diff options
author | Paul Mackerras <paulus@samba.org> | 2007-03-26 14:08:19 +1000 |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2007-03-26 14:08:19 +1000 |
commit | 3771f2d9a46ca3b57e473afe929196efad7f3aa6 (patch) | |
tree | acc03ec60470b7c0987df05486f6af877e367be3 | |
parent | 70b52b3869a31aab85241a1f998f9943a3905637 (diff) | |
parent | 4330f5da98eb91392c7a7b00c22a24c57079c0fc (diff) |
Merge branch 'ppc_kconfig' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.22
-rw-r--r-- | arch/powerpc/Kconfig | 385 | ||||
-rw-r--r-- | arch/powerpc/Kconfig.debug | 3 | ||||
-rw-r--r-- | arch/powerpc/platforms/52xx/Kconfig | 35 | ||||
-rw-r--r-- | arch/powerpc/platforms/82xx/Kconfig | 35 | ||||
-rw-r--r-- | arch/powerpc/platforms/Kconfig | 219 | ||||
-rw-r--r-- | arch/powerpc/platforms/cell/Kconfig | 23 | ||||
-rw-r--r-- | arch/powerpc/platforms/celleb/Kconfig | 9 | ||||
-rw-r--r-- | arch/powerpc/platforms/chrp/Kconfig | 11 | ||||
-rw-r--r-- | arch/powerpc/platforms/embedded6xx/Kconfig | 264 | ||||
-rw-r--r-- | arch/powerpc/platforms/iseries/Kconfig | 4 | ||||
-rw-r--r-- | arch/powerpc/platforms/maple/Kconfig | 17 | ||||
-rw-r--r-- | arch/powerpc/platforms/pasemi/Kconfig | 12 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/Kconfig | 20 | ||||
-rw-r--r-- | arch/powerpc/platforms/prep/Kconfig | 9 | ||||
-rw-r--r-- | arch/powerpc/platforms/ps3/Kconfig | 16 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/Kconfig | 10 |
16 files changed, 424 insertions, 648 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index ec092b7ea24..20a8fdcaacb 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -372,383 +372,7 @@ endmenu source "init/Kconfig" -menu "Platform support" - depends on PPC64 || CLASSIC32 - -choice - prompt "Machine type" - default PPC_MULTIPLATFORM - -config PPC_MULTIPLATFORM - bool "Generic desktop/server/laptop" - help - Select this option if configuring for an IBM pSeries or - RS/6000 machine, an Apple machine, or a PReP, CHRP, - Maple or Cell-based machine. - -config EMBEDDED6xx - bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 && (BROKEN||BROKEN_ON_SMP) - -config APUS - bool "Amiga-APUS" - depends on PPC32 && BROKEN - help - Select APUS if configuring for a PowerUP Amiga. - More information is available at: - <http://linux-apus.sourceforge.net/>. -endchoice - -config QUICC_ENGINE - bool - depends on PPC_MPC836x || PPC_MPC832x - default y - help - The QUICC Engine (QE) is a new generation of communications - coprocessors on Freescale embedded CPUs (akin to CPM in older chips). - Selecting this option means that you wish to build a kernel - for a machine with a QE coprocessor. - -config PPC_PSERIES - depends on PPC_MULTIPLATFORM && PPC64 - bool "IBM pSeries & new (POWER5-based) iSeries" - select MPIC - select PPC_I8259 - select PPC_RTAS - select RTAS_ERROR_LOGGING - select PPC_UDBG_16550 - select PPC_NATIVE - default y - -config PPC_ISERIES - bool "IBM Legacy iSeries" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_INDIRECT_IO - -config PPC_CHRP - bool "Common Hardware Reference Platform (CHRP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 - select MPIC - select PPC_I8259 - select PPC_INDIRECT_PCI - select PPC_RTAS - select PPC_MPC106 - select PPC_UDBG_16550 - select PPC_NATIVE - default y - -config PPC_MPC52xx - bool - default n - -config PPC_MPC5200 - bool - select PPC_MPC52xx - default n - -config PPC_MPC5200_BUGFIX - bool "MPC5200 (L25R) bugfix support" - depends on PPC_MPC5200 - default n - help - Enable workarounds for original MPC5200 errata. This is not required - for MPC5200B based boards. - - It is safe to say 'Y' here - -config PPC_EFIKA - bool "bPlan Efika 5k2. MPC5200B based computer" - depends on PPC_MULTIPLATFORM && PPC32 - select PPC_RTAS - select RTAS_PROC - select PPC_MPC52xx - select PPC_NATIVE - default n - -config PPC_LITE5200 - bool "Freescale Lite5200 Eval Board" - depends on PPC_MULTIPLATFORM && PPC32 - select PPC_MPC5200 - default n - -config PPC_PMAC - bool "Apple PowerMac based machines" - depends on PPC_MULTIPLATFORM - select MPIC - select PPC_INDIRECT_PCI if PPC32 - select PPC_MPC106 if PPC32 - select PPC_NATIVE - default y - -config PPC_PMAC64 - bool - depends on PPC_PMAC && POWER4 - select MPIC - select U3_DART - select MPIC_BROKEN_U3 - select GENERIC_TBSYNC - select PPC_970_NAP - default y - -config PPC_PREP - bool "PowerPC Reference Platform (PReP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 && BROKEN - select MPIC - select PPC_I8259 - select PPC_INDIRECT_PCI - select PPC_UDBG_16550 - select PPC_NATIVE - default n - -config PPC_MAPLE - depends on PPC_MULTIPLATFORM && PPC64 - bool "Maple 970FX Evaluation Board" - select MPIC - select U3_DART - select MPIC_BROKEN_U3 - select GENERIC_TBSYNC - select PPC_UDBG_16550 - select PPC_970_NAP - select PPC_NATIVE - select PPC_RTAS - select MMIO_NVRAM - select ATA_NONSTANDARD if ATA - default n - help - This option enables support for the Maple 970FX Evaluation Board. - For more information, refer to <http://www.970eval.com> - -config PPC_PASEMI - depends on PPC_MULTIPLATFORM && PPC64 - bool "PA Semi SoC-based platforms" - default n - select MPIC - select PPC_UDBG_16550 - select GENERIC_TBSYNC - select PPC_NATIVE - help - This option enables support for PA Semi's PWRficient line - of SoC processors, including PA6T-1682M - -config PPC_CELL - bool - default n - -config PPC_CELL_NATIVE - bool - select PPC_CELL - select PPC_DCR_MMIO - select PPC_OF_PLATFORM_PCI - select PPC_INDIRECT_IO - select PPC_NATIVE - select MPIC - default n - -config PPC_IBM_CELL_BLADE - bool "IBM Cell Blade" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_CELL_NATIVE - select PPC_RTAS - select MMIO_NVRAM - select PPC_UDBG_16550 - select UDBG_RTAS_CONSOLE - -config PPC_PS3 - bool "Sony PS3 (incomplete)" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_CELL - select USB_ARCH_HAS_OHCI - select USB_OHCI_LITTLE_ENDIAN - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_ARCH_HAS_EHCI - select USB_EHCI_BIG_ENDIAN_MMIO - help - This option enables support for the Sony PS3 game console - and other platforms using the PS3 hypervisor. - Support for this platform is not yet complete, so - enabling this will not result in a bootable kernel on a - PS3 system. - -config PPC_CELLEB - bool "Toshiba's Cell Reference Set 'Celleb' Architecture" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_CELL - select PPC_OF_PLATFORM_PCI - select HAS_TXX9_SERIAL - select PPC_UDBG_BEAT - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_EHCI_BIG_ENDIAN_MMIO - -config PPC_NATIVE - bool - depends on PPC_MULTIPLATFORM - help - Support for running natively on the hardware, i.e. without - a hypervisor. This option is not user-selectable but should - be selected by all platforms that need it. - -config UDBG_RTAS_CONSOLE - bool "RTAS based debug console" - depends on PPC_RTAS - default n - -config PPC_UDBG_BEAT - bool "BEAT based debug console" - depends on PPC_CELLEB - default n - -config XICS - depends on PPC_PSERIES - bool - default y - -config U3_DART - bool - depends on PPC_MULTIPLATFORM && PPC64 - default n - -config PPC_RTAS - bool - default n - -config RTAS_ERROR_LOGGING - bool - depends on PPC_RTAS - default n - -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on PPC64 && RTAS_PROC - -config PPC_PMI - tristate "Support for PMI" - depends PPC_IBM_CELL_BLADE - help - PMI (Platform Management Interrupt) is a way to - communicate with the BMC (Baseboard Mangement Controller). - It is used in some IBM Cell blades. - default m - -config MMIO_NVRAM - bool - default n - -config MPIC_BROKEN_U3 - bool - depends on PPC_MAPLE - default y - -config IBMVIO - depends on PPC_PSERIES || PPC_ISERIES - bool - default y - -config IBMEBUS - depends on PPC_PSERIES - bool "Support for GX bus based adapters" - help - Bus device driver for GX bus based adapters. - -config PPC_MPC106 - bool - default n - -config PPC_970_NAP - bool - default n - -config PPC_INDIRECT_IO - bool - select GENERIC_IOMAP - default n - -config GENERIC_IOMAP - bool - default n - -source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on CPU_FREQ && ADB_PMU && PPC32 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on CPU_FREQ && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config PPC601_SYNC_FIX - bool "Workarounds for PPC601 bugs" - depends on 6xx && (PPC_PREP || PPC_PMAC) - help - Some versions of the PPC601 (the first PowerPC chip) have bugs which - mean that extra synchronization instructions are required near - certain instructions, typically those that make major changes to the - CPU state. These extra instructions reduce performance slightly. - If you say N here, these extra instructions will not be included, - resulting in a kernel which will run faster but may not run at all - on some systems with the PPC601 chip. - - If in doubt, say Y here. - -config TAU - bool "On-chip CPU temperature sensor support" - depends on 6xx - help - G3 and G4 processors have an on-chip temperature sensor called the - 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die - temperature within 2-4 degrees Celsius. This option shows the current - on-die temperature in /proc/cpuinfo if the cpu supports it. - - Unfortunately, on some chip revisions, this sensor is very inaccurate - and in many cases, does not work at all, so don't assume the cpu - temp is actually what /proc/cpuinfo says it is. - -config TAU_INT - bool "Interrupt driven TAU driver (DANGEROUS)" - depends on TAU - ---help--- - The TAU supports an interrupt driven mode which causes an interrupt - whenever the temperature goes out of range. This is the fastest way - to get notified the temp has exceeded a range. With this option off, - a timer is used to re-check the temperature periodically. - - However, on some cpus it appears that the TAU interrupt hardware - is buggy and can cause a situation which would lead unexplained hard - lockups. - - Unless you are extending the TAU driver, or enjoy kernel/hardware - debugging, leave this option off. - -config TAU_AVERAGE - bool "Average high and low temp" - depends on TAU - ---help--- - The TAU hardware can compare the temperature to an upper and lower - bound. The default behavior is to show both the upper and lower - bound in /proc/cpuinfo. If the range is large, the temperature is - either changing a lot, or the TAU hardware is broken (likely on some - G4's). If the range is small (around 4 degrees), the temperature is - relatively stable. If you say Y here, a single temperature value, - halfway between the upper and lower bounds, will be reported in - /proc/cpuinfo. - - If in doubt, say N here. - -endmenu +source "arch/powerpc/platforms/Kconfig" source arch/powerpc/platforms/embedded6xx/Kconfig source arch/powerpc/platforms/4xx/Kconfig @@ -757,9 +381,6 @@ source arch/powerpc/platforms/83xx/Kconfig source arch/powerpc/platforms/85xx/Kconfig source arch/powerpc/platforms/86xx/Kconfig source arch/powerpc/platforms/8xx/Kconfig -source arch/powerpc/platforms/cell/Kconfig -source arch/powerpc/platforms/ps3/Kconfig -source arch/powerpc/platforms/pasemi/Kconfig menu "Kernel options" @@ -864,7 +485,6 @@ config IRQ_ALL_CPUS CPU. Generally saying Y is safe, although some problems have been reported with SMP Power Macintoshes with this option enabled. -source "arch/powerpc/platforms/pseries/Kconfig" config NUMA bool "NUMA support" @@ -936,8 +556,6 @@ config PROC_DEVICETREE an image of the device tree that the kernel copies from Open Firmware or other boot firmware. If unsure, say Y here. -source "arch/powerpc/platforms/prep/Kconfig" - config CMDLINE_BOOL bool "Default bootloader kernel arguments" @@ -1234,7 +852,6 @@ source "fs/Kconfig" source "arch/powerpc/sysdev/qe_lib/Kconfig" -source "arch/powerpc/platforms/iseries/Kconfig" source "lib/Kconfig" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index d39d13327e6..50f48f0c563 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -132,8 +132,7 @@ config