Merge branch 'for-linus' of git://git.alsa-project.org/alsa-kernel

* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits)
  ALSA: hda: VREF powerdown for headphones
  ALSA: hda: STAC_HP_M4
  ALSA: ASoC: Check for machine type in GTA01 machine driver
  ALSA: mtpav - Fix race in probe
  ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
  ALSA: Add a note on dependency of RTC stuff
  ALSA: ASoC: add new param mux to dapm_mux_update_power
  ALSA: Increase components array size
  ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
  ALSA: hda: comment typo fix
  ALSA: hda: comment typo fix
  ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI
  ALSA: snd-usb-audio: support for Edirol UA-4FX device
  ALSA: usb - Fix possible Oops at USB-MIDI disconnection
  ALSA: hda - Fix another ALC889A (rev 0x100101)
  ALSA: hda: add more board-specific information for Realtek ALC662 rev1
  ALSA: Correct Vladimir Barinov's e-mail address
  ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
  ALSA: hda: SPDIF stream muting support
  ALSA: hda: appletv support
  ...

2 files changed, 90 insertions, 34 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index b117e42a616..e0e54a27fc1 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -746,8 +746,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-hda-intel
   --------------------
 
-    Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
-		ATI SB450, SB600, RS600,
+    Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
+			PCH, SCH),
+		ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
+			RV630, RV635, RV670, RV770,
 		VIA VT8251/VT8237A,
 		SIS966, ULI M5461
 
@@ -807,6 +809,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	ALC260
 	  hp		HP machines
 	  hp-3013	HP machines (3013-variant)
+	  hp-dc7600	HP DC7600
 	  fujitsu	Fujitsu S7020
 	  acer		Acer TravelMate
 	  will		Will laptops (PB V7900)
@@ -828,8 +831,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  hippo		Hippo (ATI) with jack detection, Sony UX-90s
 	  hippo_1	Hippo (Benq) with jack detection
 	  sony-assamd	Sony ASSAMD
+	  toshiba-s06	Toshiba S06
+	  toshiba-rx1	Toshiba RX1
 	  ultra		Samsung Q1 Ultra Vista model
 	  lenovo-3000	Lenovo 3000 y410
+	  nec		NEC Versa S9100
 	  basic		fixed pin assignment w/o SPDIF
 	  auto		auto-config reading BIOS (default)
 
@@ -838,6 +844,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  3stack	3-stack model
 	  toshiba	Toshiba A205
 	  acer		Acer laptops
+	  acer-aspire	Acer Aspire One
 	  dell		Dell OEM laptops (Vostro 1200)
 	  zepto		Zepto laptops
 	  test		for testing/debugging purpose, almost all controls can
@@ -847,6 +854,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	ALC269
 	  basic		Basic preset
+	  quanta	Quanta FL1
+	  eeepc-p703	ASUS Eeepc P703 P900A
+	  eeepc-p901	ASUS Eeepc P901 S101
 
 	ALC662/663
 	  3stack-dig	3-stack (2-channel) with SPDIF
@@ -856,10 +866,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  lenovo-101e	 Lenovo laptop
 	  eeepc-p701	ASUS Eeepc P701
 	  eeepc-ep20	ASUS Eeepc EP20
+	  ecs		ECS/Foxconn mobo
 	  m51va		ASUS M51VA
 	  g71v		ASUS G71V
 	  h13		ASUS H13
 	  g50v		ASUS G50V
+	  asus-mode1	ASUS
+	  asus-mode2	ASUS
+	  asus-mode3	ASUS
+	  asus-mode4	ASUS
+	  asus-mode5	ASUS
+	  asus-mode6	ASUS
 	  auto		auto-config reading BIOS (default)
 
 	ALC882/885
@@ -891,12 +908,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  lenovo-101e	Lenovo 101E
 	  lenovo-nb0763	Lenovo NB0763
 	  lenovo-ms7195-dig Lenovo MS7195
+	  lenovo-sky	Lenovo Sky
 	  haier-w66	Haier W66
 	  3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
 	  6stack-dell	Dell machines with 6stack (Inspiron 530)
 	  mitac		Mitac 8252D
 	  clevo-m720	Clevo M720 laptop series
 	  fujitsu-pi2515 Fujitsu AMILO Pi2515
+	  3stack-6ch-intel Intel DG33* boards
 	  auto		auto-config reading BIOS (default)
 
 	ALC861/660
@@ -929,7 +948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  allout	5-jack in back, 2-jack in front, SPDIF out
 	  auto		auto-config reading BIOS (default)
 
-	AD1882
+	AD1882 / AD1882A
 	  3stack	3-stack mode (default)
 	  6stack	6-stack mode
 
@@ -1079,7 +1098,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	    register value without FIFO size correction as the current
 	    DMA pointer.  position_fix=2 will make the driver to use
 	    the position buffer instead of reading SD_LPIB register.
-	    (Usually SD_LPLIB register is more accurate than the
+	    (Usually SD_LPIB register is more accurate than the
 	    position buffer.)
 
