Merge branch 'linus' into tracing/core

Merge reason: Pick up kernel/softirq.c update for dependent fix.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

16 files changed, 1164 insertions, 182 deletions

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c77da586b71..c8a2eac4d13 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -53,6 +53,34 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_EUKREA_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	depends on MACH_MX27
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_EUKREA_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27 used
+	  for wifi or eMMC.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	prompt "Eukrea MBIMX27 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
@@ -67,4 +95,11 @@ config MACH_MX27LITE
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	depends on MACH_MX27
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index b9b1cca4e9b..19560f04563 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -17,4 +17,7 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
 
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 0850fb88ec1..eede79855f4 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0]);
+	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 2c971442f3f..4089951acb4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
 	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
@@ -748,7 +755,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk);
+	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a0f1b367432..50199aff014 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -40,45 +40,87 @@
 #include "devices.h"
 
 /*
- * Resource definition for the MXC IrDA
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
  */
-static struct resource mxc_irda_resources[] = {
-	[0] = {
-		.start   = UART3_BASE_ADDR,
-		.end     = UART3_BASE_ADDR + SZ_4K - 1,
-		.flags   = IORESOURCE_MEM,
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
 	},
-	[1] = {
-		.start   = MXC_INT_UART3,
-		.end     = MXC_INT_UART3,
-		.flags   = IORESOURCE_IRQ,
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
-	.name = "mxc_irda",
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_irda_resources),
-	.resource = mxc_irda_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
 };
+#endif
 
 /*
  * General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
  */
 
 /* We use gpt0 as system timer, so do not add a device for this one */
 
 static struct resource timer1_resources[] = {
-	[0] = {
+	{
 		.start	= GPT2_BASE_ADDR,
 		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT2,
 		.end     = MXC_INT_GPT2,
 		.flags   = IORESOURCE_IRQ,
@@ -89,16 +131,15 @@ struct platform_device mxc_gpt1 = {
 	.name = "imx_gpt",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources
+	.resource = timer1_resources,
 };
 
 static struct resource timer2_resources[] = {
-	[0] = {
+	{
 		.start	= GPT3_BASE_ADDR,
 		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT3,
 		.end     = MXC_INT_GPT3,
 		.flags   = IORESOURCE_IRQ,
@@ -109,17 +150,16 @@ struct platform_device mxc_gpt2 = {
 	.name = "imx_gpt",
 	.id = 2,
 	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources
+	.resource = timer2_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource timer3_resources[] = {
-	[0] = {
+	{
 		.start	= GPT4_BASE_ADDR,
 		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT4,
 		.end     = MXC_INT_GPT4,
 		.flags   = IORESOURCE_IRQ,
@@ -130,16 +170,15 @@ struct platform_device mxc_gpt3 = {
 	.name = "imx_gpt",
 	.id = 3,
 	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources
+	.resource = timer3_resources,
 };
 
 static struct resource timer4_resources[] = {
-	[0] = {
+	{
 		.start	= GPT5_BASE_ADDR,
 		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT5,
 		.end     = MXC_INT_GPT5,
 		.flags   = IORESOURCE_IRQ,
@@ -150,16 +189,15 @@ struct platform_device mxc_gpt4 = {
 	.name = "imx_gpt",
 	.id = 4,
 	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources
+	.resource = timer4_resources,
 };
 
 static struct resource timer5_resources[] = {
-	[0] = {
+	{
 		.start	= GPT6_BASE_ADDR,
 		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT6,
 		.end     = MXC_INT_GPT6,
 		.flags   = IORESOURCE_IRQ,
@@ -170,7 +208,7 @@ struct platform_device mxc_gpt5 = {
 	.name = "imx_gpt",
 	.id = 5,
 	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources
+	.resource = timer5_resources,
 };
 #endif
 
@@ -214,11 +252,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= NFC_BASE_ADDR,
 		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -240,8 +278,7 @@ static struct resource mxc_fb[] = {
 		.start = LCDC_BASE_ADDR,
 		.end   = LCDC_BASE_ADDR + 0xFFF,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_LCDC,
 		.end   = MXC_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
@@ -264,11 +301,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= FEC_BASE_ADDR,
 		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -281,15 +318,14 @@ struct platform_device mxc_fec_device = {
 #endif
 
 static struct resource mxc_i2c_1_resources[] = {
-	[0] = {
+	{
 		.start	= I2C_BASE_ADDR,
 		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C,
 		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -297,20 +333,19 @@ struct platform_device mxc_i2c_device0 = {
 	.name = "imx-i2c",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources
+	.resource = mxc_i2c_1_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_i2c_2_resources[] = {
-	[0] = {
+	{
 		.start	= I2C2_BASE_ADDR,
 		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C2,
 		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -318,17 +353,16 @@ struct platform_device mxc_i2c_device1 = {
 	.name = "imx-i2c",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources
+	.resource = mxc_i2c_2_resources,
 };
 #endif
 
 static struct resource mxc_pwm_resources[] = {
-	[0] = {
+	{
 		.start	= PWM_BASE_ADDR,
 		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_PWM,
 		.end     = MXC_INT_PWM,
 		.flags   = IORESOURCE_IRQ,
@@ -339,28 +373,26 @@ struct platform_device mxc_pwm_device = {
 	.name = "mxc_pwm",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources
+	.resource = mxc_pwm_resources,
 };
 
