aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-09-03 07:30:13 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-09-03 07:30:13 -0700
commitec0c15afb41fd9ad45b53468b60db50170e22346 (patch)
treeba0b41ec5c1975949949ae7cb792bb1811aab97b
parentd26acd92fa990764b72608a68224f46fac377032 (diff)
Split up PIT part of TSC calibration from native_calibrate_tsc
The TSC calibration function is still very complicated, but this makes it at least a little bit less so by moving the PIT part out into a helper function of its own. Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--arch/x86/kernel/tsc.c132
1 files changed, 71 insertions, 61 deletions
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index ac79bd143da..346cae5ac42 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -122,15 +122,75 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet)
return ULLONG_MAX;
}
+/*
+ * Try to calibrate the TSC against the Programmable
+ * Interrupt Timer and return the frequency of the TSC
+ * in kHz.
+ *
+ * Return ULONG_MAX on failure to calibrate.
+ */
+static unsigned long pit_calibrate_tsc(void)
+{
+ u64 tsc, t1, t2, delta;
+ unsigned long tscmin, tscmax;
+ int pitcnt;
+
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Setup CTC channel 2* for mode 0, (interrupt on terminal
+ * count mode), binary count. Set the latch register to 50ms
+ * (LSB then MSB) to begin countdown.
+ */
+ outb(0xb0, 0x43);
+ outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
+ outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+
+ tsc = t1 = t2 = get_cycles();
+
+ pitcnt = 0;
+ tscmax = 0;
+ tscmin = ULONG_MAX;
+ while ((inb(0x61) & 0x20) == 0) {
+ t2 = get_cycles();
+ delta = t2 - tsc;
+ tsc = t2;
+ if ((unsigned long) delta < tscmin)
+ tscmin = (unsigned int) delta;
+ if ((unsigned long) delta > tscmax)
+ tscmax = (unsigned int) delta;
+ pitcnt++;
+ }
+
+ /*
+ * Sanity checks:
+ *
+ * If we were not able to read the PIT more than 5000
+ * times, then we have been hit by a massive SMI
+ *
+ * If the maximum is 10 times larger than the minimum,
+ * then we got hit by an SMI as well.
+ */
+ if (pitcnt < 5000 || tscmax > 10 * tscmin)
+ return ULONG_MAX;
+
+ /* Calculate the PIT value */
+ delta = t2 - t1;
+ do_div(delta, 50);
+ return delta;
+}
+
+
/**
* native_calibrate_tsc - calibrate the tsc on boot
*/
unsigned long native_calibrate_tsc(void)
{
- u64 tsc1, tsc2, tr1, tr2, tsc, delta, pm1, pm2, hpet1, hpet2;
+ u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
- unsigned long flags, tscmin, tscmax;
- int hpet = is_hpet_enabled(), pitcnt, i;
+ unsigned long flags;
+ int hpet = is_hpet_enabled(), i;
/*
* Run 5 calibration loops to get the lowest frequency value
@@ -157,72 +217,22 @@ unsigned long native_calibrate_tsc(void)
* amount of time anyway.
*/
for (i = 0; i < 5; i++) {
-
- tscmin = ULONG_MAX;
- tscmax = 0;
- pitcnt = 0;
-
- local_irq_save(flags);
+ unsigned long tsc_pit_khz;
/*
* Read the start value and the reference count of
- * hpet/pmtimer when available:
+ * hpet/pmtimer when available. Then do the PIT
+ * calibration, which will take at least 50ms, and
+ * read the end value.
*/
+ local_irq_save(flags);
tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
-
- /* Set the Gate high, disable speaker */
- outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
- /*
- * Setup CTC channel 2* for mode 0, (interrupt on terminal
- * count mode), binary count. Set the latch register to 50ms
- * (LSB then MSB) to begin countdown.
- *
- * Some devices need a delay here.
- */
- outb(0xb0, 0x43);
- outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
- outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-
- tsc = tr1 = tr2 = get_cycles();
-
- while ((inb(0x61) & 0x20) == 0) {
- tr2 = get_cycles();
- delta = tr2 - tsc;
- tsc = tr2;
- if ((unsigned int) delta < tscmin)
- tscmin = (unsigned int) delta;
- if ((unsigned int) delta > tscmax)
- tscmax = (unsigned int) delta;
- pitcnt++;
- }
-
- /*
- * We waited at least 50ms above. Now read
- * pmtimer/hpet reference again
- */
+ tsc_pit_khz = pit_calibrate_tsc();
tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
-
local_irq_restore(flags);
- /*
- * Sanity checks:
- *
- * If we were not able to read the PIT more than 5000
- * times, then we have been hit by a massive SMI
- *
- * If the maximum is 10 times larger than the minimum,
- * then we got hit by an SMI as well.
- */
- if (pitcnt > 5000 && tscmax < 10 * tscmin) {
-
- /* Calculate the PIT value */
- delta = tr2 - tr1;
- do_div(delta, 50);
-
- /* We take the smallest value into account */
- tsc_pit_min = min(tsc_pit_min, (unsigned long) delta);
- }
+ /* Pick the lowest PIT TSC calibration so far */
+ tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
/* hpet or pmtimer available ? */
if (!hpet && !pm1 && !pm2)