     NB: If you get many "azx_get_response timeout" messages at
@@ -1166,6 +1185,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 			* Event Electronics, EZ8
                         * Digigram VX442
 			* Lionstracs, Mediastaton
+			* Terrasoniq TS 88
 
     model       - Use the given board model, one of the following:
 		  delta1010, dio2496, delta66, delta44, audiophile, delta410,
@@ -1200,7 +1220,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 			* TerraTec Phase 22
 			* TerraTec Phase 28
 			* AudioTrak Prodigy 7.1
-			* AudioTrak Prodigy 7.1LT
+			* AudioTrak Prodigy 7.1 LT
+			* AudioTrak Prodigy 7.1 XT
+			* AudioTrak Prodigy 7.1 HIFI
+			* AudioTrak Prodigy 7.1 HD2
 			* AudioTrak Prodigy 192
 			* Pontis MS300
 			* Albatron K8X800 Pro II 
@@ -1211,12 +1234,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 			* Shuttle SN25P
 			* Onkyo SE-90PCI
 			* Onkyo SE-200PCI
+			* ESI Juli@
+			* Hercules Fortissimo IV
+			* EGO-SYS WaveTerminal 192M
 
     model       - Use the given board model, one of the following:
 		  revo51, revo71, amp2000, prodigy71, prodigy71lt,
-		  prodigy192, aureon51, aureon71, universe, ap192,
-		  k8x800, phase22, phase28, ms300, av710, se200pci,
-		  se90pci
+		  prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
+		  juli, aureon51, aureon71, universe, ap192, k8x800,
+		  phase22, phase28, ms300, av710, se200pci, se90pci,
+		  fortissimo4, sn25p, WT192M
 
     This module supports multiple cards and autoprobe.
 
@@ -1255,7 +1282,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for AC'97 motherboards from Intel and compatibles.
 			* Intel i810/810E, i815, i820, i830, i84x, MX440
-				ICH5, ICH6, ICH7, ESB2
+				ICH5, ICH6, ICH7, 6300ESB, ESB2
 			* SiS 7012 (SiS 735)
 			* NVidia NForce, NForce2, NForce3, MCP04, CK804
 				 CK8, CK8S, MCP501
@@ -1951,6 +1978,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 			* CHIC  True Sound 4Dwave
 			* Shark  Predator4D-PCI
 			* Jaton  SonicWave 4D
+			* SiS SI7018 PCI Audio
+			* Hoontech SoundTrack Digital 4DWave NX
 
     pcm_channels   - max channels (voices) reserved for PCM
     wavetable_size - max wavetable size in kB (4-?kb)
@@ -1966,12 +1995,25 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     vid             - Vendor ID for the device (optional)
     pid             - Product ID for the device (optional)
+    nrpacks	    - Max. number of packets per URB (default: 8)
+    async_unlink    - Use async unlink mode (default: yes)
     device_setup    - Device specific magic number (optional)
                     - Influence depends on the device
                     - Default: 0x0000 
+    ignore_ctl_error - Ignore any USB-controller regarding mixer
+    		       interface (default: no)
 
     This module supports multiple devices, autoprobe and hotplugging.
 
+    NB: nrpacks parameter can be modified dynamically via sysfs.
+        Don't put the value over 20.  Changing via sysfs has no sanity
+	check.
+    NB: async_unlink=0 would cause Oops.  It remains just for
+        debugging purpose (if any).
+    NB: ignore_ctl_error=1 may help when you get an error at accessing
+        the mixer element such as URB error -22.  This happens on some
+        buggy USB device or the controller.
+
   Module snd-usb-caiaq
   --------------------
 
@@ -2078,7 +2120,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2 and D2X.
+    i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
 
     This module supports autoprobe and multiple cards.
 
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index e13c4e67029..b54cb5048df 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -6135,44 +6135,58 @@ struct _snd_pcm_runtime {
       </para>
     </section>
 
-    <section id="useful-functions-snd-assert">
-      <title><function>snd_assert()</function></title>
+    <section id="useful-functions-snd-bug">
+      <title><function>snd_BUG()</function></title>
       <para>
-        <function>snd_assert()</function> macro is similar with the
-      normal <function>assert()</function> macro. For example,  
+        It shows the <computeroutput>BUG?</computeroutput> message and
+      stack trace as well as <function>snd_BUG_ON</function> at the point.
+      It's useful to show that a fatal error happens there. 
+      </para>
+      <para>
+	 When no debug flag is set, this macro is ignored. 
+      </para>
+    </section>
+
+    <section id="useful-functions-snd-bug-on">
+      <title><function>snd_BUG_ON()</function></title>
+      <para>
+        <function>snd_BUG_ON()</function> macro is similar with
+	<function>WARN_ON()</function> macro. For example,  
 
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_assert(pointer != NULL, return -EINVAL);
+  snd_BUG_ON(!pointer);
 ]]>
           </programlisting>
         </informalexample>
-      </para>
 
-      <para>
-        The first argument is the expression to evaluate, and the
-      second argument is the action if it fails. When
-      <constant>CONFIG_SND_DEBUG</constant>, is set, it will show an
-      error message such as <computeroutput>BUG? (xxx)</computeroutput>
-      together with stack trace.
-      </para>
-      <para>
-	 When no debug flag is set, this macro is ignored. 
-      </para>
-    </section>
+	or it can be used as the condition,
+        <informalexample>
+          <programlisting>
+<![CDATA[
+  if (snd_BUG_ON(non_zero_is_bug))
+          return -EINVAL;
+]]>
+          </programlisting>
+        </informalexample>
 
-    <section id="useful-functions-snd-bug">
-      <title><function>snd_BUG()</function></title>
-      <para>
-        It shows the <computeroutput>BUG?</computeroutput> message and
-      stack trace as well as <function>snd_assert</function> at the point.
-      It's useful to show that a fatal error happens there. 
       </para>
+
       <para>
-	 When no debug flag is set, this macro is ignored. 
+        The macro takes an conditional expression to evaluate.
+	When <constant>CONFIG_SND_DEBUG</constant>, is set, the
+	expression is actually evaluated. If it's non-zero, it shows
+	the warning message such as
+	<computeroutput>BUG? (xxx)</computeroutput>
+	normally followed by stack trace.  It returns the evaluated
+	value.
+	When no <constant>CONFIG_SND_DEBUG</constant> is set, this
+	macro always returns zero.
       </para>
+
     </section>
+
   </chapter>