BOOTX_TEXT config SERIAL_TEXT_DEBUG bool "Support for early boot texts over serial port" - depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \ - PPC_GEN550 || PPC_MPC52xx + depends on 4xx config PPC_EARLY_DEBUG bool "Early debugging (dangerous)" diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig new file mode 100644 index 00000000000..bc4aa4a80a1 --- /dev/null +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -0,0 +1,35 @@ +config PPC_MPC52xx + bool + default n + +config PPC_MPC5200 + bool + select PPC_MPC52xx + default n + +config PPC_MPC5200_BUGFIX + bool "MPC5200 (L25R) bugfix support" + depends on PPC_MPC5200 + default n + help + Enable workarounds for original MPC5200 errata. This is not required + for MPC5200B based boards. + + It is safe to say 'Y' here + +config PPC_EFIKA + bool "bPlan Efika 5k2. MPC5200B based computer" + depends on PPC_MULTIPLATFORM && PPC32 + select PPC_RTAS + select RTAS_PROC + select PPC_MPC52xx + select PPC_NATIVE + default n + +config PPC_LITE5200 + bool "Freescale Lite5200 Eval Board" + depends on PPC_MULTIPLATFORM && PPC32 + select PPC_MPC5200 + default n + + diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 47d841ecf2e..411071686f2 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -18,4 +18,39 @@ config MPC82xx_ADS endchoice +config PQ2ADS + bool + depends on ADS8272 + default y + +config ADS8272 + bool + +config 8260 + bool "CPM2 Support" if WILLOW + depends on 6xx + default y if PQ2FADS + help + The MPC8260 is a typical embedded CPU made by Motorola. Selecting + this option means that you wish to build a kernel for a machine with + an 8260 class CPU. + +config 8272 + bool + depends on 6xx + default y if ADS8272 + select 8260 + help + The MPC8272 CPM has a different internal dpram setup than other CPM2 + devices + +config CPM2 + bool + depends on 8260 || MPC8560 || MPC8555 + default y + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it (826x, 827x, 8560). endmenu diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig new file mode 100644 index 00000000000..388a1bdd28e --- /dev/null +++ b/arch/powerpc/platforms/Kconfig @@ -0,0 +1,219 @@ +menu "Platform support" + depends on PPC64 || CLASSIC32 + +choice + prompt "Machine type" + default PPC_MULTIPLATFORM + +config PPC_MULTIPLATFORM + bool "Generic desktop/server/laptop" + help + Select this option if configuring for an IBM pSeries or + RS/6000 machine, an Apple machine, or a PReP, CHRP, + Maple or Cell-based machine. + +config EMBEDDED6xx + bool "Embedded 6xx/7xx/7xxx-based board" + depends on PPC32 && (BROKEN||BROKEN_ON_SMP) + +config APUS + bool "Amiga-APUS" + depends on PPC32 && BROKEN + help + Select APUS if configuring for a PowerUP Amiga. + More information is available at: + <http://linux-apus.sourceforge.net/>. +endchoice + +config QUICC_ENGINE + bool + depends on PPC_MPC836x || PPC_MPC832x + default y + help + The QUICC Engine (QE) is a new generation of communications + coprocessors on Freescale embedded CPUs (akin to CPM in older chips). + Selecting this option means that you wish to build a kernel + for a machine with a QE coprocessor. + +source "arch/powerpc/platforms/pseries/Kconfig" +source "arch/powerpc/platforms/iseries/Kconfig" +source "arch/powerpc/platforms/chrp/Kconfig" +source "arch/powerpc/platforms/52xx/Kconfig" +source "arch/powerpc/platforms/powermac/Kconfig" +source "arch/powerpc/platforms/prep/Kconfig" +source "arch/powerpc/platforms/maple/Kconfig" +source "arch/powerpc/platforms/pasemi/Kconfig" +source arch/powerpc/platforms/celleb/Kconfig +source arch/powerpc/platforms/ps3/Kconfig +source arch/powerpc/platforms/cell/Kconfig + +config PPC_NATIVE + bool + depends on PPC_MULTIPLATFORM + help + Support for running natively on the hardware, i.e. without + a hypervisor. This option is not user-selectable but should + be selected by all platforms that need it. + +config UDBG_RTAS_CONSOLE + bool "RTAS based debug console" + depends on PPC_RTAS + default n + +config PPC_UDBG_BEAT + bool "BEAT based debug console" + depends on PPC_CELLEB + default n + +config XICS + depends on PPC_PSERIES + bool + default y + +config U3_DART + bool + depends on PPC_MULTIPLATFORM && PPC64 + default n + +config PPC_RTAS + bool + default n + +config RTAS_ERROR_LOGGING + bool + depends on PPC_RTAS + default n + +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config PPC_PMI + tristate "Support for PMI" + depends PPC_IBM_CELL_BLADE + help + PMI (Platform Management Interrupt) is a way to + communicate with the BMC (Baseboard Mangement Controller). + It is used in some IBM Cell blades. + default m + +config MMIO_NVRAM + bool + default n + +config MPIC_BROKEN_U3 + bool + depends on PPC_MAPLE + default y + +config IBMVIO + depends on PPC_PSERIES || PPC_ISERIES + bool + default y + +config IBMEBUS + depends on PPC_PSERIES + bool "Support for GX bus based adapters" + help + Bus device driver for GX bus based adapters. + +config PPC_MPC106 + bool + default n + +config PPC_970_NAP + bool + default n + +config PPC_INDIRECT_IO + bool + select GENERIC_IOMAP + default n + +config GENERIC_IOMAP + bool + default n + +source "drivers/cpufreq/Kconfig" + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on CPU_FREQ && ADB_PMU && PPC32 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on CPU_FREQ && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC601_SYNC_FIX + bool "Workarounds for PPC601 bugs" + depends on 6xx && (PPC_PREP || PPC_PMAC) + help + Some versions of the PPC601 (the first PowerPC chip) have bugs which + mean that extra synchronization instructions are required near + certain instructions, typically those that make major changes to the + CPU state. These extra instructions reduce performance slightly. + If you say N here, these extra instructions will not be included, + resulting in a kernel which will run faster but may not run at all + on some systems with the PPC601 chip. + + If in doubt, say Y here. + +config TAU + bool "On-chip CPU temperature sensor support" + depends on 6xx + help + G3 and G4 processors have an on-chip temperature sensor called the + 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die + temperature within 2-4 degrees Celsius. This option shows the current + on-die temperature in /proc/cpuinfo if the cpu supports it. + + Unfortunately, on some chip revisions, this sensor is very inaccurate + and in many cases, does not work at all, so don't assume the cpu + temp is actually what /proc/cpuinfo says it is. + +config TAU_INT + bool "Interrupt driven TAU driver (DANGEROUS)" + depends on TAU + ---help--- + The TAU supports an interrupt driven mode which causes an interrupt + whenever the temperature goes out of range. This is the fastest way + to get notified the temp has exceeded a range. With this option off, + a timer is used to re-check the temperature periodically. + + However, on some cpus it appears that the TAU interrupt hardware + is buggy and can cause a situation which would lead unexplained hard + lockups. + + Unless you are extending the TAU driver, or enjoy kernel/hardware + debugging, leave this option off. + +config TAU_AVERAGE + bool "Average high and low temp" + depends on TAU + ---help--- + The TAU hardware can compare the temperature to an upper and lower + bound. The default behavior is to show both the upper and lower + bound in /proc/cpuinfo. If the range is large, the temperature is + either changing a lot, or the TAU hardware is broken (likely on some + G4's). If the range is small (around 4 degrees), the temperature is + relatively stable. If you say Y here, a single temperature value, + halfway between the upper and lower bounds, will be reported in + /proc/cpuinfo. + + If in doubt, say N here. + +endmenu diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 06a85b70433..53913a26ef4 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -1,3 +1,26 @@ +config PPC_CELL + bool + default n + +config PPC_CELL_NATIVE + bool + select PPC_CELL + select