Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into devel-stable

49 files changed, 46 insertions, 5165 deletions

diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 9e9d0286e48..2367908c4f6 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -59,50 +59,6 @@ config S3C_BOOT_UART_FORCE_FIFO
          Say Y here to force the UART FIFOs on during the kernel
 	 uncompressor
 
-comment "Power management"
-
-config S3C2410_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
-config S3C2410_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
-	help
- 	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-	  Note, this can take several seconds depending on memory size
-	  and CPU speed.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on PM && S3C2410_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 
 config S3C_LOWLEVEL_UART_PORT
 	int "S3C UART to use for low-level messages"
@@ -130,39 +86,6 @@ config S3C_GPIO_TRACK
 	  Internal configuration option to enable the s3c specific gpio
 	  chip tracking if the platform requires it.
 
-config S3C_GPIO_PULL_UPDOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_DOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_CFG_S3C24XX
-	bool
-	help
-	  Internal configuration to enable S3C24XX style GPIO configuration
-	  functions.
-
-config S3C_GPIO_CFG_S3C64XX
-	bool
-	help
-	  Internal configuration to enable S3C64XX style GPIO configuration
-	  functions.
-
-config S5P_GPIO_CFG_S5PC1XX
-	bool
-	help
-	  Internal configuration to enable S5PC1XX style GPIO configuration
-	  functions.
-
 # DMA
 
 config S3C_DMA
@@ -170,46 +93,4 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
-# device definitions to compile in
-
-config S3C_DEV_HSMMC
-	bool
-	help
-	  Compile in platform device definitions for HSMMC code
-
-config S3C_DEV_HSMMC1
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 1
-
-config S3C_DEV_HSMMC2
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 2
-
-config S3C_DEV_I2C1
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 1
-
-config S3C_DEV_FB
-	bool
-	help
-	  Compile in platform device definition for framebuffer
-
-config S3C_DEV_USB_HOST
-	bool
-	help
-	  Compile in platform device definition for USB host.
-
-config S3C_DEV_USB_HSOTG
-	bool
-	help
-	  Compile in platform device definition for USB high-speed OtG
-
-config S3C_DEV_NAND
-	bool
-	help
-	  Compile in platform device definition for NAND controller
-
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 50444da9842..89dbdb0adeb 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -11,12 +11,8 @@ obj-				:=
 
 # Core support for all Samsung SoCs
 
-obj-y				+=  init.o
+obj-y				+= init.o
 obj-y				+= time.o
-obj-y				+= clock.o
-obj-y				+= pwm-clock.o
-obj-y				+= gpio.o
-obj-y				+= gpio-config.o
 
 # DMA support
 
@@ -25,21 +21,3 @@ obj-$(CONFIG_S3C_DMA)		+= dma.o
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm-gpio.o
-obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
-
-# devices
-
-obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
-obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
-obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
-obj-y				+= dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
-obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
-obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
deleted file mode 100644
index 619cfa82dca..00000000000
--- a/arch/arm/plat-s3c/clock.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/clock.c
- *
- * Copyright 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clock information */
-
-static LIST_HEAD(clocks);
-
-/* We originally used an mutex here, but some contexts (see resume)
- * are calling functions such as clk_set_parent() with IRQs disabled
- * causing an BUG to be triggered.
- */
-DEFINE_SPINLOCK(clocks_lock);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
-{
-	return 0;
-}
-
-/* Clock API calls */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p;
-	struct clk *clk = ERR_PTR(-ENOENT);
-	int idno;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	spin_lock(&clocks_lock);
-
-	list_for_each_entry(p, &clocks, list) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 &&
-		    try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-	/* check for the case where a device was supplied, but the
-	 * clock that was being searched for is not device specific */
-
-	if (IS_ERR(clk)) {
-		list_for_each_entry(p, &clocks, list) {
-			if (p->id == -1 && strcmp(id, p->name) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				break;
-			}
-		}
-	}
-
-	spin_unlock(&clocks_lock);
-	return clk;
-}
-
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-
-int clk_enable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return -EINVAL;
-
-	clk_enable(clk->parent);
-
-	spin_lock(&clocks_lock);
-
-	if ((clk->usage++) == 0)
-		(clk->enable)(clk, 1);
-
-	spin_unlock(&clocks_lock);
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return;
-
-	spin_lock(&clocks_lock);
-
-	if ((--clk->usage) == 0)
-		(clk->enable)(clk, 0);
-
-	spin_unlock(&clocks_lock);
-	clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (IS_ERR(clk))
-		return 0;
-
-	if (clk->rate != 0)
-		return clk->rate;
-
-	if (clk->get_rate != NULL)
-		return (clk->get_rate)(clk);
-
-	if (clk->parent != NULL)
-		return clk_get_rate(clk->parent);
-
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!IS_ERR(clk) && clk->round_rate)
-		return (clk->round_rate)(clk, rate);
-
-	return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	/* We do not default just do a clk->rate = rate as
-	 * the clock may have been made this way by choice.
-	 */
-
-	WARN_ON(clk->set_rate == NULL);
-
-	if (clk->set_rate == NULL)
-		return -EINVAL;
-
-	spin_lock(&clocks_lock);
-	ret = (clk->set_rate)(clk, rate);
-	spin_unlock(&clocks_lock);
-
-	return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = 0;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	spin_lock(&clocks_lock);
-
-	if (clk->set_parent)
-		ret = (clk->set_parent)(clk, parent);
-
-	spin_unlock(&clocks_lock);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-struct clk clk_xtal = {
-	.name		= "xtal",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_ext = {
-	.name		= "ext",
-	.id		= -1,
-};
-
-struct clk clk_epll = {
-	.name		= "epll",
-	.id		= -1,
-};
-
-struct clk clk_mpll = {
-	.name		= "mpll",
-	.id		= -1,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_upll = {
-	.name		= "upll",
-	.id		= -1,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_f = {
-	.name		= "fclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_mpll,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_h = {
-	.name		= "hclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_p = {
-	.name		= "pclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_usb_bus = {
-	.name		= "usb-bus",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_upll,
-};
-
-
-
-struct clk s3c24xx_uclk = {
-	.name		= "uclk",
-	.id		= -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
-	if (clk->enable == NULL)
-		clk->enable = clk_null_enable;
-
-	/* add to the list of available clocks */
-
-	/* Quick check to see if this clock has already been registered. */
-	BUG_ON(clk->list.prev != clk->list.next);
-
-	spin_lock(&clocks_lock);
-	list_add(&clk->list, &clocks);
-	spin_unlock(&clocks_lock);
-
-	return 0;
-}
-
-int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
-{
-	int fails = 0;
-
-	for (; nr_clks > 0; nr_clks--, clks++) {
-		if (s3c24xx_register_clock(*clks) < 0)
-			fails++;
-	}
-
-	return fails;
-}
-
-/* initalise all the clocks */
-
-int __init s3c24xx_register_baseclocks(unsigned long xtal)
-{
-	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
-
-	clk_xtal.rate = xtal;
-
-	/* register our clocks */
-
-	if (s3c24xx_register_clock(&clk_xtal) < 0)
-		printk(KERN_ERR "failed to register master xtal\n");
-
-	if (s3c24xx_register_clock(&clk_mpll) < 0)
-		printk(KERN_ERR "failed to register mpll clock\n");
-
-	if (s3c24xx_register_clock(&clk_upll) < 0)
-		printk(KERN_ERR "failed to register upll clock\n");
-
-	if (s3c24xx_register_clock(&clk_f) < 0)
-		printk(KERN_ERR "failed to register cpu fclk\n");
-
-	if (s3c24xx_register_clock(&clk_h) < 0)
-		printk(KERN_ERR "failed to register cpu hclk\n");
-
-	if (s3c24xx_register_clock(&clk_p) < 0)
-		printk(KERN_ERR "failed to register cpu pclk\n");
-
-	return 0;
-}
-
diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-s3c/dev-fb.c
deleted file mode 100644
index a90198fc4b0..00000000000
--- a/arch/arm/plat-s3c/dev-fb.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-fb.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for framebuffer device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-fb.h>
-
-#include <plat/fb.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_fb_resource[] = {
-	[0] = {
-		.start = S3C_PA_FB,
-		.end   = S3C_PA_FB + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_LCD_VSYNC,
-		.end   = IRQ_LCD_VSYNC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_LCD_FIFO,
-		.end   = IRQ_LCD_FIFO,
-		.flags = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start = IRQ_LCD_SYSTEM,
-		.end   = IRQ_LCD_SYSTEM,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_fb = {
-	.name		  = "s3c-fb",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_fb_resource),
-	.resource	  = s3c_fb_resource,
-	.dev.dma_mask	  = &s3c_device_fb.dev.coherent_dma_mask,
-	.dev.coherent_dma_mask = 0xffffffffUL,
-};
-
-void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
-{
-	struct s3c_fb_platdata *npd;
-
-	if (!pd) {
-		printk(KERN_ERR "%s: no platform data\n", __func__);
-		return;
-	}
-
-	npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL);
-	if (!npd)
-		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-
-	s3c_device_fb.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-s3c/dev-hsmmc.c
deleted file mode 100644
index 4c05b39810e..00000000000
--- a/arch/arm/plat-s3c/dev-hsmmc.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-hsmmc.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for hsmmc devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define S3C_SZ_HSMMC	(0x1000)
-
-static struct resource s3c_hsmmc_resource[] = {
-	[0] = {
-		.start = S3C_PA_HSMMC0,
-		.end   = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_HSMMC0,
-		.end   = IRQ_HSMMC0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-};
-
-struct platform_device s3c_device_hsmmc0 = {
-	.name		= "s3c-sdhci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc_resource),
-	.resource	= s3c_hsmmc_resource,
-	.dev		= {
-		.dma_mask		= &s3c_device_hsmmc_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL,
-		.platform_data		= &s3c_hsmmc0_def_platdata,
-	},
-};
-
-void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
-
-	set->max_width = pd->max_width;
-
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
-}
diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-s3c/dev-hsmmc1.c
deleted file mode 100644
index e49bc4cd0ee..00000000000
--- a/arch/arm/plat-s3c/dev-hsmmc1.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-hsmmc1.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for hsmmc device 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define S3C_SZ_HSMMC	(0x1000)
-
-static struct resource s3c_hsmmc1_resource[] = {
-	[0] = {
-		.start = S3C_PA_HSMMC1,
-		.end   = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_HSMMC1,
-		.end   = IRQ_HSMMC1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-};
-
-struct platform_device s3c_device_hsmmc1 = {
-	.name		= "s3c-sdhci",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc1_resource),
-	.resource	= s3c_hsmmc1_resource,
-	.dev		= {
-		.dma_mask		= &s3c_device_hsmmc1_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL,
-		.platform_data		= &s3c_hsmmc1_def_platdata,
-	},
-};
-
-void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
-
-	set->max_width = pd->max_width;
-
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
-}
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-s3c/dev-hsmmc2.c
deleted file mode 100644
index 824580bc0e0..00000000000
--- a/arch/arm/plat-s3c/dev-hsmmc2.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
