[PATCH] SharpSL: Add an input keyboard driver for Zaurus cxx00 series

Add a input driver for the keyboard found on the Zaurus Cxx00 series (Spitz,
Akita, Borzoi).  Its based on corgikbd but there are enough subtle differences
to justify a separate driver.

Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

3 files changed, 490 insertions, 0 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index e55dee39077..444f7756fee 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -132,6 +132,17 @@ config KEYBOARD_CORGI
 	  To compile this driver as a module, choose M here: the 
 	  module will be called corgikbd.
 
+config KEYBOARD_SPITZ
+	tristate "Spitz keyboard"
+	depends on PXA_SHARPSL
+	default y
+	help
+	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+	  SL-C3000 and Sl-C3100 series of PDAs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called spitzkbd.
+
 config KEYBOARD_MAPLE
 	tristate "Maple bus keyboard"
 	depends on SH_DREAMCAST && MAPLE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index b02eeceea3c..9ce0b87f2fa 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_98KBD)		+= 98kbd.o
 obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
+obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
new file mode 100644
index 00000000000..1714045a182
--- /dev/null
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -0,0 +1,478 @@
+/*
+ *  Keyboard driver for Sharp Spitz, Borzoi and Akita (SL-Cxx00 series)
+ *
+ *  Copyright (c) 2005 Richard Purdie
+ *
+ *  Based on corgikbd.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <asm/irq.h>
+
+#include <asm/arch/spitz.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+
+#define KB_ROWS			7
+#define KB_COLS			11
+#define KB_ROWMASK(r)		(1 << (r))
+#define SCANCODE(r,c)		(((r)<<4) + (c) + 1)
+#define	NR_SCANCODES		((KB_ROWS<<4) + 1)
+
+#define HINGE_SCAN_INTERVAL	(150) /* ms */
+
+#define SPITZ_KEY_CALENDER	KEY_F1
+#define SPITZ_KEY_ADDRESS	KEY_F2
+#define SPITZ_KEY_FN		KEY_F3
+#define SPITZ_KEY_CANCEL	KEY_F4
+#define SPITZ_KEY_EXOK		KEY_F5
+#define SPITZ_KEY_EXCANCEL	KEY_F6
+#define SPITZ_KEY_EXJOGDOWN	KEY_F7
+#define SPITZ_KEY_EXJOGUP	KEY_F8
+#define SPITZ_KEY_JAP1		KEY_LEFTALT
+#define SPITZ_KEY_JAP2		KEY_RIGHTCTRL
+#define SPITZ_KEY_SYNC		KEY_F9
+#define SPITZ_KEY_MAIL		KEY_F10
+#define SPITZ_KEY_OK		KEY_F11
+#define SPITZ_KEY_MENU		KEY_F12
+
+static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
+	0,                                                                                                                /* 0 */
+	KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0,  /* 1-16 */
+	0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
+	KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0,                                 /* 33-48 */
+	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0,         /* 49-64 */
+	SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
+	SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0,      /* 81-96 */
+	KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0  /* 97-112 */
+};
+
+static int spitz_strobes[] = {
+	SPITZ_GPIO_KEY_STROBE0,
+	SPITZ_GPIO_KEY_STROBE1,
+	SPITZ_GPIO_KEY_STROBE2,
+	SPITZ_GPIO_KEY_STROBE3,
+	SPITZ_GPIO_KEY_STROBE4,
+	SPITZ_GPIO_KEY_STROBE5,
+	SPITZ_GPIO_KEY_STROBE6,
+	SPITZ_GPIO_KEY_STROBE7,
+	SPITZ_GPIO_KEY_STROBE8,
+	SPITZ_GPIO_KEY_STROBE9,
+	SPITZ_GPIO_KEY_STROBE10,
+};
+
+static int spitz_senses[] = {
+	SPITZ_GPIO_KEY_SENSE0,
+	SPITZ_GPIO_KEY_SENSE1,
+	SPITZ_GPIO_KEY_SENSE2,
+	SPITZ_GPIO_KEY_SENSE3,
+	SPITZ_GPIO_KEY_SENSE4,
+	SPITZ_GPIO_KEY_SENSE5,
+	SPITZ_GPIO_KEY_SENSE6,
+};
+
+struct spitzkbd {
+	unsigned char keycode[ARRAY_SIZE(spitzkbd_keycode)];
+	struct input_dev input;
+	char phys[32];
+
+	spinlock_t lock;
+	struct timer_list timer;
+	struct timer_list htimer;
+
+	unsigned int suspended;
+	unsigned long suspend_jiffies;
+};
+
+#define KB_DISCHARGE_DELAY	10
+#define KB_ACTIVATE_DELAY	10
+
+/* Helper functions for reading the keyboard matrix
+ * Note: We should really be using pxa_gpio_mode to alter GPDR but it
+ *       requires a function call per GPIO bit which is excessive
+ *       when we need to access 11 bits at once, multiple times.
+ * These functions must be called within local_irq_save()/local_irq_restore()
+ * or similar.
+ */
+static inline void spitzkbd_discharge_all(void)
+{
+	/* STROBE All HiZ */
+	GPCR0  =  SPITZ_GPIO_G0_STROBE_BIT;
+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
+	GPCR1  =  SPITZ_GPIO_G1_STROBE_BIT;
+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
+	GPCR2  =  SPITZ_GPIO_G2_STROBE_BIT;
+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
+	GPCR3  =  SPITZ_GPIO_G3_STROBE_BIT;
+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
+}
+
+static inline void spitzkbd_activate_all(void)
+{
+	/* STROBE ALL -> High */
+	GPSR0  =  SPITZ_GPIO_G0_STROBE_BIT;
+	GPDR0 |=  SPITZ_GPIO_G0_STROBE_BIT;
+	GPSR1  =  SPITZ_GPIO_G1_STROBE_BIT;
+	GPDR1 |=  SPITZ_GPIO_G1_STROBE_BIT;
+	GPSR2  =  SPITZ_GPIO_G2_STROBE_BIT;
+	GPDR2 |=  SPITZ_GPIO_G2_STROBE_BIT;
+	GPSR3  =  SPITZ_GPIO_G3_STROBE_BIT;
+	GPDR3 |=  SPITZ_GPIO_G3_STROBE_BIT;
+
+	udelay(KB_DISCHARGE_DELAY);
+
+	/* Clear any interrupts we may have triggered when altering the GPIO lines */
+	GEDR0 = SPITZ_GPIO_G0_SENSE_BIT;
+	GEDR1 = SPITZ_GPIO_G1_SENSE_BIT;
+	GEDR2 = SPITZ_GPIO_G2_SENSE_BIT;
+	GEDR3 = SPITZ_GPIO_G3_SENSE_BIT;
+}
+
+static inline void spitzkbd_activate_col(int col)
+{
+	int gpio = spitz_strobes[col];
+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
+	GPSR(gpio) = GPIO_bit(gpio);
+	GPDR(gpio) |= GPIO_bit(gpio);
+}
+
+static inline void spitzkbd_reset_col(int col)
+{
+	int gpio = spitz_strobes[col];
+	GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
+	GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
+	GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
+	GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
+	GPCR(gpio) = GPIO_bit(gpio);
+	GPDR(gpio) |= GPIO_bit(gpio);
+}
+
+static inline int spitzkbd_get_row_status(int col)
+{
+	return ((GPLR0 >> 12) & 0x01) | ((GPLR0 >> 16) & 0x02)
+		| ((GPLR2 >> 25) & 0x04) | ((GPLR1 << 1) & 0x08)
+		| ((GPLR1 >> 0) & 0x10) | ((GPLR1 >> 1) & 0x60);
+}
+
+/*
+ * The spitz keyboard only generates interrupts when a key is pressed.
+ * When a key is pressed, we enable a timer which then scans the
+ * keyboard to detect when the key is released.
+ */
+
+/* Scan the hardware keyboard and push any changes up through the input layer */
+static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs *regs)
+{
+	unsigned int row, col, rowd;
+	unsigned long flags;
+	unsigned int num_pressed, pwrkey = ((GPLR(SPITZ_GPIO_ON_KEY) & GPIO_bit(SPITZ_GPIO_ON_KEY)) != 0);
+
+	if (spitzkbd_data->suspended)
+		return;
+
+	spin_lock_irqsave(&spitzkbd_data->lock, flags);
+
+	if (regs)
+		input_regs(&spitzkbd_data->input, regs);
+
+	num_pressed = 0;
+	for (col = 0; col < KB_COLS; col++) {
+		/*
+		 * Discharge the output driver capacitatance
+		 * in the keyboard matrix. (Yes it is significant..)
