[MIPS] Remove Momentum Ocelot support.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 files changed, 0 insertions, 782 deletions

diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile
deleted file mode 100644
index 1df5fe23c64..00000000000
--- a/arch/mips/gt64120/momenco_ocelot/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for Momentum's Ocelot board.
-#
-
-obj-y	 		+= irq.o ocelot-platform.o prom.o reset.o setup.o
-
-obj-$(CONFIG_KGDB)	+= dbg_io.o
diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
deleted file mode 100644
index 32d6fb4ee67..00000000000
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-
-#include <asm/serial.h> /* For the serial port location and base baud */
-
-/* --- CONFIG --- */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-/* --- END OF CONFIG --- */
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-
-/* [jsun] we use the second serial port for kdb */
-#define         BASE                    OCELOT_SERIAL1_BASE
-#define         MAX_BAUD                OCELOT_BASE_BAUD
-
-/* === END OF CONFIG === */
-
-#define         REG_OFFSET              4
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-	/* disable interrupts */
-	UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-	/* set up baud rate */
-	{
-		uint32 divisor;
-
-		/* set DIAB bit */
-		UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-		/* set divisor */
-		divisor = MAX_BAUD / baud;
-		UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-		UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-		/* clear DIAB bit */
-		UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-	}
-
-	/* set data format */
-	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-uint8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_38400,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-	return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_38400,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
-	UART16550_WRITE(OFS_SEND_BUFFER, byte);
-	return 1;
-}
diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c
deleted file mode 100644
index 2585d9dbda3..00000000000
--- a/arch/mips/gt64120/momenco_ocelot/irq.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001, 2003 Ralf Baechle (ralf@gnu.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause();
-
-	if (pending & STATUSF_IP2)		/* int0 hardware line */
-		do_IRQ(2);
-	else if (pending & STATUSF_IP3)		/* int1 hardware line */
-		do_IRQ(3);
-	else if (pending & STATUSF_IP4)		/* int2 hardware line */
-		do_IRQ(4);
-	else if (pending & STATUSF_IP5)		/* int3 hardware line */
-		do_IRQ(5);
-	else if (pending & STATUSF_IP6)		/* int4 hardware line */
-		do_IRQ(6);
-	else if (pending & STATUSF_IP7)		/* cpu timer */
-		do_IRQ(7);
-	else {
-		/*
-		 * Now look at the extended interrupts
-		 */
-		pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
-
-		if (pending & STATUSF_IP8)		/* int6 hardware line */
-			do_IRQ(8);
-		else if (pending & STATUSF_IP9)		/* int7 hardware line */
-			do_IRQ(9);
-		else if (pending & STATUSF_IP10)	/* int8 hardware line */
-			do_IRQ(10);
-		else if (pending & STATUSF_IP11)	/* int9 hardware line */
-			do_IRQ(11);
-	}
-}
-
-void __init arch_init_irq(void)
-{
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 * int-handler is not on bootstrap
-	 */
-	clear_c0_status(ST0_IM);
-	local_irq_disable();
-
-	mips_cpu_irq_init();
-	rm7k_cpu_irq_init();
-}
diff --git a/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c b/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c
deleted file mode 100644
index 81d9031a5a2..00000000000
--- a/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- *
- * A NS16552 DUART with a 20MHz crystal.
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define OCELOT_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
-
-static struct plat_serial8250_port uart8250_data[] = {
-	{
-		.mapbase	= 0xe0001020,
-		.irq		= 4,
-		.uartclk	= 20000000,
-		.iotype		= UPIO_MEM,
-		.flags		= OCELOT_UART_FLAGS,
-		.regshift	= 2,
-	},
-	{ },
-};
-
-static struct platform_device uart8250_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= uart8250_data,
-	},
-};
-
-static int __init uart8250_init(void)
-{
-	return platform_device_register(&uart8250_device);
-}
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the Momenco Ocelot");
diff --git a/arch/mips/gt64120/momenco_ocelot/ocelot_pld.h b/arch/mips/gt64120/momenco_ocelot/ocelot_pld.h
deleted file mode 100644
index 11f02c402b2..00000000000
--- a/arch/mips/gt64120/momenco_ocelot/ocelot_pld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Ocelot Board Register Definitions
- *
- * (C) 2001 Red Hat, Inc.
- *
- * GPL'd
- */
-#ifndef __MOMENCO_OCELOT_PLD_H__
-#define __MOMENCO_OCELOT_PLD_H__
-
-#define OCELOT_CS0_ADDR (0xe0020000)
-
-#define OCELOT_REG_BOARDREV (0)
-#define OCELOT_REG_PLD1_ID (1)
-#define OCELOT_REG_PLD2_ID (2)
-#define OCELOT_REG_RESET_STATUS (3)
-#define OCELOT_REG_BOARD_STATUS (4)
-#define OCELOT_REG_CPCI_ID (5)
-#define OCELOT_REG_I2C_CTRL (8)
-#define OCELOT_REG_EEPROM_MODE (9)
-#define OCELOT_REG_INTMASK (10)
-#define OCELOT_REG_INTSTATUS (11)
-#define OCELOT_REG_INTSET (12)
-#define OCELOT_REG_INTCLR (13)
-
-#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y)
-#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x)
-
-
-#endif /* __MOMENCO_OCELOT_PLD_H__ */
diff --git a/arch/mips/gt64120/momenco_ocelot/prom.c b/arch/mips/gt64120/momenco_ocelot/prom.c
deleted file mode 100644
index c71c85276c7..00000000000
--- a/arch/mips/gt64120/momenco_ocelot/prom.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-
-struct callvectors* debug_vectors;
-
-extern unsigned long gt64120_base;
-
-const char *get_system_type(void)
-{
-	return "Momentum Ocelot";
-}
-
-/* [jsun@junsun.net] PMON passes arguments in C main() style */
-void __init prom_init(void)
-{
-	int argc = fw_arg0;
-	char **arg = (char **) fw_arg1;
-	char **env = (char **) fw_arg2;
-	struct callvectors *cv = (struct callvectors *) fw_arg3;
-	int i;
-
-	/* save the PROM vectors for debugging use */
-	debug_vectors = cv;
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, arg[i]);
-		strcat(arcs_cmdline, " ");
-	}
-
-	mips_machgroup = MACH_GROUP_MOMENCO;
-	mips_machtype = MACH_MOMENCO_OCELOT;
-
-	while (*env) {
-		if (strncmp("gtbase", *env, 6) == 0) {
-			gt64120_base = simple_strtol(*env + strlen("gtbase="),
-							NULL, 16);
-			break;
-		}
-		*env++;
-	}
-
-	debug_vectors->printf("Booting Linux kernel...\n");
-
-	/* All the boards have at least 64MiB. If there's more, we
-	   detect and register it later */
-	add_memory_region(0, 64 << 20, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/gt64120/momenco_ocelot/reset.c b/arch/mips/gt64120/momenco_ocelot/reset.c
deleted file mode 100644
index 3fd499adf4c..00000000000
--- a/arch/mips/gt64120/momenco_ocelot/reset.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <linux/delay.h>
-
-void momenco_ocelot_restart(char *command)
-{
-	void *nvram = ioremap_nocache(0x2c807000, 0x1000);
-
-	if (!nvram) {
-		printk(KERN_NOTICE "ioremap of reset register failed\n");
-		return;
-	}
-	writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to
-					assert reset in 1/16 second */
-	mdelay(10+(1000/16));
-	iounmap(nvram);
-	printk(KERN_NOTICE "Watchdog reset failed\n");
-}
-
-void momenco_ocelot_halt(void)
-{
-	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-	while (1)
-		__asm__(".set\tmips3\n\t"
-	                "wait\n\t"
-			".set\tmips0");
-}
-
-void momenco_ocelot_power_off(void)
-{
-	momenco_ocelot_halt();
-}
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
deleted file mode 100644
index 98b6fb38096..00000000000
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * setup.c
- *
- * BRIEF MODULE DESCRIPTION
- * Momentum Computer Ocelot (CP7000) - board dependent boot routines
- *
- * Copyright (C) 1996, 1997, 2001, 06  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2001 Red Hat, Inc.
- * Copyright (C) 2002 Momentum Computer
- *
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/timex.h>
-#include <linux/vmalloc.h>
-#include <linux/pm.h>
-
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/traps.h>
-#include <linux/bootmem.h>
-#include <linux/initrd.h>
-#include <asm/gt64120.h>
-#include "ocelot_pld.h"
-
-unsigned long gt64120_base = KSEG1ADDR(GT_DEF_BASE);
-
-/* These functions are used for rebooting or halting the machine*/
-extern void momenco_ocelot_restart(char *command);
-extern void momenco_ocelot_halt(void);
-extern void momenco_ocelot_power_off(void);
-
-extern void momenco_ocelot_irq_setup(void);
-
-static char reset_reason;
-
-#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> PAGE_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6)|1)
-
-static void __init setup_l3cache(unsigned long size);
-
-/* setup code for a handoff from a version 1 PMON 2000 PROM */
-static void PMON_v1_setup(void)
-{
-	/* A wired TLB entry for the GT64120A and the serial port. The
-	   GT64120A is going to be hit on every IRQ anyway - there's
-	   absolutely no point in letting it be a random TLB entry, as
-	   it'll just cause needless churning of the TLB. And we use
-	   the other half for the serial port, which is just a PITA
-	   otherwise :)
-
-		Device			Physical	Virtual
-		GT64120 Internal Regs	0x24000000	0xe0000000
-		UARTs (CS2)		0x2d000000	0xe0001000
-	*/
-	add_wired_entry(ENTRYLO(0x24000000), ENTRYLO(0x2D000000), 0xe0000000, PM_4K);
-
-	/* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
-	   in the CS[012] region. We can't use ioremap() yet. The NVRAM
-	   is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
-
-		Ocelot PLD (CS0)	0x2c000000	0xe0020000
-		NVRAM			0x2c800000	0xe0030000
-	*/
-
-	add_temporary_entry(ENTRYLO(0x2C000000), ENTRYLO(0x2d000000), 0xe0020000, PM_64K);
-
-	/* Relocate the CS3/BootCS region */
-  	GT_WRITE(GT_CS3BOOTLD_OFS, 0x2f000000 >> 21);
-
-	/* Relocate CS[012] */
- 	GT_WRITE(GT_CS20LD_OFS, 0x2c000000 >> 21);
-
-	/* Relocate the GT64120A itself... */
-	GT_WRITE(GT_ISD_OFS, 0x24000000 >> 21);
-	mb();
-	gt64120_base = 0xe0000000;
-
-	/* ...and the PCI0 view of it. */
-	GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000020);
-	GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000000);
-	GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000024);
-	GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000001);
-}
-
-/* setup code for a handoff from a version 2 PMON 2000 PROM */
-void PMON_v2_setup()
-{
-	/* A wired TLB entry for the GT64120A and the serial port. The
-	   GT64120A is going to be hit on every IRQ anyway - there's
-	   absolutely no point in letting it be a random TLB entry, as
-	   it'll just cause needless churning of the TLB. And we use
-	   the other half for the serial port, which is just a PITA
-	   otherwise :)
-
-		Device			Physical	Virtual
-		GT64120 Internal Regs	0xf4000000	0xe0000000
-		UARTs (CS2)		0xfd000000	0xe0001000
-	*/
-	add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xfD000000), 0xe0000000, PM_4K);
-
-	/* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
-	   in the CS[012] region. We can't use ioremap() yet. The NVRAM
-	   is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
-
-		Ocelot PLD (CS0)	0xfc000000	0xe0020000
-		NVRAM			0xfc800000	0xe0030000
-	*/
-	add_temporary_entry(ENTRYLO(0xfC000000), ENTRYLO(0xfd000000), 0xe0020000, PM_64K);
-
-	gt64120_base = 0xe0000000;
-}
-
-void __init plat_mem_setup(void)
-{
-	void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
-	unsigned int tmpword;
-
-	_machine_restart = momenco_ocelot_restart;
-	_machine_halt = momenco_ocelot_halt;
-	pm_power_off = momenco_ocelot_power_off;
-
-	/*
-	 * initrd_start = (unsigned long)ocelot_initrd_start;
-	 * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
-	 * initrd_below_start_ok = 1;
-	 */
-
-	/* do handoff reconfiguration */
-	if (gt64120_base == KSEG1ADDR(GT_DEF_BASE))
-		PMON_v1_setup();
-	else
-		PMON_v2_setup();
-
-	/* Turn off the Bit-Error LED */
-	OCELOT_PLD_WRITE(0x80, INTCLR);
-
-	/* Relocate all the PCI1 stuff, not that we use it */
-	GT_WRITE(GT_PCI1IOLD_OFS, 0x30000000 >> 21);
-	GT_WRITE(GT_PCI1M0LD_OFS, 0x32000000 >> 21);
-	GT_WRITE(GT_PCI1M1LD_OFS, 0x34000000 >> 21);
-
-	/* Relocate PCI0 I/O and Mem0 */
-	GT_WRITE(GT_PCI0IOLD_OFS, 0x20000000 >> 21);
-	GT_WRITE(GT_PCI0M0LD_OFS, 0x22000000 >> 21);
-
-	/* Relocate PCI0 Mem1 */
-	GT_WRITE(GT_PCI0M1LD_OFS, 0x36000000 >> 21);
-
-	/* For the initial programming, we assume 512MB configuration */
-	/* Relocate the CPU's view of the RAM... */
-	GT_WRITE(GT_SCS10LD_OFS, 0);
-	GT_WRITE(GT_SCS10HD_OFS, 0x0fe00000 >> 21);
-	GT_WRITE(GT_SCS32LD_OFS, 0x10000000 >> 21);
-	GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21);
-
-	GT_WRITE(GT_SCS1LD_OFS, 0xff);
-	GT_WRITE(GT_SCS1HD_OFS, 0x00);
-	GT_WRITE(GT_SCS0LD_OFS, 0);
-	GT_WRITE(GT_SCS0HD_OFS, 0xff);
-	GT_WRITE(GT_SCS3LD_OFS, 0xff);
-	GT_WRITE(GT_SCS3HD_OFS, 0x00);
-	GT_WRITE(GT_SCS2LD_OFS, 0);
-	GT_WRITE(GT_SCS2HD_OFS, 0xff);
-
-	/* ...and the PCI0 view of it. */
-	GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000010);
-	GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x00000000);
-	GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
-	GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x10000000);
-	GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000);
-	GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000);
-
-	tmpword = OCELOT_PLD_READ(BOARDREV);
-	if (tmpword < 26)
-		printk("Momenco Ocelot: Board Assembly Rev. %c\n", 'A'+tmpword);
-	else
-		printk("Momenco Ocelot: Board Assembly Revision #0x%x\n", tmpword);
-
-	tmpword = OCELOT_PLD_READ(PLD1_ID);
-	printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15);
-	tmpword = OCELOT_PLD_READ(PLD2_ID);
-	printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15);
-	tmpword = OCELOT_PLD_READ(RESET_STATUS);
-	printk("Reset reason: 0x%x\n", tmpword);
-	reset_reason = tmpword;
-	OCELOT_PLD_WRITE(0xff, RESET_STATUS);
-
-	tmpword = OCELOT_PLD_READ(BOARD_STATUS);
-	printk("Board Status register: 0x%02x\n", tmpword);
-	printk("  - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
-	printk("  - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
-	printk("  - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not");
-	printk("  - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
-	printk("  - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
-
-	if (tmpword&12)
-		l3func((1<<(((tmpword&12) >> 2)+20)));
-
-	switch(tmpword &3) {
-	case 3:
-		/* 512MiB */
-		/* Decoders are allready set -- just add the
-		 * appropriate region */
-		add_memory_region( 0x40<<20,  0xC0<<20, BOOT_MEM_RAM);
-		add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM);
-		break;
-	case 2:
-		/* 256MiB -- two banks of 128MiB */
