aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-12-17 13:32:49 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-12-17 13:32:49 -0800
commit07232b971577442de0821afa0abafb6531b6192e (patch)
tree78c3558239eaebc65df72b40a6a2c6ddc3a02998
parentea9e7b5569a538123dc4d60ba36b9170ca8e8830 (diff)
parent644a9d764b4747af057b3db73ccba28a168b1f4f (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix ->io_32bit race in set_io_32bit() ide: remove stale changelog from ide-probe.c ide: remove stale changelog from ide-disk.c ide: remove dead code from __ide_dma_test_irq() hpt366: fix HPT37x PIO mode timings (take 2) pdc202xx_new: fix Promise TX4 support ide-cd: remove dead post_transform_command() ide: DMA reporting and validity checking fixes (take 3) ide: add /sys/bus/ide/devices/*/{model,firmware,serial} sysfs entries ide: coding style fixes for drivers/ide/setup-pci.c ide: fix ide_scan_pcibus() error message ide: deprecate CONFIG_BLK_DEV_OFFBOARD ide: add missing checks for control register existence ide-scsi: add ide_scsi_hex_dump() helper
-rw-r--r--drivers/ide/Kconfig6
-rw-r--r--drivers/ide/ide-cd.c35
-rw-r--r--drivers/ide/ide-disk.c33
-rw-r--r--drivers/ide/ide-dma.c66
-rw-r--r--drivers/ide/ide-io.c3
-rw-r--r--drivers/ide/ide-iops.c3
-rw-r--r--drivers/ide/ide-lib.c55
-rw-r--r--drivers/ide/ide-probe.c21
-rw-r--r--drivers/ide/ide.c30
-rw-r--r--drivers/ide/pci/hpt366.c71
-rw-r--r--drivers/ide/pci/pdc202xx_new.c3
-rw-r--r--drivers/ide/setup-pci.c31
-rw-r--r--drivers/scsi/ide-scsi.c17
-rw-r--r--include/linux/ide.h6
14 files changed, 191 insertions, 189 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 45b22282f14..fb06555708a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -390,7 +390,7 @@ config IDEPCI_PCIBUS_ORDER
# TODO: split it on per host driver config options (or module parameters)
config BLK_DEV_OFFBOARD
- bool "Boot off-board chipsets first support"
+ bool "Boot off-board chipsets first support (DEPRECATED)"
depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
help
Normally, IDE controllers built into the motherboard (on-board
@@ -410,6 +410,10 @@ config BLK_DEV_OFFBOARD
Note that, if you do this, the order of the hd* devices will be
rearranged which may require modification of fstab and other files.
+ Please also note that this method of assuring stable naming of
+ IDE devices is unreliable and use other means for achieving it
+ (i.e. udev).
+
If in doubt, say N.
config BLK_DEV_GENERIC
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 57a5f63d6ae..92ac658dac3 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1650,31 +1650,6 @@ static int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason)
return 1;
}
-static void post_transform_command(struct request *req)
-{
- u8 *c = req->cmd;
- char *ibuf;
-
- if (!blk_pc_request(req))
- return;
-
- if (req->bio)
- ibuf = bio_data(req->bio);
- else
- ibuf = req->data;
-
- if (!ibuf)
- return;
-
- /*
- * set ansi-revision and response data as atapi
- */
- if (c[0] == GPCMD_INQUIRY) {
- ibuf[2] |= 2;
- ibuf[3] = (ibuf[3] & 0xf0) | 2;
- }
-}
-
typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
/*
@@ -1810,9 +1785,6 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
return ide_started;
end_request:
- if (!rq->data_len)
- post_transform_command(rq);
-
spin_lock_irqsave(&ide_lock, flags);
blkdev_dequeue_request(rq);
end_that_request_last(rq, 1);
@@ -3049,12 +3021,7 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive)
else
printk(" drive");
- printk(", %dkB Cache", be16_to_cpu(cap.buffer_size));
-
- if (drive->using_dma)
- ide_dma_verbose(drive);
-
- printk("\n");
+ printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(cap.buffer_size));
return nslots;
}
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 00123d99527..b1781908e1f 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -13,32 +13,6 @@
* and Andre Hedrick <andre@linux-ide.org>
*
* This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
- *
- * Version 1.00 move disk only code from ide.c to ide-disk.c
- * support optional byte-swapping of all data
- * Version 1.01 fix previous byte-swapping code
- * Version 1.02 remove ", LBA" from drive identification msgs
- * Version 1.03 fix display of id->buf_size for big-endian
- * Version 1.04 add /proc configurable settings and S.M.A.R.T support
- * Version 1.05 add capacity support for ATA3 >= 8GB
- * Version 1.06 get boot-up messages to show full cyl count
- * Version 1.07 disable door-locking if it fails
- * Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB,
- * process of adding new ATA4 compliance.
