[ARM] 5101/2: EM-X270 updates

Convert EM-X270 pin configuration to use MFP tables and gpio library
Make device initialization dependent on respective driver CONFIG_ value (like
in zylonite)
Add keypad and gpio_key devices

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 293 insertions, 80 deletions

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e23865affc0..e5cc6ca63c7 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <asm/arch/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD		(105)
-#define EM_X270_ETHIRQ		IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ		IRQ_GPIO(13)
+#define GPIO41_ETHIRQ		(41)
+#define GPIO13_MMC_CD		(13)
+#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS	(11)
+#define GPIO56_NAND_RB	(56)
+
+static unsigned long em_x270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* QCI */
+	GPIO84_CIF_FV,
+	GPIO25_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO22_KP_MKOUT_7,
+
+	/* SSP1 */
+	GPIO26_SSP1_RXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO57_SSP1_TXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* power controls */
+	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO41_GPIO,	/* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
 		.start = PXA_CS2_PHYS,
 		.end   = PXA_CS2_PHYS + 3,
@@ -52,36 +180,34 @@ static struct resource em_x270_dm9k_resource[] = {
 	[2] = {
 		.start = EM_X270_ETHIRQ,
 		.end   = EM_X270_ETHIRQ,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9k_resource),
-	.resource	= em_x270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
+	.resource	= em_x270_dm9000_resource,
 	.dev		= {
-		.platform_data = &em_x270_dm9k_platdata,
+		.platform_data = &em_x270_dm9000_platdata,
 	}
 };
 
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-	.name		= "wm97xx-ts",
-	.id		= -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+	platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
 	[0] = {
 		.start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
 	}
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS	(11)
-#define GPIO_NAND_RB	(56)
+static void __init em_x270_init_rtc(void)
+{
+	platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-	GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
 	dsb();
 
-	GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+	return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
 	}
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&em_x270_dm9k,
-	&em_x270_ts,
-	&em_x270_rtc,
-	&em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+	int err;
 
+	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		return;
+	}
+
+	gpio_direction_output(GPIO11_NAND_CS, 1);
+
+	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		gpio_free(GPIO11_NAND_CS);
+		return;
+	}
+
+	gpio_direction_input(GPIO56_NAND_RB);
+
+	platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.init		= em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err;
-
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* EM-X270 uses GPIO13 as SD power enable */
-	pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-	err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			      "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
 		       __func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	free_irq(EM_X270_MMC_IRQ, data);
+	int irq = gpio_to_irq(GPIO13_MMC_CD);
+	free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.exit		= em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+	pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
 	.pixclock	= 50000,
 	.bpp		= 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
 	.modes		= &em_x270_lcd_mode,
 	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lccr0		= LCCR0_PAS,
-	.lccr3		= LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-	/* setup LCD */
 	set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
 
-	/* register EM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 3,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= em_x270_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+	pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
 
-	/* setup STUART GPIOs */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "sleep/wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_PWR,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
 
-	/* setup BTUART GPIOs */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
 
-	/* Setup interrupt for dm9000 */
-	set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &em_x270_gpio_keys_data,
+	},
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+	platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+	em_x270_init_dm9000();
+	em_x270_init_rtc();
+	em_x270_init_nand();
+	em_x270_init_lcd();
+	em_x270_init_mmc();
+	em_x270_init_ohci();
+	em_x270_init_keypad();
+	em_x270_init_gpio_keys();
+	em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,