aboutsummaryrefslogtreecommitdiff
path: root/arch/i386/Kconfig
diff options
context:
space:
mode:
authorSam Ravnborg <sam@ravnborg.org>2007-10-25 21:04:16 +0200
committerSam Ravnborg <sam@ravnborg.org>2007-10-25 22:37:02 +0200
commit47572387d58a9584c60ebbbdee56fc92c627f16f (patch)
tree04ac61fdc84b080dac72c30a06cee449b6c3e847 /arch/i386/Kconfig
parente703f75d620824739148142c3734ae8223e4d1f5 (diff)
x86: move i386 and x86_64 Kconfig files to x86 directory
After a small change in kconfig Makefile we could move all x86 Kconfig files to x86 directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Diffstat (limited to 'arch/i386/Kconfig')
-rw-r--r--arch/i386/Kconfig1321
1 files changed, 0 insertions, 1321 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
deleted file mode 100644
index d24e3e207ea..00000000000
--- a/arch/i386/Kconfig
+++ /dev/null
@@ -1,1321 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux Kernel Configuration"
-
-config X86_32
- bool
- default y
- help
- This is Linux's home port. Linux was originally native to the Intel
- 386, and runs on all the later x86 processors including the Intel
- 486, 586, Pentiums, and various instruction-set-compatible chips by
- AMD, Cyrix, and others.
-
-config GENERIC_TIME
- bool
- default y
-
-config GENERIC_CMOS_UPDATE
- bool
- default y
-
-config CLOCKSOURCE_WATCHDOG
- bool
- default y
-
-config GENERIC_CLOCKEVENTS
- bool
- default y
-
-config GENERIC_CLOCKEVENTS_BROADCAST
- bool
- default y
- depends on X86_LOCAL_APIC
-
-config LOCKDEP_SUPPORT
- bool
- default y
-
-config STACKTRACE_SUPPORT
- bool
- default y
-
-config SEMAPHORE_SLEEPERS
- bool
- default y
-
-config X86
- bool
- default y
-
-config MMU
- bool
- default y
-
-config ZONE_DMA
- bool
- default y
-
-config QUICKLIST
- bool
- default y
-
-config SBUS
- bool
-
-config GENERIC_ISA_DMA
- bool
- default y
-
-config GENERIC_IOMAP
- bool
- default y
-
-config GENERIC_BUG
- bool
- default y
- depends on BUG
-
-config GENERIC_HWEIGHT
- bool
- default y
-
-config ARCH_MAY_HAVE_PC_FDC
- bool
- default y
-
-config DMI
- bool
- default y
-
-source "init/Kconfig"
-
-menu "Processor type and features"
-
-source "kernel/time/Kconfig"
-
-config SMP
- bool "Symmetric multi-processing support"
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
- you have a system with more than one CPU, say Y.
-
- If you say N here, the kernel will run on single and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- singleprocessor machines. On a singleprocessor machine, the kernel
- will run faster if you say N here.
-
- Note that if you say Y here and choose architecture "586" or
- "Pentium" under "Processor family", the kernel will not work on 486
- architectures. Similarly, multiprocessor kernels for the "PPro"
- architecture may not work on all Pentium based boards.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
- Management" code will be disabled if you say Y here.
-
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/i386/IO-APIC.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
-
-choice
- prompt "Subarchitecture Type"
- default X86_PC
-
-config X86_PC
- bool "PC-compatible"
- help
- Choose this option if your computer is a standard PC or compatible.
-
-config X86_ELAN
- bool "AMD Elan"
- help
- Select this for an AMD Elan processor.
-
- Do not use this option for K6/Athlon/Opteron processors!
-
- If unsure, choose "PC-compatible" instead.
-
-config X86_VOYAGER
- bool "Voyager (NCR)"
- select SMP if !BROKEN
- help
- Voyager is an MCA-based 32-way capable SMP architecture proprietary
- to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
-
- *** WARNING ***
-
- If you do not specifically know you have a Voyager based machine,
- say N here, otherwise the kernel you build will not be bootable.
-
-config X86_NUMAQ
- bool "NUMAQ (IBM/Sequent)"
- select SMP
- select NUMA
- help
- This option is used for getting Linux to run on a (IBM/Sequent) NUMA
- multiquad box. This changes the way that processors are bootstrapped,
- and uses Clustered Logical APIC addressing mode instead of Flat Logical.
- You will need a new lynxer.elf file to flash your firmware with - send
- email to <Martin.Bligh@us.ibm.com>.
-
-config X86_SUMMIT
- bool "Summit/EXA (IBM x440)"
- depends on SMP
- help
- This option is needed for IBM systems that use the Summit/EXA chipset.
- In particular, it is needed for the x440.
-
- If you don't have one of these computers, you should say N here.
- If you want to build a NUMA kernel, you must select ACPI.
-
-config X86_BIGSMP
- bool "Support for other sub-arch SMP systems with more than 8 CPUs"
- depends on SMP
- help
- This option is needed for the systems that have more than 8 CPUs
- and if the system is not of any sub-arch type above.
