aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTrent Piepho <tpiepho@freescale.com>2008-11-19 03:13:14 -0800
committerKumar Gala <galak@kernel.crashing.org>2008-12-03 08:19:18 -0600
commitb3898895355f73973eb3aef3489e999d3fb8e2bc (patch)
treec9738f5585158948f6d2cd3955aa4969b2b4b935
parent6a800f36acd5bf06b5fe2cb27c4d0524d60c3df5 (diff)
powerpc: Better setup of boot page TLB entry
The initial TLB mapping for the kernel boot didn't set the memory coherent attribute, MAS2[M], in SMP mode. If this code supported booting a secondary processor, which it doesn't yet, but if it did, then when a secondary processor boots, it would probably signal the primary processor by setting a variable called something like __secondary_hold_acknowledge. However, due to the lack of the M bit, the primary processor would not snoop the transaction (even if a transaction were broadcast). If primary CPU's L1 D-cache had a copy, it would not be flushed and the CPU would never see the ack. Which would have resulted in the primary CPU spinning for a long time, perhaps a full second before it gives up, while it would have waited for the ack from the secondary CPU that it wouldn't have been able to see because of the stale cache. The value of MAS2 for the boot page TLB1 entry is a compile time constant, so there is no need to calculate it in powerpc assembly language. Also, from the MPC8572 manual section 6.12.5.3, "Bits that represent offsets within a page are ignored and should be cleared." Existing code didn't clear them, this code does. The same when the page of KERNELBASE is found; we don't need to use asm to mask the lower 12 bits off. In the code that computes the address to rfi from, don't hard code the offset to 24 bytes, but have the assembler figure that out for us. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--arch/powerpc/include/asm/mmu-fsl-booke.h2
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S22
2 files changed, 15 insertions, 9 deletions
diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
index 925d93cf64d..5588a41f439 100644
--- a/arch/powerpc/include/asm/mmu-fsl-booke.h
+++ b/arch/powerpc/include/asm/mmu-fsl-booke.h
@@ -40,6 +40,8 @@
#define MAS2_M 0x00000004
#define MAS2_G 0x00000002
#define MAS2_E 0x00000001
+#define MAS2_EPN_MASK(size) (~0 << (2*(size) + 10))
+#define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags))
#define MAS3_RPN 0xFFFFF000
#define MAS3_U0 0x00000200
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 837e3cc9cc8..8942d7a82fa 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -235,36 +235,40 @@ skpinv: addi r6,r6,1 /* Increment */
tlbivax 0,r9
TLBSYNC
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP MAS2_M
+#else
+#define M_IF_SMP 0
+#endif
+
/* 6. Setup KERNELBASE mapping in TLB1[0] */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
- li r7,0
- lis r6,PAGE_OFFSET@h
- ori r6,r6,PAGE_OFFSET@l
- rlwimi r6,r7,0,20,31
+ lis r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@h
+ ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@l
mtspr SPRN_MAS2,r6
mtspr SPRN_MAS3,r8
tlbwe
/* 7. Jump to KERNELBASE mapping */
- lis r6,KERNELBASE@h
- ori r6,r6,KERNELBASE@l
- rlwimi r6,r7,0,20,31
+ lis r6,(KERNELBASE & ~0xfff)@h
+ ori r6,r6,(KERNELBASE & ~0xfff)@l
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */
1: mflr r9
rlwimi r6,r9,0,20,31
- addi r6,r6,24
+ addi r6,r6,(2f - 1b)
mtspr SPRN_SRR0,r6
mtspr SPRN_SRR1,r7
rfi /* start execution out of TLB1[0] entry */
/* 8. Clear out the temp mapping */
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre