powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 1186 deletions

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
deleted file mode 100644
index 0f1863ed9c1..00000000000
--- a/arch/ppc/Kconfig
+++ /dev/null
@@ -1,1186 +0,0 @@
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux/PowerPC Kernel Configuration"
-
-config WORD_SIZE
-	int
-	default 32
-
-config MMU
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config PPC
-	bool
-	default y
-	select HAVE_IDE
-	select HAVE_OPROFILE
-	select HAVE_KPROBES
-
-config PPC32
-	bool
-	default y
-
-# All PPCs use generic nvram driver through ppc_md
-config GENERIC_NVRAM
-	bool
-	default y
-
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-
-config SCHED_NO_NO_OMIT_FRAME_POINTER
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
-config GENERIC_BUG
-	bool
-	default y
-	depends on BUG
-
-source "init/Kconfig"
-
-menu "Processor"
-
-choice
-	prompt "Processor Type"
-	default 6xx
-
-config 6xx
-	bool "6xx/7xx/74xx/52xx/82xx"
-	select PPC_FPU
-	help
-	  There are four types of PowerPC chips supported.  The more common
-	  types (601, 603, 604, 740, 750, 7400), the older Freescale
-	  (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
-	  52xx, 82xx), the IBM embedded versions (403 and 405) and
-	  the Book E embedded processors from IBM (44x) and Freescale (85xx).
-	  For support for 64-bit processors, set ARCH=powerpc.
-	  Unless you are building a kernel for one of the embedded processor
-	  systems, choose 6xx.
-	  Also note that because the 52xx, 82xx family have a 603e
-	  core, specific support for that chipset is asked later on.
-
-config 40x
-	bool "40x"
-	select PPC_DCR_NATIVE
-
-config 44x
-	bool "44x"
-	select PPC_DCR_NATIVE
-
-config 8xx
-	bool "8xx"
-	select PPC_LIB_RHEAP
-
-endchoice
-
-config PPC_FPU
-	bool
-
-config PPC_DCR_NATIVE
-	bool
-	default n
-
-config PPC_DCR
-	bool
-	depends on PPC_DCR_NATIVE
-	default y
-
-config PTE_64BIT
-	bool
-	depends on 44x
-	default y if 44x
-
-config PHYS_64BIT
-	bool
-	depends on 44x
-	default y if 44x
-	---help---
-	  This option enables kernel support for larger than 32-bit physical
-	  addresses.  This features is not be available on all e500 cores.
-
-	  If in doubt, say N here.
-
-config ALTIVEC
-	bool "AltiVec Support"
-	depends on 6xx
-	depends on !8260
-	---help---
-	  This option enables kernel support for the Altivec extensions to the
-	  PowerPC processor. The kernel currently supports saving and restoring
-	  altivec registers, and turning on the 'altivec enable' bit so user
-	  processes can execute altivec instructions.
-
-	  This option is only usefully if you have a processor that supports
-	  altivec (G4, otherwise known as 74xx series), but does not have
-	  any affect on a non-altivec cpu (it does, however add code to the
-	  kernel).
-
-	  If in doubt, say Y here.
-
-config TAU
-	bool "Thermal Management Support"
-	depends on 6xx && !8260
-	help
-	  G3 and G4 processors have an on-chip temperature sensor called the
-	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
-	  temperature within 2-4 degrees Celsius. This option shows the current
-	  on-die temperature in /proc/cpuinfo if the cpu supports it.
-
-	  Unfortunately, on some chip revisions, this sensor is very inaccurate
-	  and in some cases, does not work at all, so don't assume the cpu
-	  temp is actually what /proc/cpuinfo says it is.
-
-config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
-	depends on TAU
-	---help---
-	  The TAU supports an interrupt driven mode which causes an interrupt
-	  whenever the temperature goes out of range. This is the fastest way
-	  to get notified the temp has exceeded a range. With this option off,
-	  a timer is used to re-check the temperature periodically.
-
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
-
-config TAU_AVERAGE
-	bool "Average high and low temp"
-	depends on TAU
-	---help---
-	  The TAU hardware can compare the temperature to an upper and lower
-	  bound.  The default behavior is to show both the upper and lower
-	  bound in /proc/cpuinfo. If the range is large, the temperature is
-	  either changing a lot, or the TAU hardware is broken (likely on some
-	  G4's). If the range is small (around 4 degrees), the temperature is
-	  relatively stable.  If you say Y here, a single temperature value,
-	  halfway between the upper and lower bounds, will be reported in
-	  /proc/cpuinfo.