- *
- * Copyright (c) 2009 Samsung Electronics
- * Copyright (c) 2009 Maurus Cuelenaere
- *
- * Based on arch/arm/plat-s3c/dev-hsmmc1.c
- * original file Copyright (c) 2008 Simtec Electronics
- *
- * S3C series device definition for hsmmc device 2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-
-#define S3C_SZ_HSMMC	(0x1000)
-
-static struct resource s3c_hsmmc2_resource[] = {
-	[0] = {
-		.start = S3C_PA_HSMMC2,
-		.end   = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_HSMMC2,
-		.end   = IRQ_HSMMC2,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-};
-
-struct platform_device s3c_device_hsmmc2 = {
-	.name		= "s3c-sdhci",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
-	.resource	= s3c_hsmmc2_resource,
-	.dev		= {
-		.dma_mask		= &s3c_device_hsmmc2_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL,
-		.platform_data		= &s3c_hsmmc2_def_platdata,
-	},
-};
-
-void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
-
-	set->max_width = pd->max_width;
-
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
-}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
deleted file mode 100644
index 4c761529b94..00000000000
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c0.c
- *
- * Copyright 2008-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C_PA_IIC,
-		.end   = S3C_PA_IIC + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC,
-		.end   = IRQ_IIC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c0 = {
-	.name		  = "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
-	.id		  = 0,
-#else
-	.id		  = -1,
-#endif
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-};
-
-void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd)
-		pd = &default_i2c_data0;
-
-	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
-	if (!npd)
-		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-	else if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
-
-	s3c_device_i2c0.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
deleted file mode 100644
index d44f7911050..00000000000
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c1.c
- *
- * Copyright 2008-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C_PA_IIC1,
-		.end   = S3C_PA_IIC1 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC1,
-		.end   = IRQ_IIC1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c1 = {
-	.name		  = "s3c2410-i2c",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
-	.flags		= 0,
-	.bus_num	= 1,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-};
-
-void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd)
-		pd = &default_i2c_data1;
-
-	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
-	if (!npd)
-		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-	else if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
-
-	s3c_device_i2c1.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
deleted file mode 100644
index 84808ccda70..00000000000
--- a/arch/arm/plat-s3c/dev-nand.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * S3C series device definition for nand device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/nand.h>
-
-static struct resource s3c_nand_resource[] = {
-	[0] = {
-		.start = S3C_PA_NAND,
-		.end   = S3C_PA_NAND + SZ_1M,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-struct platform_device s3c_device_nand = {
-	.name		  = "s3c2410-nand",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
-	.resource	  = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
-/**
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
-	void *ptr;
-	int size;
-
-	size = sizeof(struct mtd_partition) * set->nr_partitions;
-	if (size) {
-		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
-		set->partitions = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-	
-	size = sizeof(int) * set->nr_chips;
-	if (size) {
-		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
-		set->nr_map = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->ecc_layout) {
-		ptr = kmemdup(set->ecc_layout,
-			      sizeof(struct nand_ecclayout), GFP_KERNEL);
-		set->ecc_layout = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-	
-	return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
-	struct s3c2410_platform_nand *npd;
-	int size;
-	int ret;
-
-	/* note, if we get a failure in allocation, we simply drop out of the
-	 * function. If there is so little memory available at initialisation
-	 * time then there is little chance the system is going to run.
-	 */ 
-
-	npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
-	if (!npd) {
-		printk(KERN_ERR "%s: failed copying platform data\n", __func__);
-		return;
-	}
-
-	/* now see if we need to copy any of the nand set data */
-
-	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
-	if (size) {
-		struct s3c2410_nand_set *from = npd->sets;
-		struct s3c2410_nand_set *to;
-		int i;
-
-		to = kmemdup(from, size, GFP_KERNEL);
-		npd->sets = to;	/* set, even if we failed */
-
-		if (!to) {
-			printk(KERN_ERR "%s: no memory for sets\n", __func__);
-			return;
-		}
-		
-		for (i = 0; i < npd->nr_sets; i++) {
-			ret = s3c_nand_copy_set(to);
-			if (ret) {
-				printk(KERN_ERR "%s: failed to copy set %d\n",
-				__func__, i);
-				return;
-			}
-			to++;
-		}
-	}
-
-	s3c_device_nand.dev.platform_data = npd;
-}
-
-EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c
deleted file mode 100644
index e2f604b51c8..00000000000
--- a/arch/arm/plat-s3c/dev-usb-hsotg.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for USB high-speed UDC/OtG block
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = {
-		.start	= S3C_PA_USB_HSOTG,
-		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_OTG,
-		.end	= IRQ_OTG,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_usb_hsotg = {
-	.name		= "s3c-hsotg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
-	.resource	= s3c_usb_hsotg_resources,
-};
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
deleted file mode 100644
index 2ee85abed6d..00000000000
--- a/arch/arm/plat-s3c/dev-usb.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-usb.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for USB host
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C_PA_USBHOST,
-		.end   = S3C_PA_USBHOST + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
deleted file mode 100644
index 456969b6fa0..00000000000
--- a/arch/arm/plat-s3c/gpio-config.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio-config.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO configuration core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	int ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	local_irq_save(flags);
-	ret = s3c_gpio_do_setcfg(chip, offset, config);
-	local_irq_restore(flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset, ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	local_irq_save(flags);
-	ret = s3c_gpio_do_setpull(chip, offset, pull);
-	local_irq_restore(flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
-				  unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-			    unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off * 2;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		if (cfg > 3)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x3 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
-int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				 unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
-int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-			    unsigned int off, s3c_gpio_pull_t pull)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup;
-
-	pup = __raw_readl(reg);
-	pup &= ~(3 << shift);
-	pup |= pull << shift;
-	__raw_writel(pup, reg);
-
-	return 0;
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup = __raw_readl(reg);
-
-	pup >>= shift;
-	pup &= 0x3;
-	return (__force s3c_gpio_pull_t)pup;
-}
-#endif
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
deleted file mode 100644
index 5ff24e0f9f8..00000000000
--- a/arch/arm/plat-s3c/gpio.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/gpio-core.h>
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
-{
-	unsigned int gpn;
-	int i;
-
-	gpn = chip->chip.base;
-	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
-		s3c_gpios[gpn] = chip;
-	}
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/* Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- *	        gpio n: 2 bits starting at (2*n)
- *		00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
-*/
-
-static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-
-	__raw_writel(con, base + 0x00);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int s3c_gpiolib_output(struct gpio_chip *chip,
-			      unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= 1 << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static void s3c_gpiolib_set(struct gpio_chip *chip,
-			    unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-}
-
-static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	unsigned long val;
-
-	val = __raw_readl(ourchip->base + 0x04);
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
-__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
-{
-	struct gpio_chip *gc = &chip->chip;
-	int ret;
-
-	BUG_ON(!chip->base);
-	BUG_ON(!gc->label);
-	BUG_ON(!gc->ngpio);
-
-	if (!gc->direction_input)
-		gc->direction_input = s3c_gpiolib_input;
-	if (!gc->direction_output)
-		gc->direction_output = s3c_gpiolib_output;
-	if (!gc->set)
-		gc->set = s3c_gpiolib_set;
-	if (!gc->get)
-		gc->get = s3c_gpiolib_get;
-
-#ifdef CONFIG_PM
-	if (chip->pm != NULL) {
-		if (!chip->pm->save || !chip->pm->resume)
-			printk(KERN_ERR "gpio: %s has missing PM functions\n",
-			       gc->label);
-	} else
-		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
-	/* gpiochip_add() prints own failure message on error. */
-	ret = gpiochip_add(gc);
-	if (ret >= 0)
-		s3c_gpiolib_track(chip);
-}
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
deleted file mode 100644
index 5f3b1cd53b9..00000000000
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/adc.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simnte.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX ADC driver information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ADC_H
-#define __ASM_PLAT_ADC_H __FILE__
-
-struct s3c_adc_client;
-
-extern int s3c_adc_start(struct s3c_adc_client *client,
-			 unsigned int channel, unsigned int nr_samples);
-
-extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
-
-extern struct s3c_adc_client *
-	s3c_adc_register(struct platform_device *pdev,
-			 void (*select)(struct s3c_adc_client *client,
-					unsigned selected),
-			 void (*conv)(struct s3c_adc_client *client,
-				      unsigned d0, unsigned d1,
-				      unsigned *samples_left),
-			 unsigned int is_ts);
-
-extern void s3c_adc_release(struct s3c_adc_client *client);
-
-#endif /* __ASM_PLAT_ADC_H */
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
deleted file mode 100644
index d86af84b5b8..00000000000
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/spinlock.h>
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_epll;
-extern struct clk clk_xtal;
-extern struct clk clk_ext;
-
-/* S3C64XX specific clocks */
-extern struct clk clk_h2;
-extern struct clk clk_27m;
-extern struct clk clk_48m;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern spinlock_t clocks_lock;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern int s3c24xx_register_baseclocks(unsigned long xtal);
-
-extern void s3c64xx_register_clocks(void);
-
-extern void s3c24xx_setup_clocks(unsigned long fclk,
-				 unsigned long hclk,
-				 unsigned long pclk);
-
-extern void s3c2410_setup_clocks(void);
-extern void s3c2412_setup_clocks(void);
-extern void s3c244x_setup_clocks(void);
-extern void s3c2443_setup_clocks(void);
-
-/* S3C64XX specific functions and clocks */
-
-extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
-
-/* Init for pwm clock code */
-
-extern void s3c_pwmclk_init(void);
-
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index d1131ca11e9..676db946567 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -48,9 +48,12 @@ extern void s3c_init_cpu(unsigned long idcode,
 
