aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2005-09-03 15:56:06 -0700
committerLinus Torvalds <torvalds@evo.osdl.org>2005-09-05 00:06:02 -0700
commit0fdda107e10133583f31c72326959555bfb61042 (patch)
tree0173750da11cd60fbe9b2062349ad473401bfe4c /arch/mips
parent8bb670c1407c2a4890810fd3e348dac1b89e669e (diff)
[PATCH] mips: remove VR4181 support
There seem to be no more users or interest in the NEC Osprey evaluation system for the NEC VR4181 SOC which is an old part anyway, so remove the code. More information on the Osprey can be found at http://www.linux-mips.org/wiki/Osprey. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/configs/osprey_defconfig618
-rw-r--r--arch/mips/vr4181/common/Makefile7
-rw-r--r--arch/mips/vr4181/common/int_handler.S206
-rw-r--r--arch/mips/vr4181/common/irq.c239
-rw-r--r--arch/mips/vr4181/common/serial.c51
-rw-r--r--arch/mips/vr4181/common/time.c145
-rw-r--r--arch/mips/vr4181/osprey/Makefile7
-rw-r--r--arch/mips/vr4181/osprey/dbg_io.c136
-rw-r--r--arch/mips/vr4181/osprey/prom.c49
-rw-r--r--arch/mips/vr4181/osprey/reset.c40
-rw-r--r--arch/mips/vr4181/osprey/setup.c68
11 files changed, 0 insertions, 1566 deletions
diff --git a/arch/mips/configs/osprey_defconfig b/arch/mips/configs/osprey_defconfig
deleted file mode 100644
index 989cb9e7ae8..00000000000
--- a/arch/mips/configs/osprey_defconfig
+++ /dev/null
@@ -1,618 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
-#
-CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
-# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-CONFIG_NEC_OSPREY=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_VR4181=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_PREEMPT is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="ip=bootp ether=46,0x03fe0300,eth0"
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/vr4181/common/Makefile b/arch/mips/vr4181/common/Makefile
deleted file mode 100644
index f7587ca64ea..00000000000
--- a/arch/mips/vr4181/common/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for common code of NEC vr4181 based boards
-#
-
-obj-y := irq.o int_handler.o serial.o time.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/vr4181/common/int_handler.S b/arch/mips/vr4181/common/int_handler.S
deleted file mode 100644
index 2c041b8ee52..00000000000
--- a/arch/mips/vr4181/common/int_handler.S
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * arch/mips/vr4181/common/int_handler.S
- *
- * Adapted to the VR4181 and almost entirely rewritten:
- * Copyright (C) 1999 Bradley D. LaRonde and Michael Klar
- *
- * Clean up to conform to the new IRQ
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
-
-#include <asm/vr4181/vr4181.h>
-
-/*
- * [jsun]
- * See include/asm/vr4181/irq.h for IRQ assignment and strategy.
- */
-
- .text
- .set noreorder
-
- .align 5
- NESTED(vr4181_handle_irq, PT_SIZE, ra)
-
- .set noat
- SAVE_ALL
- CLI
-
- .set at
- .set noreorder
-
- mfc0 t0, CP0_CAUSE
- mfc0 t2, CP0_STATUS
-
- and t0, t2
-
- /* we check IP3 first; it happens most frequently */
- andi t1, t0, STATUSF_IP3
- bnez t1, ll_cpu_ip3
- andi t1, t0, STATUSF_IP2
- bnez t1, ll_cpu_ip2
- andi t1, t0, STATUSF_IP7 /* cpu timer */
- bnez t1, ll_cputimer_irq
- andi t1, t0, STATUSF_IP4
- bnez t1, ll_cpu_ip4
- andi t1, t0, STATUSF_IP5
- bnez t1, ll_cpu_ip5
- andi t1, t0, STATUSF_IP6
- bnez t1, ll_cpu_ip6
- andi t1, t0, STATUSF_IP0 /* software int 0 */
- bnez t1, ll_cpu_ip0
- andi t1, t0, STATUSF_IP1 /* software int 1 */
- bnez t1, ll_cpu_ip1
- nop
-
- .set reorder
-do_spurious:
- j spurious_interrupt
-
-/*
- * regular CPU irqs
- */
-ll_cputimer_irq:
- li a0, VR4181_IRQ_TIMER
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-
-ll_cpu_ip0:
- li a0, VR4181_IRQ_SW1
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip1:
- li a0, VR4181_IRQ_SW2
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip3:
- li a0, VR4181_IRQ_INT1
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip4:
- li a0, VR4181_IRQ_INT2
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip5:
- li a0, VR4181_IRQ_INT3
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-ll_cpu_ip6:
- li a0, VR4181_IRQ_INT4
- move a1, sp
- jal do_IRQ
- j ret_from_irq
-
-/*
- * One of the sys irq has happend.
