Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 87 insertions, 0 deletions

diff --git a/arch/arm/boot/compressed/head-clps7500.S b/arch/arm/boot/compressed/head-clps7500.S
new file mode 100644
index 00000000000..4a8a689d15e
--- /dev/null
+++ b/arch/arm/boot/compressed/head-clps7500.S
@@ -0,0 +1,87 @@
+/*
+ * linux/arch/arm/boot/compressed/head.S
+ *
+ * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
+ */
+
+#include <linux/config.h>
+
+		/* There are three different ways the kernel can be
+		   booted on a 7500 system: from Angel (loaded in RAM), from
+		   16-bit ROM or from 32-bit Flash.  Luckily, a single kernel
+		   image does for them all. */
+		/* This branch is taken if the CPU memory width matches the
+		   actual device in use.  The default at power on is 16 bits
+		   so we must be prepared for a mismatch. */
+		.section ".start", "ax"
+2:
+		b	1f
+		.word	0xffff
+		.word	0xb632		@ mov r11, #0x03200000
+		.word	0xe3a0
+		.word	0x0000		@ mov r0, #0
+		.word	0xe3a0
+		.word	0x0080		@ strb r0, [r11, #0x80]
+		.word	0xe5cb
+		.word	0xf000		@ mov pc, #0
+		.word	0xe3a0
+1:
+		adr	r1, 2b
+		teq	r1, #0
+		bne	.Langel
+		/* This is a direct-from-ROM boot.  Copy the kernel into 
+		   RAM and run it there. */
+		mov	r0, #0x30
+		mcr	p15, 0, r0, c1, c0, 0
+		mov	r0, #0x13
+		msr	cpsr_cxsf, r0
+		mov	r12, #0x03000000	@ point to LEDs
+		orr	r12, r12, #0x00020000
+		orr	r12, r12, #0xba00
+		mov	r0, #0x5500
+		str	r0, [r12]
+		mov	r0, #0x10000000
+		orr	r0, r0, #0x8000
+		mov	r4, r0
+		ldr	r2, =_end
+2:
+		ldr	r3, [r1], #4
+		str	r3, [r0], #4
+		teq	r0, r2
+		bne	2b
+		mov	r0, #0xff00
+		str	r0, [r12]
+1:	
+		mov	r12, #0x03000000	@ point to LEDs
+		orr	r12, r12, #0x00020000
+		orr	r12, r12, #0xba00
+		mov	r0, #0xfe00
+		str	r0, [r12]
+
+		adr	lr, 1f
+		mov	r0, #0
+		mov	r1, #14		/* MACH_TYPE_CLPS7500 */
+		mov	pc, lr
+.Langel:
+#ifdef CONFIG_ANGELBOOT
+		/* Call Angel to switch into SVC mode. */
+		mov	r0, #0x17
+		swi	0x123456
+#endif
+		/* Ensure all interrupts are off and MMU disabled */
+		mrs	r0, cpsr
+		orr	r0, r0, #0xc0
+		msr	cpsr_cxsf, r0
+
+		adr	lr, 1b
+		orr	lr, lr, #0x10000000
+		mov	r0, #0x30		@ MMU off
+		mcr	p15, 0, r0, c1, c0, 0
+		mov	r0, r0
+	 	mov	pc, lr
+
+		.ltorg
+
+1:
+/* And the rest */
+#include "head.S"