diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-10-29 09:22:08 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-10-29 09:22:08 -0700 |
commit | 49b2de8e6febfea5a8791b6476195903af83a35d (patch) | |
tree | c93f328623b9429615981d4b7502997fdd0f72b0 | |
parent | 8633322c5fd5b2a986b279f88a7559d8409f7da3 (diff) | |
parent | b5dd884e682cae6b8c037f9d11f3b623b4cf2011 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
net: Fix 'Re: PACKET_TX_RING: packet size is too long'
netdev: usb: dm9601.c can drive a device not supported yet, add support for it
qlge: Fix firmware mailbox command timeout.
qlge: Fix EEH handling.
AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2)
bonding: fix a race condition in calls to slave MII ioctls
virtio-net: fix data corruption with OOM
sfc: Set ip_summed correctly for page buffers passed to GRO
cnic: Fix L2CTX_STATUSB_NUM offset in context memory.
MAINTAINERS: rt2x00 list is moderated
airo: Reorder tests, check bounds before element
mac80211: fix for incorrect sequence number on hostapd injected frames
libertas spi: fix sparse errors
mac80211: trivial: fix spelling in mesh_hwmp
cfg80211: sme: deauthenticate on assoc failure
mac80211: keep auth state when assoc fails
mac80211: fix ibss joining
b43: add 'struct b43_wl' missing declaration
b43: Fix Bugzilla #14181 and the bug from the previous 'fix'
rt2x00: Fix crypto in TX frame for rt2800usb
...
45 files changed, 795 insertions, 391 deletions
diff --git a/drivers/isdn/i4l/isdn_net.h b/drivers/isdn/i4l/isdn_net.h index 74032d0881e..7511f08effa 100644 --- a/drivers/isdn/i4l/isdn_net.h +++ b/drivers/isdn/i4l/isdn_net.h @@ -83,19 +83,19 @@ static __inline__ isdn_net_local * isdn_net_get_locked_lp(isdn_net_dev *nd) spin_lock_irqsave(&nd->queue_lock, flags); lp = nd->queue; /* get lp on top of queue */ - spin_lock(&nd->queue->xmit_lock); while (isdn_net_lp_busy(nd->queue)) { - spin_unlock(&nd->queue->xmit_lock); nd->queue = nd->queue->next; if (nd->queue == lp) { /* not found -- should never happen */ lp = NULL; goto errout; } - spin_lock(&nd->queue->xmit_lock); } lp = nd->queue; nd->queue = nd->queue->next; + spin_unlock_irqrestore(&nd->queue_lock, flags); + spin_lock(&lp->xmit_lock); local_bh_disable(); + return lp; errout: spin_unlock_irqrestore(&nd->queue_lock, flags); return lp; diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 04f63c77071..ce6f1ac25df 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -34,6 +34,7 @@ * * */ +#include <linux/capability.h> #include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/kernel.h> diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 6c7f795d12d..a4d83409f20 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -361,9 +361,12 @@ struct l2_fhdr { #define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28) #define BNX2_L2CTX_HOST_BDIDX 0x00000004 -#define BNX2_L2CTX_STATUSB_NUM_SHIFT 16 -#define BNX2_L2CTX_STATUSB_NUM(sb_id) \ - (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0) +#define BNX2_L2CTX_L5_STATUSB_NUM_SHIFT 16 +#define BNX2_L2CTX_L2_STATUSB_NUM_SHIFT 24 +#define BNX2_L2CTX_L5_STATUSB_NUM(sb_id) \ + (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L5_STATUSB_NUM_SHIFT) : 0) +#define BNX2_L2CTX_L2_STATUSB_NUM(sb_id) \ + (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT) : 0) #define BNX2_L2CTX_HOST_BSEQ 0x00000008 #define BNX2_L2CTX_NX_BSEQ 0x0000000c #define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010 diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 69c5b15e22d..40fb5eefc72 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -691,7 +691,7 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_dev, int reporting) { const struct net_device_ops *slave_ops = slave_dev->netdev_ops; - static int (*ioctl)(struct net_device *, struct ifreq *, int); + int (*ioctl)(struct net_device *, struct ifreq *, int); struct ifreq ifr; struct mii_ioctl_data *mii; @@ -3665,10 +3665,10 @@ static int bond_xmit_hash_policy_l23(struct sk_buff *skb, if (skb->protocol == htons(ETH_P_IP)) { return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^ - (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count; + (data->h_dest[5] ^ data->h_source[5])) % count; } - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /* @@ -3695,7 +3695,7 @@ static int bond_xmit_hash_policy_l34(struct sk_buff *skb, } - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /* @@ -3706,7 +3706,7 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, { struct ethhdr *data = (struct ethhdr *)skb->data; - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /*-------------------------- Device entry points ----------------------------*/ diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 46c87ec7960..3bf1b04f2ca 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -2264,9 +2264,9 @@ static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev) cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val); if (sb_id == 0) - val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT; + val = 2 << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT; else - val = BNX2_L2CTX_STATUSB_NUM(sb_id); + val = BNX2_L2CTX_L2_STATUSB_NUM(sb_id); cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val); rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE); @@ -2423,7 +2423,7 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev) cp->int_num = 0; if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) { u32 sb_id = cp->status_blk_num; - u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id); + u32 sb = BNX2_L2CTX_L5_STATUSB_NUM(sb_id); cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT; cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb); diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h index 80817c2edfb..fb1c924d79b 100644 --- a/drivers/net/dm9000.h +++ b/drivers/net/dm9000.h @@ -50,7 +50,7 @@ #define DM9000_RCSR 0x32 #define CHIPR_DM9000A 0x19 -#define CHIPR_DM9000B 0x1B +#define CHIPR_DM9000B 0x1A #define DM9000_MRCMDX 0xF0 #define DM9000_MRCMD 0xF2 diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 981936c1fb4..405a144ebca 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -519,9 +519,13 @@ extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw); extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active); extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw); extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); extern s32 e1000e_get_cfg_done(struct e1000_hw *hw); @@ -538,7 +542,11 @@ extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u32 usec_interval, bool *success); extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); @@ -546,7 +554,11 @@ extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_check_downshift(struct e1000_hw *hw); extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow); extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index fd44d9f9076..7b05cf47f7f 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -764,11 +764,13 @@ struct e1000_phy_operations { s32 (*get_cable_length)(struct e1000_hw *); s32 (*get_phy_info)(struct e1000_hw *); s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *); void (*release_phy)(struct e1000_hw *); s32 (*reset_phy)(struct e1000_hw *); s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_phy_reg)(struct e1000_hw *, u32, u16); + s32 (*write_phy_reg_locked)(struct e1000_hw *, u32, u16); s32 (*cfg_on_link_up)(struct e1000_hw *); }; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 99df2abf82a..b6388b9535f 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -122,6 +122,13 @@ #define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ +#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ + +/* OEM Bits Phy Register */ +#define HV_OEM_BITS PHY_REG(768, 25) +#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -200,6 +207,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw); static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); +static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -242,7 +250,11 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; phy->ops.read_phy_reg = e1000_read_phy_reg_hv; + phy->ops.read_phy_reg_locked = e1000_read_phy_reg_hv_locked; + phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.write_phy_reg = e1000_write_phy_reg_hv; + phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -303,6 +315,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) case IGP03E1000_E_PHY_ID: phy->type = e1000_phy_igp_3; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked; + phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked; break; case IFE_E_PHY_ID: case IFE_PLUS_E_PHY_ID: @@ -568,12 +582,39 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) static DEFINE_MUTEX(nvm_mutex); /** + * e1000_acquire_nvm_ich8lan - Acquire NVM mutex + * @hw: pointer to the HW structure + * + * Acquires the mutex for performing NVM operations. + **/ +static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) +{ + mutex_lock(&nvm_mutex); + + return 0; +} + +/** + * e1000_release_nvm_ich8lan - Release NVM mutex + * @hw: pointer to the HW structure + * + * Releases the mutex used while performing NVM operations. + **/ +static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) +{ + mutex_unlock(&nvm_mutex); + + return; +} + +static DEFINE_MUTEX(swflag_mutex); + +/** * e1000_acquire_swflag_ich8lan - Acquire software control flag * @hw: pointer to the HW structure * - * Acquires the software control flag for performing NVM and PHY - * operations. This is a function pointer entry point only called by - * read/write routines for the PHY and NVM parts. + * Acquires the software control flag for performing PHY and select + * MAC CSR accesses. **/ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) { @@ -582,7 +623,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) might_sleep(); - mutex_lock(&nvm_mutex); + mutex_lock(&swflag_mutex); while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); @@ -599,7 +640,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) goto out; } - timeout = PHY_CFG_TIMEOUT * 2; + timeout = SW_FLAG_TIMEOUT; extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); @@ -623,7 +664,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) out: if (ret_val) - mutex_unlock(&nvm_mutex); + mutex_unlock(&swflag_mutex); return ret_val; } @@ -632,9 +673,8 @@ out: * e1000_release_swflag_ich8lan - Release software control flag * @hw: pointer to the HW structure * - * Releases the software control flag for performing NVM and PHY operations. - * This is a function pointer entry point only called by read/write - * routines for the PHY and NVM parts. + * Releases the software control flag for performing PHY and select + * MAC CSR accesses. **/ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) { @@ -644,7 +684,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); - mutex_unlock(&nvm_mutex); + mutex_unlock(&swflag_mutex); + + return; } /** @@ -844,7 +886,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) u32 i; u32 data, cnf_size, cnf_base_addr, sw_cfg_mask; s32 ret_val; - u16 word_addr, reg_data, reg_addr, phy_page = 0; + u16 reg, word_addr, reg_data, reg_addr, phy_page = 0; ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) @@ -859,6 +901,10 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Dummy read to clear the phy wakeup bit after lcd reset */ + if (hw->mac.type == e1000_pchlan) + e1e_rphy(hw, BM_WUC, ®); + /* * Initialize the PHY from the NVM on ICH platforms. This * is needed due to an issue where the NVM configuration is @@ -1054,6 +1100,38 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw) } /** + * e1000_set_lplu_state_pchlan - Set Low Power Link Up state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU state according to the active flag. For PCH, if OEM write + * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set + * the phy speed. This function will manually set the LPLU bit and restart + * auto-neg as hw would do. D3 and D0 LPLU will call the same function + * since it configures the same bit. + **/ +static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) +{ + s32 ret_val = 0; + u16 oem_reg; + + ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); + if (ret_val) + goto out; + + if (active) + oem_reg |= HV_OEM_BITS_LPLU; + else + oem_reg &= ~HV_OEM_BITS_LPLU; + + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg); + +out: + return ret_val; +} + +/** * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state * @hw: pointer to the HW structure * @active: TRUE to enable LPLU, FALSE to disable @@ -1314,12 +1392,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { hw_dbg(hw, "nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; + ret_val = -E1000_ERR_NVM; + goto out; } - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - goto out; + nvm->ops.acquire_nvm(hw); ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { @@ -1345,7 +1422,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, } } - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); out: if (ret_val) @@ -1603,11 +1680,15 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_NVM; } + nvm->ops.acquire_nvm(hw); + for (i = 0; i < words; i++) { dev_spec->shadow_ram[offset+i].modified = 1; dev_spec->shadow_ram[offset+i].value = data[i]; } + nvm->ops.release_nvm(hw); + return 0; } @@ -1637,9 +1718,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_sw) goto out; - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - goto out; + nvm->ops.acquire_nvm(hw); /* * We're writing to the opposite bank so if we're on bank 1, @@ -1657,7 +1736,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) old_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } } else { @@ -1665,7 +1744,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) new_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } } @@ -1723,7 +1802,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) { /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ hw_dbg(hw, "Flash commit failed.\n"); - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1736,7 +1815,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } data &= 0xBFFF; @@ -1744,7 +1823,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset * 2 + 1, (u8)(data >> 8)); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1757,7 +1836,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1767,7 +1846,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) dev_spec->shadow_ram[i].value = 0xFFFF; } - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); /* * Reload the EEPROM, or else modifications will not appear @@ -1831,14 +1910,12 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) **/ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) { + struct e1000_nvm_info *nvm = &hw->nvm; union ich8_flash_protected_range pr0; union ich8_hws_flash_status hsfsts; u32 gfpreg; - s32 ret_val; - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - return; + nvm->ops.acquire_nvm(hw); gfpreg = er32flash(ICH_FLASH_GFPREG); @@ -1859,7 +1936,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flockdn = true; ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); } /** @@ -2229,6 +2306,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) { + u16 reg; u32 ctrl, icr, kab; s32 ret_val; @@ -2304,6 +2382,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) hw_dbg(hw, "Auto Read Done did not complete\n"); } } + /* Dummy read to clear the phy wakeup bit after lcd reset */ + if (hw->mac.type == e1000_pchlan) + e1e_rphy(hw, BM_WUC, ®); /* * For PCH, this write will make sure that any noise @@ -2843,9 +2924,8 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); - /* Workaround SWFLAG unexpectedly set during S0->Sx */ if (hw->mac.type == e1000_pchlan) - udelay(500); + e1000_phy_hw_reset_ich8lan(hw); default: break; } @@ -3113,9 +3193,9 @@ static struct e1000_phy_operations ich8_phy_ops = { }; static struct e1000_nvm_operations ich8_nvm_ops = { - .acquire_nvm = e1000_acquire_swflag_ich8lan, + .acquire_nvm = e1000_acquire_nvm_ich8lan, .read_nvm = e1000_read_nvm_ich8lan, - .release_nvm = e1000_release_swflag_ich8lan, + .release_nvm = e1000_release_nvm_ich8lan, .update_nvm = e1000_update_nvm_checksum_ich8lan, .valid_led_default = e1000_valid_led_default_ich8lan, .validate_nvm = e1000_validate_nvm_checksum_ich8lan, diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 994401fd066..f9d33ab05e9 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -164,16 +164,25 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) * MDIC mode. No harm in trying again in this case since * the PHY ID is unknown at this point anyway */ + ret_val = phy->ops.acquire_phy(hw); + if (ret_val) + goto out; ret_val = e1000_set_mdio_slow_mode_hv(hw, true); if (ret_val) goto out; + phy->ops.release_phy(hw); retry_count++; } out: /* Revert to MDIO fast mode, if applicable */ - if (retry_count) + if (retry_count) { + ret_val = phy->ops.acquire_phy(hw); + if (ret_val) + return ret_val; ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + phy->ops.release_phy(hw); + } return ret_val; } @@ -354,94 +363,173 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) } /** - * e1000e_read_phy_reg_igp - Read igp PHY register + * __e1000e_read_phy_reg_igp - Read igp PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired + * and stores the retrieved information in data. Release any acquired * semaphores before exiting. **/ -s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (u16)offset); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto release; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); - - hw->phy.ops.release_phy(hw); + data); +release: + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** + * e1000e_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores the + * retrieved information in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000e_read_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000e_read_phy_reg_igp_locked - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000e_read_phy_reg_igp(hw, offset, data, true); +} + +/** * e1000e_write_phy_reg_igp - Write igp PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (u16)offset); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto release; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); +release: + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** - * e1000e_read_kmrn_reg - Read kumeran register + * e1000e_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000e_write_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000e_write_phy_reg_igp_locked - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. + * Assumes semaphore already acquired. + **/ +s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000e_write_phy_reg_igp(hw, offset, data, true); +} + +/** + * __e1000_read_kmrn_reg - Read kumeran register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary. Then reads the PHY register at offset * using the kumeran interface. The information retrieved is stored in data. * Release any acquired semaphores before exiting. **/ -s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { u32 kmrnctrlsta; - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; @@ -452,41 +540,111 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) kmrnctrlsta = er32(KMRNCTRLSTA); *data = (u16)kmrnctrlsta; - hw->phy.ops.release_phy(hw); + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** - * e1000e_write_kmrn_reg - Write kumeran register + * e1000e_read_kmrn_reg - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset using the + * kumeran interface. The information retrieved is stored in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_read_kmrn_reg_locked - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the kumeran interface. The + * information retrieved is stored in data. + * Assumes semaphore already acquired. + **/ +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, true); +} + +/** + * __e1000_write_kmrn_reg - Write kumeran register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary. Then write the data to PHY register * at the offset using the kumeran interface. Release any acquired semaphores * before exiting. **/ -s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { u32 kmrnctrlsta; - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | data; ew32(KMRNCTRLSTA, kmrnctrlsta); udelay(2); - hw->phy.ops.release_phy(hw); + if (!locked) + hw->phy.ops.release_phy(hw); + +out: return ret_val; } /** + * e1000e_write_kmrn_reg - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to the PHY register at the offset + * using the kumeran interface. Release the acquired semaphore before exiting. + **/ +s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_write_kmrn_reg_locked - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Write the data to PHY register at the offset using the kumeran interface. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, true); +} + +/** * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link * @hw: pointer to the HW structure * @@ -2105,6 +2263,10 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, @@ -2112,10 +2274,6 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2135,18 +2293,15 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, (page << page_shift)); - if (ret_val) { - hw->phy.ops.release_phy(hw); + if (ret_val) goto out; - } } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); - out: + hw->phy.ops.release_phy(hw); return ret_val; } @@ -2167,6 +2322,10 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, @@ -2174,10 +2333,6 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2197,17 +2352,14 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, (page << page_shift)); - if (ret_val) { - hw->phy.ops.release_phy(hw); + if (ret_val) goto out; - } } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); - out: + hw->phy.ops.release_phy(hw); return ret_val; } @@ -2226,17 +2378,17 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, true); - return ret_val; + goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2245,16 +2397,14 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); +out: hw->phy.ops.release_phy(hw); - return ret_val; } @@ -2272,17 +2422,17 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, false); - return ret_val; + goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2290,17 +2440,15 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); +out: hw->phy.ops.release_phy(hw); - return ret_val; } @@ -2320,6 +2468,8 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) * 3) Write the address using the address opcode (0x11) * 4) Read or write the data using the data opcode (0x12) * 5) Restore 769_17.2 to its original value + * + * Assumes semaphore already acquired. **/ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read) @@ -2327,20 +2477,12 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, s32 ret_val; u16 reg = BM_PHY_REG_NUM(offset); u16 phy_reg = 0; - u8 phy_acquired = 1; - /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) hw_dbg(hw, "Attempting to access page 800 while gig enabled\n"); - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) { - phy_acquired = 0; - goto out; - } - /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2397,8 +2539,6 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); out: - if (phy_acquired == 1) - hw->phy.ops.release_phy(hw); return ret_val; } @@ -2439,52 +2579,63 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) return 0; } +/** + * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode + * @hw: pointer to the HW structure + * @slow: true for slow mode, false for normal mode + * + * Assumes semaphore already acquired. + **/ s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow) { s32 ret_val = 0; u16 data = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */ hw->phy.addr = 1; ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; + ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1, (0x2180 | (slow << 10))); + if (ret_val) + goto out; /* dummy read when reverting to fast mode - throw away result */ if (!slow) - e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); - - hw->phy.ops.release_phy(hw); + ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); +out: return ret_val; } /** - * e1000_read_phy_reg_hv - Read HV PHY register + * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired + * and stores the retrieved information in data. Release any acquired * semaphore before exiting. **/ -s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); bool in_slow_mode = false; + if (!locked) { + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + } + /* Workaround failure in MDIO access while cable is disconnected */ if ((hw->phy.type == e1000_phy_82577) && !