- *
- * In the interest of speed, we first determine in the following order
- * which 16-irq block have pending interrupts:
- * sysint1 (16 sources, including cascading intrs from GPIO)
- * sysint2
- * gpio (16 intr sources)
- *
- * Then we do binary search to find the exact interrupt source.
- */
-ll_cpu_ip2:
-
- lui t3,%hi(VR4181_SYSINT1REG)
- lhu t0,%lo(VR4181_SYSINT1REG)(t3)
- lhu t2,%lo(VR4181_MSYSINT1REG)(t3)
- and t0, 0xfffb /* hack - remove RTC Long 1 intr */
- and t0, t2
- beqz t0, check_sysint2
-
- /* check for GPIO interrupts */
- andi t1, t0, 0x0100
- bnez t1, check_gpio_int
-
- /* so we have an interrupt in sysint1 which is not gpio int */
- li a0, VR4181_SYS_IRQ_BASE - 1
- j check_16
-
-check_sysint2:
-
- lhu t0,%lo(VR4181_SYSINT2REG)(t3)
- lhu t2,%lo(VR4181_MSYSINT2REG)(t3)
- and t0, 0xfffe /* hack - remove RTC Long 2 intr */
- and t0, t2
- li a0, VR4181_SYS_IRQ_BASE + 16 - 1
- j check_16
-
-check_gpio_int:
- lui t3,%hi(VR4181_GPINTMSK)
- lhu t0,%lo(VR4181_GPINTMSK)(t3)
- lhu t2,%lo(VR4181_GPINTSTAT)(t3)
- xori t0, 0xffff /* why? reverse logic? */
- and t0, t2
- li a0, VR4181_GPIO_IRQ_BASE - 1
- j check_16
-
-/*
- * When we reach check_16, we have 16-bit status in t0 and base irq number
- * in a0.
- */
-check_16:
- andi t1, t0, 0xff
- bnez t1, check_8
-
- srl t0, 8
- addi a0, 8
- j check_8
-
-/*
- * When we reach check_8, we have 8-bit status in t0 and base irq number
- * in a0.
- */
-check_8:
- andi t1, t0, 0xf
- bnez t1, check_4
-
- srl t0, 4
- addi a0, 4
- j check_4
-
-/*
- * When we reach check_4, we have 4-bit status in t0 and base irq number
- * in a0.
- */
-check_4:
- andi t0, t0, 0xf
- beqz t0, do_spurious
-
-loop:
- andi t2, t0, 0x1
- srl t0, 1
- addi a0, 1
- beqz t2, loop
-
-found_it:
- move a1, sp
- jal do_IRQ
-
- j ret_from_irq
-
- END(vr4181_handle_irq)
diff --git a/arch/mips/vr4181/common/irq.c b/arch/mips/vr4181/common/irq.c
deleted file mode 100644
index 2cdf77c5cb3..00000000000
--- a/arch/mips/vr4181/common/irq.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * linux/arch/mips/vr4181/common/irq.c
- * Completely re-written to use the new irq.c
- *
- * Credits to Bradley D. LaRonde and Michael Klar for writing the original
- * irq.c file which was derived from the common irq.c file.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/gdb-stub.h>
-
-#include <asm/vr4181/vr4181.h>
-
-/*
- * Strategy:
- *
- * We essentially have three irq controllers, CPU, system, and gpio.
- *
- * CPU irq controller is taken care by arch/mips/kernel/irq_cpu.c and
- * CONFIG_IRQ_CPU config option.
- *
- * We here provide sys_irq and gpio_irq controller code.