-
-	  If in doubt, say N here.
-
-config MATH_EMULATION
-	bool "Math emulation"
-	depends on 4xx || 8xx
-	---help---
-	  Some PowerPC chips designed for embedded applications do not have
-	  a floating-point unit and therefore do not implement the
-	  floating-point instructions in the PowerPC instruction set.  If you
-	  say Y here, the kernel will include code to emulate a floating-point
-	  unit, which will allow programs that use floating-point
-	  instructions to run.
-
-	  If you have an Apple machine or an IBM RS/6000 or pSeries machine,
-	  or any machine with a 6xx, 7xx or 7xxx series processor, say N
-	  here.  Saying Y here will not hurt performance (on any machine) but
-	  will increase the size of the kernel.
-
-config KEXEC
-	bool "kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  The name comes from the similarity to the exec system call.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
-
-	  In the GameCube implementation, kexec allows you to load and
-	  run DOL files, including kernel and homebrew DOLs.
-
-source "drivers/cpufreq/Kconfig"
-
-config PPC601_SYNC_FIX
-	bool "Workarounds for PPC601 bugs"
-	depends on 6xx && PPC_PREP
-	help
-	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
-	  mean that extra synchronization instructions are required near
-	  certain instructions, typically those that make major changes to the
-	  CPU state.  These extra instructions reduce performance slightly.
-	  If you say N here, these extra instructions will not be included,
-	  resulting in a kernel which will run faster but may not run at all
-	  on some systems with the PPC601 chip.
-
-	  If in doubt, say Y here.
-
-source arch/ppc/platforms/4xx/Kconfig
-
-config PPC_STD_MMU
-	bool
-	depends on 6xx
-	default y
-
-config NOT_COHERENT_CACHE
-	bool
-	depends on 4xx || 8xx
-	default y
-
-endmenu
-
-menu "Platform options"
-
-config FADS
-	bool
-
-choice
-	prompt "8xx Machine Type"
-	depends on 8xx
-	default RPXLITE
-
-config RPXLITE
-	bool "RPX-Lite"
-	---help---
-	  Single-board computers based around the PowerPC MPC8xx chips and
-	  intended for embedded applications.  The following types are
-	  supported:
-
-	  RPX-Lite:
-	  Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
-
-	  RPX-Classic:
-	  Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
-	  the MPC 860
-
-	  BSE-IP:
-	  Bright Star Engineering ip-Engine.
-
-	  TQM823L:
-	  TQM850L:
-	  TQM855L:
-	  TQM860L:
-	  MPC8xx based family of mini modules, half credit card size,
-	  up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
-	  2 x CAN bus interface, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: October (?) 1999
-	  End of Life: not yet :-)
-	  URL:
-	  - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
-	  - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
-	  - images: <http://www.denx.de/embedded-ppc-en.html>
-
-	  FPS850L:
-	  FingerPrint Sensor System (based on TQM850L)
-	  Manufacturer: IKENDI AG, <http://www.ikendi.com/>
-	  Date of Release: November 1999
-	  End of life: end 2000 ?
-	  URL: see TQM850L
-
-	  IVMS8:
-	  MPC860 based board used in the "Integrated Voice Mail System",
-	  Small Version (8 voice channels)
-	  Manufacturer: Speech Design, <http://www.speech-design.de/>
-	  Date of Release: December 2000 (?)
-	  End of life: -
-	  URL: <http://www.speech-design.de/>
-
-	  IVML24:
-	  MPC860 based board used in the "Integrated Voice Mail System",
-	  Large Version (24 voice channels)
-	  Manufacturer: Speech Design, <http://www.speech-design.de/>
-	  Date of Release: March 2001  (?)
-	  End of life: -
-	  URL: <http://www.speech-design.de/>
-
-	  HERMES:
-	  Hermes-Pro ISDN/LAN router with integrated 8 x hub
-	  Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
-	  <http://www.multidata.de/>
-	  Date of Release: 2000 (?)
-	  End of life: -
-	  URL: <http://www.multidata.de/english/products/hpro.htm>
-
-	  IP860:
-	  VMEBus IP (Industry Pack) carrier board with MPC860
-	  Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-	  Date of Release: ?
