Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/scsi/fcoe/fcoe.c

19 files changed, 129 insertions, 37 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e66d9099ea..17d3fbd368a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -289,12 +289,12 @@ config MACH_LITTLETON
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index cdf21dd135b..930e364ccde 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static void corgi_wait_for_hsync(void)
+{
+	while (gpio_get_value(CORGI_GPIO_HSYNC))
+		cpu_relax();
+
+	while (!gpio_get_value(CORGI_GPIO_HSYNC))
+		cpu_relax();
+}
+
 static struct ads7846_platform_data corgi_ads7846_info = {
 	.model			= 7846,
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
 	.gpio_pendown		= CORGI_GPIO_TP_INT,
+	.wait_for_sync		= corgi_wait_for_hsync,
 };
 
 static void corgi_ads7846_cs(u32 command)
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 67611dadb44..bc0f73fbd4c 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,7 +28,6 @@
 #include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
-#include <linux/delay.h>
 
 #include <media/soc_camera.h>
 
@@ -644,8 +643,9 @@ static struct pxa2xx_spi_master em_x270_spi_info = {
 };
 
 static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
-	.rx_threshold = 1,
-	.tx_threshold = 1,
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.gpio_cs	= -1,
 };
 
 static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 3465268ca71..485fede83d9 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer;
 extern void __init pxa_init_irq(int irq_nr,
 				int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index f82f96dd105..16eb02552d5 100644
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -4,12 +4,22 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ *              a -1 value means no gpio will be used for reset
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
 typedef struct {
 	int (*startup)(struct snd_pcm_substream *, void *);
 	void (*shutdown)(struct snd_pcm_substream *, void *);
 	void (*suspend)(void *);
 	void (*resume)(void *);
 	void *priv;
+	int reset_gpio;
 } pxa2xx_audio_ops_t;
 
 extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 90230c6f992..a88d7caff0d 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -10,13 +10,13 @@
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
 #else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
 #endif
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 extern void colibri_pxa3xx_init_lcd(int bl_pin);
 #else
-static inline void colibri_pxa3xx_init_lcd(int) {}
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 #endif
 
 #if defined(CONFIG_AX88796)
diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h
index 6c4b1f7de20..58afb30d529 100644
--- a/arch/arm/mach-pxa/include/mach/palmasoc.h
+++ b/arch/arm/mach-pxa/include/mach/palmasoc.h
@@ -1,13 +1,8 @@
 #ifndef _INCLUDE_PALMASOC_H_
 #define _INCLUDE_PALMASOC_H_
+
 struct palm27x_asoc_info {
 	int	jack_gpio;
 };
 
-#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
-#else
-static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
-#endif
-
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 052bfe788ad..d15662aba00 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -37,7 +37,6 @@
 
 /* USB */
 #define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_POWER		95
 #define GPIO_NR_PALMT5_USB_PULLUP		93
 
 /* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 9f7d62fb4cb..e74082c872e 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -38,7 +38,6 @@
 
 /* USB */
 #define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_POWER		95
 #define GPIO_NR_PALMTX_USB_PULLUP		93
 
 /* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index e13f6a81c22..c872b9feb4d 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = {
 	},
 };
 
+static struct da9034_touch_pdata littleton_da9034_touch = {
+	.x_inverted     = 1,
+	.interval_ms    = 20,
+};
+
 static struct da903x_subdev_info littleton_da9034_subdevs[] = {
 	{
 		.name		= "da903x-led",
@@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = {
 	}, {
 		.name		= "da903x-backlight",
 		.id		= DA9034_ID_WLED,
+	}, {
+		.name		= "da9034-touch",
+		.id		= DA9034_ID_TOUCH,
+		.platform_data	= &littleton_da9034_touch,
 	},
 };
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 9203b069b35..ff8052ce0a0 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -742,6 +742,10 @@ struct i2c_pxa_platform_data i2c_pdata = {
 	.fast_mode = 1,
 };
 
+static pxa2xx_audio_ops_t mioa701_ac97_info = {
+	.reset_gpio = 95,
+};
+
 /*
  * Mio global
  */
@@ -815,7 +819,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
 	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
 	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ecf5910e39d..1cec1806f00 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -477,10 +477,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmld_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
 };
 
+static pxa2xx_audio_ops_t palmld_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmld_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmld_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -544,6 +556,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmld_backlight,
 	&palmld_leds,
 	&power_supply,
+	&palmld_asoc,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
@@ -573,11 +586,10 @@ static void __init palmld_init(void)
 