- */
-
-static int sys_irq_base;
-static int gpio_irq_base;
-
-/* ---------------------- sys irq ------------------------ */
-static void
-sys_irq_enable(unsigned int irq)
-{
- irq -= sys_irq_base;
- if (irq < 16) {
- *VR4181_MSYSINT1REG |= (u16)(1 << irq);
- } else {
- irq -= 16;
- *VR4181_MSYSINT2REG |= (u16)(1 << irq);
- }
-}
-
-static void
-sys_irq_disable(unsigned int irq)
-{
- irq -= sys_irq_base;
- if (irq < 16) {
- *VR4181_MSYSINT1REG &= ~((u16)(1 << irq));
- } else {
- irq -= 16;
- *VR4181_MSYSINT2REG &= ~((u16)(1 << irq));
- }
-
-}
-
-static unsigned int
-sys_irq_startup(unsigned int irq)
-{
- sys_irq_enable(irq);
- return 0;
-}
-
-#define sys_irq_shutdown sys_irq_disable
-#define sys_irq_ack sys_irq_disable
-
-static void
-sys_irq_end(unsigned int irq)
-{
- if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- sys_irq_enable(irq);
-}
-
-static hw_irq_controller sys_irq_controller = {
- "vr4181_sys_irq",
- sys_irq_startup,
- sys_irq_shutdown,
- sys_irq_enable,
- sys_irq_disable,
- sys_irq_ack,
- sys_irq_end,
- NULL /* no affinity stuff for UP */
-};
-
-/* ---------------------- gpio irq ------------------------ */
-/* gpio irq lines use reverse logic */
-static void
-gpio_irq_enable(unsigned int irq)
-{
- irq -= gpio_irq_base;
- *VR4181_GPINTMSK &= ~((u16)(1 << irq));
-}
-
-static void
-gpio_irq_disable(unsigned int irq)
-{
- irq -= gpio_irq_base;
- *VR4181_GPINTMSK |= (u16)(1 << irq);
-}
-
-static unsigned int
-gpio_irq_startup(unsigned int irq)
-{
- gpio_irq_enable(irq);
-
- irq -= gpio_irq_base;
- *VR4181_GPINTEN |= (u16)(1 << irq );
-
- return 0;
-}
-
-static void
-gpio_irq_shutdown(unsigned int irq)
-{
- gpio_irq_disable(irq);
-
- irq -= gpio_irq_base;
- *VR4181_GPINTEN &= ~((u16)(1 << irq ));
-}
-
-static void
-gpio_irq_ack(unsigned int irq)
-{
- u16 irqtype;
- u16 irqshift;
-
- gpio_irq_disable(irq);
-
- /* we clear interrupt if it is edge triggered */
- irq -= gpio_irq_base;
- if (irq < 8) {
- irqtype = *VR4181_GPINTTYPL;
- irqshift = 2 << (irq*2);
- } else {
- irqtype = *VR4181_GPINTTYPH;
- irqshift = 2 << ((irq-8)*2);
- }
- if ( ! (irqtype & irqshift) ) {
- *VR4181_GPINTSTAT = (u16) (1 << irq);
- }
-}
-
-static void
-gpio_irq_end(unsigned int irq)
-{
- if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- gpio_irq_enable(irq);
-}
-
-static hw_irq_controller gpio_irq_controller = {
- "vr4181_gpio_irq",
- gpio_irq_startup,
- gpio_irq_shutdown,
- gpio_irq_enable,
- gpio_irq_disable,
- gpio_irq_ack,
- gpio_irq_end,
- NULL /* no affinity stuff for UP */
-};
-
-/* --------------------- IRQ init stuff ---------------------- */
-
-extern asmlinkage void vr4181_handle_irq(void);
-extern void breakpoint(void);
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-extern void mips_cpu_irq_init(u32 irq_base);
-
-static struct irqaction cascade =
- { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
-static struct irqaction reserved =
- { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
-
-void __init arch_init_irq(void)
-{
- int i;
-
- set_except_vector(0, vr4181_handle_irq);
-
- /* init CPU irqs */
- mips_cpu_irq_init(VR4181_CPU_IRQ_BASE);
-
- /* init sys irqs */
- sys_irq_base = VR4181_SYS_IRQ_BASE;
- for (i=sys_irq_base; i < sys_irq_base + VR4181_NUM_SYS_IRQ; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].handler = &sys_irq_controller;
- }
-
- /* init gpio irqs */
- gpio_irq_base = VR4181_GPIO_IRQ_BASE;
- for (i=gpio_irq_base; i < gpio_irq_base + VR4181_NUM_GPIO_IRQ; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].handler = &gpio_irq_controller;
- }
-
- /* Default all ICU IRQs to off ... */
- *VR4181_MSYSINT1REG = 0;
- *VR4181_MSYSINT2REG = 0;
-
- /* We initialize the level 2 ICU registers to all bits disabled. */
- *VR4181_MPIUINTREG = 0;
- *VR4181_MAIUINTREG = 0;
- *VR4181_MKIUINTREG = 0;
-
- /* disable all GPIO intrs */
- *VR4181_GPINTMSK = 0xffff;
-
- /* vector handler. What these do is register the IRQ as non-sharable */
- setup_irq(VR4181_IRQ_INT0, &cascade);
- setup_irq(VR4181_IRQ_GIU, &cascade);
-
- /*
- * RTC interrupts are interesting. They have two destinations.