 extern void s3c24xx_init_irq(void);
 extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
+extern void s5p_init_irq(u32 *vic, u32 num_vic);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+extern void s5p_init_io(struct map_desc *mach_desc,
+			int size, void __iomem *cpuid_addr);
 
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index c1c20b02391..c6f9b731049 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -18,6 +18,7 @@ struct s3c24xx_uart_resources {
 
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
 extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+extern struct s3c24xx_uart_resources s5p_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
@@ -28,12 +29,15 @@ extern struct platform_device s3c64xx_device_iis0;
 extern struct platform_device s3c64xx_device_iis1;
 extern struct platform_device s3c64xx_device_iisv4;
 
+extern struct platform_device s3c64xx_device_spi0;
+extern struct platform_device s3c64xx_device_spi1;
+
 extern struct platform_device s3c64xx_device_pcm0;
 extern struct platform_device s3c64xx_device_pcm1;
 
 extern struct platform_device s3c_device_ts;
 extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_ohci;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-s3c/include/plat/dma-core.h
deleted file mode 100644
index 32ff2a92cb3..00000000000
--- a/arch/arm/plat-s3c/include/plat/dma-core.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung S3C DMA core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
-
-extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
deleted file mode 100644
index 652e2bbdaa2..00000000000
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO pin configuration helper definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This is meant for core cpu support, machine or other driver files
- * should not be including this header.
- */
-
-#ifndef __PLAT_GPIO_CFG_HELPERS_H
-#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
-
-/* As a note, all gpio configuration functions are entered exclusively, either
- * with the relevant lock held or the system prevented from doing anything else
- * by disabling interrupts.
-*/
-
-static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int config)
-{
-	return (chip->config->set_config)(chip, off, config);
-}
-
-static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
-				      unsigned int off, s3c_gpio_pull_t pull)
-{
-	return (chip->config->set_pull)(chip, off, pull);
-}
-
-/**
- * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- *	00 = input
- *	01 = output
- *	1x = special function
-*/
-extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
-*/
-extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- *	0000 = Input
- *	0001 = Output
- *	others = Special functions (dependant on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
- * each case.
-*/
-extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-					unsigned int off, unsigned int cfg);
-
-
-/* Pull-{up,down} resistor controls.
- *
- * S3C2410,S3C2440,S3C24A0 = Pull-UP,
- * S3C2412,S3C2413 = Pull-Down
- * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
- * S3C2443 = Pull-Both [not same as S3C6400]
- */
-
-/**
- * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-up resistor.
- */
-extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull);
-
-/**
- * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
- * @chip: The gpio chip that is being configured
- * @off: The offset for the GPIO being configured
- * @param: pull: The pull mode being requested
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-down resistor.
- */
-extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-				  unsigned int off, s3c_gpio_pull_t pull);
-
-/**
- * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = No pull resistor connected
- *	01 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- */
-extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-				   unsigned int off, s3c_gpio_pull_t pull);
-
-
-/**
- * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
-*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					       unsigned int off);
-
-/**
- * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- *	x1 = No pull up resistor
- */
-extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				    unsigned int off, s3c_gpio_pull_t pull);
-
-/**
- * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
- * @chip: The gpio chip that the GPIO pin belongs to.
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
-*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
-						unsigned int off);
-
-#endif /* __PLAT_GPIO_CFG_HELPERS_H */
-
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-s3c/include/plat/gpio-cfg.h
deleted file mode 100644
index 29cd6a86cad..00000000000
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-/* Note, this interface is being added to the s3c64xx arch first and will
- * be added to the s3c24xx systems later.
- */
-
-#ifndef __PLAT_GPIO_CFG_H
-#define __PLAT_GPIO_CFG_H __FILE__
-
-typedef unsigned int __bitwise__ s3c_gpio_pull_t;
-
-/* forward declaration if gpio-core.h hasn't been included */
-struct s3c_gpio_chip;
-
-/**
- * struct s3c_gpio_cfg GPIO configuration
- * @cfg_eint: Configuration setting when used for external interrupt source
- * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuraiton for the GPIO
- * @set_config: Set the current configuration for the GPIO
- * @get_config: Read the current configuration for the GPIO
- *
- * Each chip can have more than one type of GPIO bank available and some
- * have different capabilites even when they have the same control register
- * layouts. Provide an point to vector control routine and provide any
- * per-bank configuration information that other systems such as the
- * external interrupt code will need.
- */
-struct s3c_gpio_cfg {
-	unsigned int	cfg_eint;
-
-	s3c_gpio_pull_t	(*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
-	int		(*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
-				    s3c_gpio_pull_t pull);
-
-	unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
-	int	 (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
-			       unsigned config);
-};
-
-#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
-#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
-
-/* Defines for generic pin configurations */
-#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
-#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
-#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
-
-#define s3c_gpio_is_cfg_special(_cfg) \
-	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
-
-/**
- * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
- * @pin pin The pin number to configure.
- * @pin to The configuration for the pin's function.
- *
- * Configure which function is actually connected to the external
- * pin, such as an gpio input, output or some form of special function
- * connected to an internal peripheral block.
- */
-extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
-
-/* Define values for the pull-{up,down} available for each gpio pin.
- *
- * These values control the state of the weak pull-{up,down} resistors
- * available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependant on the chip that is being
- * used to whether the particular mode is available.
- */
-#define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN	((__force s3c_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP	((__force s3c_gpio_pull_t)0x02)
-
-/**
- * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
- * @pin: The pin number to configure the pull resistor.
- * @pull: The configuration for the pull resistor.
- *
- * This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successfull, or a negative error
- * code if the pin cannot support the requested pull setting.
-*/
-extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
-
-/**
- * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the pull resistor value for the specified pin.
-*/
-extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
-
-#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
deleted file mode 100644
index 32af612767a..00000000000
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Define the core gpiolib support functions that the s3c platforms may
- * need to extend or change depending on the hardware and the s3c chip
- * selected at build or found at run time.
- *
- * These definitions are not intended for driver inclusion, there is
- * nothing here that should not live outside the platform and core
- * specific code.
-*/
-
-struct s3c_gpio_chip;
-
-/**
- * struct s3c_gpio_pm - power management (suspend/resume) information
- * @save: Routine to save the state of the GPIO block
- * @resume: Routine to resume the GPIO block.
- */
-struct s3c_gpio_pm {
-	void (*save)(struct s3c_gpio_chip *chip);
-	void (*resume)(struct s3c_gpio_chip *chip);
-};
-
-struct s3c_gpio_cfg;
-
-/**
- * struct s3c_gpio_chip - wrapper for specific implementation of gpio
- * @chip: The chip structure to be exported via gpiolib.
- * @base: The base pointer to the gpio configuration registers.
- * @config: special function and pull-resistor control information.
- * @pm_save: Save information for suspend/resume support.
- *
- * This wrapper provides the necessary information for the Samsung
- * specific gpios being registered with gpiolib.
- */
-struct s3c_gpio_chip {
-	struct gpio_chip	chip;
-	struct s3c_gpio_cfg	*config;
-	struct s3c_gpio_pm	*pm;
-	void __iomem		*base;
-#ifdef CONFIG_PM
-	u32			pm_save[4];
-#endif
-};
-
-static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
-{
-	return container_of(gpc, struct s3c_gpio_chip, chip);
-}
-
-/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
-
-/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own s3c_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
-{
-	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
-}
-#else
-/* machine specific code should provide s3c_gpiolib_getchip */
-
-static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
-#endif
-
-#ifdef CONFIG_PM
-extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
-#define __gpio_pm(x) x
-#else
-#define s3c_gpio_pm_1bit NULL
-#define s3c_gpio_pm_2bit NULL
-#define s3c_gpio_pm_4bit NULL
-#define __gpio_pm(x) NULL
-
-#endif /* CONFIG_PM */
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
deleted file mode 100644
index 1ba88ea0aa3..00000000000
--- a/arch/arm/plat-s3c/include/plat/hwmon.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
-	const char	*name;
-	unsigned int	mult;
-	unsigned int	div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
-	struct s3c_hwmon_chcfg	*in[8];
-};
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-s3c/include/plat/iic-core.h
deleted file mode 100644
index 36397ca2096..00000000000
--- a/arch/arm/plat-s3c/include/plat/iic-core.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/iic-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_CORE_H
-#define __ASM_ARCH_IIC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_i2c0_setname(char *name)
-{
-	/* currently this device is always compiled in */
-	s3c_device_i2c0.name = name;
-}
-
-static inline void s3c_i2c1_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C1
-	s3c_device_i2c1.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
deleted file mode 100644
index 3083df00dee..00000000000
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/**
- *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
- *	@bus_num: The bus number to use (if possible).
- *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- *	@slave_addr: The I2C address for the slave device (if enabled).
- *	@frequency: The desired frequency in Hz of the bus.  This is
- *                  guaranteed to not be exceeded.  If the caller does
- *                  not care, use zero and the driver will select a
- *                  useful default.
- *	@sda_delay: The delay (in ns) applied to SDA edges.
- *	@cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
-	int		bus_num;
-	unsigned int	flags;
-	unsigned int	slave_addr;
-	unsigned long	frequency;
-	unsigned int	sda_delay;
-
-	void	(*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
deleted file mode 100644
index 226147b7e02..00000000000
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
- * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
- *			Setting this flag will allow the kernel to
- *			look for it at boot time and also skip the NAND
- *			scan.
- * @options:		Default value to set into 'struct nand_chip' options.
- * @nr_chips:		Number of chips in this set
- * @nr_partitions:	Number of partitions pointed to by @partitions
- * @name:		Name of set (optional)
- * @nr_map:		Map for low-layer logical to physical chip numbers (option)
- * @partitions:		The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
-	unsigned int		flash_bbt:1;
-
-	unsigned int		options;
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc:1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 7a797192fcf..2543bd227f2 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -111,7 +111,7 @@ extern int s3c24xx_irq_resume(struct sys_device *dev);
 