+		 */
+
+		spitzkbd_discharge_all();
+		udelay(KB_DISCHARGE_DELAY);
+
+		spitzkbd_activate_col(col);
+		udelay(KB_ACTIVATE_DELAY);
+
+		rowd = spitzkbd_get_row_status(col);
+		for (row = 0; row < KB_ROWS; row++) {
+			unsigned int scancode, pressed;
+
+			scancode = SCANCODE(row, col);
+			pressed = rowd & KB_ROWMASK(row);
+
+			input_report_key(&spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed);
+
+			if (pressed)
+				num_pressed++;
+		}
+		spitzkbd_reset_col(col);
+	}
+
+	spitzkbd_activate_all();
+
+	input_report_key(&spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 );
+	input_report_key(&spitzkbd_data->input, KEY_SUSPEND, pwrkey);
+
+	if (pwrkey && time_after(jiffies, spitzkbd_data->suspend_jiffies + msecs_to_jiffies(1000))) {
+		input_event(&spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1);
+		spitzkbd_data->suspend_jiffies = jiffies;
+	}
+
+	input_sync(&spitzkbd_data->input);
+
+	/* if any keys are pressed, enable the timer */
+	if (num_pressed)
+		mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(100));
+
+	spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
+}
+
+/*
+ * spitz keyboard interrupt handler.
+ */
+static irqreturn_t spitzkbd_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct spitzkbd *spitzkbd_data = dev_id;
+
+	if (!timer_pending(&spitzkbd_data->timer)) {
+		/** wait chattering delay **/
+		udelay(20);
+		spitzkbd_scankeyboard(spitzkbd_data, regs);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * spitz timer checking for released keys
+ */
+static void spitzkbd_timer_callback(unsigned long data)
+{
+	struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
+	spitzkbd_scankeyboard(spitzkbd_data, NULL);
+}
+
+/*
+ * The hinge switches generate an interrupt.
+ * We debounce the switches and pass them to the input system.
+ */
+
+static irqreturn_t spitzkbd_hinge_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct spitzkbd *spitzkbd_data = dev_id;
+
+	if (!timer_pending(&spitzkbd_data->htimer))
+		mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
+
+	return IRQ_HANDLED;
+}
+
+#define HINGE_STABLE_COUNT 2
+static int sharpsl_hinge_state;
+static int hinge_count;
+
+static void spitzkbd_hinge_timer(unsigned long data)
+{
+	struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
+	unsigned long state;
+	unsigned long flags;
+
+	state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB));
+	if (state != sharpsl_hinge_state) {
+		hinge_count = 0;
+		sharpsl_hinge_state = state;
+	} else if (hinge_count < HINGE_STABLE_COUNT) {
+		hinge_count++;
+	}
+
+	if (hinge_count >= HINGE_STABLE_COUNT) {
+		spin_lock_irqsave(&spitzkbd_data->lock, flags);
+
+		input_report_switch(&spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+		input_report_switch(&spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+		input_sync(&spitzkbd_data->input);
+
+		spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
+	} else {
+		mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
+	}
+}
+
+#ifdef CONFIG_PM
+static int spitzkbd_suspend(struct device *dev, pm_message_t state, uint32_t level)
+{
+	if (level == SUSPEND_POWER_DOWN) {
+		int i;
+		struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
+		spitzkbd->suspended = 1;
+
+		/* Set Strobe lines as inputs - *except* strobe line 0 leave this
+		   enabled so we can detect a power button press for resume */
+		for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++)
+			pxa_gpio_mode(spitz_strobes[i] | GPIO_IN);
+	}
+	return 0;
+}
+
+static int spitzkbd_resume(struct device *dev, uint32_t level)
+{
+	if (level == RESUME_POWER_ON) {
+		int i;
+		struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
+
+		for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
+			pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
+
+		/* Upon resume, ignore the suspend key for a short while */
+		spitzkbd->suspend_jiffies = jiffies;
+		spitzkbd->suspended = 0;
+	}
+	return 0;
+}
+#else
+#define spitzkbd_suspend	NULL
+#define spitzkbd_resume		NULL
+#endif
+
+static int __init spitzkbd_probe(struct device *dev)
+{
+	int i;
+	struct spitzkbd *spitzkbd;
+
+	spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL);
+	if (!spitzkbd)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev,spitzkbd);