- * fixed problems in allowing fdisk to see
- * the entire disk.
- * Version 1.09 added increment of rq->sector in ide_multwrite
- * added UDMA 3/4 reporting
- * Version 1.10 request queue changes, Ultra DMA 100
- * Version 1.11 added 48-bit lba
- * Version 1.12 adding taskfile io access method
- * Version 1.13 added standby and flush-cache for notifier
- * Version 1.14 added acoustic-wcache
- * Version 1.15 convert all calls to ide_raw_taskfile
- * since args will return register content.
- * Version 1.16 added suspend-resume-checkpower
- * Version 1.17 do flush on standby, do flush on ATA < ATA6
- * fix wcache setup.
*/
#define IDEDISK_VERSION "1.18"
@@ -961,11 +935,8 @@ static void idedisk_setup (ide_drive_t *drive)
if (id->buf_size)
printk (" w/%dKiB Cache", id->buf_size/2);
- printk(", CHS=%d/%d/%d",
- drive->bios_cyl, drive->bios_head, drive->bios_sect);
- if (drive->using_dma)
- ide_dma_verbose(drive);
- printk("\n");
+ printk(KERN_CONT ", CHS=%d/%d/%d\n",
+ drive->bios_cyl, drive->bios_head, drive->bios_sect);
/* write cache enabled? */
if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5)))
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 0d795a1678c..4703837bf1f 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -611,12 +611,6 @@ static int __ide_dma_test_irq(ide_drive_t *drive)
ide_hwif_t *hwif = HWIF(drive);
u8 dma_stat = hwif->INB(hwif->dma_status);
-#if 0 /* do not set unless you know what you are doing */
- if (dma_stat & 4) {
- u8 stat = hwif->INB(IDE_STATUS_REG);
- hwif->OUTB(hwif->dma_status, dma_stat & 0xE4);
- }
-#endif
/* return 1 if INTR asserted */
if ((dma_stat & 4) == 4)
return 1;
@@ -753,10 +747,12 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
mode = XFER_MW_DMA_1;
}
- printk(KERN_DEBUG "%s: %s mode selected\n", drive->name,
+ mode = min(mode, req_mode);
+
+ printk(KERN_INFO "%s: %s mode selected\n", drive->name,
mode ? ide_xfer_verbose(mode) : "no DMA");
- return min(mode, req_mode);
+ return mode;
}
EXPORT_SYMBOL_GPL(ide_find_dma_mode);
@@ -772,6 +768,9 @@ static int ide_tune_dma(ide_drive_t *drive)
if (__ide_dma_bad_drive(drive))
return 0;
+ if (ide_id_dma_bug(drive))
+ return 0;
+
if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
return config_drive_for_dma(drive);
@@ -806,58 +805,23 @@ static int ide_dma_check(ide_drive_t *drive)
return vdma ? 0 : -1;
}
-void ide_dma_verbose(ide_drive_t *drive)
+int ide_id_dma_bug(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
if (id->field_valid & 4) {
if ((id->dma_ultra >> 8) && (id->dma_mword >> 8))
- goto bug_dma_off;
- if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) {
- if (((id->dma_ultra >> 11) & 0x1F) &&
- eighty_ninty_three(drive)) {
- if ((id->dma_ultra >> 15) & 1) {
- printk(", UDMA(mode 7)");
- } else if ((id->dma_ultra >> 14) & 1) {
- printk(", UDMA(133)");
- } else if ((id->dma_ultra >> 13) & 1) {
- printk(", UDMA(100)");
- } else if ((id->dma_ultra >> 12) & 1) {
- printk(", UDMA(66)");
- } else if ((id->dma_ultra >> 11) & 1) {
- printk(", UDMA(44)");
- } else
- goto mode_two;
- } else {
- mode_two:
- if ((id->dma_ultra >> 10) & 1) {
- printk(", UDMA(33)");
- } else if ((id->dma_ultra >> 9) & 1) {
- printk(", UDMA(25)");
- } else if ((id->dma_ultra >> 8) & 1) {
- printk(", UDMA(16)");
- }
- }
- } else {
- printk(", (U)DMA"); /* Can be BIOS-enabled! */
- }
+ goto err_out;
} else if (id->field_valid & 2) {
if ((id->dma_mword >> 8) && (id->dma_1word >> 8))
- goto bug_dma_off;
- printk(", DMA");
- } else if (id->field_valid & 1) {
- goto bug_dma_off;
+ goto err_out;
}
