Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.

5 files changed, 235 insertions, 53 deletions

diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 685b2fbbbe0..21d113536b8 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -11,6 +11,12 @@ config MPC8641_HPCN
 	help
 	  This option enables support for the MPC8641 HPCN board.
 
+config MPC8610_HPCD
+	bool "Freescale MPC8610 HPCD"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC8610 HPCD board.
+
 endchoice
 
 config MPC8641
@@ -19,3 +25,10 @@ config MPC8641
 	select PPC_UDBG_16550
 	select MPIC
 	default y if MPC8641_HPCN
+
+config MPC8610
+	bool
+	select FSL_PCI if PCI
+	select PPC_UDBG_16550
+	select MPIC
+	default y if MPC8610_HPCD
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 3376c7767f2..c96706327ea 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
+obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
new file mode 100644
index 00000000000..6390895e5e9
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -0,0 +1,216 @@
+/*
+ * MPC8610 HPCD board specific routines
+ *
+ * Initial author: Xianghua Xiao <x.xiao@freescale.com>
+ * Recode: Jason Jin <jason.jin@freescale.com>
+ *
+ * Rewrite the interrupt routing. remove the 8259PIC support,
+ * All the integrated device in ULI use sideband interrupt.
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+void __init
+mpc86xx_hpcd_init_irq(void)
+{
+	struct mpic *mpic1;
+	struct device_node *np;
+	struct resource res;
+
+	/* Determine PIC address. */
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL)
+		return;
+	of_address_to_resource(np, 0, &res);
+
+	/* Alloc mpic structure and per isu has 16 INT entries. */
+	mpic1 = mpic_alloc(np, res.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			0, 256, " MPIC     ");
+	BUG_ON(mpic1 == NULL);
+
+	mpic_init(mpic1);
+}
+
+#ifdef CONFIG_PCI
+static void __devinit quirk_uli1575(struct pci_dev *dev)
+{
+	u32 temp32;
+
+	/* Disable INTx */
+	pci_read_config_dword(dev, 0x48, &temp32);
+	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+	/* Enable sideband interrupt */
+	pci_read_config_dword(dev, 0x90, &temp32);
+	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+	unsigned short temp;
+
+	/* Interrupt Disable, Needed when SATA disabled */
+	pci_read_config_word(dev, PCI_COMMAND, &temp);
+	temp |= 1<<10;
+	pci_write_config_word(dev, PCI_COMMAND, temp);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c |= 0x80;
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c &= 0x7f;
+	pci_write_config_byte(dev, 0x83, c);
+}
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned char c;
+
+	pci_read_config_byte(dev, 0x4b, &c);
+	c |= 0x10;
+	pci_write_config_byte(dev, 0x4b, c);
+}
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit final_uli5288(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct device_node *hosenode = hose ? hose->arch_data : NULL;
+	struct of_irq oirq;
+	int virq, pin = 2;
+	u32 laddr[3];
+
+	if (!hosenode)
+		return;
+
+	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+	laddr[1] = laddr[2] = 0;
+	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+				     oirq.size);
+	dev->irq = virq;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
+#endif /* CONFIG_PCI */
+
+static void __init
+mpc86xx_hpcd_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+	if (ppc_md.progress)
+		ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8610-pci")
+		    || of_device_is_compatible(np, "fsl,mpc8641-pcie")) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == 0xa000)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+		}
+        }
+#endif
+
+	printk("MPC86xx HPCD board from Freescale Semiconductor\n");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc86xx_hpcd_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,MPC8610HPCD"))
+		return 1;	/* Looks good */
+
+	return 0;
+}
+
+long __init
+mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	asm volatile("isync");
+
+	return 0;
+}
+
+define_machine(mpc86xx_hpcd) {
+	.name			= "MPC86xx HPCD",
+	.probe			= mpc86xx_hpcd_probe,
+	.setup_arch		= mpc86xx_hpcd_setup_arch,
+	.init_IRQ		= mpc86xx_hpcd_init_irq,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.time_init		= mpc86xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+};
diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
deleted file mode 100644
index 41e554c4af9..00000000000
--- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * MPC8641 HPCN board definitions
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Author: Xianghua Xiao <x.xiao@freescale.com>
- */
-
-#ifndef __MPC8641_HPCN_H__
-#define __MPC8641_HPCN_H__
-
-#include <linux/init.h>
-
-#define MPC86XX_RSTCR_OFFSET	(0xe00b0)	/* Reset Control Register */
-
-#endif	/* __MPC8641_HPCN_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 47aafa76c93..32a531aebcb 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -35,7 +35,6 @@
 #include <sysdev/fsl_soc.h>
 
 #include "mpc86xx.h"
-#include "mpc8641_hpcn.h"
 
 #undef DEBUG
 
@@ -132,25 +131,15 @@ static int mpc86xx_exclude_device(struct pci_controller *hose,
 static void __init
 mpc86xx_hpcn_setup_arch(void)
 {
+#ifdef CONFIG_PCI
 	struct device_node *np;
+#endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
 
-	np = of_find_node_by_type(NULL, "cpu");
-	if (np != 0) {
-		const unsigned int *fp;
-
-		fp = of_get_property(np, "clock-frequency", NULL);
-		if (fp != 0)
-			loops_per_jiffy = *fp / HZ;
-		else
-			loops_per_jiffy = 50000000 / HZ;
-		of_node_put(np);
-	}
-
 #ifdef CONFIG_PCI
-	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
+	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
 		struct resource rsrc;
 		of_address_to_resource(np, 0, &rsrc);
 		if ((rsrc.start & 0xfffff) == 0x8000)
@@ -158,6 +147,7 @@ mpc86xx_hpcn_setup_arch(void)
 		else
 			fsl_add_bridge(np, 0);
 	}
+
 	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 
@@ -205,23 +195,6 @@ static int __init mpc86xx_hpcn_probe(void)
 	return 0;
 }
 
-
-void
-mpc86xx_restart(char *cmd)
-{
-	void __iomem *rstcr;
-
-	rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100);
-
-	local_irq_disable();
-
-	/* Assert reset request to Reset Control Register */
-	out_be32(rstcr, 0x2);
-
-	/* not reached */
-}
-
-
 long __init
 mpc86xx_time_init(void)
 {
@@ -246,7 +219,7 @@ define_machine(mpc86xx_hpcn) {
 	.init_IRQ		= mpc86xx_hpcn_init_irq,
 	.show_cpuinfo		= mpc86xx_hpcn_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
-	.restart		= mpc86xx_restart,
+	.restart		= fsl_rstcr_restart,
 	.time_init		= mpc86xx_time_init,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,