omap mmc: Add better MMC low-level init

This will simplify the MMC low-level init, and make it more
flexible to add support for a newer MMC controller in the
following patches.

The patch rearranges platform data and gets rid of slot vs
controller confusion in the old data structures. Also fix
device id numbering in the clock code.

Some code snippets are based on an earlier patch by
Russell King <linux@arm.linux.org.uk>.

Cc: Pierre Ossman <drzeus-mmc@drzeus.cx>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 68 insertions, 6 deletions

diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index fc15d13058f..0c2ef3b8956 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -17,12 +17,28 @@
 
 #include <mach/board.h>
 
+#define OMAP15XX_NR_MMC		1
+#define OMAP16XX_NR_MMC		2
+#define OMAP1_MMC_SIZE		0x080
+#define OMAP1_MMC1_BASE		0xfffb7800
+#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+
+#define OMAP24XX_NR_MMC		2
+#define OMAP34XX_NR_MMC		3
+#define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
+#define HSMMC_SIZE		0x200
+#define OMAP2_MMC1_BASE		0x4809c000
+#define OMAP2_MMC2_BASE		0x480b4000
+#define OMAP3_MMC3_BASE		0x480ad000
+#define HSMMC3			(1 << 2)
+#define HSMMC2			(1 << 1)
+#define HSMMC1			(1 << 0)
+
 #define OMAP_MMC_MAX_SLOTS	2
 
 struct omap_mmc_platform_data {
-	struct omap_mmc_conf	conf;
 
-	/* number of slots on board */
+	/* number of slots per controller */
 	unsigned nr_slots:2;
 
 	/* set if your board has components or wiring that limits the
@@ -41,7 +57,27 @@ struct omap_mmc_platform_data {
 	int (*suspend)(struct device *dev, int slot);
 	int (*resume)(struct device *dev, int slot);
 
+	u64 dma_mask;
+
 	struct omap_mmc_slot_data {
+
+		/*
+		 * nomux means "standard" muxing is wrong on this board, and
+		 * that board-specific code handled it before common init logic.
+		 */
+		unsigned nomux:1;
+
+		/* switch pin can be for card detect (default) or card cover */
+		unsigned cover:1;
+
+		/* 4 wire signaling is optional, and is only used for SD/SDIO */
+		unsigned wire4:1;
+
+		/* use the internal clock */
+		unsigned internal_clock:1;
+		s16 power_pin;
+		s16 switch_pin;
+
 		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
 		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
 		int (* get_ro)(struct device *dev, int slot);
@@ -49,8 +85,8 @@ struct omap_mmc_platform_data {
 		/* return MMC cover switch state, can be NULL if not supported.
 		 *
 		 * possible return values:
-		 *   0 - open
-		 *   1 - closed
+		 *   0 - closed
+		 *   1 - open
 		 */
 		int (* get_cover_state)(struct device *dev, int slot);
 
@@ -66,9 +102,35 @@ struct omap_mmc_platform_data {
 	} slots[OMAP_MMC_MAX_SLOTS];
 };
 
-extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
-
 /* called from board-specific card detection service routine */
 extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
 
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+void hsmmc_init(int controller_mask);
+int omap_mmc_add(int id, unsigned long base, unsigned long size,
+			unsigned int irq, struct omap_mmc_platform_data *data);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+static inline void hsmmc_init(int controller_mask)
+{
+}
+static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
+		unsigned int irq, struct omap_mmc_platform_data *data)
+{
+	return 0;
+}
+
+#endif
 #endif