- return;
-bug_dma_off:
- printk(", BUG DMA OFF");
- hwif->dma_off_quietly(drive);
- return;
+ return 0;
+err_out:
+ printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
+ return 1;
}
-EXPORT_SYMBOL(ide_dma_verbose);
-
int ide_set_dma(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index db22d1ff4e5..bef781fec50 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -970,7 +970,8 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
if (rc)
printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
SELECT_DRIVE(drive);
- HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]);
+ if (IDE_CONTROL_REG)
+ HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
rc = ide_wait_not_busy(HWIF(drive), 100000);
if (rc)
printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 5c3256180ae..cef405ddaf0 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -748,6 +748,9 @@ int ide_driveid_update(ide_drive_t *drive)
drive->id->dma_1word = id->dma_1word;
/* anything more ? */
kfree(id);
+
+ if (drive->using_dma && ide_id_dma_bug(drive))
+ ide_dma_off(drive);
}
return 1;
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 1609b8604f5..062d3bcb247 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -29,41 +29,44 @@
* Add common non I/O op stuff here. Make sure it has proper
* kernel-doc function headers or your patch will be rejected
*/
-
+
+static const char *udma_str[] =
+ { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44",
+ "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
+static const char *mwdma_str[] =
+ { "MWDMA0", "MWDMA1", "MWDMA2" };
+static const char *swdma_str[] =
+ { "SWDMA0", "SWDMA1", "SWDMA2" };
+static const char *pio_str[] =
+ { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" };
/**
* ide_xfer_verbose - return IDE mode names
- * @xfer_rate: rate to name
+ * @mode: transfer mode
*
* Returns a constant string giving the name of the mode
* requested.
*/
-char *ide_xfer_verbose (u8 xfer_rate)
+const char *ide_xfer_verbose(u8 mode)
{
- switch(xfer_rate) {
- case XFER_UDMA_7: return("UDMA 7");
- case XFER_UDMA_6: return("UDMA 6");
- case XFER_UDMA_5: return("UDMA 5");
- case XFER_UDMA_4: return("UDMA 4");
- case XFER_UDMA_3: return("UDMA 3");
- case XFER_UDMA_2: return("UDMA 2");
- case XFER_UDMA_1: return("UDMA 1");
- case XFER_UDMA_0: return("UDMA 0");
- case XFER_MW_DMA_2: return("MW DMA 2");
- case XFER_MW_DMA_1: return("MW DMA 1");
- case XFER_MW_DMA_0: return("MW DMA 0");
- case XFER_SW_DMA_2: return("SW DMA 2");
- case XFER_SW_DMA_1: return("SW DMA 1");
- case XFER_SW_DMA_0: return("SW DMA 0");
- case XFER_PIO_4: return("PIO 4");
- case XFER_PIO_3: return("PIO 3");
- case XFER_PIO_2: return("PIO 2");
- case XFER_PIO_1: return("PIO 1");
- case XFER_PIO_0: return("PIO 0");
- case XFER_PIO_SLOW: return("PIO SLOW");
- default: return("XFER ERROR");
- }
+ const char *s;
+ u8 i = mode & 0xf;
+
+ if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7)
+ s = udma_str[i];
+ else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2)
+ s = mwdma_str[i];
+ else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2)
+ s = swdma_str[i];
+ else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5)
+ s = pio_str[i & 0x7];
+ else if (mode == XFER_PIO_SLOW)
+ s = "PIO SLOW";
+ else
+ s = "XFER ERROR";
+
+ return s;
}
EXPORT_SYMBOL(ide_xfer_verbose);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index ee848c70599..2994523be7b 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -13,22 +13,8 @@
*
* This is the IDE probe module, as evolved from hd.c and ide.c.
