Merge branch 'linus' into perfcounters/core

Conflicts:
	arch/x86/kernel/irqinit.c
	arch/x86/kernel/irqinit_64.c
	arch/x86/kernel/traps.c
	arch/x86/mm/fault.c
	include/linux/sched.h
	kernel/exit.c

3 files changed, 120 insertions, 4 deletions

diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
new file mode 100644
index 00000000000..f157d7594ea
--- /dev/null
+++ b/Documentation/trace/events.txt
@@ -0,0 +1,90 @@
+			     Event Tracing
+
+		Documentation written by Theodore Ts'o
+			Updated by Li Zefan
+
+1. Introduction
+===============
+
+Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+without creating custom kernel modules to register probe functions
+using the event tracing infrastructure.
+
+Not all tracepoints can be traced using the event tracing system;
+the kernel developer must provide code snippets which define how the
+tracing information is saved into the tracing buffer, and how the
+tracing information should be printed.
+
+2. Using Event Tracing
+======================
+
+2.1 Via the 'set_event' interface
+---------------------------------
+
+The events which are available for tracing can be found in the file
+/debug/tracing/available_events.
+
+To enable a particular event, such as 'sched_wakeup', simply echo it
+to /debug/tracing/set_event. For example:
+
+	# echo sched_wakeup >> /debug/tracing/set_event
+
+[ Note: '>>' is necessary, otherwise it will firstly disable
+  all the events. ]
+
+To disable an event, echo the event name to the set_event file prefixed
+with an exclamation point:
+
+	# echo '!sched_wakeup' >> /debug/tracing/set_event
+
+To disable all events, echo an empty line to the set_event file:
+
+	# echo > /debug/tracing/set_event
+
+To enable all events, echo '*:*' or '*:' to the set_event file:
+
+	# echo *:* > /debug/tracing/set_event
+
+The events are organized into subsystems, such as ext4, irq, sched,
+etc., and a full event name looks like this: <subsystem>:<event>.  The
+subsystem name is optional, but it is displayed in the available_events
+file.  All of the events in a subsystem can be specified via the syntax
+"<subsystem>:*"; for example, to enable all irq events, you can use the
+command:
+
+	# echo 'irq:*' > /debug/tracing/set_event
+
+2.2 Via the 'enable' toggle
+---------------------------
+
+The events available are also listed in /debug/tracing/events/ hierarchy
+of directories.
+
+To enable event 'sched_wakeup':
+
+	# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
+
+To disable it:
+
+	# echo 0 > /debug/tracing/events/sched/sched_wakeup/enable
+
+To enable all events in sched subsystem:
+
+	# echo 1 > /debug/tracing/events/sched/enable
+
+To eanble all events:
+
+	# echo 1 > /debug/tracing/events/enable
+
+When reading one of these enable files, there are four results:
+
+ 0 - all events this file affects are disabled
+ 1 - all events this file affects are enabled
+ X - there is a mixture of events enabled and disabled
+ ? - this file does not affect any event
+
+3. Defining an event-enabled tracepoint
+=======================================
+
+See The example provided in samples/trace_events
+
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index fd9a3e69381..2a82d860294 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -179,7 +179,7 @@ Here is the list of current tracers that may be configured.
 
 	Function call tracer to trace all kernel functions.
 
-  "function_graph_tracer"
+  "function_graph"
 
 	Similar to the function tracer except that the
 	function tracer probes the functions on their entry
@@ -518,9 +518,18 @@ priority with zero (0) being the highest priority and the nice
 values starting at 100 (nice -20). Below is a quick chart to map
 the kernel priority to user land priorities.
 
-  Kernel priority: 0 to 99    ==> user RT priority 99 to 0
-  Kernel priority: 100 to 139 ==> user nice -20 to 19
-  Kernel priority: 140        ==> idle task priority
+   Kernel Space                     User Space
+ ===============================================================
+   0(high) to  98(low)     user RT priority 99(high) to 1(low)
+                           with SCHED_RR or SCHED_FIFO
+ ---------------------------------------------------------------
+  99                       sched_priority is not used in scheduling
+                           decisions(it must be specified as 0)
+ ---------------------------------------------------------------
+ 100(high) to 139(low)     user nice -20(high) to 19(low)
+ ---------------------------------------------------------------
+ 140                       idle task priority
+ ---------------------------------------------------------------
 
 The task states are:
 
diff --git a/Documentation/trace/power.txt b/Documentation/trace/power.txt
new file mode 100644
index 00000000000..cd805e16dc2
--- /dev/null
+++ b/Documentation/trace/power.txt
@@ -0,0 +1,17 @@
+The power tracer collects detailed information about C-state and P-state
+transitions, instead of just looking at the high-level "average"
+information.
+
+There is a helper script found in scrips/tracing/power.pl in the kernel
+sources which can be used to parse this information and create a
+Scalable Vector Graphics (SVG) picture from the trace data.
+
+To use this tracer:
+
+	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+	echo power > /sys/kernel/debug/tracing/current_tracer
+	echo 1 > /sys/kernel/debug/tracing/tracing_enabled
+	sleep 1
+	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+	cat /sys/kernel/debug/tracing/trace | \
+		perl scripts/tracing/power.pl > out.sv