 /*
  * Resource definition for the MXC SDHC
  */
 static struct resource mxc_sdhc1_resources[] = {
-	[0] = {
-			.start = SDHC1_BASE_ADDR,
-			.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC1,
-			.end   = MXC_INT_SDHC1,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC1,
-			.end    = DMA_REQ_SDHC1,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC1_BASE_ADDR,
+		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC1,
+		.end   = MXC_INT_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC1,
+		.end    = DMA_REQ_SDHC1,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -377,21 +409,19 @@ struct platform_device mxc_sdhc_device0 = {
 };
 
 static struct resource mxc_sdhc2_resources[] = {
-	[0] = {
-			.start = SDHC2_BASE_ADDR,
-			.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC2,
-			.end   = MXC_INT_SDHC2,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC2,
-			.end    = DMA_REQ_SDHC2,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC2_BASE_ADDR,
+		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC2,
+		.end   = MXC_INT_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC2,
+		.end    = DMA_REQ_SDHC2,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -407,35 +437,123 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+#ifdef CONFIG_MACH_MX27
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+#endif
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
 		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
+	}, {
 		.chip.label = "gpio-3",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-	[4] = {
+	}, {
 		.chip.label = "gpio-4",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	},
-	[5] = {
+	}, {
 		.chip.label = "gpio-5",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 049005bb6aa..d315406d672 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
@@ -20,3 +19,11 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
new file mode 100644
index 00000000000..7b187606682
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+	/* in which case UART4 is also used for Bluetooth */
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
new file mode 100644
index 00000000000..7382b6d27ee
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+	{
+		.name			= "backlight",
+		.default_trigger	= "backlight",
+		.active_low		= 0,
+		.gpio			= GPIO_PORTE | 5,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QGVA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* SPI and ADS7846 Touchscreen controler init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+	ads7846_dev_init();
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 169372f69d8..ae8f759134d 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx21_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -79,7 +80,18 @@ void __init mx21_map_io(void)
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx27_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+	mx27_init_irq();
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a5ee461cb40..cf5f77cbc2f 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev)
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DB02
  */
-static struct imx_fb_platform_data mx21ads_fb_data = {
-	.pixclock       = 188679, /* in ps */
-	.xres           = 240,
-	.yres           = 320,
-
-	.bpp            = 16,
-	.hsync_len      = 2,
-	.left_margin    = 6,
-	.right_margin   = 16,
+static struct imx_fb_videomode mx21ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 2,
+			.left_margin	= 6,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 8,
+			.lower_margin	= 10,
+		},
+		.pcr		= 0xfb108bc7,
+		.bpp		= 16,
+	},
+};
 
-	.vsync_len      = 1,
-	.upper_margin   = 8,
-	.lower_margin   = 10,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx21ads_fb_data = {
+	.mode = mx21ads_modes,
+	.num_modes = ARRAY_SIZE(mx21ads_modes),
 
-	.pcr            = 0xFB108BC7,
-	.pwmr           = 0x00A901ff,
-	.lscr1          = 0x00120300,
-	.dmacr          = 0x00020008,
+	.pwmr		= 0x00a903ff,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020008,
 
 	.init = mx21ads_fb_init,
 	.exit = mx21ads_fb_exit,
@@ -280,7 +288,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,
 	.timer          = &mx21ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 02daddac699..83e412b713e 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -183,20 +183,29 @@ void lcd_power(int on)
 		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
-	.pixclock	= 188679,
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 9,
-	.right_margin	= 16,
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
 
 	/*
 	 * - HSYNC active high
@@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = {
 	 * - data enable low active
 	 * - enable sharp mode
 	 */
-	.pcr		= 0xFB008BC0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
@@ -330,7 +338,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 3ae11cb8c04..82ea227ea0c 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,
 	.timer          = &mx27lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 1d9238c7a6c..6761d1b79e4 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,
 	.timer          = &mx27pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
new file mode 100644
index 00000000000..fe5b165b88c
--- /dev/null
+++ b/arch/arm/mach-mx2/pca100.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+	/* GPIO0_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+	/* GPIO1_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+	/* GPIO2_IRQ */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a4628d00434..ee65dda584c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
 };
 
 static struct i2c_board_info pcm038_i2c_devices[] = {
-	[0] = {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
-	},
-	[1] = {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
-	},
-	[2] = {
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
 		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
 	}
 };
 
@@ -220,6 +216,9 @@ static void __init pcm038_init(void)
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
 
+	/* PE18 for user-LED D40 */
+	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -241,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 6a3acaf57dd..c261f59b0b4 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <asm/mach/arch.h>
 
@@ -125,40 +126,96 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
-static struct imx_fb_platform_data pcm038_fb_data = {
-	.pixclock	= 188679, /* in ps (5.3MHz) */
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 5,
-	.right_margin	= 16,
+static struct imx_fb_videomode pcm970_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 7,
+			.left_margin	= 5,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		/*
+		 * - HSYNC active high
+		 * - VSYNC active high
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr		= 0xF00080C0,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "TX090",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 38255,
+			.left_margin	= 144,
+			.right_margin	= 0,
+			.upper_margin	= 7,
+			.lower_margin	= 40,
+			.hsync_len	= 96,
+			.vsync_len	= 1,
+		},
+		/*
+		 * - HSYNC active low (1 << 22)
+		 * - VSYNC active low (1 << 23)
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+		.bpp = 32,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.mode = pcm970_modes,
+	.num_modes = ARRAY_SIZE(pcm970_modes),
 
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock not inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pcr		= 0xFA0080C0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS4_BASE_ADDR,
+		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IRQ_GPIOE(19),
+		.end     = IRQ_GPIOE(19),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -172,4 +229,5 @@ void __init pcm970_baseboard_init(void)
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	platform_device_register(&pcm970_sja1000);
 }