[MIPS] Remove Momenco Ocelot C support

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/configs/ocelot_c_defconfig
 delete mode 100644 arch/mips/momentum/ocelot_c/Makefile
 delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c
 delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c
 delete mode 100644 arch/mips/momentum/ocelot_c/irq.c
 delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
 delete mode 100644 arch/mips/momentum/ocelot_c/platform.c
 delete mode 100644 arch/mips/momentum/ocelot_c/prom.c
 delete mode 100644 arch/mips/momentum/ocelot_c/reset.c
 delete mode 100644 arch/mips/momentum/ocelot_c/setup.c
 delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c
 delete mode 100644 arch/mips/pci/fixup-ocelot-c.c
 delete mode 100644 arch/mips/pci/pci-ocelot-c.c

3 files changed, 0 insertions, 187 deletions

diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 3ff56b84add..a3e741e190f 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -31,7 +31,6 @@ obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_MOMENCO_OCELOT)	+= fixup-ocelot.o pci-ocelot.o
 obj-$(CONFIG_MOMENCO_OCELOT_3)	+= fixup-ocelot3.o
-obj-$(CONFIG_MOMENCO_OCELOT_C)	+= fixup-ocelot-c.o pci-ocelot-c.o
 obj-$(CONFIG_PMC_YOSEMITE)	+= fixup-yosemite.o ops-titan.o ops-titan-ht.o \
 				   pci-yosemite.o
 obj-$(CONFIG_SGI_IP27)		+= ops-bridge.o pci-ip27.o
diff --git a/arch/mips/pci/fixup-ocelot-c.c b/arch/mips/pci/fixup-ocelot-c.c
deleted file mode 100644
index 6616648712c..00000000000
--- a/arch/mips/pci/fixup-ocelot-c.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Based on work for the Linux port to the Ocelot board, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/momentum/ocelot_g/pci.c
- *     Board-specific PCI routines for mv64340 controller.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int bus = dev->bus->number;
-
-	if (bus == 0 && slot == 1)
-		return 2;       /* PCI-X A */
-	if (bus == 1 && slot == 1)
-		return 12;      /* PCI-X B */
-	if (bus == 1 && slot == 2)
-		return 4;       /* PCI B */
-
-return 0;
-	panic("Whooops in pcibios_map_irq");
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/pci-ocelot-c.c b/arch/mips/pci/pci-ocelot-c.c
deleted file mode 100644
index 027759f7c90..00000000000
--- a/arch/mips/pci/pci-ocelot-c.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org)
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/mv643xx.h>
-
-#include <linux/init.h>
-
-#include <asm/marvell.h>
-
-/*
- * We assume the address ranges have already been setup appropriately by
- * the firmware.  PMON in case of the Ocelot C does that.
- */
-static struct resource mv_pci_io_mem0_resource = {
-	.name	= "MV64340 PCI0 IO MEM",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource mv_pci_mem0_resource = {
-	.name	= "MV64340 PCI0 MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct mv_pci_controller mv_bus0_controller = {
-	.pcic = {
-		.pci_ops	= &mv_pci_ops,
-		.mem_resource	= &mv_pci_mem0_resource,
-		.io_resource	= &mv_pci_io_mem0_resource,
-	},
-	.config_addr	= MV64340_PCI_0_CONFIG_ADDR,
-	.config_vreg	= MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
-};
-
-static uint32_t mv_io_base, mv_io_size;
-
-static void mv64340_pci0_init(void)
-{
-	uint32_t mem0_base, mem0_size;
-	uint32_t io_base, io_size;
-
-	io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
-	io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
-	mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
-	mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
-
-	mv_pci_io_mem0_resource.start		= 0;
-	mv_pci_io_mem0_resource.end		= io_size - 1;
-	mv_pci_mem0_resource.start		= mem0_base;
-	mv_pci_mem0_resource.end		= mem0_base + mem0_size - 1;
-	mv_bus0_controller.pcic.mem_offset	= mem0_base;
-	mv_bus0_controller.pcic.io_offset	= 0;
-
-	ioport_resource.end		= io_size - 1;
-
-	register_pci_controller(&mv_bus0_controller.pcic);
-
-	mv_io_base = io_base;
-	mv_io_size = io_size;
-}
-
-static struct resource mv_pci_io_mem1_resource = {
-	.name	= "MV64340 PCI1 IO MEM",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource mv_pci_mem1_resource = {
-	.name	= "MV64340 PCI1 MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct mv_pci_controller mv_bus1_controller = {
-	.pcic = {
-		.pci_ops	= &mv_pci_ops,
-		.mem_resource	= &mv_pci_mem1_resource,
-		.io_resource	= &mv_pci_io_mem1_resource,
-	},
-	.config_addr	= MV64340_PCI_1_CONFIG_ADDR,
-	.config_vreg	= MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
-};
-
-static __init void mv64340_pci1_init(void)
-{
-	uint32_t mem0_base, mem0_size;
-	uint32_t io_base, io_size;
-
-	io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
-	io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
-	mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
-	mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
-
-	/*
-	 * Here we assume the I/O window of second bus to be contiguous with
-	 * the first.  A gap is no problem but would waste address space for
-	 * remapping the port space.
-	 */
-	mv_pci_io_mem1_resource.start		= mv_io_size;
-	mv_pci_io_mem1_resource.end		= mv_io_size + io_size - 1;
-	mv_pci_mem1_resource.start		= mem0_base;
-	mv_pci_mem1_resource.end		= mem0_base + mem0_size - 1;
-	mv_bus1_controller.pcic.mem_offset	= mem0_base;
-	mv_bus1_controller.pcic.io_offset	= 0;
-
-	ioport_resource.end		= io_base + io_size -mv_io_base - 1;
-
-	register_pci_controller(&mv_bus1_controller.pcic);
-
-	mv_io_size = io_base + io_size - mv_io_base;
-}
-
-static __init int __init ocelot_c_pci_init(void)
-{
-	unsigned long io_v_base;
-	uint32_t enable;
-
-	enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
-
-	/*
-	 * We require at least one enabled I/O or PCI memory window or we
-	 * will ignore this PCI bus.  We ignore PCI windows 1, 2 and 3.
-	 */
-	if (enable & (0x01 <<  9) || enable & (0x01 << 10))
-		mv64340_pci0_init();
-
-	if (enable & (0x01 << 14) || enable & (0x01 << 15))
-		mv64340_pci1_init();
-
-	if (mv_io_size) {
-		io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
-		if (!io_v_base)
-			panic("Could not ioremap I/O port range");
-
-		set_io_port_base(io_v_base);
-	}
-
-	return 0;
-}
-
-arch_initcall(ocelot_c_pci_init);