 /* PM debug functions */
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 /**
  * s3c_pm_dbg() - low level debug function for use in suspend/resume.
  * @msg: The message to print.
@@ -141,7 +141,7 @@ static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
 
 /* suspend memory checking */
 
-#ifdef CONFIG_S3C2410_PM_CHECK
+#ifdef CONFIG_SAMSUNG_PM_CHECK
 extern void s3c_pm_check_prepare(void);
 extern void s3c_pm_check_restore(void);
 extern void s3c_pm_check_cleanup(void);
diff --git a/arch/arm/plat-s3c/include/plat/regs-ac97.h b/arch/arm/plat-s3c/include/plat/regs-ac97.h
deleted file mode 100644
index c3878f7acb8..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-ac97.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
- *
- * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 AC97 Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H __FILE__
-
-#define S3C_AC97_GLBCTRL				(0x00)
-
-#define S3C_AC97_GLBCTRL_CODECREADYIE			(1<<22)
-#define S3C_AC97_GLBCTRL_PCMOUTURIE			(1<<21)
-#define S3C_AC97_GLBCTRL_PCMINORIE			(1<<20)
-#define S3C_AC97_GLBCTRL_MICINORIE			(1<<19)
-#define S3C_AC97_GLBCTRL_PCMOUTTIE			(1<<18)
-#define S3C_AC97_GLBCTRL_PCMINTIE			(1<<17)
-#define S3C_AC97_GLBCTRL_MICINTIE			(1<<16)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF			(0<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO			(1<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA			(2<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK			(3<<12)
-#define S3C_AC97_GLBCTRL_PCMINTM_OFF			(0<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_PIO			(1<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_DMA			(2<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_MASK			(3<<10)
-#define S3C_AC97_GLBCTRL_MICINTM_OFF			(0<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_PIO			(1<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_DMA			(2<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_MASK			(3<<8)
-#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE		(1<<3)
-#define S3C_AC97_GLBCTRL_ACLINKON			(1<<2)
-#define S3C_AC97_GLBCTRL_WARMRESET			(1<<1)
-#define S3C_AC97_GLBCTRL_COLDRESET			(1<<0)
-
-#define S3C_AC97_GLBSTAT				(0x04)
-
-#define S3C_AC97_GLBSTAT_CODECREADY			(1<<22)
-#define S3C_AC97_GLBSTAT_PCMOUTUR			(1<<21)
-#define S3C_AC97_GLBSTAT_PCMINORI			(1<<20)
-#define S3C_AC97_GLBSTAT_MICINORI			(1<<19)
-#define S3C_AC97_GLBSTAT_PCMOUTTI			(1<<18)
-#define S3C_AC97_GLBSTAT_PCMINTI			(1<<17)
-#define S3C_AC97_GLBSTAT_MICINTI			(1<<16)
-#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE			(0<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_INIT			(1<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_READY		(2<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE		(3<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_LP			(4<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_WARM			(5<<0)
-
-#define S3C_AC97_CODEC_CMD				(0x08)
-
-#define S3C_AC97_CODEC_CMD_READ				(1<<23)
-
-#define S3C_AC97_STAT					(0x0c)
-#define S3C_AC97_PCM_ADDR				(0x10)
-#define S3C_AC97_PCM_DATA				(0x18)
-#define S3C_AC97_MIC_DATA				(0x1C)
-
-#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-s3c/include/plat/regs-adc.h
deleted file mode 100644
index 4323cccc86c..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-adc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
- *
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * This program is free software; yosu can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 ADC registers
-*/
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-
-
-/* ADCCON Register Bits */
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-s3c/include/plat/regs-iic.h
deleted file mode 100644
index 2f7c17de8ac..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-s3c/include/plat/regs-irqtype.h
deleted file mode 100644
index c63cd3fc5ad..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-irqtype.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C - IRQ detection types.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
- * the S3C64XX
-*/
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h
deleted file mode 100644
index 238efea7b9e..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-nand.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
- *	http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 NAND register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND
-
-
-#define S3C2410_NFREG(x) (x)
-
-#define S3C2410_NFCONF  S3C2410_NFREG(0x00)
-#define S3C2410_NFCMD   S3C2410_NFREG(0x04)
-#define S3C2410_NFADDR  S3C2410_NFREG(0x08)
-#define S3C2410_NFDATA  S3C2410_NFREG(0x0C)
-#define S3C2410_NFSTAT  S3C2410_NFREG(0x10)
-#define S3C2410_NFECC   S3C2410_NFREG(0x14)
-
-#define S3C2440_NFCONT   S3C2410_NFREG(0x04)
-#define S3C2440_NFCMD    S3C2410_NFREG(0x08)
-#define S3C2440_NFADDR   S3C2410_NFREG(0x0C)
-#define S3C2440_NFDATA   S3C2410_NFREG(0x10)
-#define S3C2440_NFECCD0  S3C2410_NFREG(0x14)
-#define S3C2440_NFECCD1  S3C2410_NFREG(0x18)
-#define S3C2440_NFECCD   S3C2410_NFREG(0x1C)
-#define S3C2440_NFSTAT   S3C2410_NFREG(0x20)
-#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
-#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
-#define S3C2440_NFMECC0  S3C2410_NFREG(0x2C)
-#define S3C2440_NFMECC1  S3C2410_NFREG(0x30)
-#define S3C2440_NFSECC   S3C2410_NFREG(0x34)
-#define S3C2440_NFSBLK   S3C2410_NFREG(0x38)
-#define S3C2440_NFEBLK   S3C2410_NFREG(0x3C)
-
-#define S3C2412_NFSBLK		S3C2410_NFREG(0x20)
-#define S3C2412_NFEBLK		S3C2410_NFREG(0x24)
-#define S3C2412_NFSTAT		S3C2410_NFREG(0x28)
-#define S3C2412_NFMECC_ERR0	S3C2410_NFREG(0x2C)
-#define S3C2412_NFMECC_ERR1	S3C2410_NFREG(0x30)
-#define S3C2412_NFMECC0		S3C2410_NFREG(0x34)
-#define S3C2412_NFMECC1		S3C2410_NFREG(0x38)
-#define S3C2412_NFSECC		S3C2410_NFREG(0x3C)
-
-#define S3C2410_NFCONF_EN          (1<<15)
-#define S3C2410_NFCONF_512BYTE     (1<<14)
-#define S3C2410_NFCONF_4STEP       (1<<13)
-#define S3C2410_NFCONF_INITECC     (1<<12)
-#define S3C2410_NFCONF_nFCE        (1<<11)
-#define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
-#define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
-#define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
-
-#define S3C2410_NFSTAT_BUSY        (1<<0)
-
-#define S3C2440_NFCONF_BUSWIDTH_8	(0<<0)
-#define S3C2440_NFCONF_BUSWIDTH_16	(1<<0)
-#define S3C2440_NFCONF_ADVFLASH		(1<<3)
-#define S3C2440_NFCONF_TACLS(x)		((x)<<12)
-#define S3C2440_NFCONF_TWRPH0(x)	((x)<<8)
-#define S3C2440_NFCONF_TWRPH1(x)	((x)<<4)
-
-#define S3C2440_NFCONT_LOCKTIGHT	(1<<13)
-#define S3C2440_NFCONT_SOFTLOCK		(1<<12)
-#define S3C2440_NFCONT_ILLEGALACC_EN	(1<<10)
-#define S3C2440_NFCONT_RNBINT_EN	(1<<9)
-#define S3C2440_NFCONT_RN_FALLING	(1<<8)
-#define S3C2440_NFCONT_SPARE_ECCLOCK	(1<<6)
-#define S3C2440_NFCONT_MAIN_ECCLOCK	(1<<5)
-#define S3C2440_NFCONT_INITECC		(1<<4)
-#define S3C2440_NFCONT_nFCE		(1<<1)
-#define S3C2440_NFCONT_ENABLE		(1<<0)
-
-#define S3C2440_NFSTAT_READY		(1<<0)
-#define S3C2440_NFSTAT_nCE		(1<<1)
-#define S3C2440_NFSTAT_RnB_CHANGE	(1<<2)
-#define S3C2440_NFSTAT_ILLEGAL_ACCESS	(1<<3)
-
-#define S3C2412_NFCONF_NANDBOOT		(1<<31)
-#define S3C2412_NFCONF_ECCCLKCON	(1<<30)
-#define S3C2412_NFCONF_ECC_MLC		(1<<24)
-#define S3C2412_NFCONF_TACLS_MASK	(7<<12)	/* 1 extra bit of Tacls */
-
-#define S3C2412_NFCONT_ECC4_DIRWR	(1<<18)
-#define S3C2412_NFCONT_LOCKTIGHT	(1<<17)
-#define S3C2412_NFCONT_SOFTLOCK		(1<<16)
-#define S3C2412_NFCONT_ECC4_ENCINT	(1<<13)
-#define S3C2412_NFCONT_ECC4_DECINT	(1<<12)
-#define S3C2412_NFCONT_MAIN_ECC_LOCK	(1<<7)
-#define S3C2412_NFCONT_INIT_MAIN_ECC	(1<<5)
-#define S3C2412_NFCONT_nFCE1		(1<<2)
-#define S3C2412_NFCONT_nFCE0		(1<<1)
-
-#define S3C2412_NFSTAT_ECC_ENCDONE	(1<<7)
-#define S3C2412_NFSTAT_ECC_DECDONE	(1<<6)
-#define S3C2412_NFSTAT_ILLEGAL_ACCESS	(1<<5)
-#define S3C2412_NFSTAT_RnB_CHANGE	(1<<4)
-#define S3C2412_NFSTAT_nFCE1		(1<<3)
-#define S3C2412_NFSTAT_nFCE0		(1<<2)
-#define S3C2412_NFSTAT_Res1		(1<<1)
-#define S3C2412_NFSTAT_READY		(1<<0)
-
-#define S3C2412_NFECCERR_SERRDATA(x)	(((x) >> 21) & 0xf)
-#define S3C2412_NFECCERR_SERRBIT(x)	(((x) >> 18) & 0x7)
-#define S3C2412_NFECCERR_MERRDATA(x)	(((x) >> 7) & 0x3ff)
-#define S3C2412_NFECCERR_MERRBIT(x)	(((x) >> 4) & 0x7)
-#define S3C2412_NFECCERR_SPARE_ERR(x)	(((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_MAIN_ERR(x)	(((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_NONE		(0)
-#define S3C2412_NFECCERR_1BIT		(1)
-#define S3C2412_NFECCERR_MULTIBIT	(2)
-#define S3C2412_NFECCERR_ECCAREA	(3)
-
-
-
-#endif /* __ASM_ARM_REGS_NAND */
-
diff --git a/arch/arm/plat-s3c/include/plat/regs-rtc.h b/arch/arm/plat-s3c/include/plat/regs-rtc.h
deleted file mode 100644
index d5837cf8e40..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-rtc.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Internal RTC register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_RTC_H
-#define __ASM_ARCH_REGS_RTC_H __FILE__
-
-#define S3C2410_RTCREG(x) (x)
-
-#define S3C2410_RTCCON	      S3C2410_RTCREG(0x40)
-#define S3C2410_RTCCON_RTCEN  (1<<0)
-#define S3C2410_RTCCON_CLKSEL (1<<1)
-#define S3C2410_RTCCON_CNTSEL (1<<2)
-#define S3C2410_RTCCON_CLKRST (1<<3)
-
-#define S3C2410_TICNT	      S3C2410_RTCREG(0x44)
-#define S3C2410_TICNT_ENABLE  (1<<7)
-
-#define S3C2410_RTCALM	      S3C2410_RTCREG(0x50)
-#define S3C2410_RTCALM_ALMEN  (1<<6)
-#define S3C2410_RTCALM_YEAREN (1<<5)
-#define S3C2410_RTCALM_MONEN  (1<<4)
-#define S3C2410_RTCALM_DAYEN  (1<<3)
-#define S3C2410_RTCALM_HOUREN (1<<2)
-#define S3C2410_RTCALM_MINEN  (1<<1)
-#define S3C2410_RTCALM_SECEN  (1<<0)
-
-#define S3C2410_RTCALM_ALL \
-  S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
-  S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
-  S3C2410_RTCALM_SECEN
-
-
-#define S3C2410_ALMSEC	      S3C2410_RTCREG(0x54)
-#define S3C2410_ALMMIN	      S3C2410_RTCREG(0x58)
-#define S3C2410_ALMHOUR	      S3C2410_RTCREG(0x5c)
-
-#define S3C2410_ALMDATE	      S3C2410_RTCREG(0x60)
-#define S3C2410_ALMMON	      S3C2410_RTCREG(0x64)
-#define S3C2410_ALMYEAR	      S3C2410_RTCREG(0x68)
-
-#define S3C2410_RTCRST	      S3C2410_RTCREG(0x6c)
-
-#define S3C2410_RTCSEC	      S3C2410_RTCREG(0x70)
-#define S3C2410_RTCMIN	      S3C2410_RTCREG(0x74)
-#define S3C2410_RTCHOUR	      S3C2410_RTCREG(0x78)
-#define S3C2410_RTCDATE	      S3C2410_RTCREG(0x7c)
-#define S3C2410_RTCDAY	      S3C2410_RTCREG(0x80)
-#define S3C2410_RTCMON	      S3C2410_RTCREG(0x84)
-#define S3C2410_RTCYEAR	      S3C2410_RTCREG(0x88)
-
-
-#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
deleted file mode 100644
index abf2fbc2eb2..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
- *
- * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
-#define __ASM_ARCH_REGS_S3C2412_IIS_H
-
-#define S3C2412_IISCON			(0x00)
-#define S3C2412_IISMOD			(0x04)
-#define S3C2412_IISFIC			(0x08)
-#define S3C2412_IISPSR			(0x0C)
-#define S3C2412_IISTXD			(0x10)
-#define S3C2412_IISRXD			(0x14)
-
-#define S3C2412_IISCON_LRINDEX		(1 << 11)
-#define S3C2412_IISCON_TXFIFO_EMPTY	(1 << 10)
-#define S3C2412_IISCON_RXFIFO_EMPTY	(1 << 9)
-#define S3C2412_IISCON_TXFIFO_FULL	(1 << 8)
-#define S3C2412_IISCON_RXFIFO_FULL	(1 << 7)
-#define S3C2412_IISCON_TXDMA_PAUSE	(1 << 6)
-#define S3C2412_IISCON_RXDMA_PAUSE	(1 << 5)
-#define S3C2412_IISCON_TXCH_PAUSE	(1 << 4)
-#define S3C2412_IISCON_RXCH_PAUSE	(1 << 3)
-#define S3C2412_IISCON_TXDMA_ACTIVE	(1 << 2)
-#define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
-#define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
-
-#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
-#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
-#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
-#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
-
-#define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
-#define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
-
-#define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
-#define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
-#define S3C2412_IISMOD_SLAVE		(2 << 10)
-#define S3C2412_IISMOD_MASTER_MASK	(3 << 10)
-#define S3C2412_IISMOD_MODE_TXONLY	(0 << 8)
-#define S3C2412_IISMOD_MODE_RXONLY	(1 << 8)
-#define S3C2412_IISMOD_MODE_TXRX	(2 << 8)
-#define S3C2412_IISMOD_MODE_MASK	(3 << 8)
-#define S3C2412_IISMOD_LR_LLOW		(0 << 7)
-#define S3C2412_IISMOD_LR_RLOW		(1 << 7)
-#define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
-#define S3C2412_IISMOD_SDF_MASK		(3 << 5)
-#define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
-#define S3C2412_IISMOD_RCLK_512FS	(1 << 3)
-#define S3C2412_IISMOD_RCLK_384FS	(2 << 3)
-#define S3C2412_IISMOD_RCLK_768FS	(3 << 3)
-#define S3C2412_IISMOD_RCLK_MASK 	(3 << 3)
-#define S3C2412_IISMOD_BCLK_32FS	(0 << 1)
-#define S3C2412_IISMOD_BCLK_48FS	(1 << 1)
-#define S3C2412_IISMOD_BCLK_16FS	(2 << 1)
-#define S3C2412_IISMOD_BCLK_24FS	(3 << 1)
-#define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
-#define S3C2412_IISMOD_8BIT		(1 << 0)
-
-#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
-
-#define S3C2412_IISPSR_PSREN		(1 << 15)
-
-#define S3C2412_IISFIC_TXFLUSH		(1 << 15)
-#define S3C2412_IISFIC_RXFLUSH		(1 << 7)
-#define S3C2412_IISFIC_TXCOUNT(x)	(((x) >>  8) & 0xf)
-#define S3C2412_IISFIC_RXCOUNT(x)	(((x) >>  0) & 0xf)
-
-
-
-#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
-
diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-s3c/include/plat/regs-sdhci.h
deleted file mode 100644
index e34049ad44c..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-sdhci.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - SDHCI (HSMMC) register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_SDHCI_REGS_H
-#define __PLAT_S3C_SDHCI_REGS_H __FILE__
-
-#define S3C_SDHCI_CONTROL2			(0x80)
-#define S3C_SDHCI_CONTROL3			(0x84)
-#define S3C64XX_SDHCI_CONTROL4			(0x8C)
-
-#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	(1 << 31)
-#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		(1 << 30)
-#define S3C_SDHCI_CTRL2_CDINVRXD3		(1 << 29)
-#define S3C_SDHCI_CTRL2_SLCARDOUT		(1 << 28)
-
-#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
-#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
-#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
-
-#define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
-#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
-#define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
-
-#define S3C_SDHCI_CTRL2_ENFBCLKTX		(1 << 15)
-#define S3C_SDHCI_CTRL2_ENFBCLKRX		(1 << 14)
-#define S3C_SDHCI_CTRL2_SDCDSEL			(1 << 13)
-#define S3C_SDHCI_CTRL2_SDSIGPC			(1 << 12)
-#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	(1 << 11)
-
-#define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
-#define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
-
-#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		(1 << 8)
-#define S3C_SDHCI_CTRL2_RWAITMODE		(1 << 7)
-#define S3C_SDHCI_CTRL2_DISBUFRD		(1 << 6)
-#define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
-#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
-#define S3C_SDHCI_CTRL2_PWRSYNC			(1 << 3)
-#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		(1 << 1)
-#define S3C_SDHCI_CTRL2_HWINITFIN		(1 << 0)
-
-#define S3C_SDHCI_CTRL3_FCSEL3			(1 << 31)
-#define S3C_SDHCI_CTRL3_FCSEL2			(1 << 23)
-#define S3C_SDHCI_CTRL3_FCSEL1			(1 << 15)
-#define S3C_SDHCI_CTRL3_FCSEL0			(1 << 7)
-
-#define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
-#define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
-#define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
-
-#define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
-#define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
-#define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
-
-#define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
-#define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
-#define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
-
-#define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
-#define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
-#define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
-
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
-
-#define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
-
-#endif /* __PLAT_S3C_SDHCI_REGS_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 85d8904e7f2..60d6604185e 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -194,6 +194,36 @@
 #define S3C64XX_UINTSP		0x34
 #define S3C64XX_UINTM		0x38
 
