Merge branch 'powerpc-next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc

100 files changed, 4274 insertions, 2532 deletions

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 528b4822f45..4cc780024e6 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1645,8 +1645,7 @@ platforms are moved over to use the flattened-device-tree model.
    - device_type : should be "network", "hldc", "uart", "transparent"
      "bisync", "atm", or "serial".
    - compatible : could be "ucc_geth" or "fsl_atm" and so on.
-   - model : should be "UCC".
-   - device-id : the ucc number(1-8), corresponding to UCCx in UM.
+   - cell-index : the ucc number(1-8), corresponding to UCCx in UM.
    - reg : Offset and length of the register set for the device
    - interrupts : <a b> where a is the interrupt number and b is a
      field that represents an encoding of the sense and level
@@ -1699,8 +1698,7 @@ platforms are moved over to use the flattened-device-tree model.
 	ucc@2000 {
 		device_type = "network";
 		compatible = "ucc_geth";
-		model = "UCC";
-		device-id = <1>;
+		cell-index = <1>;
 		reg = <2000 200>;
 		interrupts = <a0 0>;
 		interrupt-parent = <700>;
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d1fe425cfb5..7f2f126d1c2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -520,6 +520,11 @@ config FSL_PCI
 config 4xx_SOC
 	bool
 
+config FSL_LBC
+	bool
+	help
+	  Freescale Localbus support
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index db7cc34c24d..a86d8d85321 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -269,7 +269,7 @@ config PPC_EARLY_DEBUG_CPM_ADDR
 	hex "CPM UART early debug transmit descriptor address"
 	depends on PPC_EARLY_DEBUG_CPM
 	default "0xfa202008" if PPC_EP88XC
-	default "0xf0000008" if CPM2
+	default "0xf0001ff8" if CPM2
 	default "0xff002008" if CPM1
 	help
 	  This specifies the address of the transmit descriptor
diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c
index 28296facb2a..19dc15abe43 100644
--- a/arch/powerpc/boot/cpm-serial.c
+++ b/arch/powerpc/boot/cpm-serial.c
@@ -11,6 +11,7 @@
 #include "types.h"
 #include "io.h"
 #include "ops.h"
+#include "page.h"
 
 struct cpm_scc {
 	u32 gsmrl;
@@ -42,6 +43,22 @@ struct cpm_param {
 	u16 tbase;
 	u8 rfcr;
 	u8 tfcr;
+	u16 mrblr;
+	u32 rstate;
+	u8 res1[4];
+	u16 rbptr;
+	u8 res2[6];
+	u32 tstate;
+	u8 res3[4];
+	u16 tbptr;
+	u8 res4[6];
+	u16 maxidl;
+	u16 idlc;
+	u16 brkln;
+	u16 brkec;
+	u16 brkcr;
+	u16 rmask;
+	u8 res5[4];
 };
 
 struct cpm_bd {
@@ -54,10 +71,10 @@ static void *cpcr;
 static struct cpm_param *param;
 static struct cpm_smc *smc;
 static struct cpm_scc *scc;
-struct cpm_bd *tbdf, *rbdf;
+static struct cpm_bd *tbdf, *rbdf;
 static u32 cpm_cmd;
-static u8 *muram_start;
-static u32 muram_offset;
+static void *cbd_addr;
+static u32 cbd_offset;
 
 static void (*do_cmd)(int op);
 static void (*enable_port)(void);
@@ -119,20 +136,25 @@ static int cpm_serial_open(void)
 
 	out_8(&param->rfcr, 0x10);
 	out_8(&param->tfcr, 0x10);
-
-	rbdf = (struct cpm_bd *)muram_start;
-	rbdf->addr = (u8 *)(rbdf + 2);
+	out_be16(&param->mrblr, 1);
+	out_be16(&param->maxidl, 0);
+	out_be16(&param->brkec, 0);
+	out_be16(&param->brkln, 0);
+	out_be16(&param->brkcr, 0);
+
+	rbdf = cbd_addr;
+	rbdf->addr = (u8 *)rbdf - 1;
 	rbdf->sc = 0xa000;
 	rbdf->len = 1;
 
 	tbdf = rbdf + 1;
-	tbdf->addr = (u8 *)(rbdf + 2) + 1;
+	tbdf->addr = (u8 *)rbdf - 2;
 	tbdf->sc = 0x2000;
 	tbdf->len = 1;
 
 	sync();
-	out_be16(&param->rbase, muram_offset);
-	out_be16(&param->tbase, muram_offset + sizeof(struct cpm_bd));
+	out_be16(&param->rbase, cbd_offset);
+	out_be16(&param->tbase, cbd_offset + sizeof(struct cpm_bd));
 
 	do_cmd(CPM_CMD_INIT_RX_TX);
 
@@ -175,10 +197,12 @@ static unsigned char cpm_serial_getc(void)
 
 int cpm_console_init(void *devp, struct serial_console_data *scdp)
 {
-	void *reg_virt[2];
-	int is_smc = 0, is_cpm2 = 0, n;
-	unsigned long reg_phys;
+	void *vreg[2];
+	u32 reg[2];
+	int is_smc = 0, is_cpm2 = 0;
 	void *parent, *muram;
+	void *muram_addr;
+	unsigned long muram_offset, muram_size;
 
 	if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) {
 		is_smc = 1;
@@ -202,63 +226,64 @@ int cpm_console_init(void *devp, struct serial_console_data *scdp)
 	else
 		do_cmd = cpm1_cmd;
 
-	n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4);
-	if (n < 4)
+	if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4)
 		return -1;
 
-	n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt));
-	if (n < (int)sizeof(reg_virt)) {
-		for (n = 0; n < 2; n++) {
-			if (!dt_xlate_reg(devp, n, &reg_phys, NULL))
-				return -1;
-
-			reg_virt[n] = (void *)reg_phys;
-		}
-	}
+	if (dt_get_virtual_reg(devp, vreg, 2) < 2)
+		return -1;
 
 	if (is_smc)
-		smc = reg_virt[0];
+		smc = vreg[0];
 	else
-		scc = reg_virt[0];
+		scc = vreg[0];
 
-	param = reg_virt[1];
+	param = vreg[1];
 
 	parent = get_parent(devp);
 	if (!parent)
 		return -1;
 
-	n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt));
-	if (n < (int)sizeof(reg_virt)) {
-		if (!dt_xlate_reg(parent, 0, &reg_phys, NULL))
-			return -1;
-
-		reg_virt[0] = (void *)reg_phys;
-	}
-
-	cpcr = reg_virt[0];
+	if (dt_get_virtual_reg(parent, &cpcr, 1) < 1)
+		return -1;
 
 	muram = finddevice("/soc/cpm/muram/data");
 	if (!muram)
 		return -1;
 
 	/* For bootwrapper-compatible device trees, we assume that the first
-	 * entry has at least 18 bytes, and that #address-cells/#data-cells
+	 * entry has at least 128 bytes, and that #address-cells/#data-cells
 	 * is one for both parent and child.
 	 */
 
-	n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt));
-	if (n < (int)sizeof(reg_virt)) {
-		if (!dt_xlate_reg(muram, 0, &reg_phys, NULL))
-			return -1;
+	if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1)
+		return -1;
 
-		reg_virt[0] = (void *)reg_phys;
-	}
+	if (getprop(muram, "reg", reg, 8) < 8)
+		return -1;
 
-	muram_start = reg_virt[0];
+	muram_offset = reg[0];
+	muram_size = reg[1];
 
-	n = getprop(muram, "reg", &muram_offset, 4);
-	if (n < 4)
-		return -1;
+	/* Store the buffer descriptors at the end of the first muram chunk.
+	 * For SMC ports on CPM2-based platforms, relocate the parameter RAM
+	 * just before the buffer descriptors.
+	 */
+
+	cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd);
+
+	if (is_cpm2 && is_smc) {
+		u16 *smc_base = (u16 *)param;
+		u16 pram_offset;
+
+		pram_offset = cbd_offset - 64;
+		pram_offset = _ALIGN_DOWN(pram_offset, 64);
+
+		disable_port();
+		out_be16(smc_base, pram_offset);
+		param = muram_addr - muram_offset + pram_offset;
+	}
+
+	cbd_addr = muram_addr - muram_offset + cbd_offset;
 
 	scdp->open = cpm_serial_open;
 	scdp->putc = cpm_serial_putc;
diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c
index f56ac6cae9f..9c7d1342829 100644
--- a/arch/powerpc/boot/cuboot-pq2.c
+++ b/arch/powerpc/boot/cuboot-pq2.c
@@ -128,7 +128,7 @@ static void fixup_pci(void)
 	u8 *soc_regs;
 	int i, len;
 	void *node, *parent_node;
-	u32 naddr, nsize, mem_log2;
+	u32 naddr, nsize, mem_pow2, mem_mask;
 
 	node = finddevice("/pci");
 	if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
@@ -141,7 +141,7 @@ static void fixup_pci(void)
 
 	soc_regs = (u8 *)fsl_get_immr();
 	if (!soc_regs)
-		goto err;
+		goto unhandled;
 
 	dt_get_reg_format(node, &naddr, &nsize);
 	if (naddr != 3 || nsize != 2)
@@ -153,7 +153,7 @@ static void fixup_pci(void)
 
 	dt_get_reg_format(parent_node, &naddr, &nsize);
 	if (naddr != 1 || nsize != 1)
-		goto err;
+		goto unhandled;
 
 	len = getprop(node, "ranges", pci_ranges_buf,
 	              sizeof(pci_ranges_buf));
@@ -170,14 +170,20 @@ static void fixup_pci(void)
 	}
 
 	if (!mem || !mmio || !io)
-		goto err;
+		goto unhandled;
+	if (mem->size[1] != mmio->size[1])
+		goto unhandled;
+	if (mem->size[1] & (mem->size[1] - 1))
+		goto unhandled;
+	if (io->size[1] & (io->size[1] - 1))
+		goto unhandled;
 
 	if (mem->phys_addr + mem->size[1] == mmio->phys_addr)
 		mem_base = mem;
 	else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr)
 		mem_base = mmio;
 	else
-		goto err;
+		goto unhandled;
 
 	out_be32(&pci_regs[1][0], mem_base->phys_addr | 1);
 	out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1));
@@ -201,8 +207,9 @@ static void fixup_pci(void)
 	out_le32(&pci_regs[0][58], 0);
 	out_le32(&pci_regs[0][60], 0);
 
-	mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
-	out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1));
+	mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
+	mem_mask = ~(mem_pow2 - 1) >> 12;
+	out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask);
 
 	/* If PCI is disabled, drive RST high to enable. */
 	if (!(in_le32(&pci_regs[0][32]) & 1)) {
@@ -228,7 +235,11 @@ static void fixup_pci(void)
 	return;
 
 err:
-	printf("Bad PCI node\r\n");
+	printf("Bad PCI node -- using existing firmware setup.\r\n");
+	return;
+
+unhandled:
+	printf("Unsupported PCI node -- using existing firmware setup.\r\n");
 }
 
 static void pq2_platform_fixups(void)
diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c
index 60f561e307a..5d12336dc36 100644
--- a/arch/powerpc/boot/devtree.c
+++ b/arch/powerpc/boot/devtree.c
@@ -350,3 +350,23 @@ int dt_is_compatible(void *node, const char *compat)
 
 	return 0;
 }
+
+int dt_get_virtual_reg(void *node, void **addr, int nres)
+{
+	unsigned long xaddr;
+	int n;
+
+	n = getprop(node, "virtual-reg", addr, nres * 4);
+	if (n > 0)
+		return n / 4;
+
+	for (n = 0; n < nres; n++) {
+		if (!dt_xlate_reg(node, n, &xaddr, NULL))
+			break;
+
+		addr[n] = (void *)xaddr;
+	}
+
+	return n;
+}
+
diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts
index 5d2fb76a72c..756758fb5b7 100644
--- a/arch/powerpc/boot/dts/ep8248e.dts
+++ b/arch/powerpc/boot/dts/ep8248e.dts
@@ -121,8 +121,7 @@
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x1100 0x1140
-					       0xec0 0x9800 0x800>;
+					reg = <0 0x2000 0x9800 0x800>;
 				};
 			};
 
@@ -138,7 +137,7 @@
 				device_type = "serial";
 				compatible = "fsl,mpc8248-smc-uart",
 				             "fsl,cpm2-smc-uart";
-				reg = <0x11a80 0x20 0x1100 0x40>;
+				reg = <0x11a80 0x20 0x87fc 2>;
 				interrupts = <4 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <7>;
diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts
index 02705f29979..ae57d624012 100644
--- a/arch/powerpc/boot/dts/ep88xc.dts
+++ b/arch/powerpc/boot/dts/ep88xc.dts
@@ -2,7 +2,7 @@
  * EP88xC Device Tree Source
  *
  * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -10,6 +10,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "EP88xC";
@@ -23,44 +24,44 @@
 
 		PowerPC,885@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <d#16>;
-			i-cache-line-size = <d#16>;
-			d-cache-size = <d#8192>;
-			i-cache-size = <d#8192>;
+			reg = <0x0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
-			interrupts = <f 2>;	// decrementer interrupt
+			interrupts = <15 2>;	// decrementer interrupt
 			interrupt-parent = <&PIC>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x0 0x0>;
 	};
 
 	localbus@fa200100 {
 		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <fa200100 40>;
+		reg = <0xfa200100 0x40>;
 
 		ranges = <
-			0 0 fc000000 04000000
-			3 0 fa000000 01000000
+			0x0 0x0 0xfc000000 0x4000000
+			0x3 0x0 0xfa000000 0x1000000
 		>;
 
 		flash@0,2000000 {
 			compatible = "cfi-flash";
-			reg = <0 2000000 2000000>;
+			reg = <0x0 0x2000000 0x2000000>;
 			bank-width = <4>;
 			device-width = <2>;
 		};
 
 		board-control@3,400000 {
-			reg = <3 400000 10>;
+			reg = <0x3 0x400000 0x10>;
 			compatible = "fsl,ep88xc-bcsr";
 		};
 	};
@@ -70,25 +71,25 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 fa200000 00004000>;
+		ranges = <0x0 0xfa200000 0x4000>;
 		bus-frequency = <0>;
 
 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <fa200000 4000>;
+		reg = <0xfa200000 0x4000>;
 
 		mdio@e00 {
 			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			PHY0: ethernet-phy@0 {
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY1: ethernet-phy@1 {
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -97,7 +98,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc885-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <3 1>;
 			interrupt-parent = <&PIC>;
@@ -109,7 +110,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc885-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <1e00 188>;
+			reg = <0x1e00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <7 1>;
 			interrupt-parent = <&PIC>;
@@ -120,7 +121,7 @@
 		PIC: interrupt-controller@0 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0 24>;
+			reg = <0x0 0x24>;
 			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
 		};
 
@@ -130,29 +131,29 @@
 			#size-cells = <2>;
 			compatible = "fsl,pq-pcmcia";
 			device_type = "pcmcia";
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			interrupt-parent = <&PIC>;
-			interrupts = <d 1>;
+			interrupts = <13 1>;
 		};
 
 		cpm@9c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
-			command-proc = <9c0>;
+			command-proc = <0x9c0>;
 			interrupts = <0>;	// cpm error interrupt
 			interrupt-parent = <&CPM_PIC>;
-			reg = <9c0 40>;
+			reg = <0x9c0 0x40>;
 			ranges;
 
 			muram@2000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 2000 2000>;
+				ranges = <0x0 0x2000 0x2000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 1c00>;
+					reg = <0x0 0x1c00>;
 				};
 			};
 
@@ -160,7 +161,7 @@
 				compatible = "fsl,mpc885-brg",
 				             "fsl,cpm1-brg",
 				             "fsl,cpm-brg";
-				reg = <9f0 10>;
+				reg = <0x9f0 0x10>;
 			};
 
 			CPM_PIC: interrupt-controller@930 {
@@ -168,7 +169,7 @@
 				#interrupt-cells = <1>;
 				interrupts = <5 2 0 2>;
 				interrupt-parent = <&PIC>;
-				reg = <930 20>;
+				reg = <0x930 0x20>;
 				compatible = "fsl,mpc885-cpm-pic",
 				             "fsl,cpm1-pic";
 			};
@@ -178,11 +179,11 @@
 				device_type = "serial";
 				compatible = "fsl,mpc885-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a80 10 3e80 40>;
+				reg = <0xa80 0x10 0x3e80 0x40>;
 				interrupts = <4>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0090>;
+				fsl,cpm-command = <0x90>;
 				linux,planetcore-label = "SMC1";
 			};
 
@@ -191,11 +192,11 @@
 				device_type = "serial";
 				compatible = "fsl,mpc885-scc-uart",
 				             "fsl,cpm1-scc-uart";
-				reg = <a20 20 3d00 80>;
-				interrupts = <1d>;
+				reg = <0xa20 0x20 0x3d00 0x80>;
+				interrupts = <29>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0040>;
+				fsl,cpm-command = <0x40>;
 				linux,planetcore-label = "SCC2";
 			};
 
@@ -204,9 +205,9 @@
 				#size-cells = <0>;
 				compatible = "fsl,mpc885-usb",
 				             "fsl,cpm1-usb";
-				reg = <a00 18 1c00 80>;
+				reg = <0xa00 0x18 0x1c00 0x80>;
 				interrupt-parent = <&CPM_PIC>;
-				interrupts = <1e>;
+				interrupts = <30>;
 				fsl,cpm-command = <0000>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 44695885451..2e5a1a1812b 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -7,6 +7,7 @@
  * Based on sandpoint.dts
  *
  * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
  *
  * This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
 
  */
 
+/dts-v1/;
+
 / {
 	model = "KuroboxHD";
 	compatible = "linkstation";
@@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ??
 
 		PowerPC,603e { /* Really 8241 */
 			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <bebc200>;	/* Fixed by bootloader */
-			timebase-frequency = <1743000>; /* Fixed by bootloader */
+			reg = <0x0>;
+			clock-frequency = <200000000>;	/* Fixed by bootloader */
+			timebase-frequency = <24391680>; /* Fixed by bootloader */
 			bus-frequency = <0>;		/* Fixed by bootloader */
 			/* Following required by dtc but not used */
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 04000000>;
+		reg = <0x0 0x4000000>;
 	};
 
 	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
@@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ??
 		device_type = "soc";
 		compatible = "mpc10x";
 		store-gathering = <0>; /* 0 == off, !0 == on */
-		reg = <80000000 00100000>;
-		ranges = <80000000 80000000 70000000	/* pci mem space */
-			  fc000000 fc000000 00100000	/* EUMB */
-			  fe000000 fe000000 00c00000	/* pci i/o space */
-			  fec00000 fec00000 00300000	/* pci cfg regs */
-			  fef00000 fef00000 00100000>;	/* pci iack */
+		reg = <0x80000000 0x100000>;
+		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
+			  0xfc000000 0xfc000000 0x100000	/* EUMB */
+			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
+			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
+			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
 
 		i2c@80003000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <80003000 1000>;
+			reg = <0x80003000 0x1000>;
 			interrupts = <5 2>;
 			interrupt-parent = <&mpic>;
 
 			rtc@32 {
 				device_type = "rtc";
 				compatible = "ricoh,rs5c372a";
-				reg = <32>;
+				reg = <0x32>;
 			};
 		};
 
@@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ??
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <80004500 8>;
-			clock-frequency = <5d08d88>;
-			current-speed = <2580>;
+			reg = <0x80004500 0x8>;
+			clock-frequency = <97553800>;
+			current-speed = <9600>;
 			interrupts = <9 0>;
 			interrupt-parent = <&mpic>;
 		};
@@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ??
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <80004600 8>;
-			clock-frequency = <5d08d88>;
-			current-speed = <e100>;
-			interrupts = <a 0>;
+			reg = <0x80004600 0x8>;
+			clock-frequency = <97553800>;
+			current-speed = <57600>;
+			interrupts = <10 0>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ??
 			device_type = "open-pic";
 			compatible = "chrp,open-pic";
 			interrupt-controller;
-			reg = <80040000 40000>;
+			reg = <0x80040000 0x40000>;
 		};
 
 		pci0: pci@fec00000 {
@@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ??
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			compatible = "mpc10x-pci";
-			reg = <fec00000 400000>;
-			ranges = <01000000 0        0 fe000000 0 00c00000
-				  02000000 0 80000000 80000000 0 70000000>;
-			bus-range = <0 ff>;
-			clock-frequency = <7f28155>;
+			reg = <0xfec00000 0x400000>;
+			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
+				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+			bus-range = <0 255>;
+			clock-frequency = <133333333>;
 			interrupt-parent = <&mpic>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 11 - IRQ0 ETH */
-				5800 0 0 1 &mpic 0 1
-				5800 0 0 2 &mpic 1 1
-				5800 0 0 3 &mpic 2 1
-				5800 0 0 4 &mpic 3 1
+				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
 				/* IDSEL 12 - IRQ1 IDE0 */
-				6000 0 0 1 &mpic 1 1
-				6000 0 0 2 &mpic 2 1
-				6000 0 0 3 &mpic 3 1
-				6000 0 0 4 &mpic 0 1
+				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
 				/* IDSEL 14 - IRQ3 USB2.0 */
-				7000 0 0 1 &mpic 3 1
-				7000 0 0 2 &mpic 3 1
-				7000 0 0 3 &mpic 3 1
-				7000 0 0 4 &mpic 3 1
+				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index 8443c85b7b3..e4916e69ad3 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -7,6 +7,7 @@
  * Based on sandpoint.dts
  *
  * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
  *
  * This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
 
  */
 
+/dts-v1/;
+
 / {
 	model = "KuroboxHG";
 	compatible = "linkstation";
@@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ??
 
