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -876,7 +876,7 @@ config ARCH_SPARSEMEM_ENABLE
config ARCH_SPARSEMEM_DEFAULT
def_bool y
- depends on (SMP && PPC_PSERIES) || PPC_CELL
+ depends on (SMP && PPC_PSERIES) || PPC_PS3
config ARCH_POPULATES_NODE_MAP
def_bool y
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
new file mode 100644
index 00000000000..096e94ac415
--- /dev/null
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -0,0 +1,148 @@
+/*
+ * Device Tree Souce for Buffalo KuroboxHD
+ *
+ * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
+ * the default configuration linkstation_defconfig.
+ *
+ * Based on sandpoint.dts
+ *
+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+
+XXXX add flash parts, rtc, ??
+
+build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
+
+
+ */
+
+/ {
+ linux,phandle = <1000>;
+ model = "KuroboxHD";
+ compatible = "linkstation";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ linux,phandle = <2000>;
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,603e { /* Really 8241 */
+ linux,phandle = <2100>;
+ linux,boot-cpu;
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <bebc200>; /* Fixed by bootwrapper */
+ timebase-frequency = <1743000>; /* Fixed by bootwrapper */
+ bus-frequency = <0>; /* From bootloader */
+ /* Following required by dtc but not used */
+ i-cache-line-size = <0>;
+ d-cache-line-size = <0>;
+ i-cache-size = <4000>;
+ d-cache-size = <4000>;
+ };
+ };
+
+ memory {
+ linux,phandle = <3000>;
+ device_type = "memory";
+ reg = <00000000 04000000>;
+ };
+
+ soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+ linux,phandle = <4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ compatible = "mpc10x";
+ store-gathering = <0>; /* 0 == off, !0 == on */
+ reg = <80000000 00100000>;
+ ranges = <80000000 80000000 70000000 /* pci mem space */
+ fc000000 fc000000 00100000 /* EUMB */
+ fe000000 fe000000 00c00000 /* pci i/o space */
+ fec00000 fec00000 00300000 /* pci cfg regs */
+ fef00000 fef00000 00100000>; /* pci iack */
+
+ i2c@80003000 {
+ linux,phandle = <4300>;
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <80003000 1000>;
+ interrupts = <5 2>;
+ interrupt-parent = <4400>;
+ };
+
+ serial@80004500 {
+ linux,phandle = <4511>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <80004500 8>;
+ clock-frequency = <5d08d88>;
+ current-speed = <2580>;
+ interrupts = <9 2>;
+ interrupt-parent = <4400>;
+ };
+
+ serial@80004600 {
+ linux,phandle = <4512>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <80004600 8>;
+ clock-frequency = <5d08d88>;
+ current-speed = <e100>;
+ interrupts = <a 0>;
+ interrupt-parent = <4400>;
+ };
+
+ pic@80040000 {
+ linux,phandle = <4400>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ reg = <80040000 40000>;
+ built-in;
+ };
+
+ pci@fec00000 {
+ linux,phandle = <4500>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "mpc10x-pci";
+ reg = <fec00000 400000>;
+ ranges = <01000000 0 0 fe000000 0 00c00000
+ 02000000 0 80000000 80000000 0 70000000>;
+ bus-range = <0 ff>;
+ clock-frequency = <7f28155>;
+ interrupt-parent = <4400>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 - IRQ0 ETH */
+ 5800 0 0 1 4400 0 1
+ 5800 0 0 2 4400 1 1
+ 5800 0 0 3 4400 2 1
+ 5800 0 0 4 4400 3 1
+ /* IDSEL 0x12 - IRQ1 IDE0 */
+ 6000 0 0 1 4400 1 1
+ 6000 0 0 2 4400 2 1
+ 6000 0 0 3 4400 3 1
+ 6000 0 0 4 4400 0 1
+ /* IDSEL 0x14 - IRQ3 USB2.0 */
+ 7000 0 0 1 4400 3 1
+ 7000 0 0 2 4400 3 1
+ 7000 0 0 3 4400 3 1
+ 7000 0 0 4 4400 3 1
+ >;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 186870704ad..c03103c6328 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -1,7 +1,7 @@
/*
* Lite5200 board Device Tree Source
*
- * Copyright 2006 Secret Lab Technologies Ltd.
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
*
* This program is free software; you can redistribute it and/or modify it
@@ -17,8 +17,9 @@
*/
/ {
- model = "Lite5200";
- compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx";
+ model = "fsl,lite5200";
+ // revision = "1.0";
+ compatible = "fsl,lite5200\0generic-mpc5200";
#address-cells = <1>;
#size-cells = <1>;
@@ -47,14 +48,17 @@
};
soc5200@f0000000 {
+ model = "fsl,mpc5200";
+ revision = "" // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
ranges = <0 f0000000 f0010000>;
reg = <f0000000 00010000>;
bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
cdm@200 {
- compatible = "mpc5200-cdm\0mpc52xx-cdm";
+ compatible = "mpc5200-cdm";
reg = <200 38>;
};
@@ -64,77 +68,86 @@
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
- compatible = "mpc5200-pic\0mpc52xx-pic";
+ compatible = "mpc5200-pic";
reg = <500 80>;
built-in;
};
gpt@600 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <0>;
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <500>;
+ has-wdt;
};
gpt@610 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <1>;
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <500>;
};
gpt@620 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <2>;
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <500>;
};
gpt@630 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <3>;
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <500>;
};
gpt@640 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <4>;
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <500>;
};
gpt@650 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <5>;
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <500>;
};
gpt@660 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <6>;
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <500>;
};
gpt@670 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <7>;
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <500>;
};
rtc@800 { // Real time clock
- compatible = "mpc5200-rtc\0mpc52xx-rtc";
+ compatible = "mpc5200-rtc";
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
@@ -143,7 +156,8 @@
mscan@900 {
device_type = "mscan";
- compatible = "mpc5200-mscan\0mpc52xx-mscan";
+ compatible = "mpc5200-mscan";
+ cell-index = <0>;
interrupts = <2 11 0>;
interrupt-parent = <500>;
reg = <900 80>;
@@ -151,21 +165,22 @@
mscan@980 {
device_type = "mscan";
- compatible = "mpc5200-mscan\0mpc52xx-mscan";
+ compatible = "mpc5200-mscan";
+ cell-index = <1>;
interrupts = <1 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
gpio@b00 {
- compatible = "mpc5200-gpio\0mpc52xx-gpio";
+ compatible = "mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <500>;
};
gpio-wkup@b00 {
- compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup";
+ compatible = "mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <500>;
@@ -176,7 +191,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- compatible = "mpc5200-pci\0mpc52xx-pci";
+ compatible = "mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 500 0 0 3
@@ -194,7 +209,7 @@
spi@f00 {
device_type = "spi";
- compatible = "mpc5200-spi\0mpc52xx-spi";
+ compatible = "mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <500>;
@@ -202,7 +217,7 @@
usb@1000 {
device_type = "usb-ohci-be";
- compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be";
+ compatible = "mpc5200-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <500>;
@@ -210,7 +225,7 @@
bestcomm@1200 {
device_type = "dma-controller";
- compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm";
+ compatible = "mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
@@ -220,67 +235,73 @@
};
xlb@1f00 {
- compatible = "mpc5200-xlb\0mpc52xx-xlb";
+ compatible = "mpc5200-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
- compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ compatible = "mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
+ cell-index = <0>;
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <500>;
};
- // PSC2 in spi mode example
- spi@2200 { // PSC2
- device_type = "spi";
- compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi";
- reg = <2200 100>;
- interrupts = <2 2 0>;
- interrupt-parent = <500>;
- };
+ // PSC2 in ac97 mode example
+ //ac97@2200 { // PSC2
+ // device_type = "sound";
+ // compatible = "mpc5200-psc-ac97";
+ // cell-index = <1>;
+ // reg = <2200 100>;
+ // interrupts = <2 2 0>;
+ // interrupt-parent = <500>;
+ //};
// PSC3 in CODEC mode example
- i2s@2400 { // PSC3
- device_type = "sound";
- compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s";
- reg = <2400 100>;
- interrupts = <2 3 0>;
- interrupt-parent = <500>;
- };
+ //i2s@2400 { // PSC3
+ // device_type = "sound";
+ // compatible = "mpc5200-psc-i2s";
+ // cell-index = <2>;
+ // reg = <2400 100>;
+ // interrupts = <2 3 0>;
+ // interrupt-parent = <500>;
+ //};
- // PSC4 unconfigured
+ // PSC4 in uart mode example
//serial@2600 { // PSC4
// device_type = "serial";
- // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ // compatible = "mpc5200-psc-uart";
+ // cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
// interrupt-parent = <500>;
//};
- // PSC5 unconfigured
+ // PSC5 in uart mode example
//serial@2800 { // PSC5
// device_type = "serial";
- // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ // compatible = "mpc5200-psc-uart";
+ // cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
// interrupt-parent = <500>;
//};
- // PSC6 in AC97 mode example
- ac97@2c00 { // PSC6
- device_type = "sound";
- compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97";
- reg = <2c00 100>;
- interrupts = <2 4 0>;
- interrupt-parent = <500>;
- };
+ // PSC6 in spi mode example
+ //spi@2c00 { // PSC6
+ // device_type = "spi";
+ // compatible = "mpc5200-psc-spi";
+ // cell-index = <5>;
+ // reg = <2c00 100>;
+ // interrupts = <2 4 0>;
+ // interrupt-parent = <500>;
+ //};
ethernet@3000 {
device_type = "network";
- compatible = "mpc5200-fec\0mpc52xx-fec";
+ compatible = "mpc5200-fec";
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
@@ -289,7 +310,7 @@
ata@3a00 {
device_type = "ata";
- compatible = "mpc5200-ata\0mpc52xx-ata";
+ compatible = "mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <500>;
@@ -297,7 +318,8 @@
i2c@3d00 {
device_type = "i2c";
- compatible = "mpc5200-i2c\0mpc52xx-i2c";
+ compatible = "mpc5200-i2c";
+ cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
@@ -305,14 +327,15 @@
i2c@3d40 {
device_type = "i2c";
- compatible = "mpc5200-i2c\0mpc52xx-i2c";
+ compatible = "mpc5200-i2c";
+ cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
};
sram@8000 {
device_type = "sram";
- compatible = "mpc5200-sram\0mpc52xx-sram\0sram";
+ compatible = "mpc5200-sram\0sram";
reg = <8000 4000>;
};
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 5bb2760d7c3..3875ca9a9a6 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -1,7 +1,7 @@
/*
* Lite5200B board Device Tree Source
*
- * Copyright 2006 Secret Lab Technologies Ltd.
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
*
* This program is free software; you can redistribute it and/or modify it
@@ -17,8 +17,9 @@
*/
/ {
- model = "Lite5200b";
- compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx";
+ model = "fsl,lite5200b";
+ // revision = "1.0";
+ compatible = "fsl,lite5200b\0generic-mpc5200";
#address-cells = <1>;
#size-cells = <1>;
@@ -47,14 +48,17 @@
};
soc5200@f0000000 {
+ model = "fsl,mpc5200b";
+ revision = ""; // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
ranges = <0 f0000000 f0010000>;
reg = <f0000000 00010000>;
bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
cdm@200 {
- compatible = "mpc5200b-cdm\0mpc52xx-cdm";
+ compatible = "mpc5200b-cdm\0mpc5200-cdm";
reg = <200 38>;
};
@@ -64,77 +68,86 @@
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
- compatible = "mpc5200b-pic\0mpc52xx-pic";
+ compatible = "mpc5200b-pic\0mpc5200-pic";
reg = <500 80>;
built-in;
};
gpt@600 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <0>;
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <500>;
+ has-wdt;
};
gpt@610 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <1>;
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <500>;
};
gpt@620 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <2>;
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <500>;
};
gpt@630 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <3>;
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <500>;
};
gpt@640 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <4>;
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <500>;
};
gpt@650 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <5>;
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <500>;
};
gpt@660 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <6>;
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <500>;
};
gpt@670 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <7>;
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <500>;
};
rtc@800 { // Real time clock
- compatible = "mpc5200b-rtc\0mpc52xx-rtc";
+ compatible = "mpc5200b-rtc\0mpc5200-rtc";
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
@@ -143,7 +156,8 @@
mscan@900 {
device_type = "mscan";
- compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+ compatible = "mpc5200b-mscan\0mpc5200-mscan";
+ cell-index = <0>;
interrupts = <2 11 0>;
interrupt-parent = <500>;
reg = <900 80>;
@@ -151,21 +165,22 @@
mscan@980 {
device_type = "mscan";
- compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+ compatible = "mpc5200b-mscan\0mpc5200-mscan";
+ cell-index = <1>;
interrupts = <1 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
gpio@b00 {
- compatible = "mpc5200b-gpio\0mpc52xx-gpio";
+ compatible = "mpc5200b-gpio\0mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <500>;
};
gpio-wkup@b00 {
- compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup";
+ compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <500>;
@@ -176,7 +191,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- compatible = "mpc5200b-pci\0mpc52xx-pci";
+ compatible = "mpc5200b-pci\0mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
@@ -199,7 +214,7 @@
spi@f00 {
device_type = "spi";
- compatible = "mpc5200b-spi\0mpc52xx-spi";
+ compatible = "mpc5200b-spi\0mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <500>;
@@ -207,7 +222,7 @@
usb@1000 {
device_type = "usb-ohci-be";
- compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be";
+ compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <500>;
@@ -215,7 +230,7 @@
bestcomm@1200 {
device_type = "dma-controller";
- compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm";
+ compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
@@ -225,67 +240,73 @@
};
xlb@1f00 {
- compatible = "mpc5200b-xlb\0mpc52xx-xlb";
+ compatible = "mpc5200b-xlb\0mpc5200-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
- compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
+ cell-index = <0>;
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <500>;
};
- // PSC2 in spi mode example
- spi@2200 { // PSC2
- device_type = "spi";
- compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi";
- reg = <2200 100>;
- interrupts = <2 2 0>;
- interrupt-parent = <500>;
- };
+ // PSC2 in ac97 mode example
+ //ac97@2200 { // PSC2
+ // device_type = "sound";
+ // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97";
+ // cell-index = <1>;
+ // reg = <2200 100>;
+ // interrupts = <2 2 0>;
+ // interrupt-parent = <500>;
+ //};
// PSC3 in CODEC mode example
- i2s@2400 { // PSC3
- device_type = "sound";
- compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s";
- reg = <2400 100>;
- interrupts = <2 3 0>;
- interrupt-parent = <500>;
- };
+ //i2s@2400 { // PSC3
+ // device_type = "sound";
+ // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible
+ // cell-index = <2>;
+ // reg = <2400 100>;
+ // interrupts = <2 3 0>;
+ // interrupt-parent = <500>;
+ //};
- // PSC4 unconfigured
+ // PSC4 in uart mode example
//serial@2600 { // PSC4
// device_type = "serial";
- // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ // cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
// interrupt-parent = <500>;
//};
- // PSC5 unconfigured
+ // PSC5 in uart mode example
//serial@2800 { // PSC5
// device_type = "serial";
- // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ // cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
// interrupt-parent = <500>;
//};
- // PSC6 in AC97 mode example
- ac97@2c00 { // PSC6
- device_type = "sound";
- compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97";
- reg = <2c00 100>;
- interrupts = <2 4 0>;
- interrupt-parent = <500>;
- };
+ // PSC6 in spi mode example
+ //spi@2c00 { // PSC6
+ // device_type = "spi";
+ // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
+ // cell-index = <5>;
+ // reg = <2c00 100>;
+ // interrupts = <2 4 0>;
+ // interrupt-parent = <500>;
+ //};
ethernet@3000 {
device_type = "network";
- compatible = "mpc5200b-fec\0mpc52xx-fec";
+ compatible = "mpc5200b-fec\0mpc5200-fec";
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
@@ -294,7 +315,7 @@
ata@3a00 {
device_type = "ata";
- compatible = "mpc5200b-ata\0mpc52xx-ata";
+ compatible = "mpc5200b-ata\0mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <500>;
@@ -302,7 +323,8 @@
i2c@3d00 {
device_type = "i2c";
- compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c";
+ cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
@@ -310,14 +332,15 @@
i2c@3d40 {
device_type = "i2c";
- compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c";
+ cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
};
sram@8000 {
device_type = "sram";
- compatible = "mpc5200b-sram\0mpc52xx-sram\0sram";
+ compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
reg = <8000 4000>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
new file mode 100644
index 00000000000..3d2f5a06df3
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -0,0 +1,219 @@
+/*
+ * MPC8313E RDB Device Tree Source
+ *
+ * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "MPC8313ERDB";
+ compatible = "MPC83xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8313@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 08000000>; // 128MB at 0
+ };
+
+ soc8313@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <f 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ spi@7000 {
+ device_type = "spi";
+ compatible = "mpc83xx_spi";
+ reg = <7000 1000>;
+ interrupts = <10 8>;
+ interrupt-parent = <700>;
+ mode = <0>;
+ };
+
+ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+ usb@23000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <700>;
+ interrupts = <26 2>;
+ phy_type = "utmi_wide";
+ };
+
+ mdio@24520 {
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <24520>;
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <700>;
+ interrupts = <13 2>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@4 {
+ linux,phandle = <2452004>;
+ interrupt-parent = <700>;
+ interrupts = <14 2>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <25 8 24 8 23 8>;
+ interrupt-parent = <700>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@25000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <22 8 21 8 20 8>;
+ interrupt-parent = <700>;
+ phy-handle = <2452004>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <9 8>;
+ interrupt-parent = <700>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <a 8>;
+ interrupt-parent = <700>;
+ };
+
+ pci@8500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x0E -mini PCI */
+ 7000 0 0 1 700 12 8
+ 7000 0 0 2 700 12 8
+ 7000 0 0 3 700 12 8
+ 7000 0 0 4 700 12 8
+
+ /* IDSEL 0x0F - PCI slot */
+ 7800 0 0 1 700 11 8
+ 7800 0 0 2 700 12 8
+ 7800 0 0 3 700 11 8
+ 7800 0 0 4 700 12 8>;
+ interrupt-parent = <700>;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8500 100>;
+ compatible = "83xx";
+ device_type = "pci";
+ };
+
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 7000>;
+ interrupts = <b 8>;
+ interrupt-parent = <700>;
+ /* Rev. 2.2 */
+ num-channels = <1>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000004c>;
+ descriptor-types-mask = <0122003f>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ pic@700 {
+ linux,phandle = <700>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ built-in;
+ device_type = "ipic";
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
new file mode 100644
index 00000000000..3190774de1d
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -0,0 +1,187 @@
+/*
+ * MPC8349E-mITX-GP Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+/ {
+ model = "MPC8349EMITXGP";
+ compatible = "MPC834xMITXGP";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8349@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <8000>;
+ i-cache-size = <8000>;
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 10000000>;
+ };
+
+ soc8349@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <0>; // from bootloader
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <f 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ spi@7000 {
+ device_type = "spi";
+ compatible = "mpc83xx_spi";
+ reg = <7000 1000>;
+ interrupts = <10 8>;
+ interrupt-parent = <700>;
+ mode = <0>;
+ };
+
+ usb@23000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <700>;
+ interrupts = <26 2>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <24520>;
+
+ /* Vitesse 8201 */
+ ethernet-phy@1c {
+ linux,phandle = <245201c>;
+ interrupt-parent = <700>;
+ interrupts = <12 2>;
+ reg = <1c>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <20 8 21 8 22 8>;
+ interrupt-parent = <700>;
+ phy-handle = <245201c>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>; // from bootloader
+ interrupts = <9 8>;
+ interrupt-parent = <700>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>; // from bootloader
+ interrupts = <a 8>;
+ interrupt-parent = <700>;
+ };
+
+ pci@8600 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0F - PCI Slot */
+ 7800 0 0 1 700 14 8 /* PCI_INTA */
+ 7800 0 0 2 700 15 8 /* PCI_INTB */
+ >;
+ interrupt-parent = <700>;
+ interrupts = <43 8>;
+ bus-range = <1 1>;
+ ranges = <42000000 0 a0000000 a0000000 0 10000000
+ 02000000 0 b0000000 b0000000 0 10000000
+ 01000000 0 00000000 e3000000 0 01000000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8600 100>;
+ compatible = "83xx";
+ device_type = "pci";
+ };
+
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 8>;
+ interrupt-parent = <700>;
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000007e>;
+ descriptor-types-mask = <01010ebf>;
+ };
+
+ pic@700 {
+ linux,phandle = <700>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ built-in;
+ device_type = "ipic";
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index efceb343265..dc121b3cb4a 100644
--- a/arch/powerpc/boot/dts/mpc8349emds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -39,6 +39,11 @@
reg = <00000000 10000000>; // 256MB at 0
};
+ bcsr@e2400000 {
+ device_type = "board-control";
+ reg = <e2400000 8000>;
+ };
+
soc8349@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -103,6 +108,7 @@
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
+ dr_mode = "otg";
phy_type = "ulpi";
};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
new file mode 100644
index 00000000000..06d24653e42
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -0,0 +1,380 @@
+/*
+ * MPC8568E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/*
+/memreserve/ 00000000 1000000;
+*/
+
+/ {
+ model = "MPC8568EMDS";
+ compatible = "MPC85xxMDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8568@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 10000000>;
+ };
+
+ bcsr@f8000000 {
+ device_type = "board-control";
+ reg = <f8000000 8000>;
+ };
+
+ soc8568@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>;
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <31 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <32 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+
+ ethernet-phy@2 {
+ linux,phandle = <2452002>;
+ interrupt-parent = <40000>;
+ interrupts = <31 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@3 {
+ linux,phandle = <2452003>;
+ interrupt-parent = <40000>;
+ interrupts = <32 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452002>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ mac-address = [ 00 00 00 00 00 00];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452003>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 f000>;