+/* Following are specific to S5PV210 and S5P6442 */
+#define S5PV210_UCON_CLKMASK	(1<<10)
+#define S5PV210_UCON_PCLK	(0<<10)
+#define S5PV210_UCON_UCLK	(1<<10)
+
+#define S5PV210_UFCON_TXTRIG0	(0<<8)
+#define S5PV210_UFCON_TXTRIG4	(1<<8)
+#define S5PV210_UFCON_TXTRIG8	(2<<8)
+#define S5PV210_UFCON_TXTRIG16	(3<<8)
+#define S5PV210_UFCON_TXTRIG32	(4<<8)
+#define S5PV210_UFCON_TXTRIG64	(5<<8)
+#define S5PV210_UFCON_TXTRIG128 (6<<8)
+#define S5PV210_UFCON_TXTRIG256 (7<<8)
+
+#define S5PV210_UFCON_RXTRIG1	(0<<4)
+#define S5PV210_UFCON_RXTRIG4	(1<<4)
+#define S5PV210_UFCON_RXTRIG8	(2<<4)
+#define S5PV210_UFCON_RXTRIG16	(3<<4)
+#define S5PV210_UFCON_RXTRIG32	(4<<4)
+#define S5PV210_UFCON_RXTRIG64	(5<<4)
+#define S5PV210_UFCON_RXTRIG128	(6<<4)
+#define S5PV210_UFCON_RXTRIG256	(7<<4)
+
+#define S5PV210_UFSTAT_TXFULL	(1<<24)
+#define S5PV210_UFSTAT_RXFULL	(1<<8)
+#define S5PV210_UFSTAT_TXMASK	(255<<16)
+#define S5PV210_UFSTAT_TXSHIFT	(16)
+#define S5PV210_UFSTAT_RXMASK	(255<<0)
+#define S5PV210_UFSTAT_RXSHIFT	(0)
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h
deleted file mode 100644
index d097d92f8cc..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-timer.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Timer configuration
-*/
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
-#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
-
-#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
-#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
-#define S3C2410_TCON	      S3C_TIMERREG(0x08)
-
-#define S3C64XX_TINT_CSTAT    S3C_TIMERREG(0x44)
-
-#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
-#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
-#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
-#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
-#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
-#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
-#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
-#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
-#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
-#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
-#define S3C2410_TCFG1_MUX4_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
-#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
-#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
-#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
-#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
-#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
-
-
-#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
-#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
-#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
-#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
-#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
-#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
-
-
-#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
-#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
-#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
-#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
-#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
-#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
-
-#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
-#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
-#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
-#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
-#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C64XX_TCFG1_MUX_DIV1	  (0<<0)
-#define S3C64XX_TCFG1_MUX_DIV2	  (1<<0)
-#define S3C64XX_TCFG1_MUX_DIV4	  (2<<0)
-#define S3C64XX_TCFG1_MUX_DIV8    (3<<0)
-#define S3C64XX_TCFG1_MUX_DIV16   (4<<0)
-#define S3C64XX_TCFG1_MUX_TCLK    (5<<0)  /* 3 sets of TCLK */
-#define S3C64XX_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
-
-/* for each timer, we have an count buffer, an compare buffer and
- * an observation buffer
-*/
-
-/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
-
-#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
-#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
-#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
-
-#define S3C2410_TCON_T4RELOAD	  (1<<22)
-#define S3C2410_TCON_T4MANUALUPD  (1<<21)
-#define S3C2410_TCON_T4START	  (1<<20)
-
-#define S3C2410_TCON_T3RELOAD	  (1<<19)
-#define S3C2410_TCON_T3INVERT	  (1<<18)
-#define S3C2410_TCON_T3MANUALUPD  (1<<17)
-#define S3C2410_TCON_T3START	  (1<<16)
-
-#define S3C2410_TCON_T2RELOAD	  (1<<15)
-#define S3C2410_TCON_T2INVERT	  (1<<14)
-#define S3C2410_TCON_T2MANUALUPD  (1<<13)
-#define S3C2410_TCON_T2START	  (1<<12)
-
-#define S3C2410_TCON_T1RELOAD	  (1<<11)
-#define S3C2410_TCON_T1INVERT	  (1<<10)
-#define S3C2410_TCON_T1MANUALUPD  (1<<9)
-#define S3C2410_TCON_T1START	  (1<<8)
-
-#define S3C2410_TCON_T0DEADZONE	  (1<<4)
-#define S3C2410_TCON_T0RELOAD	  (1<<3)
-#define S3C2410_TCON_T0INVERT	  (1<<2)
-#define S3C2410_TCON_T0MANUALUPD  (1<<1)
-#define S3C2410_TCON_T0START	  (1<<0)
-
-#endif /*  __ASM_ARCH_REGS_TIMER_H */
-
-
-
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
deleted file mode 100644
index 36a85f5000c..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device PHY registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Note, this is a seperate header file as some of the clock framework
- * needs to touch this if the clk_48m is used as the USB OHCI or other
- * peripheral source.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
-
-/* S3C64XX_PA_USB_HSPHY */
-
-#define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
-
-#define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
-#define SRC_PHYPWR_OTG_DISABLE			(1 << 4)
-#define SRC_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
-#define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
-
-#define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
-#define S3C_PHYCLK_MODE_USB11			(1 << 6)
-#define S3C_PHYCLK_EXT_OSC			(1 << 5)
-#define S3C_PHYCLK_CLK_FORCE			(1 << 4)
-#define S3C_PHYCLK_ID_PULL			(1 << 2)
-#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
-#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
-#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
-#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
-#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
-
-#define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
-#define S3C_RSTCON_PHYCLK			(1 << 2)
-#define S3C_RSTCON_HCLK				(1 << 2)
-#define S3C_RSTCON_PHY				(1 << 0)
-
-#define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
deleted file mode 100644
index 8d18d9d4d14..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device block registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__
-
-#define S3C_HSOTG_REG(x) (x)
-
-#define S3C_GOTGCTL				S3C_HSOTG_REG(0x000)
-#define S3C_GOTGCTL_BSESVLD			(1 << 19)
-#define S3C_GOTGCTL_ASESVLD			(1 << 18)
-#define S3C_GOTGCTL_DBNC_SHORT			(1 << 17)
-#define S3C_GOTGCTL_CONID_B			(1 << 16)
-#define S3C_GOTGCTL_DEVHNPEN			(1 << 11)
-#define S3C_GOTGCTL_HSSETHNPEN			(1 << 10)
-#define S3C_GOTGCTL_HNPREQ			(1 << 9)
-#define S3C_GOTGCTL_HSTNEGSCS			(1 << 8)
-#define S3C_GOTGCTL_SESREQ			(1 << 1)
-#define S3C_GOTGCTL_SESREQSCS			(1 << 0)
-
-#define S3C_GOTGINT				S3C_HSOTG_REG(0x004)
-#define S3C_GOTGINT_DbnceDone			(1 << 19)
-#define S3C_GOTGINT_ADevTOUTChg			(1 << 18)
-#define S3C_GOTGINT_HstNegDet			(1 << 17)
-#define S3C_GOTGINT_HstnegSucStsChng		(1 << 9)
-#define S3C_GOTGINT_SesReqSucStsChng		(1 << 8)
-#define S3C_GOTGINT_SesEndDet			(1 << 2)
-
-#define S3C_GAHBCFG				S3C_HSOTG_REG(0x008)
-#define S3C_GAHBCFG_PTxFEmpLvl			(1 << 8)
-#define S3C_GAHBCFG_NPTxFEmpLvl			(1 << 7)
-#define S3C_GAHBCFG_DMAEn			(1 << 5)
-#define S3C_GAHBCFG_HBstLen_MASK		(0xf << 1)
-#define S3C_GAHBCFG_HBstLen_SHIFT		(1)
-#define S3C_GAHBCFG_HBstLen_Single		(0x0 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr		(0x1 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr4		(0x3 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr8		(0x5 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr16		(0x7 << 1)
-#define S3C_GAHBCFG_GlblIntrEn			(1 << 0)
-
-#define S3C_GUSBCFG				S3C_HSOTG_REG(0x00C)
-#define S3C_GUSBCFG_PHYLPClkSel			(1 << 15)
-#define S3C_GUSBCFG_HNPCap			(1 << 9)
-#define S3C_GUSBCFG_SRPCap			(1 << 8)
-#define S3C_GUSBCFG_PHYIf16			(1 << 3)
-#define S3C_GUSBCFG_TOutCal_MASK		(0x7 << 0)
-#define S3C_GUSBCFG_TOutCal_SHIFT		(0)
-#define S3C_GUSBCFG_TOutCal_LIMIT		(0x7)
-#define S3C_GUSBCFG_TOutCal(_x)			((_x) << 0)
-
-#define S3C_GRSTCTL				S3C_HSOTG_REG(0x010)
-
-#define S3C_GRSTCTL_AHBIdle			(1 << 31)
-#define S3C_GRSTCTL_DMAReq			(1 << 30)
-#define S3C_GRSTCTL_TxFNum_MASK			(0x1f << 6)
-#define S3C_GRSTCTL_TxFNum_SHIFT		(6)
-#define S3C_GRSTCTL_TxFNum_LIMIT		(0x1f)
-#define S3C_GRSTCTL_TxFNum(_x)			((_x) << 6)
-#define S3C_GRSTCTL_TxFFlsh			(1 << 5)
-#define S3C_GRSTCTL_RxFFlsh			(1 << 4)
-#define S3C_GRSTCTL_INTknQFlsh			(1 << 3)
-#define S3C_GRSTCTL_FrmCntrRst			(1 << 2)
-#define S3C_GRSTCTL_HSftRst			(1 << 1)
-#define S3C_GRSTCTL_CSftRst			(1 << 0)
-
-#define S3C_GINTSTS				S3C_HSOTG_REG(0x014)
-#define S3C_GINTMSK				S3C_HSOTG_REG(0x018)
-
-#define S3C_GINTSTS_WkUpInt			(1 << 31)
-#define S3C_GINTSTS_SessReqInt			(1 << 30)
-#define S3C_GINTSTS_DisconnInt			(1 << 29)
-#define S3C_GINTSTS_ConIDStsChng		(1 << 28)
-#define S3C_GINTSTS_PTxFEmp			(1 << 26)
-#define S3C_GINTSTS_HChInt			(1 << 25)
-#define S3C_GINTSTS_PrtInt			(1 << 24)
-#define S3C_GINTSTS_FetSusp			(1 << 22)
-#define S3C_GINTSTS_incompIP			(1 << 21)
-#define S3C_GINTSTS_IncomplSOIN			(1 << 20)
-#define S3C_GINTSTS_OEPInt			(1 << 19)
-#define S3C_GINTSTS_IEPInt			(1 << 18)
-#define S3C_GINTSTS_EPMis			(1 << 17)
-#define S3C_GINTSTS_EOPF			(1 << 15)
-#define S3C_GINTSTS_ISOutDrop			(1 << 14)
-#define S3C_GINTSTS_EnumDone			(1 << 13)
-#define S3C_GINTSTS_USBRst			(1 << 12)
-#define S3C_GINTSTS_USBSusp			(1 << 11)
-#define S3C_GINTSTS_ErlySusp			(1 << 10)
-#define S3C_GINTSTS_GOUTNakEff			(1 << 7)
-#define S3C_GINTSTS_GINNakEff			(1 << 6)
-#define S3C_GINTSTS_NPTxFEmp			(1 << 5)
-#define S3C_GINTSTS_RxFLvl			(1 << 4)
-#define S3C_GINTSTS_SOF				(1 << 3)
-#define S3C_GINTSTS_OTGInt			(1 << 2)
-#define S3C_GINTSTS_ModeMis			(1 << 1)
-#define S3C_GINTSTS_CurMod_Host			(1 << 0)
-
-#define S3C_GRXSTSR				S3C_HSOTG_REG(0x01C)
-#define S3C_GRXSTSP				S3C_HSOTG_REG(0x020)
-
-#define S3C_GRXSTS_FN_MASK			(0x7f << 25)
-#define S3C_GRXSTS_FN_SHIFT			(25)
-
-#define S3C_GRXSTS_PktSts_MASK			(0xf << 17)
-#define S3C_GRXSTS_PktSts_SHIFT			(17)
-#define S3C_GRXSTS_PktSts_GlobalOutNAK		(0x1 << 17)
-#define S3C_GRXSTS_PktSts_OutRX			(0x2 << 17)
-#define S3C_GRXSTS_PktSts_OutDone		(0x3 << 17)
-#define S3C_GRXSTS_PktSts_SetupDone		(0x4 << 17)
-#define S3C_GRXSTS_PktSts_SetupRX		(0x6 << 17)
-
-#define S3C_GRXSTS_DPID_MASK			(0x3 << 15)
-#define S3C_GRXSTS_DPID_SHIFT			(15)
-#define S3C_GRXSTS_ByteCnt_MASK			(0x7ff << 4)
-#define S3C_GRXSTS_ByteCnt_SHIFT		(4)
-#define S3C_GRXSTS_EPNum_MASK			(0xf << 0)
-#define S3C_GRXSTS_EPNum_SHIFT			(0)
-
-#define S3C_GRXFSIZ				S3C_HSOTG_REG(0x024)
-
-#define S3C_GNPTXFSIZ				S3C_HSOTG_REG(0x028)
-
-#define S3C_GNPTXFSIZ_NPTxFDep_MASK		(0xffff << 16)
-#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT		(16)
-#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT		(0xffff)
-#define S3C_GNPTXFSIZ_NPTxFDep(_x)		((_x) << 16)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK		(0xffff << 0)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT		(0)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT		(0xffff)
-#define S3C_GNPTXFSIZ_NPTxFStAddr(_x)		((_x) << 0)
-
-#define S3C_GNPTXSTS				S3C_HSOTG_REG(0x02C)
-
-#define S3C_GNPTXSTS_NPtxQTop_MASK		(0x7f << 24)
-#define S3C_GNPTXSTS_NPtxQTop_SHIFT		(24)
-
-#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK		(0xff << 16)
-#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT	(16)
-#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v)	(((_v) >> 16) & 0xff)
-
-#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK		(0xffff << 0)
-#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT	(0)
-#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v)	(((_v) >> 0) & 0xffff)
-
-
-#define S3C_HPTXFSIZ				S3C_HSOTG_REG(0x100)
-
-#define S3C_DPTXFSIZn(_a)			S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4))
-
-#define S3C_DPTXFSIZn_DPTxFSize_MASK		(0xffff << 16)
-#define S3C_DPTXFSIZn_DPTxFSize_SHIFT		(16)
-#define S3C_DPTXFSIZn_DPTxFSize_GET(_v)		(((_v) >> 16) & 0xffff)
-#define S3C_DPTXFSIZn_DPTxFSize_LIMIT		(0xffff)
-#define S3C_DPTXFSIZn_DPTxFSize(_x)		((_x) << 16)
-
-#define S3C_DPTXFSIZn_DPTxFStAddr_MASK		(0xffff << 0)
-#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT		(0)
-
-/* Device mode registers */
-#define S3C_DCFG				S3C_HSOTG_REG(0x800)
-
-#define S3C_DCFG_EPMisCnt_MASK			(0x1f << 18)
-#define S3C_DCFG_EPMisCnt_SHIFT			(18)
-#define S3C_DCFG_EPMisCnt_LIMIT			(0x1f)
-#define S3C_DCFG_EPMisCnt(_x)			((_x) << 18)
-
-#define S3C_DCFG_PerFrInt_MASK			(0x3 << 11)
-#define S3C_DCFG_PerFrInt_SHIFT			(11)
-#define S3C_DCFG_PerFrInt_LIMIT			(0x3)
-#define S3C_DCFG_PerFrInt(_x)			((_x) << 11)
-