PPC_DCR_MMIO + select PPC_OF_PLATFORM_PCI + select PPC_INDIRECT_IO + select PPC_NATIVE + select MPIC + default n + +config PPC_IBM_CELL_BLADE + bool "IBM Cell Blade" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL_NATIVE + select PPC_RTAS + select MMIO_NVRAM + select PPC_UDBG_16550 + select UDBG_RTAS_CONSOLE + menu "Cell Broadband Engine options" depends on PPC_CELL diff --git a/arch/powerpc/platforms/celleb/Kconfig b/arch/powerpc/platforms/celleb/Kconfig new file mode 100644 index 00000000000..2db1e293433 --- /dev/null +++ b/arch/powerpc/platforms/celleb/Kconfig @@ -0,0 +1,9 @@ +config PPC_CELLEB + bool "Toshiba's Cell Reference Set 'Celleb' Architecture" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL + select PPC_OF_PLATFORM_PCI + select HAS_TXX9_SERIAL + select PPC_UDBG_BEAT + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_MMIO diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig new file mode 100644 index 00000000000..d2c69053196 --- /dev/null +++ b/arch/powerpc/platforms/chrp/Kconfig @@ -0,0 +1,11 @@ +config PPC_CHRP + bool "Common Hardware Reference Platform (CHRP) based machines" + depends on PPC_MULTIPLATFORM && PPC32 + select MPIC + select PPC_I8259 + select PPC_INDIRECT_PCI + select PPC_RTAS + select PPC_MPC106 + select PPC_UDBG_16550 + select PPC_NATIVE + default y diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 3410bcbc9db..9557908ef54 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -2,78 +2,6 @@ choice prompt "Machine Type" depends on EMBEDDED6xx -config KATANA - bool "Artesyn-Katana" - help - Select KATANA if configuring an Artesyn KATANA 750i or 3750 - cPCI board. - -config WILLOW - bool "Cogent-Willow" - -config CPCI690 - bool "Force-CPCI690" - help - Select CPCI690 if configuring a Force CPCI690 cPCI board. - -config POWERPMC250 - bool "Force-PowerPMC250" - -config CHESTNUT - bool "IBM 750FX Eval board or 750GX Eval board" - help - Select CHESTNUT if configuring an IBM 750FX Eval Board or a - IBM 750GX Eval board. - -config SPRUCE - bool "IBM-Spruce" - select PPC_INDIRECT_PCI - -config HDPU - bool "Sky-HDPU" - help - Select HDPU if configuring a Sky Computers Compute Blade. - -config HDPU_FEATURES - depends on HDPU - tristate "HDPU-Features" - help - Select to enable HDPU enhanced features. - -config EV64260 - bool "Marvell-EV64260BP" - help - Select EV64260 if configuring a Marvell (formerly Galileo) - EV64260BP Evaluation platform. - -config LOPEC - bool "Motorola-LoPEC" - select PPC_I8259 - -config MVME5100 - bool "Motorola-MVME5100" - select PPC_INDIRECT_PCI - -config PPLUS - bool "Motorola-PowerPlus" - select PPC_I8259 - select PPC_INDIRECT_PCI - -config PRPMC750 - bool "Motorola-PrPMC750" - select PPC_INDIRECT_PCI - -config PRPMC800 - bool "Motorola-PrPMC800" - select PPC_INDIRECT_PCI - -config SANDPOINT - bool "Motorola-Sandpoint" - select PPC_I8259 - help - Select SANDPOINT if configuring for a Motorola Sandpoint X3 - (any flavor). - config LINKSTATION bool "Linkstation / Kurobox(HG) from Buffalo" select MPIC @@ -97,212 +25,24 @@ config MPC7448HPC2 help Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) platform - -config RADSTONE_PPC7D - bool "Radstone Technology PPC7D board" - select PPC_I8259 - -config PAL4 - bool "SBS-Palomar4" - -config EST8260 - bool "EST8260" - ---help--- - The EST8260 is a single-board computer manufactured by Wind River - Systems, Inc. (formerly Embedded Support Tools Corp.) and based on - the MPC8260. Wind River Systems has a website at - <http://www.windriver.com/>, but the EST8260 cannot be found on it - and has probably been discontinued or rebadged. - -config SBC82xx - bool "SBC82xx" - ---help--- - SBC PowerQUICC II, single-board computer with MPC82xx CPU - Manufacturer: Wind River Systems, Inc. - Date of Release: May 2003 - End of Life: - - URL: <http://www.windriver.com/> - -config SBS8260 - bool "SBS8260" - -config RPX8260 - bool "RPXSUPER" - -config TQM8260 - bool "TQM8260" - ---help--- - MPC8260 based module, little