-
- If you don't have such a system, you should say N here.
-
-config X86_VISWS
- bool "SGI 320/540 (Visual Workstation)"
- help
- The SGI Visual Workstation series is an IA32-based workstation
- based on SGI systems chips with some legacy PC hardware attached.
-
- Say Y here to create a kernel to run on the SGI 320 or 540.
-
- A kernel compiled for the Visual Workstation will not run on PCs
- and vice versa. See <file:Documentation/sgi-visws.txt> for details.
-
-config X86_GENERICARCH
- bool "Generic architecture (Summit, bigsmp, ES7000, default)"
- help
- This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
- It is intended for a generic binary kernel.
- If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
-
-config X86_ES7000
- bool "Support for Unisys ES7000 IA32 series"
- depends on SMP
- help
- Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
- supposed to run on an IA32-based Unisys ES7000 system.
- Only choose this option if you have such a system, otherwise you
- should say N here.
-
-endchoice
-
-config SCHED_NO_NO_OMIT_FRAME_POINTER
- bool "Single-depth WCHAN output"
- default y
- help
- Calculate simpler /proc/<PID>/wchan values. If this option
- is disabled then wchan values will recurse back to the
- caller function. This provides more accurate wchan values,
- at the expense of slightly more scheduling overhead.
-
- If in doubt, say "Y".
-
-config PARAVIRT
- bool
- depends on !(X86_VISWS || X86_VOYAGER)
- help
- This changes the kernel so it can modify itself when it is run
- under a hypervisor, potentially improving performance significantly
- over full virtualization. However, when run without a hypervisor
- the kernel is theoretically slower and slightly larger.
-
-menuconfig PARAVIRT_GUEST
- bool "Paravirtualized guest support"
- help
- Say Y here to get to see options related to running Linux under
- various hypervisors. This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if PARAVIRT_GUEST
-
-source "arch/x86/xen/Kconfig"
-
-config VMI
- bool "VMI Guest support"
- select PARAVIRT
- depends on !(X86_VISWS || X86_VOYAGER)
- help
- VMI provides a paravirtualized interface to the VMware ESX server
- (it could be used by other hypervisors in theory too, but is not
- at the moment), by linking the kernel to a GPL-ed ROM module
- provided by the hypervisor.
-
-source "arch/x86/lguest/Kconfig"
-
-endif
-
-config ACPI_SRAT
- bool
- default y
- depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
- select ACPI_NUMA
-
-config HAVE_ARCH_PARSE_SRAT
- bool
- default y
- depends on ACPI_SRAT
-
-config X86_SUMMIT_NUMA
- bool
- default y
- depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
-
-config X86_CYCLONE_TIMER
- bool
- default y
- depends on X86_SUMMIT || X86_GENERICARCH
-
-config ES7000_CLUSTERED_APIC
- bool
- default y
- depends on SMP && X86_ES7000 && MPENTIUMIII
-
-source "arch/i386/Kconfig.cpu"
-
-config HPET_TIMER
- bool "HPET Timer Support"
- help
- This enables the use of the HPET for the kernel's internal timer.
- HPET is the next generation timer replacing legacy 8254s.
- You can safely choose Y here. However, HPET will only be
- activated if the platform and the BIOS support this feature.
- Otherwise the 8254 will be used for timing services.
-
- Choose N to continue using the legacy 8254 timer.
-
-config HPET_EMULATE_RTC
- bool
- depends on HPET_TIMER && RTC=y
- default y
-
-config NR_CPUS
- int "Maximum number of CPUs (2-255)"
- range 2 255
- depends on SMP
- default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
- default "8"
- help
- This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 255 and the
- minimum value which makes sense is 2.
-
- This is purely to save memory - each supported CPU adds
- approximately eight kilobytes to the kernel image.
-
-config SCHED_SMT
- bool "SMT (Hyperthreading) scheduler support"
- depends on X86_HT
- help
- SMT scheduler support improves the CPU scheduler's decision making
- when dealing with Intel Pentium 4 chips with HyperThreading at a
- cost of slightly increased overhead in some places. If unsure say
- N here.
-
-config SCHED_MC
- bool "Multi-core scheduler support"
- depends on X86_HT
- default y
- help
- Multi-core scheduler support improves the CPU scheduler's decision
- making when dealing with multi-core CPU chips at a cost of slightly
- increased overhead in some places. If unsure say N here.
-
-source "kernel/Kconfig.preempt"
-
-config X86_UP_APIC
- bool "Local APIC support on uniprocessors"
- depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
- help
- A local APIC (Advanced Programmable Interrupt Controller) is an
- integrated interrupt controller in the CPU. If you have a single-CPU
- system which has a processor with a local APIC, you can say Y here to
- enable and use it. If you say Y here even though your machine doesn't
- have a local APIC, then the kernel will still run with no slowdown at
- all. The local APIC supports CPU-generated self-interrupts (timer,
- performance counters), and the NMI watchdog which detects hard
- lockups.
-
-config X86_UP_IOAPIC
- bool "IO-APIC support on uniprocessors"
- depends on X86_UP_APIC
- help
- An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
- SMP-capable replacement for PC-style interrupt controllers. Most
- SMP systems and many recent uniprocessor systems have one.
-
- If you have a single-CPU system with an IO-APIC, you can say Y here
- to use it. If you say Y here even though your machine doesn't have
- an IO-APIC, then the kernel will still run with no slowdown at all.
-
-config X86_LOCAL_APIC
- bool
- depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH
- default y
-
-config X86_IO_APIC
- bool
- depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH
- default y
-
-config X86_VISWS_APIC
- bool
- depends on X86_VISWS
- default y
-
-config X86_MCE
- bool "Machine Check Exception"
- depends on !X86_VOYAGER
- ---help---
- Machine Check Exception support allows the processor to notify the
- kernel if it detects a problem (e.g. overheating, component failure).
- The action the kernel takes depends on the severity of the problem,
- ranging from a warning message on the console, to halting the machine.
- Your processor must be a Pentium or newer to support this - check the
- flags in /proc/cpuinfo for mce. Note that some older Pentium systems
- have a design flaw which leads to false MCE events - hence MCE is
- disabled on all P5 processors, unless explicitly enabled with "mce"
- as a boot argument. Similarly, if MCE is built in and creates a
- problem on some new non-standard machine, you can boot with "nomce"
- to disable it. MCE support simply ignores non-MCE processors like
- the 386 and 486, so nearly everyone can say Y here.
-
-config X86_MCE_NONFATAL
- tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
- depends on X86_MCE
- help
- Enabling this feature starts a timer that triggers every 5 seconds which
- will look at the machine check registers to see if anything happened.
- Non-fatal problems automatically get corrected (but still logged).
- Disable this if you don't want to see these messages.
- Seeing the messages this option prints out may be indicative of dying
- or out-of-spec (ie, overclocked) hardware.
- This option only does something on certain CPUs.
- (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
- bool "check for P4 thermal throttling interrupt."
- depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
- help
- Enabling this feature will cause a message to be printed when the P4
- enters thermal throttling.
-
-config VM86
- default y
- bool "Enable VM86 support" if EMBEDDED
- help
- This option is required by programs like DOSEMU to run 16-bit legacy
- code on X86 processors. It also may be needed by software like
- XFree86 to initialize some video cards via BIOS. Disabling this
- option saves about 6k.
-
-config TOSHIBA
- tristate "Toshiba Laptop support"
- ---help---
- This adds a driver to safely access the System Management Mode of
- the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
- not work on models with a Phoenix BIOS. The System Management Mode
- is used to set the BIOS and power saving options on Toshiba portables.
-
- For information on utilities to make use of this driver see the
- Toshiba Linux utilities web site at:
- <http://www.buzzard.org.uk/toshiba/>.
-
- Say Y if you intend to run this kernel on a Toshiba portable.
- Say N otherwise.
-
-config I8K
- tristate "Dell laptop support"
- ---help---
- This adds a driver to safely access the System Management Mode
- of the CPU on the Dell Inspiron 8000. The System Management Mode
- is used to read cpu temperature and cooling fan status and to
- control the fans on the I8K portables.
-
- This driver has been tested only on the Inspiron 8000 but it may
- also work with other Dell laptops. You can force loading on other
- models by passing the parameter `force=1' to the module. Use at
- your own risk.
-
- For information on utilities to make use of this driver see the
- I8K Linux utilities web site at:
- <http://people.debian.org/~dz/i8k/>
-
- Say Y if you intend to run this kernel on a Dell Inspiron 8000.
- Say N otherwise.
-
-config X86_REBOOTFIXUPS
- bool "Enable X86 board specific fixups for reboot"
- depends on X86
- default n
- ---help---
- This enables chipset and/or board specific fixups to be done
- in order to get reboot to work correctly. This is only needed on
- some combinations of hardware and BIOS. The symptom, for which
- this config is intended, is when reboot ends with a stalled/hung
- system.
-
- Currently, the only fixup is for the Geode machines using
- CS5530A and CS5536 chipsets.
-
- Say Y if you want to enable the fixup. Currently, it's safe to
- enable this option even if you don't need it.
- Say N otherwise.
-
-config MICROCODE
- tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
- select FW_LOADER
- ---help---
- If you say Y here, you will be able to update the microcode on
- Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
- Pentium III, Pentium 4, Xeon etc. You will obviously need the
- actual microcode binary data itself which is not shipped with the
- Linux kernel.
-
- For latest news and information on obtaining all the required
- ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
-
- To compile this driver as a module, choose M here: the
- module will be called microcode.
-
-config MICROCODE_OLD_INTERFACE
- bool
- depends on MICROCODE
- default y
-
-config X86_MSR
- tristate "/dev/cpu/*/msr - Model-specific register support"
- help
- This device gives privileged processes access to the x86
- Model-Specific Registers (MSRs). It is a character device with
- major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
- MSR accesses are directed to a specific CPU on multi-processor
- systems.
-
-config X86_CPUID
- tristate "/dev/cpu/*/cpuid - CPU information support"
- help
- This device gives processes access to the x86 CPUID instruction to
- be executed on a specific processor. It is a character device
- with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
- /dev/cpu/31/cpuid.
-
-source "drivers/firmware/Kconfig"
-
-choice
- prompt "High Memory Support"
- default HIGHMEM4G if !X86_NUMAQ
- default HIGHMEM64G if X86_NUMAQ
-
-config NOHIGHMEM
- bool "off"
- depends on !X86_NUMAQ
- ---help---
- Linux can use up to 64 Gigabytes of physical memory on x86 systems.
- However, the address space of 32-bit x86 processors is only 4
- Gigabytes large. That means that, if you have a large amount of
- physical memory, not all of it can be "permanently mapped" by the
- kernel. The physical memory that's not permanently mapped is called
- "high memory".
-
- If you are compiling a kernel which will never run on a machine with
- more than 1 Gigabyte total physical RAM, answer "off" here (default
- choice and suitable for most users). This will result in a "3GB/1GB"
- split: 3GB are mapped so that each process sees a 3GB virtual memory
- space and the remaining part of the 4GB virtual memory space is used
- by the kernel to permanently map as much physical memory as
- possible.
-
- If the machine has between 1 and 4 Gigabytes physical RAM, then
- answer "4GB" here.
-
- If more than 4 Gigabytes is used then answer "64GB" here. This
- selection turns Intel PAE (Physical Address Extension) mode on.
- PAE implements 3-level paging on IA32 processors. PAE is fully
- supported by Linux, PAE mode is implemented on all recent Intel
- processors (Pentium Pro and better). NOTE: If you say "64GB" here,
- then the kernel will not boot on CPUs that don't support PAE!
-
- The actual amount of total physical memory will either be
- auto detected or can be forced by using a kernel command line option
- such as "mem=256M". (Try "man bootparam" or see the documentation of
- your boot loader (lilo or loadlin) about how to pass options to the
- kernel at boot time.)
-
- If unsure, say "off".
-
-config HIGHMEM4G
- bool "4GB"
- depends on !X86_NUMAQ
- help
- Select this if you have a 32-bit processor and between 1 and 4
- gigabytes of physical RAM.
-
-config HIGHMEM64G
- bool "64GB"
- depends on !M386 && !M486
- select X86_PAE
- help
- Select this if you have a 32-bit processor and more than 4
- gigabytes of physical RAM.
-
-endchoice
-
-choice
- depends on EXPERIMENTAL
- prompt "Memory split" if EMBEDDED
- default VMSPLIT_3G
- help
- Select the desired split between kernel and user memory.
-
- If the address range available to the kernel is less than the
- physical memory installed, the remaining memory will be available
- as "high memory". Accessing high memory is a little more costly
- than low memory, as it needs to be mapped into the kernel first.
- Note that increasing the kernel address space limits the range
- available to user programs, making the address space there
- tighter. Selecting anything other than the default 3G/1G split
- will also likely make your kernel incompatible with binary-only
- kernel modules.
-
- If you are not absolutely sure what you are doing, leave this
- option alone!
-
- config VMSPLIT_3G
- bool "3G/1G user/kernel split"
- config VMSPLIT_3G_OPT
- depends on !X86_PAE
- bool "3G/1G user/kernel split (for full 1G low memory)"
- config VMSPLIT_2G
- bool "2G/2G user/kernel split"
- config VMSPLIT_2G_OPT
- depends on !X86_PAE
- bool "2G/2G user/kernel split (for full 2G low memory)"
- config VMSPLIT_1G
- bool "1G/3G user/kernel split"
-endchoice
-
-config PAGE_OFFSET
- hex
- default 0xB0000000 if VMSPLIT_3G_OPT
- default 0x80000000 if VMSPLIT_2G
- default 0x78000000 if VMSPLIT_2G_OPT
- default 0x40000000 if VMSPLIT_1G
- default 0xC0000000
-
-config HIGHMEM
- bool
- depends on HIGHMEM64G || HIGHMEM4G
- default y
-
-config X86_PAE
- bool "PAE (Physical Address Extension) Support"
- default n
- depends on !HIGHMEM4G
- select RESOURCES_64BIT
- help
- PAE is required for NX support, and furthermore enables
- larger swapspace support for non-overcommit purposes. It
- has the cost of more pagetable lookup overhead, and also
- consumes more pagetable space per process.
-
-# Common NUMA Features
-config NUMA
- bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
- depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL
- default n if X86_PC
- default y if (X86_NUMAQ || X86_SUMMIT)
- help
- NUMA support for i386. This is currently highly experimental
- and should be only used for kernel development. It might also
- cause boot failures.