 		PowerPC,603e { /* Really 8241 */
 			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <fdad680>;	/* Fixed by bootloader */
-			timebase-frequency = <1F04000>; /* Fixed by bootloader */
+			reg = <0x0>;
+			clock-frequency = <266000000>;	/* Fixed by bootloader */
+			timebase-frequency = <32522240>; /* Fixed by bootloader */
 			bus-frequency = <0>;		/* Fixed by bootloader */
 			/* Following required by dtc but not used */
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;
+		reg = <0x0 0x8000000>;
 	};
 
 	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
@@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ??
 		device_type = "soc";
 		compatible = "mpc10x";
 		store-gathering = <0>; /* 0 == off, !0 == on */
-		reg = <80000000 00100000>;
-		ranges = <80000000 80000000 70000000	/* pci mem space */
-			  fc000000 fc000000 00100000	/* EUMB */
-			  fe000000 fe000000 00c00000	/* pci i/o space */
-			  fec00000 fec00000 00300000	/* pci cfg regs */
-			  fef00000 fef00000 00100000>;	/* pci iack */
+		reg = <0x80000000 0x100000>;
+		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
+			  0xfc000000 0xfc000000 0x100000	/* EUMB */
+			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
+			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
+			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
 
 		i2c@80003000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <80003000 1000>;
+			reg = <0x80003000 0x1000>;
 			interrupts = <5 2>;
 			interrupt-parent = <&mpic>;
 
 			rtc@32 {
 				device_type = "rtc";
 				compatible = "ricoh,rs5c372a";
-				reg = <32>;
+				reg = <0x32>;
 			};
 		};
 
@@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ??
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <80004500 8>;
-			clock-frequency = <7c044a8>;
-			current-speed = <2580>;
+			reg = <0x80004500 0x8>;
+			clock-frequency = <130041000>;
+			current-speed = <9600>;
 			interrupts = <9 0>;
 			interrupt-parent = <&mpic>;
 		};
@@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ??
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <80004600 8>;
-			clock-frequency = <7c044a8>;
-			current-speed = <e100>;
-			interrupts = <a 0>;
+			reg = <0x80004600 0x8>;
+			clock-frequency = <130041000>;
+			current-speed = <57600>;
+			interrupts = <10 0>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ??
 			device_type = "open-pic";
 			compatible = "chrp,open-pic";
 			interrupt-controller;
-			reg = <80040000 40000>;
+			reg = <0x80040000 0x40000>;
 		};
 
 		pci0: pci@fec00000 {
@@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ??
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			compatible = "mpc10x-pci";
-			reg = <fec00000 400000>;
-			ranges = <01000000 0        0 fe000000 0 00c00000
-				  02000000 0 80000000 80000000 0 70000000>;
-			bus-range = <0 ff>;
-			clock-frequency = <7f28155>;
+			reg = <0xfec00000 0x400000>;
+			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
+				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+			bus-range = <0 255>;
+			clock-frequency = <133333333>;
 			interrupt-parent = <&mpic>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 11 - IRQ0 ETH */
-				5800 0 0 1 &mpic 0 1
-				5800 0 0 2 &mpic 1 1
-				5800 0 0 3 &mpic 2 1
-				5800 0 0 4 &mpic 3 1
+				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
 				/* IDSEL 12 - IRQ1 IDE0 */
-				6000 0 0 1 &mpic 1 1
-				6000 0 0 2 &mpic 2 1
-				6000 0 0 3 &mpic 3 1
-				6000 0 0 4 &mpic 0 1
+				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
 				/* IDSEL 14 - IRQ3 USB2.0 */
-				7000 0 0 1 &mpic 3 1
-				7000 0 0 2 &mpic 3 1
-				7000 0 0 3 &mpic 3 1
-				7000 0 0 4 &mpic 3 1
+				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 8fb54238743..4936349b87c 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -1,7 +1,7 @@
 /*
  * MPC7448HPC2 (Taiga) board Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  * 2006 Roy Zang <Roy Zang at freescale.com>.
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -10,6 +10,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "mpc7448hpc2";
@@ -23,11 +24,11 @@
 				
 		PowerPC,7448@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K bytes
-			i-cache-size = <8000>;		// L1, 32K bytes
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K bytes
+			i-cache-size = <0x8000>;		// L1, 32K bytes
 			timebase-frequency = <0>;	// 33 MHz, from uboot
 			clock-frequency = <0>;		// From U-Boot
 			bus-frequency = <0>;		// From U-Boot
@@ -36,7 +37,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 20000000	// DDR2   512M at 0
+		reg = <0x0 0x20000000	// DDR2   512M at 0
 		       >;
 	};
 
@@ -44,14 +45,14 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "tsi-bridge";
-		ranges = <00000000 c0000000 00010000>;
-		reg = <c0000000 00010000>;
+		ranges = <0x0 0xc0000000 0x10000>;
+		reg = <0xc0000000 0x10000>;
 		bus-frequency = <0>;
 
 		i2c@7000 {
 			interrupt-parent = <&mpic>;
-			interrupts = <E 0>;
-			reg = <7000 400>;
+			interrupts = <14 0>;
+			reg = <0x7000 0x400>;
 			device_type = "i2c";
 			compatible  = "tsi108-i2c";
 		};
@@ -59,20 +60,20 @@
 		MDIO: mdio@6000 {
 			device_type = "mdio";
 			compatible = "tsi108-mdio";
-			reg = <6000 50>;
+			reg = <0x6000 0x50>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			phy8: ethernet-phy@8 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <8>;
+				reg = <0x8>;
 			};
 
 			phy9: ethernet-phy@9 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <9>;
+				reg = <0x9>;
 			};
 
 		};
@@ -82,9 +83,9 @@
 			#size-cells = <0>;
 			device_type = "network";
 			compatible = "tsi108-ethernet";
-			reg = <6000 200>;
+			reg = <0x6000 0x200>;
 			address = [ 00 06 D2 00 00 01 ];
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 			interrupt-parent = <&mpic>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&phy8>;
@@ -96,9 +97,9 @@
 			#size-cells = <0>;
 			device_type = "network";
 			compatible = "tsi108-ethernet";
-			reg = <6400 200>;
+			reg = <0x6400 0x200>;
 			address = [ 00 06 D2 00 00 02 ];
-			interrupts = <11 2>;
+			interrupts = <17 2>;
 			interrupt-parent = <&mpic>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&phy9>;
@@ -107,18 +108,18 @@
 		serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7808 200>;
-			clock-frequency = <3f6b5a00>;
-			interrupts = <c 0>;
+			reg = <0x7808 0x200>;
+			clock-frequency = <1064000000>;
+			interrupts = <12 0>;
 			interrupt-parent = <&mpic>;
 		};
 
 		serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7c08 200>;
-			clock-frequency = <3f6b5a00>;
-			interrupts = <d 0>;
+			reg = <0x7c08 0x200>;
+			clock-frequency = <1064000000>;
+			interrupts = <13 0>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -127,7 +128,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <7400 400>;
+			reg = <0x7400 0x400>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                        	big-endian;
@@ -138,39 +139,39 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <1000 1000>;
+			reg = <0x1000 0x1000>;
 			bus-range = <0 0>;
-			ranges = <02000000 0 e0000000 e0000000 0 1A000000	
-				  01000000 0 00000000 fa000000 0 00010000>;
-			clock-frequency = <7f28154>;
+			ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000	
+				  0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
+			clock-frequency = <133333332>;
 			interrupt-parent = <&mpic>;
-			interrupts = <17 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupts = <23 2>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 
 				/* IDSEL 0x11 */
-				0800 0 0 1 &RT0 24 0
-				0800 0 0 2 &RT0 25 0
-				0800 0 0 3 &RT0 26 0
-				0800 0 0 4 &RT0 27 0
+				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
 
 				/* IDSEL 0x12 */
-				1000 0 0 1 &RT0 25 0
-				1000 0 0 2 &RT0 26 0
-				1000 0 0 3 &RT0 27 0
-				1000 0 0 4 &RT0 24 0
+				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
 
 				/* IDSEL 0x13 */
-				1800 0 0 1 &RT0 26 0
-				1800 0 0 2 &RT0 27 0
-				1800 0 0 3 &RT0 24 0
-				1800 0 0 4 &RT0 25 0
+				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
 
 				/* IDSEL 0x14 */
-				2000 0 0 1 &RT0 27 0
-				2000 0 0 2 &RT0 24 0
-				2000 0 0 3 &RT0 25 0
-				2000 0 0 4 &RT0 26 0
+				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
 				>;
 
 			RT0: router@1180 {
@@ -180,7 +181,7 @@
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
 				big-endian;
-				interrupts = <17 2>;
+				interrupts = <23 2>;
 				interrupt-parent = <&mpic>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 7285ca1325f..46e2da30c3d 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8272 ADS Device Tree Source
  *
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005,2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,8 @@
  * option) any later version.
  */
 
+/dts-v1/;
+
 / {
 	model = "MPC8272ADS";
 	compatible = "fsl,mpc8272ads";
@@ -21,11 +23,11 @@
 
 		PowerPC,8272@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <d#32>;
-			i-cache-line-size = <d#32>;
-			d-cache-size = <d#16384>;
-			i-cache-size = <d#16384>;
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -34,7 +36,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x0 0x0>;
 	};
 
 	localbus@f0010100 {
@@ -42,21 +44,21 @@
 		             "fsl,pq2-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <f0010100 40>;
+		reg = <0xf0010100 0x40>;
 
-		ranges = <0 0 fe000000 02000000
-		          1 0 f4500000 00008000
-		          3 0 f8200000 00008000>;
+		ranges = <0x0 0x0 0xfe000000 0x2000000
+		          0x1 0x0 0xf4500000 0x8000
+		          0x3 0x0 0xf8200000 0x8000>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0 0 2000000>;
+			reg = <0x0 0x0 0x2000000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
 
 		board-control@1,0 {
-			reg = <1 0 20>;
+			reg = <0x1 0x0 0x20>;
 			compatible = "fsl,mpc8272ads-bcsr";
 		};
 
@@ -65,46 +67,46 @@
 			             "fsl,pq2ads-pci-pic";
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			reg = <3 0 8>;
+			reg = <0x3 0x0 0x8>;
 			interrupt-parent = <&PIC>;
-			interrupts = <14 8>;
+			interrupts = <20 8>;
 		};
 	};
 
 
 	pci@f0010800 {
 		device_type = "pci";
-		reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
 		compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		clock-frequency = <d#66666666>;
-		interrupt-map-mask = <f800 0 0 7>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 		                 /* IDSEL 0x16 */
-		                 b000 0 0 1 &PCI_PIC 0
-		                 b000 0 0 2 &PCI_PIC 1
-		                 b000 0 0 3 &PCI_PIC 2
-		                 b000 0 0 4 &PCI_PIC 3
+		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
 
 		                 /* IDSEL 0x17 */
-		                 b800 0 0 1 &PCI_PIC 4
-		                 b800 0 0 2 &PCI_PIC 5
-		                 b800 0 0 3 &PCI_PIC 6
-		                 b800 0 0 4 &PCI_PIC 7
+		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
 
 		                 /* IDSEL 0x18 */
-		                 c000 0 0 1 &PCI_PIC 8
-		                 c000 0 0 2 &PCI_PIC 9
-		                 c000 0 0 3 &PCI_PIC a
-		                 c000 0 0 4 &PCI_PIC b>;
+		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
 
 		interrupt-parent = <&PIC>;
-		interrupts = <12 8>;
-		ranges = <42000000 0 80000000 80000000 0 20000000
-		          02000000 0 a0000000 a0000000 0 20000000
-		          01000000 0 00000000 f6000000 0 02000000>;
+		interrupts = <18 8>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
 	};
 
 	soc@f0000000 {
@@ -112,26 +114,26 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "fsl,mpc8272", "fsl,pq2-soc";
-		ranges = <00000000 f0000000 00053000>;
+		ranges = <0x0 0xf0000000 0x53000>;
 
 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <f0000000 00053000>;
+		reg = <0xf0000000 0x53000>;
 
 		cpm@119c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
-			reg = <119c0 30>;
+			reg = <0x119c0 0x30>;
 			ranges;
 
 			muram@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 0 10000>;
+				ranges = <0x0 0x0 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 2000 9800 800>;
+					reg = <0x0 0x2000 0x9800 0x800>;
 				};
 			};
 
@@ -139,29 +141,29 @@
 				compatible = "fsl,mpc8272-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <119f0 10 115f0 10>;
+				reg = <0x119f0 0x10 0x115f0 0x10>;
 			};
 
 			serial@11a00 {
 				device_type = "serial";
 				compatible = "fsl,mpc8272-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <11a00 20 8000 100>;
-				interrupts = <28 8>;
+				reg = <0x11a00 0x20 0x8000 0x100>;
+				interrupts = <40 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <00800000>;
+				fsl,cpm-command = <0x800000>;
 			};
 
 			serial@11a60 {
 				device_type = "serial";
 				compatible = "fsl,mpc8272-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <11a60 20 8300 100>;
-				interrupts = <2b 8>;
+				reg = <0x11a60 0x20 0x8300 0x100>;
+				interrupts = <43 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <4>;
-				fsl,cpm-command = <0ce00000>;
+				fsl,cpm-command = <0xce00000>;
 			};
 
 			mdio@10d40 {
@@ -169,23 +171,23 @@
 				compatible = "fsl,mpc8272ads-mdio-bitbang",
 				             "fsl,mpc8272-mdio-bitbang",
 				             "fsl,cpm2-mdio-bitbang";
-				reg = <10d40 14>;
+				reg = <0x10d40 0x14>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				fsl,mdio-pin = <12>;
-				fsl,mdc-pin = <13>;
+				fsl,mdio-pin = <18>;
+				fsl,mdc-pin = <19>;
 
 				PHY0: ethernet-phy@0 {
 					interrupt-parent = <&PIC>;
-					interrupts = <17 8>;
-					reg = <0>;
+					interrupts = <23 8>;
+					reg = <0x0>;
 					device_type = "ethernet-phy";
 				};
 
 				PHY1: ethernet-phy@1 {
 					interrupt-parent = <&PIC>;
-					interrupts = <17 8>;
-					reg = <3>;
+					interrupts = <23 8>;
+					reg = <0x3>;
 					device_type = "ethernet-phy";
 				};
 			};
@@ -194,33 +196,33 @@
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <11300 20 8400 100 11390 1>;
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <20 8>;
+				interrupts = <32 8>;
 				interrupt-parent = <&PIC>;
 				phy-handle = <&PHY0>;
 				linux,network-index = <0>;
-				fsl,cpm-command = <12000300>;
+				fsl,cpm-command = <0x12000300>;
 			};
 
 			ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <11320 20 8500 100 113b0 1>;
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <21 8>;
+				interrupts = <33 8>;
 				interrupt-parent = <&PIC>;
 				phy-handle = <&PHY1>;
 				linux,network-index = <1>;
-				fsl,cpm-command = <16200300>;
+				fsl,cpm-command = <0x16200300>;
 			};
 		};
 
 		PIC: interrupt-controller@10c00 {
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			reg = <10c00 80>;
+			reg = <0x10c00 0x80>;
 			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
 		};
 
@@ -232,14 +234,14 @@
 			             "fsl,talitos-sec2",
 			             "fsl,talitos",
 			             "talitos";
-			reg = <30000 10000>;
-			interrupts = <b 8>;
+			reg = <0x30000 0x10000>;
+			interrupts = <11 8>;
 			interrupt-parent = <&PIC>;
 			num-channels = <4>;
-			channel-fifo-len = <18>;
-			exec-units-mask = <0000007e>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x7e>;
 /* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <01010ebf>;
+			descriptor-types-mask = <0x1010ebf>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 9bb408371bc..539e02fb352 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -255,9 +255,7 @@
 		enet0: ucc@2200 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <3>;
-			device-id = <3>;
 			reg = <0x2200 0x200>;
 			interrupts = <34>;
 			interrupt-parent = <&qeic>;
@@ -271,9 +269,7 @@
 		enet1: ucc@3200 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <4>;
-			device-id = <4>;
 			reg = <0x3200 0x200>;
 			interrupts = <35>;
 			interrupt-parent = <&qeic>;
@@ -287,8 +283,7 @@
 		ucc@2400 {
 			device_type = "serial";
 			compatible = "ucc_uart";
-			model = "UCC";
-			device-id = <5>;	/* The UCC number, 1-7*/
+			cell-index = <5>;	/* The UCC number, 1-7*/
 			port-number = <0>;	/* Which ttyQEx device */
 			soft-uart;		/* We need Soft-UART */
 			reg = <0x2400 0x200>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 94f93d209de..179c81c6a7a 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -208,9 +208,7 @@
 		enet0: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <2>;
-			device-id = <2>;
 			reg = <0x3000 0x200>;
 			interrupts = <33>;
 			interrupt-parent = <&qeic>;
@@ -224,9 +222,7 @@
 		enet1: ucc@2200 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <3>;
-			device-id = <3>;
 			reg = <0x2200 0x200>;
 			interrupts = <34>;
 			interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 55f03e8dc97..8160ff24e87 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -257,9 +257,7 @@
 		enet0: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <1>;
-			device-id = <1>;
 			reg = <0x2000 0x200>;
 			interrupts = <32>;
 			interrupt-parent = <&qeic>;
@@ -274,9 +272,7 @@
 		enet1: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <2>;
-			device-id = <2>;
 			reg = <0x3000 0x200>;
 			interrupts = <33>;
 			interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 975248491b7..18033ed0b53 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8540 ADS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8540ADS";
@@ -31,11 +32,11 @@
 
 		PowerPC,8540@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -44,31 +45,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8540@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -76,8 +77,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -86,24 +87,24 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <7 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -113,9 +114,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -125,9 +126,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -137,9 +138,9 @@
 			device_type = "network";
 			model = "FEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2>;
+			interrupts = <41 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 		};
@@ -148,9 +149,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>; 	// reg base, size
+			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -158,9 +159,9 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 		mpic: pic@40000 {
@@ -168,7 +169,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 			big-endian;
@@ -177,90 +178,90 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x02 */
-			1000 0 0 1 &mpic 1 1
-			1000 0 0 2 &mpic 2 1
-			1000 0 0 3 &mpic 3 1
-			1000 0 0 4 &mpic 4 1
+			0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 			/* IDSEL 0x03 */
-			1800 0 0 1 &mpic 4 1
-			1800 0 0 2 &mpic 1 1
-			1800 0 0 3 &mpic 2 1
-			1800 0 0 4 &mpic 3 1
+			0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x04 */
-			2000 0 0 1 &mpic 3 1
-			2000 0 0 2 &mpic 4 1
-			2000 0 0 3 &mpic 1 1
-			2000 0 0 4 &mpic 2 1
+			0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x05 */
-			2800 0 0 1 &mpic 2 1
-			2800 0 0 2 &mpic 3 1
-			2800 0 0 3 &mpic 4 1
-			2800 0 0 4 &mpic 1 1
+			0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x0c */
-			6000 0 0 1 &mpic 1 1
-			6000 0 0 2 &mpic 2 1
-			6000 0 0 3 &mpic 3 1
-			6000 0 0 4 &mpic 4 1
+			0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 			/* IDSEL 0x0d */
-			6800 0 0 1 &mpic 4 1
-			6800 0 0 2 &mpic 1 1
-			6800 0 0 3 &mpic 2 1
-			6800 0 0 4 &mpic 3 1
+			0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x0e */
-			7000 0 0 1 &mpic 3 1
-			7000 0 0 2 &mpic 4 1
-			7000 0 0 3 &mpic 1 1
-			7000 0 0 4 &mpic 2 1
+			0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x0f */
-			7800 0 0 1 &mpic 2 1
-			7800 0 0 2 &mpic 3 1
-			7800 0 0 3 &mpic 4 1
-			7800 0 0 4 &mpic 1 1
+			0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x12 */
-			9000 0 0 1 &mpic 1 1
-			9000 0 0 2 &mpic 2 1
-			9000 0 0 3 &mpic 3 1
-			9000 0 0 4 &mpic 4 1
+			0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 			/* IDSEL 0x13 */
-			9800 0 0 1 &mpic 4 1
-			9800 0 0 2 &mpic 1 1
-			9800 0 0 3 &mpic 2 1
-			9800 0 0 4 &mpic 3 1
+			0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x14 */
-			a000 0 0 1 &mpic 3 1
-			a000 0 0 2 &mpic 4 1
-			a000 0 0 3 &mpic 1 1
-			a000 0 0 4 &mpic 2 1
+			0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic 2 1
-			a800 0 0 2 &mpic 3 1
-			a800 0 0 3 &mpic 4 1
-			a800 0 0 4 &mpic 1 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index fa8d9aaad15..663c7c50ca4 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8541 CDS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8541CDS";
@@ -31,11 +32,11 @@
 
 		PowerPC,8541@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -44,31 +45,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8541@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR 1M
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8541-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8541-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -76,8 +77,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -86,18 +87,18 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -107,9 +108,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -119,9 +120,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -130,9 +131,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>; 	// reg base, size
+			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -140,9 +141,9 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -151,7 +152,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
@@ -161,17 +162,17 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
-			reg = <919c0 30>;
+			reg = <0x919c0 0x30>;
 			ranges;
 
 			muram@80000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 80000 10000>;
+				ranges = <0x0 0x80000 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 2000 9000 1000>;
+					reg = <0x0 0x2000 0x9000 0x1000>;
 				};
 			};
 
@@ -179,16 +180,16 @@
 				compatible = "fsl,mpc8541-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <919f0 10 915f0 10>;
+				reg = <0x919f0 0x10 0x915f0 0x10>;
 			};
 
 			cpmpic: pic@90c00 {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
-				interrupts = <2e 2>;
+				interrupts = <46 2>;
 				interrupt-parent = <&mpic>;
-				reg = <90c00 80>;
+				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
 			};
 		};
@@ -196,68 +197,68 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <1f800 0 0 7>;
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x10 */
-			08000 0 0 1 &mpic 0 1
-			08000 0 0 2 &mpic 1 1
-			08000 0 0 3 &mpic 2 1
-			08000 0 0 4 &mpic 3 1
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x11 */
-			08800 0 0 1 &mpic 0 1
-			08800 0 0 2 &mpic 1 1
-			08800 0 0 3 &mpic 2 1
-			08800 0 0 4 &mpic 3 1
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x12 (Slot 1) */
-			09000 0 0 1 &mpic 0 1
-			09000 0 0 2 &mpic 1 1
-			09000 0 0 3 &mpic 2 1
-			09000 0 0 4 &mpic 3 1
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x13 (Slot 2) */
-			09800 0 0 1 &mpic 1 1
-			09800 0 0 2 &mpic 2 1
-			09800 0 0 3 &mpic 3 1
-			09800 0 0 4 &mpic 0 1
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x14 (Slot 3) */
-			0a000 0 0 1 &mpic 2 1
-			0a000 0 0 2 &mpic 3 1
-			0a000 0 0 3 &mpic 0 1
-			0a000 0 0 4 &mpic 1 1
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x15 (Slot 4) */
-			0a800 0 0 1 &mpic 3 1
-			0a800 0 0 2 &mpic 0 1
-			0a800 0 0 3 &mpic 1 1
-			0a800 0 0 4 &mpic 2 1
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* Bus 1 (Tundra Bridge) */
 			/* IDSEL 0x12 (ISA bridge) */
-			19000 0 0 1 &mpic 0 1
-			19000 0 0 2 &mpic 1 1
-			19000 0 0 3 &mpic 2 1
-			19000 0 0 4 &mpic 3 1>;
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 
 		i8259@19000 {
 			interrupt-controller;
 			device_type = "interrupt-controller";
-			reg = <19000 0 0 0 1>;
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			compatible = "chrp,iic";
@@ -268,24 +269,24 @@
 
 	pci1: pci@e0009000 {
 		cell-index = <1>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic b 1
-			a800 0 0 2 &mpic b 1
-			a800 0 0 3 &mpic b 1
-			a800 0 0 4 &mpic b 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
+		interrupts = <25 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 e3000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
+		reg = <0xe0009000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 688af9d0638..6a0d8db96d9 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8544 DS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 / {
 	model = "MPC8544DS";
 	compatible = "MPC8544DS", "MPC85xxDS";
@@ -27,17 +28,16 @@
 	};
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		PowerPC,8544@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -46,7 +46,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 00000000>;	// Filled by U-Boot
+		reg = <0x0 0x0>;	// Filled by U-Boot
 	};
 
 	soc8544@e0000000 {
@@ -54,24 +54,24 @@
 		#size-cells = <1>;
 		device_type = "soc";
 
-		ranges = <00000000 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR 1M
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		memory-controller@2000 {
 			compatible = "fsl,8544-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8544-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -79,8 +79,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -90,8 +90,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -100,30 +100,71 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <0>;
+				interrupts = <10 1>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <1>;
+				interrupts = <10 1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8544-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8544-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8544-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8544-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
@@ -134,9 +175,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1f 2 20 2 21 2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
@@ -146,9 +187,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;
+			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -156,15 +197,15 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;
+			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8548-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -173,7 +214,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 			big-endian;
@@ -184,32 +225,32 @@
 		cell-index = <0>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x11 J17 Slot 1 */
-			8800 0 0 1 &mpic 2 1
-			8800 0 0 2 &mpic 3 1
-			8800 0 0 3 &mpic 4 1
-			8800 0 0 4 &mpic 1 1
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x12 J16 Slot 2 */
 
