aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/head_32.S
diff options
context:
space:
mode:
authorDavid Gibson <david@gibson.dropbear.id.au>2007-06-13 14:52:54 +1000
committerPaul Mackerras <paulus@samba.org>2007-06-14 22:30:15 +1000
commitf21f49ea639ac3f24824177dac1268af75a2d373 (patch)
tree2750cea49f8ffe275b4cf321a788890e50b2cf75 /arch/powerpc/kernel/head_32.S
parent90ac19a8b21ba2621ddd7beb2dc96152e78270b7 (diff)
[POWERPC] Remove the dregs of APUS support from arch/powerpc
APUS (the Amiga Power-Up System) is not supported under arch/powerpc and it's unlikely it ever will be. Therefore, this patch removes the fragments of APUS support code from arch/powerpc which have been copied from arch/ppc. A few APUS references are left in asm-powerpc in .h files which are still used from arch/ppc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/kernel/head_32.S')
-rw-r--r--arch/powerpc/kernel/head_32.S122
1 files changed, 3 insertions, 119 deletions
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index c897203198b..7d73a13450b 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -9,7 +9,6 @@
* rewritten by Paul Mackerras.
* Copyright (C) 1996 Paul Mackerras.
* MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
*
* This file contains the low-level support and setup for the
* PowerPC platform, including trap and interrupt dispatch.
@@ -32,10 +31,6 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
-#ifdef CONFIG_APUS
-#include <asm/amigappc.h>
-#endif
-
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
/* see the comment for clear_bats() -- Cort */ \
@@ -92,11 +87,6 @@ _start:
* r4: virtual address of boot_infos_t
* r5: 0
*
- * APUS
- * r3: 'APUS'
- * r4: physical address of memory base
- * Linux/m68k style BootInfo structure at &_end.
- *
* PREP
* This is jumped to on prep systems right after the kernel is relocated
* to its proper place in memory by the boot loader. The expected layout
@@ -150,14 +140,6 @@ __start:
*/
bl early_init
-#ifdef CONFIG_APUS
-/* On APUS the __va/__pa constants need to be set to the correct
- * values before continuing.
- */
- mr r4,r30
- bl fix_mem_constants
-#endif /* CONFIG_APUS */
-
/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
* the physical address we are running at, returned by early_init()
*/
@@ -167,7 +149,7 @@ __after_mmu_off:
bl flush_tlbs
bl initial_bats
-#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+#if defined(CONFIG_BOOTX_TEXT)
bl setup_disp_bat
#endif
@@ -183,7 +165,6 @@ __after_mmu_off:
#endif /* CONFIG_6xx */
-#ifndef CONFIG_APUS
/*
* We need to run with _start at physical address 0.
* On CHRP, we are loaded at 0x10000 since OF on CHRP uses
@@ -196,7 +177,6 @@ __after_mmu_off:
addis r4,r3,KERNELBASE@h /* current address of _start */
cmpwi 0,r4,0 /* are we already running at 0? */
bne relocate_kernel
-#endif /* CONFIG_APUS */
/*
* we now have the 1st 16M of ram mapped with the bats.
* prep needs the mmu to be turned on here, but pmac already has it on.
@@ -881,85 +861,6 @@ _GLOBAL(copy_and_flush)
addi r6,r6,4
blr
-#ifdef CONFIG_APUS
-/*
- * On APUS the physical base address of the kernel is not known at compile
- * time, which means the __pa/__va constants used are incorrect. In the
- * __init section is recorded the virtual addresses of instructions using
- * these constants, so all that has to be done is fix these before
- * continuing the kernel boot.
- *
- * r4 = The physical address of the kernel base.