larger than credit card, - up to 128 MB global + 64 MB local RAM, 32 MB Flash, - 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet, - 2 x serial ports, ... - Manufacturer: TQ Components, www.tq-group.de - Date of Release: June 2001 - End of Life: not yet :-) - URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf> - -config ADS8272 - bool "ADS8272" - -config PQ2FADS - bool "Freescale-PQ2FADS" - help - Select PQ2FADS if you wish to configure for a Freescale - PQ2FADS board (-VR or -ZU). - -config EV64360 - bool "Marvell-EV64360BP" - help - Select EV64360 if configuring a Marvell EV64360BP Evaluation - platform. endchoice -config PQ2ADS - bool - depends on ADS8272 - default y - -config TQM8xxL - bool - depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) - default y - -config 8260 - bool "CPM2 Support" if WILLOW - depends on 6xx - default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS - help - The MPC8260 is a typical embedded CPU made by Motorola. Selecting - this option means that you wish to build a kernel for a machine with - an 8260 class CPU. - -config 8272 - bool - depends on 6xx - default y if ADS8272 - select 8260 - help - The MPC8272 CPM has a different internal dpram setup than other CPM2 - devices - -config CPM2 - bool - depends on 8260 || MPC8560 || MPC8555 - default y - help - The CPM2 (Communications Processor Module) is a coprocessor on - embedded CPUs made by Motorola. Selecting this option means that - you wish to build a kernel for a machine with a CPM2 coprocessor - on it (826x, 827x, 8560). - -config PPC_GEN550 - bool - depends on SANDPOINT || SPRUCE || PPLUS || \ - PRPMC750 || PRPMC800 || LOPEC || \ - (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ - 83xx || LINKSTATION - default y - -config FORCE - bool - depends on 6xx && POWERPMC250 - default y - -config GT64260 - bool - depends on EV64260 || CPCI690 - default y - -config MV64360 # Really MV64360 & MV64460 - bool - depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360 - default y - -config MV64X60 - bool - depends on (GT64260 || MV64360) - select PPC_INDIRECT_PCI - default y - config TSI108_BRIDGE bool depends on MPC7448HPC2 default y -menu "Set bridge options" - depends on MV64X60 - -config NOT_COHERENT_CACHE - bool "Turn off Cache Coherency" - default n - help - Some 64x60 bridges lock up when trying to enforce cache coherency. - When this option is selected, cache coherency will be turned off. - Note that this can cause other problems (e.g., stale data being - speculatively loaded via a cached mapping). Use at your own risk. - -config MV64X60_BASE - hex "Set bridge base used by firmware" - default "0xf1000000" - help - A firmware can leave the base address of the bridge's registers at - a non-standard location. If so, set this value to reflect the - address of that non-standard location. - -config MV64X60_NEW_BASE - hex "Set bridge base used by kernel" - default "0xf1000000" - help - If the current base address of the bridge's registers is not where - you want it, set this value to the address that you want it moved to. - -endmenu - -config NONMONARCH_SUPPORT - bool "Enable Non-Monarch Support" - depends on PRPMC800 - -config HARRIER - bool - depends on PRPMC800 - default y - -config EPIC_SERIAL_MODE - bool - depends on 6xx && (LOPEC || SANDPOINT) - default y - config MPC10X_BRIDGE bool - depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION + depends on LINKSTATION select PPC_INDIRECT_PCI default y config MPC10X_OPENPIC bool - depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION + depends on LINKSTATION default y config MPC10X_STORE_GATHERING bool "Enable MPC10x store gathering" depends on MPC10X_BRIDGE - -config SANDPOINT_ENABLE_UART1 - bool "Enable DUART mode on Sandpoint" - depends on SANDPOINT - help - If this option is enabled then the MPC824x processor will run - in DUART mode instead of UART mode. - -config HARRIER_STORE_GATHERING - bool "Enable Harrier store gathering" - depends