*
- * Version 1.00 move drive probing code from ide.c to ide-probe.c
- * Version 1.01 fix compilation problem for m68k
- * Version 1.02 increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot
- * by Andrea Arcangeli
- * Version 1.03 fix for (hwif->chipset == ide_4drives)
- * Version 1.04 fixed buggy treatments of known flash memory cards
- *
- * Version 1.05 fix for (hwif->chipset == ide_pdc4030)
- * added ide6/7/8/9
- * allowed for secondary flash card to be detectable
- * with new flag : drive->ata_flash : 1;
- * Version 1.06 stream line request queue and prep for cascade project.
- * Version 1.07 max_sect <= 255; slower disks would get behind and
- * then fall over when they get to 256. Paul G.
- * Version 1.10 Update set for new IDE. drive->id is now always
- * valid after probe time even with noprobe
+ * -- increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot
+ * by Andrea Arcangeli
*/
#include <linux/module.h>
@@ -667,7 +653,8 @@ static int wait_hwif_ready(ide_hwif_t *hwif)
/* Ignore disks that we will not probe for later. */
if (!drive->noprobe || drive->present) {
SELECT_DRIVE(drive);
- hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
+ if (IDE_CONTROL_REG)
+ hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 674a65c1a13..54943da6e4e 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -800,11 +800,17 @@ int set_io_32bit(ide_drive_t *drive, int arg)
if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
return -EINVAL;
+ if (ide_spin_wait_hwgroup(drive))
+ return -EBUSY;
+
drive->io_32bit = arg;
#ifdef CONFIG_BLK_DEV_DTC2278
if (HWIF(drive)->chipset == ide_dtc2278)
HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
#endif /* CONFIG_BLK_DEV_DTC2278 */
+
+ spin_unlock_irq(&ide_lock);
+
return 0;
}
@@ -1670,10 +1676,34 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "ide:m-%s\n", media_string(drive));
}
+static ssize_t model_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->model);
+}
+
+static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->fw_rev);
+}
+
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->id->serial_no);
+}
+
static struct device_attribute ide_dev_attrs[] = {
__ATTR_RO(media),
__ATTR_RO(drivename),
__ATTR_RO(modalias),
+ __ATTR_RO(model),
+ __ATTR_RO(firmware),
+ __ATTR(serial, 0400, serial_show, NULL),
__ATTR_NULL
};
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 5682895d36d..9fce25bdec8 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.21 Oct 23, 2007
+ * linux/drivers/ide/pci/hpt366.c Version 1.22 Dec 4, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
@@ -310,6 +310,8 @@ static u32 twenty_five_base_hpt36x[] = {
/* XFER_PIO_0 */ 0xc0d08585
};
+#if 0
+/* These are the timing tables from the HighPoint open source drivers... */
static u32 thirty_three_base_hpt37x[] = {
/* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
/* XFER_UDMA_5 */ 0x12446231,
@@ -369,6 +371,73 @@ static u32 sixty_six_base_hpt37x[] = {
/* XFER_PIO_1 */ 0x0d029d26,
/* XFER_PIO_0 */ 0x0d029d5e
};
+#else
+/*
+ * The following are the new timing tables with PIO mode data/taskfile transfer
+ * overclocking fixed...
