aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTomas Winkler <tomas.winkler@intel.com>2008-06-12 09:47:12 +0800
committerJohn W. Linville <linville@tuxdriver.com>2008-06-14 12:18:08 -0400
commitf53696de6722a4aac00b76e25a5321c01e88a55f (patch)
treecd735b6fd5bfa7a5ba593eb591cfc6d62d26e7dd
parente7d326ac437e9e9425dcd79382f4e5f6ca31fb16 (diff)
iwlwifi: cleans up scanning code
This patch 1. cleans up scanning code. 2. It adds round robin of TX antannas/chains. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-commands.h14
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.c1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-dev.h33
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-scan.c178
5 files changed, 107 insertions, 120 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 058e7641504..6613d323262 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -281,16 +281,7 @@ struct iwl_cmd_header {
#define RATE_MCS_ANT_C_MSK 0x10000
#define RATE_MCS_ANT_ABC_MSK 0x1C000
-
-/**
- * struct iwl4965_tx_power - txpower format used in REPLY_SCAN_CMD
- *
- * Scan uses only one transmitter, so only one analog/dsp gain pair is needed.
- */
-struct iwl4965_tx_power {
- u8 tx_gain; /* gain for analog radio */
- u8 dsp_atten; /* gain for DSP */
-} __attribute__ ((packed));
+#define RATE_MCS_ANT_INIT_IND 1
#define POWER_TABLE_NUM_ENTRIES 33
#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32
@@ -2128,7 +2119,8 @@ struct iwl_scan_channel {
*/
u8 type;
u8 channel; /* band is selected by iwl4965_scan_cmd "flags" field */
- struct iwl4965_tx_power tpc;
+ u8 tx_gain; /* gain for analog radio */
+ u8 dsp_atten; /* gain for DSP */
__le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
__le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
} __attribute__ ((packed));
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 7e20f46132d..9794904b5bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -874,6 +874,7 @@ int iwl_init_drv(struct iwl_priv *priv)
/* Choose which receivers/antennas to use */
iwl_set_rxon_chain(priv);
+ iwl_init_scan_params(priv);
if (priv->cfg->mod_params->enable_qos)
priv->qos_data.qos_enable = 1;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 2eb08f3937f..8d9fde61a36 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -267,6 +267,7 @@ static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags)
/*******************************************************************************
* Scanning
******************************************************************************/
+void iwl_init_scan_params(struct iwl_priv *priv);
int iwl_scan_cancel(struct iwl_priv *priv);
int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
const char *iwl_escape_essid(const char *essid, u8 essid_len);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 69765c975d3..ef7415928b7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -157,35 +157,11 @@ struct iwl4965_channel_tgh_info {
s64 last_radar_time;
};
-/* current Tx power values to use, one for each rate for each channel.
- * requested power is limited by:
- * -- regulatory EEPROM limits for this channel
- * -- hardware capabilities (clip-powers)
- * -- spectrum management
- * -- user preference (e.g. iwconfig)
- * when requested power is set, base power index must also be set. */
-struct iwl4965_channel_power_info {
- struct iwl4965_tx_power tpc; /* actual radio and DSP gain settings */
- s8 power_table_index; /* actual (compenst'd) index into gain table */
- s8 base_power_index; /* gain index for power at factory temp. */
- s8 requested_power; /* power (dBm) requested for this chnl/rate */
-};
-
-/* current scan Tx power values to use, one for each scan rate for each
- * channel. */
-struct iwl4965_scan_power_info {
- struct iwl4965_tx_power tpc; /* actual radio and DSP gain settings */
- s8 power_table_index; /* actual (compenst'd) index into gain table */
- s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
-};
-
/*
* One for each channel, holds all channel setup data
* Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
* with one another!
*/
-#define IWL4965_MAX_RATE (33)
-
struct iwl_channel_info {
struct iwl4965_channel_tgd_info tgd;
struct iwl4965_channel_tgh_info tgh;
@@ -204,11 +180,6 @@ struct iwl_channel_info {
u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
enum ieee80211_band band;
- /* Radio/DSP gain settings for each "normal" data Tx rate.