-#define S3C_DCFG_DevAddr_MASK			(0x7f << 4)
-#define S3C_DCFG_DevAddr_SHIFT			(4)
-#define S3C_DCFG_DevAddr_LIMIT			(0x7f)
-#define S3C_DCFG_DevAddr(_x)			((_x) << 4)
-
-#define S3C_DCFG_NZStsOUTHShk			(1 << 2)
-
-#define S3C_DCFG_DevSpd_MASK			(0x3 << 0)
-#define S3C_DCFG_DevSpd_SHIFT			(0)
-#define S3C_DCFG_DevSpd_HS			(0x0 << 0)
-#define S3C_DCFG_DevSpd_FS			(0x1 << 0)
-#define S3C_DCFG_DevSpd_LS			(0x2 << 0)
-#define S3C_DCFG_DevSpd_FS48			(0x3 << 0)
-
-#define S3C_DCTL				S3C_HSOTG_REG(0x804)
-
-#define S3C_DCTL_PWROnPrgDone			(1 << 11)
-#define S3C_DCTL_CGOUTNak			(1 << 10)
-#define S3C_DCTL_SGOUTNak			(1 << 9)
-#define S3C_DCTL_CGNPInNAK			(1 << 8)
-#define S3C_DCTL_SGNPInNAK			(1 << 7)
-#define S3C_DCTL_TstCtl_MASK			(0x7 << 4)
-#define S3C_DCTL_TstCtl_SHIFT			(4)
-#define S3C_DCTL_GOUTNakSts			(1 << 3)
-#define S3C_DCTL_GNPINNakSts			(1 << 2)
-#define S3C_DCTL_SftDiscon			(1 << 1)
-#define S3C_DCTL_RmtWkUpSig			(1 << 0)
-
-#define S3C_DSTS				S3C_HSOTG_REG(0x808)
-
-#define S3C_DSTS_SOFFN_MASK			(0x3fff << 8)
-#define S3C_DSTS_SOFFN_SHIFT			(8)
-#define S3C_DSTS_SOFFN_LIMIT			(0x3fff)
-#define S3C_DSTS_SOFFN(_x)			((_x) << 8)
-#define S3C_DSTS_ErraticErr			(1 << 3)
-#define S3C_DSTS_EnumSpd_MASK			(0x3 << 1)
-#define S3C_DSTS_EnumSpd_SHIFT			(1)
-#define S3C_DSTS_EnumSpd_HS			(0x0 << 1)
-#define S3C_DSTS_EnumSpd_FS			(0x1 << 1)
-#define S3C_DSTS_EnumSpd_LS			(0x2 << 1)
-#define S3C_DSTS_EnumSpd_FS48			(0x3 << 1)
-
-#define S3C_DSTS_SuspSts			(1 << 0)
-
-#define S3C_DIEPMSK				S3C_HSOTG_REG(0x810)
-
-#define S3C_DIEPMSK_INEPNakEffMsk		(1 << 6)
-#define S3C_DIEPMSK_INTknEPMisMsk		(1 << 5)
-#define S3C_DIEPMSK_INTknTXFEmpMsk		(1 << 4)
-#define S3C_DIEPMSK_TimeOUTMsk			(1 << 3)
-#define S3C_DIEPMSK_AHBErrMsk			(1 << 2)
-#define S3C_DIEPMSK_EPDisbldMsk			(1 << 1)
-#define S3C_DIEPMSK_XferComplMsk		(1 << 0)
-
-#define S3C_DOEPMSK				S3C_HSOTG_REG(0x814)
-
-#define S3C_DOEPMSK_Back2BackSetup		(1 << 6)
-#define S3C_DOEPMSK_OUTTknEPdisMsk		(1 << 4)
-#define S3C_DOEPMSK_SetupMsk			(1 << 3)
-#define S3C_DOEPMSK_AHBErrMsk			(1 << 2)
-#define S3C_DOEPMSK_EPDisbldMsk			(1 << 1)
-#define S3C_DOEPMSK_XferComplMsk		(1 << 0)
-
-#define S3C_DAINT				S3C_HSOTG_REG(0x818)
-#define S3C_DAINTMSK				S3C_HSOTG_REG(0x81C)
-
-#define S3C_DAINT_OutEP_SHIFT			(16)
-#define S3C_DAINT_OutEP(x)			(1 << ((x) + 16))
-#define S3C_DAINT_InEP(x)			(1 << (x))
-
-#define S3C_DTKNQR1				S3C_HSOTG_REG(0x820)
-#define S3C_DTKNQR2				S3C_HSOTG_REG(0x824)
-#define S3C_DTKNQR3				S3C_HSOTG_REG(0x830)
-#define S3C_DTKNQR4				S3C_HSOTG_REG(0x834)
-
-#define S3C_DVBUSDIS				S3C_HSOTG_REG(0x828)
-#define S3C_DVBUSPULSE				S3C_HSOTG_REG(0x82C)
-
-#define S3C_DIEPCTL0				S3C_HSOTG_REG(0x900)
-#define S3C_DOEPCTL0				S3C_HSOTG_REG(0xB00)
-#define S3C_DIEPCTL(_a)				S3C_HSOTG_REG(0x900 + ((_a) * 0x20))
-#define S3C_DOEPCTL(_a)				S3C_HSOTG_REG(0xB00 + ((_a) * 0x20))
-
-/* EP0 specialness:
- * bits[29..28] - reserved (no SetD0PID, SetD1PID)
- * bits[25..22] - should always be zero, this isn't a periodic endpoint
- * bits[10..0] - MPS setting differenct for EP0
-*/
-#define S3C_D0EPCTL_MPS_MASK			(0x3 << 0)
-#define S3C_D0EPCTL_MPS_SHIFT			(0)
-#define S3C_D0EPCTL_MPS_64			(0x0 << 0)
-#define S3C_D0EPCTL_MPS_32			(0x1 << 0)
-#define S3C_D0EPCTL_MPS_16			(0x2 << 0)
-#define S3C_D0EPCTL_MPS_8			(0x3 << 0)
-
-#define S3C_DxEPCTL_EPEna			(1 << 31)
-#define S3C_DxEPCTL_EPDis			(1 << 30)
-#define S3C_DxEPCTL_SetD1PID			(1 << 29)
-#define S3C_DxEPCTL_SetOddFr			(1 << 29)
-#define S3C_DxEPCTL_SetD0PID			(1 << 28)
-#define S3C_DxEPCTL_SetEvenFr			(1 << 28)
-#define S3C_DxEPCTL_SNAK			(1 << 27)
-#define S3C_DxEPCTL_CNAK			(1 << 26)
-#define S3C_DxEPCTL_TxFNum_MASK			(0xf << 22)
-#define S3C_DxEPCTL_TxFNum_SHIFT		(22)
-#define S3C_DxEPCTL_TxFNum_LIMIT		(0xf)
-#define S3C_DxEPCTL_TxFNum(_x)			((_x) << 22)
-
-#define S3C_DxEPCTL_Stall			(1 << 21)
-#define S3C_DxEPCTL_Snp				(1 << 20)
-#define S3C_DxEPCTL_EPType_MASK			(0x3 << 18)
-#define S3C_DxEPCTL_EPType_SHIFT		(18)
-#define S3C_DxEPCTL_EPType_Control		(0x0 << 18)
-#define S3C_DxEPCTL_EPType_Iso			(0x1 << 18)
-#define S3C_DxEPCTL_EPType_Bulk			(0x2 << 18)
-#define S3C_DxEPCTL_EPType_Intterupt		(0x3 << 18)
-
-#define S3C_DxEPCTL_NAKsts			(1 << 17)
-#define S3C_DxEPCTL_DPID			(1 << 16)
-#define S3C_DxEPCTL_EOFrNum			(1 << 16)
-#define S3C_DxEPCTL_USBActEp			(1 << 15)
-#define S3C_DxEPCTL_NextEp_MASK			(0xf << 11)
-#define S3C_DxEPCTL_NextEp_SHIFT		(11)
-#define S3C_DxEPCTL_NextEp_LIMIT		(0xf)
-#define S3C_DxEPCTL_NextEp(_x)			((_x) << 11)
-
-#define S3C_DxEPCTL_MPS_MASK			(0x7ff << 0)
-#define S3C_DxEPCTL_MPS_SHIFT			(0)
-#define S3C_DxEPCTL_MPS_LIMIT			(0x7ff)
-#define S3C_DxEPCTL_MPS(_x)			((_x) << 0)
-
-#define S3C_DIEPINT(_a)				S3C_HSOTG_REG(0x908 + ((_a) * 0x20))
-#define S3C_DOEPINT(_a)				S3C_HSOTG_REG(0xB08 + ((_a) * 0x20))
-
-#define S3C_DxEPINT_INEPNakEff			(1 << 6)
-#define S3C_DxEPINT_Back2BackSetup		(1 << 6)
-#define S3C_DxEPINT_INTknEPMis			(1 << 5)
-#define S3C_DxEPINT_INTknTXFEmp			(1 << 4)
-#define S3C_DxEPINT_OUTTknEPdis			(1 << 4)
-#define S3C_DxEPINT_Timeout			(1 << 3)
-#define S3C_DxEPINT_Setup			(1 << 3)
-#define S3C_DxEPINT_AHBErr			(1 << 2)
-#define S3C_DxEPINT_EPDisbld			(1 << 1)
-#define S3C_DxEPINT_XferCompl			(1 << 0)
-
-#define S3C_DIEPTSIZ0				S3C_HSOTG_REG(0x910)
-
-#define S3C_DIEPTSIZ0_PktCnt_MASK		(0x3 << 19)
-#define S3C_DIEPTSIZ0_PktCnt_SHIFT		(19)
-#define S3C_DIEPTSIZ0_PktCnt_LIMIT		(0x3)
-#define S3C_DIEPTSIZ0_PktCnt(_x)		((_x) << 19)
-
-#define S3C_DIEPTSIZ0_XferSize_MASK		(0x7f << 0)
-#define S3C_DIEPTSIZ0_XferSize_SHIFT		(0)
-#define S3C_DIEPTSIZ0_XferSize_LIMIT		(0x7f)
-#define S3C_DIEPTSIZ0_XferSize(_x)		((_x) << 0)
-
-
-#define DOEPTSIZ0				S3C_HSOTG_REG(0xB10)
-#define S3C_DOEPTSIZ0_SUPCnt_MASK		(0x3 << 29)
-#define S3C_DOEPTSIZ0_SUPCnt_SHIFT		(29)
-#define S3C_DOEPTSIZ0_SUPCnt_LIMIT		(0x3)
-#define S3C_DOEPTSIZ0_SUPCnt(_x)		((_x) << 29)
-
-#define S3C_DOEPTSIZ0_PktCnt			(1 << 19)
-#define S3C_DOEPTSIZ0_XferSize_MASK		(0x7f << 0)
-#define S3C_DOEPTSIZ0_XferSize_SHIFT		(0)
-
-#define S3C_DIEPTSIZ(_a)			S3C_HSOTG_REG(0x910 + ((_a) * 0x20))
-#define S3C_DOEPTSIZ(_a)			S3C_HSOTG_REG(0xB10 + ((_a) * 0x20))
-
-#define S3C_DxEPTSIZ_MC_MASK			(0x3 << 29)
-#define S3C_DxEPTSIZ_MC_SHIFT			(29)
-#define S3C_DxEPTSIZ_MC_LIMIT			(0x3)
-#define S3C_DxEPTSIZ_MC(_x)			((_x) << 29)
-
-#define S3C_DxEPTSIZ_PktCnt_MASK		(0x3ff << 19)
-#define S3C_DxEPTSIZ_PktCnt_SHIFT		(19)
-#define S3C_DxEPTSIZ_PktCnt_GET(_v)		(((_v) >> 19) & 0x3ff)
-#define S3C_DxEPTSIZ_PktCnt_LIMIT		(0x3ff)
-#define S3C_DxEPTSIZ_PktCnt(_x)			((_x) << 19)
-
-#define S3C_DxEPTSIZ_XferSize_MASK		(0x7ffff << 0)
-#define S3C_DxEPTSIZ_XferSize_SHIFT		(0)
-#define S3C_DxEPTSIZ_XferSize_GET(_v)		(((_v) >> 0) & 0x7ffff)
-#define S3C_DxEPTSIZ_XferSize_LIMIT		(0x7ffff)
-#define S3C_DxEPTSIZ_XferSize(_x)		((_x) << 0)
-
-
-#define S3C_DIEPDMA(_a)				S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
-#define S3C_DOEPDMA(_a)				S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
-
-#define S3C_EPFIFO(_a)				S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-watchdog.h b/arch/arm/plat-s3c/include/plat/regs-watchdog.h
deleted file mode 100644
index 4938492470f..00000000000
--- a/arch/arm/plat-s3c/include/plat/regs-watchdog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Watchdog timer control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H
-
-#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
-
-#define S3C2410_WTCON	   S3C_WDOGREG(0x00)
-#define S3C2410_WTDAT	   S3C_WDOGREG(0x04)
-#define S3C2410_WTCNT	   S3C_WDOGREG(0x08)
-
-/* the watchdog can either generate a reset pulse, or an
- * interrupt.
- */
-
-#define S3C2410_WTCON_RSTEN   (0x01)
-#define S3C2410_WTCON_INTEN   (1<<2)
-#define S3C2410_WTCON_ENABLE  (1<<5)
-
-#define S3C2410_WTCON_DIV16   (0<<3)
-#define S3C2410_WTCON_DIV32   (1<<3)
-#define S3C2410_WTCON_DIV64   (2<<3)
-#define S3C2410_WTCON_DIV128  (3<<3)
-
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
-
-#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
-
-
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
deleted file mode 100644
index 53198673b6b..00000000000
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/sdhci.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - SDHCI (HSMMC) platform data definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_SDHCI_H
-#define __PLAT_S3C_SDHCI_H __FILE__
-
-struct platform_device;
-struct mmc_host;
-struct mmc_card;
-struct mmc_ios;
-
-/**
- * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
- * @max_width: The maximum number of data bits supported.
- * @host_caps: Standard MMC host capabilities bit field.
- * @cfg_gpio: Configure the GPIO for a specific card bit-width
- * @cfg_card: Configure the interface for a specific card and speed. This
- *            is necessary the controllers and/or GPIO blocks require the
- *	      changing of driver-strength and other controls dependant on
- *	      the card and speed of operation.
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio or
- * card speed information.
-*/
-struct s3c_sdhci_platdata {
-	unsigned int	max_width;
-	unsigned int	host_caps;
-
-	char		**clocks;	/* set of clock sources */
-
-	void	(*cfg_gpio)(struct platform_device *dev, int width);
-	void	(*cfg_card)(struct platform_device *dev,
-			    void __iomem *regbase,
-			    struct mmc_ios *ios,
-			    struct mmc_card *card);
-};
-
-/**
- * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use withe S3C SDHCI device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
-
-/* Default platform data, exported so that per-cpu initialisation can
- * set the correct one when there are more than one cpu type selected.
-*/
-
-extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
-
-/* Helper function availablity */
-
-extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-
-/* S3C6400 SDHCI setup */
-
-#ifdef CONFIG_S3C6400_SETUP_SDHCI
-extern char *s3c6400_hsmmc_clksrcs[4];
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-					 void __iomem *r,
-					 struct mmc_ios *ios,
-					 struct mmc_card *card);
-
-static inline void s3c6400_default_sdhci0(void)
-{
-	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
-}
-
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-#endif  /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static inline void s3c6400_default_sdhci1(void)
-{
-	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
-}
-#else
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static inline void s3c6400_default_sdhci2(void)
-{
-	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
-	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
-}
-#else
-static inline void s3c6400_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6400_SETUP_SDHCI */
-
-/* S3C6410 SDHCI setup */
-
-#ifdef CONFIG_S3C6410_SETUP_SDHCI
-extern char *s3c6410_hsmmc_clksrcs[4];
-
-extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-static inline void s3c6410_default_sdhci0(void)
-{
-	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static inline void s3c6410_default_sdhci1(void)
-{
-	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static inline void s3c6410_default_sdhci2(void)
-{
-	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s3c6410_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6410_SETUP_SDHCI */
-
-/* S5PC100 SDHCI setup */
-
-#ifdef CONFIG_S5PC100_SETUP_SDHCI
-extern char *s5pc100_hsmmc_clksrcs[4];
-
-extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-static inline void s5pc100_default_sdhci0(void)
-{
-	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static inline void s5pc100_default_sdhci1(void)
-{
-	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s5pc100_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static inline void s5pc100_default_sdhci2(void)
-{
-	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-static inline void s5pc100_default_sdhci1(void) { }
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
-#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h
deleted file mode 100644
index dd04db04310..00000000000
--- a/arch/arm/plat-s3c/include/plat/udc-hs.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/udc-hs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C USB2.0 High-speed / OtG platform information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum s3c_hostg_dmamode {
-	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
-	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
-	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
-};
-
-/**
- * struct s3c_hsotg_plat - platform data for high-speed otg/udc
- * @dma: Whether to use DMA or not.
- * @is_osc: The clock source is an oscillator, not a crystal
- */
-struct s3c_hsotg_plat {
-	enum s3c_hostg_dmamode	dma;
-	unsigned int		is_osc : 1;
-};
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-s3c/include/plat/usb-control.h
index 822c87fe948..a6a57bf796b 100644
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ b/arch/arm/plat-s3c/include/plat/usb-control.h
@@ -38,4 +38,6 @@ static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int port
 	}
 }
 