(er32(STATUS) & E1000_STATUS_LU)) { @@ -2508,10 +2659,6 @@ s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); if (page == HV_INTC_FC_PAGE_START) @@ -2529,42 +2676,76 @@ s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (page << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - goto out; - } hw->phy.addr = phy_addr; } } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); - hw->phy.ops.release_phy(hw); - out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + if (!locked) + hw->phy.ops.release_phy(hw); + return ret_val; } /** - * e1000_write_phy_reg_hv - Write HV PHY register + * e1000_read_phy_reg_hv - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores + * the retrieved information in data. Release the acquired semaphore + * before exiting. + **/ +s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, false); +} + +/** + * e1000_read_phy_reg_hv_locked - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, true); +} + +/** + * __e1000_write_phy_reg_hv - Write HV PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); bool in_slow_mode = false; + if (!locked) { + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + } + /* Workaround failure in MDIO access while cable is disconnected */ if ((hw->phy.type == e1000_phy_82577) && !(er32(STATUS) & E1000_STATUS_LU)) { @@ -2588,10 +2769,6 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); if (page == HV_INTC_FC_PAGE_START) @@ -2607,15 +2784,10 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) { u16 data2 = 0x7EFF; - hw->phy.ops.release_phy(hw); ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3, &data2, false); if (ret_val) goto out; - - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; } if (reg > MAX_PHY_MULTI_PAGE_REG) { @@ -2630,27 +2802,53 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (page << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - goto out; - } hw->phy.addr = phy_addr; } } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); - hw->phy.ops.release_phy(hw); out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + if (!locked) + hw->phy.ops.release_phy(hw); + return ret_val; } /** + * e1000_write_phy_reg_hv - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register at the offset. + * Release the acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, false); +} + +/** + * e1000_write_phy_reg_hv_locked - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. Assumes semaphore + * already acquired. + **/ +s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, true); +} + +/** * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page * @page: page to be accessed **/ @@ -2671,10 +2869,9 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page) * @data: pointer to the data to be read or written * @read: determines if operation is read or written * - * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retreived information in data. Release any acquired - * semaphores before exiting. Note that the procedure to read these regs - * uses the address port and data port to read/write. + * Reads the PHY register at offset and stores the retreived information + * in data. Assumes semaphore already acquired. Note that the procedure + * to read these regs uses the address port and data port to read/write. **/ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool read) @@ -2682,20 +2879,12 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, s32 ret_val; u32 addr_reg = 0; u32 data_reg = 0; - u8 phy_acquired = 1; /* This takes care of the difference with desktop vs mobile phy */ addr_reg = (hw->phy.type == e1000_phy_82578) ? I82578_ADDR_REG : I82577_ADDR_REG; data_reg = addr_reg + 1; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) { - hw_dbg(hw, "Could not acquire PHY\n"); - phy_acquired = 0; - goto out; - } - /* All operations in this function are phy address 2 */ hw->phy.addr = 2; @@ -2718,8 +2907,6 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, } out: - if (phy_acquired == 1) - hw->phy.ops.release_phy(hw); return ret_val; } diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 801f088c134..030913f8bd2 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -98,12 +98,13 @@ static void ri_tasklet(unsigned long dev) stats->tx_packets++; stats->tx_bytes +=skb->len; - skb->dev = __dev_get_by_index(&init_net, skb->iif); + skb->dev = dev_get_by_index(&init_net, skb->iif); if (!skb->dev) { dev_kfree_skb(skb); stats->tx_dropped++; break; } + dev_put(skb->dev); skb->iif = _dev->ifindex; if (from & AT_EGRESS) { diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index deaea8fa103..b243ed3b0c3 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -732,7 +732,7 @@ static int igb_set_ringparam(struct net_device *netdev, { struct igb_adapter *adapter = netdev_priv(netdev); struct igb_ring *temp_ring; - int i, err; + int i, err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -752,18 +752,30 @@ static int igb_set_ringparam(struct net_device *netdev, return 0; } + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto clear_reset; + } + if (adapter->num_tx_queues > adapter->num_rx_queues) temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring)); else temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring)); - if (!temp_ring) - return -ENOMEM; - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - msleep(1); + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } - if (netif_running(adapter->netdev)) - igb_down(adapter); + igb_down(adapter); /* * We can't just free everything and then setup again, @@ -820,14 +832,11 @@ static int igb_set_ringparam(struct net_device *netdev, adapter->rx_ring_count = new_rx_count; } - - err = 0; err_setup: - if (netif_running(adapter->netdev)) - igb_up(adapter); - - clear_bit(__IGB_RESETTING, &adapter->state); + igb_up(adapter); vfree(temp_ring); +clear_reset: + clear_bit(__IGB_RESETTING, &adapter->state); return err; } diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c index ee17a097d1c..c68265bd0d1 100644 --- a/drivers/net/igbvf/ethtool.c +++ b/drivers/net/igbvf/ethtool.c @@ -279,7 +279,7 @@ static int igbvf_set_ringparam(struct net_device *netdev, { struct igbvf_adapter *adapter = netdev_priv(netdev); struct igbvf_ring *temp_ring; - int err; + int err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -299,15 +299,22 @@ static int igbvf_set_ringparam(struct net_device *netdev, return 0; } - temp_ring = vmalloc(sizeof(struct igbvf_ring)); - if (!temp_ring) - return -ENOMEM; - while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) msleep(1); - if (netif_running(adapter->netdev)) - igbvf_down(adapter); + if (!netif_running(adapter->netdev)) { + adapter->tx_ring->count = new_tx_count; + adapter->rx_ring->count = new_rx_count; + goto clear_reset; + } + + temp_ring = vmalloc(sizeof(struct igbvf_ring)); + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } + + igbvf_down(adapter); /* * We can't just free everything and then setup again, @@ -339,14 +346,11 @@ static int igbvf_set_ringparam(struct net_device *netdev, memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring)); } - - err = 0; err_setup: - if (netif_running(adapter->netdev)) - igbvf_up(adapter); - - clear_bit(__IGBVF_RESETTING, &adapter->state); + igbvf_up(adapter); vfree(temp_ring); +clear_reset: + clear_bit(__IGBVF_RESETTING, &adapter->state); return err; } diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index fa314cb005a..856c18c207f 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -798,7 +798,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_ring *temp_tx_ring, *temp_rx_ring; - int i, err; + int i, err = 0; u32 new_rx_count, new_tx_count; bool need_update = false; @@ -822,6 +822,16 @@ static int ixgbe_set_ringparam(struct net_device *netdev, while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) msleep(1); + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto err_setup; + } + temp_tx_ring = kcalloc(adapter->num_tx_queues, sizeof(struct ixgbe_ring), GFP_KERNEL); if (!temp_tx_ring) { @@ -879,8 +889,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, /* if rings need to be updated, here's the place to do it in one shot */ if (need_update) { - if (netif_running(netdev)) - ixgbe_down(adapter); + ixgbe_down(adapter); /* tx */ if (new_tx_count != adapter->tx_ring_count) { @@ -897,13 +906,8 @@ static int ixgbe_set_ringparam(struct net_device *netdev, temp_rx_ring = NULL; adapter->rx_ring_count = new_rx_count; } - } - - /* success! */ - err = 0; - if (netif_running(netdev)) ixgbe_up(adapter); - + } err_setup: clear_bit(__IXGBE_RESETTING, &adapter->state); return err; diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 6930c87f362..f3624517cb0 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.5.0-1.432" +#define MYRI10GE_VERSION_STR "1.5.1-1.451" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1624,10 +1624,21 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) return 0; } } - if (*ptr == 'R' || *ptr == 'Q') { - /* We've found either an XFP or quad ribbon fiber */ + if (*ptr == '2') + ptr++; + if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') { + /* We've found either an XFP, quad ribbon fiber, or SFP+ */ cmd->port = PORT_FIBRE; + cmd->supported |= SUPPORTED_FIBRE; + cmd->advertising |= ADVERTISED_FIBRE; + } else { + cmd->port = PORT_OTHER; } + if (*ptr == 'R' || *ptr == 'S') + cmd->transceiver = XCVR_EXTERNAL; + else + cmd->transceiver = XCVR_INTERNAL; + return 0; } diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 7a7177421d7..1c46da63212 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -419,6 +419,7 @@ enum { #define NETXEN_CRB_ROMUSB \ NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB) #define NETXEN_CRB_I2Q NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q) +#define NETXEN_CRB_I2C0 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2C0) #define NETXEN_CRB_SMB NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SMB) #define NETXEN_CRB_MAX NETXEN_PCI_CRB_WINDOW(64) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 32314000dfc..3185a98b091 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1901,22 +1901,16 @@ netxen_setup_hwops(struct netxen_adapter *adapter) int netxen_nic_get_board_info(struct netxen_adapter *adapter) { - int offset, board_type, magic, header_version; + int offset, board_type, magic; struct pci_dev *pdev = adapter->pdev; offset = NX_FW_MAGIC_OFFSET; if (netxen_rom_fast_read(adapter, offset, &magic)) return -EIO; - offset = NX_HDR_VERSION_OFFSET; - if (netxen_rom_fast_read(adapter, offset, &header_version)) - return -EIO; - - if (magic != NETXEN_BDINFO_MAGIC || - header_version != NETXEN_BDINFO_VERSION) { - dev_err(&pdev->dev, - "invalid board config, magic=%08x, version=%08x\n", - magic, header_version); + if (magic != NETXEN_BDINFO_MAGIC) { + dev_err(&pdev->dev, "invalid board config, magic=%08x\n", + magic); return -EIO; } diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 91c2bc61c8e..e40b914d6fa 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -531,6 +531,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + if (off == (NETXEN_CRB_I2C0 + 0x1c)) + continue; /* do not reset PCI */ if (off == (ROMUSB_GLB + 0xbc)) continue; @@ -553,12 +555,6 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; } - if (off == NETXEN_ADDR_ERROR) { - printk(KERN_ERR "%s: Err: Unknown addr: 0x%08x\n", - netxen_nic_driver_name, buf[i].addr); - continue; - } - init_delay = 1; /* After writing this register, HW needs time for CRB */ /* to quiet down (else crb_window returns 0xffffffff) */ diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7fc15e9e8ad..0b4a56a8c8d 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1919,6 +1919,7 @@ static void netxen_tx_timeout_task(struct work_struct *work) request_reset: adapter->need_fw_reset = 1; + clear_bit(__NX_RESETTING, &adapter->state); } struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 7cbf6f9b51d..2559991eea6 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -111,9 +111,6 @@ struct pppoe_net { rwlock_t hash_lock; }; -/* to eliminate a race btw pppoe_flush_dev and pppoe_release */ -static DEFINE_SPINLOCK(flush_lock); - /* * PPPoE could be in the following stages: * 1) Discovery stage (to obtain remote MAC and Session ID) @@ -303,45 +300,48 @@ static void pppoe_flush_dev(struct net_device *dev) write_lock_bh(&pn->hash_lock); for (i = 0; i < PPPOE_HASH_SIZE; i++) { struct pppox_sock *po = pn->hash_table[i]; + struct sock *sk; - while (po != NULL) { - struct sock *sk; - if (po->pppoe_dev != dev) { + while (po) { + while (po && po->pppoe_dev != dev) { po = po->next; - continue; } + + if (!po) + break; + sk = sk_pppox(po); - spin_lock(&flush_lock); - po->pppoe_dev = NULL; - spin_unlock(&flush_lock); - dev_put(dev); /* We always grab the socket lock, followed by the - * hash_lock, in that order. Since we should - * hold the sock lock while doing any unbinding, - * we need to release the lock we're holding. - * Hold a reference to the sock so it doesn't disappear - * as we're jumping between locks. + * hash_lock, in that order. Since we should hold the + * sock lock while doing any unbinding, we need to + * release the lock we're holding. Hold a reference to + * the sock so it doesn't disappear as we're jumping + * between locks. */ sock_hold(sk); - write_unlock_bh(&pn->hash_lock); lock_sock(sk); - if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + if (po->pppoe_dev == dev + && sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { pppox_unbind_sock(sk); sk->sk_state = PPPOX_ZOMBIE; sk->sk_state_change(sk); + po->pppoe_dev = NULL; + dev_put(dev); } release_sock(sk); sock_put(sk); - /* Restart scan at the beginning of this hash chain. - * While the lock was dropped the chain contents may - * have changed. + /* Restart the process from the start of the current + * hash chain. We dropped locks so the world may have + * change from underneath us. */ + + BUG_ON(pppoe_pernet(dev_net(dev)) == NULL); write_lock_bh(&pn->hash_lock); po = pn->hash_table[i]; } @@ -388,11 +388,16 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) struct pppox_sock *po = pppox_sk(sk); struct pppox_sock *relay_po; + /* Backlog receive. Semantics of backlog rcv preclude any code from + * executing in lock_sock()/release_sock() bounds; meaning sk->sk_state + * can't change. + */ + if (sk->sk_state & PPPOX_BOUND) { ppp_input(&po->chan, skb); } else if (sk->sk_state & PPPOX_RELAY) { - relay_po = get_item_by_addr(dev_net(po->pppoe_dev), - &po->pppoe_relay); + relay_po = get_item_by_addr(sock_net(sk), + &po->pppoe_relay); if (relay_po == NULL) goto abort_kfree; @@ -447,6 +452,10 @@ static int pppoe_rcv(struct sk_buff *skb, struct net_device *dev, goto drop; pn = pppoe_pernet(dev_net(dev)); + + /* Note that get_item does a sock_hold(), so sk_pppox(po) + * is known to be safe. + */ po = get_item(pn, ph->sid, eth_hdr(skb)->h_source, dev->ifindex); if (!po) goto drop; @@ -561,6 +570,7 @@ static int pppoe_release(struct socket *sock) struct sock *sk = sock->sk; struct pppox_sock *po; struct pppoe_net *pn; + struct net *net = NULL; if (!sk) return 0; @@ -571,44 +581,28 @@ static int pppoe_release(struct socket *sock) return -EBADF; } + po = pppox_sk(sk); + + if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; + } + pppox_unbind_sock(sk); /* Signal the death of the socket. */ sk->sk_state = PPPOX_DEAD; - /* - * pppoe_flush_dev could lead to a race with - * this routine so we use flush_lock to eliminate - * such a case (we only need per-net specific data) - */ - spin_lock(&flush_lock); - po = pppox_sk(sk); - if (!po->pppoe_dev) { - spin_unlock(&flush_lock); - goto out; - } - pn = pppoe_pernet(dev_net(po->pppoe_dev)); - spin_unlock(&flush_lock); + net = sock_net(sk); + pn = pppoe_pernet(net); /* * protect "po" from concurrent updates * on