- * These include, in addition to RF and DSP gain, a few fields for
- * remembering/modifying gain settings (indexes). */
- struct iwl4965_channel_power_info power_info[IWL4965_MAX_RATE];
-
/* FAT channel info */
s8 fat_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
s8 fat_curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */
@@ -216,9 +187,6 @@ struct iwl_channel_info {
s8 fat_scan_power; /* (dBm) eeprom, direct scans, any rate */
u8 fat_flags; /* flags copied from EEPROM */
u8 fat_extension_channel; /* HT_IE_EXT_CHANNEL_* */
-
- /* Radio/DSP gain settings for each scan rate, for directed scans. */
- struct iwl4965_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
};
struct iwl4965_clip_group {
@@ -974,6 +942,7 @@ struct iwl_priv {
u8 direct_ssid_len;
u8 direct_ssid[IW_ESSID_MAX_SIZE];
struct iwl_scan_cmd *scan;
+ u32 scan_tx_ant[IEEE80211_NUM_BANDS];
/* spinlock */
spinlock_t lock; /* protect general shared data */
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 7b9475b7f0f..5ca181f7125 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -58,7 +58,9 @@
#define IWL_PASSIVE_DWELL_BASE (100)
#define IWL_CHANNEL_TUNE_TIME 5
-
+static int scan_tx_ant[3] = {
+ RATE_MCS_ANT_A_MSK, RATE_MCS_ANT_B_MSK, RATE_MCS_ANT_C_MSK
+};
static int iwl_is_empty_essid(const char *essid, int essid_len)
{
@@ -385,8 +387,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
scan_ch->channel =
ieee80211_frequency_to_channel(channels[i].center_freq);
- ch_info = iwl_get_channel_info(priv, band,
- scan_ch->channel);
+ ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
scan_ch->channel);
@@ -395,9 +396,9 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
if (!is_active || is_channel_passive(ch_info) ||
(channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
- scan_ch->type = 0; /* passive */
+ scan_ch->type = 0;
else
- scan_ch->type = 1; /* active */
+ scan_ch->type = 1;
if (scan_ch->type & 1)
scan_ch->type |= (direct_mask << 1);
@@ -406,17 +407,15 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
/* Set txpower levels to defaults */
- scan_ch->tpc.dsp_atten = 110;
- /* scan_pwr_info->tpc.dsp_atten; */
+ scan_ch->dsp_atten = 110;
- /*scan_pwr_info->tpc.tx_gain; */
if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
else {
- scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
/* NOTE: if we were doing 6Mb OFDM for scans we'd use
* power level:
- * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
*/
}
@@ -434,6 +433,14 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
return added;
}
+void iwl_init_scan_params(struct iwl_priv *priv)
+{
+ if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
+ priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = RATE_MCS_ANT_INIT_IND;
+ if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
+ priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = RATE_MCS_ANT_INIT_IND;
+}
+
int iwl_scan_initiate(struct iwl_priv *priv)
{
if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
@@ -522,7 +529,7 @@ static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
- u8 *pos, int *left)
+ u8 *pos, int *left)
{
struct ieee80211_ht_cap *ht_cap;
@@ -547,10 +554,11 @@ static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
/**
* iwl_fill_probe_req - fill in all required fields and IE for probe request
*/
+
static u16 iwl_fill_probe_req(struct iwl_priv *priv,
enum ieee80211_band band,
struct ieee80211_mgmt *frame,
- int left, int is_direct)
+ int left)
{
int len = 0;
u8 *pos = NULL;
@@ -558,12 +566,12 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv,
const struct ieee80211_supported_band *sband =
iwl_get_hw_mode(priv, band);
+
/* Make sure there is enough space for the probe request,