+ interrupts = <1d 2>;
+ interrupt-parent = <40000>;
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <000000fe>;
+ descriptor-types-mask = <012b0ebf>;
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ par_io@e0100 {
+ reg = <e0100 100>;
+ device_type = "par_io";
+ num-ports = <7>;
+
+ ucc_pin@01 {
+ linux,phandle = <e010001>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 4 0a 1 0 2 0 /* TxD0 */
+ 4 09 1 0 2 0 /* TxD1 */
+ 4 08 1 0 2 0 /* TxD2 */
+ 4 07 1 0 2 0 /* TxD3 */
+ 4 17 1 0 2 0 /* TxD4 */
+ 4 16 1 0 2 0 /* TxD5 */
+ 4 15 1 0 2 0 /* TxD6 */
+ 4 14 1 0 2 0 /* TxD7 */
+ 4 0f 2 0 2 0 /* RxD0 */
+ 4 0e 2 0 2 0 /* RxD1 */
+ 4 0d 2 0 2 0 /* RxD2 */
+ 4 0c 2 0 2 0 /* RxD3 */
+ 4 1d 2 0 2 0 /* RxD4 */
+ 4 1c 2 0 2 0 /* RxD5 */
+ 4 1b 2 0 2 0 /* RxD6 */
+ 4 1a 2 0 2 0 /* RxD7 */
+ 4 0b 1 0 2 0 /* TX_EN */
+ 4 18 1 0 2 0 /* TX_ER */
+ 4 0f 2 0 2 0 /* RX_DV */
+ 4 1e 2 0 2 0 /* RX_ER */
+ 4 11 2 0 2 0 /* RX_CLK */
+ 4 13 1 0 2 0 /* GTX_CLK */
+ 1 1f 2 0 3 0>; /* GTX125 */
+ };
+ ucc_pin@02 {
+ linux,phandle = <e010002>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 5 0a 1 0 2 0 /* TxD0 */
+ 5 09 1 0 2 0 /* TxD1 */
+ 5 08 1 0 2 0 /* TxD2 */
+ 5 07 1 0 2 0 /* TxD3 */
+ 5 17 1 0 2 0 /* TxD4 */
+ 5 16 1 0 2 0 /* TxD5 */
+ 5 15 1 0 2 0 /* TxD6 */
+ 5 14 1 0 2 0 /* TxD7 */
+ 5 0f 2 0 2 0 /* RxD0 */
+ 5 0e 2 0 2 0 /* RxD1 */
+ 5 0d 2 0 2 0 /* RxD2 */
+ 5 0c 2 0 2 0 /* RxD3 */
+ 5 1d 2 0 2 0 /* RxD4 */
+ 5 1c 2 0 2 0 /* RxD5 */
+ 5 1b 2 0 2 0 /* RxD6 */
+ 5 1a 2 0 2 0 /* RxD7 */
+ 5 0b 1 0 2 0 /* TX_EN */
+ 5 18 1 0 2 0 /* TX_ER */
+ 5 10 2 0 2 0 /* RX_DV */
+ 5 1e 2 0 2 0 /* RX_ER */
+ 5 11 2 0 2 0 /* RX_CLK */
+ 5 13 1 0 2 0 /* GTX_CLK */
+ 1 1f 2 0 3 0 /* GTX125 */
+ 4 06 3 0 2 0 /* MDIO */
+ 4 05 1 0 2 0>; /* MDC */
+ };
+ };
+ };
+
+ qe@e0080000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ model = "QE";
+ ranges = <0 e0080000 00040000>;
+ reg = <e0080000 480>;
+ brg-frequency = <0>;
+ bus-frequency = <179A7B00>;
+
+ muram@10000 {
+ device_type = "muram";
+ ranges = <0 00010000 0000c000>;
+
+ data-only@0{
+ reg = <0 c000>;
+ };
+ };
+
+ spi@4c0 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <4c0 40>;
+ interrupts = <2>;
+ interrupt-parent = <80>;
+ mode = "cpu";
+ };
+
+ spi@500 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <500 40>;
+ interrupts = <1>;
+ interrupt-parent = <80>;
+ mode = "cpu";
+ };
+
+ ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <1>;
+ reg = <2000 200>;
+ interrupts = <20>;
+ interrupt-parent = <80>;
+ mac-address = [ 00 04 9f 00 23 23 ];
+ rx-clock = <0>;
+ tx-clock = <19>;
+ phy-handle = <212000>;
+ pio-handle = <e010001>;
+ };
+
+ ucc@3000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <2>;
+ reg = <3000 200>;
+ interrupts = <21>;
+ interrupt-parent = <80>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ rx-clock = <0>;
+ tx-clock = <14>;
+ phy-handle = <212001>;
+ pio-handle = <e010002>;
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2120 18>;
+ device_type = "mdio";
+ compatible = "ucc_geth_phy";
+
+ /* These are the same PHYs as on
+ * gianfar's MDIO bus */
+ ethernet-phy@00 {
+ linux,phandle = <212000>;
+ interrupt-parent = <40000>;
+ interrupts = <31 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ interface = <6>; //ENET_1000_GMII
+ };
+ ethernet-phy@01 {
+ linux,phandle = <212001>;
+ interrupt-parent = <40000>;
+ interrupts = <32 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ interface = <6>;
+ };
+ ethernet-phy@02 {
+ linux,phandle = <212002>;
+ interrupt-parent = <40000>;
+ interrupts = <31 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ interface = <6>; //ENET_1000_GMII
+ };
+ ethernet-phy@03 {
+ linux,phandle = <212003>;
+ interrupt-parent = <40000>;
+ interrupts = <32 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ interface = <6>; //ENET_1000_GMII
+ };
+ };
+
+ qeic@80 {
+ linux,phandle = <80>;
+ interrupt-controller;
+ device_type = "qeic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <80 80>;
+ built-in;
+ big-endian;
+ interrupts = <1e 2 1e 2>; //high:30 low:30
+ interrupt-parent = <40000>;
+ };
+
+ };
+};
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 405c1c90821..dde66a597a8 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Mon Jan 22 22:17:58 2007
+# Linux kernel version: 2.6.20-rc6
+# Sun Jan 28 23:13:56 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
-CONFIG_LOCALVERSION="-kuroboxHG"
+CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
@@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-# CONFIG_SECCOMP is not set
+CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
@@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
@@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
+CONFIG_IP_NF_MATCH_RECENT=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_LOG is not set
@@ -374,16 +375,17 @@ CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
@@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xffc00000
CONFIG_MTD_PHYSMAP_LEN=0x400000
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
#
# OneNAND Flash Device Drivers
@@ -696,7 +701,7 @@ CONFIG_ATA=y
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
+CONFIG_PATA_IT821X=y
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
@@ -763,11 +768,33 @@ CONFIG_TUN=m
#
# PHY device support
#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
-# CONFIG_NET_ETHERNET is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
@@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
#
@@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y
#
# HID Devices
#
-CONFIG_HID=y
+CONFIG_HID=m
#
# USB support
@@ -1115,7 +1143,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
@@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
@@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
+CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
@@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig
new file mode 100644
index 00000000000..f87523716c4
--- /dev/null
+++ b/arch/powerpc/configs/mpc8313_rdb_defconfig
@@ -0,0 +1,1409 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Wed Feb 7 22:08:04 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC_GEN550=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+CONFIG_MPC8313_RDB=y
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC8360E_PB is not set
+CONFIG_PPC_MPC831x=y
+# CONFIG_MPIC is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfe000000
+CONFIG_MTD_PHYSMAP_LEN=0x1000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_CICADA_PHY=y
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=y
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=y
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig
index 7902806429f..23d8964846e 100644
--- a/arch/powerpc/configs/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Fri Jan 26 00:19:02 2007
+# Linux kernel version: 2.6.20
+# Wed Feb 7 13:12:18 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
-# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
@@ -178,7 +178,6 @@ CONFIG_FSL_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -303,7 +302,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
@@ -523,6 +521,7 @@ CONFIG_SCSI_SPI_ATTRS=y
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
@@ -647,37 +646,7 @@ CONFIG_CICADA_PHY=y
#
# Ethernet (10 or 100Mbit)
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
@@ -693,7 +662,6 @@ CONFIG_E100=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
@@ -746,26 +714,7 @@ CONFIG_GFAR_NAPI=y
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
@@ -784,7 +733,7 @@ CONFIG_INPUT=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -887,7 +836,7 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
+CONFIG_SENSORS_PCF8574=y
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
@@ -901,7 +850,6 @@ CONFIG_I2C_MPC=y
# SPI support
#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
@@ -922,52 +870,8 @@ CONFIG_SPI_MPC83xx=y
#
# Hardware Monitoring support
#
-CONFIG_HWMON=y
+# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
@@ -983,7 +887,7 @@ CONFIG_HWMON=y
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -994,11 +898,6 @@ CONFIG_FIRMWARE_EDID=y
# CONFIG_SOUND is not set
#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -1023,10 +922,8 @@ CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
@@ -1058,25 +955,10 @@ CONFIG_USB_STORAGE=y
#
# USB Input Devices
#
-# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -1133,25 +1015,7 @@ CONFIG_USB_MON=y
#
# USB Gadget Support
#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
@@ -1273,8 +1137,11 @@ CONFIG_DNOTIFY=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -1340,7 +1207,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
@@ -1356,7 +1223,46 @@ CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
@@ -1388,27 +1294,9 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/mpc834x_itxgp_defconfig
new file mode 100644
index 00000000000..4aa666c9cb9
--- /dev/null
+++ b/arch/powerpc/configs/mpc834x_itxgp_defconfig
@@ -0,0 +1,1174 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Fri Feb 9 13:28:19 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC_GEN550=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC834x_SYS is not set
+CONFIG_MPC834x_ITX=y
+# CONFIG_MPC8360E_PB is not set
+CONFIG_MPC834x=y
+# CONFIG_MPIC is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfe000000
+CONFIG_MTD_PHYSMAP_LEN=0x800000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_CICADA_PHY=y
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+CONFIG_SENSORS_PCF8574=y
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=y
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig
index 9eaed3a3698..2e3f8efb6ab 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Fri Jan 26 00:19:27 2007
+# Linux kernel version: 2.6.20
+# Thu Feb 8 01:00:48 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
-# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
@@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y
#
# Platform support
#
+# CONFIG_MPC8313_RDB is not set
# CONFIG_MPC832x_MDS is not set
-CONFIG_MPC834x_SYS=y
+CONFIG_MPC834x_MDS=y
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC8360E_PB is not set
CONFIG_MPC834x=y
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig
new file mode 100644
index 00000000000..058e06d88bc
--- /dev/null
+++ b/arch/powerpc/configs/mpc8568mds_defconfig
@@ -0,0 +1,992 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc5
+# Wed Feb 7 23:54:25 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_85xx=y
+CONFIG_E500=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+CONFIG_MPC8568_MDS=y
+CONFIG_MPC85xx=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_BOOKE_WDT is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+
+#
+# Instrumentation Support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUGGER=y
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 93f21aaf7c8..3678997339d 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -18,6 +18,7 @@
#include <asm/io.h>
#include <asm/lmb.h>
#include <asm/processor.h>
+#include <asm/udbg.h>
#define NO_SCROLL
@@ -912,3 +913,11 @@ static unsigned char vga_font[cmapsz] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
};
+
+void __init udbg_init_btext(void)
+{
+ /* If btext is enabled, we might have a BAT setup for early display,
+ * thus we do enable some very basic udbg output
+ */
+ udbg_putc = btext_drawchar;
+}
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index dd17dffbf05..7ec4ac77c0f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -44,7 +44,7 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
-extern void __restore_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_pa6t(void);
extern void __restore_cpu_ppc970(void);
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index accb39d4991..a15d4b8cce4 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -32,8 +32,6 @@
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/ibm44x.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 66877bdfe0b..1f155d399d5 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
- li r6,0
+ mfspr r6,SPRN_MAS1
+ rlwinm r6,r6,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r6
tlbwe
/* Invalidate TLB1 */
@@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre
+ mfspr r8,SPRN_MAS1
+ rlwinm r8,r8,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r8
tlbwe
/* Invalidate TLB1 */
@@ -889,7 +892,6 @@ load_up_spe:
REST_GPR(9, r11)
REST_GPR(12, r11)
lwz r11,GPR11(r11)
- SYNC
rfi
/*
@@ -953,7 +955,6 @@ _GLOBAL(giveup_altivec)
_GLOBAL(giveup_spe)
mfmsr r5
oris r5,r5,MSR_SPE@h
- SYNC
mtmsr r5 /* enable use of SPE now */
isync
cmpi 0,r3,0
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 89f46f37792..325f490a10c 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -124,6 +124,10 @@ static int __init add_legacy_soc_port(struct device_node *np,
if (get_property(np, "clock-frequency", NULL) == NULL)
return -1;
+ /* if rtas uses this device, don't try to use it as well */
+ if (get_property(np, "used-by-rtas", NULL) != NULL)
+ return -1;
+
/* Get the address */
addrp = of_get_address(soc_dev, 0, NULL, NULL);
if (addrp == NULL)
@@ -334,6 +338,17 @@ void __init find_legacy_serial_ports(void)
of_node_put(tsi);
}
+ /* First fill our array with opb bus ports */
+ for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16750")) != NULL;) {
+ struct device_node *opb = of_get_parent(np);
+ if (opb && !strcmp(opb->type, "opb")) {
+ index = add_legacy_soc_port(np, np);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ of_node_put(opb);
+ }
+
#ifdef CONFIG_PCI
/* Next, try to locate PCI ports */
for (np = NULL; (np = of_find_all_nodes(np));) {
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 520ef42f642..4fb5938ce6d 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2117,11 +2117,92 @@ static void __init fixup_device_tree_pmac(void)
#define fixup_device_tree_pmac()
#endif
+#ifdef CONFIG_PPC_EFIKA
+/* The current fw of the Efika has a device tree needs quite a few
+ * fixups to be compliant with the mpc52xx bindings. It's currently
+ * unknown if it will ever be compliant (come on bPlan ...) so we do fixups.
+ * NOTE that we (barely) tolerate it because the EFIKA was out before
+ * the bindings were finished, for any new boards -> RTFM ! */
+
+struct subst_entry {
+ char *path;
+ char *property;
+ void *value;
+ int value_len;
+};
+
+static void __init fixup_device_tree_efika(void)
+{
+ /* Substitution table */
+ #define prop_cstr(x) x, sizeof(x)
+ int prop_sound_irq[3] = { 2, 2, 0 };
+ int prop_bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0,
+ 3,4,0, 3,5,0, 3,6,0, 3,7,0,
+ 3,8,0, 3,9,0, 3,10,0, 3,11,0,
+ 3,12,0, 3,13,0, 3,14,0, 3,15,0 };
+ struct subst_entry efika_subst_table[] = {
+ { "/", "device_type", prop_cstr("efika") },
+ { "/builtin", "compatible", prop_cstr("soc") },
+ { "/builtin/ata", "compatible", prop_cstr("mpc5200b-ata\0mpc5200-ata"), },
+ { "/builtin/bestcomm", "compatible", prop_cstr("mpc5200b-bestcomm\0mpc5200-bestcomm") },
+ { "/builtin/bestcomm", "interrupts", prop_bcomm_irq, sizeof(prop_bcomm_irq) },
+ { "/builtin/ethernet", "compatible", prop_cstr("mpc5200b-fec\0mpc5200-fec") },
+ { "/builtin/pic", "compatible", prop_cstr("mpc5200b-pic\0mpc5200-pic") },
+ { "/builtin/serial", "compatible", prop_cstr("mpc5200b-psc-uart\0mpc5200-psc-uart") },
+ { "/builtin/sound", "compatible", prop_cstr("mpc5200b-psc-ac97\0mpc5200-psc-ac97") },
+ { "/builtin/sound", "interrupts", prop_sound_irq, sizeof(prop_sound_irq) },
+ { "/builtin/sram", "compatible", prop_cstr("mpc5200b-sram\0mpc5200-sram") },
+ { "/builtin/sram", "device_type", prop_cstr("sram") },
+ {}
+ };
+ #undef prop_cstr
+
+ /* Vars */
+ u32 node;
+ char prop[64];
+ int rv, i;
+
+ /* Check if we're really running on a EFIKA */
+ node = call_prom("finddevice", 1, 1, ADDR("/"));
+ if (!PHANDLE_VALID(node))
+ return;
+
+ rv = prom_getprop(node, "model", prop, sizeof(prop));
+ if (rv == PROM_ERROR)
+ return;
+ if (strcmp(prop, "EFIKA5K2"))
+ return;
+
+ prom_printf("Applying EFIKA device tree fixups\n");
+
+ /* Process substitution table */
+ for (i=0; efika_subst_table[i].path; i++) {
+ struct subst_entry *se = &efika_subst_table[i];
+
+ node = call_prom("finddevice", 1, 1, ADDR(se->path));
+ if (!PHANDLE_VALID(node)) {
+ prom_printf("fixup_device_tree_efika: ",
+ "skipped entry %x - not found\n", i);
+ continue;
+ }
+
+ rv = prom_setprop(node, se->path, se->property,
+ se->value, se->value_len );
+ if (rv == PROM_ERROR)
+ prom_printf("fixup_device_tree_efika: ",
+ "skipped entry %x - setprop error\n", i);
+ }
+}
+#else
+#define fixup_device_tree_efika()
+#endif
+
static void __init fixup_device_tree(void)
{
fixup_device_tree_maple();
fixup_device_tree_chrp();
fixup_device_tree_pmac();
+ fixup_device_tree_efika();
}
static void __init prom_find_boot_cpu(void)
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 6a19fa40dce..44a6a3c47fe 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -116,12 +116,8 @@ unsigned long __init early_init(unsigned long dt_ptr)
*/
void __init machine_init(unsigned long dt_ptr, unsigned long phys)
{
- /* If btext is enabled, we might have a BAT setup for early display,
- * thus we do enable some very basic udbg output
- */
-#ifdef CONFIG_BOOTX_TEXT
- udbg_putc = btext_drawchar;
-#endif
+ /* Enable early debugging if any specified (see udbg.h) */
+ udbg_early_init();
/* Do some early initialization based on the flat device tree */
early_init_devtree(__va(dt_ptr));
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0e8beca460a..924d692bc8f 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -78,29 +78,6 @@ int smt_enabled_at_boot = 1;
static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
-#ifdef CONFIG_MPIC
-int __init smp_mpic_probe(void)
-{
- int nr_cpus;
-
- DBG("smp_mpic_probe()...\n");
-
- nr_cpus = cpus_weight(cpu_possible_map);
-
- DBG("nr_cpus: %d\n", nr_cpus);
-
- if (nr_cpus > 1)
- mpic_request_ipis();
-
- return nr_cpus;
-}
-
-void __devinit smp_mpic_setup_cpu(int cpu)
-{
- mpic_setup_this_cpu();
-}
-#endif /* CONFIG_MPIC */
-
#ifdef CONFIG_PPC64
void __devinit smp_generic_kick_cpu(int nr)
{
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 194a93eeb3e..7e0971868fc 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -49,6 +49,8 @@ void __init udbg_early_init(void)
udbg_init_debug_beat();
#elif defined(CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE)
udbg_init_pas_realmode();
+#elif defined(CONFIG_BOOTX_TEXT)
+ udbg_init_btext();
#endif
}
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 50149ec6efa..e46c31b3664 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -49,24 +49,23 @@
/* Max supported size for symbol names */
#define MAX_SYMNAME 64
-#define VDSO32_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2)
-#define VDSO64_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2)
-
extern char vdso32_start, vdso32_end;
static void *vdso32_kbase = &vdso32_start;
-unsigned int vdso32_pages;
-static struct page *vdso32_pagelist[VDSO32_MAXPAGES];
+static unsigned int vdso32_pages;
+static struct page **vdso32_pagelist;
unsigned long vdso32_sigtramp;
unsigned long vdso32_rt_sigtramp;
#ifdef CONFIG_PPC64
extern char vdso64_start, vdso64_end;
static void *vdso64_kbase = &vdso64_start;
-unsigned int vdso64_pages;
-static struct page *vdso64_pagelist[VDSO64_MAXPAGES];
+static unsigned int vdso64_pages;
+static struct page **vdso64_pagelist;
unsigned long vdso64_rt_sigtramp;
#endif /* CONFIG_PPC64 */
+static int vdso_ready;
+
/*
* The vdso data page (aka. systemcfg for old ppc64 fans) is here.
* Once the early boot kernel code no longer needs to muck around
@@ -182,6 +181,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm,
unsigned long vdso_base;
int rc;
+ if (!vdso_ready)
+ return 0;
+
#ifdef CONFIG_PPC64
if (test_thread_flag(TIF_32BIT)) {
vdso_pagelist = vdso32_pagelist;
@@ -661,7 +663,7 @@ static void __init vdso_setup_syscall_map(void)
}
-void __init vdso_init(void)
+static int __init vdso_init(void)
{
int i;
@@ -716,11 +718,13 @@ void __init vdso_init(void)
#ifdef CONFIG_PPC64
vdso64_pages = 0;
#endif
- return;
+ return 0;
}
/* Make sure pages are in the correct state */
- BUG_ON(vdso32_pages + 2 > VDSO32_MAXPAGES);
+ vdso32_pagelist = kzalloc(sizeof(struct page *) * (vdso32_pages + 2),
+ GFP_KERNEL);
+ BUG_ON(vdso32_pagelist == NULL);
for (i = 0; i < vdso32_pages; i++) {
struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE);
ClearPageReserved(pg);
@@ -731,7 +735,9 @@ void __init vdso_init(void)
vdso32_pagelist[i] = NULL;
#ifdef CONFIG_PPC64
- BUG_ON(vdso64_pages + 2 > VDSO64_MAXPAGES);
+ vdso64_pagelist = kzalloc(sizeof(struct page *) * (vdso64_pages + 2),
+ GFP_KERNEL);
+ BUG_ON(vdso64_pagelist == NULL);
for (i = 0; i < vdso64_pages; i++) {
struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE);
ClearPageReserved(pg);
@@ -743,7 +749,13 @@ void __init vdso_init(void)
#endif /* CONFIG_PPC64 */
get_page(virt_to_page(vdso_data));
+
+ smp_wmb();
+ vdso_ready = 1;
+
+ return 0;
}
+arch_initcall(vdso_init);
int in_gate_area_no_task(unsigned long addr)
{
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 77b4637097e..52f397c108a 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -384,9 +384,6 @@ void __init mem_init(void)
initsize >> 10);
mem_init_done = 1;
-
- /* Initialize the vDSO */
- vdso_init();
}
/*
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index bd02272bcb0..c284bdac994 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -295,7 +295,7 @@ void __init mapin_ram(void)
}
/* is x a power of 4? */
-#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1))
+#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)
/*
* Set up a mapping for a block of I/O.
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 2eb15f38810..e08e1d7b3dc 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -39,10 +39,17 @@
#include "../platforms/cell/interrupt.h"
#define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */
+#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying
+ * PPU_CYCLES event
+ */
#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */
-#define NUM_THREADS 2
-#define VIRT_CNTR_SW_TIME_NS 100000000 // 0.5 seconds
+#define NUM_THREADS 2 /* number of physical threads in
+ * physical processor
+ */
+#define NUM_TRACE_BUS_WORDS 4
+#define NUM_INPUT_BUS_WORDS 2
+
struct pmc_cntrl_data {
unsigned long vcntr;
@@ -58,7 +65,7 @@ struct pmc_cntrl_data {
struct pm_signal {
u16 cpu; /* Processor to modify */
u16 sub_unit; /* hw subunit this applies to (if applicable) */
- u16 signal_group; /* Signal Group to Enable/Disable */
+ short int signal_group; /* Signal Group to Enable/Disable */
u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event
* Bus Word(s) (bitmask)
*/
@@ -93,7 +100,6 @@ static struct {
u32 pm07_cntrl[NR_PHYS_CTRS];
} pm_regs;
-
#define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12)
#define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4)
#define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8)
@@ -101,7 +107,6 @@ static struct {
#define GET_COUNT_CYCLES(x) (x & 0x00000001)
#define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2)
-
static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values);
static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS];
@@ -129,8 +134,8 @@ static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED;
static u32 ctr_enabled;
-static unsigned char trace_bus[4];
-static unsigned char input_bus[2];
+static unsigned char trace_bus[NUM_TRACE_BUS_WORDS];
+static unsigned char input_bus[NUM_INPUT_BUS_WORDS];
/*
* Firmware interface functions
@@ -177,25 +182,40 @@ static void pm_rtas_reset_signals(u32 node)
static void pm_rtas_activate_signals(u32 node, u32 count)
{
int ret;
- int j;
+ int i, j;
struct pm_signal pm_signal_local[NR_PHYS_CTRS];
+ /* There is no debug setup required for the cycles event.