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&palmld_ac97_pdata);
 	pxa_set_ficp_info(&palmld_ficp_platform_data);
 	pxa_set_keypad_info(&palmld_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 0680f1a575a..30662363907 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO40_GPIO,	/* ir disable */
@@ -72,7 +73,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb power */
+	GPIO93_GPIO,	/* usb power */
 
 	/* MATRIX KEYPAD */
 	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
@@ -344,7 +345,7 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
 static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMT5_USB_POWER,
+	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
 	.gpio_pullup_inverted	= 0,
 };
 
@@ -419,10 +420,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmt5_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
 };
 
+static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmt5_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmt5_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -485,14 +498,15 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmt5_backlight,
 	&power_supply,
+	&palmt5_asoc,
 };
 
 /* setup udc GPIOs initial state */
 static void __init palmt5_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
-		gpio_free(GPIO_NR_PALMT5_USB_POWER);
+	if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
 	}
 }
 
@@ -503,12 +517,11 @@ static void __init palmt5_init(void)
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
 	palmt5_udc_init();
+	pxa_set_ac97_info(&palmt5_ac97_pdata);
 	pxa_set_udc_info(&palmt5_udc_info);
-	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmt5_ficp_platform_data);
 	pxa_set_keypad_info(&palmt5_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 59d0c1cba55..e2d44b1a8a9 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -40,6 +40,7 @@
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -64,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO40_GPIO,	/* ir disable */
@@ -75,7 +77,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO13_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb power */
+	GPIO93_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -359,7 +361,7 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
 	.gpio_pullup_inverted	= 0,
 };
 
@@ -433,6 +435,25 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 };
 
 /******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmtx_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMTX_EARPHONE_DETECT,
+};
+
+static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmtx_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmtx_asoc_pdata,
+	},
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmtx_lcd_modes[] = {
@@ -494,6 +515,7 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmtx_backlight,
 	&power_supply,
+	&palmtx_asoc,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -514,9 +536,9 @@ static void __init palmtx_map_io(void)
 /* setup udc GPIOs initial state */
 static void __init palmtx_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
-		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
 	}
 }
 
@@ -528,8 +550,8 @@ static void __init palmtx_init(void)
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
 	palmtx_udc_init();
+	pxa_set_ac97_info(&palmtx_ac97_pdata);
 	pxa_set_udc_info(&palmtx_udc_info);
-	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6112740b4ae..6c12b5a3132 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -377,7 +377,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
 #include <linux/i2c/pca953x.h>
 
 static struct pca953x_platform_data pca9536_data = {
-	.gpio_base	= NR_BUILTIN_GPIO + 1,
+	.gpio_base	= NR_BUILTIN_GPIO,
 };
 
 static int gpio_bus_switch;
@@ -405,9 +405,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
 	int ret;
 
 	if (!gpio_bus_switch) {
-		ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
+		ret = gpio_request(NR_BUILTIN_GPIO, "camera");
 		if (!ret) {
-			gpio_bus_switch = NR_BUILTIN_GPIO + 1;
+			gpio_bus_switch = NR_BUILTIN_GPIO;
 			gpio_direction_output(gpio_bus_switch, 0);
 		} else
 			gpio_bus_switch = -EINVAL;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 8c61ddac119..c18e34acafc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static void spitz_wait_for_hsync(void)
+{
+	while (gpio_get_value(SPITZ_GPIO_HSYNC))
+		cpu_relax();
+
+	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+		cpu_relax();
+}
+
 static struct ads7846_platform_data spitz_ads7846_info = {
 	.model			= 7846,
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
+	.wait_for_sync		= spitz_wait_for_hsync,
 };
 
 static void spitz_ads7846_cs(u32 command)
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 8eb3830fbb0..750c448db67 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -125,7 +125,7 @@ static struct clock_event_device ckevt_pxa_osmr0 = {
 	.set_mode	= pxa_osmr0_set_mode,
 };
 
-static cycle_t pxa_read_oscr(void)
+static cycle_t pxa_read_oscr(struct clocksource *cs)
 {
 	return OSCR;
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c1f73205d07..c256c57642c 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO25_AC97_SDATA_IN_0,
 	GPIO27_AC97_SDATA_OUT,
 	GPIO28_AC97_SYNC,
+	GPIO17_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
 
 	/* SSP3 */
 	GPIO91_SSP3_SCLK,
@@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
+
+	/* GPIO */
+	GPIO18_GPIO,	/* GPIO Expander #0 INT_N */
+	GPIO19_GPIO,	/* GPIO Expander #1 INT_N */
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 4e1c488c690..cc5a2283360 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO38_AC97_SYNC,
 	GPIO39_AC97_BITCLK,
 	GPIO40_AC97_nACRESET,
+	GPIO36_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
 
 	/* SSP3 */
 	GPIO89_SSP3_SCLK,