-			9000 0 0 1 &mpic 3 1
-			9000 0 0 2 &mpic 4 1
-			9000 0 0 3 &mpic 2 1
-			9000 0 0 4 &mpic 1 1>;
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 c0000000 c0000000 0 20000000
-			  01000000 0 00000000 e1000000 0 00010000>;
-		clock-frequency = <3f940aa>;
+		interrupts = <24 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 	};
 
 	pci1: pcie@e0009000 {
@@ -219,33 +260,33 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e1010000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xe0009000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
 			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 80000000
-				  02000000 0 80000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00010000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
 		};
 	};
 
@@ -256,33 +297,33 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000a000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 10000000
-			  01000000 0 00000000 e1020000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xe000a000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
 			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 10000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00010000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
 		};
 	};
 
@@ -293,72 +334,72 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000b000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 b0000000 b0000000 0 00100000
-			  01000000 0 00000000 b0100000 0 00100000>;
-		clock-frequency = <1fca055>;
+		reg = <0xe000b000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
+			  0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <1b 2>;
-		interrupt-map-mask = <ff00 0 0 1>;
+		interrupts = <27 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
 		interrupt-map = <
 			// IDSEL 0x1c  USB
-			e000 0 0 1 &i8259 c 2
-			e100 0 0 2 &i8259 9 2
-			e200 0 0 3 &i8259 a 2
-			e300 0 0 4 &i8259 b 2
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
 
 			// IDSEL 0x1d  Audio
-			e800 0 0 1 &i8259 6 2
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
 
 			// IDSEL 0x1e Legacy
-			f000 0 0 1 &i8259 7 2
-			f100 0 0 1 &i8259 7 2
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
 
 			// IDSEL 0x1f IDE/SATA
-			f800 0 0 1 &i8259 e 2
-			f900 0 0 1 &i8259 5 2
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
 		>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 b0000000
-				  02000000 0 b0000000
-				  0 00100000
+			ranges = <0x2000000 0x0 0xb0000000
+				  0x2000000 0x0 0xb0000000
+				  0x0 0x100000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00100000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 
 			uli1575@0 {
-				reg = <0 0 0 0 0>;
+				reg = <0x0 0x0 0x0 0x0 0x0>;
 				#size-cells = <2>;
 				#address-cells = <3>;
-				ranges = <02000000 0 b0000000
-					  02000000 0 b0000000
-					  0 00100000
+				ranges = <0x2000000 0x0 0xb0000000
+					  0x2000000 0x0 0xb0000000
+					  0x0 0x100000
 
-					  01000000 0 00000000
-					  01000000 0 00000000
-					  0 00100000>;
+					  0x1000000 0x0 0x0
+					  0x1000000 0x0 0x0
+					  0x0 0x100000>;
 				isa@1e {
 					device_type = "isa";
 					#interrupt-cells = <2>;
 					#size-cells = <1>;
 					#address-cells = <2>;
-					reg = <f000 0 0 0 0>;
-					ranges = <1 0
-						  01000000 0 0
-						  00001000>;
+					reg = <0xf000 0x0 0x0 0x0 0x0>;
+					ranges = <0x1 0x0
+						  0x1000000 0x0 0x0
+						  0x1000>;
 					interrupt-parent = <&i8259>;
 
 					i8259: interrupt-controller@20 {
-						reg = <1 20 2
-						       1 a0 2
-						       1 4d0 2>;
+						reg = <0x1 0x20 0x2
+						       0x1 0xa0 0x2
+						       0x1 0x4d0 0x2>;
 						interrupt-controller;
 						device_type = "interrupt-controller";
 						#address-cells = <0>;
@@ -371,28 +412,28 @@
 					i8042@60 {
 						#size-cells = <0>;
 						#address-cells = <1>;
-						reg = <1 60 1 1 64 1>;
-						interrupts = <1 3 c 3>;
+						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+						interrupts = <1 3 12 3>;
 						interrupt-parent = <&i8259>;
 
 						keyboard@0 {
-							reg = <0>;
+							reg = <0x0>;
 							compatible = "pnpPNP,303";
 						};
 
 						mouse@1 {
-							reg = <1>;
+							reg = <0x1>;
 							compatible = "pnpPNP,f03";
 						};
 					};
 
 					rtc@70 {
 						compatible = "pnpPNP,b00";
-						reg = <1 70 2>;
+						reg = <0x1 0x70 0x2>;
 					};
 
 					gpio@400 {
-						reg = <1 400 80>;
+						reg = <0x1 0x400 0x80>;
 					};
 				};
 			};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 1f470c6a1c6..fa298a8c81c 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8548 CDS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8548CDS";
@@ -36,11 +37,11 @@
 
 		PowerPC,8548@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -49,31 +50,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8548@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <00000000 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8548-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <80000>;	// L2, 512K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -81,8 +82,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -92,8 +93,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -102,30 +103,30 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -135,9 +136,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -147,9 +148,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -160,9 +161,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1f 2 20 2 21 2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 		};
@@ -172,9 +173,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <27000 1000>;
+			reg = <0x27000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <25 2 26 2 27 2>;
+			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 		};
@@ -184,9 +185,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;	// reg base, size
+			reg = <0x4500 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -194,15 +195,15 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities reg
 			compatible = "fsl,mpc8548-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -211,7 +212,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
@@ -220,139 +221,139 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x4 (PCIX Slot 2) */
-			02000 0 0 1 &mpic 0 1
-			02000 0 0 2 &mpic 1 1
-			02000 0 0 3 &mpic 2 1
-			02000 0 0 4 &mpic 3 1
+			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x5 (PCIX Slot 3) */
-			02800 0 0 1 &mpic 1 1
-			02800 0 0 2 &mpic 2 1
-			02800 0 0 3 &mpic 3 1
-			02800 0 0 4 &mpic 0 1
+			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x6 (PCIX Slot 4) */
-			03000 0 0 1 &mpic 2 1
-			03000 0 0 2 &mpic 3 1
-			03000 0 0 3 &mpic 0 1
-			03000 0 0 4 &mpic 1 1
+			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x8 (PCIX Slot 5) */
-			04000 0 0 1 &mpic 0 1
-			04000 0 0 2 &mpic 1 1
-			04000 0 0 3 &mpic 2 1
-			04000 0 0 4 &mpic 3 1
+			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0xC (Tsi310 bridge) */
-			06000 0 0 1 &mpic 0 1
-			06000 0 0 2 &mpic 1 1
-			06000 0 0 3 &mpic 2 1
-			06000 0 0 4 &mpic 3 1
+			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x14 (Slot 2) */
-			0a000 0 0 1 &mpic 0 1
-			0a000 0 0 2 &mpic 1 1
-			0a000 0 0 3 &mpic 2 1
-			0a000 0 0 4 &mpic 3 1
+			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x15 (Slot 3) */
-			0a800 0 0 1 &mpic 1 1
-			0a800 0 0 2 &mpic 2 1
-			0a800 0 0 3 &mpic 3 1
-			0a800 0 0 4 &mpic 0 1
+			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x16 (Slot 4) */
-			0b000 0 0 1 &mpic 2 1
-			0b000 0 0 2 &mpic 3 1
-			0b000 0 0 3 &mpic 0 1
-			0b000 0 0 4 &mpic 1 1
+			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x18 (Slot 5) */
-			0c000 0 0 1 &mpic 0 1
-			0c000 0 0 2 &mpic 1 1
-			0c000 0 0 3 &mpic 2 1
-			0c000 0 0 4 &mpic 3 1
+			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-			0E000 0 0 1 &mpic 0 1
-			0E000 0 0 2 &mpic 1 1
-			0E000 0 0 3 &mpic 2 1
-			0E000 0 0 4 &mpic 3 1>;
+			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 10000000
-			  01000000 0 00000000 e2000000 0 00800000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 		device_type = "pci";
 
 		pci_bridge@1c {
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 
 				/* IDSEL 0x00 (PrPMC Site) */
-				0000 0 0 1 &mpic 0 1
-				0000 0 0 2 &mpic 1 1
-				0000 0 0 3 &mpic 2 1
-				0000 0 0 4 &mpic 3 1
+				0000 0x0 0x0 0x1 &mpic 0x0 0x1
+				0000 0x0 0x0 0x2 &mpic 0x1 0x1
+				0000 0x0 0x0 0x3 &mpic 0x2 0x1
+				0000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 0x04 (VIA chip) */
-				2000 0 0 1 &mpic 0 1
-				2000 0 0 2 &mpic 1 1
-				2000 0 0 3 &mpic 2 1
-				2000 0 0 4 &mpic 3 1
+				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 0x05 (8139) */
-				2800 0 0 1 &mpic 1 1
+				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
 
 				/* IDSEL 0x06 (Slot 6) */
-				3000 0 0 1 &mpic 2 1
-				3000 0 0 2 &mpic 3 1
-				3000 0 0 3 &mpic 0 1
-				3000 0 0 4 &mpic 1 1
+				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 				/* IDESL 0x07 (Slot 7) */
-				3800 0 0 1 &mpic 3 1
-				3800 0 0 2 &mpic 0 1
-				3800 0 0 3 &mpic 1 1
-				3800 0 0 4 &mpic 2 1>;
+				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
+				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
+				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
 
-			reg = <e000 0 0 0 0>;
+			reg = <0xe000 0x0 0x0 0x0 0x0>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			ranges = <02000000 0 80000000
-				  02000000 0 80000000
-				  0 20000000
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00080000>;
-			clock-frequency = <1fca055>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x80000>;
+			clock-frequency = <33333333>;
 
 			isa@4 {
 				device_type = "isa";
 				#interrupt-cells = <2>;
 				#size-cells = <1>;
 				#address-cells = <2>;
-				reg = <2000 0 0 0 0>;
-				ranges = <1 0 01000000 0 0 00001000>;
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
 				interrupt-parent = <&i8259>;
 
 				i8259: interrupt-controller@20 {
 					interrupt-controller;
 					device_type = "interrupt-controller";
-					reg = <1 20 2
-					       1 a0 2
-					       1 4d0 2>;
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
 					#address-cells = <0>;
 					#interrupt-cells = <2>;
 					compatible = "chrp,iic";
@@ -362,7 +363,7 @@
 
 				rtc@70 {
 					compatible = "pnpPNP,b00";
-					reg = <1 70 2>;
+					reg = <0x1 0x70 0x2>;
 				};
 			};
 		};
@@ -370,64 +371,64 @@
 
 	pci1: pci@e0009000 {
 		cell-index = <1>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic b 1
-			a800 0 0 2 &mpic 1 1
-			a800 0 0 3 &mpic 2 1
-			a800 0 0 4 &mpic 3 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
+		interrupts = <25 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 90000000 90000000 0 10000000
-			  01000000 0 00000000 e2800000 0 00800000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
+		reg = <0xe0009000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
 
 	pci2: pcie@e000a000 {
 		cell-index = <2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x0 (PEX) */
-			00000 0 0 1 &mpic 0 1
-			00000 0 0 2 &mpic 1 1
-			00000 0 0 3 &mpic 2 1
-			00000 0 0 4 &mpic 3 1>;
+			00000 0x0 0x0 0x1 &mpic 0x0 0x1
+			00000 0x0 0x0 0x2 &mpic 0x1 0x1
+			00000 0x0 0x0 0x3 &mpic 0x2 0x1
+			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 e3000000 0 08000000>;
-		clock-frequency = <1fca055>;
+		interrupts = <26 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+		clock-frequency = <33333333>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000a000 1000>;
+		reg = <0xe000a000 0x1000>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 08000000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x8000000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 4538f3c3886..b025c566c10 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8555 CDS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8555CDS";
@@ -31,11 +32,11 @@
 
 		PowerPC,8555@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -44,31 +45,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8555@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR 1M
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8555-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8555-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -76,8 +77,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -86,18 +87,18 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -107,9 +108,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -119,9 +120,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -130,9 +131,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>; 	// reg base, size
+			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -140,9 +141,9 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -151,7 +152,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
@@ -161,17 +162,17 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
-			reg = <919c0 30>;
+			reg = <0x919c0 0x30>;
 			ranges;
 
 			muram@80000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 80000 10000>;
+				ranges = <0x0 0x80000 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 2000 9000 1000>;
+					reg = <0x0 0x2000 0x9000 0x1000>;
 				};
 			};
 
@@ -179,16 +180,16 @@
 				compatible = "fsl,mpc8555-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <919f0 10 915f0 10>;
+				reg = <0x919f0 0x10 0x915f0 0x10>;
 			};
 
 			cpmpic: pic@90c00 {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
-				interrupts = <2e 2>;
+				interrupts = <46 2>;
 				interrupt-parent = <&mpic>;
-				reg = <90c00 80>;
+				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
 			};
 		};
@@ -196,68 +197,68 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <1f800 0 0 7>;
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x10 */
-			08000 0 0 1 &mpic 0 1
-			08000 0 0 2 &mpic 1 1
-			08000 0 0 3 &mpic 2 1
-			08000 0 0 4 &mpic 3 1
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x11 */
-			08800 0 0 1 &mpic 0 1
-			08800 0 0 2 &mpic 1 1
-			08800 0 0 3 &mpic 2 1
-			08800 0 0 4 &mpic 3 1
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x12 (Slot 1) */
-			09000 0 0 1 &mpic 0 1
-			09000 0 0 2 &mpic 1 1
-			09000 0 0 3 &mpic 2 1
-			09000 0 0 4 &mpic 3 1
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x13 (Slot 2) */
-			09800 0 0 1 &mpic 1 1
-			09800 0 0 2 &mpic 2 1
-			09800 0 0 3 &mpic 3 1
-			09800 0 0 4 &mpic 0 1
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x14 (Slot 3) */
-			0a000 0 0 1 &mpic 2 1
-			0a000 0 0 2 &mpic 3 1
-			0a000 0 0 3 &mpic 0 1
-			0a000 0 0 4 &mpic 1 1
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x15 (Slot 4) */
-			0a800 0 0 1 &mpic 3 1
-			0a800 0 0 2 &mpic 0 1
-			0a800 0 0 3 &mpic 1 1
-			0a800 0 0 4 &mpic 2 1
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* Bus 1 (Tundra Bridge) */
 			/* IDSEL 0x12 (ISA bridge) */
-			19000 0 0 1 &mpic 0 1
-			19000 0 0 2 &mpic 1 1
-			19000 0 0 3 &mpic 2 1
-			19000 0 0 4 &mpic 3 1>;
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 
 		i8259@19000 {
 			interrupt-controller;
 			device_type = "interrupt-controller";
-			reg = <19000 0 0 0 1>;
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			compatible = "chrp,iic";
@@ -268,24 +269,24 @@
 
 	pci1: pci@e0009000 {
 		cell-index = <1>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic b 1
-			a800 0 0 2 &mpic b 1
-			a800 0 0 3 &mpic b 1
-			a800 0 0 4 &mpic b 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
+		interrupts = <25 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 e3000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
+		reg = <0xe0009000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 639ce8a709a..0cc16ab305d 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8560 ADS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8560ADS";
@@ -32,74 +33,74 @@
 
 		PowerPC,8560@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
-			timebase-frequency = <04ead9a0>;
-			bus-frequency = <13ab6680>;
-			clock-frequency = <312c8040>;
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <82500000>;
+			bus-frequency = <330000000>;
+			clock-frequency = <825000000>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 10000000>;
+		reg = <0x0 0x10000000>;
 	};
 
 	soc8560@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00000200>;
-		bus-frequency = <13ab6680>;
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x200>;
+		bus-frequency = <330000000>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <7 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <7 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -109,9 +110,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -121,9 +122,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -132,7 +133,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
 		};
 
@@ -140,17 +141,17 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
-			reg = <919c0 30>;
+			reg = <0x919c0 0x30>;
 			ranges;
 
 			muram@80000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 80000 10000>;
+				ranges = <0x0 0x80000 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 4000 9000 2000>;
+					reg = <0x0 0x4000 0x9000 0x2000>;
 				};
 			};
 
@@ -158,17 +159,17 @@
 				compatible = "fsl,mpc8560-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <919f0 10 915f0 10>;
-				clock-frequency = <d#165000000>;
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <165000000>;
 			};
 
 			cpmpic: pic@90c00 {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
-				interrupts = <2e 2>;
+				interrupts = <46 2>;
 				interrupt-parent = <&mpic>;
-				reg = <90c00 80>;
+				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
 			};
 
@@ -176,11 +177,11 @@
 				device_type = "serial";
 				compatible = "fsl,mpc8560-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <91a00 20 88000 100>;
+				reg = <0x91a00 0x20 0x88000 0x100>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <00800000>;
-				current-speed = <1c200>;
-				interrupts = <28 8>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <115200>;
+				interrupts = <40 8>;
 				interrupt-parent = <&cpmpic>;
 			};
 
@@ -188,11 +189,11 @@
 				device_type = "serial";
 				compatible = "fsl,mpc8560-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <91a20 20 88100 100>;
+				reg = <0x91a20 0x20 0x88100 0x100>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <04a00000>;
-				current-speed = <1c200>;
-				interrupts = <29 8>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <115200>;
+				interrupts = <41 8>;
 				interrupt-parent = <&cpmpic>;
 			};
 
@@ -200,10 +201,10 @@
 				device_type = "network";
 				compatible = "fsl,mpc8560-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <91320 20 88500 100 913b0 1>;
+				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <16200300>;
-				interrupts = <21 8>;
+				fsl,cpm-command = <0x16200300>;
+				interrupts = <33 8>;
 				interrupt-parent = <&cpmpic>;
 				phy-handle = <&phy2>;
 			};
@@ -212,10 +213,10 @@
 				device_type = "network";
 				compatible = "fsl,mpc8560-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <91340 20 88600 100 913d0 1>;
+				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <1a400300>;
-				interrupts = <22 8>;
+				fsl,cpm-command = <0x1a400300>;
+				interrupts = <34 8>;
 				interrupt-parent = <&cpmpic>;
 				phy-handle = <&phy3>;
 			};
@@ -229,87 +230,87 @@
 		#address-cells = <3>;
 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 		device_type = "pci";
-		reg = <e0008000 1000>;
-		clock-frequency = <3f940aa>;
-		interrupt-map-mask = <f800 0 0 7>;
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 				/* IDSEL 0x2 */
-				 1000 0 0 1 &mpic 1 1
-				 1000 0 0 2 &mpic 2 1
-				 1000 0 0 3 &mpic 3 1
-				 1000 0 0 4 &mpic 4 1
+				 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 				/* IDSEL 0x3 */
-				 1800 0 0 1 &mpic 4 1
-				 1800 0 0 2 &mpic 1 1
-				 1800 0 0 3 &mpic 2 1
-				 1800 0 0 4 &mpic 3 1
+				 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 0x4 */
-				 2000 0 0 1 &mpic 3 1
-				 2000 0 0 2 &mpic 4 1
-				 2000 0 0 3 &mpic 1 1
-				 2000 0 0 4 &mpic 2 1
+				 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 				/* IDSEL 0x5  */
-				 2800 0 0 1 &mpic 2 1
-				 2800 0 0 2 &mpic 3 1
-				 2800 0 0 3 &mpic 4 1
-				 2800 0 0 4 &mpic 1 1
+				 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 				/* IDSEL 12 */
-				 6000 0 0 1 &mpic 1 1
-				 6000 0 0 2 &mpic 2 1
-				 6000 0 0 3 &mpic 3 1
-				 6000 0 0 4 &mpic 4 1
+				 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 				/* IDSEL 13 */
-				 6800 0 0 1 &mpic 4 1
-				 6800 0 0 2 &mpic 1 1
-				 6800 0 0 3 &mpic 2 1
-				 6800 0 0 4 &mpic 3 1
+				 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 14*/
-				 7000 0 0 1 &mpic 3 1
-				 7000 0 0 2 &mpic 4 1
-				 7000 0 0 3 &mpic 1 1
-				 7000 0 0 4 &mpic 2 1
+				 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 				/* IDSEL 15 */
-				 7800 0 0 1 &mpic 2 1
-				 7800 0 0 2 &mpic 3 1
-				 7800 0 0 3 &mpic 4 1
-				 7800 0 0 4 &mpic 1 1
+				 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 				/* IDSEL 18 */
-				 9000 0 0 1 &mpic 1 1
-				 9000 0 0 2 &mpic 2 1
-				 9000 0 0 3 &mpic 3 1
-				 9000 0 0 4 &mpic 4 1
+				 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 				/* IDSEL 19 */
-				 9800 0 0 1 &mpic 4 1
-				 9800 0 0 2 &mpic 1 1
-				 9800 0 0 3 &mpic 2 1
-				 9800 0 0 4 &mpic 3 1
+				 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 20 */
-				 a000 0 0 1 &mpic 3 1
-				 a000 0 0 2 &mpic 4 1
-				 a000 0 0 3 &mpic 1 1
-				 a000 0 0 4 &mpic 2 1
+				 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 				/* IDSEL 21 */
-				 a800 0 0 1 &mpic 2 1
-				 a800 0 0 2 &mpic 3 1
-				 a800 0 0 3 &mpic 4 1
-				 a800 0 0 4 &mpic 1 1>;
+				 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 01000000>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 97bc048f215..a025a8ededc 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8568E MDS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,10 +9,7 @@
  * option) any later version.
  */
 
-
-/*
-/memreserve/	00000000 1000000;
-*/
+/dts-v1/;
 
 / {
 	model = "MPC8568EMDS";
@@ -37,11 +34,11 @@
 
 		PowerPC,8568@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -50,36 +47,36 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 10000000>;
+		reg = <0x0 0x10000000>;
 	};
 
 	bcsr@f8000000 {
 		device_type = "board-control";
-		reg = <f8000000 8000>;
+		reg = <0xf8000000 0x8000>;
 	};
 
 	soc8568@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00001000>;
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8568-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8568-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <80000>;	// L2, 512K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -87,14 +84,14 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
 			rtc@68 {
 				compatible = "dallas,ds1374";
-				reg = <68>;
+				reg = <0x68>;
 			};
 		};
 