+ * Note that only events in the same group can be used.
+ * Otherwise, there will be conflicts in correctly routing
+ * the signals on the debug bus. It is the responsiblity
+ * of the OProfile user tool to check the events are in
+ * the same group.
+ */
+ i = 0;
for (j = 0; j < count; j++) {
- /* fw expects physical cpu # */
- pm_signal_local[j].cpu = node;
- pm_signal_local[j].signal_group = pm_signal[j].signal_group;
- pm_signal_local[j].bus_word = pm_signal[j].bus_word;
- pm_signal_local[j].sub_unit = pm_signal[j].sub_unit;
- pm_signal_local[j].bit = pm_signal[j].bit;
+ if (pm_signal[j].signal_group != PPU_CYCLES_GRP_NUM) {
+
+ /* fw expects physical cpu # */
+ pm_signal_local[i].cpu = node;
+ pm_signal_local[i].signal_group
+ = pm_signal[j].signal_group;
+ pm_signal_local[i].bus_word = pm_signal[j].bus_word;
+ pm_signal_local[i].sub_unit = pm_signal[j].sub_unit;
+ pm_signal_local[i].bit = pm_signal[j].bit;
+ i++;
+ }
}
- ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE,
- pm_signal_local,
- count * sizeof(struct pm_signal));
+ if (i != 0) {
+ ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE,
+ pm_signal_local,
+ i * sizeof(struct pm_signal));
- if (ret)
- printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ if (ret)
+ printk(KERN_WARNING "%s: rtas returned: %d\n",
+ __FUNCTION__, ret);
+ }
}
/*
@@ -212,7 +232,7 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask)
/* Special Event: Count all cpu cycles */
pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES;
p = &(pm_signal[ctr]);
- p->signal_group = 21;
+ p->signal_group = PPU_CYCLES_GRP_NUM;
p->bus_word = 1;
p->sub_unit = 0;
p->bit = 0;
@@ -232,13 +252,21 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask)
p->signal_group = event / 100;
p->bus_word = bus_word;
- p->sub_unit = unit_mask & 0x0000f000;
+ p->sub_unit = (unit_mask & 0x0000f000) >> 12;
pm_regs.pm07_cntrl[ctr] = 0;
pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles);
pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity);
pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control);
+ /* Some of the islands signal selection is based on 64 bit words.
+ * The debug bus words are 32 bits, the input words to the performance
+ * counters are defined as 32 bits. Need to convert the 64 bit island
+ * specification to the appropriate 32 input bit and bus word for the
+ * performance counter event selection. See the CELL Performance
+ * monitoring signals manual and the Perf cntr hardware descriptions
+ * for the details.
+ */
if (input_control == 0) {
if (signal_bit > 31) {
signal_bit -= 32;
@@ -259,12 +287,12 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask)
p->bit = signal_bit;
}
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) {
if (bus_word & (1 << i)) {
pm_regs.debug_bus_control |=
(bus_type << (31 - (2 * i) + 1));
- for (j = 0; j < 2; j++) {
+ for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) {
if (input_bus[j] == 0xff) {
input_bus[j] = i;
pm_regs.group_control |=
@@ -278,52 +306,58 @@ out:
;
}
-static void write_pm_cntrl(int cpu, struct pm_cntrl *pm_cntrl)
+static void write_pm_cntrl(int cpu)
{
- /* Oprofile will use 32 bit counters, set bits 7:10 to 0 */
+ /* Oprofile will use 32 bit counters, set bits 7:10 to 0
+ * pmregs.pm_cntrl is a global
+ */
+
u32 val = 0;
- if (pm_cntrl->enable == 1)
+ if (pm_regs.pm_cntrl.enable == 1)
val |= CBE_PM_ENABLE_PERF_MON;
- if (pm_cntrl->stop_at_max == 1)
+ if (pm_regs.pm_cntrl.stop_at_max == 1)
val |= CBE_PM_STOP_AT_MAX;
- if (pm_cntrl->trace_mode == 1)
- val |= CBE_PM_TRACE_MODE_SET(pm_cntrl->trace_mode);
+ if (pm_regs.pm_cntrl.trace_mode == 1)
+ val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode);
- if (pm_cntrl->freeze == 1)
+ if (pm_regs.pm_cntrl.freeze == 1)
val |= CBE_PM_FREEZE_ALL_CTRS;
/* Routine set_count_mode must be called previously to set
* the count mode based on the user selection of user and kernel.
*/
- val |= CBE_PM_COUNT_MODE_SET(pm_cntrl->count_mode);
+ val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode);
cbe_write_pm(cpu, pm_control, val);
}
static inline void
-set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl)
+set_count_mode(u32 kernel, u32 user)
{
/* The user must specify user and kernel if they want them. If
- * neither is specified, OProfile will count in hypervisor mode
+ * neither is specified, OProfile will count in hypervisor mode.
+ * pm_regs.pm_cntrl is a global
*/
if (kernel) {
if (user)
- pm_cntrl->count_mode = CBE_COUNT_ALL_MODES;
+ pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES;
else
- pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE;
+ pm_regs.pm_cntrl.count_mode =
+ CBE_COUNT_SUPERVISOR_MODE;
} else {
if (user)
- pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE;
+ pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE;
else
- pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE;
+ pm_regs.pm_cntrl.count_mode =
+ CBE_COUNT_HYPERVISOR_MODE;
}
}
static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl)
{
- pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1);
+ pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE;
cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]);
}
@@ -365,6 +399,14 @@ static void cell_virtual_cntr(unsigned long data)
hdw_thread = 1 ^ hdw_thread;
next_hdw_thread = hdw_thread;
+ for (i = 0; i < num_counters; i++)
+ /* There are some per thread events. Must do the
+ * set event, for the thread that is being started
+ */
+ set_pm_event(i,
+ pmc_cntrl[next_hdw_thread][i].evnts,
+ pmc_cntrl[next_hdw_thread][i].masks);
+
/* The following is done only once per each node, but
* we need cpu #, not node #, to pass to the cbe_xxx functions.
*/
@@ -385,12 +427,13 @@ static void cell_virtual_cntr(unsigned long data)
== 0xFFFFFFFF)
/* If the cntr value is 0xffffffff, we must
* reset that to 0xfffffff0 when the current
- * thread is restarted. This will generate a new
- * interrupt and make sure that we never restore
- * the counters to the max value. If the counters
- * were restored to the max value, they do not
- * increment and no interrupts are generated. Hence
- * no more samples will be collected on that cpu.
+ * thread is restarted. This will generate a
+ * new interrupt and make sure that we never
+ * restore the counters to the max value. If
+ * the counters were restored to the max value,
+ * they do not increment and no interrupts are
+ * generated. Hence no more samples will be
+ * collected on that cpu.
*/
cbe_write_ctr(cpu, i, 0xFFFFFFF0);
else
@@ -410,9 +453,6 @@ static void cell_virtual_cntr(unsigned long data)
* Must do the set event, enable_cntr
* for each cpu.
*/
- set_pm_event(i,
- pmc_cntrl[next_hdw_thread][i].evnts,
- pmc_cntrl[next_hdw_thread][i].masks);
enable_ctr(cpu, i,
pm_regs.pm07_cntrl);
} else {
@@ -465,8 +505,7 @@ cell_reg_setup(struct op_counter_config *ctr,
pm_regs.pm_cntrl.trace_mode = 0;
pm_regs.pm_cntrl.freeze = 1;
- set_count_mode(sys->enable_kernel, sys->enable_user,
- &pm_regs.pm_cntrl);
+ set_count_mode(sys->enable_kernel, sys->enable_user);
/* Setup the thread 0 events */
for (i = 0; i < num_ctrs; ++i) {
@@ -498,10 +537,10 @@ cell_reg_setup(struct op_counter_config *ctr,
pmc_cntrl[1][i].vcntr = i;
}
- for (i = 0; i < 4; i++)
+ for (i = 0; i < NUM_TRACE_BUS_WORDS; i++)
trace_bus[i] = 0xff;
- for (i = 0; i < 2; i++)
+ for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
input_bus[i] = 0xff;
/* Our counters count up, and "count" refers to
@@ -560,7 +599,7 @@ static void cell_cpu_setup(struct op_counter_config *cntr)
cbe_write_pm(cpu, pm_start_stop, 0);
cbe_write_pm(cpu, group_control, pm_regs.group_control);
cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control);
- write_pm_cntrl(cpu, &pm_regs.pm_cntrl);
+ write_pm_cntrl(cpu);
for (i = 0; i < num_counters; ++i) {
if (ctr_enabled & (1 << i)) {
@@ -602,7 +641,7 @@ static void cell_global_start(struct op_counter_config *ctr)
}
}
- cbe_clear_pm_interrupts(cpu);
+ cbe_get_and_clear_pm_interrupts(cpu);
cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
cbe_enable_pm(cpu);
}
@@ -672,7 +711,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr)
cbe_disable_pm(cpu);
- interrupt_mask = cbe_clear_pm_interrupts(cpu);
+ interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu);
/* If the interrupt mask has been cleared, then the virt cntr
* has cleared the interrupt. When the thread that generated
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index 795b713ec9e..07cdbcacf15 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -6,5 +6,5 @@ obj-y += mpc52xx_pic.o mpc52xx_common.o
obj-$(CONFIG_PCI) += mpc52xx_pci.o
endif
-obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o
+obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
diff --git a/arch/powerpc/platforms/52xx/efika-pci.c b/arch/powerpc/platforms/52xx/efika-pci.c
deleted file mode 100644
index 62e05b2a922..00000000000
--- a/arch/powerpc/platforms/52xx/efika-pci.c
+++ /dev/null
@@ -1,119 +0,0 @@
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/sections.h>
-#include <asm/pci-bridge.h>
-#include <asm/rtas.h>
-
-#include "efika.h"
-
-#ifdef CONFIG_PCI
-/*
- * Access functions for PCI config space using RTAS calls.
- */
-static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 * val)
-{
- struct pci_controller *hose = bus->sysdata;
- unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
- | (((bus->number - hose->first_busno) & 0xff) << 16)
- | (hose->index << 24);
- int ret = -1;
- int rval;
-
- rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
- *val = ret;
- return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 val)
-{
- struct pci_controller *hose = bus->sysdata;
- unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
- | (((bus->number - hose->first_busno) & 0xff) << 16)
- | (hose->index << 24);
- int rval;
-
- rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
- addr, len, val);
- return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops rtas_pci_ops = {
- rtas_read_config,
- rtas_write_config
-};
-
-void __init efika_pcisetup(void)
-{
- const int *bus_range;
- int len;
- struct pci_controller *hose;
- struct device_node *root;
- struct device_node *pcictrl;
-
- root = of_find_node_by_path("/");
- if (root == NULL) {
- printk(KERN_WARNING EFIKA_PLATFORM_NAME
- ": Unable to find the root node\n");
- return;
- }
-
- for (pcictrl = NULL;;) {
- pcictrl = of_get_next_child(root, pcictrl);
- if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0))
- break;
- }
-
- of_node_put(root);
-
- if (pcictrl == NULL) {
- printk(KERN_WARNING EFIKA_PLATFORM_NAME
- ": Unable to find the PCI bridge node\n");
- return;
- }
-
- bus_range = get_property(pcictrl, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING EFIKA_PLATFORM_NAME
- ": Can't get bus-range for %s\n", pcictrl->full_name);
- return;
- }
-
- if (bus_range[1] == bus_range[0])
- printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d",
- bus_range[0]);
- else
- printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d",
- bus_range[0], bus_range[1]);
- printk(" controlled by %s\n", pcictrl->full_name);
- printk("\n");
-
- hose = pcibios_alloc_controller();
- if (!hose) {
- printk(KERN_WARNING EFIKA_PLATFORM_NAME
- ": Can't allocate PCI controller structure for %s\n",
- pcictrl->full_name);
- return;
- }
-
- hose->arch_data = of_node_get(pcictrl);
- hose->first_busno = bus_range[0];
- hose->last_busno = bus_range[1];
- hose->ops = &rtas_pci_ops;
-
- pci_process_bridge_OF_ranges(hose, pcictrl, 0);
-}
-
-#else
-void __init efika_pcisetup(void)
-{}
-#endif
diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c
deleted file mode 100644
index 110c980ed1e..00000000000
--- a/arch/powerpc/platforms/52xx/efika-setup.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- *
- * Efika 5K2 platform setup
- * Some code really inspired from the lite5200b platform.
- *
- * Copyright (C) 2006 bplan GmbH
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/utsrelease.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-
-#include <asm/pgtable.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/rtas.h>
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
-#include <asm/mpc52xx.h>
-
-#include "efika.h"
-
-static void efika_show_cpuinfo(struct seq_file *m)
-{
- struct device_node *root;
- const char *revision = NULL;
- const char *codegendescription = NULL;
- const char *codegenvendor = NULL;
-
- root = of_find_node_by_path("/");
- if (root) {
- revision = get_property(root, "revision", NULL);
- codegendescription =
- get_property(root, "CODEGEN,description", NULL);
- codegenvendor = get_property(root, "CODEGEN,vendor", NULL);
-
- of_node_put(root);
- }
-
- if (codegendescription)
- seq_printf(m, "machine\t\t: %s\n", codegendescription);
- else
- seq_printf(m, "machine\t\t: Efika\n");
-
- if (revision)
- seq_printf(m, "revision\t: %s\n", revision);
-
- if (codegenvendor)
- seq_printf(m, "vendor\t\t: %s\n", codegenvendor);
-
- of_node_put(root);
-}
-
-static void __init efika_setup_arch(void)
-{
- rtas_initialize();
-
-#ifdef CONFIG_BLK_DEV_INITRD
- initrd_below_start_ok = 1;
-
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
- ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
-
- efika_pcisetup();
-
- if (ppc_md.progress)
- ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0);
-}
-
-static void __init efika_init(void)
-{
- struct device_node *np;
- struct device_node *cnp = NULL;
- const u32 *base;
-
- /* Find every child of the SOC node and add it to of_platform */
- np = of_find_node_by_name(NULL, "builtin");
- if (np) {
- char name[BUS_ID_SIZE];
- while ((cnp = of_get_next_child(np, cnp))) {
- strcpy(name, cnp->name);
-
- base = get_property(cnp, "reg", NULL);
- if (base == NULL)
- continue;
-
- snprintf(name+strlen(name), BUS_ID_SIZE, "@%x", *base);
- of_platform_device_create(cnp, name, NULL);
-
- printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name);
- }
- }
-
- if (ppc_md.progress)
- ppc_md.progress(" Have fun with your Efika! ", 0x7777);
-}
-
-static int __init efika_probe(void)
-{
- char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "model", NULL);
-
- if (model == NULL)
- return 0;
- if (strcmp(model, "EFIKA5K2"))
- return 0;
-
- ISA_DMA_THRESHOLD = ~0L;
- DMA_MODE_READ = 0x44;
- DMA_MODE_WRITE = 0x48;
-
- return 1;
-}
-
-define_machine(efika)
-{
- .name = EFIKA_PLATFORM_NAME,
- .probe = efika_probe,
- .setup_arch = efika_setup_arch,
- .init = efika_init,
- .show_cpuinfo = efika_show_cpuinfo,
- .init_IRQ = mpc52xx_init_irq,
- .get_irq = mpc52xx_get_irq,
- .restart = rtas_restart,
- .power_off = rtas_power_off,
- .halt = rtas_halt,
- .set_rtc_time = rtas_set_rtc_time,
- .get_rtc_time = rtas_get_rtc_time,
- .progress = rtas_progress,
- .get_boot_time = rtas_get_boot_time,
- .calibrate_decr = generic_calibrate_decr,
- .phys_mem_access_prot = pci_phys_mem_access_prot,
-};
diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c
new file mode 100644
index 00000000000..8de03411668
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/efika.c
@@ -0,0 +1,243 @@
+/*
+ * Efika 5K2 platform code
+ * Some code really inspired from the lite5200b platform.
+ *
+ * Copyright (C) 2006 bplan GmbH
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/utsrelease.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/timer.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#include <asm/mpc52xx.h>
+
+
+#define EFIKA_PLATFORM_NAME "Efika"
+
+
+/* ------------------------------------------------------------------------ */
+/* PCI accesses thru RTAS */
+/* ------------------------------------------------------------------------ */
+
+#ifdef CONFIG_PCI
+
+/*
+ * Access functions for PCI config space using RTAS calls.
+ */
+static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 * val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+ | (((bus->number - hose->first_busno) & 0xff) << 16)
+ | (hose->index << 24);
+ int ret = -1;
+ int rval;
+
+ rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
+ *val = ret;
+ return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+ | (((bus->number - hose->first_busno) & 0xff) << 16)
+ | (hose->index << 24);
+ int rval;
+
+ rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
+ addr, len, val);
+ return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rtas_pci_ops = {
+ rtas_read_config,
+ rtas_write_config
+};
+
+
+void __init efika_pcisetup(void)
+{
+ const int *bus_range;
+ int len;
+ struct pci_controller *hose;
+ struct device_node *root;
+ struct device_node *pcictrl;
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Unable to find the root node\n");
+ return;
+ }
+
+ for (pcictrl = NULL;;) {
+ pcictrl = of_get_next_child(root, pcictrl);
+ if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0))
+ break;
+ }
+
+ of_node_put(root);
+
+ if (pcictrl == NULL) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Unable to find the PCI bridge node\n");
+ return;
+ }
+
+ bus_range = get_property(pcictrl, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Can't get bus-range for %s\n", pcictrl->full_name);
+ return;
+ }
+
+ if (bus_range[1] == bus_range[0])
+ printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d",
+ bus_range[0]);
+ else
+ printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d",
+ bus_range[0], bus_range[1]);
+ printk(" controlled by %s\n", pcictrl->full_name);
+ printk("\n");
+
+ hose = pcibios_alloc_controller();
+ if (!hose) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Can't allocate PCI controller structure for %s\n",
+ pcictrl->full_name);
+ return;
+ }
+
+ hose->arch_data = of_node_get(pcictrl);
+ hose->first_busno = bus_range[0];
+ hose->last_busno = bus_range[1];
+ hose->ops = &rtas_pci_ops;
+
+ pci_process_bridge_OF_ranges(hose, pcictrl, 0);
+}
+
+#else
+void __init efika_pcisetup(void)
+{}
+#endif
+
+
+
+/* ------------------------------------------------------------------------ */
+/* Platform setup */
+/* ------------------------------------------------------------------------ */
+
+static void efika_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *root;
+ const char *revision = NULL;
+ const char *codegendescription = NULL;
+ const char *codegenvendor = NULL;
+
+ root = of_find_node_by_path("/");
+ if (!root)
+ return;
+
+ revision = get_property(root, "revision", NULL);
+ codegendescription =
+ get_property(root, "CODEGEN,description", NULL);
+ codegenvendor = get_property(root, "CODEGEN,vendor", NULL);
+
+ if (codegendescription)
+ seq_printf(m, "machine\t\t: %s\n", codegendescription);
+ else
+ seq_printf(m, "machine\t\t: Efika\n");
+
+ if (revision)
+ seq_printf(m, "revision\t: %s\n", revision);
+
+ if (codegenvendor)
+ seq_printf(m, "vendor\t\t: %s\n", codegenvendor);
+
+ of_node_put(root);
+}
+
+static void __init efika_setup_arch(void)
+{
+ rtas_initialize();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ initrd_below_start_ok = 1;
+
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+ ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
+
+ efika_pcisetup();
+
+ if (ppc_md.progress)
+ ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0);
+}
+
+static int __init efika_probe(void)
+{
+ char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "model", NULL);
+
+ if (model == NULL)
+ return 0;
+ if (strcmp(model, "EFIKA5K2"))
+ return 0;
+
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 0x44;
+ DMA_MODE_WRITE = 0x48;
+
+ return 1;
+}
+
+define_machine(efika)
+{
+ .name = EFIKA_PLATFORM_NAME,
+ .probe = efika_probe,
+ .setup_arch = efika_setup_arch,
+ .init = mpc52xx_declare_of_platform_devices,
+ .show_cpuinfo = efika_show_cpuinfo,
+ .init_IRQ = mpc52xx_init_irq,
+ .get_irq = mpc52xx_get_irq,
+ .restart = rtas_restart,
+ .power_off = rtas_power_off,
+ .halt = rtas_halt,
+ .set_rtc_time = rtas_set_rtc_time,
+ .get_rtc_time = rtas_get_rtc_time,
+ .progress = rtas_progress,
+ .get_boot_time = rtas_get_boot_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .phys_mem_access_prot = pci_phys_mem_access_prot,
+};
+
diff --git a/arch/powerpc/platforms/52xx/efika.h b/arch/powerpc/platforms/52xx/efika.h
deleted file mode 100644
index 2f060fd097d..00000000000
--- a/arch/powerpc/platforms/52xx/efika.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Efika 5K2 platform setup - Header file
- *
- * Copyright (C) 2006 bplan GmbH
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#ifndef __ARCH_POWERPC_EFIKA__
-#define __ARCH_POWERPC_EFIKA__
-
-#define EFIKA_PLATFORM_NAME "Efika"
-
-extern void __init efika_pcisetup(void);
-
-#endif
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index cdb16bfa6ca..cc3b40de21d 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -51,13 +51,13 @@
*/
static void __init
-lite52xx_setup_cpu(void)
+lite5200_setup_cpu(void)
{
struct mpc52xx_gpio __iomem *gpio;
u32 port_config;
/* Map zones */
- gpio = mpc52xx_find_and_map("mpc52xx-gpio");
+ gpio = mpc52xx_find_and_map("mpc5200-gpio");
if (!gpio) {
printk(KERN_ERR __FILE__ ": "
"Error while mapping GPIO register for port config. "
@@ -85,12 +85,12 @@ error:
iounmap(gpio);
}
-static void __init lite52xx_setup_arch(void)
+static void __init lite5200_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
- ppc_md.progress("lite52xx_setup_arch()", 0);
+ ppc_md.progress("lite5200_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np) {
@@ -105,7 +105,7 @@ static void __init lite52xx_setup_arch(void)
/* CPU & Port mux setup */
mpc52xx_setup_cpu(); /* Generic */
- lite52xx_setup_cpu(); /* Platorm specific */
+ lite5200_setup_cpu(); /* Platorm specific */
#ifdef CONFIG_PCI
np = of_find_node_by_type(np, "pci");
@@ -126,7 +126,7 @@ static void __init lite52xx_setup_arch(void)
}
-void lite52xx_show_cpuinfo(struct seq_file *m)
+void lite5200_show_cpuinfo(struct seq_file *m)
{
struct device_node* np = of_find_all_nodes(NULL);
const char *model = NULL;
@@ -143,25 +143,26 @@ void lite52xx_show_cpuinfo(struct seq_file *m)
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init lite52xx_probe(void)
+static int __init lite5200_probe(void)
{
unsigned long node = of_get_flat_dt_root();
const char *model = of_get_flat_dt_prop(node, "model", NULL);
- if (!of_flat_dt_is_compatible(node, "lite52xx"))
+ if (!of_flat_dt_is_compatible(node, "fsl,lite5200") &&
+ !of_flat_dt_is_compatible(node, "fsl,lite5200b"))
return 0;
- pr_debug("%s board w/ mpc52xx found\n", model ? model : "unknown");
+ pr_debug("%s board found\n", model ? model : "unknown");
return 1;
}
-define_machine(lite52xx) {
- .name = "lite52xx",
- .probe = lite52xx_probe,
- .setup_arch = lite52xx_setup_arch,
+define_machine(lite5200) {
+ .name = "lite5200",
+ .probe = lite5200_probe,
+ .setup_arch = lite5200_setup_arch,
.init = mpc52xx_declare_of_platform_devices,
.init_IRQ = mpc52xx_init_irq,
.get_irq = mpc52xx_get_irq,
- .show_cpuinfo = lite52xx_show_cpuinfo,
+ .show_cpuinfo = lite5200_show_cpuinfo,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index cc40889074b..ed0cb694aea 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -83,8 +83,8 @@ mpc52xx_setup_cpu(void)
struct mpc52xx_xlb __iomem *xlb;
/* Map zones */
- cdm = mpc52xx_find_and_map("mpc52xx-cdm");
- xlb = mpc52xx_find_and_map("mpc52xx-xlb");
+ cdm = mpc52xx_find_and_map("mpc5200-cdm");
+ xlb = mpc52xx_find_and_map("mpc5200-xlb");
if (!cdm || !xlb) {
printk(KERN_ERR __FILE__ ": "
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index cd91a6c3aaf..c75192567e5 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -383,16 +383,16 @@ void __init mpc52xx_init_irq(void)
struct device_node *picnode;
/* Remap the necessary zones */
- picnode = of_find_compatible_node(NULL, NULL, "mpc52xx-pic");
+ picnode = of_find_compatible_node(NULL, NULL, "mpc5200-pic");
- intr = mpc52xx_find_and_map("mpc52xx-pic");
+ intr = mpc52xx_find_and_map("mpc5200-pic");
if (!intr)
- panic(__FILE__ ": find_and_map failed on 'mpc52xx-pic'. "
+ panic(__FILE__ ": find_and_map failed on 'mpc5200-pic'. "
"Check node !");
- sdma = mpc52xx_find_and_map("mpc52xx-bestcomm");
+ sdma = mpc52xx_find_and_map("mpc5200-bestcomm");
if (!sdma)
- panic(__FILE__ ": find_and_map failed on 'mpc52xx-bestcomm'. "
+ panic(__FILE__ ": find_and_map failed on 'mpc5200-bestcomm'. "
"Check node !");
/* Disable all interrupt sources. */
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index edcd5b875b6..1aea1e69ff3 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -3,7 +3,13 @@ menu "Platform support"
choice
prompt "Machine Type"
- default MPC834x_SYS
+ default MPC834x_MDS
+
+config MPC8313_RDB
+ bool "Freescale MPC8313 RDB"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the MPC8313 RDB board.
config MPC832x_MDS
bool "Freescale MPC832x MDS"
@@ -12,13 +18,13 @@ config MPC832x_MDS
help
This option enables support for the MPC832x MDS evaluation board.