-
-comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
- depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
-
-config NODES_SHIFT
- int
- default "4" if X86_NUMAQ
- default "3"
- depends on NEED_MULTIPLE_NODES
-
-config HAVE_ARCH_BOOTMEM_NODE
- bool
- depends on NUMA
- default y
-
-config ARCH_HAVE_MEMORY_PRESENT
- bool
- depends on DISCONTIGMEM
- default y
-
-config NEED_NODE_MEMMAP_SIZE
- bool
- depends on DISCONTIGMEM || SPARSEMEM
- default y
-
-config HAVE_ARCH_ALLOC_REMAP
- bool
- depends on NUMA
- default y
-
-config ARCH_FLATMEM_ENABLE
- def_bool y
- depends on (ARCH_SELECT_MEMORY_MODEL && X86_PC)
-
-config ARCH_DISCONTIGMEM_ENABLE
- def_bool y
- depends on NUMA
-
-config ARCH_DISCONTIGMEM_DEFAULT
- def_bool y
- depends on NUMA
-
-config ARCH_SPARSEMEM_ENABLE
- def_bool y
- depends on (NUMA || (X86_PC && EXPERIMENTAL))
- select SPARSEMEM_STATIC
-
-config ARCH_SELECT_MEMORY_MODEL
- def_bool y
- depends on ARCH_SPARSEMEM_ENABLE
-
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
-source "mm/Kconfig"
-
-config HIGHPTE
- bool "Allocate 3rd-level pagetables from highmem"
- depends on HIGHMEM4G || HIGHMEM64G
- help
- The VM uses one page table entry for each page of physical memory.
- For systems with a lot of RAM, this can be wasteful of precious
- low memory. Setting this option will put user-space page table
- entries in high memory.
-
-config MATH_EMULATION
- bool "Math emulation"
- ---help---
- Linux can emulate a math coprocessor (used for floating point
- operations) if you don't have one. 486DX and Pentium processors have
- a math coprocessor built in, 486SX and 386 do not, unless you added
- a 487DX or 387, respectively. (The messages during boot time can
- give you some hints here ["man dmesg"].) Everyone needs either a
- coprocessor or this emulation.
-
- If you don't have a math coprocessor, you need to say Y here; if you
- say Y here even though you have a coprocessor, the coprocessor will
- be used nevertheless. (This behavior can be changed with the kernel
- command line option "no387", which comes handy if your coprocessor
- is broken. Try "man bootparam" or see the documentation of your boot
- loader (lilo or loadlin) about how to pass options to the kernel at
- boot time.) This means that it is a good idea to say Y here if you
- intend to use this kernel on different machines.
-
- More information about the internals of the Linux math coprocessor
- emulation can be found in <file:arch/x86/math-emu/README>.
-
- If you are not sure, say Y; apart from resulting in a 66 KB bigger
- kernel, it won't hurt.
-
-config MTRR
- bool "MTRR (Memory Type Range Register) support"
- ---help---
- On Intel P6 family processors (Pentium Pro, Pentium II and later)
- the Memory Type Range Registers (MTRRs) may be used to control
- processor access to memory ranges. This is most useful if you have
- a video (VGA) card on a PCI or AGP bus. Enabling write-combining
- allows bus write transfers to be combined into a larger transfer
- before bursting over the PCI/AGP bus. This can increase performance
- of image write operations 2.5 times or more. Saying Y here creates a
- /proc/mtrr file which may be used to manipulate your processor's
- MTRRs. Typically the X server should use this.
-
- This code has a reasonably generic interface so that similar
- control registers on other processors can be easily supported
- as well:
-
- The Cyrix 6x86, 6x86MX and M II processors have Address Range
- Registers (ARRs) which provide a similar functionality to MTRRs. For
- these, the ARRs are used to emulate the MTRRs.
- The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
- MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
- write-combining. All of these processors are supported by this code
- and it makes sense to say Y here if you have one of them.
-
- Saying Y here also fixes a problem with buggy SMP BIOSes which only
- set the MTRRs for the boot CPU and not for the secondary CPUs. This
- can lead to all sorts of problems, so it's good to say Y here.
-
- You can safely say Y even if your machine doesn't have MTRRs, you'll
- just add about 9 KB to your kernel.
-
- See <file:Documentation/mtrr.txt> for more information.
-
-config EFI
- bool "Boot from EFI support"
- depends on ACPI
- default n
- ---help---
- This enables the kernel to boot on EFI platforms using
- system configuration information passed to it from the firmware.
- This also enables the kernel to use any EFI runtime services that are
- available (such as the EFI variable services).
-
- This option is only useful on systems that have EFI firmware
- and will result in a kernel image that is ~8k larger. In addition,
- you must use the latest ELILO loader available at
- <http://elilo.sourceforge.net> in order to take advantage of
- kernel initialization using EFI information (neither GRUB nor LILO know
- anything about EFI). However, even with this option, the resultant
- kernel should continue to boot on existing non-EFI platforms.
-
-config IRQBALANCE
- bool "Enable kernel irq balancing"
- depends on SMP && X86_IO_APIC
- default y
- help
- The default yes will allow the kernel to do irq load balancing.