@@ -103,8 +100,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -113,30 +110,30 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@7 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <7>;
+				reg = <0x7>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -146,9 +143,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
- 			interrupts = <1d 2 1e 2 22 2>;
+ 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 		};
@@ -158,9 +155,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
- 			interrupts = <23 2 24 2 28 2>;
+ 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 		};
@@ -169,15 +166,15 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;
+			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8548-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -185,9 +182,9 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;
+			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -195,13 +192,13 @@
 			device_type = "crypto";
 			model = "SEC2";
 			compatible = "talitos";
-			reg = <30000 f000>;
-			interrupts = <2d 2>;
+			reg = <0x30000 0xf000>;
+			interrupts = <45 2>;
 			interrupt-parent = <&mpic>;
 			num-channels = <4>;
-			channel-fifo-len = <18>;
-			exec-units-mask = <000000fe>;
-			descriptor-types-mask = <012b0ebf>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0xfe>;
+			descriptor-types-mask = <0x12b0ebf>;
 		};
 
 		mpic: pic@40000 {
@@ -209,73 +206,73 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
 		};
 
 		par_io@e0100 {
-			reg = <e0100 100>;
+			reg = <0xe0100 0x100>;
 			device_type = "par_io";
 			num-ports = <7>;
 
 			pio1: ucc_pin@01 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
-					4  0a  1  0  2  0 	/* TxD0 */
-					4  09  1  0  2  0 	/* TxD1 */
-					4  08  1  0  2  0 	/* TxD2 */
-					4  07  1  0  2  0 	/* TxD3 */
-					4  17  1  0  2  0 	/* TxD4 */
-					4  16  1  0  2  0 	/* TxD5 */
-					4  15  1  0  2  0 	/* TxD6 */
-					4  14  1  0  2  0 	/* TxD7 */
-					4  0f  2  0  2  0 	/* RxD0 */
-					4  0e  2  0  2  0 	/* RxD1 */
-					4  0d  2  0  2  0 	/* RxD2 */
-					4  0c  2  0  2  0 	/* RxD3 */
-					4  1d  2  0  2  0 	/* RxD4 */
-					4  1c  2  0  2  0 	/* RxD5 */
-					4  1b  2  0  2  0 	/* RxD6 */
-					4  1a  2  0  2  0 	/* RxD7 */
-					4  0b  1  0  2  0 	/* TX_EN */
-					4  18  1  0  2  0 	/* TX_ER */
-					4  10  2  0  2  0 	/* RX_DV */
-					4  1e  2  0  2  0 	/* RX_ER */
-					4  11  2  0  2  0 	/* RX_CLK */
-					4  13  1  0  2  0 	/* GTX_CLK */
-					1  1f  2  0  3  0>;	/* GTX125 */
+					0x4  0xa  0x1  0x0  0x2  0x0 	/* TxD0 */
+					0x4  0x9  0x1  0x0  0x2  0x0 	/* TxD1 */
+					0x4  0x8  0x1  0x0  0x2  0x0 	/* TxD2 */
+					0x4  0x7  0x1  0x0  0x2  0x0 	/* TxD3 */
+					0x4  0x17  0x1  0x0  0x2  0x0 	/* TxD4 */
+					0x4  0x16  0x1  0x0  0x2  0x0 	/* TxD5 */
+					0x4  0x15  0x1  0x0  0x2  0x0 	/* TxD6 */
+					0x4  0x14  0x1  0x0  0x2  0x0 	/* TxD7 */
+					0x4  0xf  0x2  0x0  0x2  0x0 	/* RxD0 */
+					0x4  0xe  0x2  0x0  0x2  0x0 	/* RxD1 */
+					0x4  0xd  0x2  0x0  0x2  0x0 	/* RxD2 */
+					0x4  0xc  0x2  0x0  0x2  0x0 	/* RxD3 */
+					0x4  0x1d  0x2  0x0  0x2  0x0 	/* RxD4 */
+					0x4  0x1c  0x2  0x0  0x2  0x0 	/* RxD5 */
+					0x4  0x1b  0x2  0x0  0x2  0x0 	/* RxD6 */
+					0x4  0x1a  0x2  0x0  0x2  0x0 	/* RxD7 */
+					0x4  0xb  0x1  0x0  0x2  0x0 	/* TX_EN */
+					0x4  0x18  0x1  0x0  0x2  0x0 	/* TX_ER */
+					0x4  0x10  0x2  0x0  0x2  0x0 	/* RX_DV */
+					0x4  0x1e  0x2  0x0  0x2  0x0 	/* RX_ER */
+					0x4  0x11  0x2  0x0  0x2  0x0 	/* RX_CLK */
+					0x4  0x13  0x1  0x0  0x2  0x0 	/* GTX_CLK */
+					0x1  0x1f  0x2  0x0  0x3  0x0>;	/* GTX125 */
 			};
 
 			pio2: ucc_pin@02 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
-					5  0a 1  0  2  0   /* TxD0 */
-					5  09 1  0  2  0   /* TxD1 */
-					5  08 1  0  2  0   /* TxD2 */
-					5  07 1  0  2  0   /* TxD3 */
-					5  17 1  0  2  0   /* TxD4 */
-					5  16 1  0  2  0   /* TxD5 */
-					5  15 1  0  2  0   /* TxD6 */
-					5  14 1  0  2  0   /* TxD7 */
-					5  0f 2  0  2  0   /* RxD0 */
-					5  0e 2  0  2  0   /* RxD1 */
-					5  0d 2  0  2  0   /* RxD2 */
-					5  0c 2  0  2  0   /* RxD3 */
-					5  1d 2  0  2  0   /* RxD4 */
-					5  1c 2  0  2  0   /* RxD5 */
-					5  1b 2  0  2  0   /* RxD6 */
-					5  1a 2  0  2  0   /* RxD7 */
-					5  0b 1  0  2  0   /* TX_EN */
-					5  18 1  0  2  0   /* TX_ER */
-					5  10 2  0  2  0   /* RX_DV */
-					5  1e 2  0  2  0   /* RX_ER */
-					5  11 2  0  2  0   /* RX_CLK */
-					5  13 1  0  2  0   /* GTX_CLK */
-					1  1f 2  0  3  0   /* GTX125 */
-					4  06 3  0  2  0   /* MDIO */
-					4  05 1  0  2  0>; /* MDC */
+					0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
+					0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
+					0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
+					0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
+					0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
+					0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
+					0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
+					0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
+					0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
+					0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
+					0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
+					0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
+					0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
+					0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
+					0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
+					0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
+					0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
+					0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
+					0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
+					0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
+					0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
+					0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
+					0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
+					0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
+					0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
 			};
 		};
 	};
@@ -285,28 +282,28 @@
 		#size-cells = <1>;
 		device_type = "qe";
 		compatible = "fsl,qe";
-		ranges = <0 e0080000 00040000>;
-		reg = <e0080000 480>;
+		ranges = <0x0 0xe0080000 0x40000>;
+		reg = <0xe0080000 0x480>;
 		brg-frequency = <0>;
-		bus-frequency = <179A7B00>;
+		bus-frequency = <396000000>;
 
 		muram@10000 {
  			#address-cells = <1>;
  			#size-cells = <1>;
 			compatible = "fsl,qe-muram", "fsl,cpm-muram";
-			ranges = <0 00010000 0000c000>;
+			ranges = <0x0 0x10000 0x10000>;
 
 			data-only@0 {
 				compatible = "fsl,qe-muram-data",
 					     "fsl,cpm-muram-data";
-				reg = <0 c000>;
+				reg = <0x0 0x10000>;
 			};
 		};
 
 		spi@4c0 {
 			cell-index = <0>;
 			compatible = "fsl,spi";
-			reg = <4c0 40>;
+			reg = <0x4c0 0x40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
 			mode = "cpu";
@@ -315,7 +312,7 @@
 		spi@500 {
 			cell-index = <1>;
 			compatible = "fsl,spi";
-			reg = <500 40>;
+			reg = <0x500 0x40>;
 			interrupts = <1>;
 			interrupt-parent = <&qeic>;
 			mode = "cpu";
@@ -324,11 +321,9 @@
 		enet2: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <1>;
-			device-id = <1>;
-			reg = <2000 200>;
-			interrupts = <20>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
 			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
@@ -341,11 +336,9 @@
 		enet3: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <2>;
-			device-id = <2>;
-			reg = <3000 200>;
-			interrupts = <21>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
 			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
@@ -358,7 +351,7 @@
 		mdio@2120 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <2120 18>;
+			reg = <0x2120 0x18>;
 			compatible = "fsl,ucc-mdio";
 
 			/* These are the same PHYs as on
@@ -366,25 +359,25 @@
 			qe_phy0: ethernet-phy@07 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <7>;
+				reg = <0x7>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy1: ethernet-phy@01 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy2: ethernet-phy@02 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy3: ethernet-phy@03 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -394,9 +387,9 @@
 			compatible = "fsl,qe-ic";
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			big-endian;
-			interrupts = <2e 2 2e 2>; //high:30 low:30
+			interrupts = <46 2 46 2>; //high:30 low:30
 			interrupt-parent = <&mpic>;
 		};
 
@@ -404,30 +397,30 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x12 AD18 */
-			9000 0 0 1 &mpic 5 1
-			9000 0 0 2 &mpic 6 1
-			9000 0 0 3 &mpic 7 1
-			9000 0 0 4 &mpic 4 1
+			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 			/* IDSEL 0x13 AD19 */
-			9800 0 0 1 &mpic 6 1
-			9800 0 0 2 &mpic 7 1
-			9800 0 0 3 &mpic 4 1
-			9800 0 0 4 &mpic 5 1>;
+			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 00800000>;
-		clock-frequency = <3f940aa>;
+		interrupts = <24 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
@@ -435,39 +428,39 @@
 	/* PCI Express */
 	pci1: pcie@e000a000 {
 		cell-index = <2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x0 (PEX) */
-			00000 0 0 1 &mpic 0 1
-			00000 0 0 2 &mpic 1 1
-			00000 0 0 3 &mpic 2 1
-			00000 0 0 4 &mpic 3 1>;
+			00000 0x0 0x0 0x1 &mpic 0x0 0x1
+			00000 0x0 0x0 0x2 &mpic 0x1 0x1
+			00000 0x0 0x0 0x3 &mpic 0x2 0x1
+			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 10000000
-			  01000000 0 00000000 e2800000 0 00800000>;
-		clock-frequency = <1fca055>;
+		interrupts = <26 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <33333333>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000a000 1000>;
+		reg = <0xe000a000 0x1000>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 10000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00800000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index db37214aee3..66f27ab613a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8572 DS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 / {
 	model = "fsl,MPC8572DS";
 	compatible = "fsl,MPC8572DS";
@@ -33,11 +34,11 @@
 
 		PowerPC,8572@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -45,11 +46,11 @@
 
 		PowerPC,8572@1 {
 			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -58,38 +59,38 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 00000000>;	// Filled by U-Boot
+		reg = <0x0 0x0>;	// Filled by U-Boot
 	};
 
 	soc8572@ffe00000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <00000000 ffe00000 00100000>;
-		reg = <ffe00000 00001000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
+		ranges = <0x0 0xffe00000 0x100000>;
+		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8572-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		memory-controller@6000 {
 			compatible = "fsl,mpc8572-memory-controller";
-			reg = <6000 1000>;
+			reg = <0x6000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <80000>;	// L2, 512K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -97,8 +98,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -108,8 +109,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -118,27 +119,27 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <0>;
+				interrupts = <10 1>;
+				reg = <0x0>;
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <1>;
+				interrupts = <10 1>;
+				reg = <0x1>;
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <2>;
+				interrupts = <10 1>;
+				reg = <0x2>;
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <3>;
+				interrupts = <10 1>;
+				reg = <0x3>;
 			};
 		};
 
@@ -147,9 +148,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
@@ -160,9 +161,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
@@ -173,9 +174,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1f 2 20 2 21 2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
@@ -186,9 +187,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <27000 1000>;
+			reg = <0x27000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <25 2 26 2 27 2>;
+			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 			phy-connection-type = "rgmii-id";
@@ -198,9 +199,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;
+			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -208,15 +209,15 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;
+			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8572-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -225,7 +226,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 			big-endian;
@@ -239,167 +240,167 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <ffe08000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 ffc00000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xffe08000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
-		interrupt-map-mask = <ff00 0 0 7>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x11 func 0 - PCI slot 1 */
-			8800 0 0 1 &mpic 2 1
-			8800 0 0 2 &mpic 3 1
-			8800 0 0 3 &mpic 4 1
-			8800 0 0 4 &mpic 1 1
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 1 - PCI slot 1 */
-			8900 0 0 1 &mpic 2 1
-			8900 0 0 2 &mpic 3 1
-			8900 0 0 3 &mpic 4 1
-			8900 0 0 4 &mpic 1 1
+			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 2 - PCI slot 1 */
-			8a00 0 0 1 &mpic 2 1
-			8a00 0 0 2 &mpic 3 1
-			8a00 0 0 3 &mpic 4 1
-			8a00 0 0 4 &mpic 1 1
+			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 3 - PCI slot 1 */
-			8b00 0 0 1 &mpic 2 1
-			8b00 0 0 2 &mpic 3 1
-			8b00 0 0 3 &mpic 4 1
-			8b00 0 0 4 &mpic 1 1
+			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 4 - PCI slot 1 */
-			8c00 0 0 1 &mpic 2 1
-			8c00 0 0 2 &mpic 3 1
-			8c00 0 0 3 &mpic 4 1
-			8c00 0 0 4 &mpic 1 1
+			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 5 - PCI slot 1 */
-			8d00 0 0 1 &mpic 2 1
-			8d00 0 0 2 &mpic 3 1
-			8d00 0 0 3 &mpic 4 1
-			8d00 0 0 4 &mpic 1 1
+			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 6 - PCI slot 1 */
-			8e00 0 0 1 &mpic 2 1
-			8e00 0 0 2 &mpic 3 1
-			8e00 0 0 3 &mpic 4 1
-			8e00 0 0 4 &mpic 1 1
+			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 7 - PCI slot 1 */
-			8f00 0 0 1 &mpic 2 1
-			8f00 0 0 2 &mpic 3 1
-			8f00 0 0 3 &mpic 4 1
-			8f00 0 0 4 &mpic 1 1
+			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x12 func 0 - PCI slot 2 */
-			9000 0 0 1 &mpic 3 1
-			9000 0 0 2 &mpic 4 1
-			9000 0 0 3 &mpic 1 1
-			9000 0 0 4 &mpic 2 1
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 1 - PCI slot 2 */
-			9100 0 0 1 &mpic 3 1
-			9100 0 0 2 &mpic 4 1
-			9100 0 0 3 &mpic 1 1
-			9100 0 0 4 &mpic 2 1
+			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 2 - PCI slot 2 */
-			9200 0 0 1 &mpic 3 1
-			9200 0 0 2 &mpic 4 1
-			9200 0 0 3 &mpic 1 1
-			9200 0 0 4 &mpic 2 1
+			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 3 - PCI slot 2 */
-			9300 0 0 1 &mpic 3 1
-			9300 0 0 2 &mpic 4 1
-			9300 0 0 3 &mpic 1 1
-			9300 0 0 4 &mpic 2 1
+			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 4 - PCI slot 2 */
-			9400 0 0 1 &mpic 3 1
-			9400 0 0 2 &mpic 4 1
-			9400 0 0 3 &mpic 1 1
-			9400 0 0 4 &mpic 2 1
+			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 5 - PCI slot 2 */
-			9500 0 0 1 &mpic 3 1
-			9500 0 0 2 &mpic 4 1
-			9500 0 0 3 &mpic 1 1
-			9500 0 0 4 &mpic 2 1
+			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 6 - PCI slot 2 */
-			9600 0 0 1 &mpic 3 1
-			9600 0 0 2 &mpic 4 1
-			9600 0 0 3 &mpic 1 1
-			9600 0 0 4 &mpic 2 1
+			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 7 - PCI slot 2 */
-			9700 0 0 1 &mpic 3 1
-			9700 0 0 2 &mpic 4 1
-			9700 0 0 3 &mpic 1 1
-			9700 0 0 4 &mpic 2 1
+			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			// IDSEL 0x1c  USB
-			e000 0 0 1 &i8259 c 2
-			e100 0 0 2 &i8259 9 2
-			e200 0 0 3 &i8259 a 2
-			e300 0 0 4 &i8259 b 2
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
 
 			// IDSEL 0x1d  Audio
-			e800 0 0 1 &i8259 6 2
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
 
 			// IDSEL 0x1e Legacy
-			f000 0 0 1 &i8259 7 2
-			f100 0 0 1 &i8259 7 2
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
 
 			// IDSEL 0x1f IDE/SATA
-			f800 0 0 1 &i8259 e 2
-			f900 0 0 1 &i8259 5 2
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
 
 			>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 80000000
-				  02000000 0 80000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00100000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 			uli1575@0 {
-				reg = <0 0 0 0 0>;
+				reg = <0x0 0x0 0x0 0x0 0x0>;
 				#size-cells = <2>;
 				#address-cells = <3>;
-				ranges = <02000000 0 80000000
-					  02000000 0 80000000
-					  0 20000000
+				ranges = <0x2000000 0x0 0x80000000
+					  0x2000000 0x0 0x80000000
+					  0x0 0x20000000
 
-					  01000000 0 00000000
-					  01000000 0 00000000
-					  0 00100000>;
+					  0x1000000 0x0 0x0
+					  0x1000000 0x0 0x0
+					  0x0 0x100000>;
 				isa@1e {
 					device_type = "isa";
 					#interrupt-cells = <2>;
 					#size-cells = <1>;
 					#address-cells = <2>;
-					reg = <f000 0 0 0 0>;
-					ranges = <1 0 01000000 0 0
-						  00001000>;
+					reg = <0xf000 0x0 0x0 0x0 0x0>;
+					ranges = <0x1 0x0 0x1000000 0x0 0x0
+						  0x1000>;
 					interrupt-parent = <&i8259>;
 
 					i8259: interrupt-controller@20 {
-						reg = <1 20 2
-						       1 a0 2
-						       1 4d0 2>;
+						reg = <0x1 0x20 0x2
+						       0x1 0xa0 0x2
+						       0x1 0x4d0 0x2>;
 						interrupt-controller;
 						device_type = "interrupt-controller";
 						#address-cells = <0>;
@@ -412,29 +413,29 @@
 					i8042@60 {
 						#size-cells = <0>;
 						#address-cells = <1>;
-						reg = <1 60 1 1 64 1>;
-						interrupts = <1 3 c 3>;
+						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+						interrupts = <1 3 12 3>;
 						interrupt-parent =
 							<&i8259>;
 
 						keyboard@0 {
-							reg = <0>;
+							reg = <0x0>;
 							compatible = "pnpPNP,303";
 						};
 
 						mouse@1 {
-							reg = <1>;
+							reg = <0x1>;
 							compatible = "pnpPNP,f03";
 						};
 					};
 
 					rtc@70 {
 						compatible = "pnpPNP,b00";
-						reg = <1 70 2>;
+						reg = <0x1 0x70 0x2>;
 					};
 
 					gpio@400 {
-						reg = <1 400 80>;
+						reg = <0x1 0x400 0x80>;
 					};
 				};
 			};
@@ -449,33 +450,33 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <ffe09000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 ffc10000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xffe09000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
 			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00100000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 		};
 	};
 
@@ -486,33 +487,33 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <ffe0a000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 c0000000 c0000000 0 20000000
-			  01000000 0 00000000 ffc20000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xffe0a000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <1b 2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupts = <27 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
 			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 c0000000
-				  02000000 0 c0000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00100000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 79385bcd5c5..7f9b999843c 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "MPC8641HPCN";
-	compatible = "mpc86xx";
+	compatible = "fsl,mpc8641hpcn";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index daf9433e906..765e43c997d 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -2,6 +2,7 @@
  * MPC866 ADS Device Tree Source
  *
  * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +10,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC866ADS";
@@ -22,37 +24,37 @@
 
 		PowerPC,866@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <10>;	// 16 bytes
-			i-cache-line-size = <10>;	// 16 bytes
-			d-cache-size = <2000>;		// L1, 8K
-			i-cache-size = <4000>;		// L1, 16K
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x2000>;		// L1, 8K
+			i-cache-size = <0x4000>;		// L1, 16K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
-			interrupts = <f 2>;	// decrementer interrupt
+			interrupts = <15 2>;	// decrementer interrupt
 			interrupt-parent = <&PIC>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 800000>;
+		reg = <0x0 0x800000>;
 	};
 
 	localbus@ff000100 {
 		compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <ff000100 40>;
+		reg = <0xff000100 0x40>;
 
 		ranges = <
-			1 0 ff080000 00008000
-			5 0 ff0a0000 00008000
+			0x1 0x0 0xff080000 0x8000
+			0x5 0x0 0xff0a0000 0x8000
 		>;
 
 		board-control@1,0 {
-			reg = <1 0 20 5 300 4>;
+			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
 			compatible = "fsl,mpc866ads-bcsr";
 		};
 	};
@@ -61,17 +63,17 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 ff000000 00100000>;
-		reg = <ff000000 00000200>;
+		ranges = <0x0 0xff000000 0x100000>;
+		reg = <0xff000000 0x200>;
 		bus-frequency = <0>;
 
 		mdio@e00 {
 			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			PHY: ethernet-phy@f {
-				reg = <f>;
+				reg = <0xf>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -80,7 +82,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc866-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <3 1>;
 			interrupt-parent = <&PIC>;
@@ -91,7 +93,7 @@
 		PIC: pic@0 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0 24>;
+			reg = <0x0 0x24>;
 			compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
 		};
 
@@ -100,7 +102,7 @@
 			#size-cells = <1>;
 			compatible = "fsl,mpc866-cpm", "fsl,cpm1";
 			ranges;
-			reg = <9c0 40>;
+			reg = <0x9c0 0x40>;
 			brg-frequency = <0>;
 			interrupts = <0 2>;	// cpm error interrupt
 			interrupt-parent = <&CPM_PIC>;
@@ -108,11 +110,11 @@
 			muram@2000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 2000 2000>;
+				ranges = <0x0 0x2000 0x2000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 1c00>;
+					reg = <0x0 0x1c00>;
 				};
 			};
 
@@ -120,7 +122,7 @@
 				compatible = "fsl,mpc866-brg",
 					     "fsl,cpm1-brg",
 					     "fsl,cpm-brg";
-				reg = <9f0 10>;
+				reg = <0x9f0 0x10>;
 				clock-frequency = <0>;
 			};
 
@@ -130,7 +132,7 @@
 				#interrupt-cells = <1>;
 				interrupts = <5 2 0 2>;
 				interrupt-parent = <&PIC>;
-				reg = <930 20>;
+				reg = <0x930 0x20>;
 				compatible = "fsl,mpc866-cpm-pic",
 				             "fsl,cpm1-pic";
 			};
@@ -140,31 +142,31 @@
 				device_type = "serial";
 				compatible = "fsl,mpc866-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a80 10 3e80 40>;
+				reg = <0xa80 0x10 0x3e80 0x40>;
 				interrupts = <4>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0090>;
+				fsl,cpm-command = <0x90>;
 			};
 
 			serial@a90 {
 				device_type = "serial";
 				compatible = "fsl,mpc866-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a90 10 3f80 40>;
+				reg = <0xa90 0x10 0x3f80 0x40>;
 				interrupts = <3>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <00d0>;
+				fsl,cpm-command = <0xd0>;
 			};
 
 			ethernet@a00 {
 				device_type = "network";
 				compatible = "fsl,mpc866-scc-enet",
 				             "fsl,cpm1-scc-enet";
-				reg = <a00 18 3c00 100>;
+				reg = <0xa00 0x18 0x3c00 0x100>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <1e>;
+				interrupts = <30>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-command = <0000>;
 				linux,network-index = <1>;
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index d84a012c2aa..9895043722b 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -2,7 +2,7 @@
  * MPC885 ADS Device Tree Source
  *
  * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -10,6 +10,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC885ADS";
@@ -23,45 +24,45 @@
 
 		PowerPC,885@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <d#16>;
-			i-cache-line-size = <d#16>;
-			d-cache-size = <d#8192>;
-			i-cache-size = <d#8192>;
+			reg = <0x0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
-			interrupts = <f 2>;	// decrementer interrupt
+			interrupts = <15 2>;	// decrementer interrupt
 			interrupt-parent = <&PIC>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x0 0x0>;
 	};
 
 	localbus@ff000100 {
 		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <ff000100 40>;
+		reg = <0xff000100 0x40>;
 
 		ranges = <
-			0 0 fe000000 00800000
-			1 0 ff080000 00008000
-			5 0 ff0a0000 00008000
+			0x0 0x0 0xfe000000 0x800000
+			0x1 0x0 0xff080000 0x8000
+			0x5 0x0 0xff0a0000 0x8000
 		>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0 0 800000>;
+			reg = <0x0 0x0 0x800000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
 
 		board-control@1,0 {
-			reg = <1 0 20 5 300 4>;
+			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
 			compatible = "fsl,mpc885ads-bcsr";
 		};
 	};
@@ -71,30 +72,30 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 ff000000 00004000>;
+		ranges = <0x0 0xff000000 0x4000>;
 		bus-frequency = <0>;
 