on HARRIER - -config MVME5100_IPMC761_PRESENT - bool "MVME5100 configured with an IPMC761" - depends on MVME5100 - select PPC_I8259 - -config SPRUCE_BAUD_33M - bool "Spruce baud clock support" - depends on SPRUCE diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig index 54e6b3b6f26..46c3a8e7c3a 100644 --- a/arch/powerpc/platforms/iseries/Kconfig +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -1,3 +1,7 @@ +config PPC_ISERIES + bool "IBM Legacy iSeries" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_INDIRECT_IO menu "iSeries device drivers" depends on PPC_ISERIES diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig new file mode 100644 index 00000000000..5f364b8e5c0 --- /dev/null +++ b/arch/powerpc/platforms/maple/Kconfig @@ -0,0 +1,17 @@ +config PPC_MAPLE + depends on PPC_MULTIPLATFORM && PPC64 + bool "Maple 970FX Evaluation Board" + select MPIC + select U3_DART + select MPIC_BROKEN_U3 + select GENERIC_TBSYNC + select PPC_UDBG_16550 + select PPC_970_NAP + select PPC_NATIVE + select PPC_RTAS + select MMIO_NVRAM + select ATA_NONSTANDARD if ATA + default n + help + This option enables support for the Maple 970FX Evaluation Board. + For more information, refer to <http://www.970eval.com> diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig index 68dc529dfd2..64e55250ef4 100644 --- a/arch/powerpc/platforms/pasemi/Kconfig +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -1,3 +1,15 @@ +config PPC_PASEMI + depends on PPC_MULTIPLATFORM && PPC64 + bool "PA Semi SoC-based platforms" + default n + select MPIC + select PPC_UDBG_16550 + select GENERIC_TBSYNC + select PPC_NATIVE + help + This option enables support for PA Semi's PWRficient line + of SoC processors, including PA6T-1682M + menu "PA Semi PWRficient options" depends on PPC_PASEMI diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig new file mode 100644 index 00000000000..02d9c7dba87 --- /dev/null +++ b/arch/powerpc/platforms/powermac/Kconfig @@ -0,0 +1,20 @@ +config PPC_PMAC + bool "Apple PowerMac based machines" + depends on PPC_MULTIPLATFORM + select MPIC + select PPC_INDIRECT_PCI if PPC32 + select PPC_MPC106 if PPC32 + select PPC_NATIVE + default y + +config PPC_PMAC64 + bool + depends on PPC_PMAC && POWER4 + select MPIC + select U3_DART + select MPIC_BROKEN_U3 + select GENERIC_TBSYNC + select PPC_970_NAP + default y + + diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig index 673ac47a162..29d411279b0 100644 --- a/arch/powerpc/platforms/prep/Kconfig +++ b/arch/powerpc/platforms/prep/Kconfig @@ -1,3 +1,12 @@ +config PPC_PREP + bool "PowerPC Reference Platform (PReP) based machines" + depends on PPC_MULTIPLATFORM && PPC32 && BROKEN + select MPIC + select PPC_I8259 + select PPC_INDIRECT_PCI + select PPC_UDBG_16550 + select PPC_NATIVE + default n config PREP_RESIDUAL bool "Support for PReP Residual Data" diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 1a481a60a88..40f0008af4d 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -1,3 +1,19 @@ +config PPC_PS3 + bool "Sony PS3 (incomplete)" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL + select USB_ARCH_HAS_OHCI + select USB_OHCI_LITTLE_ENDIAN + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_ARCH_HAS_EHCI + select USB_EHCI_BIG_ENDIAN_MMIO + help + This option enables support for the Sony PS3 game console + and other platforms using the PS3 hypervisor. + Support for this platform is not yet complete, so + enabling this will not result in a bootable kernel on a + PS3 system. + menu "PS3 Platform Options" depends on PPC_PS3 diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index a57032cf6f1..16e4e401b82 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -1,3 +1,13 @@ +config PPC_PSERIES + depends on PPC_MULTIPLATFORM && PPC64 + bool "IBM pSeries & new (POWER5-based) iSeries" + select MPIC + select PPC_I8259 + select PPC_RTAS + select RTAS_ERROR_LOGGING + select PPC_UDBG_16550 + select PPC_NATIVE + default y config PPC_SPLPAR depends on PPC_PSERIES |