-config MPC834x_SYS
- bool "Freescale MPC834x SYS"
+config MPC834x_MDS
+ bool "Freescale MPC834x MDS"
select DEFAULT_UIMAGE
help
- This option enables support for the MPC 834x SYS evaluation board.
+ This option enables support for the MPC 834x MDS evaluation board.
- Be aware that PCI buses can only function when SYS board is plugged
+ Be aware that PCI buses can only function when MDS board is plugged
into the PIB (Platform IO Board) board from Freescale which provide
3 PCI slots. The PIBs PCI initialization is the bootloader's
responsibility.
@@ -41,6 +47,12 @@ config MPC8360E_PB
endchoice
+config PPC_MPC831x
+ bool
+ select PPC_UDBG_16550
+ select PPC_INDIRECT_PCI
+ default y if MPC8313_RDB
+
config PPC_MPC832x
bool
select PPC_UDBG_16550
@@ -51,7 +63,7 @@ config MPC834x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
- default y if MPC834x_SYS || MPC834x_ITX
+ default y if MPC834x_MDS || MPC834x_ITX
config PPC_MPC836x
bool
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index f1aa7e24a93..6c8199c4c38 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -3,7 +3,8 @@
#
obj-y := misc.o
obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o
+obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o
+obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o
obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c
new file mode 100644
index 00000000000..c3b98c34eb6
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c
@@ -0,0 +1,99 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc8313_rdb.c
+ *
+ * Description: MPC8313x RDB board specific routines.
+ * This file is based on mpc834x_sys.c
+ * Author: Lo Wlison <r43300@freescale.com>
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc8313_rdb_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc8313_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+}
+
+void __init mpc8313_rdb_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc8313_rdb_probe(void)
+{
+ char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "model", NULL);
+ if (model == NULL)
+ return 0;
+ if (strcmp(model, "MPC8313ERDB"))
+ return 0;
+
+ DBG("MPC8313 RDB found\n");
+
+ return 1;
+}
+
+define_machine(mpc8313_rdb) {
+ .name = "MPC8313 RDB",
+ .probe = mpc8313_rdb_probe,
+ .setup_arch = mpc8313_rdb_setup_arch,
+ .init_IRQ = mpc8313_rdb_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 2446dea9407..443a3172f37 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -38,8 +38,6 @@
#include "mpc83xx.h"
-#include <platforms/83xx/mpc834x_sys.h>
-
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index f30393f0b83..d2736da76c4 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_sys.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -1,7 +1,7 @@
/*
- * arch/powerpc/platforms/83xx/mpc834x_sys.c
+ * arch/powerpc/platforms/83xx/mpc834x_mds.c
*
- * MPC834x SYS board specific routines
+ * MPC834x MDS board specific routines
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
@@ -43,17 +43,87 @@ unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
+#define BCSR5_INT_USB 0x02
+/* Note: This is only for PB, not for PB+PIB
+ * On PB only port0 is connected using ULPI */
+static int mpc834x_usb_cfg(void)
+{
+ unsigned long sccr, sicrl;
+ void __iomem *immap;
+ void __iomem *bcsr_regs = NULL;
+ u8 bcsr5;
+ struct device_node *np = NULL;
+ int port0_is_dr = 0;
+
+ if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL)
+ port0_is_dr = 1;
+ if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){
+ if (port0_is_dr) {
+ printk(KERN_WARNING
+ "There is only one USB port on PB board! \n");
+ return -1;
+ } else if (!port0_is_dr)
+ /* No usb port enabled */
+ return -1;
+ }
+
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap)
+ return -1;
+
+ /* Configure clock */
+ sccr = in_be32(immap + MPC83XX_SCCR_OFFS);
+ if (port0_is_dr)
+ sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
+ else
+ sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
+ out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
+
+ /* Configure Pin */
+ sicrl = in_be32(immap + MPC83XX_SICRL_OFFS);
+ /* set port0 only */
+ if (port0_is_dr)
+ sicrl |= MPC83XX_SICRL_USB0;
+ else
+ sicrl &= ~(MPC83XX_SICRL_USB0);
+ out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
+
+ iounmap(immap);
+
+ /* Map BCSR area */
+ np = of_find_node_by_name(NULL, "bcsr");
+ if (np != 0) {
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ bcsr_regs = ioremap(res.start, res.end - res.start + 1);
+ of_node_put(np);
+ }
+ if (!bcsr_regs)
+ return -1;
+
+ /*
+ * if MDS board is plug into PIB board,
+ * force to use the PHY on MDS board
+ */
+ bcsr5 = in_8(bcsr_regs + 5);
+ if (!(bcsr5 & BCSR5_INT_USB))
+ out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
+ iounmap(bcsr_regs);
+ return 0;
+}
+
/* ************************************************************************
*
* Setup the architecture
*
*/
-static void __init mpc834x_sys_setup_arch(void)
+static void __init mpc834x_mds_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
- ppc_md.progress("mpc834x_sys_setup_arch()", 0);
+ ppc_md.progress("mpc834x_mds_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
@@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void)
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
+
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
@@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void)
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
+ mpc834x_usb_cfg();
+
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
@@ -79,7 +152,7 @@ static void __init mpc834x_sys_setup_arch(void)
#endif
}
-static void __init mpc834x_sys_init_IRQ(void)
+static void __init mpc834x_mds_init_IRQ(void)
{
struct device_node *np;
@@ -119,7 +192,7 @@ late_initcall(mpc834x_rtc_hookup);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init mpc834x_sys_probe(void)
+static int __init mpc834x_mds_probe(void)
{
/* We always match for now, eventually we should look at the flat
dev tree to ensure this is the board we are suppose to run on
@@ -127,11 +200,11 @@ static int __init mpc834x_sys_probe(void)
return 1;
}
-define_machine(mpc834x_sys) {
- .name = "MPC834x SYS",
- .probe = mpc834x_sys_probe,
- .setup_arch = mpc834x_sys_setup_arch,
- .init_IRQ = mpc834x_sys_init_IRQ,
+define_machine(mpc834x_mds) {
+ .name = "MPC834x MDS",
+ .probe = mpc834x_mds_probe,
+ .setup_arch = mpc834x_mds_setup_arch,
+ .init_IRQ = mpc834x_mds_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h
deleted file mode 100644
index 7d5bbef084e..00000000000
--- a/arch/powerpc/platforms/83xx/mpc834x_sys.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/powerpc/platforms/83xx/mpc834x_sys.h
- *
- * MPC834X SYS common board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC83XX_SYS_H__
-#define __MACH_MPC83XX_SYS_H__
-
-#define PIRQA MPC83xx_IRQ_EXT4
-#define PIRQB MPC83xx_IRQ_EXT5
-#define PIRQC MPC83xx_IRQ_EXT6
-#define PIRQD MPC83xx_IRQ_EXT7
-
-#endif /* __MACH_MPC83XX_SYS_H__ */
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 01cae106912..9cd03b59c8f 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -4,6 +4,24 @@
#include <linux/init.h>
#include <linux/device.h>
+/* System Clock Control Register */
+#define MPC83XX_SCCR_OFFS 0xA08
+#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000
+#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000
+#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000
+#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
+#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
+#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
+
+/* system i/o configuration register low */
+#define MPC83XX_SICRL_OFFS 0x114
+#define MPC83XX_SICRL_USB0 0x40000000
+#define MPC83XX_SICRL_USB1 0x20000000
+
+/* system i/o configuration register high */
+#define MPC83XX_SICRH_OFFS 0x118
+#define MPC83XX_SICRH_USB_UTMI 0x00020000
+
/*
* Declaration for the various functions exported by the
* mpc83xx_* files. Mostly for use by mpc83xx_setup
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 0584f3c7e88..0efdd2f1bab 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -23,6 +23,13 @@ config MPC85xx_CDS
help
This option enables support for the MPC85xx CDS board
+config MPC8568_MDS
+ bool "Freescale MPC8568 MDS"
+ select DEFAULT_UIMAGE
+# select QUICC_ENGINE
+ help
+ This option enables support for the MPC8568 MDS board
+
endchoice
config MPC8540
@@ -36,6 +43,12 @@ config MPC8560
select PPC_INDIRECT_PCI
default y if MPC8560_ADS
+config MPC85xx
+ bool
+ select PPC_UDBG_16550
+ select PPC_INDIRECT_PCI
+ default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS
+
config PPC_INDIRECT_PCI_BE
bool
depends on PPC_85xx
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 282f5d0d015..e40e521816b 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
+obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o
diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc8568_mds.c
new file mode 100644
index 00000000000..0861d1107bc
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc8568_mds.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
+ *
+ * Author: Andy Fleming <afleming@freescale.com>
+ *
+ * Based on 83xx/mpc8360e_pb.c by:
+ * Li Yang <LeoLi@freescale.com>
+ * Yin Olivia <Hong-hua.Yin@freescale.com>
+ *
+ * Description:
+ * MPC8568E MDS PB board specific routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <asm/mpic.h>
+
+#include "mpc85xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc8568_mds_setup_arch(void)
+{
+ struct device_node *np;
+ static u8 *bcsr_regs = NULL;
+
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc8568_mds_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != NULL) {
+ const unsigned int *fp =
+ get_property(np, "clock-frequency", NULL);
+ if (fp != NULL)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+
+ /* Map BCSR area */
+ np = of_find_node_by_name(NULL, "bcsr");
+ if (np != NULL) {
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ bcsr_regs = ioremap(res.start, res.end - res.start +1);
+ of_node_put(np);
+ }
+
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
+ add_bridge(np);
+ }
+ of_node_put(np);
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+ if ((np = of_find_node_by_name(NULL, "qe")) != NULL) {
+ qe_reset();
+ of_node_put(np);
+ }
+
+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
+ struct device_node *ucc = NULL;
+
+ par_io_init(np);
+ of_node_put(np);
+
+ for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;)
+ par_io_of_config(ucc);
+
+ of_node_put(ucc);
+ }
+
+ if (bcsr_regs) {
+ u8 bcsr_phy;
+
+ /* Reset the Ethernet PHY */
+ bcsr_phy = in_be8(&bcsr_regs[9]);
+ bcsr_phy &= ~0x20;
+ out_be8(&bcsr_regs[9], bcsr_phy);
+
+ udelay(1000);
+
+ bcsr_phy = in_be8(&bcsr_regs[9]);
+ bcsr_phy |= 0x20;
+ out_be8(&bcsr_regs[9], bcsr_phy);
+
+ iounmap(bcsr_regs);
+ }
+
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+static struct of_device_id mpc8568_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .type = "qe", },
+ {},
+};
+
+static int __init mpc8568_publish_devices(void)
+{
+ if (!machine_is(mpc8568_mds))
+ return 0;
+
+ /* Publish the QE devices */
+ of_platform_bus_probe(NULL,mpc8568_ids,NULL);
+
+ return 0;
+}
+device_initcall(mpc8568_publish_devices);
+
+static void __init mpc8568_mds_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (!np)
+ return;
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Failed to map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 4, 0, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ /* Internal Interrupts */
+ mpic_assign_isu(mpic, 0, r.start + 0x10200);
+ mpic_assign_isu(mpic, 1, r.start + 0x10280);
+ mpic_assign_isu(mpic, 2, r.start + 0x10300);
+ mpic_assign_isu(mpic, 3, r.start + 0x10380);
+ mpic_assign_isu(mpic, 4, r.start + 0x10400);
+ mpic_assign_isu(mpic, 5, r.start + 0x10480);
+ mpic_assign_isu(mpic, 6, r.start + 0x10500);
+ mpic_assign_isu(mpic, 7, r.start + 0x10580);
+ mpic_assign_isu(mpic, 8, r.start + 0x10600);
+ mpic_assign_isu(mpic, 9, r.start + 0x10680);
+ mpic_assign_isu(mpic, 10, r.start + 0x10700);
+ mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+ /* External Interrupts */
+ mpic_assign_isu(mpic, 12, r.start + 0x10000);
+ mpic_assign_isu(mpic, 13, r.start + 0x10080);
+ mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+ mpic_init(mpic);
+
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+
+ qe_ic_init(np, 0);
+ of_node_put(np);
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+
+static int __init mpc8568_mds_probe(void)
+{
+ char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "model", NULL);
+ if (model == NULL)
+ return 0;
+ if (strcmp(model, "MPC8568EMDS"))
+ return 0;
+
+ DBG("MPC8568EMDS found\n");
+
+ return 1;
+}
+
+
+define_machine(mpc8568_mds) {
+ .name = "MPC8568E MDS",
+ .probe = mpc8568_mds_probe,
+ .setup_arch = mpc8568_mds_setup_arch,
+ .init_IRQ = mpc8568_mds_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = mpc85xx_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index bda2e55e6c4..c56fce57621 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -45,8 +45,7 @@ unsigned long isa_mem_base = 0;
#endif
#ifdef CONFIG_PCI
-int
-mpc85xx_exclude_device(u_char bus, u_char devfn)
+static int mpc85xx_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -69,7 +68,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
#endif /* CONFIG_CPM2 */
-void __init mpc85xx_ads_pic_init(void)
+static void __init mpc85xx_ads_pic_init(void)
{
struct mpic *mpic;
struct resource r;
@@ -254,7 +253,7 @@ static void __init mpc85xx_ads_setup_arch(void)
#endif
}
-void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
+static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
uint memsize = total_memory;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 953cd5dd3f5..abc0aca6de4 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -56,7 +56,6 @@ unsigned long isa_mem_base = 0;
static int cds_pci_slot = 2;
static volatile u8 *cadmus;
-
#ifdef CONFIG_PCI
#define ARCADIA_HOST_BRIDGE_IDSEL 17
@@ -64,8 +63,7 @@ static volatile u8 *cadmus;
extern int mpc85xx_pci2_busno;
-int
-mpc85xx_exclude_device(u_char bus, u_char devfn)
+static int mpc85xx_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -81,8 +79,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
return PCIBIOS_SUCCESSFUL;
}
-void __init
-mpc85xx_cds_pcibios_fixup(void)
+static void __init mpc85xx_cds_pcibios_fixup(void)
{
struct pci_dev *dev;
u_char c;
@@ -144,7 +141,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
#endif /* PPC_I8259 */
#endif /* CONFIG_PCI */
-void __init mpc85xx_cds_pic_init(void)
+static void __init mpc85xx_cds_pic_init(void)
{
struct mpic *mpic;
struct resource r;
@@ -224,12 +221,10 @@ void __init mpc85xx_cds_pic_init(void)
#endif /* CONFIG_PPC_I8259 */
}
-
/*
* Setup the architecture
*/
-static void __init
-mpc85xx_cds_setup_arch(void)
+static void __init mpc85xx_cds_setup_arch(void)
{
struct device_node *cpu;
#ifdef CONFIG_PCI
@@ -276,9 +271,7 @@ mpc85xx_cds_setup_arch(void)
#endif
}
-
-void
-mpc85xx_cds_show_cpuinfo(struct seq_file *m)
+static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
uint memsize = total_memory;
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 65e612315b9..452004283f1 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -5,9 +5,9 @@ ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_PPC_PMAC) += powermac/
endif
endif
-obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_4xx) += 4xx/
+obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_8xx) += 8xx/
obj-$(CONFIG_PPC_82xx) += 82xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c
index d04ae1671e6..66ca4b5a1db 100644
--- a/arch/powerpc/platforms/cell/pmu.c
+++ b/arch/powerpc/platforms/cell/pmu.c
@@ -345,18 +345,12 @@ EXPORT_SYMBOL_GPL(cbe_read_trace_buffer);
* Enabling/disabling interrupts for the entire performance monitoring unit.
*/
-u32 cbe_query_pm_interrupts(u32 cpu)
-{
- return cbe_read_pm(cpu, pm_status);
-}
-EXPORT_SYMBOL_GPL(cbe_query_pm_interrupts);
-
-u32 cbe_clear_pm_interrupts(u32 cpu)
+u32 cbe_get_and_clear_pm_interrupts(u32 cpu)
{
/* Reading pm_status clears the interrupt bits. */
- return cbe_query_pm_interrupts(cpu);
+ return cbe_read_pm(cpu, pm_status);
}
-EXPORT_SYMBOL_GPL(cbe_clear_pm_interrupts);
+EXPORT_SYMBOL_GPL(cbe_get_and_clear_pm_interrupts);
void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask)
{
@@ -371,7 +365,7 @@ EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts);
void cbe_disable_pm_interrupts(u32 cpu)
{
- cbe_clear_pm_interrupts(cpu);
+ cbe_get_and_clear_pm_interrupts(cpu);
cbe_write_pm(cpu, pm_status, 0);
}
EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts);
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index d8b39fe39cd..e34599f53d2 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -59,63 +59,6 @@ static u64 __init find_spu_unit_number(struct device_node *spe)
return 0;
}
-static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
- const char *prop)
-{
- const struct address_prop {
- unsigned long address;
- unsigned int len;
- } __attribute__((packed)) *p;
- int proplen;
-
- unsigned long start_pfn, nr_pages;
- struct pglist_data *pgdata;
- struct zone *zone;
- int ret;
-
- p = get_property(spe, prop, &proplen);
- WARN_ON(proplen != sizeof (*p));
-
- start_pfn = p->address >> PAGE_SHIFT;
- nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
-
- pgdata = NODE_DATA(spu->node);
- zone = pgdata->node_zones;
-
- ret = __add_pages(zone, start_pfn, nr_pages);
-
- return ret;
-}
-
-static void __iomem * __init map_spe_prop(struct spu *spu,
- struct device_node *n, const char *name)
-{
- const struct address_prop {
- unsigned long address;
- unsigned int len;
- } __attribute__((packed)) *prop;
-
- const void *p;
- int proplen;
- void __iomem *ret = NULL;
- int err = 0;
-
- p = get_property(n, name, &proplen);
- if (proplen != sizeof (struct address_prop))
- return NULL;
-
- prop = p;
-
- err = cell_spuprop_present(spu, n, name);
- if (err && (err != -EEXIST))
- goto out;
-
- ret = ioremap(prop->address, prop->len);
-
- out:
- return ret;
-}
-
static void spu_unmap(struct spu *spu)
{
if (!firmware_has_feature(FW_FEATURE_LPAR))
@@ -157,6 +100,23 @@ static int __init spu_map_interrupts_old(struct spu *spu,
return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
}
+static void __iomem * __init spu_map_prop_old(struct spu *spu,
+ struct device_node *n,
+ const char *name)
+{
+ const struct address_prop {
+ unsigned long address;
+ unsigned int len;
+ } __attribute__((packed)) *prop;
+ int proplen;
+
+ prop = get_property(n, name, &proplen);
+ if (prop == NULL || proplen != sizeof (struct address_prop))
+ return NULL;
+
+ return ioremap(prop->address, prop->len);
+}
+
static int __init spu_map_device_old(struct spu *spu)
{
struct device_node *node = spu->devnode;
@@ -175,7 +135,7 @@ static int __init spu_map_device_old(struct spu *spu)
/* we use local store as ram, not io memory */
spu->local_store = (void __force *)
- map_spe_prop(spu, node, "local-store");
+ spu_map_prop_old(spu, node, "local-store");
if (!spu->local_store)
goto out;
@@ -184,16 +144,16 @@ static int __init spu_map_device_old(struct spu *spu)
goto out_unmap;
spu->problem_phys = *(unsigned long *)prop;
- spu->problem = map_spe_prop(spu, node, "problem");
+ spu->problem = spu_map_prop_old(spu, node, "problem");
if (!spu->problem)
goto out_unmap;
- spu->priv2 = map_spe_prop(spu, node, "priv2");
+ spu->priv2 = spu_map_prop_old(spu, node, "priv2");
if (!spu->priv2)
goto out_unmap;
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
- spu->priv1 = map_spe_prop(spu, node, "priv1");
+ spu->priv1 = spu_map_prop_old(spu, node, "priv1");
if (!spu->priv1)
goto out_unmap;
}
@@ -245,34 +205,20 @@ static int spu_map_resource(struct spu *spu, int nr,
void __iomem** virt, unsigned long *phys)
{
struct device_node *np = spu->devnode;
- unsigned long start_pfn, nr_pages;
- struct pglist_data *pgdata;
- struct zone *zone;
struct resource resource = { };
unsigned long len;
int ret;
ret = of_address_to_resource(np, nr, &resource);
if (ret)
- goto out;
-
+ return ret;
if (phys)
*phys = resource.start;
len = resource.end - resource.start + 1;
*virt = ioremap(resource.start, len);
if (!*virt)
- ret = -EINVAL;
-
- start_pfn = resource.start >> PAGE_SHIFT;
- nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
-
- pgdata = NODE_DATA(spu->node);
- zone = pgdata->node_zones;
-
- ret = __add_pages(zone, start_pfn, nr_pages);
-
-out:
- return ret;
+ return -EINVAL;
+ return 0;
}
static int __init spu_map_device(struct spu *spu)
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 0870009f56d..04ad2e364e9 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -42,7 +42,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang)
}
spin_lock_init(&ctx->mmio_lock);
kref_init(&ctx->kref);
- init_rwsem(&ctx->state_sema);
+ mutex_init(&ctx->state_mutex);
init_MUTEX(&ctx->run_sema);
init_waitqueue_head(&ctx->ibox_wq);
init_waitqueue_head(&ctx->wbox_wq);
@@ -53,6 +53,10 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang)
ctx->owner = get_task_mm(current);
if (gang)
spu_gang_add_ctx(gang, ctx);
+ ctx->rt_priority = current->rt_priority;
+ ctx->policy = current->policy;
+ ctx->prio = current->prio;
+ INIT_DELAYED_WORK(&ctx->sched_work, spu_sched_tick);
goto out;
out_free:
kfree(ctx);
@@ -65,9 +69,9 @@ void destroy_spu_context(struct kref *kref)
{
struct spu_context *ctx;
ctx = container_of(kref, struct spu_context, kref);
- down_write(&ctx->state_sema);
+ mutex_lock(&ctx->state_mutex);
spu_deactivate(ctx);
- up_write(&ctx->state_sema);
+ mutex_unlock(&ctx->state_mutex);
spu_fini_csa(&ctx->csa);
if (ctx->gang)
spu_gang_remove_ctx(ctx->gang, ctx);
@@ -96,107 +100,102 @@ void spu_forget(struct spu_context *ctx)
spu_release(ctx);
}
-void spu_acquire(struct spu_context *ctx)
-{
- down_read(&ctx->state_sema);
-}
-
-void spu_release(struct spu_context *ctx)
-{
- up_read(&ctx->state_sema);
-}
-
void spu_unmap_mappings(struct spu_context *ctx)
{
if (ctx->local_store)
unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
if (ctx->mfc)
- unmap_mapping_range(ctx->mfc, 0, 0x4000, 1);
+ unmap_mapping_range(ctx->mfc, 0, 0x1000, 1);
if (ctx->cntl)
- unmap_mapping_range(ctx->cntl, 0, 0x4000, 1);
+ unmap_mapping_range(ctx->cntl, 0, 0x1000, 1);
if (ctx->signal1)
- unmap_mapping_range(ctx->signal1, 0, 0x4000, 1);
+ unmap_mapping_range(ctx->signal1, 0, PAGE_SIZE, 1);
if (ctx->signal2)
- unmap_mapping_range(ctx->signal2, 0, 0x4000, 1);
+ unmap_mapping_range(ctx->signal2, 0, PAGE_SIZE, 1);
+ if (ctx->mss)
+ unmap_mapping_range(ctx->mss, 0, 0x1000, 1);
+ if (ctx->psmap)
+ unmap_mapping_range(ctx->psmap, 0, 0x20000, 1);
}
+/**
+ * spu_acquire_exclusive - lock spu contex and protect against userspace access
+ * @ctx: spu contex to lock
+ *
+ * Note:
+ * Returns 0 and with the context locked on success
+ * Returns negative error and with the context _unlocked_ on failure.
