Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

2 files changed, 49 insertions, 18 deletions

diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
index fbca22d9c8b..5d86fc19029 100644
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -21,7 +21,6 @@
 
 # Definitions for MICROBLAZE0
 comment "Definitions for MICROBLAZE0"
-	depends on ALLOW_EDIT_AUTO
 
 config KERNEL_BASE_ADDR
 	hex "Physical address where Linux Kernel is"
@@ -30,33 +29,33 @@ config KERNEL_BASE_ADDR
 	  BASE Address for kernel
 
 config XILINX_MICROBLAZE0_FAMILY
-	string "Targetted FPGA family" if ALLOW_EDIT_AUTO
+	string "Targetted FPGA family"
 	default "virtex5"
 
 config XILINX_MICROBLAZE0_USE_MSR_INSTR
-	int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO
-	default 1
+	int "USE_MSR_INSTR range (0:1)"
+	default 0
 
 config XILINX_MICROBLAZE0_USE_PCMP_INSTR
-	int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO
-	default 1
+	int "USE_PCMP_INSTR range (0:1)"
+	default 0
 
 config XILINX_MICROBLAZE0_USE_BARREL
-	int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO
-	default 1
+	int "USE_BARREL range (0:1)"
+	default 0
 
 config XILINX_MICROBLAZE0_USE_DIV
-	int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO
-	default 1
+	int "USE_DIV range (0:1)"
+	default 0
 
 config XILINX_MICROBLAZE0_USE_HW_MUL
-	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO
-	default 2
+	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
+	default 0
 
 config XILINX_MICROBLAZE0_USE_FPU
-	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO
-	default 2
+	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
+	default 0
 
 config XILINX_MICROBLAZE0_HW_VER
-	string "Core version number" if ALLOW_EDIT_AUTO
+	string "Core version number"
 	default 7.10.d
diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts
index 29993f62b30..2d5c41767cd 100644
--- a/arch/microblaze/platform/generic/system.dts
+++ b/arch/microblaze/platform/generic/system.dts
@@ -32,11 +32,16 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "xlnx,microblaze";
+	hard-reset-gpios = <&LEDs_8Bit 2 1>;
 	model = "testing";
 	DDR2_SDRAM: memory@90000000 {
 		device_type = "memory";
 		reg = < 0x90000000 0x10000000 >;
 	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
 	chosen {
 		bootargs = "console=ttyUL0,115200 highres=on";
 		linux,stdout-path = "/plb@0/serial@84000000";
@@ -127,7 +132,7 @@
 	mb_plb: plb@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
 		ranges ;
 		FLASH: flash@a0000000 {
 			bank-width = <2>;
@@ -214,12 +219,12 @@
 			#size-cells = <1>;
 			compatible = "xlnx,compound";
 			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b";
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
 				device_type = "network";
 				interrupt-parent = <&xps_intc_0>;
 				interrupts = < 5 2 >;
 				llink-connected = <&PIM3>;
-				local-mac-address = [ 02 00 00 00 00 00 ];
+				local-mac-address = [ 00 0a 35 00 00 00 ];
 				reg = < 0x81c00000 0x40 >;
 				xlnx,bus2core-clk-ratio = <0x1>;
 				xlnx,phy-type = <0x1>;
@@ -261,6 +266,33 @@
 			xlnx,is-dual = <0x0>;
 			xlnx,tri-default = <0xffffffff>;
 			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
 		} ;
 		RS232_Uart_1: serial@84000000 {
 			clock-frequency = <125000000>;