-	  End of life: -
-	  URL: <http://www.microsys.de/html/ip860.html>
-
-	  PCU_E:
-	  PCU = Peripheral Controller Unit, Extended
-	  Manufacturer: Siemens AG, ICN (Information and Communication Networks)
-	  	<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
-	  Date of Release: April 2001
-	  End of life: August 2001
-	  URL: n. a.
-
-config RPXCLASSIC
-	bool "RPX-Classic"
-	help
-	  The RPX-Classic is a single-board computer based on the Motorola
-	  MPC860.  It features 16MB of DRAM and a variable amount of flash,
-	  I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
-	  LEDs.  Variants with Ethernet ports exist.  Say Y here to support it
-	  directly.
-
-config BSEIP
-	bool "BSE-IP"
-	help
-	  Say Y here to support the Bright Star Engineering ipEngine SBC.
-	  This is a credit-card-sized device featuring a MPC823 processor,
-	  26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
-	  controller, and two RS232 ports.
-
-config MPC8XXFADS
-	bool "FADS"
-	select FADS
-
-config TQM823L
-	bool "TQM823L"
-	help
-	  Say Y here to support the TQM823L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM850L
-	bool "TQM850L"
-	help
-	  Say Y here to support the TQM850L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM855L
-	bool "TQM855L"
-	help
-	  Say Y here to support the TQM855L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM860L
-	bool "TQM860L"
-	help
-	  Say Y here to support the TQM860L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config FPS850L
-	bool "FPS850L"
-
-config IVMS8
-	bool "IVMS8"
-	help
-	  Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
-	  from Speech Design, released March 2001.  The manufacturer's website
-	  is at <http://www.speech-design.de/>.
-
-config IVML24
-	bool "IVML24"
-	help
-	  Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
-	  from Speech Design, released March 2001.  The manufacturer's website
-	  is at <http://www.speech-design.de/>.
-
-config HERMES_PRO
-	bool "HERMES"
-
-config IP860
-	bool "IP860"
-
-config LWMON
-	bool "LWMON"
-
-config PCU_E
-	bool "PCU_E"
-
-config CCM
-	bool "CCM"
-
-config LANTEC
-	bool "LANTEC"
-
-config MBX
-	bool "MBX"
-	help
-	  MBX is a line of Motorola single-board computer based around the
-	  MPC821 and MPC860 processors, and intended for embedded-controller
-	  applications.  Say Y here to support these boards directly.
-
-config WINCEPT
-	bool "WinCept"
-	help
-	  The Wincept 100/110 is a Motorola single-board computer based on the
-	  MPC821 PowerPC, introduced in 1998 and designed to be used in
-	  thin-client machines.  Say Y to support it directly.
-
-endchoice
-
-choice
-	prompt "Machine Type"
-	depends on 6xx
-	default PPC_PREP
-	---help---
-	  Linux currently supports several different kinds of PowerPC-based
-	  machines: Apple Power Macintoshes and clones (such as the Motorola
-	  Starmax series), PReP (PowerPC Reference Platform) machines (such
-	  as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
-	  and some IBM RS/6000 systems), CHRP (Common Hardware Reference
-	  Platform) machines (including all of the recent IBM RS/6000 and
-	  pSeries machines), and several embedded PowerPC systems containing
-	  4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
-	  default option is to build a kernel which works on PReP.
-
-	  Note that support for Apple and CHRP machines is now only available
-	  with ARCH=powerpc, and has been removed from this menu.  If you
-	  wish to build a kernel for an Apple or CHRP machine, exit this
-	  configuration process and re-run it with ARCH=powerpc.
-
-	  Select PReP if configuring for a PReP machine.
-
-config PPC_PREP
-	bool "PReP"
-
-config KATANA
-	bool "Artesyn-Katana"
-	help
-	  Select KATANA if configuring an Artesyn KATANA 750i or 3750
-	  cPCI board.
-
-config WILLOW
-	bool "Cogent-Willow"
-
-config CPCI690
-	bool "Force-CPCI690"
-	help
-	  Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
-	bool "Force-PowerPMC250"
-
-config CHESTNUT
-	bool "IBM 750FX Eval board or 750GX Eval board"
-	help
-	  Select CHESTNUT if configuring an IBM 750FX Eval Board or a
-	  IBM 750GX Eval board.
