Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...

1 files changed, 155 insertions, 0 deletions

diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 79bdea943eb..6bfd537d5af 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -16,12 +16,164 @@
 #include <linux/amba/bus.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 #include <mach/setup.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
 #include "clock.h"
 
+/* These adresses span 16MB, so use three individual pages */
+static struct resource nhk8815_nand_resources[] = {
+	{
+		.name = "nand_addr",
+		.start = NAND_IO_ADDR,
+		.end = NAND_IO_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_cmd",
+		.start = NAND_IO_CMD,
+		.end = NAND_IO_CMD + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_data",
+		.start = NAND_IO_DATA,
+		.end = NAND_IO_DATA + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static int nhk8815_nand_init(void)
+{
+	/* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
+	writel(0x0000000E, FSMC_PCR(0));
+	writel(0x000D0A00, FSMC_PMEM(0));
+	writel(0x00100A00, FSMC_PATT(0));
+
+	/* enable access to the chip select area */
+	writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
+
+	return 0;
+}
+
+/*
+ * These partitions are the same as those used in the 2.6.20 release
+ * shipped by the vendor; the first two partitions are mandated
+ * by the boot ROM, and the bootloader area is somehow oversized...
+ */
+static struct mtd_partition nhk8815_partitions[] = {
+	{
+		.name	= "X-Loader(NAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M,
+	}, {
+		.name	= "Kernel zImage(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 3 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct nomadik_nand_platform_data nhk8815_nand_data = {
+	.parts		= nhk8815_partitions,
+	.nparts		= ARRAY_SIZE(nhk8815_partitions),
+	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
+			| NAND_NO_READRDY | NAND_NO_AUTOINCR,
+	.init		= nhk8815_nand_init,
+};
+
+static struct platform_device nhk8815_nand_device = {
+	.name		= "nomadik_nand",
+	.dev		= {
+		.platform_data = &nhk8815_nand_data,
+	},
+	.resource	= nhk8815_nand_resources,
+	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
+};
+
+/* These are the partitions for the OneNand device, different from above */
+static struct mtd_partition nhk8815_onenand_partitions[] = {
+	{
+		.name	= "X-Loader(OneNAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M-SZ_256K,
+	}, {
+		.name	= "SysImage(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 4 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct flash_platform_data nhk8815_onenand_data = {
+	.parts		= nhk8815_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
+};
+
+static struct resource nhk8815_onenand_resource[] = {
+	{
+		.start		= 0x30000000,
+		.end		= 0x30000000 + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device nhk8815_onenand_device = {
+	.name		= "onenand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &nhk8815_onenand_data,
+	},
+	.resource	= nhk8815_onenand_resource,
+	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
+};
+
+static void __init nhk8815_onenand_init(void)
+{
+#ifdef CONFIG_ONENAND
+       /* Set up SMCS0 for OneNand */
+       writel(0x000030db, FSMC_BCR0);
+       writel(0x02100551, FSMC_BTR0);
+#endif
+}
+
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 
@@ -81,6 +233,8 @@ static int __init nhk8815_eth_init(void)
 device_initcall(nhk8815_eth_init);
 
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	&nhk8815_nand_device,
+	&nhk8815_onenand_device,
 	&nhk8815_eth_device,
 	/* will add more devices */
 };
@@ -90,6 +244,7 @@ static void __init nhk8815_platform_init(void)
 	int i;
 
 	cpu8815_platform_init();
+	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));