-		GT_WRITE(GT_SCS10HD_OFS, 0x07e00000 >> 21);
-		GT_WRITE(GT_SCS32LD_OFS, 0x08000000 >> 21);
-		GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21);
-
-		GT_WRITE(GT_SCS0HD_OFS, 0x7f);
-		GT_WRITE(GT_SCS2LD_OFS, 0x80);
-		GT_WRITE(GT_SCS2HD_OFS, 0xff);
-
-		/* reconfigure the PCI0 interface view of memory */
-		GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
-		GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x08000000);
-		GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000);
-		GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000);
-
-		add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
-		add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM);
-		break;
-	case 1:
-		/* 128MiB -- 64MiB per bank */
-		GT_WRITE(GT_SCS10HD_OFS, 0x03e00000 >> 21);
-		GT_WRITE(GT_SCS32LD_OFS, 0x04000000 >> 21);
-		GT_WRITE(GT_SCS32HD_OFS, 0x07e00000 >> 21);
-
-		GT_WRITE(GT_SCS0HD_OFS, 0x3f);
-		GT_WRITE(GT_SCS2LD_OFS, 0x40);
-		GT_WRITE(GT_SCS2HD_OFS, 0x7f);
-
-		/* reconfigure the PCI0 interface view of memory */
-		GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
-		GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000);
-		GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x03fff000);
-		GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x03fff000);
-
-		/* add the appropriate region */
-		add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
-		break;
-	case 0:
-		/* 64MiB */
-		GT_WRITE(GT_SCS10HD_OFS, 0x01e00000 >> 21);
-		GT_WRITE(GT_SCS32LD_OFS, 0x02000000 >> 21);
-		GT_WRITE(GT_SCS32HD_OFS, 0x03e00000 >> 21);
-
-		GT_WRITE(GT_SCS0HD_OFS, 0x1f);
-		GT_WRITE(GT_SCS2LD_OFS, 0x20);
-		GT_WRITE(GT_SCS2HD_OFS, 0x3f);
-
-		/* reconfigure the PCI0 interface view of memory */
-		GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
-		GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000);
-		GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x01fff000);
-		GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x01fff000);
-
-		break;
-	}
-
-	/* Fix up the DiskOnChip mapping */
-	GT_WRITE(GT_DEV_B3_OFS, 0xfef73);
-}
-
-extern int rm7k_tcache_enabled;
-/*
- * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
- */
-#define Page_Invalidate_T 0x16
-static void __init setup_l3cache(unsigned long size)
-{
-	int register i;
-	unsigned long tmp;
-
-	printk("Enabling L3 cache...");
-
-	/* Enable the L3 cache in the GT64120A's CPU Configuration register */
-	tmp = GT_READ(GT_CPU_OFS);
-	GT_WRITE(GT_CPU_OFS, tmp | (1<<14));
-
-	/* Enable the L3 cache in the CPU */
-	set_c0_config(1<<12 /* CONF_TE */);
-
-	/* Clear the cache */
-	write_c0_taglo(0);
-	write_c0_taghi(0);
-
-	for (i=0; i < size; i+= 4096) {
-		__asm__ __volatile__ (
-			".set noreorder\n\t"
-			".set mips3\n\t"
-			"cache %1, (%0)\n\t"
-			".set mips0\n\t"
-			".set reorder"
-			:
-			: "r" (KSEG0ADDR(i)),
-			  "i" (Page_Invalidate_T));
-	}
-
-	/* Let the RM7000 MM code know that the tertiary cache is enabled */
-	rm7k_tcache_enabled = 1;
-
-	printk("Done\n");
-}
-
-
-/* This needs to be one of the first initcalls, because no I/O port access
-   can work before this */
-
-static int io_base_ioremap(void)
-{
-	void *io_remap_range = ioremap(GT_PCI_IO_BASE, GT_PCI_IO_SIZE);
-
-	if (!io_remap_range) {
-		panic("Could not ioremap I/O port range");
-	}
-	set_io_port_base(io_remap_range - GT_PCI_IO_BASE);
-
-	return 0;
-}
-
-module_init(io_base_ioremap);