 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <ff000000 4000>;
+		reg = <0xff000000 0x4000>;
 
 		mdio@e00 {
 			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			PHY0: ethernet-phy@0 {
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY1: ethernet-phy@1 {
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY2: ethernet-phy@2 {
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -103,7 +104,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc885-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <3 1>;
 			interrupt-parent = <&PIC>;
@@ -115,7 +116,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc885-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <1e00 188>;
+			reg = <0x1e00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <7 1>;
 			interrupt-parent = <&PIC>;
@@ -126,7 +127,7 @@
 		PIC: interrupt-controller@0 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0 24>;
+			reg = <0x0 0x24>;
 			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
 		};
 
@@ -136,29 +137,29 @@
 			#size-cells = <2>;
 			compatible = "fsl,pq-pcmcia";
 			device_type = "pcmcia";
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			interrupt-parent = <&PIC>;
-			interrupts = <d 1>;
+			interrupts = <13 1>;
 		};
 
 		cpm@9c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
-			command-proc = <9c0>;
+			command-proc = <0x9c0>;
 			interrupts = <0>;	// cpm error interrupt
 			interrupt-parent = <&CPM_PIC>;
-			reg = <9c0 40>;
+			reg = <0x9c0 0x40>;
 			ranges;
 
 			muram@2000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 2000 2000>;
+				ranges = <0x0 0x2000 0x2000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 1c00>;
+					reg = <0x0 0x1c00>;
 				};
 			};
 
@@ -167,7 +168,7 @@
 				             "fsl,cpm1-brg",
 				             "fsl,cpm-brg";
 				clock-frequency = <0>;
-				reg = <9f0 10>;
+				reg = <0x9f0 0x10>;
 			};
 
 			CPM_PIC: interrupt-controller@930 {
@@ -175,7 +176,7 @@
 				#interrupt-cells = <1>;
 				interrupts = <5 2 0 2>;
 				interrupt-parent = <&PIC>;
-				reg = <930 20>;
+				reg = <0x930 0x20>;
 				compatible = "fsl,mpc885-cpm-pic",
 				             "fsl,cpm1-pic";
 			};
@@ -184,34 +185,34 @@
 				device_type = "serial";
 				compatible = "fsl,mpc885-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a80 10 3e80 40>;
+				reg = <0xa80 0x10 0x3e80 0x40>;
 				interrupts = <4>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0090>;
+				fsl,cpm-command = <0x90>;
 			};
 
 			serial@a90 {
 				device_type = "serial";
 				compatible = "fsl,mpc885-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a90 10 3f80 40>;
+				reg = <0xa90 0x10 0x3f80 0x40>;
 				interrupts = <3>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <00d0>;
+				fsl,cpm-command = <0xd0>;
 			};
 
 			ethernet@a40 {
 				device_type = "network";
 				compatible = "fsl,mpc885-scc-enet",
 				             "fsl,cpm1-scc-enet";
-				reg = <a40 18 3e00 100>;
+				reg = <0xa40 0x18 0x3e00 0x100>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <1c>;
+				interrupts = <28>;
 				interrupt-parent = <&CPM_PIC>;
 				phy-handle = <&PHY2>;
-				fsl,cpm-command = <0080>;
+				fsl,cpm-command = <0x80>;
 				linux,network-index = <2>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts
index 2d564921897..b2d61091b36 100644
--- a/arch/powerpc/boot/dts/pq2fads.dts
+++ b/arch/powerpc/boot/dts/pq2fads.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,8 @@
  * option) any later version.
  */
 
+/dts-v1/;
+
 / {
 	model = "pq2fads";
 	compatible = "fsl,pq2fads";
@@ -21,11 +23,11 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <d#32>;
-			i-cache-line-size = <d#32>;
-			d-cache-size = <d#16384>;
-			i-cache-size = <d#16384>;
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
 			timebase-frequency = <0>;
 			clock-frequency = <0>;
 		};
@@ -33,7 +35,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x0 0x0>;
 	};
 
 	localbus@f0010100 {
@@ -41,67 +43,67 @@
 		             "fsl,pq2-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <f0010100 60>;
+		reg = <0xf0010100 0x60>;
 
-		ranges = <0 0 fe000000 00800000
-		          1 0 f4500000 00008000
-		          8 0 f8200000 00008000>;
+		ranges = <0x0 0x0 0xfe000000 0x800000
+		          0x1 0x0 0xf4500000 0x8000
+		          0x8 0x0 0xf8200000 0x8000>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0 0 800000>;
+			reg = <0x0 0x0 0x800000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
 
 		bcsr@1,0 {
-			reg = <1 0 20>;
+			reg = <0x1 0x0 0x20>;
 			compatible = "fsl,pq2fads-bcsr";
 		};
 
 		PCI_PIC: pic@8,0 {
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			reg = <8 0 8>;
+			reg = <0x8 0x0 0x8>;
 			compatible = "fsl,pq2ads-pci-pic";
 			interrupt-parent = <&PIC>;
-			interrupts = <18 8>;
+			interrupts = <24 8>;
 		};
 	};
 
 	pci@f0010800 {
 		device_type = "pci";
-		reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
 		compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		clock-frequency = <d#66000000>;
-		interrupt-map-mask = <f800 0 0 7>;
+		clock-frequency = <66000000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 		                /* IDSEL 0x16 */
-		                 b000 0 0 1 &PCI_PIC 0
-		                 b000 0 0 2 &PCI_PIC 1
-		                 b000 0 0 3 &PCI_PIC 2
-		                 b000 0 0 4 &PCI_PIC 3
+		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
 
 		                /* IDSEL 0x17 */
-		                 b800 0 0 1 &PCI_PIC 4
-		                 b800 0 0 2 &PCI_PIC 5
-		                 b800 0 0 3 &PCI_PIC 6
-		                 b800 0 0 4 &PCI_PIC 7
+		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
 
 		                /* IDSEL 0x18 */
-		                 c000 0 0 1 &PCI_PIC 8
-		                 c000 0 0 2 &PCI_PIC 9
-		                 c000 0 0 3 &PCI_PIC a
-		                 c000 0 0 4 &PCI_PIC b>;
+		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
 
 		interrupt-parent = <&PIC>;
-		interrupts = <12 8>;
-		ranges = <42000000 0 80000000 80000000 0 20000000
-		          02000000 0 a0000000 a0000000 0 20000000
-		          01000000 0 00000000 f6000000 0 02000000>;
+		interrupts = <18 8>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
 	};
 
 	soc@f0000000 {
@@ -109,27 +111,27 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "fsl,mpc8280", "fsl,pq2-soc";
-		ranges = <00000000 f0000000 00053000>;
+		ranges = <0x0 0xf0000000 0x53000>;
 
 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <f0000000 00053000>;
+		reg = <0xf0000000 0x53000>;
 
 		cpm@119c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#interrupt-cells = <2>;
 			compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
-			reg = <119c0 30>;
+			reg = <0x119c0 0x30>;
 			ranges;
 
 			muram@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 0 10000>;
+				ranges = <0x0 0x0 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 2000 9800 800>;
+					reg = <0x0 0x2000 0x9800 0x800>;
 				};
 			};
 
@@ -137,53 +139,53 @@
 				compatible = "fsl,mpc8280-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <119f0 10 115f0 10>;
+				reg = <0x119f0 0x10 0x115f0 0x10>;
 			};
 
 			serial@11a00 {
 				device_type = "serial";
 				compatible = "fsl,mpc8280-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <11a00 20 8000 100>;
-				interrupts = <28 8>;
+				reg = <0x11a00 0x20 0x8000 0x100>;
+				interrupts = <40 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <00800000>;
+				fsl,cpm-command = <0x800000>;
 			};
 
 			serial@11a20 {
 				device_type = "serial";
 				compatible = "fsl,mpc8280-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <11a20 20 8100 100>;
-				interrupts = <29 8>;
+				reg = <0x11a20 0x20 0x8100 0x100>;
+				interrupts = <41 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <04a00000>;
+				fsl,cpm-command = <0x4a00000>;
 			};
 
 			ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8280-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <11320 20 8500 100 113b0 1>;
-				interrupts = <21 8>;
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				interrupts = <33 8>;
 				interrupt-parent = <&PIC>;
 				phy-handle = <&PHY0>;
 				linux,network-index = <0>;
-				fsl,cpm-command = <16200300>;
+				fsl,cpm-command = <0x16200300>;
 			};
 
 			ethernet@11340 {
 				device_type = "network";
 				compatible = "fsl,mpc8280-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <11340 20 8600 100 113d0 1>;
-				interrupts = <22 8>;
+				reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
+				interrupts = <34 8>;
 				interrupt-parent = <&PIC>;
 				phy-handle = <&PHY1>;
 				linux,network-index = <1>;
-				fsl,cpm-command = <1a400300>;
+				fsl,cpm-command = <0x1a400300>;
 				local-mac-address = [00 e0 0c 00 79 01];
 			};
 
@@ -194,21 +196,21 @@
 				             "fsl,cpm2-mdio-bitbang";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				reg = <10d40 14>;
+				reg = <0x10d40 0x14>;
 				fsl,mdio-pin = <9>;
-				fsl,mdc-pin = <a>;
+				fsl,mdc-pin = <10>;
 
 				PHY0: ethernet-phy@0 {
 					interrupt-parent = <&PIC>;
-					interrupts = <19 2>;
-					reg = <0>;
+					interrupts = <25 2>;
+					reg = <0x0>;
 					device_type = "ethernet-phy";
 				};
 
 				PHY1: ethernet-phy@1 {
 					interrupt-parent = <&PIC>;
-					interrupts = <19 2>;
-					reg = <3>;
+					interrupts = <25 2>;
+					reg = <0x3>;
 					device_type = "ethernet-phy";
 				};
 			};
@@ -218,17 +220,17 @@
 				#size-cells = <0>;
 				compatible = "fsl,mpc8280-usb",
 				             "fsl,cpm2-usb";
-				reg = <11b60 18 8b00 100>;
+				reg = <0x11b60 0x18 0x8b00 0x100>;
 				interrupt-parent = <&PIC>;
-				interrupts = <b 8>;
-				fsl,cpm-command = <2e600000>;
+				interrupts = <11 8>;
+				fsl,cpm-command = <0x2e600000>;
 			};
 		};
 
 		PIC: interrupt-controller@10c00 {
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			reg = <10c00 80>;
+			reg = <0x10c00 0x80>;
 			compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
new file mode 100644
index 00000000000..3eebeec157b
--- /dev/null
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -0,0 +1,352 @@
+/*
+ * SBC8641D Device Tree Source
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "SBC8641D";
+	compatible = "wind,sbc8641";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;		// L1
+			i-cache-size = <32768>;		// L1
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512M at 0x0
+	};
+
+	localbus@f8005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8641-localbus", "simple-bus";
+		reg = <0xf8005000 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
+			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
+			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
+			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
+			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
+			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "dtb";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@300000 {
+				label = "kernel";
+				reg = <0x00100000 0x00400000>;
+				read-only;
+			};
+			partition@400000 {
+				label = "fs";
+				reg = <0x00500000 0x00a00000>;
+			};
+			partition@700000 {
+				label = "firmware";
+				reg = <0x00f00000 0x00100000>;
+				read-only;
+			};
+		};
+
+		epld@2,0 {
+			compatible = "wrs,epld-localbus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <2 0 0x100000>;
+			ranges = <0 0 5 0 1	// User switches
+				  1 0 5 1 1	// Board ID/Rev
+				  3 0 5 3 1>;	// LEDs
+		};
+	};
+
+	soc@f8000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf8000000 0x00100000>;
+		reg = <0xf8000000 0x00001000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@1f {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 1>;
+				reg = <0x1f>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@2 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30  2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <28 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8641-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@f8008000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf8008000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0000 0 0 1 &mpic 0 1
+			0x0000 0 0 2 &mpic 1 1
+			0x0000 0 0 3 &mpic 2 1
+			0x0000 0 0 4 &mpic 3 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+		};
+
+	};
+
+	pci1: pcie@f8009000 {
+		cell-index = <1>;
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf8009000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0000 0 0 1 &mpic 4 1
+			0x0000 0 0 2 &mpic 5 1
+			0x0000 0 0 3 &mpic 6 1
+			0x0000 0 0 4 &mpic 7 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xa0000000
+				  0x02000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/mpc52xx-psc.c b/arch/powerpc/boot/mpc52xx-psc.c
index 1074626e6a3..d4cb4e4e093 100644
--- a/arch/powerpc/boot/mpc52xx-psc.c
+++ b/arch/powerpc/boot/mpc52xx-psc.c
@@ -51,14 +51,9 @@ static unsigned char psc_getc(void)
 
 int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp)
 {
-	int n;
-
 	/* Get the base address of the psc registers */
-	n = getprop(devp, "virtual-reg", &psc, sizeof(psc));
-	if (n != sizeof(psc)) {
-		if (!dt_xlate_reg(devp, 0, (void *)&psc, NULL))
-			return -1;
-	}
+	if (dt_get_virtual_reg(devp, &psc, 1) < 1)
+		return -1;
 
 	scdp->open = psc_open;
 	scdp->putc = psc_putc;
diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c
index f8f1b2f3141..aef3bdc8916 100644
--- a/arch/powerpc/boot/ns16550.c
+++ b/arch/powerpc/boot/ns16550.c
@@ -55,15 +55,9 @@ static u8 ns16550_tstc(void)
 int ns16550_console_init(void *devp, struct serial_console_data *scdp)
 {
 	int n;
-	unsigned long reg_phys;
 
-	n = getprop(devp, "virtual-reg", &reg_base, sizeof(reg_base));
-	if (n != sizeof(reg_base)) {
-		if (!dt_xlate_reg(devp, 0, &reg_phys, NULL))
-			return -1;
-
-		reg_base = (void *)reg_phys;
-	}
+	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
+		return -1;
 
 	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
 	if (n != sizeof(reg_shift))
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index 4b0544b03c6..321e2f5afe7 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -95,6 +95,7 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size);
 int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr);
 int dt_is_compatible(void *node, const char *compat);
 void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize);
+int dt_get_virtual_reg(void *node, void **addr, int nres);
 
 static inline void *finddevice(const char *name)
 {
diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 7a862a6e3be..7d18440e398 100644
--- a/arch/powerpc/configs/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:14 2008
+# Fri Apr 11 11:10:09 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -196,6 +196,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -360,7 +361,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
 
 #
 # User Modules And Translation Layers
@@ -436,7 +437,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -1293,6 +1294,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 1f57456dd81..1f57456dd81 100644
--- a/arch/powerpc/configs/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 50cceda8994..50cceda8994 100644
--- a/arch/powerpc/configs/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index ac913025713..ac913025713 100644
--- a/arch/powerpc/configs/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e1de399a7bd..e1de399a7bd 100644
--- a/arch/powerpc/configs/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index b4e39cf82a8..b4e39cf82a8 100644
--- a/arch/powerpc/configs/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index b4e82c0e2be..b4e82c0e2be 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index d50a96eddcd..d50a96eddcd 100644
--- a/arch/powerpc/configs/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f377cde785b..f377cde785b 100644
--- a/arch/powerpc/configs/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index a6331769d88..a6331769d88 100644
--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
diff --git a/arch/powerpc/configs/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1f1518229f6..1f1518229f6 100644
--- a/arch/powerpc/configs/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
diff --git a/arch/powerpc/configs/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 2d0debcefdb..2d0debcefdb 100644
--- a/arch/powerpc/configs/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index b998539da86..b998539da86 100644
--- a/arch/powerpc/configs/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index 418bcdb5f91..a9f113b243a 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -162,6 +162,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 CONFIG_MPC85xx_DS=y
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -202,6 +203,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -1255,7 +1257,19 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+# CONFIG_FSL_DMA_SELFTEST is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
 
 #
 # Userspace I/O
@@ -1447,6 +1461,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 851ac911561..851ac911561 100644
--- a/arch/powerpc/configs/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 2b866b38560..2b866b38560 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 53aa6f3173a..53aa6f3173a 100644
--- a/arch/powerpc/configs/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index a469fe91881..a469fe91881 100644
--- a/arch/powerpc/configs/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
diff --git a/arch/powerpc/configs/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 67f67978c74..67f67978c74 100644
--- a/arch/powerpc/configs/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
diff --git a/arch/powerpc/configs/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index fef605579e2..fef605579e2 100644
--- a/arch/powerpc/configs/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
diff --git a/arch/powerpc/configs/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 1d303c49bb0..1d303c49bb0 100644
--- a/arch/powerpc/configs/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
diff --git a/arch/powerpc/configs/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index d39ee3b35bf..d39ee3b35bf 100644
--- a/arch/powerpc/configs/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
diff --git a/arch/powerpc/configs/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index cbf6ad2d71d..cbf6ad2d71d 100644
--- a/arch/powerpc/configs/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
diff --git a/arch/powerpc/configs/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index bbff962c847..bbff962c847 100644
--- a/arch/powerpc/configs/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
diff --git a/arch/powerpc/configs/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 63c5ec8b651..63c5ec8b651 100644
--- a/arch/powerpc/configs/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 029d2dab7de..9e0dd820169 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:25 2008
+# Linux kernel version: 2.6.25-rc9
+# Tue Apr 15 18:07:36 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -201,6 +201,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -353,7 +354,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -362,6 +446,7 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -469,6 +554,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -563,6 +657,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -648,6 +743,11 @@ CONFIG_WATCHDOG=y
 CONFIG_83xx_WDT=y
 
 #
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
 # Sonics Silicon Backplane
 #
 CONFIG_SSB_POSSIBLE=y
@@ -664,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -686,6 +787,14 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -715,8 +824,55 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_R8A66597_HCD is not set
 
 #
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -792,6 +948,7 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -862,6 +1019,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
new file mode 100644
index 00000000000..3180125aa6c
--- /dev/null
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -0,0 +1,1342 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc6
+# Thu Apr 10 18:03:25 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPC8641_HPCN is not set
+CONFIG_SBC8641D=y
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+# CONFIG_MD_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 69a91bd4611..84c86863306 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -110,9 +110,9 @@ transfer_to_handler:
 	stw	r11,PT_REGS(r12)
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
 	/* Check to see if the dbcr0 register is set up to debug.  Use the
-	   single-step bit to do this. */
+	   internal debug mode bit to do this. */
 	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,DBCR0_IC@h
+	andis.	r12,r12,DBCR0_IDM@h
 	beq+	3f
 	/* From user and task is ptraced - load up global dbcr0 */
 	li	r12,-1			/* clear all pending debug events */
@@ -120,6 +120,12 @@ transfer_to_handler:
 	lis	r11,global_dbcr0@ha
 	tophys(r11,r11)
 	addi	r11,r11,global_dbcr0@l
+#ifdef CONFIG_SMP
+	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r9,TI_CPU(r9)
+	slwi	r9,r9,3
+	add	r11,r11,r9
+#endif
 	lwz	r12,0(r11)
 	mtspr	SPRN_DBCR0,r12
 	lwz	r12,4(r11)
@@ -238,10 +244,10 @@ ret_from_syscall:
 	stw	r11,_CCR(r1)
 syscall_exit_cont:
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* If the process has its own DBCR0 value, load it up.  The single
-	   step bit tells us that dbcr0 should be loaded. */
+	/* If the process has its own DBCR0 value, load it up.  The internal
+	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
+	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
 #ifdef CONFIG_44x
@@ -666,10 +672,10 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 
 restore_user:
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* Check whether this process has its own DBCR0 value.  The single
-	   step bit tells us that dbcr0 should be loaded. */
+	/* Check whether this process has its own DBCR0 value.  The internal
+	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
+	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
 
@@ -879,6 +885,12 @@ load_dbcr0:
 	mfspr	r10,SPRN_DBCR0
 	lis	r11,global_dbcr0@ha
 	addi	r11,r11,global_dbcr0@l
+#ifdef CONFIG_SMP
+	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r9,TI_CPU(r9)
+	slwi	r9,r9,3
+	add	r11,r11,r9
+#endif
 	stw	r10,0(r11)
 	mtspr	SPRN_DBCR0,r0
 	lwz	r10,4(r11)
@@ -891,7 +903,7 @@ load_dbcr0:
 	.section .bss
 	.align	4
 global_dbcr0:
-	.space	8
+	.space	8*NR_CPUS
 	.previous
 #endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
 
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index ad071a146a8..b84ec6a2fc9 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -211,7 +211,7 @@ skpinv:	addi	r4,r4,1				/* Increment */
 	SET_IVOR(12, WatchdogTimer);
 	SET_IVOR(13, DataTLBError);
 	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, Debug);
+	SET_IVOR(15, DebugCrit);
 
 	/* Establish the interrupt vector base */
 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
@@ -578,7 +578,7 @@ interrupt_base:
 	b	InstructionStorage
 
 	/* Debug Interrupt */
-	DEBUG_EXCEPTION
+	DEBUG_CRIT_EXCEPTION
 
 /*
  * Local functions
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index ba9393f8e77..aefafc6330c 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -56,8 +56,17 @@
  * is necessary since the MMU is always on, for Book-E parts, and the stacks
  * are offset from KERNELBASE.
  *
+ * There is some space optimization to be had here if desired.  However
+ * to allow for a common kernel with support for debug exceptions either
+ * going to critical or their own debug level we aren't currently
+ * providing configurations that micro-optimize space usage.
  */
-#define BOOKE_EXCEPTION_STACK_SIZE	(8192)
+#ifdef CONFIG_44x
+#define NUM_EXCEPTION_LVLS	2
+#else
+#define NUM_EXCEPTION_LVLS	3
+#endif
+#define BOOKE_EXCEPTION_STACK_SIZE	(4096 * NUM_EXCEPTION_LVLS)
 
 /* CRIT_SPRG only used in critical exception handling */
 #define CRIT_SPRG	SPRN_SPRG2
@@ -68,7 +77,7 @@
 #define CRIT_STACK_TOP		(exception_stack_top)
 
 /* only on e200 for now */
-#define DEBUG_STACK_TOP		(exception_stack_top - 4096)
+#define DEBUG_STACK_TOP		(exception_stack_top - 8192)
 #define DEBUG_SPRG		SPRN_SPRG6W
 
 #ifdef CONFIG_SMP
@@ -212,9 +221,8 @@ label:
  * save (and later restore) the MSR via SPRN_CSRR1, which will still have
  * the MSR_DE bit set.
  */
-#ifdef CONFIG_E200
-#define DEBUG_EXCEPTION							      \
-	START_EXCEPTION(Debug);						      \
+#define DEBUG_DEBUG_EXCEPTION						      \
+	START_EXCEPTION(DebugDebug);					      \
 	DEBUG_EXCEPTION_PROLOG;						      \
 									      \
 	/*								      \
@@ -234,8 +242,8 @@ label:
 	cmplw	r12,r10;						      \
 	blt+	2f;			/* addr below exception vectors */    \
 									      \
-	lis	r10,Debug@h;						      \
-	ori	r10,r10,Debug@l;					      \
+	lis	r10,DebugDebug@h;					      \
+	ori	r10,r10,DebugDebug@l;					      \
 	cmplw	r12,r10;						      \
 	bgt+	2f;			/* addr above exception vectors */    \
 									      \
@@ -265,9 +273,9 @@ label:
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
-#else
-#define DEBUG_EXCEPTION							      \
-	START_EXCEPTION(Debug);						      \
+
+#define DEBUG_CRIT_EXCEPTION						      \
+	START_EXCEPTION(DebugCrit);					      \
 	CRITICAL_EXCEPTION_PROLOG;					      \
 									      \
 	/*								      \
@@ -287,8 +295,8 @@ label:
 	cmplw	r12,r10;						      \
 	blt+	2f;			/* addr below exception vectors */    \
 									      \
-	lis	r10,Debug@h;						      \
-	ori	r10,r10,Debug@l;					      \
+	lis	r10,DebugCrit@h;						      \
+	ori	r10,r10,DebugCrit@l;					      \
 	cmplw	r12,r10;						      \
 	bgt+	2f;			/* addr above exception vectors */    \
 									      \
@@ -318,7 +326,6 @@ label:
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-#endif
 