- * One is at sys irq controller, and the other is at CPU IP3 and IP4.
- * RTC timer is used as system timer.
- * We enable them here, but timer routine will register later
- * with CPU IP3/IP4.
- */
- setup_irq(VR4181_IRQ_RTCL1, &reserved);
- setup_irq(VR4181_IRQ_RTCL2, &reserved);
-}
diff --git a/arch/mips/vr4181/common/serial.c b/arch/mips/vr4181/common/serial.c
deleted file mode 100644
index 3f62c62b107..00000000000
--- a/arch/mips/vr4181/common/serial.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/vr4181/common/serial.c
- * initialize serial port on vr4181.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * [jsun, 010925]
- * You need to make sure rs_table has at least one element in
- * drivers/char/serial.c file. There is no good way to do it right
- * now. A workaround is to include CONFIG_SERIAL_MANY_PORTS in your
- * configure file, which would gives you 64 ports and wastes 11K ram.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-
-#include <asm/vr4181/vr4181.h>
-
-void __init vr4181_init_serial(void)
-{
- struct serial_struct s;
-
- /* turn on UART clock */
- *VR4181_CMUCLKMSK |= VR4181_CMUCLKMSK_MSKSIU;
-
- /* clear memory */
- memset(&s, 0, sizeof(s));
-
- s.line = 0; /* we set the first one */
- s.baud_base = 1152000;
- s.irq = VR4181_IRQ_SIU;
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; /* STD_COM_FLAGS */
- s.iomem_base = (u8*)VR4181_SIURB;
- s.iomem_reg_shift = 0;
- s.io_type = SERIAL_IO_MEM;
- if (early_serial_setup(&s) != 0) {
- panic("vr4181_init_serial() failed!");
- }
-}
-
diff --git a/arch/mips/vr4181/common/time.c b/arch/mips/vr4181/common/time.c
deleted file mode 100644
index 17814076b6f..00000000000
--- a/arch/mips/vr4181/common/time.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * rtc and time ops for vr4181. Part of code is drived from
- * linux-vr, originally written by Bradley D. LaRonde & Michael Klar.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/param.h> /* for HZ */
-#include <linux/time.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/time.h>
-
-#include <asm/vr4181/vr4181.h>
-
-#define COUNTS_PER_JIFFY ((32768 + HZ/2) / HZ)
-
-/*
- * RTC ops
- */
-
-DEFINE_SPINLOCK(rtc_lock);
-
-/* per VR41xx docs, bad data can be read if between 2 counts */
-static inline unsigned short
-read_time_reg(volatile unsigned short *reg)
-{
- unsigned short value;
- do {
- value = *reg;
- barrier();
- } while (value != *reg);
- return value;
-}
-
-static unsigned long
-vr4181_rtc_get_time(void)
-{
- unsigned short regh, regm, regl;
-
- // why this crazy order, you ask? to guarantee that neither m
- // nor l wrap before all 3 read
- do {
- regm = read_time_reg(VR4181_ETIMEMREG);
- barrier();
- regh = read_time_reg(VR4181_ETIMEHREG);
- barrier();
- regl = read_time_reg(VR4181_ETIMELREG);
- } while (regm != read_time_reg(VR4181_ETIMEMREG));
- return ((regh << 17) | (regm << 1) | (regl >> 15));
-}
-
-static int
-vr4181_rtc_set_time(unsigned long timeval)
-{
- unsigned short intreg;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- intreg = *VR4181_RTCINTREG & 0x05;
- barrier();
- *VR4181_ETIMELREG = timeval << 15;
- *VR4181_ETIMEMREG = timeval >> 1;
- *VR4181_ETIMEHREG = timeval >> 17;
- barrier();
- // assume that any ints that just triggered are invalid, since the
- // time value is written non-atomically in 3 separate regs
- *VR4181_RTCINTREG = 0x05 ^ intreg;
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return 0;
-}
-
-
-/*
- * timer interrupt routine (wrapper)
- *
- * we need our own interrupt routine because we need to clear
- * RTC1 interrupt.