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
 #endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
deleted file mode 100644
index 54b762acb5a..00000000000
--- a/arch/arm/plat-s3c/include/plat/watchdog-reset.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-watchdog.h>
-#include <mach/map.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-static inline void arch_wdt_reset(void)
-{
-	struct clk *wdtclk;
-
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-}
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
deleted file mode 100644
index 8eb1f439861..00000000000
--- a/arch/arm/plat-s3c/pm-check.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/* linux/arch/arm/plat-s3c/pm-check.c
- *  originally in linux/arch/arm/plat-s3c24xx/pm.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Power Mangament - suspend/resume memory corruptiuon check.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-
-#include <plat/pm.h>
-
-#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
-#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
-#endif
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size;	/* size needed for the crc block */
-static u32 *crcs;	/* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c_pm_run_res
- *
- * go through the given resource list, and look for system ram
-*/
-
-static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
-	while (ptr != NULL) {
-		if (ptr->child != NULL)
-			s3c_pm_run_res(ptr->child, fn, arg);
-
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
-			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
-				  (unsigned long)ptr->start,
-				  (unsigned long)ptr->end);
-			arg = (fn)(ptr, arg);
-		}
-
-		ptr = ptr->sibling;
-	}
-}
-
-static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
-	s3c_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c_pm_countram(struct resource *res, u32 *val)
-{
-	u32 size = (u32)(res->end - res->start)+1;
-
-	size += CHECK_CHUNKSIZE-1;
-	size /= CHECK_CHUNKSIZE;
-
-	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
-		  (unsigned long)res->start, (unsigned long)res->end, size);
-
-	*val += size * sizeof(u32);
-	return val;
-}
-
-/* s3c_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-void s3c_pm_check_prepare(void)
-{
-	crc_size = 0;
-
-	s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
-
-	S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
-
-	crcs = kmalloc(crc_size+4, GFP_KERNEL);
-	if (crcs == NULL)
-		printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
-{
-	unsigned long addr, left;
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		*val = crc32_le(~0, phys_to_virt(addr), left);
-		val++;
-	}
-
-	return val;
-}
-
-/* s3c_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-void s3c_pm_check_store(void)
-{
-	if (crcs != NULL)
-		s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contains the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
-	if ((what+whatsz) < ptr)
-		return 0;
-
-	if (what > (ptr+size))
-		return 0;
-
-	return 1;
-}
-
-/**
- * s3c_pm_runcheck() - helper to check a resource on restore.
- * @res: The resource to check
- * @vak: Pointer to list of CRC32 values to check.
- *
- * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
- * function runs the given memory resource checking it against the stored
- * CRC to ensure that memory is restored. The function tries to skip as
- * many of the areas used during the suspend process.
- */
-static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
-{
-	void *save_at = phys_to_virt(s3c_sleep_save_phys);
-	unsigned long addr;
-	unsigned long left;
-	void *stkpage;
-	void *ptr;
-	u32 calc;
-
-	stkpage = (void *)((u32)&calc & ~PAGE_MASK);
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		ptr = phys_to_virt(addr);
-
-		if (in_region(ptr, left, stkpage, 4096)) {
-			S3C_PMDBG("skipping %08lx, has stack in\n", addr);
-			goto skip_check;
-		}
-
-		if (in_region(ptr, left, crcs, crc_size)) {
-			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
-			goto skip_check;
-		}
-
-		if (in_region(ptr, left, save_at, 32*4 )) {
-			S3C_PMDBG("skipping %08lx, has save block in\n", addr);
-			goto skip_check;
-		}
-
-		/* calculate and check the checksum */
-
-		calc = crc32_le(~0, ptr, left);
-		if (calc != *val) {
-			printk(KERN_ERR "Restore CRC error at "
-			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
-			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
-			    addr, calc, *val);
-		}
-
-	skip_check:
-		val++;
-	}
-
-	return val;
-}
-
-/**
- * s3c_pm_check_restore() - memory check called on resume
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-void s3c_pm_check_restore(void)
-{
-	if (crcs != NULL)
-		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
-}
-
-/**
- * s3c_pm_check_cleanup() - free memory resources
- *
- * Free the resources that where allocated by the suspend
- * memory check code. We do this separately from the
- * s3c_pm_check_restore() function as we cannot call any
- * functions that might sleep during that resume.
- */
-void s3c_pm_check_cleanup(void)
-{
-	kfree(crcs);
-	crcs = NULL;
-}
-
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
deleted file mode 100644
index cfd326a8b69..00000000000
--- a/arch/arm/plat-s3c/pm-gpio.c
+++ /dev/null
@@ -1,380 +0,0 @@
-
-/* linux/arch/arm/plat-s3c/pm-gpio.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO PM code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/sysdev.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/gpio-core.h>
-#include <plat/pm.h>
-
-/* PM GPIO helpers */
-
-#define OFFS_CON	(0x00)
-#define OFFS_DAT	(0x04)
-#define OFFS_UP		(0x08)
-
-static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-}
-
-static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon;
-
-	/* GPACON only has one bit per control / data and no PULLUPs.
-	 * GPACON[x] = 0 => Output, 1 => SFN */
-
-	/* first set all SFN bits to SFN */
-
-	gpcon = old_gpcon | gps_gpcon;
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* now set all the other bits */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_1bit = {
-	.save	= s3c_gpio_pm_1bit_save,
-	.resume = s3c_gpio_pm_1bit_resume,
-};
-
-static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
-}
-
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return con >= 2;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
- * @chip: The chip information to resume.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon, old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	/* restore GPIO pull-up settings */
-	__raw_writel(chip->pm_save[2], base + OFFS_UP);
-
-	/* Create a change_mask of all the items that need to have
-	 * their CON value changed before their DAT value, so that
-	 * we minimise the work between the two settings.
-	 */
-
-	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-
-	/* Write the new CON settings */
-
-	gpcon = old_gpcon & ~change_mask;
-	gpcon |= gps_gpcon & change_mask;
-
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* Now change any items that require DAT,CON */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_2bit = {
-	.save	= s3c_gpio_pm_2bit_save,
-	.resume = s3c_gpio_pm_2bit_resume,
-};
-
-#ifdef CONFIG_ARCH_S3C64XX
-static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8)
-		chip->pm_save[0] = __raw_readl(chip->base - 4);
-}
-
-static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
-{
-	u32 old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-	return change_mask;
-}
-
-static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
-{
-	void __iomem *con = chip->base + (index * 4);
-	u32 old_gpcon = __raw_readl(con);
-	u32 gps_gpcon = chip->pm_save[index + 1];
-	u32 gpcon, mask;
-
-	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
-
-	gpcon = old_gpcon & ~mask;
-	gpcon |= gps_gpcon & mask;
-
-	__raw_writel(gpcon, con);
-}
-
-static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon[2];
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpdat = chip->pm_save[2];
-
-	/* First, modify the CON settings */
-
-	old_gpcon[0] = 0;
-	old_gpcon[1] = __raw_readl(base + OFFS_CON);
-
-	s3c_gpio_pm_4bit_con(chip, 0);
-	if (chip->chip.ngpio > 8) {
-		old_gpcon[0] = __raw_readl(base - 4);
-		s3c_gpio_pm_4bit_con(chip, -1);
-	}
-
-	/* Now change the configurations that require DAT,CON */
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[1], base + OFFS_CON);
-	if (chip->chip.ngpio > 8)
-		__raw_writel(chip->pm_save[0], base - 4);
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[3], base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8) {
-		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[0], old_gpcon[1],
-			  __raw_readl(base - 4),
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-	} else
-		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[1],
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_4bit = {
-	.save	= s3c_gpio_pm_4bit_save,
-	.resume = s3c_gpio_pm_4bit_resume,
-};
-#endif /* CONFIG_ARCH_S3C64XX */
-
-/**
- * s3c_pm_save_gpio() - save gpio chip data for suspend
- * @ourchip: The chip for suspend.
- */
-static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
-{
-	struct s3c_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->save == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->save(ourchip);
-}
-
-/**
- * s3c_pm_save_gpios() - Save the state of the GPIO banks.
- *
- * For all the GPIO banks, save the state of each one ready for going
- * into a suspend mode.
- */
-void s3c_pm_save_gpios(void)
-{
-	struct s3c_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
-		if (!ourchip)
-			continue;
-
-		s3c_pm_save_gpio(ourchip);
-
-		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
-			  ourchip->chip.label,
-			  ourchip->pm_save[0],
-			  ourchip->pm_save[1],
-			  ourchip->pm_save[2],
-			  ourchip->pm_save[3]);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
-
-/**
- * s3c_pm_resume_gpio() - restore gpio chip data after suspend
- * @ourchip: The suspended chip.
- */
-static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
-{
-	struct s3c_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->resume == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->resume(ourchip);
-}
-
-void s3c_pm_restore_gpios(void)
-{
-	struct s3c_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
-		if (!ourchip)
-			continue;
-
-		s3c_pm_resume_gpio(ourchip);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 767470601e5..e5eef126791 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -41,7 +41,7 @@ unsigned long s3c_pm_flags;
  * resume before the console layer is available.
 */
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 extern void printascii(const char *);
 