 #define INSTRUCTION_STORAGE_EXCEPTION					      \
 	START_EXCEPTION(InstructionStorage)				      \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 9f40b3e7710..4ff74414356 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -303,7 +303,10 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	SET_IVOR(12, WatchdogTimer);
 	SET_IVOR(13, DataTLBError);
 	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, Debug);
+	SET_IVOR(15, DebugDebug);
+#if defined(CONFIG_E500)
+	SET_IVOR(15, DebugCrit);
+#endif
 	SET_IVOR(32, SPEUnavailable);
 	SET_IVOR(33, SPEFloatingPointData);
 	SET_IVOR(34, SPEFloatingPointRound);
@@ -738,7 +741,10 @@ interrupt_base:
 
 
 	/* Debug Interrupt */
-	DEBUG_EXCEPTION
+	DEBUG_DEBUG_EXCEPTION
+#if defined(CONFIG_E500)
+	DEBUG_CRIT_EXCEPTION
+#endif
 
 /*
  * Local functions
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 22c3b4f53de..29b2941cada 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -54,7 +54,7 @@ static int grow(rh_info_t * info, int max_blocks)
 
 	new_blocks = max_blocks - info->max_blocks;
 
-	block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL);
+	block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_ATOMIC);
 	if (block == NULL)
 		return -ENOMEM;
 
@@ -258,7 +258,7 @@ rh_info_t *rh_create(unsigned int alignment)
 	if ((alignment & (alignment - 1)) != 0)
 		return ERR_PTR(-EINVAL);
 
-	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	info = kmalloc(sizeof(*info), GFP_ATOMIC);
 	if (info == NULL)
 		return ERR_PTR(-ENOMEM);
 
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 4fad6c7bf9f..917ac889155 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -11,7 +11,6 @@ config MPC8272_ADS
 	select 8260
 	select FSL_SOC
 	select PQ2_ADS_PCI_PIC if PCI
-	select PPC_CPM_NEW_BINDING
 	help
 	  This option enables support for the MPC8272 ADS board
 
@@ -22,7 +21,6 @@ config PQ2FADS
 	select 8260
 	select FSL_SOC
 	select PQ2_ADS_PCI_PIC if PCI
-	select PPC_CPM_NEW_BINDING
 	help
 	  This option enables support for the PQ2FADS board
 
@@ -31,7 +29,6 @@ config EP8248E
 	select 8272
 	select 8260
 	select FSL_SOC
-	select PPC_CPM_NEW_BINDING
 	select MDIO_BITBANG
 	help
 	  This enables support for the Embedded Planet EP8248E board.
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 2293ae51383..c00356bdb1d 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -46,6 +46,7 @@ static void __init mpc837x_rdb_setup_arch(void)
 static struct of_device_id mpc837x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 68065e62fc3..88a3b5cabb1 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -16,6 +16,7 @@
 #define MPC83XX_SCCR_USB_DRCM_10   0x00200000
 #define MPC8315_SCCR_USB_MASK      0x00c00000
 #define MPC8315_SCCR_USB_DRCM_11   0x00c00000
+#define MPC8315_SCCR_USB_DRCM_01   0x00400000
 #define MPC837X_SCCR_USB_DRCM_11   0x00c00000
 
 /* system i/o configuration register low */
@@ -37,6 +38,7 @@
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
 #define CONTROL_UTMI_PHY_EN        0x00000200
+#define CONTROL_REFSEL_24MHZ       0x00000040
 #define CONTROL_REFSEL_48MHZ       0x00000080
 #define CONTROL_PHY_CLK_SEL_ULPI   0x00000400
 #define CONTROL_OTG_PORT           0x00000020
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 471fdd8f410..64bcf0a33c7 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -129,7 +129,7 @@ int mpc831x_usb_cfg(void)
 	if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
 		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
 		                MPC8315_SCCR_USB_MASK,
-		                MPC8315_SCCR_USB_DRCM_11);
+		                MPC8315_SCCR_USB_DRCM_01);
 	else
 		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
 		                MPC83XX_SCCR_USB_MASK,
@@ -164,9 +164,15 @@ int mpc831x_usb_cfg(void)
 	/* Using on-chip PHY */
 	if (prop && (!strcmp(prop, "utmi_wide") ||
 		     !strcmp(prop, "utmi"))) {
-		/* Set UTMI_PHY_EN, REFSEL to 48MHZ */
+		u32 refsel;
+
+		if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+			refsel = CONTROL_REFSEL_24MHZ;
+		else
+			refsel = CONTROL_REFSEL_48MHZ;
+		/* Set UTMI_PHY_EN and REFSEL */
 		out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
-				CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ);
+				CONTROL_UTMI_PHY_EN | refsel);
 	/* Using external UPLI PHY */
 	} else if (prop && !strcmp(prop, "ulpi")) {
 		/* Set PHY_CLK_SEL to ULPI */
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 28bc6e58a97..7ff29d53dc2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -19,7 +19,6 @@ config MPC8540_ADS
 config MPC8560_ADS
 	bool "Freescale MPC8560 ADS"
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select CPM2
 	help
 	  This option enables support for the MPC 8560 ADS board
@@ -48,7 +47,6 @@ config MPC85xx_DS
 
 config KSI8560
         bool "Emerson KSI8560"
-        select PPC_CPM_NEW_BINDING
         select DEFAULT_UIMAGE
         help
           This option enables support for the Emerson KSI8560 board
@@ -60,14 +58,12 @@ config STX_GP3
 	  board.
 	select CPM2
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 
 config TQM8540
 	bool "TQ Components TQM8540"
 	help
 	  This option enables support for the TQ Components TQM8540 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 
 config TQM8541
@@ -75,7 +71,6 @@ config TQM8541
 	help
 	  This option enables support for the TQ Components TQM8541 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 	select CPM2
 
@@ -84,7 +79,6 @@ config TQM8555
 	help
 	  This option enables support for the TQ Components TQM8555 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 	select CPM2
 
@@ -93,7 +87,6 @@ config TQM8560
 	help
 	  This option enables support for the TQ Components TQM8560 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 	select CPM2
 
@@ -106,7 +99,6 @@ config SBC8548
 config SBC8560
 	bool "Wind River SBC8560"
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING if CPM2
 	help
 	  This option enables support for the Wind River SBC8560 board
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 4e030509611..3582c841844 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -165,7 +165,7 @@ static void __init init_ioports(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
-		struct cpm_pin *pin = &mpc8560_ads_pins[i];
+		const struct cpm_pin *pin = &mpc8560_ads_pins[i];
 		cpm2_set_pin(pin->port, pin->pin, pin->flags);
 	}
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 2865d019afc..dfd8b4ad9b2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -183,6 +184,18 @@ static int __init mpc8544_ds_probe(void)
 	}
 }
 
+static struct of_device_id mpc85xxds_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{},
+};
+
+static int __init mpc85xxds_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
+}
+machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
+
 /*
  * Called very early, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 21d113536b8..7442c58d44f 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -11,6 +11,12 @@ config MPC8641_HPCN
 	help
 	  This option enables support for the MPC8641 HPCN board.
 
+config SBC8641D
+	bool "Wind River SBC8641D"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the WRS SBC8641D board.
+
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
@@ -24,7 +30,7 @@ config MPC8641
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
-	default y if MPC8641_HPCN
+	default y if MPC8641_HPCN || SBC8641D
 
 config MPC8610
 	bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index c96706327ea..1b9b4a9b252 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -4,4 +4,5 @@
 
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
+obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 0b07485641f..18b8ebe930d 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -52,7 +52,7 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-void __init
+static void __init
 mpc86xx_hpcd_init_irq(void)
 {
 	struct mpic *mpic1;
@@ -200,7 +200,7 @@ static int __init mpc86xx_hpcd_probe(void)
 	return 0;
 }
 
-long __init
+static long __init
 mpc86xx_time_init(void)
 {
 	unsigned int temp;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index cfbe8c52e26..f947f555fd4 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -55,7 +55,7 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
 }
 #endif	/* CONFIG_PCI */
 
-void __init
+static void __init
 mpc86xx_hpcn_init_irq(void)
 {
 	struct mpic *mpic1;
@@ -162,7 +162,7 @@ mpc86xx_hpcn_setup_arch(void)
 }
 
 
-void
+static void
 mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *root;
@@ -190,13 +190,19 @@ static int __init mpc86xx_hpcn_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "mpc86xx"))
+	if (of_flat_dt_is_compatible(root, "fsl,mpc8641hpcn"))
 		return 1;	/* Looks good */
 
+	/* Be nice and don't give silent boot death.  Delete this in 2.6.27 */
+	if (of_flat_dt_is_compatible(root, "mpc86xx")) {
+		pr_warning("WARNING: your dts/dtb is old. You must update before the next kernel release\n");
+		return 1;
+	}
+
 	return 0;
 }
 
-long __init
+static long __init
 mpc86xx_time_init(void)
 {
 	unsigned int temp;
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
new file mode 100644
index 00000000000..510a06ef0b5
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -0,0 +1,164 @@
+/*
+ * SBC8641D board specific routines
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * By Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the 8641 HPCN support by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+static void __init
+sbc8641_init_irq(void)
+{
+	struct mpic *mpic1;
+	struct device_node *np;
+	struct resource res;
+
+	/* Determine PIC address. */
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL)
+		return;
+	of_address_to_resource(np, 0, &res);
+
+	/* Alloc mpic structure and per isu has 16 INT entries. */
+	mpic1 = mpic_alloc(np, res.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			0, 256, " MPIC     ");
+	of_node_put(np);
+	BUG_ON(mpic1 == NULL);
+
+	mpic_init(mpic1);
+}
+
+static void __init
+sbc8641_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("sbc8641_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie")
+		fsl_add_bridge(np, 0);
+#endif
+
+	printk("SBC8641 board from Wind River\n");
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+}
+
+
+static void
+sbc8641_show_cpuinfo(struct seq_file *m)
+{
+	struct device_node *root;
+	uint memsize = total_memory;
+	const char *model = "";
+	uint svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: Wind River Systems\n");
+
+	root = of_find_node_by_path("/");
+	if (root)
+		model = of_get_property(root, "model", NULL);
+	seq_printf(m, "Machine\t\t: %s\n", model);
+	of_node_put(root);
+
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init sbc8641_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "wind,sbc8641"))
+		return 1;	/* Looks good */
+
+	return 0;
+}
+
+static long __init
+mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	asm volatile("isync");
+
+	return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(sbc8641, declare_of_platform_devices);
+
+define_machine(sbc8641) {
+	.name			= "SBC8641D",
+	.probe			= sbc8641_probe,
+	.setup_arch		= sbc8641_setup_arch,
+	.init_IRQ		= sbc8641_init_irq,
+	.show_cpuinfo		= sbc8641_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.time_init		= mpc86xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 7fd224ca233..6fc849e51e4 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -18,7 +18,6 @@ config MPC8XXFADS
 config MPC86XADS
 	bool "MPC86XADS"
 	select CPM1
-	select PPC_CPM_NEW_BINDING
 	help
 	  MPC86x Application Development System by Freescale Semiconductor.
 	  The MPC86xADS is meant to serve as a platform for s/w and h/w
@@ -27,7 +26,6 @@ config MPC86XADS
 config MPC885ADS
 	bool "MPC885ADS"
 	select CPM1
-	select PPC_CPM_NEW_BINDING
 	help
 	  Freescale Semiconductor MPC885 Application Development System (ADS).
 	  Also known as DUET.
@@ -37,7 +35,6 @@ config MPC885ADS
 config PPC_EP88XC
 	bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
 	select CPM1
-	select PPC_CPM_NEW_BINDING
 	help
 	  This enables support for the Embedded Planet EP88xC board.
 
@@ -47,7 +44,6 @@ config PPC_EP88XC
 config PPC_ADDER875
 	bool "Analogue & Micro Adder 875"
 	select CPM1
-	select PPC_CPM_NEW_BINDING
 	select REDBOOT
 	help
 	  This enables support for the Analogue & Micro Adder 875
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index a578b966ecb..f38c50b4ce5 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -290,13 +290,7 @@ config CPM2
 config PPC_CPM_NEW_BINDING
 	bool
 	depends on CPM1 || CPM2
-	help
-	  Select this if your board has been converted to use the new
-	  device tree bindings for CPM, and no longer needs the
-	  ioport callbacks or the platform device glue code.
-
-	  The fs_enet and cpm_uart drivers will be built as
-	  of_platform devices.
+	default y
 
 config AXON_RAM
 	tristate "Axon DDR2 memory device driver"
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 851a0be7194..6d386d0071a 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
+obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 3eceeb5f3ee..58292a086c1 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -44,9 +44,6 @@
 
 #define CPM_MAP_SIZE    (0x4000)
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static void m8xx_cpm_dpinit(void);
-#endif
 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
 immap_t __iomem *mpc8xx_immr;
 static cpic8xx_t __iomem *cpic_reg;
@@ -229,12 +226,7 @@ void __init cpm_reset(void)
 	out_be32(&siu_conf->sc_sdcr, 1);
 	immr_unmap(siu_conf);
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	cpm_muram_init();
-#else
-	/* Reclaim the DP memory for our use. */
-	m8xx_cpm_dpinit();
-#endif
 }
 
 static DEFINE_SPINLOCK(cmd_lock);
@@ -293,110 +285,6 @@ cpm_setbrg(uint brg, uint rate)
 			      CPM_BRG_EN | CPM_BRG_DIV16);
 }
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/*
- * 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up...
- */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-#define CPM_DPMEM_ALIGNMENT	8
-static u8 __iomem *dpram_vbase;
-static phys_addr_t dpram_pbase;
-
-static void m8xx_cpm_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	dpram_vbase = cpmp->cp_dpmem;
-	dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem);
-
-	/* Initialize the info header */
-	rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/*
-	 * Attach the usable dpmem area.
-	 * XXX: This is actually crap.  CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE are a subset of the available dparm.  It varies
-	 * with the processor and the microcode patches applied / activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/*
- * Allocate the requested size worth of DP memory.
- * This function returns an offset into the DPRAM area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return (uint)start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)(dpram_vbase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-
-uint cpm_dpram_phys(u8 *addr)
-{
-	return (dpram_pbase + (uint)(addr - dpram_vbase));
-}
-EXPORT_SYMBOL(cpm_dpram_phys);
-#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
-
 struct cpm_ioport16 {
 	__be16 dir, par, odr_sor, dat, intr;
 	__be16 res[3];
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index fa70ee31349..5a6c5dfc53e 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -46,10 +46,6 @@
 
 #include <sysdev/fsl_soc.h>
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static void cpm2_dpinit(void);
-#endif
-
 cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
 
 /* We allocate this here because it is used almost exclusively for
@@ -71,15 +67,17 @@ void __init cpm2_reset(void)
 
 	/* Reclaim the DP memory for our use.
 	 */
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	cpm_muram_init();
-#else
-	cpm2_dpinit();
-#endif
 
 	/* Tell everyone where the comm processor resides.
 	 */
 	cpmp = &cpm2_immr->im_cpm;
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
+	/* Reset the CPM.
+	 */
+	cpm_command(CPM_CR_RST, 0);
+#endif
 }
 
 static DEFINE_SPINLOCK(cmd_lock);
@@ -347,95 +345,6 @@ int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
 	return ret;
 }
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-static u8 __iomem *im_dprambase;
-
-static void cpm2_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	/* initialize the info header */
-	rh_init(&cpm_dpmem_info, 1,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	im_dprambase = cpm2_immr;
-
-	/* Attach the usable dpmem area */
-	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
-	 * varies with the processor and the microcode patches activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/* This function returns an index into the DPRAM area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return (uint)start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-/* not sure if this is ever needed */
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)(im_dprambase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
-
 struct cpm2_ioports {
 	u32 dir, par, sor, odr, dat;
 	u32 res[3];
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 165981c8778..cb7df2dce44 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -58,7 +58,6 @@ void __init udbg_init_cpm(void)
 }
 #endif
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static spinlock_t cpm_muram_lock;
 static rh_block_t cpm_boot_muram_rh_block[16];
 static rh_info_t cpm_muram_info;
@@ -199,5 +198,3 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
 	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
 }
 EXPORT_SYMBOL(cpm_muram_dma);
-
-#endif /* CONFIG_PPC_CPM_NEW_BINDING */
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
new file mode 100644
index 00000000000..422c8faef59
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -0,0 +1,129 @@
+/*
+ * Freescale LBC and UPM routines.
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <asm/fsl_lbc.h>
+
+spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
+
+struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+EXPORT_SYMBOL(fsl_lbc_regs);
+
+static char __initdata *compat_lbc[] = {
+	"fsl,pq2-localbus",
+	"fsl,pq2pro-localbus",
+	"fsl,pq3-localbus",
+	"fsl,elbc",
+};
+
+static int __init fsl_lbc_init(void)
+{
+	struct device_node *lbus;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) {
+		lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]);
+		if (lbus)
+			goto found;
+	}
+	return -ENODEV;
+
+found:
+	fsl_lbc_regs = of_iomap(lbus, 0);
+	of_node_put(lbus);
+	if (!fsl_lbc_regs)
+		return -ENOMEM;
+	return 0;
+}
+arch_initcall(fsl_lbc_init);
+
+/**
+ * fsl_lbc_find - find Localbus bank
+ * @addr_base:	base address of the memory bank
+ *
+ * This function walks LBC banks comparing "Base address" field of the BR
+ * registers with the supplied addr_base argument. When bases match this
+ * function returns bank number (starting with 0), otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_lbc_find(phys_addr_t addr_base)
+{
+	int i;
+
+	if (!fsl_lbc_regs)
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) {
+		__be32 br = in_be32(&fsl_lbc_regs->bank[i].br);
+		__be32 or = in_be32(&fsl_lbc_regs->bank[i].or);
+
+		if (br & BR_V && (br & or & BR_BA) == addr_base)
+			return i;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(fsl_lbc_find);
+
+/**
+ * fsl_upm_find - find pre-programmed UPM via base address
+ * @addr_base:	base address of the memory bank controlled by the UPM
+ * @upm:	pointer to the allocated fsl_upm structure
+ *
+ * This function fills fsl_upm structure so you can use it with the rest of
+ * UPM API. On success this function returns 0, otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm)
+{
+	int bank;
+	__be32 br;
+
+	bank = fsl_lbc_find(addr_base);
+	if (bank < 0)
+		return bank;
+
+	br = in_be32(&fsl_lbc_regs->bank[bank].br);
+
+	switch (br & BR_MSEL) {
+	case BR_MS_UPMA:
+		upm->mxmr = &fsl_lbc_regs->mamr;
+		break;
+	case BR_MS_UPMB:
+		upm->mxmr = &fsl_lbc_regs->mbmr;
+		break;
+	case BR_MS_UPMC:
+		upm->mxmr = &fsl_lbc_regs->mcmr;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (br & BR_PS) {
+	case BR_PS_8:
+		upm->width = 8;
+		break;
+	case BR_PS_16:
+		upm->width = 16;
+		break;
+	case BR_PS_32:
+		upm->width = 32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(fsl_upm_find);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 2c5388ce902..b6d6bdae95f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -75,6 +75,33 @@ phys_addr_t get_immrbase(void)
 
 EXPORT_SYMBOL(get_immrbase);
 
+static u32 sysfreq = -1;
+
+u32 fsl_get_sys_freq(void)
+{
+	struct device_node *soc;
+	const u32 *prop;
+	int size;
+
+	if (sysfreq != -1)
+		return sysfreq;
+
+	soc = of_find_node_by_type(NULL, "soc");
+	if (!soc)
+		return -1;
+
+	prop = of_get_property(soc, "clock-frequency", &size);
+	if (!prop || size != sizeof(*prop) || *prop == 0)
+		prop = of_get_property(soc, "bus-frequency", &size);
+
+	if (prop && size == sizeof(*prop))
+		sysfreq = *prop;
+
+	of_node_put(soc);
+	return sysfreq;
+}
+EXPORT_SYMBOL(fsl_get_sys_freq);
+
 #if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
 
 static u32 brgfreq = -1;
@@ -516,9 +543,9 @@ arch_initcall(fsl_i2c_of_init);
 static int __init mpc83xx_wdt_init(void)
 {
 	struct resource r;
-	struct device_node *soc, *np;
+	struct device_node *np;
 	struct platform_device *dev;
-	const unsigned int *freq;
+	u32 freq = fsl_get_sys_freq();
 	int ret;
 
 	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
@@ -528,19 +555,6 @@ static int __init mpc83xx_wdt_init(void)
 		goto nodev;
 	}
 
-	soc = of_find_node_by_type(NULL, "soc");
-
-	if (!soc) {
-		ret = -ENODEV;
-		goto nosoc;
-	}
-
-	freq = of_get_property(soc, "bus-frequency", NULL);
-	if (!freq) {
-		ret = -ENODEV;
-		goto err;
-	}
-
 	memset(&r, 0, sizeof(r));
 
 	ret = of_address_to_resource(np, 0, &r);
@@ -553,20 +567,16 @@ static int __init mpc83xx_wdt_init(void)
 		goto err;
 	}
 
-	ret = platform_device_add_data(dev, freq, sizeof(int));
+	ret = platform_device_add_data(dev, &freq, sizeof(freq));
 	if (ret)
 		goto unreg;
 