- */
-static void
-vr4181_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- /* Clear the interrupt. */
- *VR4181_RTCINTREG = 0x2;
-
- /* call the generic one */
- timer_interrupt(irq, dev_id, regs);
-}
-
-
-/*
- * vr4181_time_init:
- *
- * We pick the following choices:
- * . we use elapsed timer as the RTC. We set some reasonable init data since
- * it does not persist across reset
- * . we use RTC1 as the system timer interrupt source.
- * . we use CPU counter for fast_gettimeoffset and we calivrate the cpu
- * frequency. In other words, we use calibrate_div64_gettimeoffset().
- * . we use our own timer interrupt routine which clears the interrupt
- * and then calls the generic high-level timer interrupt routine.
- *
- */
-
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-
-static void
-vr4181_timer_setup(struct irqaction *irq)
-{
- /* over-write the handler to be our own one */
- irq->handler = vr4181_timer_interrupt;
-
- /* sets up the frequency */
- *VR4181_RTCL1LREG = COUNTS_PER_JIFFY;
- *VR4181_RTCL1HREG = 0;
-
- /* and ack any pending ints */
- *VR4181_RTCINTREG = 0x2;
-
- /* setup irqaction */
- setup_irq(VR4181_IRQ_INT1, irq);
-
-}
-
-void
-vr4181_init_time(void)
-{
- /* setup hookup functions */
- rtc_get_time = vr4181_rtc_get_time;
- rtc_set_time = vr4181_rtc_set_time;
-
- board_timer_setup = vr4181_timer_setup;
-}
-
diff --git a/arch/mips/vr4181/osprey/Makefile b/arch/mips/vr4181/osprey/Makefile
deleted file mode 100644
index 34be0579088..00000000000
--- a/arch/mips/vr4181/osprey/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for common code of NEC Osprey board
-#
-
-obj-y := setup.o prom.o reset.o
-
-obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/vr4181/osprey/dbg_io.c b/arch/mips/vr4181/osprey/dbg_io.c
deleted file mode 100644
index 5e8a84072d5..00000000000
--- a/arch/mips/vr4181/osprey/dbg_io.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * kgdb io functions for osprey. We use the serial port on debug board.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/* ======================= CONFIG ======================== */
-
-/* [jsun] we use the second serial port for kdb */
-#define BASE 0xb7fffff0
-#define MAX_BAUD 115200
-
-/* distance in bytes between two serial registers */
-#define REG_OFFSET 1
-
-/*
- * 0 - kgdb does serial init
- * 1 - kgdb skip serial init
- */
-static int remoteDebugInitialized = 1;
-
-/*
- * the default baud rate *if* kgdb does serial init
- */
-#define BAUD_DEFAULT UART16550_BAUD_38400
-
-/* ======================= END OF CONFIG ======================== */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-/* register offset */
-#define OFS_RCV_BUFFER 0
-#define OFS_TRANS_HOLD 0
-#define OFS_SEND_BUFFER 0
-#define OFS_INTR_ENABLE (1*REG_OFFSET)
-#define OFS_INTR_ID (2*REG_OFFSET)
-#define OFS_DATA_FORMAT (3*REG_OFFSET)
-#define OFS_LINE_CONTROL (3*REG_OFFSET)
-#define OFS_MODEM_CONTROL (4*REG_OFFSET)
-#define OFS_RS232_OUTPUT (4*REG_OFFSET)
-#define OFS_LINE_STATUS (5*REG_OFFSET)
-#define OFS_MODEM_STATUS (6*REG_OFFSET)
-#define OFS_RS232_INPUT (6*REG_OFFSET)
-#define OFS_SCRATCH_PAD (7*REG_OFFSET)
-
-#define OFS_DIVISOR_LSB (0*REG_OFFSET)
-#define OFS_DIVISOR_MSB (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
-#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
- /* disable interrupts */
- UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
- /* set up buad rate */
- {
- uint32 divisor;
-
- /* set DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
- /* set divisor */
- divisor = MAX_BAUD / baud;
- UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
- UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
- /* clear DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
- }
-
- /* set data format */
- UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-
-uint8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(BAUD_DEFAULT,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
- return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(BAUD_DEFAULT,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
- UART16550_WRITE(OFS_SEND_BUFFER, byte);
- return 1;
-}
diff --git a/arch/mips/vr4181/osprey/prom.c b/arch/mips/vr4181/osprey/prom.c
deleted file mode 100644
index af0d1456161..00000000000
--- a/arch/mips/vr4181/osprey/prom.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/vr4181/osprey/prom.c
- * prom code for osprey.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-const char *get_system_type(void)
-{
- return "NEC_Vr41xx Osprey";
-}
-
-/*
- * [jsun] right now we assume it is the nec debug monitor, which does
- * not pass any arguments.