-
-config SPRUCE
-	bool "IBM-Spruce"
-	select PPC_INDIRECT_PCI
-
-config HDPU
-	bool "Sky-HDPU"
-	help
-	  Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
-	depends on HDPU
-	tristate "HDPU-Features"
-	help
-	  Select to enable HDPU enhanced features.
-
-config EV64260
-	bool "Marvell-EV64260BP"
-	help
-	  Select EV64260 if configuring a Marvell (formerly Galileo)
-	  EV64260BP Evaluation platform.
-
-config LOPEC
-	bool "Motorola-LoPEC"
-	select PPC_I8259
-
-config MVME5100
-	bool "Motorola-MVME5100"
-	select PPC_INDIRECT_PCI
-
-config PPLUS
-	bool "Motorola-PowerPlus"
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-
-config PRPMC750
-	bool "Motorola-PrPMC750"
-	select PPC_INDIRECT_PCI
-
-config PRPMC800
-	bool "Motorola-PrPMC800"
-	select PPC_INDIRECT_PCI
-
-config SANDPOINT
-	bool "Motorola-Sandpoint"
-	select PPC_I8259
-	help
-	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
-	  (any flavor).
-
-config RADSTONE_PPC7D
-	bool "Radstone Technology PPC7D board"
-	select PPC_I8259
-
-config PAL4
-	bool "SBS-Palomar4"
-
-config EST8260
-	bool "EST8260"
-	---help---
-	  The EST8260 is a single-board computer manufactured by Wind River
-	  Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
-	  the MPC8260.  Wind River Systems has a website at
-	  <http://www.windriver.com/>, but the EST8260 cannot be found on it
-	  and has probably been discontinued or rebadged.
-
-config SBC82xx
-	bool "SBC82xx"
-	---help---
-	  SBC PowerQUICC II, single-board computer with MPC82xx CPU
-	  Manufacturer: Wind River Systems, Inc.
-	  Date of Release: May 2003
-	  End of Life: -
-	  URL: <http://www.windriver.com/>
-
-config SBS8260
-	bool "SBS8260"
-
-config RPX8260
-	bool "RPXSUPER"
-
-config TQM8260
-	bool "TQM8260"
-	---help---
-	  MPC8260 based module, little larger than credit card,
-	  up to 128 MB global + 64 MB local RAM, 32 MB Flash,
-	  32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
-	  2 x serial ports, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: June 2001
-	  End of Life: not yet :-)
-	  URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config PQ2FADS
-	bool "Freescale-PQ2FADS"
-	help
-	  Select PQ2FADS if you wish to configure for a Freescale
-	  PQ2FADS board (-VR or -ZU).
-
-config LITE5200
-	bool "Freescale LITE5200 / (IceCube)"
-	select PPC_MPC52xx
-	help
-	  Support for the LITE5200 dev board for the MPC5200 from Freescale.
-	  This is for the LITE5200 version 2.0 board. Don't know if it changes
-	  much but it's only been tested on this board version. I think this
-	  board is also known as IceCube.
-
-config LITE5200B
-	bool "Freescale LITE5200B"
-	depends on LITE5200
-	help
-	  Support for the LITE5200B dev board for the MPC5200 from Freescale.
-	  This is the new board with 2 PCI slots.
-
-config EV64360
-	bool "Marvell-EV64360BP"
-	help
-	  Select EV64360 if configuring a Marvell EV64360BP Evaluation
-	  platform.
-endchoice
-
-config TQM8xxL
-	bool
-	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
-	default y
-
-config EMBEDDEDBOOT
-	bool
-	depends on 8xx || 8260
-	default y
-
-config PPC_MPC52xx
-	bool
-
-config 8260
-	bool "CPM2 Support" if WILLOW
-	depends on 6xx
-	default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
-	help
-	  The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
-	  this option means that you wish to build a kernel for a machine with
-	  an 8260 class CPU.
-
-config CPM1
-	bool
-	depends on 8xx
-	default y
-	help
-	  The CPM1 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM1 coprocessor
-	  on it (8xx, 827x, 8560).
-
-config CPM2
-	bool
-	depends on 8260 || MPC8560 || MPC8555
-	select PPC_LIB_RHEAP
-	default y
-	help
-	  The CPM2 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM2 coprocessor
-	  on it (826x, 827x, 8560).
