aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTejun Heo <htejun@gmail.com>2006-11-29 11:33:14 +0900
committerTejun Heo <htejun@gmail.com>2006-11-29 14:57:44 +0900
commit41669553353554211310cdb23079d58af1fda41e (patch)
tree2aace00509badc17ad432fa5e2b83f56b6d7453e
parent08475a1920aa7acc535324d6991b830fa7625bd8 (diff)
[PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers
JMicron AHCI controllers set PORT_IRQ_IF_ERR on device errors. The IRQ status bit indicates interface error or protocol mismatch and ahci driver interprets it into AC_ERR_ATA_BUS. So, whenever an ATAPI device raises check condition, ahci interprets it as ATA bus error and thus resets it which, in turn, raises check condition thus creating a reset loop and rendering the device unuseable. This patch makes JMB controllers ignore PORT_IRQ_IF_ERR when interpreting error condition. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Justin Tsai <justin@jmicron.com>
-rw-r--r--drivers/ata/ahci.c27
1 files changed, 22 insertions, 5 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f510e1196dc..bddb14e91d3 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -78,6 +78,7 @@ enum {
board_ahci = 0,
board_ahci_vt8251 = 1,
+ board_ahci_ign_iferr = 2,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -168,6 +169,7 @@ enum {
/* ap->flags bits */
AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24),
AHCI_FLAG_NO_NCQ = (1 << 25),
+ AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 26), /* ignore IRQ_IF_ERR */
};
struct ahci_cmd_hdr {
@@ -295,6 +297,17 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
},
+ /* board_ahci_ign_iferr */
+ {
+ .sht = &ahci_sht,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_SKIP_D2H_BSY |
+ AHCI_FLAG_IGN_IRQ_IF_ERR,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &ahci_ops,
+ },
};
static const struct pci_device_id ahci_pci_tbl[] = {
@@ -327,11 +340,11 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
/* JMicron */
- { PCI_VDEVICE(JMICRON, 0x2360), board_ahci }, /* JMicron JMB360 */
- { PCI_VDEVICE(JMICRON, 0x2361), board_ahci }, /* JMicron JMB361 */
- { PCI_VDEVICE(JMICRON, 0x2363), board_ahci }, /* JMicron JMB363 */
- { PCI_VDEVICE(JMICRON, 0x2365), board_ahci }, /* JMicron JMB365 */
- { PCI_VDEVICE(JMICRON, 0x2366), board_ahci }, /* JMicron JMB366 */
+ { PCI_VDEVICE(JMICRON, 0x2360), board_ahci_ign_iferr }, /* JMB360 */
+ { PCI_VDEVICE(JMICRON, 0x2361), board_ahci_ign_iferr }, /* JMB361 */
+ { PCI_VDEVICE(JMICRON, 0x2363), board_ahci_ign_iferr }, /* JMB363 */
+ { PCI_VDEVICE(JMICRON, 0x2365), board_ahci_ign_iferr }, /* JMB365 */
+ { PCI_VDEVICE(JMICRON, 0x2366), board_ahci_ign_iferr }, /* JMB366 */
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */
@@ -980,6 +993,10 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
/* analyze @irq_stat */
ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
+ /* some controllers set IRQ_IF_ERR on device errors, ignore it */
+ if (ap->flags & AHCI_FLAG_IGN_IRQ_IF_ERR)
+ irq_stat &= ~PORT_IRQ_IF_ERR;
+
if (irq_stat & PORT_IRQ_TF_ERR)
err_mask |= AC_ERR_DEV;