* two mandatory IEs and the data */
left -= 24;
if (left < 0)
return 0;
- len += 24;
frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
@@ -571,38 +579,25 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv,
memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
frame->seq_ctrl = 0;
- /* fill in our indirect SSID IE */
+ len += 24;
+
/* ...next IE... */
+ pos = &frame->u.probe_req.variable[0];
+ /* fill in our indirect SSID IE */
left -= 2;
if (left < 0)
return 0;
- len += 2;
- pos = &(frame->u.probe_req.variable[0]);
*pos++ = WLAN_EID_SSID;
*pos++ = 0;
- /* fill in our direct SSID IE... */
- if (is_direct) {
- /* ...next IE... */
- left -= 2 + priv->essid_len;
- if (left < 0)
- return 0;
- /* ... fill it in... */
- *pos++ = WLAN_EID_SSID;
- *pos++ = priv->essid_len;
- memcpy(pos, priv->essid, priv->essid_len);
- pos += priv->essid_len;
- len += 2 + priv->essid_len;
- }
+ len += 2;
/* fill in supported rate */
- /* ...next IE... */
left -= 2;
if (left < 0)
return 0;
- /* ... fill it in... */
*pos++ = WLAN_EID_SUPP_RATES;
*pos = 0;
@@ -614,15 +609,16 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv,
cck_rates = IWL_CCK_RATES_MASK & active_rates;
ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
- active_rate_basic, &left);
+ active_rate_basic, &left);
active_rates &= ~ret_rates;
ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
- active_rate_basic, &left);
+ active_rate_basic, &left);
active_rates &= ~ret_rates;
len += 2 + *pos;
pos += (*pos) + 1;
+
if (active_rates == 0)
goto fill_end;
@@ -634,27 +630,46 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv,
/* ... fill it in... */
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos = 0;
- iwl_supported_rate_to_ie(pos, active_rates,
- active_rate_basic, &left);
- if (*pos > 0)
+ iwl_supported_rate_to_ie(pos, active_rates, active_rate_basic, &left);
+ if (*pos > 0) {
len += 2 + *pos;
+ pos += (*pos) + 1;
+ } else {
+ pos--;
+ }
fill_end:
- /* fill in HT IE */
+
left -= 2;
if (left < 0)
return 0;
*pos++ = WLAN_EID_HT_CAPABILITY;
*pos = 0;
-
iwl_ht_cap_to_ie(sband, pos, &left);
-
if (*pos > 0)
len += 2 + *pos;
+
return (u16)len;
}
+static u32 iwl_scan_tx_ant(struct iwl_priv *priv, enum ieee80211_band band)
+{
+ int i, ind;
+
+ ind = priv->scan_tx_ant[band];
+ for (i = 0; i < priv->hw_params.tx_chains_num; i++) {
+ ind = (ind+1) >= priv->hw_params.tx_chains_num ? 0 : ind+1;
+ if (priv->hw_params.valid_tx_ant & (1 << ind)) {
+ priv->scan_tx_ant[band] = ind;
+ break;
+ }
+ }
+
+ return scan_tx_ant[ind];
+}
+
+
static void iwl_bg_request_scan(struct work_struct *data)
{
struct iwl_priv *priv =
@@ -666,10 +681,12 @@ static void iwl_bg_request_scan(struct work_struct *data)
};
struct iwl_scan_cmd *scan;
struct ieee80211_conf *conf = NULL;
+ int ret = 0;
+ u32 tx_ant;
u16 cmd_len;
enum ieee80211_band band;
u8 direct_mask;
- int ret = 0;
+ u8 rx_chain = 0x7; /* bitmap: ABC chains */
conf = ieee80211_get_hw_conf(priv->hw);
@@ -761,25 +778,23 @@ static void iwl_bg_request_scan(struct work_struct *data)
/* We should add the ability for user to lock to PASSIVE ONLY */
if (priv->one_direct_scan) {
- IWL_DEBUG_SCAN
- ("Kicking off one direct scan for '%s'\n",
- iwl_escape_essid(priv->direct_ssid,
- priv->direct_ssid_len));
+ IWL_DEBUG_SCAN("Start direct scan for '%s'\n",
+ iwl_escape_essid(priv->direct_ssid,
+ priv->direct_ssid_len));
scan->direct_scan[0].id = WLAN_EID_SSID;
scan->direct_scan[0].len = priv->direct_ssid_len;
memcpy(scan->direct_scan[0].ssid,
priv->direct_ssid, priv->direct_ssid_len);
direct_mask = 1;
} else if (!iwl_is_associated(priv) && priv->essid_len) {
- IWL_DEBUG_SCAN
- ("Kicking off one direct scan for '%s' when not associated\n",