-	of_node_put(soc);
 	of_node_put(np);
-
 	return 0;
 
 unreg:
 	platform_device_unregister(dev);
 err:
-	of_node_put(soc);
-nosoc:
 	of_node_put(np);
 nodev:
 	return ret;
@@ -735,547 +745,6 @@ err:
 
 arch_initcall(fsl_usb_of_init);
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-#ifdef CONFIG_CPM2
-
-extern void init_scc_ioports(struct fs_uart_platform_info*);
-
-static const char fcc_regs[] = "fcc_regs";
-static const char fcc_regs_c[] = "fcc_regs_c";
-static const char fcc_pram[] = "fcc_pram";
-static char bus_id[9][BUS_ID_SIZE];
-
-static int __init fs_enet_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *fs_enet_dev;
-	struct resource res;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
-	     i++) {
-		struct resource r[4];
-		struct device_node *phy, *mdio;
-		struct fs_platform_info fs_enet_data;
-		const unsigned int *id, *phy_addr, *phy_irq;
-		const void *mac_addr;
-		const phandle *ph;
-		const char *model;
-
-		memset(r, 0, sizeof(r));
-		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-		r[0].name = fcc_regs;
-
-		ret = of_address_to_resource(np, 1, &r[1]);
-		if (ret)
-			goto err;
-		r[1].name = fcc_pram;
-
-		ret = of_address_to_resource(np, 2, &r[2]);
-		if (ret)
-			goto err;
-		r[2].name = fcc_regs_c;
-		fs_enet_data.fcc_regs_c = r[2].start;
-
-		of_irq_to_resource(np, 0, &r[3]);
-
-		fs_enet_dev =
-		    platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4);
-
-		if (IS_ERR(fs_enet_dev)) {
-			ret = PTR_ERR(fs_enet_dev);
-			goto err;
-		}
-
-		model = of_get_property(np, "model", NULL);
-		if (model == NULL) {
-			ret = -ENODEV;
-			goto unreg;
-		}
-
-		mac_addr = of_get_mac_address(np);
-		if (mac_addr)
-			memcpy(fs_enet_data.macaddr, mac_addr, 6);
-
-		ph = of_get_property(np, "phy-handle", NULL);
-		phy = of_find_node_by_phandle(*ph);
-
-		if (phy == NULL) {
-			ret = -ENODEV;
-			goto unreg;
-		}
-
-		phy_addr = of_get_property(phy, "reg", NULL);
-		fs_enet_data.phy_addr = *phy_addr;
-
-		phy_irq = of_get_property(phy, "interrupts", NULL);
-
-		id = of_get_property(np, "device-id", NULL);
-		fs_enet_data.fs_no = *id;
-		strcpy(fs_enet_data.fs_type, model);
-
-		mdio = of_get_parent(phy);
-                ret = of_address_to_resource(mdio, 0, &res);
-                if (ret) {
-                        of_node_put(phy);
-                        of_node_put(mdio);
-                        goto unreg;
-                }
-
-		fs_enet_data.clk_rx = *((u32 *)of_get_property(np,
-						"rx-clock", NULL));
-		fs_enet_data.clk_tx = *((u32 *)of_get_property(np,
-						"tx-clock", NULL));
-
-		if (strstr(model, "FCC")) {
-			int fcc_index = *id - 1;
-			const unsigned char *mdio_bb_prop;
-
-			fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0);
-			fs_enet_data.rx_ring = 32;
-			fs_enet_data.tx_ring = 32;
-			fs_enet_data.rx_copybreak = 240;
-			fs_enet_data.use_napi = 0;
-			fs_enet_data.napi_weight = 17;
-			fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index);
-			fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index);
-			fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index);
-
-			snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x",
-							(u32)res.start, fs_enet_data.phy_addr);
-			fs_enet_data.bus_id = (char*)&bus_id[(*id)];
-			fs_enet_data.init_ioports = init_fcc_ioports;
-
-			mdio_bb_prop = of_get_property(phy, "bitbang", NULL);
-			if (mdio_bb_prop) {
-				struct platform_device *fs_enet_mdio_bb_dev;
-				struct fs_mii_bb_platform_info fs_enet_mdio_bb_data;
-
-				fs_enet_mdio_bb_dev =
-					platform_device_register_simple("fsl-bb-mdio",
-							i, NULL, 0);
-				memset(&fs_enet_mdio_bb_data, 0,
-						sizeof(struct fs_mii_bb_platform_info));
-				fs_enet_mdio_bb_data.mdio_dat.bit =
-					mdio_bb_prop[0];
-				fs_enet_mdio_bb_data.mdio_dir.bit =
-					mdio_bb_prop[1];
-				fs_enet_mdio_bb_data.mdc_dat.bit =
-					mdio_bb_prop[2];
-				fs_enet_mdio_bb_data.mdio_port =
-					mdio_bb_prop[3];
-				fs_enet_mdio_bb_data.mdc_port =
-					mdio_bb_prop[4];
-				fs_enet_mdio_bb_data.delay =
-					mdio_bb_prop[5];
-
-				fs_enet_mdio_bb_data.irq[0] = phy_irq[0];
-				fs_enet_mdio_bb_data.irq[1] = -1;
-				fs_enet_mdio_bb_data.irq[2] = -1;
-				fs_enet_mdio_bb_data.irq[3] = phy_irq[0];
-				fs_enet_mdio_bb_data.irq[31] = -1;
-
-				fs_enet_mdio_bb_data.mdio_dat.offset =
-					(u32)&cpm2_immr->im_ioport.iop_pdatc;
-				fs_enet_mdio_bb_data.mdio_dir.offset =
-					(u32)&cpm2_immr->im_ioport.iop_pdirc;
-				fs_enet_mdio_bb_data.mdc_dat.offset =
-					(u32)&cpm2_immr->im_ioport.iop_pdatc;
-
-				ret = platform_device_add_data(
-						fs_enet_mdio_bb_dev,
-						&fs_enet_mdio_bb_data,
-						sizeof(struct fs_mii_bb_platform_info));
-				if (ret)
-					goto unreg;
-			}
-
-			of_node_put(phy);
-			of_node_put(mdio);
-
-			ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
-						     sizeof(struct
-							    fs_platform_info));
-			if (ret)
-				goto unreg;
-		}
-	}
-	return 0;
-
-unreg:
-	platform_device_unregister(fs_enet_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fs_enet_of_init);
-
-static const char scc_regs[] = "regs";
-static const char scc_pram[] = "pram";
-
-static int __init cpm_uart_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *cpm_uart_dev;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
-	     i++) {
-		struct resource r[3];
-		struct fs_uart_platform_info cpm_uart_data;
-		const int *id;
-		const char *model;
-
-		memset(r, 0, sizeof(r));
-		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		r[0].name = scc_regs;
-
-		ret = of_address_to_resource(np, 1, &r[1]);
-		if (ret)
-			goto err;
-		r[1].name = scc_pram;
-
-		of_irq_to_resource(np, 0, &r[2]);
-
-		cpm_uart_dev =
-		    platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3);
-
-		if (IS_ERR(cpm_uart_dev)) {
-			ret = PTR_ERR(cpm_uart_dev);
-			goto err;
-		}
-
-		id = of_get_property(np, "device-id", NULL);
-		cpm_uart_data.fs_no = *id;
-
-		model = of_get_property(np, "model", NULL);
-		strcpy(cpm_uart_data.fs_type, model);
-
-		cpm_uart_data.uart_clk = ppc_proc_freq;
-
-		cpm_uart_data.tx_num_fifo = 4;
-		cpm_uart_data.tx_buf_size = 32;
-		cpm_uart_data.rx_num_fifo = 4;
-		cpm_uart_data.rx_buf_size = 32;
-		cpm_uart_data.clk_rx = *((u32 *)of_get_property(np,
-						"rx-clock", NULL));
-		cpm_uart_data.clk_tx = *((u32 *)of_get_property(np,
-						"tx-clock", NULL));
-
-		ret =
-		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
-					     sizeof(struct
-						    fs_uart_platform_info));
-		if (ret)
-			goto unreg;
-	}
-
-	return 0;
-
-unreg:
-	platform_device_unregister(cpm_uart_dev);
-err:
-	return ret;
-}
-
-arch_initcall(cpm_uart_of_init);
-#endif /* CONFIG_CPM2 */
-
-#ifdef CONFIG_8xx
-
-extern void init_scc_ioports(struct fs_platform_info*);
-extern int platform_device_skip(const char *model, int id);
-
-static int __init fs_enet_mdio_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *mdio_dev;
-	struct resource res;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "mdio", "fs_enet")) != NULL;
-	     i++) {
-		struct fs_mii_fec_platform_info mdio_data;
-
-		memset(&res, 0, sizeof(res));
-		memset(&mdio_data, 0, sizeof(mdio_data));
-
-		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
-			goto err;
-
-		mdio_dev =
-		    platform_device_register_simple("fsl-cpm-fec-mdio",
-						    res.start, &res, 1);
-		if (IS_ERR(mdio_dev)) {
-			ret = PTR_ERR(mdio_dev);
-			goto err;
-		}
-
-		mdio_data.mii_speed = ((((ppc_proc_freq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-
-		ret =
-		    platform_device_add_data(mdio_dev, &mdio_data,
-					     sizeof(struct fs_mii_fec_platform_info));
-		if (ret)
-			goto unreg;
-	}
-	return 0;
-
-unreg:
-	platform_device_unregister(mdio_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fs_enet_mdio_of_init);
-
-static const char *enet_regs = "regs";
-static const char *enet_pram = "pram";
-static const char *enet_irq = "interrupt";
-static char bus_id[9][BUS_ID_SIZE];
-
-static int __init fs_enet_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *fs_enet_dev = NULL;
-	struct resource res;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
-	     i++) {
-		struct resource r[4];
-		struct device_node *phy = NULL, *mdio = NULL;
-		struct fs_platform_info fs_enet_data;
-		const unsigned int *id;
-		const unsigned int *phy_addr;
-		const void *mac_addr;
-		const phandle *ph;
-		const char *model;
-
-		memset(r, 0, sizeof(r));
-		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
-
-		model = of_get_property(np, "model", NULL);
-		if (model == NULL) {
-			ret = -ENODEV;
-			goto unreg;
-		}
-
-		id = of_get_property(np, "device-id", NULL);
-		fs_enet_data.fs_no = *id;
-
-		if (platform_device_skip(model, *id))
-			continue;
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-		r[0].name = enet_regs;
-
-		mac_addr = of_get_mac_address(np);
-		if (mac_addr)
-			memcpy(fs_enet_data.macaddr, mac_addr, 6);
-
-		ph = of_get_property(np, "phy-handle", NULL);
-		if (ph != NULL)
-			phy = of_find_node_by_phandle(*ph);
-
-		if (phy != NULL) {
-			phy_addr = of_get_property(phy, "reg", NULL);
-			fs_enet_data.phy_addr = *phy_addr;
-			fs_enet_data.has_phy = 1;
-
-			mdio = of_get_parent(phy);
-			ret = of_address_to_resource(mdio, 0, &res);
-			if (ret) {
-				of_node_put(phy);
-				of_node_put(mdio);
-                                goto unreg;
-			}
-		}
-
-		model = of_get_property(np, "model", NULL);
-		strcpy(fs_enet_data.fs_type, model);
-
-		if (strstr(model, "FEC")) {
-			r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
-			r[1].flags = IORESOURCE_IRQ;
-			r[1].name = enet_irq;
-
-			fs_enet_dev =
-				    platform_device_register_simple("fsl-cpm-fec", i, &r[0], 2);
-
-			if (IS_ERR(fs_enet_dev)) {
-				ret = PTR_ERR(fs_enet_dev);
-				goto err;
-			}
-
-			fs_enet_data.rx_ring = 128;
-			fs_enet_data.tx_ring = 16;
-			fs_enet_data.rx_copybreak = 240;
-			fs_enet_data.use_napi = 1;
-			fs_enet_data.napi_weight = 17;
-
-			snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%x:%02x",
-							(u32)res.start, fs_enet_data.phy_addr);
-			fs_enet_data.bus_id = (char*)&bus_id[i];
-			fs_enet_data.init_ioports = init_fec_ioports;
-		}
-		if (strstr(model, "SCC")) {
-			ret = of_address_to_resource(np, 1, &r[1]);
-			if (ret)
-				goto err;
-			r[1].name = enet_pram;
-
-			r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
-			r[2].flags = IORESOURCE_IRQ;
-			r[2].name = enet_irq;
-
-			fs_enet_dev =
-				    platform_device_register_simple("fsl-cpm-scc", i, &r[0], 3);
-
-			if (IS_ERR(fs_enet_dev)) {
-				ret = PTR_ERR(fs_enet_dev);
-				goto err;
-			}
-
-			fs_enet_data.rx_ring = 64;
-			fs_enet_data.tx_ring = 8;
-			fs_enet_data.rx_copybreak = 240;
-			fs_enet_data.use_napi = 1;
-			fs_enet_data.napi_weight = 17;
-
-			snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%s", "fixed@10:1");
-                        fs_enet_data.bus_id = (char*)&bus_id[i];
-			fs_enet_data.init_ioports = init_scc_ioports;
-		}
-
-		of_node_put(phy);
-		of_node_put(mdio);
-
-		ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
-					     sizeof(struct
-						    fs_platform_info));
-		if (ret)
-			goto unreg;
-	}
-	return 0;
-
-unreg:
-	platform_device_unregister(fs_enet_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fs_enet_of_init);
-
-static int __init fsl_pcmcia_of_init(void)
-{
-	struct device_node *np;
-	/*
-	 * Register all the devices which type is "pcmcia"
-	 */
-	for_each_compatible_node(np, "pcmcia", "fsl,pq-pcmcia")
-		of_platform_device_create(np, "m8xx-pcmcia", NULL);
-	return 0;
-}
-
-arch_initcall(fsl_pcmcia_of_init);
-
-static const char *smc_regs = "regs";
-static const char *smc_pram = "pram";
-
-static int __init cpm_smc_uart_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *cpm_uart_dev;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
-	     i++) {
-		struct resource r[3];
-		struct fs_uart_platform_info cpm_uart_data;
-		const int *id;
-		const char *model;
-
-		memset(r, 0, sizeof(r));
-		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		r[0].name = smc_regs;
-
-		ret = of_address_to_resource(np, 1, &r[1]);
-		if (ret)
-			goto err;
-		r[1].name = smc_pram;
-
-		r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
-		r[2].flags = IORESOURCE_IRQ;
-
-		cpm_uart_dev =
-		    platform_device_register_simple("fsl-cpm-smc:uart", i, &r[0], 3);
-
-		if (IS_ERR(cpm_uart_dev)) {
-			ret = PTR_ERR(cpm_uart_dev);
-			goto err;
-		}
-
-		model = of_get_property(np, "model", NULL);
-		strcpy(cpm_uart_data.fs_type, model);
-
-		id = of_get_property(np, "device-id", NULL);
-		cpm_uart_data.fs_no = *id;
-		cpm_uart_data.uart_clk = ppc_proc_freq;
-
-		cpm_uart_data.tx_num_fifo = 4;
-		cpm_uart_data.tx_buf_size = 32;
-		cpm_uart_data.rx_num_fifo = 4;
-		cpm_uart_data.rx_buf_size = 32;
-
-		ret =
-		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
-					     sizeof(struct
-						    fs_uart_platform_info));
-		if (ret)
-			goto unreg;
-	}
-
-	return 0;
-
-unreg:
-	platform_device_unregister(cpm_uart_dev);
-err:
-	return ret;
-}
-
-arch_initcall(cpm_smc_uart_of_init);
-
-#endif /* CONFIG_8xx */
-#endif /* CONFIG_PPC_CPM_NEW_BINDING */
-
 static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
 				   struct spi_board_info *board_infos,
 				   unsigned int num_board_infos,
@@ -1371,25 +840,9 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 	sysclk = get_brgfreq();
 #endif
 	if (sysclk == -1) {
-		struct device_node *np;
-		const u32 *freq;
-		int size;
-
-		np = of_find_node_by_type(NULL, "soc");
-		if (!np)
+		sysclk = fsl_get_sys_freq();
+		if (sysclk == -1)
 			return -ENODEV;
-
-		freq = of_get_property(np, "clock-frequency", &size);
-		if (!freq || size != sizeof(*freq) || *freq == 0) {
-			freq = of_get_property(np, "bus-frequency", &size);
-			if (!freq || size != sizeof(*freq) || *freq == 0) {
-				of_node_put(np);
-				return -ENODEV;
-			}
-		}
-
-		sysclk = *freq;
-		of_node_put(np);
 	}
 
 	ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 63e7db30a4c..74c4a9657b3 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -7,6 +7,7 @@
 extern phys_addr_t get_immrbase(void);
 extern u32 get_brgfreq(void);
 extern u32 get_baudrate(void);
+extern u32 fsl_get_sys_freq(void);
 
 struct spi_board_info;
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index cc81fd1141b..cff550eec7e 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -55,7 +55,7 @@ struct qe_snum {
 /* We allocate this here because it is used almost exclusively for
  * the communication processor devices.
  */
-struct qe_immap *qe_immr = NULL;
+struct qe_immap __iomem *qe_immr;
 EXPORT_SYMBOL(qe_immr);
 
 static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
@@ -156,7 +156,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
  */
 static unsigned int brg_clk = 0;
 
-unsigned int get_brg_clk(void)
+unsigned int qe_get_brg_clk(void)
 {
 	struct device_node *qe;
 	unsigned int size;
@@ -180,6 +180,7 @@ unsigned int get_brg_clk(void)
 
 	return brg_clk;
 }
+EXPORT_SYMBOL(qe_get_brg_clk);
 
 /* Program the BRG to the given sampling rate and multiplier
  *
@@ -197,7 +198,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
 	if ((brg < QE_BRG1) || (brg > QE_BRG16))
 		return -EINVAL;
 
-	divisor = get_brg_clk() / (rate * multiplier);
+	divisor = qe_get_brg_clk() / (rate * multiplier);
 
 	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
 		div16 = QE_BRGC_DIV16;
@@ -415,12 +416,6 @@ void qe_muram_dump(void)
 }
 EXPORT_SYMBOL(qe_muram_dump);
 
-void *qe_muram_addr(unsigned long offset)
-{
-	return (void *)&qe_immr->muram[offset];
-}
-EXPORT_SYMBOL(qe_muram_addr);
-
 /* The maximum number of RISCs we support */
 #define MAX_QE_RISC     2
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index 736c1fcc950..93916a48afe 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -22,6 +22,7 @@
 #include <linux/ioport.h>
 
 #include <asm/io.h>
+#include <asm/qe.h>
 #include <asm/prom.h>
 #include <sysdev/fsl_soc.h>
 
@@ -41,7 +42,7 @@ struct port_regs {
 #endif
 };
 
-static struct port_regs *par_io = NULL;
+static struct port_regs __iomem *par_io;
 static int num_par_io_ports = 0;
 
 int par_io_init(struct device_node *np)
@@ -165,7 +166,7 @@ int par_io_of_config(struct device_node *np)
 	}
 
 	ph = of_get_property(np, "pio-handle", NULL);
-	if (ph == 0) {
+	if (ph == NULL) {
 		printk(KERN_ERR "pio-handle not available \n");
 		return -1;
 	}
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index b025dfe0b27..378b7aa6381 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -36,207 +36,12 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-
+#include <asm/fsl_lbc.h>
 
 #define MAX_BANKS 8
 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
 #define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
 
-struct elbc_bank {
-	__be32 br;             /**< Base Register  */
-#define BR_BA           0xFFFF8000
-#define BR_BA_SHIFT             15
-#define BR_PS           0x00001800
-#define BR_PS_SHIFT             11
-#define BR_PS_8         0x00000800  /* Port Size 8 bit */
-#define BR_PS_16        0x00001000  /* Port Size 16 bit */
-#define BR_PS_32        0x00001800  /* Port Size 32 bit */
-#define BR_DECC         0x00000600
-#define BR_DECC_SHIFT            9
-#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
-#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
-#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
-#define BR_WP           0x00000100
-#define BR_WP_SHIFT              8
-#define BR_MSEL         0x000000E0
-#define BR_MSEL_SHIFT            5
-#define BR_MS_GPCM      0x00000000  /* GPCM */
-#define BR_MS_FCM       0x00000020  /* FCM */
-#define BR_MS_SDRAM     0x00000060  /* SDRAM */
-#define BR_MS_UPMA      0x00000080  /* UPMA */
-#define BR_MS_UPMB      0x000000A0  /* UPMB */
-#define BR_MS_UPMC      0x000000C0  /* UPMC */
-#define BR_V            0x00000001
-#define BR_V_SHIFT               0
-#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
-
-	__be32 or;             /**< Base Register  */
-#define OR0 0x5004
-#define OR1 0x500C
-#define OR2 0x5014
-#define OR3 0x501C
-#define OR4 0x5024
-#define OR5 0x502C
-#define OR6 0x5034
-#define OR7 0x503C
-
-#define OR_FCM_AM               0xFFFF8000
-#define OR_FCM_AM_SHIFT                 15
-#define OR_FCM_BCTLD            0x00001000
-#define OR_FCM_BCTLD_SHIFT              12
-#define OR_FCM_PGS              0x00000400
-#define OR_FCM_PGS_SHIFT                10
-#define OR_FCM_CSCT             0x00000200
-#define OR_FCM_CSCT_SHIFT                9
-#define OR_FCM_CST              0x00000100
-#define OR_FCM_CST_SHIFT                 8
-#define OR_FCM_CHT              0x00000080
-#define OR_FCM_CHT_SHIFT                 7
-#define OR_FCM_SCY              0x00000070
-#define OR_FCM_SCY_SHIFT                 4
-#define OR_FCM_SCY_1            0x00000010
-#define OR_FCM_SCY_2            0x00000020
-#define OR_FCM_SCY_3            0x00000030
-#define OR_FCM_SCY_4            0x00000040
-#define OR_FCM_SCY_5            0x00000050
-#define OR_FCM_SCY_6            0x00000060
-#define OR_FCM_SCY_7            0x00000070
-#define OR_FCM_RST              0x00000008
-#define OR_FCM_RST_SHIFT                 3
-#define OR_FCM_TRLX             0x00000004
-#define OR_FCM_TRLX_SHIFT                2
-#define OR_FCM_EHTR             0x00000002
-#define OR_FCM_EHTR_SHIFT                1
-};
-
-struct elbc_regs {
-	struct elbc_bank bank[8];
-	u8 res0[0x28];
-	__be32 mar;             /**< UPM Address Register */
-	u8 res1[0x4];
-	__be32 mamr;            /**< UPMA Mode Register */
-	__be32 mbmr;            /**< UPMB Mode Register */
-	__be32 mcmr;            /**< UPMC Mode Register */
-	u8 res2[0x8];
-	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
-	__be32 mdr;             /**< UPM Data Register */
-	u8 res3[0x4];
-	__be32 lsor;            /**< Special Operation Initiation Register */
-	__be32 lsdmr;           /**< SDRAM Mode Register */
-	u8 res4[0x8];
-	__be32 lurt;            /**< UPM Refresh Timer */
-	__be32 lsrt;            /**< SDRAM Refresh Timer */
-	u8 res5[0x8];
-	__be32 ltesr;           /**< Transfer Error Status Register */
-#define LTESR_BM   0x80000000
-#define LTESR_FCT  0x40000000
-#define LTESR_PAR  0x20000000
-#define LTESR_WP   0x04000000
-#define LTESR_ATMW 0x00800000
-#define LTESR_ATMR 0x00400000
-#define LTESR_CS   0x00080000
-#define LTESR_CC   0x00000001
-#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
-	__be32 ltedr;           /**< Transfer Error Disable Register */
-	__be32 lteir;           /**< Transfer Error Interrupt Register */
-	__be32 lteatr;          /**< Transfer Error Attributes Register */
-	__be32 ltear;           /**< Transfer Error Address Register */
-	u8 res6[0xC];
-	__be32 lbcr;            /**< Configuration Register */
-#define LBCR_LDIS  0x80000000
-#define LBCR_LDIS_SHIFT    31
-#define LBCR_BCTLC 0x00C00000
-#define LBCR_BCTLC_SHIFT   22
-#define LBCR_AHD   0x00200000
-#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT   17
-#define LBCR_EPAR  0x00010000
-#define LBCR_EPAR_SHIFT    16
-#define LBCR_BMT   0x0000FF00
-#define LBCR_BMT_SHIFT      8
-#define LBCR_INIT  0x00040000
-	__be32 lcrr;            /**< Clock Ratio Register */
-#define LCRR_DBYP    0x80000000
-#define LCRR_DBYP_SHIFT      31
-#define LCRR_BUFCMDC 0x30000000
-#define LCRR_BUFCMDC_SHIFT   28
-#define LCRR_ECL     0x03000000
-#define LCRR_ECL_SHIFT       24
-#define LCRR_EADC    0x00030000
-#define LCRR_EADC_SHIFT      16
-#define LCRR_CLKDIV  0x0000000F
-#define LCRR_CLKDIV_SHIFT     0
-	u8 res7[0x8];
-	__be32 fmr;             /**< Flash Mode Register */
-#define FMR_CWTO     0x0000F000
-#define FMR_CWTO_SHIFT       12
-#define FMR_BOOT     0x00000800
-#define FMR_ECCM     0x00000100
-#define FMR_AL       0x00000030
-#define FMR_AL_SHIFT          4
-#define FMR_OP       0x00000003
-#define FMR_OP_SHIFT          0
-	__be32 fir;             /**< Flash Instruction Register */
-#define FIR_OP0      0xF0000000
-#define FIR_OP0_SHIFT        28
-#define FIR_OP1      0x0F000000
-#define FIR_OP1_SHIFT        24
-#define FIR_OP2      0x00F00000
-#define FIR_OP2_SHIFT        20
-#define FIR_OP3      0x000F0000
-#define FIR_OP3_SHIFT        16
-#define FIR_OP4      0x0000F000
-#define FIR_OP4_SHIFT        12
-#define FIR_OP5      0x00000F00
-#define FIR_OP5_SHIFT         8
-#define FIR_OP6      0x000000F0
-#define FIR_OP6_SHIFT         4
-#define FIR_OP7      0x0000000F
-#define FIR_OP7_SHIFT         0
-#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
-#define FIR_OP_CA    0x1        /* Issue current column address */
-#define FIR_OP_PA    0x2        /* Issue current block+page address */
-#define FIR_OP_UA    0x3        /* Issue user defined address */
-#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
-#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
-#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
-#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
-#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
-#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
-	__be32 fcr;             /**< Flash Command Register */
-#define FCR_CMD0     0xFF000000
-#define FCR_CMD0_SHIFT       24
-#define FCR_CMD1     0x00FF0000
-#define FCR_CMD1_SHIFT       16
-#define FCR_CMD2     0x0000FF00
-#define FCR_CMD2_SHIFT        8
-#define FCR_CMD3     0x000000FF
-#define FCR_CMD3_SHIFT        0
-	__be32 fbar;            /**< Flash Block Address Register */
-#define FBAR_BLK     0x00FFFFFF
-	__be32 fpar;            /**< Flash Page Address Register */
-#define FPAR_SP_PI   0x00007C00
-#define FPAR_SP_PI_SHIFT     10
-#define FPAR_SP_MS   0x00000200
-#define FPAR_SP_CI   0x000001FF
-#define FPAR_SP_CI_SHIFT      0
-#define FPAR_LP_PI   0x0003F000
-#define FPAR_LP_PI_SHIFT     12
-#define FPAR_LP_MS   0x00000800
-#define FPAR_LP_CI   0x000007FF
-#define FPAR_LP_CI_SHIFT      0
-	__be32 fbcr;            /**< Flash Byte Count Register */
-#define FBCR_BC      0x00000FFF
-	u8 res11[0x8];
-	u8 res8[0xF00];
-};
-
 struct fsl_elbc_ctrl;
 