+	strcpy(spitzkbd->phys, "spitzkbd/input0");
+
+	spin_lock_init(&spitzkbd->lock);
+
+	/* Init Keyboard rescan timer */
+	init_timer(&spitzkbd->timer);
+	spitzkbd->timer.function = spitzkbd_timer_callback;
+	spitzkbd->timer.data = (unsigned long) spitzkbd;
+
+	/* Init Hinge Timer */
+	init_timer(&spitzkbd->htimer);
+	spitzkbd->htimer.function = spitzkbd_hinge_timer;
+	spitzkbd->htimer.data = (unsigned long) spitzkbd;
+
+	spitzkbd->suspend_jiffies=jiffies;
+
+	init_input_dev(&spitzkbd->input);
+	spitzkbd->input.private = spitzkbd;
+	spitzkbd->input.name = "Spitz Keyboard";
+	spitzkbd->input.dev = dev;
+	spitzkbd->input.phys = spitzkbd->phys;
+	spitzkbd->input.id.bustype = BUS_HOST;
+	spitzkbd->input.id.vendor = 0x0001;
+	spitzkbd->input.id.product = 0x0001;
+	spitzkbd->input.id.version = 0x0100;
+	spitzkbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
+	spitzkbd->input.keycode = spitzkbd->keycode;
+	spitzkbd->input.keycodesize = sizeof(unsigned char);
+	spitzkbd->input.keycodemax = ARRAY_SIZE(spitzkbd_keycode);
+
+	memcpy(spitzkbd->keycode, spitzkbd_keycode, sizeof(spitzkbd->keycode));
+	for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
+		set_bit(spitzkbd->keycode[i], spitzkbd->input.keybit);
+	clear_bit(0, spitzkbd->input.keybit);
+	set_bit(SW_0, spitzkbd->input.swbit);
+	set_bit(SW_1, spitzkbd->input.swbit);
+
+	input_register_device(&spitzkbd->input);
+	mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
+
+	/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
+	for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) {
+		pxa_gpio_mode(spitz_senses[i] | GPIO_IN);
+		if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt,
+						SA_INTERRUPT, "Spitzkbd Sense", spitzkbd))
+			printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i);
+		else
+			set_irq_type(IRQ_GPIO(spitz_senses[i]),IRQT_RISING);
+	}
+
+	/* Set Strobe lines as outputs - set high */
+	for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
+		pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
+
+	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
+	pxa_gpio_mode(SPITZ_GPIO_ON_KEY | GPIO_IN);
+	pxa_gpio_mode(SPITZ_GPIO_SWA | GPIO_IN);
+	pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN);
+
+	request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt, SA_INTERRUPT, "Spitzkbd Sync", spitzkbd);
+	request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt, SA_INTERRUPT, "Spitzkbd PwrOn", spitzkbd);
+	request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr, SA_INTERRUPT, "Spitzkbd SWA", spitzkbd);
+	request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr, SA_INTERRUPT, "Spitzkbd SWB", spitzkbd);
+
+	set_irq_type(SPITZ_IRQ_GPIO_SYNC, IRQT_BOTHEDGE);
+	set_irq_type(SPITZ_IRQ_GPIO_ON_KEY, IRQT_BOTHEDGE);
+	set_irq_type(SPITZ_IRQ_GPIO_SWA, IRQT_BOTHEDGE);
+	set_irq_type(SPITZ_IRQ_GPIO_SWB, IRQT_BOTHEDGE);
+
+	printk(KERN_INFO "input: Spitz Keyboard Registered\n");
+
+	return 0;
+}
+
+static int spitzkbd_remove(struct device *dev)
+{
+	int i;
+	struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
+
+	for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++)
+		free_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd);
+
+	free_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd);
+	free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
+	free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
+	free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
+
+	del_timer_sync(&spitzkbd->htimer);
+	del_timer_sync(&spitzkbd->timer);
+
+	input_unregister_device(&spitzkbd->input);
+
+	kfree(spitzkbd);
+
+	return 0;
+}
+
+static struct device_driver spitzkbd_driver = {
+	.name		= "spitz-keyboard",
+	.bus		= &platform_bus_type,
+	.probe		= spitzkbd_probe,
+	.remove		= spitzkbd_remove,
+	.suspend	= spitzkbd_suspend,
+	.resume		= spitzkbd_resume,
+};
+
+static int __devinit spitzkbd_init(void)
+{
+	return driver_register(&spitzkbd_driver);
+}
+
+static void __exit spitzkbd_exit(void)
+{
+	driver_unregister(&spitzkbd_driver);
+}
+
+module_init(spitzkbd_init);
+module_exit(spitzkbd_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
+MODULE_DESCRIPTION("Spitz Keyboard Driver");
+MODULE_LICENSE("GPLv2");