aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2010-03-05 22:17:13 +0100
committerJean Delvare <khali@linux-fr.org>2010-03-05 22:17:13 +0100
commit6771ea1fff988651593f78c122bc02e80f5100a0 (patch)
treea7583f89769b553d7d8bbba42d30687043cd4a35
parent64ba9926759792cf7b95f823402e2781edd1b5d4 (diff)
hwmon: (lm90) Add support for the Winbond/Nuvoton W83L771AWG/ASG
This chips is found on several Zotac Ion ITX boards, amongst others. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: MC Matti <mcmatti17@googlemail.com> Cc: Manuel Lamotte-Schubert <mls@pronego.com>
-rw-r--r--Documentation/hwmon/lm9010
-rw-r--r--drivers/hwmon/Kconfig5
-rw-r--r--drivers/hwmon/lm90.c12
3 files changed, 24 insertions, 3 deletions
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 93d8e3d5515..08106ad7089 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -84,6 +84,10 @@ Supported chips:
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+ * Winbond/Nuvoton W83L771AWG/ASG
+ Prefix: 'w83l771'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Not publicly available, can be requested from Nuvoton
Author: Jean Delvare <khali@linux-fr.org>
@@ -147,6 +151,12 @@ MAX6680 and MAX6681:
* Selectable address
* Remote sensor type selection
+W83L771AWG/ASG
+ * The AWG and ASG variants only differ in package format.
+ * Filter and alert configuration register at 0xBF
+ * Diode ideality factor configuration (remote sensor) at 0xE3
+ * Moving average (depending on conversion rate)
+
All temperature values are given in degrees Celsius. Resolution
is 1.0 degree for the local temperature, 0.125 degree for the remote
temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 68cf87749a4..9234c2e2c7d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -563,9 +563,10 @@ config SENSORS_LM90
depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+ LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
- MAX6680, MAX6681 and MAX6692 sensor chips.
+ MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
+ sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 7c9bdc16742..ddf617f3a71 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -93,7 +93,8 @@
static const unsigned short normal_i2c[] = {
0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
-enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646 };
+enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646,
+ w83l771 };
/*
* The LM90 registers
@@ -173,6 +174,7 @@ static const struct i2c_device_id lm90_id[] = {
{ "max6659", max6657 },
{ "max6680", max6680 },
{ "max6681", max6680 },
+ { "w83l771", w83l771 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm90_id);
@@ -758,6 +760,14 @@ static int lm90_detect(struct i2c_client *new_client,
&& reg_convrate <= 0x07) {
name = "max6646";
}
+ } else
+ if (address == 0x4C
+ && man_id == 0x5C) { /* Winbond/Nuvoton */
+ if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
+ && (reg_config1 & 0x2A) == 0x00
+ && reg_convrate <= 0x08) {
+ name = "w83l771";
+ }
}
if (!name) { /* identification failed */