aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@ru.mvista.com>2008-12-18 19:37:31 +0300
committerKumar Gala <galak@kernel.crashing.org>2008-12-30 11:13:46 -0600
commitc9c5e52d44b3e68effcda4bef4ff23c6be0c001c (patch)
treeeb818535df87c6138f62a0aaf7cacd2a7b59229f /arch/powerpc/platforms
parent3d64de9c50619d32eb71d993d23a50b98d12d3c0 (diff)
powerpc/83xx: Add USB Host/Gadget support for MPC8360E-MDS boards
- Update the device tree per QE USB bindings; - Add timer (FSL GTM) node; - Add gpio-controller node for BCSR13 bank (GPIOs on that bank are used to control the USB transceiver); - Set up other BCSR registers; - Configure the QE Par IO. The work is loosely based on Li Yang's patch[1], which was used to support peripheral mode only. [1] http://ozlabs.org/pipermail/linuxppc-dev/2008-August/061357.html The s-o-b line of the original patch preserved here. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_mds.c75
1 files changed, 75 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index c0a09c34956..09e9d6fb741 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -44,6 +44,7 @@
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
@@ -93,6 +94,16 @@ static void __init mpc836x_mds_setup_arch(void)
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
par_io_of_config(np);
+#ifdef CONFIG_QE_USB
+ /* Must fixup Par IO before QE GPIO chips are registered. */
+ par_io_config_pin(1, 2, 1, 0, 3, 0); /* USBOE */
+ par_io_config_pin(1, 3, 1, 0, 3, 0); /* USBTP */
+ par_io_config_pin(1, 8, 1, 0, 1, 0); /* USBTN */
+ par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
+ par_io_config_pin(1, 9, 2, 1, 3, 0); /* USBRP */
+ par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN */
+ par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21 */
+#endif /* CONFIG_QE_USB */
}
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
@@ -151,6 +162,70 @@ static int __init mpc836x_declare_of_platform_devices(void)
}
machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
+#ifdef CONFIG_QE_USB
+static int __init mpc836x_usb_cfg(void)
+{
+ u8 __iomem *bcsr;
+ struct device_node *np;
+ const char *mode;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
+ if (!np)
+ return -ENODEV;
+
+ bcsr = of_iomap(np, 0);
+ of_node_put(np);
+ if (!bcsr)
+ return -ENOMEM;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
+ if (!np) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+#define BCSR8_TSEC1M_MASK (0x3 << 6)
+#define BCSR8_TSEC1M_RGMII (0x0 << 6)
+#define BCSR8_TSEC2M_MASK (0x3 << 4)
+#define BCSR8_TSEC2M_RGMII (0x0 << 4)
+ /*
+ * Default is GMII (2), but we should set it to RGMII (0) if we use
+ * USB (Eth PHY is in RGMII mode anyway).
+ */
+ clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
+ BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
+
+#define BCSR13_USBMASK 0x0f
+#define BCSR13_nUSBEN 0x08 /* 1 - Disable, 0 - Enable */
+#define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low */
+#define BCSR13_USBMODE 0x02 /* 1 - Host, 0 - Function */
+#define BCSR13_nUSBVCC 0x01 /* 1 - gets VBUS, 0 - supplies VBUS */
+
+ clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
+
+ mode = of_get_property(np, "mode", NULL);
+ if (mode && !strcmp(mode, "peripheral")) {
+ setbits8(&bcsr[13], BCSR13_nUSBVCC);
+ qe_usb_clock_set(QE_CLK21, 48000000);
+ } else {
+ setbits8(&bcsr[13], BCSR13_USBMODE);
+ /*
+ * The BCSR GPIOs are used to control power and
+ * speed of the USB transceiver. This is needed for
+ * the USB Host only.
+ */
+ simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
+ }
+
+ of_node_put(np);
+err:
+ iounmap(bcsr);
+ return ret;
+}
+machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
+#endif /* CONFIG_QE_USB */
+
static void __init mpc836x_mds_init_IRQ(void)
{
struct device_node *np;