- Saying no will keep the kernel from doing irq load balancing.
-
-# turning this on wastes a bunch of space.
-# Summit needs it only when NUMA is on
-config BOOT_IOREMAP
- bool
- depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
- default y
-
-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
-source kernel/Kconfig.hz
-
-config KEXEC
- bool "kexec system call"
- help
- kexec is a system call that implements the ability to shutdown your
- current kernel, and to start another kernel. It is like a reboot
- but it is independent of the system firmware. And like a reboot
- you can start any kernel with it, not just Linux.
-
- The name comes from the similarity to the exec system call.
-
- It is an ongoing process to be certain the hardware in a machine
- is properly shutdown, so do not be surprised if this code does not
- initially work for you. It may help to enable device hotplugging
- support. As of this writing the exact hardware interface is
- strongly in flux, so no good recommendation can be made.
-
-config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- depends on HIGHMEM
- help
- Generate crash dump after being started by kexec.
- This should be normally only set in special crash dump kernels
- which are loaded in the main kernel with kexec-tools into
- a specially reserved region and then later executed after
- a crash by kdump/kexec. The crash dump kernel must be compiled
- to a memory address not used by the main kernel or BIOS using
- PHYSICAL_START, or it must be built as a relocatable image
- (CONFIG_RELOCATABLE=y).
- For more details see Documentation/kdump/kdump.txt
-
-config PHYSICAL_START
- hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
- default "0x1000000" if X86_NUMAQ
- default "0x100000"
- help
- This gives the physical address where the kernel is loaded.
-
- If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
- bzImage will decompress itself to above physical address and
- run from there. Otherwise, bzImage will run from the address where
- it has been loaded by the boot loader and will ignore above physical
- address.
-
- In normal kdump cases one does not have to set/change this option
- as now bzImage can be compiled as a completely relocatable image
- (CONFIG_RELOCATABLE=y) and be used to load and run from a different
- address. This option is mainly useful for the folks who don't want
- to use a bzImage for capturing the crash dump and want to use a
- vmlinux instead. vmlinux is not relocatable hence a kernel needs
- to be specifically compiled to run from a specific memory area
- (normally a reserved region) and this option comes handy.
-
- So if you are using bzImage for capturing the crash dump, leave
- the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
- Otherwise if you plan to use vmlinux for capturing the crash dump
- change this value to start of the reserved region (Typically 16MB
- 0x1000000). In other words, it can be set based on the "X" value as
- specified in the "crashkernel=YM@XM" command line boot parameter
- passed to the panic-ed kernel. Typically this parameter is set as
- crashkernel=64M@16M. Please take a look at
- Documentation/kdump/kdump.txt for more details about crash dumps.
-
- Usage of bzImage for capturing the crash dump is recommended as
- one does not have to build two kernels. Same kernel can be used
- as production kernel and capture kernel. Above option should have
- gone away after relocatable bzImage support is introduced. But it
- is present because there are users out there who continue to use
- vmlinux for dump capture. This option should go away down the
- line.
-
- Don't change this unless you know what you are doing.
-
-config RELOCATABLE
- bool "Build a relocatable kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- This builds a kernel image that retains relocation information
- so it can be loaded someplace besides the default 1MB.
- The relocations tend to make the kernel binary about 10% larger,
- but are discarded at runtime.
-
- One use is for the kexec on panic case where the recovery kernel
- must live at a different physical address than the primary
- kernel.
-
-config PHYSICAL_ALIGN
- hex "Alignment value to which kernel should be aligned"
- default "0x100000"
- range 0x2000 0x400000
- help
- This value puts the alignment restrictions on physical address
- where kernel is loaded and run from. Kernel is compiled for an
- address which meets above alignment restriction.
-
- If bootloader loads the kernel at a non-aligned address and
- CONFIG_RELOCATABLE is set, kernel will move itself to nearest
- address aligned to above value and run from there.
-
- If bootloader loads the kernel at a non-aligned address and
- CONFIG_RELOCATABLE is not set, kernel will ignore the run time
- load address and decompress itself to the address it has been
- compiled for and run from there. The address for which kernel is
- compiled already meets above alignment restrictions. Hence the
- end result is that kernel runs from a physical address meeting
- above alignment restrictions.
-
- Don't change this unless you know what you are doing.
-
-config HOTPLUG_CPU
- bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
- ---help---
- Say Y here to experiment with turning CPUs off and on, and to
- enable suspend on SMP systems. CPUs can be controlled through
- /sys/devices/system/cpu.
-
-config COMPAT_VDSO
- bool "Compat VDSO support"
- default y
- help
- Map the VDSO to the predictable old-style address too.
- ---help---
- Say N here if you are running a sufficiently recent glibc
- version (2.3.3 or later), to remove the high-mapped
- VDSO mapping and to exclusively use the randomized VDSO.
-
- If unsure, say Y.