- */
-void __init prom_init(void)
-{
- // cmdline is now set in default config
- // strcpy(arcs_cmdline, "ip=bootp ");
- // strcat(arcs_cmdline, "ether=46,0x03fe0300,eth0 ");
- // strcpy(arcs_cmdline, "ether=0,0x0300,eth0 "
- // strcat(arcs_cmdline, "video=vr4181fb:xres:240,yres:320,bpp:8 ");
-
- mips_machgroup = MACH_GROUP_NEC_VR41XX;
- mips_machtype = MACH_NEC_OSPREY;
-
- /* 16MB fixed */
- add_memory_region(0, 16 << 20, BOOT_MEM_RAM);
-}
-
-unsigned long __init prom_free_prom_memory(void)
-{
- return 0;
-}
diff --git a/arch/mips/vr4181/osprey/reset.c b/arch/mips/vr4181/osprey/reset.c
deleted file mode 100644
index 036ae83d89d..00000000000
--- a/arch/mips/vr4181/osprey/reset.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-
-void nec_osprey_restart(char *command)
-{
- set_c0_status(ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void nec_osprey_halt(void)
-{
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-void nec_osprey_power_off(void)
-{
- nec_osprey_halt();
-}
diff --git a/arch/mips/vr4181/osprey/setup.c b/arch/mips/vr4181/osprey/setup.c
deleted file mode 100644
index 2ff7140e7ed..00000000000
--- a/arch/mips/vr4181/osprey/setup.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/arch/mips/vr4181/setup.c
- *
- * VR41xx setup routines
- *
- * Copyright (C) 1999 Bradley D. LaRonde
- * Copyright (C) 1999, 2000 Michael Klar
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/reboot.h>
-#include <asm/vr4181/vr4181.h>
-#include <asm/io.h>
-
-
-extern void nec_osprey_restart(char* c);
-extern void nec_osprey_halt(void);
-extern void nec_osprey_power_off(void);
-
-extern void vr4181_init_serial(void);
-extern void vr4181_init_time(void);
-
-static void __init nec_osprey_setup(void)
-{
- set_io_port_base(VR4181_PORT_BASE);
- isa_slot_offset = VR4181_ISAMEM_BASE;
-
- vr4181_init_serial();
- vr4181_init_time();
-
- _machine_restart = nec_osprey_restart;
- _machine_halt = nec_osprey_halt;
- _machine_power_off = nec_osprey_power_off;
-
- /* setup resource limit */
- ioport_resource.end = 0xffffffff;
- iomem_resource.end = 0xffffffff;
-
- /* [jsun] hack */
- /*
- printk("[jsun] hack to change external ISA control register, %x -> %x\n",
- (*VR4181_XISACTL),
- (*VR4181_XISACTL) | 0x2);
- *VR4181_XISACTL |= 0x2;
- */
-
- // *VR4181_GPHIBSTH = 0x2000;
- // *VR4181_GPMD0REG = 0x00c0;
- // *VR4181_GPINTEN = 1<<6;
-
- /* [jsun] I believe this will get the interrupt type right
- * for the ether port.
- */
- *VR4181_GPINTTYPL = 0x3000;
-}
-
-early_initcall(nec_osprey_setup);