+ */
+
+/* This table is taken from the HPT370 data manual rev. 1.02 */
+static u32 thirty_three_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */
+ /* XFER_UDMA_5 */ 0x16455031,
+ /* XFER_UDMA_4 */ 0x16455031,
+ /* XFER_UDMA_3 */ 0x166d5031,
+ /* XFER_UDMA_2 */ 0x16495031,
+ /* XFER_UDMA_1 */ 0x164d5033,
+ /* XFER_UDMA_0 */ 0x16515097,
+
+ /* XFER_MW_DMA_2 */ 0x26515031,
+ /* XFER_MW_DMA_1 */ 0x26515033,
+ /* XFER_MW_DMA_0 */ 0x26515097,
+
+ /* XFER_PIO_4 */ 0x06515021,
+ /* XFER_PIO_3 */ 0x06515022,
+ /* XFER_PIO_2 */ 0x06515033,
+ /* XFER_PIO_1 */ 0x06915065,
+ /* XFER_PIO_0 */ 0x06d1508a
+};
+
+static u32 fifty_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1a861842,
+ /* XFER_UDMA_5 */ 0x1a861842,
+ /* XFER_UDMA_4 */ 0x1aae1842,
+ /* XFER_UDMA_3 */ 0x1a8e1842,
+ /* XFER_UDMA_2 */ 0x1a0e1842,
+ /* XFER_UDMA_1 */ 0x1a161854,
+ /* XFER_UDMA_0 */ 0x1a1a18ea,
+
+ /* XFER_MW_DMA_2 */ 0x2a821842,
+ /* XFER_MW_DMA_1 */ 0x2a821854,
+ /* XFER_MW_DMA_0 */ 0x2a8218ea,
+
+ /* XFER_PIO_4 */ 0x0a821842,
+ /* XFER_PIO_3 */ 0x0a821843,
+ /* XFER_PIO_2 */ 0x0a821855,
+ /* XFER_PIO_1 */ 0x0ac218a8,
+ /* XFER_PIO_0 */ 0x0b02190c
+};
+
+static u32 sixty_six_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1c86fe62,
+ /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */
+ /* XFER_UDMA_4 */ 0x1c8afe62,
+ /* XFER_UDMA_3 */ 0x1c8efe62,
+ /* XFER_UDMA_2 */ 0x1c92fe62,
+ /* XFER_UDMA_1 */ 0x1c9afe62,
+ /* XFER_UDMA_0 */ 0x1c82fe62,
+
+ /* XFER_MW_DMA_2 */ 0x2c82fe62,
+ /* XFER_MW_DMA_1 */ 0x2c82fe66,
+ /* XFER_MW_DMA_0 */ 0x2c82ff2e,
+
+ /* XFER_PIO_4 */ 0x0c82fe62,
+ /* XFER_PIO_3 */ 0x0c82fe84,
+ /* XFER_PIO_2 */ 0x0c82fea6,
+ /* XFER_PIO_1 */ 0x0d02ff26,
+ /* XFER_PIO_0 */ 0x0d42ff7f
+};
+#endif
#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT371_ALLOW_ATA133_6 1
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 4234efeba60..2b4f44e45a1 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -482,8 +482,9 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
{
struct pci_dev *dev2;
- dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 2,
+ dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1,
PCI_FUNC(dev->devfn)));
+
if (dev2 &&
dev2->vendor == dev->vendor &&
dev2->device == dev->device) {
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 25fd0905322..d2cd5a3d38f 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -704,7 +704,7 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_devices);
/*
* Module interfaces
*/
-
+
static int pre_init = 1; /* Before first ordered IDE scan */
static LIST_HEAD(ide_pci_drivers);
@@ -714,7 +714,7 @@ static LIST_HEAD(ide_pci_drivers);
* @module: owner module of the driver
*
* Registers a driver with the IDE layer. The IDE layer arranges that
- * boot time setup is done in the expected device order and then
+ * boot time setup is done in the expected device order and then
* hands the controllers off to the core PCI code to do the rest of
* the work.