+ */
int spu_acquire_exclusive(struct spu_context *ctx)
{
- int ret = 0;
+ int ret = -EINVAL;
- down_write(&ctx->state_sema);
- /* ctx is about to be freed, can't acquire any more */
- if (!ctx->owner) {
- ret = -EINVAL;
- goto out;
- }
+ spu_acquire(ctx);
+ /*
+ * Context is about to be freed, so we can't acquire it anymore.
+ */
+ if (!ctx->owner)
+ goto out_unlock;
if (ctx->state == SPU_STATE_SAVED) {
ret = spu_activate(ctx, 0);
if (ret)
- goto out;
- ctx->state = SPU_STATE_RUNNABLE;
+ goto out_unlock;
} else {
- /* We need to exclude userspace access to the context. */
+ /*
+ * We need to exclude userspace access to the context.
+ *
+ * To protect against memory access we invalidate all ptes
+ * and make sure the pagefault handlers block on the mutex.
+ */
spu_unmap_mappings(ctx);
}
-out:
- if (ret)
- up_write(&ctx->state_sema);
+ return 0;
+
+ out_unlock:
+ spu_release(ctx);
return ret;
}
-int spu_acquire_runnable(struct spu_context *ctx)
+/**
+ * spu_acquire_runnable - lock spu contex and make sure it is in runnable state
+ * @ctx: spu contex to lock
+ *
+ * Note:
+ * Returns 0 and with the context locked on success
+ * Returns negative error and with the context _unlocked_ on failure.
+ */
+int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags)
{
- int ret = 0;
-
- down_read(&ctx->state_sema);
- if (ctx->state == SPU_STATE_RUNNABLE) {
- ctx->spu->prio = current->prio;
- return 0;
- }
- up_read(&ctx->state_sema);
-
- down_write(&ctx->state_sema);
- /* ctx is about to be freed, can't acquire any more */
- if (!ctx->owner) {
- ret = -EINVAL;
- goto out;
- }
+ int ret = -EINVAL;
+ spu_acquire(ctx);
if (ctx->state == SPU_STATE_SAVED) {
- ret = spu_activate(ctx, 0);
+ /*
+ * Context is about to be freed, so we can't acquire it anymore.
+ */
+ if (!ctx->owner)
+ goto out_unlock;
+ ret = spu_activate(ctx, flags);
if (ret)
- goto out;
- ctx->state = SPU_STATE_RUNNABLE;
+ goto out_unlock;
}
- downgrade_write(&ctx->state_sema);
- /* On success, we return holding the lock */
-
- return ret;
-out:
- /* Release here, to simplify calling code. */
- up_write(&ctx->state_sema);
+ return 0;
+ out_unlock:
+ spu_release(ctx);
return ret;
}
+/**
+ * spu_acquire_saved - lock spu contex and make sure it is in saved state
+ * @ctx: spu contex to lock
+ */
void spu_acquire_saved(struct spu_context *ctx)
{
- down_read(&ctx->state_sema);
-
- if (ctx->state == SPU_STATE_SAVED)
- return;
-
- up_read(&ctx->state_sema);
- down_write(&ctx->state_sema);
-
- if (ctx->state == SPU_STATE_RUNNABLE) {
+ spu_acquire(ctx);
+ if (ctx->state != SPU_STATE_SAVED)
spu_deactivate(ctx);
- ctx->state = SPU_STATE_SAVED;
- }
-
- downgrade_write(&ctx->state_sema);
}
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index af9e9455a70..b00653d69c0 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -45,8 +45,8 @@ spufs_mem_open(struct inode *inode, struct file *file)
struct spufs_inode_info *i = SPUFS_I(inode);
struct spu_context *ctx = i->i_ctx;
file->private_data = ctx;
- file->f_mapping = inode->i_mapping;
ctx->local_store = inode->i_mapping;
+ smp_wmb();
return 0;
}
@@ -95,39 +95,38 @@ spufs_mem_write(struct file *file, const char __user *buffer,
return ret;
}
-static struct page *
-spufs_mem_mmap_nopage(struct vm_area_struct *vma,
- unsigned long address, int *type)
+static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
+ unsigned long address)
{
- struct page *page = NOPAGE_SIGBUS;
-
struct spu_context *ctx = vma->vm_file->private_data;
- unsigned long offset = address - vma->vm_start;
+ unsigned long pfn, offset = address - vma->vm_start;
+
offset += vma->vm_pgoff << PAGE_SHIFT;
+ if (offset >= LS_SIZE)
+ return NOPFN_SIGBUS;
+
spu_acquire(ctx);
if (ctx->state == SPU_STATE_SAVED) {
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
& ~_PAGE_NO_CACHE);
- page = vmalloc_to_page(ctx->csa.lscsa->ls + offset);
+ pfn = vmalloc_to_pfn(ctx->csa.lscsa->ls + offset);
} else {
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
- | _PAGE_NO_CACHE);
- page = pfn_to_page((ctx->spu->local_store_phys + offset)
- >> PAGE_SHIFT);
+ | _PAGE_NO_CACHE);
+ pfn = (ctx->spu->local_store_phys + offset) >> PAGE_SHIFT;
}
- spu_release(ctx);
+ vm_insert_pfn(vma, address, pfn);
- if (type)
- *type = VM_FAULT_MINOR;
+ spu_release(ctx);
- page_cache_get(page);
- return page;
+ return NOPFN_REFAULT;
}
+
static struct vm_operations_struct spufs_mem_mmap_vmops = {
- .nopage = spufs_mem_mmap_nopage,
+ .nopfn = spufs_mem_mmap_nopfn,
};
static int
@@ -136,7 +135,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
- vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
| _PAGE_NO_CACHE);
@@ -152,49 +151,42 @@ static const struct file_operations spufs_mem_fops = {
.mmap = spufs_mem_mmap,
};
-static struct page *spufs_ps_nopage(struct vm_area_struct *vma,
+static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
unsigned long address,
- int *type, unsigned long ps_offs,
+ unsigned long ps_offs,
unsigned long ps_size)
{
- struct page *page = NOPAGE_SIGBUS;
- int fault_type = VM_FAULT_SIGBUS;
struct spu_context *ctx = vma->vm_file->private_data;
- unsigned long offset = address - vma->vm_start;
- unsigned long area;
+ unsigned long area, offset = address - vma->vm_start;
int ret;
offset += vma->vm_pgoff << PAGE_SHIFT;
if (offset >= ps_size)
- goto out;
+ return NOPFN_SIGBUS;
- ret = spu_acquire_runnable(ctx);
+ /* error here usually means a signal.. we might want to test
+ * the error code more precisely though
+ */
+ ret = spu_acquire_runnable(ctx, 0);
if (ret)
- goto out;
+ return NOPFN_REFAULT;
area = ctx->spu->problem_phys + ps_offs;
- page = pfn_to_page((area + offset) >> PAGE_SHIFT);
- fault_type = VM_FAULT_MINOR;
- page_cache_get(page);
-
+ vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT);
spu_release(ctx);
- out:
- if (type)
- *type = fault_type;
-
- return page;
+ return NOPFN_REFAULT;
}
#if SPUFS_MMAP_4K
-static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma,
- unsigned long address, int *type)
+static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma,
+ unsigned long address)
{
- return spufs_ps_nopage(vma, address, type, 0x4000, 0x1000);
+ return spufs_ps_nopfn(vma, address, 0x4000, 0x1000);
}
static struct vm_operations_struct spufs_cntl_mmap_vmops = {
- .nopage = spufs_cntl_mmap_nopage,
+ .nopfn = spufs_cntl_mmap_nopfn,
};
/*
@@ -205,7 +197,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma)
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
- vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
| _PAGE_NO_CACHE | _PAGE_GUARDED);
@@ -243,8 +235,8 @@ static int spufs_cntl_open(struct inode *inode, struct file *file)
struct spu_context *ctx = i->i_ctx;
file->private_data = ctx;
- file->f_mapping = inode->i_mapping;
ctx->cntl = inode->i_mapping;
+ smp_wmb();
return simple_attr_open(inode, file, spufs_cntl_get,
spufs_cntl_set, "0x%08lx");
}
@@ -728,8 +720,8 @@ static int spufs_signal1_open(struct inode *inode, struct file *file)
struct spufs_inode_info *i = SPUFS_I(inode);
struct spu_context *ctx = i->i_ctx;
file->private_data = ctx;
- file->f_mapping = inode->i_mapping;
ctx->signal1 = inode->i_mapping;
+ smp_wmb();
return nonseekable_open(inode, file);
}
@@ -791,23 +783,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf,
return 4;
}
-static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma,
- unsigned long address, int *type)
+static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma,
+ unsigned long address)
{
#if PAGE_SIZE == 0x1000
- return spufs_ps_nopage(vma, address, type, 0x14000, 0x1000);
+ return spufs_ps_nopfn(vma, address, 0x14000, 0x1000);
#elif PAGE_SIZE == 0x10000
/* For 64k pages, both signal1 and signal2 can be used to mmap the whole
* signal 1 and 2 area
*/
- return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000);
+ return spufs_ps_nopfn(vma, address, 0x10000, 0x10000);
#else
#error unsupported page size
#endif
}
static struct vm_operations_struct spufs_signal1_mmap_vmops = {
- .nopage = spufs_signal1_mmap_nopage,
+ .nopfn = spufs_signal1_mmap_nopfn,
};
static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
@@ -815,7 +807,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
- vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
| _PAGE_NO_CACHE | _PAGE_GUARDED);
@@ -835,8 +827,8 @@ static int spufs_signal2_open(struct inode *inode, struct file *file)
struct spufs_inode_info *i = SPUFS_I(inode);
struct spu_context *ctx = i->i_ctx;
file->private_data = ctx;
- file->f_mapping = inode->i_mapping;
ctx->signal2 = inode->i_mapping;
+ smp_wmb();
return nonseekable_open(inode, file);
}
@@ -899,23 +891,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf,
}
#if SPUFS_MMAP_4K
-static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma,
- unsigned long address, int *type)
+static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma,
+ unsigned long address)
{
#if PAGE_SIZE == 0x1000
- return spufs_ps_nopage(vma, address, type, 0x1c000, 0x1000);
+ return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000);
#elif PAGE_SIZE == 0x10000
/* For 64k pages, both signal1 and signal2 can be used to mmap the whole
* signal 1 and 2 area
*/
- return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000);
+ return spufs_ps_nopfn(vma, address, 0x10000, 0x10000);
#else
#error unsupported page size
#endif
}
static struct vm_operations_struct spufs_signal2_mmap_vmops = {
- .nopage = spufs_signal2_mmap_nopage,
+ .nopfn = spufs_signal2_mmap_nopfn,
};
static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
@@ -923,7 +915,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
- vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
| _PAGE_NO_CACHE | _PAGE_GUARDED);
@@ -1000,14 +992,14 @@ DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
spufs_signal2_type_set, "%llu");
#if SPUFS_MMAP_4K
-static struct page *spufs_mss_mmap_nopage(struct vm_area_struct *vma,
- unsigned long address, int *type)
+static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma,
+ unsigned long address)
{
- return spufs_ps_nopage(vma, address, type, 0x0000, 0x1000);
+ return spufs_ps_nopfn(vma, address, 0x0000, 0x1000);
}
static struct vm_operations_struct spufs_mss_mmap_vmops = {
- .nopage = spufs_mss_mmap_nopage,
+ .nopfn = spufs_mss_mmap_nopfn,
};
/*
@@ -1018,7 +1010,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma)
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
- vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
| _PAGE_NO_CACHE | _PAGE_GUARDED);
@@ -1032,8 +1024,11 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma)
static int spufs_mss_open(struct inode *inode, struct file *file)
{
struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
file->private_data = i->i_ctx;
+ ctx->mss = inode->i_mapping;
+ smp_wmb();
return nonseekable_open(inode, file);
}
@@ -1042,14 +1037,14 @@ static const struct file_operations spufs_mss_fops = {
.mmap = spufs_mss_mmap,
};
-static struct page *spufs_psmap_mmap_nopage(struct vm_area_struct *vma,
- unsigned long address, int *type)
+static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma,
+ unsigned long address)
{
- return spufs_ps_nopage(vma, address, type, 0x0000, 0x20000);
+ return spufs_ps_nopfn(vma, address, 0x0000, 0x20000);
}
static struct vm_operations_struct spufs_psmap_mmap_vmops = {
- .nopage = spufs_psmap_mmap_nopage,
+ .nopfn = spufs_psmap_mmap_nopfn,
};
/*
@@ -1060,7 +1055,7 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma)
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
- vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
| _PAGE_NO_CACHE | _PAGE_GUARDED);
@@ -1071,8 +1066,11 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma)
static int spufs_psmap_open(struct inode *inode, struct file *file)
{
struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
file->private_data = i->i_ctx;
+ ctx->psmap = inode->i_mapping;
+ smp_wmb();
return nonseekable_open(inode, file);
}
@@ -1083,14 +1081,14 @@ static const struct file_operations spufs_psmap_fops = {
#if SPUFS_MMAP_4K
-static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma,
- unsigned long address, int *type)
+static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma,
+ unsigned long address)
{
- return spufs_ps_nopage(vma, address, type, 0x3000, 0x1000);
+ return spufs_ps_nopfn(vma, address, 0x3000, 0x1000);
}
static struct vm_operations_struct spufs_mfc_mmap_vmops = {
- .nopage = spufs_mfc_mmap_nopage,
+ .nopfn = spufs_mfc_mmap_nopfn,
};
/*
@@ -1101,7 +1099,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma)
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
- vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
| _PAGE_NO_CACHE | _PAGE_GUARDED);
@@ -1125,6 +1123,8 @@ static int spufs_mfc_open(struct inode *inode, struct file *file)
return -EBUSY;
file->private_data = ctx;
+ ctx->mfc = inode->i_mapping;
+ smp_wmb();
return nonseekable_open(inode, file);
}
@@ -1309,7 +1309,7 @@ static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer,
if (ret)
goto out;
- spu_acquire_runnable(ctx);
+ spu_acquire_runnable(ctx, 0);
if (file->f_flags & O_NONBLOCK) {
ret = ctx->ops->send_mfc_command(ctx, &cmd);
} else {
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index 1acc2ffef8c..353a8fa07ab 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -133,7 +133,7 @@ out_drop_priv:
spu_mfc_sr1_set(ctx->spu, sr1);
out_unlock:
- spu_release_exclusive(ctx);
+ spu_release(ctx);
out:
return ret;
}
@@ -143,7 +143,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc)
int ret;
unsigned long runcntl = SPU_RUNCNTL_RUNNABLE;
- ret = spu_acquire_runnable(ctx);
+ ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE);
if (ret)
return ret;
@@ -155,7 +155,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc)
spu_release(ctx);
ret = spu_setup_isolated(ctx);
if (!ret)
- ret = spu_acquire_runnable(ctx);
+ ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE);
}
/* if userspace has set the runcntrl register (eg, to issue an
@@ -164,8 +164,10 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc)
(SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
if (runcntl == 0)
runcntl = SPU_RUNCNTL_RUNNABLE;
- } else
+ } else {
+ spu_start_tick(ctx);
ctx->ops->npc_write(ctx, *npc);
+ }
ctx->ops->runcntl_write(ctx, runcntl);
return ret;
@@ -176,6 +178,7 @@ static inline int spu_run_fini(struct spu_context *ctx, u32 * npc,
{
int ret = 0;
+ spu_stop_tick(ctx);
*status = ctx->ops->status_read(ctx);
*npc = ctx->ops->npc_read(ctx);
spu_release(ctx);
@@ -329,8 +332,10 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx,
}
if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) {
ret = spu_reacquire_runnable(ctx, npc, &status);
- if (ret)
+ if (ret) {
+ spu_stop_tick(ctx);
goto out2;
+ }
continue;
}
ret = spu_process_events(ctx);
@@ -361,4 +366,3 @@ out:
up(&ctx->run_sema);
return ret;
}
-
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index bd6fe4b7a84..2f25e68b4ba 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -44,17 +44,18 @@
#include <asm/spu_priv1.h>
#include "spufs.h"
-#define SPU_MIN_TIMESLICE (100 * HZ / 1000)
+#define SPU_TIMESLICE (HZ)
-#define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1)
struct spu_prio_array {
- unsigned long bitmap[SPU_BITMAP_SIZE];
- wait_queue_head_t waitq[MAX_PRIO];
+ DECLARE_BITMAP(bitmap, MAX_PRIO);
+ struct list_head runq[MAX_PRIO];
+ spinlock_t runq_lock;
struct list_head active_list[MAX_NUMNODES];
struct mutex active_mutex[MAX_NUMNODES];
};
static struct spu_prio_array *spu_prio;
+static struct workqueue_struct *spu_sched_wq;
static inline int node_allowed(int node)
{
@@ -68,6 +69,64 @@ static inline int node_allowed(int node)
return 1;
}
+void spu_start_tick(struct spu_context *ctx)
+{
+ if (ctx->policy == SCHED_RR)
+ queue_delayed_work(spu_sched_wq, &ctx->sched_work, SPU_TIMESLICE);
+}
+
+void spu_stop_tick(struct spu_context *ctx)
+{
+ if (ctx->policy == SCHED_RR)
+ cancel_delayed_work(&ctx->sched_work);
+}
+
+void spu_sched_tick(struct work_struct *work)
+{
+ struct spu_context *ctx =
+ container_of(work, struct spu_context, sched_work.work);
+ struct spu *spu;
+ int rearm = 1;
+
+ mutex_lock(&ctx->state_mutex);
+ spu = ctx->spu;
+ if (spu) {
+ int best = sched_find_first_bit(spu_prio->bitmap);
+ if (best <= ctx->prio) {
+ spu_deactivate(ctx);
+ rearm = 0;
+ }
+ }
+ mutex_unlock(&ctx->state_mutex);
+
+ if (rearm)
+ spu_start_tick(ctx);
+}
+
+/**
+ * spu_add_to_active_list - add spu to active list
+ * @spu: spu to add to the active list
+ */
+static void spu_add_to_active_list(struct spu *spu)
+{
+ mutex_lock(&spu_prio->active_mutex[spu->node]);
+ list_add_tail(&spu->list, &spu_prio->active_list[spu->node]);
+ mutex_unlock(&spu_prio->active_mutex[spu->node]);
+}
+
+/**
+ * spu_remove_from_active_list - remove spu from active list
+ * @spu: spu to remove from the active list
+ */
+static void spu_remove_from_active_list(struct spu *spu)
+{
+ int node = spu->node;
+
+ mutex_lock(&spu_prio->active_mutex[node]);
+ list_del_init(&spu->list);
+ mutex_unlock(&spu_prio->active_mutex[node]);
+}
+
static inline void mm_needs_global_tlbie(struct mm_struct *mm)
{
int nr = (NR_CPUS > 1) ? NR_CPUS : NR_CPUS + 1;
@@ -94,8 +153,12 @@ int spu_switch_event_unregister(struct notifier_block * n)
return blocking_notifier_chain_unregister(&spu_switch_notifier, n);
}
-
-static inline void bind_context(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_bind_context - bind spu context to physical spu
+ * @spu: physical spu to bind to
+ * @ctx: context to bind
+ */
+static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
{
pr_debug("%s: pid=%d SPU=%d NODE=%d\n", __FUNCTION__, current->pid,
spu->number, spu->node);
@@ -104,7 +167,6 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx)
ctx->spu = spu;
ctx->ops = &spu_hw_ops;
spu->pid = current->pid;
- spu->prio = current->prio;
spu->mm = ctx->owner;
mm_needs_global_tlbie(spu->mm);
spu->ibox_callback = spufs_ibox_callback;
@@ -118,12 +180,21 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx)
spu->timestamp = jiffies;
spu_cpu_affinity_set(spu, raw_smp_processor_id());
spu_switch_notify(spu, ctx);
+ spu_add_to_active_list(spu);
+ ctx->state = SPU_STATE_RUNNABLE;
}
-static inline void unbind_context(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unbind_context - unbind spu context from physical spu
+ * @spu: physical spu to unbind from
+ * @ctx: context to unbind
+ */
+static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
{
pr_debug("%s: unbind pid=%d SPU=%d NODE=%d\n", __FUNCTION__,
spu->pid, spu->number, spu->node);
+
+ spu_remove_from_active_list(spu);
spu_switch_notify(spu, NULL);
spu_unmap_mappings(ctx);
spu_save(&ctx->csa, spu);
@@ -136,95 +207,98 @@ static inline void unbind_context(struct spu *spu, struct spu_context *ctx)
spu->dma_callback = NULL;
spu->mm = NULL;
spu->pid = 0;
- spu->prio = MAX_PRIO;
ctx->ops = &spu_backing_ops;
ctx->spu = NULL;
spu->flags = 0;
spu->ctx = NULL;
}
-static inline void spu_add_wq(wait_queue_head_t * wq, wait_queue_t * wait,
- int prio)
+/**
+ * spu_add_to_rq - add a context to the runqueue
+ * @ctx: context to add
+ */
+static void spu_add_to_rq(struct spu_context *ctx)
{
- prepare_to_wait_exclusive(wq, wait, TASK_INTERRUPTIBLE);
- set_bit(prio, spu_prio->bitmap);
+ spin_lock(&spu_prio->runq_lock);
+ list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]);
+ set_bit(ctx->prio, spu_prio->bitmap);
+ spin_unlock(&spu_prio->runq_lock);
}
-static inline void spu_del_wq(wait_queue_head_t * wq, wait_queue_t * wait,
- int prio)
+/**
+ * spu_del_from_rq - remove a context from the runqueue
+ * @ctx: context to remove
+ */
+static void spu_del_from_rq(struct spu_context *ctx)
{
- u64 flags;
-
- __set_current_state(TASK_RUNNING);
-
- spin_lock_irqsave(&wq->lock, flags);
+ spin_lock(&spu_prio->runq_lock);
+ list_del_init(&ctx->rq);
+ if (list_empty(&spu_prio->runq[ctx->prio]))
+ clear_bit(ctx->prio, spu_prio->bitmap);
+ spin_unlock(&spu_prio->runq_lock);
+}
- remove_wait_queue_locked(wq, wait);
- if (list_empty(&wq->task_list))
- clear_bit(prio, spu_prio->bitmap);
+/**
+ * spu_grab_context - remove one context from the runqueue
+ * @prio: priority of the context to be removed
+ *
+ * This function removes one context from the runqueue for priority @prio.