- */
-fix_mem_constants:
- mr r10,r4
- addis r10,r10,-KERNELBASE@h /* virt_to_phys constant */
- neg r11,r10 /* phys_to_virt constant */
-
- lis r12,__vtop_table_begin@h
- ori r12,r12,__vtop_table_begin@l
- add r12,r12,r10 /* table begin phys address */
- lis r13,__vtop_table_end@h
- ori r13,r13,__vtop_table_end@l
- add r13,r13,r10 /* table end phys address */
- subi r12,r12,4
- subi r13,r13,4
-1: lwzu r14,4(r12) /* virt address of instruction */
- add r14,r14,r10 /* phys address of instruction */
- lwz r15,0(r14) /* instruction, now insert top */
- rlwimi r15,r10,16,16,31 /* half of vp const in low half */
- stw r15,0(r14) /* of instruction and restore. */
- dcbst r0,r14 /* write it to memory */
- sync
- icbi r0,r14 /* flush the icache line */
- cmpw r12,r13
- bne 1b
- sync /* additional sync needed on g4 */
- isync
-
-/*
- * Map the memory where the exception handlers will
- * be copied to when hash constants have been patched.
- */
-#ifdef CONFIG_APUS_FAST_EXCEPT
- lis r8,0xfff0
-#else
- lis r8,0
-#endif
- ori r8,r8,0x2 /* 128KB, supervisor */
- mtspr SPRN_DBAT3U,r8
- mtspr SPRN_DBAT3L,r8
-
- lis r12,__ptov_table_begin@h
- ori r12,r12,__ptov_table_begin@l
- add r12,r12,r10 /* table begin phys address */
- lis r13,__ptov_table_end@h
- ori r13,r13,__ptov_table_end@l
- add r13,r13,r10 /* table end phys address */
- subi r12,r12,4
- subi r13,r13,4
-1: lwzu r14,4(r12) /* virt address of instruction */
- add r14,r14,r10 /* phys address of instruction */
- lwz r15,0(r14) /* instruction, now insert top */
- rlwimi r15,r11,16,16,31 /* half of pv const in low half*/
- stw r15,0(r14) /* of instruction and restore. */
- dcbst r0,r14 /* write it to memory */
- sync
- icbi r0,r14 /* flush the icache line */
- cmpw r12,r13
- bne 1b
-
- sync /* additional sync needed on g4 */
- isync /* No speculative loading until now */
- blr
-
-/***********************************************************************
- * Please note that on APUS the exception handlers are located at the
- * physical address 0xfff0000. For this reason, the exception handlers
- * cannot use relative branches to access the code below.
- ***********************************************************************/
-#endif /* CONFIG_APUS */
-
#ifdef CONFIG_SMP
#ifdef CONFIG_GEMINI
.globl __secondary_start_gemini
@@ -1135,19 +1036,6 @@ start_here:
bl __save_cpu_setup
bl MMU_init
-#ifdef CONFIG_APUS
- /* Copy exception code to exception vector base on APUS. */
- lis r4,KERNELBASE@h
-#ifdef CONFIG_APUS_FAST_EXCEPT
- lis r3,0xfff0 /* Copy to 0xfff00000 */
-#else
- lis r3,0 /* Copy to 0x00000000 */
-#endif
- li r5,0x4000 /* # bytes of memory to copy */
- li r6,0
- bl copy_and_flush /* copy the first 0x4000 bytes */
-#endif /* CONFIG_APUS */
-
/*
* Go back to running unmapped so we can load up new values
* for SDR1 (hash table pointer) and the segment registers
@@ -1324,11 +1212,7 @@ initial_bats:
#else
ori r8,r8,2 /* R/W access */
#endif /* CONFIG_SMP */
-#ifdef CONFIG_APUS
- ori r11,r11,BL_8M<<2|0x2 /* set up 8MB BAT registers for 604 */
-#else
ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
-#endif /* CONFIG_APUS */
mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
@@ -1338,7 +1222,7 @@ initial_bats:
blr
-#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+#ifdef CONFIG_BOOTX_TEXT
setup_disp_bat:
/*
* setup the display bat prepared for us in prom.c
@@ -1362,7 +1246,7 @@ setup_disp_bat:
1: mtspr SPRN_IBAT3L,r8
mtspr SPRN_IBAT3U,r11
blr
-#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
+#endif /* CONFIG_BOOTX_TEXT */
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.