pppoe_flush_dev */ - write_lock_bh(&pn->hash_lock); + delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote, + po->pppoe_ifindex); - po = pppox_sk(sk); - if (stage_session(po->pppoe_pa.sid)) - __delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote, - po->pppoe_ifindex); - - if (po->pppoe_dev) { - dev_put(po->pppoe_dev); - po->pppoe_dev = NULL; - } - - write_unlock_bh(&pn->hash_lock); - -out: sock_orphan(sk); sock->sk = NULL; @@ -625,8 +619,9 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, struct sock *sk = sock->sk; struct sockaddr_pppox *sp = (struct sockaddr_pppox *)uservaddr; struct pppox_sock *po = pppox_sk(sk); - struct net_device *dev; + struct net_device *dev = NULL; struct pppoe_net *pn; + struct net *net = NULL; int error; lock_sock(sk); @@ -652,12 +647,14 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, /* Delete the old binding */ if (stage_session(po->pppoe_pa.sid)) { pppox_unbind_sock(sk); + pn = pppoe_pernet(sock_net(sk)); + delete_item(pn, po->pppoe_pa.sid, + po->pppoe_pa.remote, po->pppoe_ifindex); if (po->pppoe_dev) { - pn = pppoe_pernet(dev_net(po->pppoe_dev)); - delete_item(pn, po->pppoe_pa.sid, - po->pppoe_pa.remote, po->pppoe_ifindex); dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; } + memset(sk_pppox(po) + 1, 0, sizeof(struct pppox_sock) - sizeof(struct sock)); sk->sk_state = PPPOX_NONE; @@ -666,16 +663,15 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, /* Re-bind in session stage only */ if (stage_session(sp->sa_addr.pppoe.sid)) { error = -ENODEV; - dev = dev_get_by_name(sock_net(sk), sp->sa_addr.pppoe.dev); + net = sock_net(sk); + dev = dev_get_by_name(net, sp->sa_addr.pppoe.dev); if (!dev) - goto end; + goto err_put; po->pppoe_dev = dev; po->pppoe_ifindex = dev->ifindex; - pn = pppoe_pernet(dev_net(dev)); - write_lock_bh(&pn->hash_lock); + pn = pppoe_pernet(net); if (!(dev->flags & IFF_UP)) { - write_unlock_bh(&pn->hash_lock); goto err_put; } @@ -683,6 +679,7 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, &sp->sa_addr.pppoe, sizeof(struct pppoe_addr)); + write_lock_bh(&pn->hash_lock); error = __set_item(pn, po); write_unlock_bh(&pn->hash_lock); if (error < 0) @@ -696,8 +693,11 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, po->chan.ops = &pppoe_chan_ops; error = ppp_register_net_channel(dev_net(dev), &po->chan); - if (error) + if (error) { + delete_item(pn, po->pppoe_pa.sid, + po->pppoe_pa.remote, po->pppoe_ifindex); goto err_put; + } sk->sk_state = PPPOX_CONNECTED; } @@ -915,6 +915,14 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) struct pppoe_hdr *ph; int data_len = skb->len; + /* The higher-level PPP code (ppp_unregister_channel()) ensures the PPP + * xmit operations conclude prior to an unregistration call. Thus + * sk->sk_state cannot change, so we don't need to do lock_sock(). + * But, we also can't do a lock_sock since that introduces a potential + * deadlock as we'd reverse the lock ordering used when calling + * ppp_unregister_channel(). + */ + if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED)) goto abort; @@ -944,7 +952,6 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) po->pppoe_pa.remote, NULL, data_len); dev_queue_xmit(skb); - return 1; abort: diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index e7285f01bd0..c2383adcd52 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -95,6 +95,7 @@ enum { /* Misc. stuff */ MAILBOX_COUNT = 16, + MAILBOX_TIMEOUT = 5, PROC_ADDR_RDY = (1 << 31), PROC_ADDR_R = (1 << 30), diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 48b45df85ec..cea7531f4f4 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3916,6 +3916,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } + pci_save_state(pdev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1)); @@ -4070,6 +4071,33 @@ static void __devexit qlge_remove(struct pci_dev *pdev) free_netdev(ndev); } +/* Clean up resources without touching hardware. */ +static void ql_eeh_close(struct net_device *ndev) +{ + int i; + struct ql_adapter *qdev = netdev_priv(ndev); + + if (netif_carrier_ok(ndev)) { + netif_carrier_off(ndev); + netif_stop_queue(ndev); + } + + if (test_bit(QL_ADAPTER_UP, &qdev->flags)) + cancel_delayed_work_sync(&qdev->asic_reset_work); + cancel_delayed_work_sync(&qdev->mpi_reset_work); + cancel_delayed_work_sync(&qdev->mpi_work); + cancel_delayed_work_sync(&qdev->mpi_idc_work); + cancel_delayed_work_sync(&qdev->mpi_port_cfg_work); + + for (i = 0; i < qdev->rss_ring_count; i++) + netif_napi_del(&qdev->rx_ring[i].napi); + + clear_bit(QL_ADAPTER_UP, &qdev->flags); + ql_tx_ring_clean(qdev); + ql_free_rx_buffers(qdev); + ql_release_adapter_resources(qdev); +} + /* * This callback is called by the PCI subsystem whenever * a PCI bus error is detected. @@ -4078,17 +4106,21 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, enum pci_channel_state state) { struct net_device *ndev = pci_get_drvdata(pdev); - struct ql_adapter *qdev = netdev_priv(ndev); - - netif_device_detach(ndev); - if (state == pci_channel_io_perm_failure) + switch (state) { + case pci_channel_io_normal: + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + netif_device_detach(ndev); + if (netif_running(ndev)) + ql_eeh_close(ndev); + pci_disable_device(pdev); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + dev_err(&pdev->dev, + "%s: pci_channel_io_perm_failure.\n", __func__); return PCI_ERS_RESULT_DISCONNECT; - - if (netif_running(ndev)) - ql_adapter_down(qdev); - - pci_disable_device(pdev); + } /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -4105,25 +4137,15 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev) struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); + pdev->error_state = pci_channel_io_normal; + + pci_restore_state(pdev); if (pci_enable_device(pdev)) { QPRINTK(qdev, IFUP, ERR, "Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } - pci_set_master(pdev); - - netif_carrier_off(ndev); - ql_adapter_reset(qdev); - - /* Make sure the EEPROM is good */ - memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); - - if (!is_valid_ether_addr(ndev->perm_addr)) { - QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - return PCI_ERS_RESULT_RECOVERED; } @@ -4131,17 +4153,21 @@ static void qlge_io_resume(struct pci_dev *pdev) { struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); + int err = 0; - pci_set_master(pdev); - + if (ql_adapter_reset(qdev)) + QPRINTK(qdev, DRV, ERR, "reset FAILED!\n"); if (netif_running(ndev)) { - if (ql_adapter_up(qdev)) { + err = qlge_open(ndev); + if (err) { QPRINTK(qdev, IFUP, ERR, "Device initialization failed after reset.\n"); return; } + } else { + QPRINTK(qdev, IFUP, ERR, + "Device was not running prior to EEH.\n"); } - netif_device_attach(ndev); } diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index 99e58e3f8e2..bcf13c96f73 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -470,7 +470,8 @@ end: */ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) { - int status, count; + int status; + unsigned long count; /* Begin polled mode for MPI */ @@ -491,9 +492,9 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the command to complete. We loop * here because some AEN might arrive while * we're waiting for the mailbox command to - * complete. If more than 5 arrive then we can + * complete. If more than 5 seconds expire we can * assume something is wrong. */ - count = 5; + count = jiffies + HZ * MAILBOX_TIMEOUT; do { /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); @@ -517,15 +518,15 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) MB_CMD_STS_GOOD) || ((mbcp->mbox_out[0] & 0x0000f000) == MB_CMD_STS_INTRMDT)) - break; - } while (--count); + goto done; + } while (time_before(jiffies, count)); - if (!count) { - QPRINTK(qdev, DRV, ERR, - "Timed out waiting for mailbox complete.\n"); - status = -ETIMEDOUT; - goto end; - } + QPRINTK(qdev, DRV, ERR, + "Timed out waiting for mailbox complete.