-
-endmenu
-
-config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y
- depends on HIGHMEM
-
-menu "Power management options (ACPI, APM)"
- depends on !X86_VOYAGER
-
-source kernel/power/Kconfig
-
-source "drivers/acpi/Kconfig"
-
-menuconfig APM
- tristate "APM (Advanced Power Management) BIOS support"
- depends on PM_SLEEP && !X86_VISWS
- ---help---
- APM is a BIOS specification for saving power using several different
- techniques. This is mostly useful for battery powered laptops with
- APM compliant BIOSes. If you say Y here, the system time will be
- reset after a RESUME operation, the /proc/apm device will provide
- battery status information, and user-space programs will receive
- notification of APM "events" (e.g. battery status change).
-
- If you select "Y" here, you can disable actual use of the APM
- BIOS by passing the "apm=off" option to the kernel at boot time.
-
- Note that the APM support is almost completely disabled for
- machines with more than one CPU.
-
- In order to use APM, you will need supporting software. For location
- and more information, read <file:Documentation/pm.txt> and the
- Battery Powered Linux mini-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver does not spin down disk drives (see the hdparm(8)
- manpage ("man 8 hdparm") for that), and it doesn't turn off
- VESA-compliant "green" monitors.
-
- This driver does not support the TI 4000M TravelMate and the ACER
- 486/DX4/75 because they don't have compliant BIOSes. Many "green"
- desktop machines also don't have compliant BIOSes, and this driver
- may cause those machines to panic during the boot phase.
-
- Generally, if you don't have a battery in your machine, there isn't
- much point in using this driver and you should say N. If you get
- random kernel OOPSes or reboots that don't seem to be related to
- anything, try disabling/enabling this option (or disabling/enabling
- APM in your BIOS).
-
- Some other things you should try when experiencing seemingly random,
- "weird" problems:
-
- 1) make sure that you have enough swap space and that it is
- enabled.
- 2) pass the "no-hlt" option to the kernel
- 3) switch on floating point emulation in the kernel and pass
- the "no387" option to the kernel
- 4) pass the "floppy=nodma" option to the kernel
- 5) pass the "mem=4M" option to the kernel (thereby disabling
- all but the first 4 MB of RAM)
- 6) make sure that the CPU is not over clocked.
- 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
- 8) disable the cache from your BIOS settings
- 9) install a fan for the video card or exchange video RAM
- 10) install a better fan for the CPU
- 11) exchange RAM chips
- 12) exchange the motherboard.
-
- To compile this driver as a module, choose M here: the
- module will be called apm.
-
-if APM
-
-config APM_IGNORE_USER_SUSPEND
- bool "Ignore USER SUSPEND"
- help
- This option will ignore USER SUSPEND requests. On machines with a
- compliant APM BIOS, you want to say N. However, on the NEC Versa M
- series notebooks, it is necessary to say Y because of a BIOS bug.
-
-config APM_DO_ENABLE
- bool "Enable PM at boot time"
- ---help---
- Enable APM features at boot time. From page 36 of the APM BIOS
- specification: "When disabled, the APM BIOS does not automatically
- power manage devices, enter the Standby State, enter the Suspend
- State, or take power saving steps in response to CPU Idle calls."
- This driver will make CPU Idle calls when Linux is idle (unless this
- feature is turned off -- see "Do CPU IDLE calls", below). This
- should always save battery power, but more complicated APM features
- will be dependent on your BIOS implementation. You may need to turn
- this option off if your computer hangs at boot time when using APM
- support, or if it beeps continuously instead of suspending. Turn
- this off if you have a NEC UltraLite Versa 33/C or a Toshiba
- T400CDT. This is off by default since most machines do fine without
- this feature.
-
-config APM_CPU_IDLE
- bool "Make CPU Idle calls when idle"
- help
- Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
- On some machines, this can activate improved power savings, such as
- a slowed CPU clock rate, when the machine is idle. These idle calls
- are made after the idle loop has run for some length of time (e.g.,
- 333 mS). On some machines, this will cause a hang at boot time or
- whenever the CPU becomes idle. (On machines with more than one CPU,
- this option does nothing.)
-
-config APM_DISPLAY_BLANK
- bool "Enable console blanking using APM"
- help
- Enable console blanking using the APM. Some laptops can use this to
- turn off the LCD backlight when the screen blanker of the Linux
- virtual console blanks the screen. Note that this is only used by
- the virtual console screen blanker, and won't turn off the backlight
- when using the X Window system. This also doesn't have anything to
- do with your VESA-compliant power-saving monitor. Further, this
- option doesn't work for all laptops -- it might not turn off your
- backlight at all, or it might print a lot of errors to the console,
- especially if you are using gpm.
-
-config APM_ALLOW_INTS
- bool "Allow interrupts during APM BIOS calls"
- help
- Normally we disable external interrupts while we are making calls to
- the APM BIOS as a measure to lessen the effects of a badly behaving
- BIOS implementation. The BIOS should reenable interrupts if it
- needs to. Unfortunately, some BIOSes do not -- especially those in
- many of the newer IBM Thinkpads. If you experience hangs when you
- suspend, try setting this to Y. Otherwise, say N.