+ * If there is more than one context with the given priority the first
+ * task on the runqueue will be taken.
+ *
+ * Returns the spu_context it just removed.
+ *
+ * Must be called with spu_prio->runq_lock held.
+ */
+static struct spu_context *spu_grab_context(int prio)
+{
+ struct list_head *rq = &spu_prio->runq[prio];
- spin_unlock_irqrestore(&wq->lock, flags);
+ if (list_empty(rq))
+ return NULL;
+ return list_entry(rq->next, struct spu_context, rq);
}
-static void spu_prio_wait(struct spu_context *ctx, u64 flags)
+static void spu_prio_wait(struct spu_context *ctx)
{
- int prio = current->prio;
- wait_queue_head_t *wq = &spu_prio->waitq[prio];
DEFINE_WAIT(wait);
- if (ctx->spu)
- return;
-
- spu_add_wq(wq, &wait, prio);
-
+ set_bit(SPU_SCHED_WAKE, &ctx->sched_flags);
+ prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE);
if (!signal_pending(current)) {
- up_write(&ctx->state_sema);
- pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__,
- current->pid, current->prio);
+ mutex_unlock(&ctx->state_mutex);
schedule();
- down_write(&ctx->state_sema);
+ mutex_lock(&ctx->state_mutex);
}
-
- spu_del_wq(wq, &wait, prio);
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&ctx->stop_wq, &wait);
+ clear_bit(SPU_SCHED_WAKE, &ctx->sched_flags);
}
-static void spu_prio_wakeup(void)
+/**
+ * spu_reschedule - try to find a runnable context for a spu
+ * @spu: spu available
+ *
+ * This function is called whenever a spu becomes idle. It looks for the
+ * most suitable runnable spu context and schedules it for execution.
+ */
+static void spu_reschedule(struct spu *spu)
{
- int best = sched_find_first_bit(spu_prio->bitmap);
- if (best < MAX_PRIO) {
- wait_queue_head_t *wq = &spu_prio->waitq[best];
- wake_up_interruptible_nr(wq, 1);
- }
-}
+ int best;
-static int get_active_spu(struct spu *spu)
-{
- int node = spu->node;
- struct spu *tmp;
- int rc = 0;
+ spu_free(spu);
- mutex_lock(&spu_prio->active_mutex[node]);
- list_for_each_entry(tmp, &spu_prio->active_list[node], list) {
- if (tmp == spu) {
- list_del_init(&spu->list);
- rc = 1;
- break;
- }
+ spin_lock(&spu_prio->runq_lock);
+ best = sched_find_first_bit(spu_prio->bitmap);
+ if (best < MAX_PRIO) {
+ struct spu_context *ctx = spu_grab_context(best);
+ if (ctx && test_bit(SPU_SCHED_WAKE, &ctx->sched_flags))
+ wake_up(&ctx->stop_wq);
}
- mutex_unlock(&spu_prio->active_mutex[node]);
- return rc;
-}
-
-static void put_active_spu(struct spu *spu)
-{
- int node = spu->node;
-
- mutex_lock(&spu_prio->active_mutex[node]);
- list_add_tail(&spu->list, &spu_prio->active_list[node]);
- mutex_unlock(&spu_prio->active_mutex[node]);
+ spin_unlock(&spu_prio->runq_lock);
}
-static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags)
+static struct spu *spu_get_idle(struct spu_context *ctx)
{
struct spu *spu = NULL;
int node = cpu_to_node(raw_smp_processor_id());
@@ -241,87 +315,154 @@ static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags)
return spu;
}
-static inline struct spu *spu_get(struct spu_context *ctx, u64 flags)
+/**
+ * find_victim - find a lower priority context to preempt
+ * @ctx: canidate context for running
+ *
+ * Returns the freed physical spu to run the new context on.
+ */
+static struct spu *find_victim(struct spu_context *ctx)
{
- /* Future: spu_get_idle() if possible,
- * otherwise try to preempt an active
- * context.
+ struct spu_context *victim = NULL;
+ struct spu *spu;
+ int node, n;
+
+ /*
+ * Look for a possible preemption candidate on the local node first.
+ * If there is no candidate look at the other nodes. This isn't
+ * exactly fair, but so far the whole spu schedule tries to keep
+ * a strong node affinity. We might want to fine-tune this in
+ * the future.
*/
- return spu_get_idle(ctx, flags);
+ restart:
+ node = cpu_to_node(raw_smp_processor_id());
+ for (n = 0; n < MAX_NUMNODES; n++, node++) {
+ node = (node < MAX_NUMNODES) ? node : 0;
+ if (!node_allowed(node))
+ continue;
+
+ mutex_lock(&spu_prio->active_mutex[node]);
+ list_for_each_entry(spu, &spu_prio->active_list[node], list) {
+ struct spu_context *tmp = spu->ctx;
+
+ if (tmp->rt_priority < ctx->rt_priority &&
+ (!victim || tmp->rt_priority < victim->rt_priority))
+ victim = spu->ctx;
+ }
+ mutex_unlock(&spu_prio->active_mutex[node]);
+
+ if (victim) {
+ /*
+ * This nests ctx->state_mutex, but we always lock
+ * higher priority contexts before lower priority
+ * ones, so this is safe until we introduce
+ * priority inheritance schemes.
+ */
+ if (!mutex_trylock(&victim->state_mutex)) {
+ victim = NULL;
+ goto restart;
+ }
+
+ spu = victim->spu;
+ if (!spu) {
+ /*
+ * This race can happen because we've dropped
+ * the active list mutex. No a problem, just
+ * restart the search.
+ */
+ mutex_unlock(&victim->state_mutex);
+ victim = NULL;
+ goto restart;
+ }
+ spu_unbind_context(spu, victim);
+ mutex_unlock(&victim->state_mutex);
+ return spu;
+ }
+ }
+
+ return NULL;
}
-/* The three externally callable interfaces
- * for the scheduler begin here.
+/**
+ * spu_activate - find a free spu for a context and execute it
+ * @ctx: spu context to schedule
+ * @flags: flags (currently ignored)
*
- * spu_activate - bind a context to SPU, waiting as needed.
- * spu_deactivate - unbind a context from its SPU.
- * spu_yield - yield an SPU if others are waiting.
+ * Tries to find a free spu to run @ctx. If no free spu is availble
+ * add the context to the runqueue so it gets woken up once an spu
+ * is available.
*/
-
-int spu_activate(struct spu_context *ctx, u64 flags)
+int spu_activate(struct spu_context *ctx, unsigned long flags)
{
- struct spu *spu;
- int ret = 0;
- for (;;) {
- if (ctx->spu)
+ if (ctx->spu)
+ return 0;
+
+ do {
+ struct spu *spu;
+
+ spu = spu_get_idle(ctx);
+ /*
+ * If this is a realtime thread we try to get it running by
+ * preempting a lower priority thread.
+ */
+ if (!spu && ctx->rt_priority)
+ spu = find_victim(ctx);
+ if (spu) {
+ spu_bind_context(spu, ctx);
return 0;
- spu = spu_get(ctx, flags);
- if (spu != NULL) {
- if (ctx->spu != NULL) {
- spu_free(spu);
- spu_prio_wakeup();
- break;
- }
- bind_context(spu, ctx);
- put_active_spu(spu);
- break;
}
- spu_prio_wait(ctx, flags);
- if (signal_pending(current)) {
- ret = -ERESTARTSYS;
- spu_prio_wakeup();
- break;
- }
- }
- return ret;
+
+ spu_add_to_rq(ctx);
+ if (!(flags & SPU_ACTIVATE_NOWAKE))
+ spu_prio_wait(ctx);
+ spu_del_from_rq(ctx);
+ } while (!signal_pending(current));
+
+ return -ERESTARTSYS;
}
+/**
+ * spu_deactivate - unbind a context from it's physical spu
+ * @ctx: spu context to unbind
+ *
+ * Unbind @ctx from the physical spu it is running on and schedule
+ * the highest priority context to run on the freed physical spu.
+ */
void spu_deactivate(struct spu_context *ctx)
{
- struct spu *spu;
- int needs_idle;
+ struct spu *spu = ctx->spu;
- spu = ctx->spu;
- if (!spu)
- return;
- needs_idle = get_active_spu(spu);
- unbind_context(spu, ctx);
- if (needs_idle) {
- spu_free(spu);
- spu_prio_wakeup();
+ if (spu) {
+ spu_unbind_context(spu, ctx);
+ spu_reschedule(spu);
}
}
+/**
+ * spu_yield - yield a physical spu if others are waiting
+ * @ctx: spu context to yield
+ *
+ * Check if there is a higher priority context waiting and if yes
+ * unbind @ctx from the physical spu and schedule the highest
+ * priority context to run on the freed physical spu instead.
+ */
void spu_yield(struct spu_context *ctx)
{
struct spu *spu;
int need_yield = 0;
- if (down_write_trylock(&ctx->state_sema)) {
+ if (mutex_trylock(&ctx->state_mutex)) {
if ((spu = ctx->spu) != NULL) {
int best = sched_find_first_bit(spu_prio->bitmap);
if (best < MAX_PRIO) {
pr_debug("%s: yielding SPU %d NODE %d\n",
__FUNCTION__, spu->number, spu->node);
spu_deactivate(ctx);
- ctx->state = SPU_STATE_SAVED;
need_yield = 1;
- } else {
- spu->prio = MAX_PRIO;
}
}
- up_write(&ctx->state_sema);
+ mutex_unlock(&ctx->state_mutex);
}
if (unlikely(need_yield))
yield();
@@ -331,14 +472,19 @@ int __init spu_sched_init(void)
{
int i;
+ spu_sched_wq = create_singlethread_workqueue("spusched");
+ if (!spu_sched_wq)
+ return 1;
+
spu_prio = kzalloc(sizeof(struct spu_prio_array), GFP_KERNEL);
if (!spu_prio) {
printk(KERN_WARNING "%s: Unable to allocate priority queue.\n",
__FUNCTION__);
+ destroy_workqueue(spu_sched_wq);
return 1;
}
for (i = 0; i < MAX_PRIO; i++) {
- init_waitqueue_head(&spu_prio->waitq[i]);
+ INIT_LIST_HEAD(&spu_prio->runq[i]);
__clear_bit(i, spu_prio->bitmap);
}
__set_bit(MAX_PRIO, spu_prio->bitmap);
@@ -346,6 +492,7 @@ int __init spu_sched_init(void)
mutex_init(&spu_prio->active_mutex[i]);
INIT_LIST_HEAD(&spu_prio->active_list[i]);
}
+ spin_lock_init(&spu_prio->runq_lock);
return 0;
}
@@ -364,4 +511,5 @@ void __exit spu_sched_exit(void)
mutex_unlock(&spu_prio->active_mutex[node]);
}
kfree(spu_prio);
+ destroy_workqueue(spu_sched_wq);
}
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 56864469215..0c437891dfd 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -23,7 +23,7 @@
#define SPUFS_H
#include <linux/kref.h>
-#include <linux/rwsem.h>
+#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/fs.h>
@@ -37,11 +37,13 @@ enum {
};
struct spu_context_ops;
-
-#define SPU_CONTEXT_PREEMPT 0UL
-
struct spu_gang;
+/* ctx->sched_flags */
+enum {
+ SPU_SCHED_WAKE = 0,
+};
+
struct spu_context {
struct spu *spu; /* pointer to a physical SPU */
struct spu_state csa; /* SPU context save area. */
@@ -51,10 +53,12 @@ struct spu_context {
struct address_space *cntl; /* 'control' area mappings. */
struct address_space *signal1; /* 'signal1' area mappings. */
struct address_space *signal2; /* 'signal2' area mappings. */
+ struct address_space *mss; /* 'mss' area mappings. */
+ struct address_space *psmap; /* 'psmap' area mappings. */
u64 object_id; /* user space pointer for oprofile */
enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state;
- struct rw_semaphore state_sema;
+ struct mutex state_mutex;
struct semaphore run_sema;
struct mm_struct *owner;
@@ -75,6 +79,14 @@ struct spu_context {
struct list_head gang_list;
struct spu_gang *gang;
+
+ /* scheduler fields */
+ struct list_head rq;
+ struct delayed_work sched_work;
+ unsigned long sched_flags;
+ unsigned long rt_priority;
+ int policy;
+ int prio;
};
struct spu_gang {
@@ -159,6 +171,16 @@ void spu_gang_remove_ctx(struct spu_gang *gang, struct spu_context *ctx);
void spu_gang_add_ctx(struct spu_gang *gang, struct spu_context *ctx);
/* context management */
+static inline void spu_acquire(struct spu_context *ctx)
+{
+ mutex_lock(&ctx->state_mutex);
+}
+
+static inline void spu_release(struct spu_context *ctx)
+{
+ mutex_unlock(&ctx->state_mutex);
+}
+
struct spu_context * alloc_spu_context(struct spu_gang *gang);
void destroy_spu_context(struct kref *kref);
struct spu_context * get_spu_context(struct spu_context *ctx);
@@ -166,20 +188,18 @@ int put_spu_context(struct spu_context *ctx);
void spu_unmap_mappings(struct spu_context *ctx);
void spu_forget(struct spu_context *ctx);
-void spu_acquire(struct spu_context *ctx);
-void spu_release(struct spu_context *ctx);
-int spu_acquire_runnable(struct spu_context *ctx);
+int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags);
void spu_acquire_saved(struct spu_context *ctx);
int spu_acquire_exclusive(struct spu_context *ctx);
-
-static inline void spu_release_exclusive(struct spu_context *ctx)
-{
- up_write(&ctx->state_sema);
-}
-
-int spu_activate(struct spu_context *ctx, u64 flags);
+enum {
+ SPU_ACTIVATE_NOWAKE = 1,
+};
+int spu_activate(struct spu_context *ctx, unsigned long flags);
void spu_deactivate(struct spu_context *ctx);
void spu_yield(struct spu_context *ctx);
+void spu_start_tick(struct spu_context *ctx);
+void spu_stop_tick(struct spu_context *ctx);
+void spu_sched_tick(struct work_struct *work);
int __init spu_sched_init(void);
void __exit spu_sched_exit(void);
diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c
index ffa7c2c2030..279d7339e17 100644
--- a/arch/powerpc/platforms/celleb/htab.c
+++ b/arch/powerpc/platforms/celleb/htab.c
@@ -95,7 +95,6 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
unsigned long lpar_rc;
unsigned long slot;
unsigned long hpte_v, hpte_r;
- unsigned long flags;
/* same as iseries */
if (vflags & HPTE_V_SECONDARY)
@@ -115,17 +114,17 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
hpte_r &= ~_PAGE_COHERENT;
- spin_lock_irqsave(&beat_htab_lock, flags);
+ spin_lock(&beat_htab_lock);
if ((lpar_rc = beat_read_mask(hpte_group)) == 0) {
if (!(vflags & HPTE_V_BOLTED))
DBG_LOW(" full\n");
- spin_unlock_irqrestore(&beat_htab_lock, flags);
+ spin_unlock(&beat_htab_lock);
return -1;
}
lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48,
hpte_v, hpte_r, &slot);
- spin_unlock_irqrestore(&beat_htab_lock, flags);
+ spin_unlock(&beat_htab_lock);
/*
* Since we try and ioremap PHBs we don't own, the pte insert
@@ -189,7 +188,6 @@ static long beat_lpar_hpte_updatepp(unsigned long slot,
{
unsigned long lpar_rc;
unsigned long dummy0, dummy1, want_v;
- unsigned long flags;
want_v = hpte_encode_v(va, psize);
@@ -197,17 +195,17 @@ static long beat_lpar_hpte_updatepp(unsigned long slot,
"avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
want_v & HPTE_V_AVPN, slot, psize, newpp);
- spin_lock_irqsave(&beat_htab_lock, flags);
+ spin_lock(&beat_htab_lock);
dummy0 = beat_lpar_hpte_getword0(slot);
if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) {
DBG_LOW("not found !\n");
- spin_unlock_irqrestore(&beat_htab_lock, flags);
+ spin_unlock(&beat_htab_lock);
return -1;
}
lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0,
&dummy1);
- spin_unlock_irqrestore(&beat_htab_lock, flags);
+ spin_unlock(&beat_htab_lock);
if (lpar_rc != 0 || dummy0 == 0) {
DBG_LOW("not found !\n");
return -1;
@@ -256,18 +254,17 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp,
int psize)
{
unsigned long lpar_rc, slot, vsid, va, dummy0, dummy1;
- unsigned long flags;
vsid = get_kernel_vsid(ea);
va = (vsid << 28) | (ea & 0x0fffffff);
- spin_lock_irqsave(&beat_htab_lock, flags);
+ spin_lock(&beat_htab_lock);
slot = beat_lpar_hpte_find(va, psize);
BUG_ON(slot == -1);
lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7,
&dummy0, &dummy1);
- spin_unlock_irqrestore(&beat_htab_lock, flags);
+ spin_unlock(&beat_htab_lock);
BUG_ON(lpar_rc != 0);
}
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 61599d919ea..3f6c4114f90 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/initrd.h>
-#include <linux/root_dev.h>
#include <linux/mtd/physmap.h>
#include <asm/time.h>
@@ -91,17 +90,6 @@ static void __init linkstation_setup_arch(void)
ARRAY_SIZE(linkstation_physmap_partitions));
#endif
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-
/* Lookup PCI host bridges */
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index d1929721b0e..a397e4e17c1 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -170,31 +170,6 @@ static int __init construct_spu(struct spu *spu)
return result;
}
-static int __init add_spu_pages(unsigned long start_addr, unsigned long size)
-{
- int result;
- unsigned long start_pfn;
- unsigned long nr_pages;
- struct pglist_data *pgdata;
- struct zone *zone;
-
- BUG_ON(!mem_init_done);
-
- start_pfn = start_addr >> PAGE_SHIFT;
- nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
-
- pgdata = NODE_DATA(0);
- zone = pgdata->node_zones;
-
- result = __add_pages(zone, start_pfn, nr_pages);
-
- if (result)
- pr_debug("%s:%d: __add_pages failed: (%d)\n",
- __func__, __LINE__, result);
-
- return result;
-}
-
static void spu_unmap(struct spu *spu)
{
iounmap(spu->priv2);
@@ -206,19 +181,6 @@ static void spu_unmap(struct spu *spu)
static int __init setup_areas(struct spu *spu)
{
struct table {char* name; unsigned long addr; unsigned long size;};
- int result;
-
- /* setup pages */
-
- result = add_spu_pages(spu->local_store_phys, LS_SIZE);
- if (result)
- goto fail_add;
-
- result = add_spu_pages(spu->problem_phys, sizeof(struct spu_problem));
- if (result)
- goto fail_add;
-
- /* ioremap */
spu_pdata(spu)->shadow = __ioremap(
spu_pdata(spu)->shadow_addr, sizeof(struct spe_shadow),
@@ -260,8 +222,8 @@ static int __init setup_areas(struct spu *spu)
fail_ioremap:
spu_unmap(spu);
-fail_add:
- return result;
+
+ return -ENOMEM;
}
static int __init setup_interrupts(struct spu *spu)
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 69590fbf83d..dc0583bdbc6 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o
+obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
diff --git a/arch/powerpc/platforms/pseries/firmware.h b/arch/powerpc/platforms/pseries/firmware.h
deleted file mode 100644
index 714f56f5536..00000000000
--- a/arch/powerpc/platforms/pseries/firmware.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2006 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _PSERIES_FIRMWARE_H
-#define _PSERIES_FIRMWARE_H
-
-#include <asm/firmware.h>
-
-extern void __init fw_feature_init(void);
-
-#endif /* _PSERIES_FIRMWARE_H */
diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c
new file mode 100644
index 00000000000..af268560745
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/kexec.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2006 Michael Ellerman, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/firmware.h>
+#include <asm/kexec.h>
+#include <asm/mpic.h>
+
+#include "pseries.h"
+#include "xics.h"
+#include "plpar_wrappers.h"
+
+static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+ /* Don't risk a hypervisor call if we're crashing */
+ if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
+ unsigned long addr;
+
+ addr = __pa(get_slb_shadow());
+ if (unregister_slb_shadow(hard_smp_processor_id(), addr))
+ printk("SLB shadow buffer deregistration of "
+ "cpu %u (hw_cpu_id %d) failed\n",
+ smp_processor_id(),
+ hard_smp_processor_id());
+
+ addr = __pa(get_lppaca());
+ if (unregister_vpa(hard_smp_processor_id(), addr)) {
+ printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
+ "failed\n", smp_processor_id(),
+ hard_smp_processor_id());
+ }
+ }
+}
+
+static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary)
+{
+ pseries_kexec_cpu_down(crash_shutdown, secondary);
+ mpic_teardown_this_cpu(secondary);
+}
+
+void __init setup_kexec_cpu_down_mpic(void)
+{
+ ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic;
+}
+
+static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary)
+{
+ pseries_kexec_cpu_down(crash_shutdown, secondary);
+ xics_teardown_cpu(secondary);
+}
+
+void __init setup_kexec_cpu_down_xics(void)
+{
+ ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics;
+}
+
+static int __init pseries_kexec_setup(void)
+{
+ ppc_md.machine_kexec = default_machine_kexec;
+ ppc_md.machine_kexec_prepare = default_machine_kexec_prepare;
+ ppc_md.machine_crash_shutdown = default_machine_crash_shutdown;
+
+ return 0;
+}
+__initcall(pseries_kexec_setup);
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index c69bd15ced9..fa59124ce3f 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -98,6 +98,10 @@ static void fixup_winbond_82c105(struct pci_dev* dev)
if (dev->resource[i].flags & IORESOURCE_IO
&& dev->bus->number == 0 && dev->devfn == 0x81)
dev->resource[i].flags &= ~IORESOURCE_IO;
+ if (dev->resource[i].start == 0 && dev->resource[i].end) {
+ dev->resource[i].flags = 0;
+ dev->resource[i].end = 0;
+ }
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
new file mode 100644
index 00000000000..b43f1397a5b
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2006 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PSERIES_PSERIES_H
+#define _PSERIES_PSERIES_H
+
+extern void __init fw_feature_init(void);
+
+struct pt_regs;
+
+extern int pSeries_system_reset_exception(struct pt_regs *regs);
+extern int pSeries_machine_check_exception(struct pt_regs *regs);
+
+#ifdef CONFIG_SMP
+extern void smp_init_pseries_mpic(void);
+extern void smp_init_pseries_xics(void);
+#else
+static inline smp_init_pseries_mpic(void) { };
+static inline smp_init_pseries_xics(void) { };
+#endif
+
+#ifdef CONFIG_KEXEC
+extern void setup_kexec_cpu_down_xics(void);
+extern void setup_kexec_cpu_down_mpic(void);
+#else
+static inline setup_kexec_cpu_down_xics(void) { };