\n"); + status = -ETIMEDOUT; + goto end; + +done: /* Now we can clear the interrupt condition * and look at our status. diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 83c47d95c3a..f98ef523f52 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1029,7 +1029,10 @@ static void rtl8169_vlan_rx_register(struct net_device *dev, spin_lock_irqsave(&tp->lock, flags); tp->vlgrp = grp; - if (tp->vlgrp) + /* + * Do not disable RxVlan on 8110SCd. + */ + if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05)) tp->cp_cmd |= RxVlan; else tp->cp_cmd &= ~RxVlan; @@ -3197,6 +3200,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } rtl8169_init_phy(dev, tp); + + /* + * Pretend we are using VLANs; This bypasses a nasty bug where + * Interrupts stop flowing on high load on 8110SCd controllers. + */ + if (tp->mac_version == RTL_GIGA_MAC_VER_05) + RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan); + device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL); out: diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index 01f9432c31e..98bff5ada09 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -444,7 +444,8 @@ static void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue, * the appropriate LRO method */ static void efx_rx_packet_lro(struct efx_channel *channel, - struct efx_rx_buffer *rx_buf) + struct efx_rx_buffer *rx_buf, + bool checksummed) { struct napi_struct *napi = &channel->napi_str; @@ -466,7 +467,8 @@ static void efx_rx_packet_lro(struct efx_channel *channel, skb->len = rx_buf->len; skb->data_len = rx_buf->len; skb->truesize += rx_buf->len; - skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->ip_summed = + checksummed ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE; napi_gro_frags(napi); @@ -475,6 +477,7 @@ out: rx_buf->page = NULL; } else { EFX_BUG_ON_PARANOID(!rx_buf->skb); + EFX_BUG_ON_PARANOID(!checksummed); napi_gro_receive(napi, rx_buf->skb); rx_buf->skb = NULL; @@ -570,7 +573,7 @@ void __efx_rx_packet(struct efx_channel *channel, } if (likely(checksummed || rx_buf->page)) { - efx_rx_packet_lro(channel, rx_buf); + efx_rx_packet_lro(channel, rx_buf, checksummed); goto done; } diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index f49d0800c1d..528b912a4b0 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -30,6 +30,7 @@ #include <linux/phy.h> #include <linux/cache.h> #include <linux/io.h> +#include <asm/cacheflush.h> #include "sh_eth.h" diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 72470f77f55..a2b30a10064 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -649,6 +649,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0a46, 0x9000), /* DM9000E */ + .driver_info = (unsigned long)&dm9601_info, + }, {}, // END }; diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 3709d6af9ab..05630f2f693 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -516,8 +516,7 @@ again: /* Free up any pending old buffers before queueing new ones. */ free_old_xmit_skbs(vi); - /* Put new one in send queue and do transmit */ - __skb_queue_head(&vi->send, skb); + /* Try to transmit */ capacity = xmit_skb(vi, skb); /* This can happen with OOM and indirect buffers. */ @@ -531,8 +530,17 @@ again: } return NETDEV_TX_BUSY; } - vi->svq->vq_ops->kick(vi->svq); + + /* + * Put new one in send queue. You'd expect we'd need this before + * xmit_skb calls add_buf(), since the callback can be triggered + * immediately after that. But since the callback just triggers + * another call back here, normal network xmit locking prevents the + * race. + */ + __skb_queue_head(&vi->send, skb); + /* Don't wait up for transmitted skbs to be freed. */ skb_orphan(skb); nf_reset(skb); diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 7116a1aa20c..abf896a7390 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -4790,9 +4790,8 @@ static int proc_stats_rid_open( struct inode *inode, static int get_dec_u16( char *buffer, int *start, int limit ) { u16 value; int valid = 0; - for( value = 0; buffer[*start] >= '0' && - buffer[*start] <= '9' && - *start < limit; (*start)++ ) { + for (value = 0; *start < limit && buffer[*start] >= '0' && + buffer[*start] <= '9'; (*start)++) { valid = 1; value *= 10; value += buffer[*start] - '0'; diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h index 4c56187810f..32b66d53cda 100644 --- a/drivers/net/wireless/b43/leds.h +++ b/drivers/net/wireless/b43/leds.h @@ -1,6 +1,7 @@ #ifndef B43_LEDS_H_ #define B43_LEDS_H_ +struct b43_wl; struct b43_wldev; #ifdef CONFIG_B43_LEDS diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index df6b26a0c05..86f35827f00 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4501,7 +4501,6 @@ static void b43_op_stop(struct ieee80211_hw *hw) cancel_work_sync(&(wl->beacon_update_trigger)); - wiphy_rfkill_stop_polling(hw->wiphy); mutex_lock(&wl->mutex); if (b43_status(dev) >= B43_STAT_STARTED) { dev = b43_wireless_core_stop(dev); diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 7a3218c5ba7..ffdce6f3c90 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -33,7 +33,8 @@ bool b43_is_hw_radio_enabled(struct b43_wldev *dev) & B43_MMIO_RADIO_HWENABLED_HI_MASK)) return 1; } else { - if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO) + if (b43_status(dev) >= B43_STAT_STARTED && + b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO) & B43_MMIO_RADIO_HWENABLED_LO_MASK) return 1; } diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index cb8be8d7abc..5b3672c4d0c 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -134,7 +134,7 @@ static void spu_transaction_finish(struct if_spi_card *card) static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) { int err = 0; - u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); + __le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); struct spi_message m; struct spi_transfer reg_trans; struct spi_transfer data_trans; @@ -166,7 +166,7 @@ static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val) { - u16 buff; + __le16 buff; buff = cpu_to_le16(val); return spu_write(card, reg, (u8 *)&buff, sizeof(u16)); @@ -188,7 +188,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) { unsigned int delay; int err = 0; - u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); + __le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); struct spi_message m; struct spi_transfer reg_trans; struct spi_transfer dummy_trans; @@ -235,7 +235,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) /* Read 16 bits from an SPI register */ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) { - u16 buf; + __le16 buf; int ret; ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); @@ -248,7 +248,7 @@ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) * The low 16 bits are read first. */ static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val) { - u32 buf; + __le32 buf; int err; err = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index a084077a1c6..9fe770f7d7b 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1994,7 +1994,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? - (skbdesc->entry->entry_idx + 1) : 0xff); + txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, skb->len - txdesc->l2pad); rt2x00_set_field32(&word, TXWI_W1_PACKETID, diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 86acdba0a97..6eb8d47cbf3 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -335,6 +335,7 @@ struct pktgen_dev { __u32 cur_src_mac_offset; __be32 cur_saddr; __be32 cur_daddr; + __u16 ip_id; __u16 cur_udp_dst; __u16 cur_udp_src; __u16 cur_queue_map; @@ -2630,6 +2631,8 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev, iph->protocol = IPPROTO_UDP; /* UDP */ iph->saddr = pkt_dev->cur_saddr; iph->daddr = pkt_dev->cur_daddr; + iph->id = htons(pkt_dev->ip_id); + pkt_dev->ip_id++; iph->frag_off = 0; iplen = 20 + 8 + datalen; iph->tot_len = htons(iplen); @@ -2641,24 +2644,26 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev, skb->dev = odev; skb->pkt_type = PACKET_HOST; - if (pkt_dev->nfrags <= 0) + if (pkt_dev->nfrags <= 0) { pgh = (struct pktgen_hdr *)skb_put(skb, datalen); - else { + memset(pgh + 1, 0, datalen - sizeof(struct pktgen_hdr)); + } else { int frags = pkt_dev->nfrags; - int i; + int i, len; pgh = (struct pktgen_hdr *)(((char *)(udph)) + 8); if (frags > MAX_SKB_FRAGS) frags = MAX_SKB_FRAGS; if (datalen > frags * PAGE_SIZE) { - skb_put(skb, datalen - frags * PAGE_SIZE); + len = datalen - frags * PAGE_SIZE; + memset(skb_put(skb, len), 0, len); datalen = frags * PAGE_SIZE; } i = 0; while (datalen > 0) { - struct page *page = alloc_pages(GFP_KERNEL, 0); + struct page *page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); skb_shinfo(skb)->frags[i].page = page; skb_shinfo(skb)->frags[i].page_offset = 0; skb_shinfo(skb)->frags[i].size = diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 757c9171e7c..ab996f9c0fe 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -352,13 +352,24 @@ static int raw_send_hdrinc(struct sock *sk, void *from, size_t length, skb->ip_summed = CHECKSUM_NONE; skb->transport_header = skb->network_header; - err = memcpy_fromiovecend((void *)iph, from, 0, length); - if (err) - goto error_fault; + err = -EFAULT; + if (memcpy_fromiovecend((void *)iph, from, 0, length)) + goto error_free; - /* We don't modify invalid header */ iphlen = iph->ihl * 4; - if (iphlen >= sizeof(*iph) && iphlen <= length) { + + /* + * We don't want to modify the ip header, but we do need to + * be sure that it won't cause problems later along the network + * stack. Specifically we want to make sure that iph->ihl is a + * sane value. If ihl points beyond the length of the buffer passed + * in, reject the frame as invalid + */ + err = -EINVAL; + if (iphlen > length) + goto error_free; + + if (iphlen >= sizeof(*iph)) { if (!iph->saddr) iph->saddr = rt->rt_src; iph->check = 0; @@ -381,8 +392,7 @@ static int raw_send_hdrinc(struct sock *sk, void *from, size_t length, out: return 0; -error_fault: - err = -EFAULT; +error_free: kfree_skb(skb); error: IP_INC_STATS(net, IPSTATS_MIB_OUTDISCARDS); diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 90b2e0649bf..98440ad8255 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1442,9 +1442,9 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, goto found_ok_skb; if (tcp_hdr(skb)->fin) goto found_fin_ok; - if (WARN_ON(!(flags & MSG_PEEK))) - printk(KERN_INFO "recvmsg bug 2: copied %X " - "seq %X\n", *seq, TCP_SKB_CB(skb)->seq); + WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: " + "copied %X seq %X\n", *seq, + TCP_SKB_CB(skb)->seq); } /* Well, if we have backlog, try to process it now yet. */ diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 6eaf6982343..ca8ecce31d3 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -538,13 +538,12 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) WLAN_CAPABILITY_PRIVACY, capability); + if (bss) { #ifdef CONFIG_MAC80211_IBSS_DEBUG - if (bss) printk(KERN_DEBUG " sta_find_ibss: selected %pM current " "%pM\n", bss->cbss.bssid, ifibss->bssid); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ - if (bss && !memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) { printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM" " based on configured SSID\n", sdata->dev->name, bss->cbss.bssid); @@ -552,8 +551,7 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) ieee80211_sta_join_ibss(sdata, bss); ieee80211_rx_bss_put(local, bss); return; - } else if (bss) - ieee80211_rx_bss_put(local, bss); + } #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG " did not try to join ibss\n"); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index e12a786e26b..29b82e98eff 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -259,7 +259,7 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, * @hwmp_ie: hwmp information element (PREP or PREQ) * * This function updates the path routing information to the originator and the - * transmitter of a HWMP PREQ or PREP fram. + * transmitter of a HWMP PREQ or PREP frame. * * Returns: metric to frame originator or 0 if the frame should not be further * processed diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8d26e9bf896..dc5049d58c5 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1457,8 +1457,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, if (status_code != WLAN_STATUS_SUCCESS) { printk(KERN_DEBUG "%s: AP denied association (code=%d)\n", sdata->dev->name, status_code); - list_del(&wk->list); - kfree(wk); + wk->state = IEEE80211_MGD_STATE_IDLE; return RX_MGMT_CFG80211_ASSOC; } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index db4bda681ec..eaa4118de98 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1445,7 +1445,7 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, if (tmp_sdata->vif.type != NL80211_IFTYPE_AP) continue; if (compare_ether_addr(tmp_sdata->dev->dev_addr, - hdr->addr2)) { + hdr->addr2) == 0) { dev_hold(tmp_sdata->dev); dev_put(sdata->dev); sdata = tmp_sdata; diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index d7ecca0a0c0..f2d116a5cb3 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -982,10 +982,7 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) goto out_put; size_max = po->tx_ring.frame_size - - sizeof(struct skb_shared_info) - - po->tp_hdrlen - - LL_ALLOCATED_SPACE(dev) - - sizeof(struct sockaddr_ll); + - (po->tp_hdrlen - sizeof(struct sockaddr_ll)); if (size_max > dev->mtu + reserve) size_max = dev->mtu + reserve; diff --git a/net/wireless/core.h b/net/wireless/core.h index 2a33d8bc886..68b321997d4 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -358,6 +358,7 @@ int cfg80211_mgd_wext_connect(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev); void cfg80211_conn_work(struct work_struct *work); +void cfg80211_sme_failed_assoc(struct wireless_dev *wdev); bool cfg80211_sme_failed_reassoc(struct wireless_dev *wdev); /* internal helpers */ diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 79d2eec54ce..0a6b7a0eca6 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -62,6 +62,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) u8 *ie = mgmt->u.assoc_resp.variable; int i, ieoffs = offsetof(struct ieee80211_mgmt, u.assoc_resp.variable); struct cfg80211_internal_bss *bss = NULL; + bool need_connect_result = true; wdev_lock(wdev); @@ -94,6 +95,14 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) } WARN_ON(!bss); + } else if (wdev->conn) { + cfg80211_sme_failed_assoc(wdev); + need_connect_result = false; + /* + * do not call connect_result() now because the + * sme will schedule work that does it later. + */ + goto out; } if (!wdev->conn && wdev->sme_state == CFG80211_SME_IDLE) { diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 93c3ed32920..ece378d531e 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -26,6 +26,7 @@ struct cfg80211_conn { CFG80211_CONN_AUTHENTICATING, CFG80211_CONN_ASSOCIATE_NEXT, CFG80211_CONN_ASSOCIATING, + CFG80211_CONN_DEAUTH_ASSOC_FAIL, } state; u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; u8 *ie; @@ -148,6 +149,12 @@ static int cfg80211_conn_do_work(struct wireless_dev *wdev) NULL, 0, WLAN_REASON_DEAUTH_LEAVING); return err; + case CFG80211_CONN_DEAUTH_ASSOC_FAIL: + __cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, + NULL, 0, + WLAN_REASON_DEAUTH_LEAVING); + /* return an error so that we call __cfg80211_connect_result() */ + return -EINVAL; default: return 0; } @@ -158,6 +165,7 @@ void cfg80211_conn_work(struct work_struct *work) struct cfg80211_registered_device *rdev = container_of(work, struct cfg80211_registered_device, conn_work); struct wireless_dev *wdev; + u8 bssid[ETH_ALEN]; rtnl_lock(); cfg80211_lock_rdev(rdev); @@ -173,10 +181,10 @@ void cfg80211_conn_work(struct work_struct *work) wdev_unlock(wdev); continue; } + memcpy(bssid, wdev->conn->params.bssid, ETH_ALEN); if (cfg80211_conn_do_work(wdev)) __cfg80211_connect_result( - wdev->netdev, - wdev->conn->params.bssid, + wdev->netdev, bssid, NULL, 0, NULL, 0, WLAN_STATUS_UNSPECIFIED_FAILURE, false, NULL); @@ -337,6 +345,15 @@ bool cfg80211_sme_failed_reassoc(struct wireless_dev *wdev) return true; } +void cfg80211_sme_failed_assoc(struct wireless_dev *wdev) +{ + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + + wdev->conn->state = CFG80211_CONN_DEAUTH_ASSOC_FAIL; + schedule_work(&rdev->conn_work); +} + void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, const u8 *req_ie, size_t req_ie_len, const u8 *resp_ie, size_t resp_ie_len, |