 void s3c_pm_dbg(const char *fmt, ...)
@@ -65,13 +65,13 @@ static inline void s3c_pm_debug_init(void)
 #else
 #define s3c_pm_debug_init() do { } while(0)
 
-#endif /* CONFIG_S3C2410_PM_DEBUG */
+#endif /* CONFIG_SAMSUNG_PM_DEBUG */
 
 /* Save the UART configurations if we are configured for debug. */
 
 unsigned char pm_uart_udivslot;
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 
 struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c
deleted file mode 100644
index a318215ab53..00000000000
--- a/arch/arm/plat-s3c/pwm-clock.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Copyright (c) 2007, 2008 Ben Dooks
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/log2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-timer.h>
-#include <mach/pwm-clock.h>
-
-/* Each of the timers 0 through 5 go through the following
- * clock tree, with the inputs depending on the timers.
- *
- * pclk ---- [ prescaler 0 ] -+---> timer 0
- *			      +---> timer 1
- *
- * pclk ---- [ prescaler 1 ] -+---> timer 2
- *			      +---> timer 3
- *			      \---> timer 4
- *
- * Which are fed into the timers as so:
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 0
- * tclk 0 ------------------------------/
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 1
- * tclk 0 ------------------------------/
- *
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 2
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 3
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8, 16 ] --\
- *				       [mux] -> timer 4
- * tclk 1 ------------------------------/
- *
- * Since the mux and the divider are tied together in the
- * same register space, it is impossible to set the parent
- * and the rate at the same time. To avoid this, we add an
- * intermediate 'prescaled-and-divided' clock to select
- * as the parent for the timer input clock called tdiv.
- *
- * prescaled clk --> pwm-tdiv ---\
- *                             [ mux ] --> timer X
- * tclk -------------------------/
-*/
-
-static struct clk clk_timer_scaler[];
-
-static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
-{
-	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
-	}
-
-	return clk_get_rate(clk->parent) / (tcfg0 + 1);
-}
-
-static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
-					       unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor = parent_rate / rate;
-
-	if (divisor > 256)
-		divisor = 256;
-	else if (divisor < 2)
-		divisor = 2;
-
-	return parent_rate / divisor;
-}
-
-static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
-	unsigned long tcfg0;
-	unsigned long divisor;
-	unsigned long flags;
-
-	divisor = clk_get_rate(clk->parent) / round;
-	divisor--;
-
-	local_irq_save(flags);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
-		tcfg0 |= divisor;
-	}
-
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_timer_scaler[] = {
-	[0]	= {
-		.name		= "pwm-scaler0",
-		.id		= -1,
-		.get_rate	= clk_pwm_scaler_get_rate,
-		.set_rate	= clk_pwm_scaler_set_rate,
-		.round_rate	= clk_pwm_scaler_round_rate,
-	},
-	[1]	= {
-		.name		= "pwm-scaler1",
-		.id		= -1,
-		.get_rate	= clk_pwm_scaler_get_rate,
-		.set_rate	= clk_pwm_scaler_set_rate,
-		.round_rate	= clk_pwm_scaler_round_rate,
-	},
-};
-
-static struct clk clk_timer_tclk[] = {
-	[0]	= {
-		.name		= "pwm-tclk0",
-		.id		= -1,
-	},
-	[1]	= {
-		.name		= "pwm-tclk1",
-		.id		= -1,
-	},
-};
-
-struct pwm_tdiv_clk {
-	struct clk	clk;
-	unsigned int	divisor;
-};
-
-static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
-{
-	return container_of(clk, struct pwm_tdiv_clk, clk);
-}
-
-static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		divisor = to_tdiv(clk)->divisor;
-	else
-		divisor = tcfg_to_divisor(tcfg1);
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	unsigned long parent_rate;
-	unsigned long divisor;
-
-	parent_rate = clk_get_rate(clk->parent);
-	divisor = parent_rate / rate;
-
-	if (divisor <= 1 && pwm_tdiv_has_div1())
-		divisor = 1;
-	else if (divisor <= 2)
-		divisor = 2;
-	else if (divisor <= 4)
-		divisor = 4;
-	else if (divisor <= 8)
-		divisor = 8;
-	else
-		divisor = 16;
-
-	return parent_rate / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
-{
-	return pwm_tdiv_div_bits(divclk->divisor);
-}
-
-static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long bits = clk_pwm_tdiv_bits(divclk);
-	unsigned long flags;
-	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	tcfg1 |= bits << shift;
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-}
-
-static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	rate = clk_round_rate(clk, rate);
-	divisor = parent_rate / rate;
-
-	if (divisor > 16)
-		return -EINVAL;
-
-	divclk->divisor = divisor;
-
-	/* Update the current MUX settings if we are currently
-	 * selected as the clock source for this clock. */
-
-	if (!pwm_cfg_src_is_tclk(tcfg1))
-		clk_pwm_tdiv_update(divclk);
-
-	return 0;
-}
-
-static struct pwm_tdiv_clk clk_timer_tdiv[] = {
-	[0]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[0],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		},
-	},
-	[1]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[0],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		}
-	},
-	[2]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		},
-	},
-	[3]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		},
-	},
-	[4]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		},
-	},
-};
-
-static int __init clk_pwm_tdiv_register(unsigned int id)
-{
-	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	divclk->clk.id = id;
-	divclk->divisor = tcfg_to_divisor(tcfg1);
-
-	return s3c24xx_register_clock(&divclk->clk);
-}
-
-static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
-{
-	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
-}
-
-static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
-{
-	return &clk_timer_tdiv[id].clk;
-}
-
-static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned int id = clk->id;
-	unsigned long tcfg1;
-	unsigned long flags;
-	unsigned long bits;
-	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
-
-	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = S3C_TCFG1_MUX_TCLK << shift;
-	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_tin[] = {
-	[0]	= {
-		.name		= "pwm-tin",
-		.id		= 0,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-	[1]	= {
-		.name		= "pwm-tin",
-		.id		= 1,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-	[2]	= {
-		.name		= "pwm-tin",
-		.id		= 2,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-	[3]	= {
-		.name		= "pwm-tin",
-		.id		= 3,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-	[4]	= {
-		.name		= "pwm-tin",
-		.id		= 4,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-};
-
-static __init int clk_pwm_tin_register(struct clk *pwm)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int id = pwm->id;
-
-	struct clk *parent;
-	int ret;
-
-	ret = s3c24xx_register_clock(pwm);
-	if (ret < 0)
-		return ret;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		parent = s3c24xx_pwmclk_tclk(id);
-	else
-		parent = s3c24xx_pwmclk_tdiv(id);
-
-	return clk_set_parent(pwm, parent);
-}
-
-/**
- * s3c_pwmclk_init() - initialise pwm clocks
- *
- * Initialise and register the clocks which provide the inputs for the
- * pwm timer blocks.
- *
- * Note, this call is required by the time core, so must be called after
- * the base clocks are added and before any of the initcalls are run.
- */
-__init void s3c_pwmclk_init(void)
-{
-	struct clk *clk_timers;
-	unsigned int clk;
-	int ret;
-
-	clk_timers = clk_get(NULL, "timers");
-	if (IS_ERR(clk_timers)) {
-		printk(KERN_ERR "%s: no parent clock\n", __func__);
-		return;
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
-		clk_timer_scaler[clk].parent = clk_timers;
-		ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
-		ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pww tclk%d\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
-		ret = clk_pwm_tdiv_register(clk);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
-		ret = clk_pwm_tin_register(&clk_tin[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
-			return;
-		}
-	}
-}
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
deleted file mode 100644
index ef019f27b67..00000000000
--- a/arch/arm/plat-s3c/pwm.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/* arch/arm/plat-s3c/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C series PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-
-struct pwm_device {
-	struct list_head	 list;
-	struct platform_device	*pdev;
-
-	struct clk		*clk_div;
-	struct clk		*clk;
-	const char		*label;
-
-	unsigned int		 period_ns;
-	unsigned int		 duty_ns;
-
-	unsigned char		 tcon_base;
-	unsigned char		 running;
-	unsigned char		 use_count;
-	unsigned char		 pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-/* Standard setup for a timer block. */
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/* since we already have an static mapping for the timer, we do not
- * bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
-	return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, list) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count = 1;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
-	mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon &= ~pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
-	unsigned long tin_parent_rate;
-	unsigned int div;
-
-	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
-	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
-	for (div = 2; div <= 16; div *= 2) {
-		if ((tin_parent_rate / (div << 16)) < freq)
-			return tin_parent_rate / div;
-	}
-
-	return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long tin_rate;
-	unsigned long tin_ns;
-	unsigned long period;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned long tcnt;
-	long tcmp;
-
-	/* We currently avoid using 64bit arithmetic by using the
-	 * fact that anything faster than 1Hz is easily representable
-	 * by 32bits. */
-
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
-		return -ERANGE;
-
-	if (duty_ns > period_ns)
-		return -EINVAL;
-
-	if (period_ns == pwm->period_ns &&
-	    duty_ns == pwm->duty_ns)
-		return 0;
-
-	/* The TCMP and TCNT can be read without a lock, they're not
-	 * shared between the timers. */
-
-	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
-	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
-	period = NS_IN_HZ / period_ns;
-
-	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
-		duty_ns, period_ns, period);
-
-	/* Check to see if we are changing the clock rate of the PWM */
-
-	if (pwm->period_ns != period_ns) {
-		if (pwm_is_tdiv(pwm)) {
-			tin_rate = pwm_calc_tin(pwm, period);
-			clk_set_rate(pwm->clk_div, tin_rate);
-		} else
-			tin_rate = clk_get_rate(pwm->clk);
-
-		pwm->period_ns = period_ns;
-
-		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
-		tin_ns = NS_IN_HZ / tin_rate;
-		tcnt = period_ns / tin_ns;
-	} else
-		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
-	/* Note, counters count down */
-
-	tcmp = duty_ns / tin_ns;
-	tcmp = tcnt - tcmp;
-	/* the pwm hw only checks the compare register after a decrement,
-	   so the pin never toggles if tcmp = tcnt */
-	if (tcmp == tcnt)
-		tcmp--;
-
-	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
-	if (tcmp < 0)
-		tcmp = 0;
-
-	/* Update the PWM register block. */
-
-	local_irq_save(flags);
-
-	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
-	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_manulupdate(pwm);
-	tcon |= pwm_tcon_autoreload(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	tcon &= ~pwm_tcon_manulupdate(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
-	pwm->duty_ns = -1;
-	pwm->period_ns = -1;
-
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->list, &pwm_list);
-	mutex_unlock(&pwm_lock);
-
-	return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct pwm_device *pwm;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned int id = pdev->id;
-	int ret;
-
-	if (id == 4) {
-		dev_err(dev, "TIMER4 is currently not supported\n");
-		return -ENXIO;
-	}
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(dev, "failed to allocate pwm_device\n");
-		return -ENOMEM;
-	}
-
-	pwm->pdev = pdev;
-	pwm->pwm_id = id;
-
-	/* calculate base of control bits in TCON */
-	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
-	pwm->clk = clk_get(dev, "pwm-tin");
-	if (IS_ERR(pwm->clk)) {
-		dev_err(dev, "failed to get pwm tin clk\n");
-		ret = PTR_ERR(pwm->clk);
-		goto err_alloc;
-	}
-
-	pwm->clk_div = clk_get(dev, "pwm-tdiv");
-	if (IS_ERR(pwm->clk_div)) {
-		dev_err(dev, "failed to get pwm tdiv clk\n");
-		ret = PTR_ERR(pwm->clk_div);
-		goto err_clk_tin;
-	}
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-
-	ret = pwm_register(pwm);
-	if (ret) {
-		dev_err(dev, "failed to register pwm\n");
-		goto err_clk_tdiv;
-	}
-
-	pwm_dbg(pwm, "config bits %02x\n",
-		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
-	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
-		 clk_get_rate(pwm->clk),
-		 clk_get_rate(pwm->clk_div),
-		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
- err_clk_tdiv:
-	clk_put(pwm->clk_div);
-
- err_clk_tin:
-	clk_put(pwm->clk);
-
- err_alloc:
-	kfree(pwm);
-	return ret;
-}
-
-static int __devexit s3c_pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	clk_put(pwm->clk_div);
-	clk_put(pwm->clk);
-	kfree(pwm);
-
-	return 0;
-}
-
-static struct platform_driver s3c_pwm_driver = {
-	.driver		= {
-		.name	= "s3c24xx-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c_pwm_probe,
-	.remove		= __devexit_p(s3c_pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
-	int ret;
-
-	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
-	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
-	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
-		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = platform_driver_register(&s3c_pwm_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
-	return ret;
-}
-
-arch_initcall(pwm_init);