*
@@ -724,13 +724,12 @@ static LIST_HEAD(ide_pci_drivers);
int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
const char *mod_name)
{
- if(!pre_init)
+ if (!pre_init)
return __pci_register_driver(driver, module, mod_name);
driver->driver.owner = module;
list_add_tail(&driver->node, &ide_pci_drivers);
return 0;
}
-
EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
/**
@@ -741,17 +740,18 @@ EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
* This is only used during boot up to get the ordering correct. After
* boot up the pci layer takes over the job.
*/
-
+
static int __init ide_scan_pcidev(struct pci_dev *dev)
{
struct list_head *l;
struct pci_driver *d;
-
+
list_for_each(l, &ide_pci_drivers) {
d = list_entry(l, struct pci_driver, node);
if (d->id_table) {
- const struct pci_device_id *id = pci_match_id(d->id_table,
- dev);
+ const struct pci_device_id *id =
+ pci_match_id(d->id_table, dev);
+
if (id != NULL && d->probe(dev, id) >= 0) {
dev->driver = d;
pci_dev_get(dev);
@@ -779,13 +779,13 @@ void __init ide_scan_pcibus (int scan_direction)
pre_init = 0;
if (!scan_direction)
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
ide_scan_pcidev(dev);
else
- while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev))
- != NULL)
+ while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
+ dev)))
ide_scan_pcidev(dev);
-
+
/*
* Hand the drivers over to the PCI layer now we
* are post init.
@@ -794,9 +794,10 @@ void __init ide_scan_pcibus (int scan_direction)
list_for_each_safe(l, n, &ide_pci_drivers) {
list_del(l);
d = list_entry(l, struct pci_driver, node);
- if (__pci_register_driver(d, d->driver.owner, d->driver.mod_name))
- printk(KERN_ERR "%s: failed to register driver for %s\n",
- __FUNCTION__, d->driver.mod_name);
+ if (__pci_register_driver(d, d->driver.owner,
+ d->driver.mod_name))
+ printk(KERN_ERR "%s: failed to register %s driver\n",
+ __FUNCTION__, d->driver.mod_name);
}
}
#endif
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 7a835a35f21..9706de9d98d 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -242,6 +242,11 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign
}
}
+static void ide_scsi_hex_dump(u8 *data, int len)
+{
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
+}
+
static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
@@ -272,8 +277,7 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co
pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: queue cmd = ", drive->name);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c,
- 6, 0);
+ ide_scsi_hex_dump(pc->c, 6);
}
rq->rq_disk = scsi->disk;
return ide_do_drive_cmd(drive, rq, ide_preempt);
@@ -328,8 +332,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
if (log) {
printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- pc->buffer, 16, 0);
+ ide_scsi_hex_dump(pc->buffer, 16);
}
memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
kfree(pc->buffer);
@@ -808,12 +811,10 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- cmd->cmnd, cmd->cmd_len, 0);
+ ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len);
if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- pc->c, 12, 0);
+ ide_scsi_hex_dump(pc->c, 12);
}
}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index dc75ccbcf99..9a6a41e7079 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1255,6 +1255,7 @@ int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
#ifdef CONFIG_BLK_DEV_IDEDMA
int __ide_dma_bad_drive(ide_drive_t *);
+int ide_id_dma_bug(ide_drive_t *);
u8 ide_find_dma_mode(ide_drive_t *, u8);
@@ -1264,7 +1265,6 @@ static inline u8 ide_max_dma_mode(ide_drive_t *drive)
}
void ide_dma_off(ide_drive_t *);
-void ide_dma_verbose(ide_drive_t *);
int ide_set_dma(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);
@@ -1287,6 +1287,7 @@ extern void ide_dma_timeout(ide_drive_t *);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
#else
+static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
static inline void ide_dma_off(ide_drive_t *drive) { ; }
@@ -1333,8 +1334,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
hwif->hwif_data = data;
}
-/* ide-lib.c */
-extern char *ide_xfer_verbose(u8 xfer_rate);
+const char *ide_xfer_verbose(u8 mode);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);