+static inline setup_kexec_cpu_down_mpic(void) { };
+#endif
+
+#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index b1d3d161249..edc03887311 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -51,7 +51,7 @@
#include <asm/udbg.h>
#include <asm/firmware.h>
-#include "ras.h"
+#include "pseries.h"
static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(ras_log_buf_lock);
diff --git a/arch/powerpc/platforms/pseries/ras.h b/arch/powerpc/platforms/pseries/ras.h
deleted file mode 100644
index 0e66b0da55e..00000000000
--- a/arch/powerpc/platforms/pseries/ras.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _PSERIES_RAS_H
-#define _PSERIES_RAS_H
-
-struct pt_regs;
-
-extern int pSeries_system_reset_exception(struct pt_regs *regs);
-extern int pSeries_machine_check_exception(struct pt_regs *regs);
-
-#endif /* _PSERIES_RAS_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 042ecae107a..435a0459652 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -55,7 +55,6 @@
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/irq.h>
-#include <asm/kexec.h>
#include <asm/time.h>
#include <asm/nvram.h>
#include "xics.h"
@@ -65,10 +64,10 @@
#include <asm/i8259.h>
#include <asm/udbg.h>
#include <asm/smp.h>
+#include <asm/firmware.h>
#include "plpar_wrappers.h"
-#include "ras.h"
-#include "firmware.h"
+#include "pseries.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -77,8 +76,6 @@
#endif
/* move those away to a .h */
-extern void smp_init_pseries_mpic(void);
-extern void smp_init_pseries_xics(void);
extern void find_udbg_vterm(void);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
@@ -221,42 +218,6 @@ static void pseries_lpar_enable_pmcs(void)
get_lppaca()->pmcregs_in_use = 1;
}
-#ifdef CONFIG_KEXEC
-static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
-{
- /* Don't risk a hypervisor call if we're crashing */
- if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
- unsigned long addr;
-
- addr = __pa(get_slb_shadow());
- if (unregister_slb_shadow(hard_smp_processor_id(), addr))
- printk("SLB shadow buffer deregistration of "
- "cpu %u (hw_cpu_id %d) failed\n",
- smp_processor_id(),
- hard_smp_processor_id());
-
- addr = __pa(get_lppaca());
- if (unregister_vpa(hard_smp_processor_id(), addr)) {
- printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
- "failed\n", smp_processor_id(),
- hard_smp_processor_id());
- }
- }
-}
-
-static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary)
-{
- pseries_kexec_cpu_down(crash_shutdown, secondary);
- mpic_teardown_this_cpu(secondary);
-}
-
-static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary)
-{
- pseries_kexec_cpu_down(crash_shutdown, secondary);
- xics_teardown_cpu(secondary);
-}
-#endif /* CONFIG_KEXEC */
-
static void __init pseries_discover_pic(void)
{
struct device_node *np;
@@ -269,21 +230,13 @@ static void __init pseries_discover_pic(void)
pSeries_mpic_node = of_node_get(np);
ppc_md.init_IRQ = pseries_mpic_init_IRQ;
ppc_md.get_irq = mpic_get_irq;
-#ifdef CONFIG_KEXEC
- ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic;
-#endif
-#ifdef CONFIG_SMP
+ setup_kexec_cpu_down_mpic();
smp_init_pseries_mpic();
-#endif
return;
} else if (strstr(typep, "ppc-xicp")) {
ppc_md.init_IRQ = xics_init_IRQ;
-#ifdef CONFIG_KEXEC
- ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics;
-#endif
-#ifdef CONFIG_SMP
+ setup_kexec_cpu_down_xics();
smp_init_pseries_xics();
-#endif
return;
}
}
@@ -554,9 +507,4 @@ define_machine(pseries) {
.check_legacy_ioport = pSeries_check_legacy_ioport,
.system_reset_exception = pSeries_system_reset_exception,
.machine_check_exception = pSeries_machine_check_exception,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 4408518eaeb..116305b22a2 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -48,6 +48,7 @@
#include <asm/vdso_datapage.h>
#include "plpar_wrappers.h"
+#include "pseries.h"
#ifdef DEBUG
#include <asm/udbg.h>
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 9f2a9a444bf..34161bc5a02 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void)
{
struct device_node *np;
unsigned int i;
- struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL;
+ struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
+ *usb_dev_dr_client = NULL;
int ret;
for (np = NULL, i = 0;
@@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void)
of_irq_to_resource(np, 0, &r[1]);
- usb_dev_dr =
- platform_device_register_simple("fsl-ehci", i, r, 2);
- if (IS_ERR(usb_dev_dr)) {
- ret = PTR_ERR(usb_dev_dr);
+ prop = get_property(np, "dr_mode", NULL);
+
+ if (!prop || !strcmp(prop, "host")) {
+ usb_data.operating_mode = FSL_USB2_DR_HOST;
+ usb_dev_dr_host = platform_device_register_simple(
+ "fsl-ehci", i, r, 2);
+ if (IS_ERR(usb_dev_dr_host)) {
+ ret = PTR_ERR(usb_dev_dr_host);
+ goto err;
+ }
+ } else if (prop && !strcmp(prop, "peripheral")) {
+ usb_data.operating_mode = FSL_USB2_DR_DEVICE;
+ usb_dev_dr_client = platform_device_register_simple(
+ "fsl-usb2-udc", i, r, 2);
+ if (IS_ERR(usb_dev_dr_client)) {
+ ret = PTR_ERR(usb_dev_dr_client);
+ goto err;
+ }
+ } else if (prop && !strcmp(prop, "otg")) {
+ usb_data.operating_mode = FSL_USB2_DR_OTG;
+ usb_dev_dr_host = platform_device_register_simple(
+ "fsl-ehci", i, r, 2);
+ if (IS_ERR(usb_dev_dr_host)) {
+ ret = PTR_ERR(usb_dev_dr_host);
+ goto err;
+ }
+ usb_dev_dr_client = platform_device_register_simple(
+ "fsl-usb2-udc", i, r, 2);
+ if (IS_ERR(usb_dev_dr_client)) {
+ ret = PTR_ERR(usb_dev_dr_client);
+ goto err;
+ }
+ } else {
+ ret = -EINVAL;
goto err;
}
- usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL;
- usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask;
-
- usb_data.operating_mode = FSL_USB2_DR_HOST;
-
prop = get_property(np, "phy_type", NULL);
usb_data.phy_mode = determine_usb_phy(prop);
- ret =
- platform_device_add_data(usb_dev_dr, &usb_data,
- sizeof(struct
- fsl_usb2_platform_data));
- if (ret)
- goto unreg_dr;
+ if (usb_dev_dr_host) {
+ usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL;
+ usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host->
+ dev.coherent_dma_mask;
+ if ((ret = platform_device_add_data(usb_dev_dr_host,
+ &usb_data, sizeof(struct
+ fsl_usb2_platform_data))))
+ goto unreg_dr;
+ }
+ if (usb_dev_dr_client) {
+ usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL;
+ usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client->
+ dev.coherent_dma_mask;
+ if ((ret = platform_device_add_data(usb_dev_dr_client,
+ &usb_data, sizeof(struct
+ fsl_usb2_platform_data))))
+ goto unreg_dr;
+ }
}
return 0;
unreg_dr:
- if (usb_dev_dr)
- platform_device_unregister(usb_dev_dr);
+ if (usb_dev_dr_host)
+ platform_device_unregister(usb_dev_dr_host);
+ if (usb_dev_dr_client)
+ platform_device_unregister(usb_dev_dr_client);
unreg_mph:
if (usb_dev_mph)
platform_device_unregister(usb_dev_mph);
@@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void)
if (ret)
goto unreg;
}
-
+
of_node_put(phy);
of_node_put(mdio);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index aa701cc27ec..4e54a09dd33 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1395,4 +1395,25 @@ void smp_mpic_message_pass(int target, int msg)
break;
}
}
+
+int __init smp_mpic_probe(void)
+{
+ int nr_cpus;
+
+ DBG("smp_mpic_probe()...\n");
+
+ nr_cpus = cpus_weight(cpu_possible_map);
+
+ DBG("nr_cpus: %d\n", nr_cpus);
+
+ if (nr_cpus > 1)
+ mpic_request_ipis();
+
+ return nr_cpus;
+}
+
+void __devinit smp_mpic_setup_cpu(int cpu)
+{
+ mpic_setup_this_cpu();
+}
#endif /* CONFIG_SMP */
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index 47b56203f47..0e97e5c94f8 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -179,7 +179,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs->us_info = us_info;
uccs->saved_uccm = 0;
uccs->p_rx_frame = 0;
- uccs->us_regs = us_info->us_regs;
+ uccs->us_regs = us_info->regs;
us_regs = uccs->us_regs;
uccs->p_ucce = (u16 *) & (us_regs->ucce);
uccs->p_uccm = (u16 *) & (us_regs->uccm);
@@ -206,7 +206,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
/* Init Guemr register */
- if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) {
+ if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) {
uccs_err("ucc_slow_init: Could not init the guemr register.");
ucc_slow_free(uccs);
return ret;
@@ -214,7 +214,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Set UCC to slow type */
if ((ret = ucc_set_type(us_info->ucc_num,
- (struct ucc_common *) (us_info->us_regs),
+ (struct ucc_common *) (us_info->regs),
UCC_SPEED_TYPE_SLOW))) {
uccs_err("ucc_slow_init: Could not init the guemr register.");
ucc_slow_free(uccs);
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 77540a2f770..0183e5fbaf4 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2811,7 +2811,6 @@ static void dump_spu_fields(struct spu *spu)
DUMP_FIELD(spu, "0x%lx", irqs[2]);
DUMP_FIELD(spu, "0x%x", slb_replace);
DUMP_FIELD(spu, "%d", pid);
- DUMP_FIELD(spu, "%d", prio);
DUMP_FIELD(spu, "0x%p", mm);
DUMP_FIELD(spu, "0x%p", ctx);
DUMP_FIELD(spu, "0x%p", rq);
diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig
new file mode 100644
index 00000000000..1ca0204267b
--- /dev/null
+++ b/arch/ppc/configs/taishan_defconfig
@@ -0,0 +1,1077 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Mon Feb 12 11:11:58 2007
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_DCR_NATIVE=y
+CONFIG_PPC_DCR=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+CONFIG_WANT_EARLY_SERIAL=y
+
+#
+# IBM 4xx options
+#
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_LUAN is not set
+# CONFIG_YUCCA is not set
+# CONFIG_OCOTEA is not set
+CONFIG_TAISHAN=y
+CONFIG_440GX=y
+CONFIG_440A=y
+CONFIG_IBM_OCP=y
+CONFIG_IBM_EMAC4=y
+CONFIG_PPC4xx_DMA=y
+CONFIG_PPC4xx_EDMA=y
+CONFIG_PPC_GEN550=y
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on console=ttyS0,115200"
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=128
+CONFIG_IBM_EMAC_TXB=128
+CONFIG_IBM_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y
+# CONFIG_IBM_EMAC_DEBUG is not set
+CONFIG_IBM_EMAC_ZMII=y
+CONFIG_IBM_EMAC_RGMII=y
+CONFIG_IBM_EMAC_TAH=y
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=y
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+CONFIG_PPC_OCP=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S
index 66877bdfe0b..1f155d399d5 100644
--- a/arch/ppc/kernel/head_fsl_booke.S
+++ b/arch/ppc/kernel/head_fsl_booke.S
@@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
- li r6,0
+ mfspr r6,SPRN_MAS1
+ rlwinm r6,r6,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r6
tlbwe
/* Invalidate TLB1 */
@@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre
+ mfspr r8,SPRN_MAS1
+ rlwinm r8,r8,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r8
tlbwe
/* Invalidate TLB1 */
@@ -889,7 +892,6 @@ load_up_spe:
REST_GPR(9, r11)
REST_GPR(12, r11)
lwz r11,GPR11(r11)
- SYNC
rfi
/*
@@ -953,7 +955,6 @@ _GLOBAL(giveup_altivec)
_GLOBAL(giveup_spe)
mfmsr r5
oris r5,r5,MSR_SPE@h
- SYNC
mtmsr r5 /* enable use of SPE now */
isync
cmpi 0,r3,0
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 1f49503317c..1318b6f4c3d 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -271,7 +271,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
extern long *intercept_table;
EXPORT_SYMBOL(intercept_table);
#endif /* CONFIG_PPC_STD_MMU */
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_DCR_NATIVE
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 82b06a1ef95..c023b729880 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -314,7 +314,7 @@ void __init mapin_ram(void)
}
/* is x a power of 4? */
-#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1))
+#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)
/*
* Set up a mapping for a block of I/O.
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 6980de420e9..705ae56016f 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -98,6 +98,12 @@ config OCOTEA
help
This option enables support for the IBM PPC440GX evaluation board.
+config TAISHAN
+ bool "Taishan"
+ select WANT_EARLY_SERIAL
+ help
+ This option enables support for the AMCC PPC440GX evaluation board.
+
endchoice
config EP405PC
@@ -126,7 +132,7 @@ config 440GP
config 440GX
bool
- depends on OCOTEA
+ depends on OCOTEA || TAISHAN
default y
config 440SP
@@ -173,7 +179,7 @@ config BOOKE
config IBM_OCP
bool
- depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+ depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT
default y
config IBM_EMAC4
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index a04a0d0a0f5..fa6610bccaf 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_OCOTEA) += ocotea.o
obj-$(CONFIG_REDWOOD_5) += redwood5.o
obj-$(CONFIG_REDWOOD_6) += redwood6.o
obj-$(CONFIG_SYCAMORE) += sycamore.o
+obj-$(CONFIG_TAISHAN) += taishan.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o
obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
new file mode 100644
index 00000000000..bb0253eef45
--- /dev/null
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -0,0 +1,395 @@
+/*
+ * arch/ppc/platforms/4xx/taishan.c
+ *
+ * AMCC Taishan board specific routines
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/ndfc.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/bootinfo.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/gen550.h>
+#include <syslib/ibm440gx_common.h>
+
+extern bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+/*
+ * NOR FLASH configuration (using mtd physmap driver)
+ */
+
+/* start will be added dynamically, end is always fixed */
+static struct resource taishan_nor_resource = {
+ .start = TAISHAN_FLASH_ADDR,
+ .end = 0x1ffffffffULL,
+ .flags = IORESOURCE_MEM,
+};
+
+#define RW_PART0_OF 0
+#define RW_PART0_SZ 0x180000
+#define RW_PART1_SZ 0x200000
+/* Partition 2 will be autosized dynamically... */
+#define RW_PART3_SZ 0x80000
+#define RW_PART4_SZ 0x40000
+
+static struct mtd_partition taishan_nor_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = RW_PART0_SZ
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_APPEND,
+ .size = RW_PART1_SZ,
+ },
+ {
+ .name = "user",
+ .offset = MTDPART_OFS_APPEND,
+/* .size = RW_PART2_SZ */ /* will be adjusted dynamically */
+ },
+ {
+ .name = "env",
+ .offset = MTDPART_OFS_APPEND,
+ .size = RW_PART3_SZ,
+ },
+ {
+ .name = "u-boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = RW_PART4_SZ,
+ }
+};
+
+static struct physmap_flash_data taishan_nor_data = {
+ .width = 4,
+ .parts = taishan_nor_parts,
+ .nr_parts = ARRAY_SIZE(taishan_nor_parts),
+};
+
+static struct platform_device taishan_nor_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &taishan_nor_data,
+ },
+ .num_resources = 1,
+ .resource = &taishan_nor_resource,
+};
+
+static int taishan_setup_flash(void)
+{
+ /*
+ * Adjust partition 2 to flash size
+ */
+ taishan_nor_parts[2].size = __res.bi_flashsize -
+ RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ;
+
+ platform_device_register(&taishan_nor_device);
+
+ return 0;
+}
+arch_initcall(taishan_setup_flash);
+
+static void __init
+taishan_calibrate_decr(void)
+{
+ unsigned int freq;
+
+ if (mfspr(SPRN_CCR1) & CCR1_TCS)
+ freq = TAISHAN_TMR_CLK;
+ else
+ freq = clocks.cpu;
+
+ ibm44x_calibrate_decr(freq);
+}
+
+static int
+taishan_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: AMCC\n");
+ seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n");
+ ibm440gx_show_cpuinfo(m);
+ return 0;
+}
+
+static inline int
+taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 23, 24, 25, 26 }, /* IDSEL 1 - PCI Slot 0 */
+ { 24, 25, 26, 23 }, /* IDSEL 2 - PCI Slot 1 */
+ };
+
+ const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __init taishan_set_emacdata(void)
+{
+ struct ocp_def *def;
+ struct ocp_func_emac_data *emacdata;
+ int i;
+
+ /* Set phy_map, phy_mode, and mac_addr for each EMAC */
+ for (i=2; i<4; i++) {
+ def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
+ emacdata = def->additions;
+ if (i < 2) {
+ emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+ emacdata->phy_mode = PHY_MODE_SMII;
+ } else {
+ emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+ emacdata->phy_mode = PHY_MODE_RGMII;
+ }
+ if (i == 0)
+ memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
+ else if (i == 1)
+ memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
+ else if (i == 2)
+ memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+ else if (i == 3)
+ memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
+ }
+}
+
+#define PCIX_READW(offset) \
+ (readw(pcix_reg_base+offset))
+
+#define PCIX_WRITEW(value, offset) \
+ (writew(value, pcix_reg_base+offset))
+
+#define PCIX_WRITEL(value, offset) \
+ (writel(value, pcix_reg_base+offset))
+
+/*
+ * FIXME: This is only here to "make it work". This will move
+ * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
+ * configuration library. -Matt
+ */
+static void __init
+taishan_setup_pcix(void)
+{
+ void *pcix_reg_base;
+
+ pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
+
+ /* Enable PCIX0 I/O, Mem, and Busmaster cycles */
+ PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
+
+ /* Disable all windows */
+ PCIX_WRITEL(0, PCIX0_POM0SA);
+ PCIX_WRITEL(0, PCIX0_POM1SA);
+ PCIX_WRITEL(0, PCIX0_POM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SA);
+ PCIX_WRITEL(0, PCIX0_PIM0SAH);
+ PCIX_WRITEL(0, PCIX0_PIM1SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SA);
+ PCIX_WRITEL(0, PCIX0_PIM2SAH);
+
+ /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
+ PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
+ PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
+ PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
+ PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
+ PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
+
+ /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
+ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
+ PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
+ PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
+
+ iounmap(pcix_reg_base);
+
+ eieio();
+}
+
+static void __init
+taishan_setup_hose(void)
+{
+ struct pci_controller *hose;
+
+ /* Configure windows on the PCI-X host bridge */
+ taishan_setup_pcix();
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET;
+
+ pci_init_resource(&hose->io_resource,
+ TAISHAN_PCI_LOWER_IO,
+ TAISHAN_PCI_UPPER_IO,
+ IORESOURCE_IO,
+ "PCI host bridge");
+
+ pci_init_resource(&hose->mem_resources[0],
+ TAISHAN_PCI_LOWER_MEM,
+ TAISHAN_PCI_UPPER_MEM,
+ IORESOURCE_MEM,
+ "PCI host bridge");
+
+ hose->io_space.start = TAISHAN_PCI_LOWER_IO;
+ hose->io_space.end = TAISHAN_PCI_UPPER_IO;
+ hose->mem_space.start = TAISHAN_PCI_LOWER_MEM;
+ hose->mem_space.end = TAISHAN_PCI_UPPER_MEM;
+ hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE);
+ isa_io_base = (unsigned long) hose->io_base_virt;
+
+ setup_indirect_pci(hose,
+ TAISHAN_PCI_CFGA_PLB32,
+ TAISHAN_PCI_CFGD_PLB32);
+ hose->set_cfg_type = 1;
+
+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = taishan_map_irq;
+}
+
+
+static void __init
+taishan_early_serial_map(void)
+{
+ struct uart_port port;
+
+ /* Setup ioremapped serial port access */
+ memset(&port, 0, sizeof(port));
+ port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
+ port.irq = UART0_INT;
+ port.uartclk = clocks.uart0;
+ port.regshift = 0;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ port.line = 0;
+
+ if (early_serial_setup(&port) != 0)
+ printk("Early serial init of port 0 failed\n");
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ /* Configure debug serial access */
+ gen550_init(0, &port);
+
+ /* Purge TLB entry added in head_44x.S for early serial access */
+ _tlbie(UART0_IO_BASE);
+#endif
+
+ port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
+ port.irq = UART1_INT;
+ port.uartclk = clocks.uart1;
+ port.line = 1;
+
+ if (early_serial_setup(&port) != 0)
+ printk("Early serial init of port 1 failed\n");
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ /* Configure debug serial access */
+ gen550_init(1, &port);
+#endif
+}
+
+static void __init
+taishan_setup_arch(void)
+{
+ taishan_set_emacdata();
+
+ ibm440gx_tah_enable();
+
+ /*
+ * Determine various clocks.
