aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorAndrew Victor <andrew@sanpeople.com>2006-06-19 15:26:54 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-06-19 15:26:54 +0100
commit814138ffa488824393d2f49f2720dcd197a7d4cf (patch)
tree24e86542da43b8e797859a0b085b03a9a3cb5091 /arch/arm
parent683c66bf75ce277b90d658da0c1a0bf1a55cce4c (diff)
[ARM] 3584/1: AT91RM9200 GPIO suspend/resume support
Patch from Andrew Victor This patch adds suspend/resume/set_wake support for the AT91RM9200's GPIO interrupts. Original patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-at91rm9200/gpio.c87
1 files changed, 84 insertions, 3 deletions
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 5ab46274e1a..3430ea05466 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -213,6 +213,84 @@ EXPORT_SYMBOL(at91_get_gpio_value);
/*--------------------------------------------------------------------------*/
+#ifdef CONFIG_PM
+
+static u32 wakeups[BGA_GPIO_BANKS];
+static u32 backups[BGA_GPIO_BANKS];
+
+static int gpio_irq_set_wake(unsigned pin, unsigned state)
+{
+ unsigned mask = pin_to_mask(pin);
+
+ pin -= PIN_BASE;
+ pin /= 32;
+
+ if (unlikely(pin >= BGA_GPIO_BANKS))
+ return -EINVAL;
+
+ if (state)
+ wakeups[pin] |= mask;
+ else
+ wakeups[pin] &= ~mask;
+
+ return 0;
+}
+
+void at91_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < BGA_GPIO_BANKS; i++) {
+ u32 pio = pio_controller_offset[i];
+
+ /*
+ * Note: drivers should have disabled GPIO interrupts that
+ * aren't supposed to be wakeup sources.
+ * But that is not much good on ARM..... disable_irq() does
+ * not update the hardware immediately, so the hardware mask
+ * (IMR) has the wrong value (not current, too much is
+ * permitted).
+ *
+ * Our workaround is to disable all non-wakeup IRQs ...
+ * which is exactly what correct drivers asked for in the
+ * first place!
+ */
+ backups[i] = at91_sys_read(pio + PIO_IMR);
+ at91_sys_write(pio_controller_offset[i] + PIO_IDR, backups[i]);
+ at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]);
+
+ if (!wakeups[i]) {
+ disable_irq_wake(AT91_ID_PIOA + i);
+ at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i));
+ } else {
+ enable_irq_wake(AT91_ID_PIOA + i);
+#ifdef CONFIG_PM_DEBUG
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
+#endif
+ }
+ }
+}
+
+void at91_gpio_resume(void)
+{
+ int i;
+
+ for (i = 0; i < BGA_GPIO_BANKS; i++) {
+ at91_sys_write(pio_controller_offset[i] + PIO_IDR, wakeups[i]);
+ at91_sys_write(pio_controller_offset[i] + PIO_IER, backups[i]);
+ }
+
+ at91_sys_write(AT91_PMC_PCER,
+ (1 << AT91_ID_PIOA)
+ | (1 << AT91_ID_PIOB)
+ | (1 << AT91_ID_PIOC)
+ | (1 << AT91_ID_PIOD));
+}
+
+#else
+#define gpio_irq_set_wake NULL
+#endif
+
/* Several AIC controller irqs are dispatched through this GPIO handler.
* To use any AT91_PIN_* as an externally triggered IRQ, first call
@@ -252,6 +330,7 @@ static struct irqchip gpio_irqchip = {
.mask = gpio_irq_mask,
.unmask = gpio_irq_unmask,
.set_type = gpio_irq_type,
+ .set_wake = gpio_irq_set_wake,
};
static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs *regs)
@@ -266,6 +345,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
for (;;) {
+ /* reading ISR acks the pending (edge triggered) GPIO interrupt */
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
if (!isr)
break;
@@ -315,15 +395,16 @@ void __init at91_gpio_irq_setup(unsigned banks)
set_irq_chipdata(id, controller);
for (i = 0; i < 32; i++, pin++) {
+ /*
+ * Can use the "simple" and not "edge" handler since it's
+ * shorter, and the AIC handles interupts sanely.
+ */
set_irq_chip(pin, &gpio_irqchip);
set_irq_handler(pin, do_simple_IRQ);
set_irq_flags(pin, IRQF_VALID);
}
set_irq_chained_handler(id, gpio_irq_handler);
-
- /* enable the PIO peripheral clock */
- at91_sys_write(AT91_PMC_PCER, 1 << id);
}
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks);
}