-
-config PPC_GEN550
-	bool
-	depends on SANDPOINT || SPRUCE || PPLUS || \
-		PRPMC750 || PRPMC800 || LOPEC || \
-		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D
-	default y
-
-config FORCE
-	bool
-	depends on 6xx && POWERPMC250
-	default y
-
-config GT64260
-	bool
-	depends on EV64260 || CPCI690
-	default y
-
-config MV64360		# Really MV64360 & MV64460
-	bool
-	depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
-	default y
-
-config MV64X60
-	bool
-	depends on (GT64260 || MV64360)
-	select PPC_INDIRECT_PCI
-	default y
-
-config MV643XX_ETH_0
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
-	default y
-
-config MV643XX_ETH_1
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
-	default y
-
-config MV643XX_ETH_2
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
-	default y
-
-menu "Set bridge options"
-	depends on MV64X60
-
-config NOT_COHERENT_CACHE
-	bool "Turn off Cache Coherency"
-	default n
-	help
-	  Some 64x60 bridges lock up when trying to enforce cache coherency.
-	  When this option is selected, cache coherency will be turned off.
-	  Note that this can cause other problems (e.g., stale data being
-	  speculatively loaded via a cached mapping).  Use at your own risk.
-
-config MV64X60_BASE
-	hex "Set bridge base used by firmware"
-	default "0xf1000000"
-	help
-	  A firmware can leave the base address of the bridge's registers at
-	  a non-standard location.  If so, set this value to reflect the
-	  address of that non-standard location.
-
-config MV64X60_NEW_BASE
-	hex "Set bridge base used by kernel"
-	default "0xf1000000"
-	help
-	  If the current base address of the bridge's registers is not where
-	  you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
-	bool "Enable Non-Monarch Support"
-	depends on PRPMC800
-
-config HARRIER
-	bool
-	depends on PRPMC800
-	default y
-
-config EPIC_SERIAL_MODE
-	bool
-	depends on 6xx && (LOPEC || SANDPOINT)
-	default y
-
-config MPC10X_BRIDGE
-	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
-	select PPC_INDIRECT_PCI
-	default y
-
-config MPC10X_OPENPIC
-	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
-	default y
-
-config MPC10X_STORE_GATHERING
-	bool "Enable MPC10x store gathering"
-	depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
-	bool "Enable DUART mode on Sandpoint"
-	depends on SANDPOINT
-	help
-	  If this option is enabled then the MPC824x processor will run
-	  in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
-	bool "Enable Harrier store gathering"
-	depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
-	bool "MVME5100 configured with an IPMC761"
-	depends on MVME5100
-	select PPC_I8259
-
-config SPRUCE_BAUD_33M
-	bool "Spruce baud clock support"
-	depends on SPRUCE
-
-config PC_KEYBOARD
-	bool "PC PS/2 style Keyboard"
-	depends on 4xx || CPM2
-
-config PPCBUG_NVRAM
-	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
-	default y if PPC_PREP
-
-config SMP
-	depends on PPC_STD_MMU
-	bool "Symmetric multi-processing support"
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, say N. If you have a system with more
-	  than one CPU, say Y.  Note that the kernel does not currently
-	  support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
-	  since they have inadequate hardware support for multiprocessor
-	  operation.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on single-processor machines.
-	  On a single-processor machine, the kernel will run faster if you say
-	  N here.
-
-	  If you don't know what to do here, say N.
-
-config IRQ_ALL_CPUS
-	bool "Distribute interrupts on all CPUs by default"
-	depends on SMP && !MV64360
-	help
-	  This option gives the kernel permission to distribute IRQs across
-	  multiple CPUs.  Saying N here will route all IRQs to the first
-	  CPU.  Generally saying Y is safe, although some problems have been
-	  reported with SMP Power Macintoshes with this option enabled.
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "4"
-
-config HIGHMEM
-	bool "High memory support"
-
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
-source kernel/Kconfig.hz
-source kernel/Kconfig.preempt
-source "mm/Kconfig"
-
-source "fs/Kconfig.binfmt"
-
-config PREP_RESIDUAL
-	bool "Support for PReP Residual Data"
-	depends on PPC_PREP
-	help
-	  Some PReP systems have residual data passed to the kernel by the
-	  firmware.  This allows detection of memory size, devices present and
-	  other useful pieces of information.  Sometimes this information is
-	  not present or incorrect, in which case it could lead to the machine 
-	  behaving incorrectly.  If this happens, either disable PREP_RESIDUAL
-	  or pass the 'noresidual' option to the kernel.