- iwl_escape_essid(priv->essid, priv->essid_len));
+ IWL_DEBUG_SCAN("Start direct scan for '%s' (not associated)\n",
+ iwl_escape_essid(priv->essid, priv->essid_len));
scan->direct_scan[0].id = WLAN_EID_SSID;
scan->direct_scan[0].len = priv->essid_len;
memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
direct_mask = 1;
} else {
- IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
+ IWL_DEBUG_SCAN("Start indirect scan.\n");
direct_mask = 0;
}
@@ -790,64 +805,73 @@ static void iwl_bg_request_scan(struct work_struct *data)
switch (priv->scan_bands) {
case 2:
+ band = IEEE80211_BAND_2GHZ;
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- scan->tx_cmd.rate_n_flags =
+ tx_ant = iwl_scan_tx_ant(priv, band);
+ if (priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK)
+ scan->tx_cmd.rate_n_flags =
+ iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
+ tx_ant);
+ else
+ scan->tx_cmd.rate_n_flags =
iwl_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
- RATE_MCS_ANT_B_MSK|
+ tx_ant |
RATE_MCS_CCK_MSK);
-
scan->good_CRC_th = 0;
- band = IEEE80211_BAND_2GHZ;
break;
case 1:
+ band = IEEE80211_BAND_5GHZ;
+ tx_ant = iwl_scan_tx_ant(priv, band);
scan->tx_cmd.rate_n_flags =
iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
- RATE_MCS_ANT_B_MSK);
+ tx_ant);
scan->good_CRC_th = IWL_GOOD_CRC_TH;
- band = IEEE80211_BAND_5GHZ;
- break;
+ /* Force use of chains B and C (0x6) for scan Rx for 4965
+ * Avoid A (0x1) because of its off-channel reception on A-band.
+ * MIMO is not used here, but value is required */
+ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
+ rx_chain = 0x6;
+
+ break;
default:
IWL_WARNING("Invalid scan band count\n");
goto done;
}
- /* We don't build a direct scan probe request; the uCode will do
- * that based on the direct_mask added to each channel entry */
+ scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
+ cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
+ (rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) |
+ (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
+
cmd_len = iwl_fill_probe_req(priv, band,
- (struct ieee80211_mgmt *)scan->data,
- IWL_MAX_SCAN_SIZE - sizeof(*scan), 0);
+ (struct ieee80211_mgmt *)scan->data,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan));
scan->tx_cmd.len = cpu_to_le16(cmd_len);
- /* select Rx chains */
-
- /* Force use of chains B and C (0x6) for scan Rx.
- * Avoid A (0x1) because of its off-channel reception on A-band.
- * MIMO is not used here, but value is required to make uCode happy. */
- scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
- cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
- (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) |
- (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
scan->filter_flags = RXON_FILTER_PROMISC_MSK;
+ scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+ RXON_FILTER_BCON_AWARE_MSK);
+
if (direct_mask)
scan->channel_count =
- iwl_get_channels_for_scan(
- priv, band, 1, /* active */
- direct_mask,
+ iwl_get_channels_for_scan(priv, band, 1, /* active */
+ direct_mask,
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
else
scan->channel_count =
- iwl_get_channels_for_scan(
- priv, band, 0, /* passive */
- direct_mask,
+ iwl_get_channels_for_scan(priv, band, 0, /* passive */
+ direct_mask,
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+ if (scan->channel_count == 0) {
+ IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count);
+ goto done;
+ }
- scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
- RXON_FILTER_BCON_AWARE_MSK);
cmd.len += le16_to_cpu(scan->tx_cmd.len) +
scan->channel_count * sizeof(struct iwl_scan_channel);
cmd.data = scan;