-
-config APM_REAL_MODE_POWER_OFF
- bool "Use real mode APM BIOS call to power off"
- help
- Use real mode APM BIOS calls to switch off the computer. This is
- a work-around for a number of buggy BIOSes. Switch this option on if
- your computer crashes instead of powering off properly.
-
-endif # APM
-
-source "arch/x86/kernel/cpu/cpufreq/Kconfig_32"
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-config PCI
- bool "PCI support" if !X86_VISWS
- depends on !X86_VOYAGER
- default y if X86_VISWS
- select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
- The PCI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
-
-choice
- prompt "PCI access mode"
- depends on PCI && !X86_VISWS
- default PCI_GOANY
- ---help---
- On PCI systems, the BIOS can be used to detect the PCI devices and
- determine their configuration. However, some old PCI motherboards
- have BIOS bugs and may crash if this is done. Also, some embedded
- PCI-based systems don't have any BIOS at all. Linux can also try to
- detect the PCI hardware directly without using the BIOS.
-
- With this option, you can specify how Linux should detect the
- PCI devices. If you choose "BIOS", the BIOS will be used,
- if you choose "Direct", the BIOS won't be used, and if you
- choose "MMConfig", then PCI Express MMCONFIG will be used.
- If you choose "Any", the kernel will try MMCONFIG, then the
- direct access method and falls back to the BIOS if that doesn't
- work. If unsure, go with the default, which is "Any".
-
-config PCI_GOBIOS
- bool "BIOS"
-
-config PCI_GOMMCONFIG
- bool "MMConfig"
-
-config PCI_GODIRECT
- bool "Direct"
-
-config PCI_GOANY
- bool "Any"
-
-endchoice
-
-config PCI_BIOS
- bool
- depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
- default y
-
-config PCI_DIRECT
- bool
- depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
- default y
-
-config PCI_MMCONFIG
- bool
- depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
- default y
-
-config PCI_DOMAINS
- bool
- depends on PCI
- default y
-
-source "drivers/pci/pcie/Kconfig"
-
-source "drivers/pci/Kconfig"
-
-config ISA_DMA_API
- bool
- default y
-
-config ISA
- bool "ISA support"
- depends on !(X86_VOYAGER || X86_VISWS)
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. Other bus systems are PCI, EISA, MicroChannel
- (MCA) or VESA. ISA is an older system, now being displaced by PCI;
- newer boards don't support it. If you have ISA, say Y, otherwise N.
-
-config EISA
- bool "EISA support"
- depends on ISA
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-source "drivers/eisa/Kconfig"
-
-config MCA
- bool "MCA support" if !(X86_VISWS || X86_VOYAGER)
- default y if X86_VOYAGER
- help
- MicroChannel Architecture is found in some IBM PS/2 machines and
- laptops. It is a bus system similar to PCI or ISA. See
- <file:Documentation/mca.txt> (and especially the web page given
- there) before attempting to build an MCA bus kernel.
-
-source "drivers/mca/Kconfig"
-
-config SCx200
- tristate "NatSemi SCx200 support"
- depends on !X86_VOYAGER
- help
- This provides basic support for National Semiconductor's
- (now AMD's) Geode processors. The driver probes for the
- PCI-IDs of several on-chip devices, so its a good dependency
- for other scx200_* drivers.
-
- If compiled as a module, the driver is named scx200.
-
-config SCx200HR_TIMER
- tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
- depends on SCx200 && GENERIC_TIME
- default y
- help
- This driver provides a clocksource built upon the on-chip
- 27MHz high-resolution timer. Its also a workaround for
- NSC Geode SC-1100's buggy TSC, which loses time when the
- processor goes idle (as is done by the scheduler). The
- other workaround is idle=poll boot option.
-
-config GEODE_MFGPT_TIMER
- bool "Geode Multi-Function General Purpose Timer (MFGPT) events"
- depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
- default y
- help
- This driver provides a clock event source based on the MFGPT
- timer(s) in the CS5535 and CS5536 companion chip for the geode.
- MFGPTs have a better resolution and max interval than the
- generic PIT, and are suitable for use as high-res timers.
-
-config K8_NB
- def_bool y
- depends on AGP_AMD64
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "kernel/Kconfig.instrumentation"
-
-source "arch/x86/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
-config GENERIC_PENDING_IRQ
- bool
- depends on GENERIC_HARDIRQS && SMP
- default y
-
-config X86_SMP
- bool
- depends on SMP && !X86_VOYAGER
- default y
-
-config X86_HT
- bool
- depends on SMP && !(X86_VISWS || X86_VOYAGER)
- default y
-
-config X86_BIOS_REBOOT
- bool
- depends on !(X86_VISWS || X86_VOYAGER)
- default y
-
-config X86_TRAMPOLINE
- bool
- depends on X86_SMP || (X86_VOYAGER && SMP)
- default y
-
-config KTIME_SCALAR
- bool
- default y