+ * To be completely correct we should get SysClk
+ * from FPGA, because it can be changed by on-board switches
+ * --ebs
+ */
+ ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+ ocp_sys_info.opb_bus_freq = clocks.opb;
+
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000/HZ;
+
+ /* Setup PCI host bridge */
+ taishan_setup_hose();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ taishan_early_serial_map();
+
+ /* Identify the system */
+ printk("AMCC PowerPC 440GX Taishan Platform\n");
+}
+
+static void __init taishan_init(void)
+{
+ ibm440gx_l2c_setup(&clocks);
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+ unsigned long r5, unsigned long r6, unsigned long r7)
+{
+ ibm44x_platform_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = taishan_setup_arch;
+ ppc_md.show_cpuinfo = taishan_show_cpuinfo;
+ ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
+
+ ppc_md.calibrate_decr = taishan_calibrate_decr;
+
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = taishan_early_serial_map;
+#endif
+ ppc_md.init = taishan_init;
+}
+
diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h
new file mode 100644
index 00000000000..ea7561a8045
--- /dev/null
+++ b/arch/ppc/platforms/4xx/taishan.h
@@ -0,0 +1,67 @@
+/*
+ * arch/ppc/platforms/4xx/taishan.h
+ *
+ * AMCC Taishan board definitions
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_TAISHAN_H__
+#define __ASM_TAISHAN_H__
+
+#include <platforms/4xx/ibm440gx.h>
+
+/* External timer clock frequency */
+#define TAISHAN_TMR_CLK 25000000
+
+/* Flash */
+#define TAISHAN_FPGA_ADDR 0x0000000141000000ULL
+#define TAISHAN_LCM_ADDR 0x0000000142000000ULL
+#define TAISHAN_FLASH_ADDR 0x00000001fc000000ULL
+#define TAISHAN_FLASH_SIZE 0x4000000
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE 2
+
+/* head_44x.S created UART mapping, used before early_serial_setup.
+ * We cannot use default OpenBIOS UART mappings because they
+ * don't work for configurations with more than 512M RAM. --ebs
+ */
+#define UART0_IO_BASE 0xF0000200
+#define UART1_IO_BASE 0xF0000300
+
+#define BASE_BAUD 11059200/16
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, UART##num##_INT, \
+ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ iomem_base: (void*)UART##num##_IO_BASE, \
+ io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS \
+ STD_UART_OP(0) \
+ STD_UART_OP(1)
+
+/* PCI support */
+#define TAISHAN_PCI_LOWER_IO 0x00000000
+#define TAISHAN_PCI_UPPER_IO 0x0000ffff
+#define TAISHAN_PCI_LOWER_MEM 0x80000000
+#define TAISHAN_PCI_UPPER_MEM 0xffffefff
+
+#define TAISHAN_PCI_CFGA_PLB32 0x0ec00000
+#define TAISHAN_PCI_CFGD_PLB32 0x0ec00004
+
+#define TAISHAN_PCI_IO_BASE 0x0000000208000000ULL
+#define TAISHAN_PCI_IO_SIZE 0x00010000
+#define TAISHAN_PCI_MEM_OFFSET 0x00000000
+
+#endif /* __ASM_TAISHAN_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index d84f0466697..09911118c67 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_SANDPOINT) += pci_auto.o todc_time.o
obj-$(CONFIG_SBC82xx) += todc_time.o
obj-$(CONFIG_SPRUCE) += cpc700_pic.o pci_auto.o \
todc_time.o
+obj-$(CONFIG_TAISHAN) += pci_auto.o
obj-$(CONFIG_8260) += m8260_setup.o pq2_devices.o pq2_sys.o \
ppc_sys.o
obj-$(CONFIG_PCI_8260) += m82xx_pci.o pci_auto.o
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index d7378df4497..29e1809e5ec 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -484,10 +484,8 @@ mpc52xx_ata_resume(struct of_device *op)
static struct of_device_id mpc52xx_ata_of_match[] = {
{
- .compatible = "mpc5200-ata",
- },
- {
- .compatible = "mpc52xx-ata",
+ .type = "ata",
+ .compatible = "mpc5200-ata",
},
{},
};
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index 1c7d6f221b5..b77ef5187d6 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -574,8 +574,8 @@ static struct adb_request led_request;
static int leds_pending[16];
static int leds_req_pending;
static int pending_devs[16];
-static int pending_led_start=0;
-static int pending_led_end=0;
+static int pending_led_start;
+static int pending_led_end;
static DEFINE_SPINLOCK(leds_lock);
static void leds_done(struct adb_request *req)
diff --git a/drivers/macintosh/apm_emu.c b/drivers/macintosh/apm_emu.c
index a6d50f4fabd..c5e4d43f97f 100644
--- a/drivers/macintosh/apm_emu.c
+++ b/drivers/macintosh/apm_emu.c
@@ -102,7 +102,7 @@ static struct pmu_sleep_notifier apm_sleep_notifier = {
SLEEP_LEVEL_USERLAND,
};
-static char driver_version[] = "0.5"; /* no spaces */
+static const char driver_version[] = "0.5"; /* no spaces */
#ifdef DEBUG
static char * apm_event_name[] = {
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index ee6b4ca6913..f632cec9ce4 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -17,10 +17,10 @@
static struct input_dev *emumousebtn;
static int emumousebtn_input_register(void);
-static int mouse_emulate_buttons = 0;
+static int mouse_emulate_buttons;
static int mouse_button2_keycode = KEY_RIGHTCTRL; /* right control key */
static int mouse_button3_keycode = KEY_RIGHTALT; /* right option key */
-static int mouse_last_keycode = 0;
+static int mouse_last_keycode;
#if defined(CONFIG_SYSCTL)
/* file(s) in /proc/sys/dev/mac_hid */
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 3d3bf1643e7..a7ce5592663 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -48,11 +48,11 @@ static u8 FAN_SPD_SET[2] = {0x30, 0x31};
static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
-static const char *sensor_location[3] = {NULL, NULL, NULL};
+static const char *sensor_location[3];
-static int limit_adjust = 0;
+static int limit_adjust;
static int fan_speed = -1;
-static int verbose = 0;
+static int verbose;
MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index df66291b132..3797f503cd6 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -86,7 +86,7 @@ static int data_index;
#ifdef CONFIG_PPC
static struct device_node *vias;
#endif
-static int cuda_fully_inited = 0;
+static int cuda_fully_inited;
#ifdef CONFIG_ADB
static int cuda_probe(void);
diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c
index 5d88d5b0ad9..175b3e56e37 100644
--- a/drivers/macintosh/via-macii.c
+++ b/drivers/macintosh/via-macii.c
@@ -107,10 +107,10 @@ static enum macii_state {
awaiting_reply
} macii_state;
-static int need_poll = 0;
-static int command_byte = 0;
-static int last_reply = 0;
-static int last_active = 0;
+static int need_poll;
+static int command_byte;
+static int last_reply;
+static int last_active;
static struct adb_request *current_req;
static struct adb_request *last_req;
@@ -124,7 +124,7 @@ static int first_byte;
static int prefix_len;
static int status = ST_IDLE|TREQ;
static int last_status;
-static int driver_running = 0;
+static int driver_running;
/* debug level 10 required for ADB logging (should be && debug_adb, ideally) */
diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c
index 1f0aa5dc9aa..10051db48d2 100644
--- a/drivers/macintosh/via-maciisi.c
+++ b/drivers/macintosh/via-maciisi.c
@@ -63,10 +63,10 @@ static volatile unsigned char *via;
#undef DEBUG_MACIISI_ADB
-static struct adb_request* current_req = NULL;
-static struct adb_request* last_req = NULL;
+static struct adb_request* current_req;
+static struct adb_request* last_req;
static unsigned char maciisi_rbuf[16];
-static unsigned char *reply_ptr = NULL;
+static unsigned char *reply_ptr;
static int data_index;
static int reading_reply;
static int reply_len;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 96bea4b62c4..b6073bdb50c 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -141,13 +141,13 @@ static volatile int adb_int_pending;
static volatile int disable_poll;
static struct device_node *vias;
static int pmu_kind = PMU_UNKNOWN;
-static int pmu_fully_inited = 0;
+static int pmu_fully_inited;
static int pmu_has_adb;
static struct device_node *gpio_node;
-static unsigned char __iomem *gpio_reg = NULL;
+static unsigned char __iomem *gpio_reg;
static int gpio_irq = NO_IRQ;
static int gpio_irq_enabled = -1;
-static volatile int pmu_suspended = 0;
+static volatile int pmu_suspended;
static spinlock_t pmu_lock;
static u8 pmu_intr_mask;
static int pmu_version;
@@ -169,7 +169,7 @@ static int option_server_mode;
int pmu_battery_count;
int pmu_cur_battery;
-unsigned int pmu_power_flags;
+unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT;
struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
static int query_batt_timer = BATTERY_POLLING_COUNT;
static struct adb_request batt_req;
@@ -180,7 +180,7 @@ int asleep;
BLOCKING_NOTIFIER_HEAD(sleep_notifier_list);
#ifdef CONFIG_ADB
-static int adb_dev_map = 0;
+static int adb_dev_map;
static int pmu_adb_flags;
static int pmu_probe(void);
@@ -2776,7 +2776,7 @@ pmu_polled_request(struct adb_request *req)
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
-static int pmu_sys_suspended = 0;
+static int pmu_sys_suspended;
static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
{
@@ -2816,7 +2816,6 @@ static struct sysdev_class pmu_sysclass = {
};
static struct sys_device device_pmu = {
- .id = 0,
.cls = &pmu_sysclass,
};
diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c
index 4f5b6fa196c..54baee57d2f 100644
--- a/drivers/macintosh/via-pmu68k.c
+++ b/drivers/macintosh/via-pmu68k.c
@@ -96,10 +96,10 @@ static int data_index;
static int data_len;
static int adb_int_pending;
static int pmu_adb_flags;
-static int adb_dev_map = 0;
+static int adb_dev_map;
static struct adb_request bright_req_1, bright_req_2, bright_req_3;
static int pmu_kind = PMU_UNKNOWN;
-static int pmu_fully_inited = 0;
+static int pmu_fully_inited;
int asleep;
BLOCKING_NOTIFIER_HEAD(sleep_notifier_list);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5cc6b91f840..d0edbaacb1f 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -999,4 +999,14 @@ config SERIAL_NETX_CONSOLE
If you have enabled the serial port on the Motorola IMX
CPU you can make it the console by answering Y to this option.
+config SERIAL_OF_PLATFORM
+ tristate "Serial port on Open Firmware platform bus"
+ depends on PPC_OF
+ depends on SERIAL_8250
+ help
+ If you have a PowerPC based system that has serial ports
+ on a platform specific bus, you should enable this option.
+ Currently, only 8250 compatible ports are supported, but
+ others can easily be added.
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index df3632cd7df..f3f82587b5f 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -58,3 +58,4 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
+obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3c4b6c24371..955bbd653e2 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -127,8 +127,7 @@ static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id);
#if defined(CONFIG_PPC_MERGE)
static struct of_device_id mpc52xx_uart_of_match[] = {
- { .type = "serial", .compatible = "mpc52xx-psc-uart", },
- { .type = "serial", .compatible = "mpc5200-psc", }, /* Efika only! */
+ { .type = "serial", .compatible = "mpc5200-psc-uart", },
{},
};
#endif
@@ -1068,7 +1067,7 @@ mpc52xx_uart_of_enumerate(void)
continue;
/* Is a particular device number requested? */
- devno = get_property(np, "device_no", NULL);
+ devno = get_property(np, "port-number", NULL);
mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1);
}
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
new file mode 100644
index 00000000000..09b0b736a75
--- /dev/null
+++ b/drivers/serial/of_serial.c
@@ -0,0 +1,143 @@
+/*
+ * Serial Port driver for Open Firmware platform devices
+ *
+ * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/of_platform.h>
+#include <asm/prom.h>
+
+/*
+ * Fill a struct uart_port for a given device node
+ */
+static int __devinit of_platform_serial_setup(struct of_device *ofdev,
+ int type, struct uart_port *port)
+{
+ struct resource resource;
+ struct device_node *np = ofdev->node;
+ const unsigned int *clk, *spd;
+ int ret;
+
+ memset(port, 0, sizeof *port);
+ spd = get_property(np, "current-speed", NULL);
+ clk = get_property(np, "clock-frequency", NULL);
+ if (!clk) {
+ dev_warn(&ofdev->dev, "no clock-frequency property set\n");
+ return -ENODEV;
+ }
+
+ ret = of_address_to_resource(np, 0, &resource);
+ if (ret) {
+ dev_warn(&ofdev->dev, "invalid address\n");
+ return ret;
+ }
+
+ spin_lock_init(&port->lock);
+ port->mapbase = resource.start;
+ port->irq = irq_of_parse_and_map(np, 0);
+ port->iotype = UPIO_MEM;
+ port->type = type;
+ port->uartclk = *clk;
+ port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+ port->dev = &ofdev->dev;
+ port->custom_divisor = *clk / (16 * (*spd));
+
+ return 0;
+}
+
+/*
+ * Try to register a serial port
+ */
+static int __devinit of_platform_serial_probe(struct of_device *ofdev,
+ const struct of_device_id *id)
+{
+ struct uart_port port;
+ int port_type;
+ int ret;
+
+ if (of_find_property(ofdev->node, "used-by-rtas", NULL))
+ return -EBUSY;
+
+ port_type = (unsigned long)id->data;
+ ret = of_platform_serial_setup(ofdev, port_type, &port);
+ if (ret)
+ goto out;
+
+ switch (port_type) {
+ case PORT_UNKNOWN:
+ dev_info(&ofdev->dev, "Unknown serial port found, "
+ "attempting to use 8250 driver\n");
+ /* fallthrough */
+ case PORT_8250 ... PORT_MAX_8250:
+ ret = serial8250_register_port(&port);
+ break;
+ default:
+ /* need to add code for these */
+ ret = -ENODEV;
+ break;
+ }
+ if (ret < 0)
+ goto out;
+
+ ofdev->dev.driver_data = (void *)(unsigned long)ret;
+ return 0;
+out:
+ irq_dispose_mapping(port.irq);
+ return ret;
+}
+
+/*
+ * Release a line
+ */
+static int of_platform_serial_remove(struct of_device *ofdev)
+{
+ int line = (unsigned long)ofdev->dev.driver_data;
+ serial8250_unregister_port(line);
+ return 0;
+}
+
+/*
+ * A few common types, add more as needed.
+ */
+static struct of_device_id __devinitdata of_platform_serial_table[] = {
+ { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, },
+ { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, },
+ { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, },
+ { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, },
+ { .type = "serial", .data = (void *)PORT_UNKNOWN, },
+ { /* end of list */ },
+};
+
+static struct of_platform_driver __devinitdata of_platform_serial_driver = {
+ .owner = THIS_MODULE,
+ .name = "of_serial",
+ .probe = of_platform_serial_probe,
+ .remove = of_platform_serial_remove,
+ .match_table = of_platform_serial_table,
+};
+
+static int __init of_platform_serial_init(void)
+{
+ return of_register_platform_driver(&of_platform_serial_driver);
+}
+module_init(of_platform_serial_init);
+
+static void __exit of_platform_serial_exit(void)
+{
+ return of_unregister_platform_driver(&of_platform_serial_driver);
+};
+module_exit(of_platform_serial_exit);
+
+MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices");
diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h
index e8c2ebd3ddd..35b95773746 100644
--- a/include/asm-powerpc/cell-pmu.h
+++ b/include/asm-powerpc/cell-pmu.h
@@ -53,6 +53,11 @@
#define CBE_PM_CTR_POLARITY 0x01000000
#define CBE_PM_CTR_COUNT_CYCLES 0x00800000
#define CBE_PM_CTR_ENABLE 0x00400000
+#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26)
+#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25)
+#define PM07_CTR_POLARITY(x) (((x) & 1) << 24)
+#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23)
+#define PM07_CTR_ENABLE(x) (((x) & 1) << 22)
/* Macros for the pm_status register. */
#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7)))
@@ -89,8 +94,7 @@ extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
extern void cbe_disable_pm_interrupts(u32 cpu);
-extern u32 cbe_query_pm_interrupts(u32 cpu);
-extern u32 cbe_clear_pm_interrupts(u32 cpu);
+extern u32 cbe_get_and_clear_pm_interrupts(u32 cpu);
extern void cbe_sync_irq(int node);
/* Utility functions, macros */
@@ -103,11 +107,4 @@ extern u32 cbe_get_hw_thread_id(int cpu);
#define CBE_COUNT_PROBLEM_MODE 2
#define CBE_COUNT_ALL_MODES 3
-/* Macros for the pm07_control registers. */
-#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26)
-#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25)
-#define PM07_CTR_POLARITY(x) (((x) & 1) << 24)
-#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23)
-#define PM07_CTR_ENABLE(x) (((x) & 1) << 22)
-
#endif /* __ASM_CELL_PMU_H__ */
diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h
index fd242a22331..a0f14eea1da 100644
--- a/include/asm-powerpc/floppy.h
+++ b/include/asm-powerpc/floppy.h
@@ -17,28 +17,115 @@
#define fd_outb(value,port) outb_p(value,port)
#define fd_enable_dma() enable_dma(FLOPPY_DMA)
-#define fd_disable_dma() disable_dma(FLOPPY_DMA)
-#define fd_request_dma() request_dma(FLOPPY_DMA, "floppy")
-#define fd_free_dma() free_dma(FLOPPY_DMA)
+#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA)
+#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA)
#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA)
#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode)
#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
+#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA)
#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
-#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt, \
- IRQF_DISABLED, "floppy", NULL)
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
-#ifdef CONFIG_PCI
-
#include <linux/pci.h>
#include <asm/ppc-pci.h> /* for ppc64_isabridge_dev */
-#define fd_dma_setup(addr,size,mode,io) powerpc_fd_dma_setup(addr,size,mode,io)
+#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io)
+
+static int fd_request_dma(void);
+
+struct fd_dma_ops {
+ void (*_disable_dma)(unsigned int dmanr);
+ void (*_free_dma)(unsigned int dmanr);
+ int (*_get_dma_residue)(unsigned int dummy);
+ int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+};
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_vdma;
+static struct fd_dma_ops *fd_ops;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+ unsigned char st;
+ int lcount;
+ char *lptr;
+
+ if (!doing_vdma)
+ return floppy_interrupt(irq, dev_id);
+
+
+ st = 1;
+ for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
+ lcount; lcount--, lptr++) {
+ st=inb(virtual_dma_port+4) & 0xa0 ;
+ if (st != 0xa0)
+ break;
+ if (virtual_dma_mode)
+ outb_p(*lptr, virtual_dma_port+5);
+ else
+ *lptr = inb_p(virtual_dma_port+5);
+ }
+ virtual_dma_count = lcount;
+ virtual_dma_addr = lptr;
+ st = inb(virtual_dma_port+4);
+
+ if (st == 0x20)
+ return IRQ_HANDLED;
+ if (!(st & 0x20)) {
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+ doing_vdma = 0;
+ floppy_interrupt(irq, dev_id);
+ return IRQ_HANDLED;
+ }
+ return IRQ_HANDLED;
+}
-static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size,
- int mode, int io)
+static void vdma_disable_dma(unsigned int dummy)
+{
+ doing_vdma = 0;
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+ return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+ if (can_use_virtual_dma)
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
+ else
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
+}
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+ doing_vdma = 1;
+ virtual_dma_port = io;
+ virtual_dma_mode = (mode == DMA_MODE_WRITE);
+ virtual_dma_addr = addr;
+ virtual_dma_count = size;
+ virtual_dma_residue = 0;
+ return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
{
static unsigned long prev_size;
static dma_addr_t bus_addr = 0;
@@ -46,6 +133,7 @@ static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size,
static int prev_dir;
int dir;
+ doing_vdma = 0;
dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
if (bus_addr
@@ -74,11 +162,32 @@ static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size,
return 0;
}
-#endif /* CONFIG_PCI */
+static struct fd_dma_ops real_dma_ops =
+{
+ ._disable_dma = disable_dma,
+ ._free_dma = free_dma,
+ ._get_dma_residue = get_dma_residue,
+ ._dma_setup = hard_dma_setup
+};
+
+static struct fd_dma_ops virt_dma_ops =
+{
+ ._disable_dma = vdma_disable_dma,
+ ._free_dma = vdma_nop,
+ ._get_dma_residue = vdma_get_dma_residue,
+ ._dma_setup = vdma_dma_setup
+};
-__inline__ void virtual_dma_init(void)
+static int fd_request_dma()
{
- /* Nothing to do on PowerPC */
+ if (can_use_virtual_dma & 1) {
+ fd_ops = &virt_dma_ops;
+ return 0;
+ }
+ else {
+ fd_ops = &real_dma_ops;
+ return request_dma(FLOPPY_DMA, "floppy");
+ }
}
static int FDC1 = 0x3f0;
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index b634e16575f..0f9f2dd24a7 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -129,7 +129,6 @@ struct spu {
struct spu_runqueue *rq;
unsigned long long timestamp;
pid_t pid;
- int prio;
int class_0_pending;
spinlock_t register_lock;
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
index 97b43548417..418e5c7e972 100644
--- a/include/asm-powerpc/systbl.h
+++ b/include/asm-powerpc/systbl.h
@@ -305,3 +305,4 @@ SYSCALL_SPU(faccessat)
COMPAT_SYS_SPU(get_robust_list)
COMPAT_SYS_SPU(set_robust_list)
COMPAT_SYS(move_pages)
+SYSCALL_SPU(getcpu)
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
index ca93bc99237..1babad99c71 100644
--- a/include/asm-powerpc/ucc_slow.h
+++ b/include/asm-powerpc/ucc_slow.h
@@ -150,7 +150,7 @@ struct ucc_slow_info {
int ucc_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
- struct ucc_slow *us_regs;
+ struct ucc_slow *regs;
int irq;
u16 uccm_mask;
int data_mem_part;
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
index 4cbc313aa02..d03d8557f70 100644
--- a/include/asm-powerpc/udbg.h
+++ b/include/asm-powerpc/udbg.h
@@ -46,6 +46,7 @@ extern void __init udbg_init_iseries(void);
extern void __init udbg_init_rtas_panel(void);
extern void __init udbg_init_rtas_console(void);
extern void __init udbg_init_debug_beat(void);
+extern void __init udbg_init_btext(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h
index b9f9118b160..26fc449bd98 100644
--- a/include/asm-powerpc/vdso.h
+++ b/include/asm-powerpc/vdso.h
@@ -18,16 +18,11 @@
#ifndef __ASSEMBLY__
-extern unsigned int vdso64_pages;
-extern unsigned int vdso32_pages;
-
/* Offsets relative to thread->vdso_base */
extern unsigned long vdso64_rt_sigtramp;
extern unsigned long vdso32_sigtramp;
extern unsigned long vdso32_rt_sigtramp;
-extern void vdso_init(void);
-
#else /* __ASSEMBLY__ */
#ifdef __VDSO64__
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
index 7a64ede53bb..92fd02d7b17 100644
--- a/include/asm-ppc/ibm4xx.h
+++ b/include/asm-ppc/ibm4xx.h
@@ -109,6 +109,10 @@ void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
#include <platforms/4xx/ocotea.h>
#endif
+#if defined(CONFIG_TAISHAN)
+#include <platforms/4xx/taishan.h>
+#endif
+
#ifndef __ASSEMBLY__
#ifdef CONFIG_40x
/*