 /* mtd information per set */
@@ -261,7 +66,7 @@ struct fsl_elbc_ctrl {
 
 	/* device info */
 	struct device *dev;
-	struct elbc_regs __iomem *regs;
+	struct fsl_lbc_regs __iomem *regs;
 	int irq;
 	wait_queue_head_t irq_wait;
 	unsigned int irq_status; /* status read from LTESR by irq handler */
@@ -322,7 +127,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	int buf_num;
 
 	ctrl->page = page_addr;
@@ -363,7 +168,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	/* Setup the FMR[OP] to execute without write protection */
 	out_be32(&lbc->fmr, priv->fmr | 3);
@@ -406,7 +211,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	if (priv->page_size) {
 		out_be32(&lbc->fir,
@@ -439,7 +244,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	ctrl->use_mdr = 0;
 
@@ -775,7 +580,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	if (ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
@@ -807,7 +612,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	unsigned int al;
 
 	/* calculate FMR Address Length field */
@@ -922,7 +727,7 @@ static void fsl_elbc_write_page(struct mtd_info *mtd,
 static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 {
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	struct nand_chip *chip = &priv->chip;
 
 	dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
@@ -986,7 +791,7 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
                                struct device_node *node)
 {
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	struct fsl_elbc_mtd *priv;
 	struct resource res;
 #ifdef CONFIG_MTD_PARTITIONS
@@ -1083,7 +888,7 @@ err:
 
 static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
 {
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	/* clear event registers */
 	setbits32(&lbc->ltesr, LTESR_NAND_MASK);
@@ -1128,7 +933,7 @@ static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
 static irqreturn_t fsl_elbc_ctrl_irq(int irqno, void *data)
 {
 	struct fsl_elbc_ctrl *ctrl = data;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	__be32 status = in_be32(&lbc->ltesr) & LTESR_NAND_MASK;
 
 	if (status) {
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 8cc316653a3..ed84182c682 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3852,7 +3852,13 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 
 	ugeth_vdbg("%s: IN", __FUNCTION__);
 
-	prop = of_get_property(np, "device-id", NULL);
+	prop = of_get_property(np, "cell-index", NULL);
+	if (!prop) {
+		prop = of_get_property(np, "device-id", NULL);
+		if (!prop)
+			return -ENODEV;
+	}
+
 	ucc_num = *prop - 1;
 	if ((ucc_num < 0) || (ucc_num > 7))
 		return -ENODEV;
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index c69e654d539..8a48ddb1e86 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -203,9 +203,14 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
 		if ((res.start >= tempres.start) &&
 		    (res.end <= tempres.end)) {
 			/* set this UCC to be the MII master */
-			const u32 *id = of_get_property(tempnp, "device-id", NULL);
-			if (id == NULL)
-				goto bus_register_fail;
+			const u32 *id;
+
+			id = of_get_property(tempnp, "cell-index", NULL);
+			if (!id) {
+				id = of_get_property(tempnp, "device-id", NULL);
+				if (!id)
+					goto bus_register_fail;
+			}
 
 			ucc_set_qe_mux_mii_mng(*id - 1);
 
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 32b9737759c..0cc39f82d7c 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -92,6 +92,9 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR];
 
 /* these are located in their respective files */
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
+void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
+				struct device_node *np);
+void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
 int cpm_uart_init_portdesc(void);
 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
 void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 236af9d3385..a638ba0679a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -966,24 +966,23 @@ static int cpm_uart_init_port(struct device_node *np,
 	if (!mem)
 		return -ENOMEM;
 
-	pram = of_iomap(np, 1);
-	if (!pram) {
-		ret = -ENOMEM;
-		goto out_mem;
-	}
-
 	if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") ||
 	    of_device_is_compatible(np, "fsl,cpm2-scc-uart")) {
 		pinfo->sccp = mem;
-		pinfo->sccup = pram;
+		pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np);
 	} else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
 	           of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
 		pinfo->flags |= FLAG_SMC;
 		pinfo->smcp = mem;
-		pinfo->smcup = pram;
+		pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np);
 	} else {
 		ret = -ENODEV;
-		goto out_pram;
+		goto out_mem;
+	}
+
+	if (!pram) {
+		ret = -ENOMEM;
+		goto out_mem;
 	}
 
 	pinfo->tx_nrfifos = TX_NUM_FIFO;
@@ -1007,7 +1006,7 @@ static int cpm_uart_init_port(struct device_node *np,
 	return cpm_uart_request_port(&pinfo->port);
 
 out_pram:
-	iounmap(pram);
+	cpm_uart_unmap_pram(pinfo, pram);
 out_mem:
 	iounmap(mem);
 	return ret;
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 6ea0366e26a..74f1432bb24 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -45,6 +45,8 @@
 #include <linux/serial_core.h>
 #include <linux/kernel.h>
 
+#include <linux/of.h>
+
 #include "cpm_uart.h"
 
 /**************************************************************/
@@ -54,6 +56,18 @@ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
 	cpm_command(port->command, cmd);
 }
+
+void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
+				struct device_node *np)
+{
+	return of_iomap(np, 1);
+}
+
+void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
+{
+	iounmap(pram);
+}
+
 #else
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index d9af06a791b..bb862e2f54c 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -41,6 +41,9 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/fs_pd.h>
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#include <asm/prom.h>
+#endif
 
 #include <linux/serial_core.h>
 #include <linux/kernel.h>
@@ -54,6 +57,55 @@ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
 	cpm_command(port->command, cmd);
 }
+
+void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
+				struct device_node *np)
+{
+	void __iomem *pram;
+	unsigned long offset;
+	struct resource res;
+	unsigned long len;
+
+	/* Don't remap parameter RAM if it has already been initialized
+	 * during console setup.
+	 */
+	if (IS_SMC(port) && port->smcup)
+		return port->smcup;
+	else if (!IS_SMC(port) && port->sccup)
+		return port->sccup;
+
+	if (of_address_to_resource(np, 1, &res))
+		return NULL;
+
+	len = 1 + res.end - res.start;
+	pram = ioremap(res.start, len);
+	if (!pram)
+		return NULL;
+
+	if (!IS_SMC(port))
+		return pram;
+
+	if (len != 2) {
+		printk(KERN_WARNING "cpm_uart[%d]: device tree references "
+			"SMC pram, using boot loader/wrapper pram mapping. "
+			"Please fix your device tree to reference the pram "
+			"base register instead.\n",
+			port->port.line);
+		return pram;
+	}
+
+	offset = cpm_dpalloc(PROFF_SMC_SIZE, 64);
+	out_be16(pram, offset);
+	iounmap(pram);
+	return cpm_muram_addr(offset);
+}
+
+void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
+{
+	if (!IS_SMC(port))
+		iounmap(pram);
+}
+
 #else
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index e0994f06100..5e4310ccd59 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1270,10 +1270,18 @@ static int ucc_uart_probe(struct of_device *ofdev,
 
 	/* Get the UCC number (device ID) */
 	/* UCCs are numbered 1-7 */
-	iprop = of_get_property(np, "device-id", NULL);
-	if (!iprop || (*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
-		dev_err(&ofdev->dev,
-			"missing or invalid UCC specified in device tree\n");
+	iprop = of_get_property(np, "cell-index", NULL);
+	if (!iprop) {
+		iprop = of_get_property(np, "device-id", NULL);
+		if (!iprop) {
+			dev_err(&ofdev->dev, "UCC is unspecified in "
+				"device tree\n");
+			return -EINVAL;
+		}
+	}
+
+	if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
+		dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop);
 		kfree(qe_port);
 		return -ENODEV;
 	}
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index 77e39dad972..ede38ffe466 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -4,6 +4,20 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 
+/* Opcodes common to CPM1 and CPM2
+*/
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_SET_TIMER	((ushort)0x0008)
+#define CPM_CR_STOP_IDMA	((ushort)0x000b)
+
 /* Buffer descriptors used by many of the CPM protocols. */
 typedef struct cpm_buf_desc {
 	ushort	cbd_sc;		/* Status and Control */
diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h
index b2ebd6ac6da..3df43967800 100644
--- a/include/asm-powerpc/cpm1.h
+++ b/include/asm-powerpc/cpm1.h
@@ -28,19 +28,6 @@
 #define CPM_CR_CHAN	((ushort)0x00f0)
 #define CPM_CR_FLG	((ushort)0x0001)
 
-/* Some commands (there are more...later)
-*/
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
-#define CPM_CR_SET_TIMER	CPM_CR_SET_GADDR
-
 /* Channel numbers.
 */
 #define CPM_CR_CH_SCC1		((ushort)0x0000)
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index b93a53eb55c..4c85ed9cd43 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -71,18 +71,9 @@
 
 #define CPM_CR_FCC_PAGE(x)	(x + 0x04)
 
-/* Some opcodes (there are more...later)
+/* CPM2-specific opcodes (see cpm.h for common opcodes)
 */
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
 #define CPM_CR_START_IDMA	((ushort)0x0009)
-#define CPM_CR_STOP_IDMA	((ushort)0x000b)
 
 #define mk_cr_cmd(PG, SBC, MCN, OP) \
 	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
diff --git a/include/asm-powerpc/fsl_lbc.h b/include/asm-powerpc/fsl_lbc.h
new file mode 100644
index 00000000000..303f5484c05
--- /dev/null
+++ b/include/asm-powerpc/fsl_lbc.h
@@ -0,0 +1,311 @@
+/* Freescale Local Bus Controller
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ *          Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_FSL_LBC_H
+#define __ASM_FSL_LBC_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+struct fsl_lbc_bank {
+	__be32 br;             /**< Base Register  */
+#define BR_BA           0xFFFF8000
+#define BR_BA_SHIFT             15
+#define BR_PS           0x00001800
+#define BR_PS_SHIFT             11
+#define BR_PS_8         0x00000800  /* Port Size 8 bit */
+#define BR_PS_16        0x00001000  /* Port Size 16 bit */
+#define BR_PS_32        0x00001800  /* Port Size 32 bit */
+#define BR_DECC         0x00000600
+#define BR_DECC_SHIFT            9
+#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
+#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
+#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
+#define BR_WP           0x00000100
+#define BR_WP_SHIFT              8
+#define BR_MSEL         0x000000E0
+#define BR_MSEL_SHIFT            5
+#define BR_MS_GPCM      0x00000000  /* GPCM */
+#define BR_MS_FCM       0x00000020  /* FCM */
+#define BR_MS_SDRAM     0x00000060  /* SDRAM */
+#define BR_MS_UPMA      0x00000080  /* UPMA */
+#define BR_MS_UPMB      0x000000A0  /* UPMB */
+#define BR_MS_UPMC      0x000000C0  /* UPMC */
+#define BR_V            0x00000001
+#define BR_V_SHIFT               0
+#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+	__be32 or;             /**< Base Register  */
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_FCM_AM               0xFFFF8000
+#define OR_FCM_AM_SHIFT                 15
+#define OR_FCM_BCTLD            0x00001000
+#define OR_FCM_BCTLD_SHIFT              12
+#define OR_FCM_PGS              0x00000400
+#define OR_FCM_PGS_SHIFT                10
+#define OR_FCM_CSCT             0x00000200
+#define OR_FCM_CSCT_SHIFT                9
+#define OR_FCM_CST              0x00000100
+#define OR_FCM_CST_SHIFT                 8
+#define OR_FCM_CHT              0x00000080
+#define OR_FCM_CHT_SHIFT                 7
+#define OR_FCM_SCY              0x00000070
+#define OR_FCM_SCY_SHIFT                 4
+#define OR_FCM_SCY_1            0x00000010
+#define OR_FCM_SCY_2            0x00000020
+#define OR_FCM_SCY_3            0x00000030
+#define OR_FCM_SCY_4            0x00000040
+#define OR_FCM_SCY_5            0x00000050
+#define OR_FCM_SCY_6            0x00000060
+#define OR_FCM_SCY_7            0x00000070
+#define OR_FCM_RST              0x00000008
+#define OR_FCM_RST_SHIFT                 3
+#define OR_FCM_TRLX             0x00000004
+#define OR_FCM_TRLX_SHIFT                2
+#define OR_FCM_EHTR             0x00000002
+#define OR_FCM_EHTR_SHIFT                1
+};
+
+struct fsl_lbc_regs {
+	struct fsl_lbc_bank bank[8];
+	u8 res0[0x28];
+	__be32 mar;             /**< UPM Address Register */
+	u8 res1[0x4];
+	__be32 mamr;            /**< UPMA Mode Register */
+#define MxMR_OP_NO	(0 << 28) /**< normal operation */
+#define MxMR_OP_WA	(1 << 28) /**< write array */
+#define MxMR_OP_RA	(2 << 28) /**< read array */
+#define MxMR_OP_RP	(3 << 28) /**< run pattern */
+#define MxMR_MAD	0x3f      /**< machine address */
+	__be32 mbmr;            /**< UPMB Mode Register */
+	__be32 mcmr;            /**< UPMC Mode Register */
+	u8 res2[0x8];
+	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
+	__be32 mdr;             /**< UPM Data Register */
+	u8 res3[0x4];
+	__be32 lsor;            /**< Special Operation Initiation Register */
+	__be32 lsdmr;           /**< SDRAM Mode Register */
+	u8 res4[0x8];
+	__be32 lurt;            /**< UPM Refresh Timer */
+	__be32 lsrt;            /**< SDRAM Refresh Timer */
+	u8 res5[0x8];
+	__be32 ltesr;           /**< Transfer Error Status Register */
+#define LTESR_BM   0x80000000
+#define LTESR_FCT  0x40000000
+#define LTESR_PAR  0x20000000
+#define LTESR_WP   0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS   0x00080000
+#define LTESR_CC   0x00000001
+#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+	__be32 ltedr;           /**< Transfer Error Disable Register */
+	__be32 lteir;           /**< Transfer Error Interrupt Register */
+	__be32 lteatr;          /**< Transfer Error Attributes Register */
+	__be32 ltear;           /**< Transfer Error Address Register */
+	u8 res6[0xC];
+	__be32 lbcr;            /**< Configuration Register */
+#define LBCR_LDIS  0x80000000
+#define LBCR_LDIS_SHIFT    31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT   22
+#define LBCR_AHD   0x00200000
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT   17
+#define LBCR_EPAR  0x00010000
+#define LBCR_EPAR_SHIFT    16
+#define LBCR_BMT   0x0000FF00
+#define LBCR_BMT_SHIFT      8
+#define LBCR_INIT  0x00040000
+	__be32 lcrr;            /**< Clock Ratio Register */
+#define LCRR_DBYP    0x80000000
+#define LCRR_DBYP_SHIFT      31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT   28
+#define LCRR_ECL     0x03000000
+#define LCRR_ECL_SHIFT       24
+#define LCRR_EADC    0x00030000
+#define LCRR_EADC_SHIFT      16
+#define LCRR_CLKDIV  0x0000000F
+#define LCRR_CLKDIV_SHIFT     0
+	u8 res7[0x8];
+	__be32 fmr;             /**< Flash Mode Register */
+#define FMR_CWTO     0x0000F000
+#define FMR_CWTO_SHIFT       12
+#define FMR_BOOT     0x00000800
+#define FMR_ECCM     0x00000100
+#define FMR_AL       0x00000030
+#define FMR_AL_SHIFT          4
+#define FMR_OP       0x00000003
+#define FMR_OP_SHIFT          0
+	__be32 fir;             /**< Flash Instruction Register */
+#define FIR_OP0      0xF0000000
+#define FIR_OP0_SHIFT        28
+#define FIR_OP1      0x0F000000
+#define FIR_OP1_SHIFT        24
+#define FIR_OP2      0x00F00000
+#define FIR_OP2_SHIFT        20
+#define FIR_OP3      0x000F0000
+#define FIR_OP3_SHIFT        16
+#define FIR_OP4      0x0000F000
+#define FIR_OP4_SHIFT        12
+#define FIR_OP5      0x00000F00
+#define FIR_OP5_SHIFT         8
+#define FIR_OP6      0x000000F0
+#define FIR_OP6_SHIFT         4
+#define FIR_OP7      0x0000000F
+#define FIR_OP7_SHIFT         0
+#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
+#define FIR_OP_CA    0x1        /* Issue current column address */
+#define FIR_OP_PA    0x2        /* Issue current block+page address */
+#define FIR_OP_UA    0x3        /* Issue user defined address */
+#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
+#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
+	__be32 fcr;             /**< Flash Command Register */
+#define FCR_CMD0     0xFF000000
+#define FCR_CMD0_SHIFT       24
+#define FCR_CMD1     0x00FF0000
+#define FCR_CMD1_SHIFT       16
+#define FCR_CMD2     0x0000FF00
+#define FCR_CMD2_SHIFT        8
+#define FCR_CMD3     0x000000FF
+#define FCR_CMD3_SHIFT        0
+	__be32 fbar;            /**< Flash Block Address Register */
+#define FBAR_BLK     0x00FFFFFF
+	__be32 fpar;            /**< Flash Page Address Register */
+#define FPAR_SP_PI   0x00007C00
+#define FPAR_SP_PI_SHIFT     10
+#define FPAR_SP_MS   0x00000200
+#define FPAR_SP_CI   0x000001FF
+#define FPAR_SP_CI_SHIFT      0
+#define FPAR_LP_PI   0x0003F000
+#define FPAR_LP_PI_SHIFT     12
+#define FPAR_LP_MS   0x00000800
+#define FPAR_LP_CI   0x000007FF
+#define FPAR_LP_CI_SHIFT      0
+	__be32 fbcr;            /**< Flash Byte Count Register */
+#define FBCR_BC      0x00000FFF
+	u8 res11[0x8];
+	u8 res8[0xF00];
+};
+
+extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+extern spinlock_t fsl_lbc_lock;
+
+/*
+ * FSL UPM routines
+ */
+struct fsl_upm {
+	__be32 __iomem *mxmr;
+	int width;
+};
+
+extern int fsl_lbc_find(phys_addr_t addr_base);
+extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
+
+/**
+ * fsl_upm_start_pattern - start UPM patterns execution
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @pat_offset:	UPM pattern offset for the command to be executed
+ *
+ * This routine programmes UPM so the next memory access that hits an UPM
+ * will trigger pattern execution, starting at pat_offset.
+ */
+static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
+{
+	clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset);
+}
+
+/**
+ * fsl_upm_end_pattern - end UPM patterns execution
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ *
+ * This routine reverts UPM to normal operation mode.
+ */
+static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
+{
+	clrbits32(upm->mxmr, MxMR_OP_RP);
+
+	while (in_be32(upm->mxmr) & MxMR_OP_RP)
+		cpu_relax();
+}
+
+/**
+ * fsl_upm_run_pattern - actually run an UPM pattern
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @io_base:	remapped pointer to where memory access should happen
+ * @mar:	MAR register content during pattern execution
+ *
+ * This function triggers dummy write to the memory specified by the io_base,
+ * thus UPM pattern actually executed. Note that mar usage depends on the
+ * pre-programmed AMX bits in the UPM RAM.
+ */
+static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
+				      void __iomem *io_base, u32 mar)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsl_lbc_lock, flags);
+
+	out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
+
+	switch (upm->width) {
+	case 8:
+		out_8(io_base, 0x0);
+		break;
+	case 16:
+		out_be16(io_base, 0x0);
+		break;
+	case 32:
+		out_be32(io_base, 0x0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
+
+	return ret;
+}
+
+#endif /* __ASM_FSL_LBC_H */
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
index 82a45261509..7b6f411db3e 100644
--- a/include/asm-powerpc/immap_qe.h
+++ b/include/asm-powerpc/immap_qe.h
@@ -20,6 +20,7 @@
 #ifdef __KERNEL__
 
 #include <linux/kernel.h>
+#include <asm/io.h>
 
 #define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
 
@@ -468,7 +469,7 @@ struct qe_immap {
 	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
 } __attribute__ ((packed));
 
-extern struct qe_immap *qe_immr;
+extern struct qe_immap __iomem *qe_immr;
 extern phys_addr_t get_qe_base(void);
 
 static inline unsigned long immrbar_virt_to_phys(void *address)
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index 430dc77b35f..c3be6e2e149 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -85,6 +85,7 @@ extern int par_io_data_set(u8 port, u8 pin, u8 val);
 /* QE internal API */
 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
 enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
 int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
@@ -92,7 +93,16 @@ unsigned long qe_muram_alloc(int size, int align);
 int qe_muram_free(unsigned long offset);
 unsigned long qe_muram_alloc_fixed(unsigned long offset, int size);
 void qe_muram_dump(void);
-void *qe_muram_addr(unsigned long offset);
+
+static inline void __iomem *qe_muram_addr(unsigned long offset)
+{
+	return (void __iomem *)&qe_immr->muram[offset];
+}
+
+static inline unsigned long qe_muram_offset(void __iomem *addr)
+{
+	return addr - (void __iomem *)qe_immr->muram;
+}
 
 /* Structure that defines QE firmware binary files.
  *