-
-	  If you are running a PReP system, say Y here, otherwise say N.
-
-config PROC_PREPRESIDUAL
-	bool "Support for reading of PReP Residual Data in /proc"
-	depends on PREP_RESIDUAL && PROC_FS
-	help
-	  Enabling this option will create a /proc/residual file which allows
-	  you to get at the residual data on PReP systems.  You will need a tool
-	  (lsresidual) to parse it.  If you aren't on a PReP system, you don't
-	  want this.
-
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
-
-config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
-	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  most cases you will need to specify the root device here.
-
-if BROKEN
-source kernel/power/Kconfig
-endif
-
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
-endmenu
-
-config ISA_DMA_API
-	bool
-	default y
-
-menu "Bus options"
-
-config ISA
-	bool "Support for ISA-bus hardware"
-	depends on PPC_PREP
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have an Apple machine, say N here; if you
-	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
-	  you have an embedded board, consult your board documentation.
-
-config ZONE_DMA
-	bool
-	default y
-
-config GENERIC_ISA_DMA
-	bool
-	depends on 6xx && !CPM2
-	default y
-
-config PPC_I8259
-	bool
-	default y if PPC_PREP
-	default n
-
-config PPC_INDIRECT_PCI
-	bool
-	depends on PCI
-	default y if 40x || 44x || PPC_PREP
-	default n
-
-config EISA
-	bool
-	help
-	  The Extended Industry Standard Architecture (EISA) bus is a bus
-	  architecture used on some older intel-based PCs.
-
-config SBUS
-	bool
-
-# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
-config MCA
-	bool
-
-config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_MPC52xx
-	default y if !40x && !CPM2 && !8xx
-	default PCI_QSPAN if !4xx && !CPM2 && 8xx
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
-config PCI_DOMAINS
-	def_bool PCI
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config PCI_QSPAN
-	bool "QSpan PCI"
-	depends on !4xx && !CPM2 && 8xx
-	select PPC_I8259
-	help
-	  Say Y here if you have a system based on a Motorola 8xx-series
-	  embedded processor with a QSPAN PCI interface, otherwise say N.
-
-config PCI_8260
-	bool
-	depends on PCI && 8260
-	select PPC_INDIRECT_PCI
-	default y
-
-config 8260_PCI9
-	bool "Enable workaround for MPC826x erratum PCI 9"
-	depends on PCI_8260
-	default y
-
-choice
-	prompt "IDMA channel for PCI 9 workaround"
-	depends on 8260_PCI9
-
-config 8260_PCI9_IDMA1
-	bool "IDMA1"
-
-config 8260_PCI9_IDMA2
-	bool "IDMA2"
-
-config 8260_PCI9_IDMA3
-	bool "IDMA3"
-
-config 8260_PCI9_IDMA4
-	bool "IDMA4"
-
-endchoice
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-config RAPIDIO
-	bool "RapidIO support" if MPC8540 || MPC8560
-	help
-	  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
-endmenu
-
-menu "Advanced setup"
-
-config ADVANCED_OPTIONS
-	bool "Prompt for advanced kernel configuration options"
-	help
-	  This option will enable prompting for a variety of advanced kernel
-	  configuration options.  These options can cause the kernel to not
-	  work if they are set incorrectly, but can be used to optimize certain
-	  aspects of kernel memory management.
-
-	  Unless you know what you are doing, say N here.
-
-comment "Default settings for advanced configuration options are used"
-	depends on !ADVANCED_OPTIONS
-
-config HIGHMEM_START_BOOL
-	bool "Set high memory pool address"
-	depends on ADVANCED_OPTIONS && HIGHMEM
-	help
-	  This option allows you to set the base address of the kernel virtual
-	  area used to map high memory pages.  This can be useful in
-	  optimizing the layout of kernel virtual memory.
-
-	  Say N here unless you know what you are doing.
-
-config HIGHMEM_START
-	hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
-	default "0xfe000000"
-
-config LOWMEM_SIZE_BOOL
-	bool "Set maximum low memory"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the maximum amount of memory which
-	  will be used as "low memory", that is, memory which the kernel can
-	  access directly, without having to set up a kernel virtual mapping.
-	  This can be useful in optimizing the layout of kernel virtual
-	  memory.
-
-	  Say N here unless you know what you are doing.
-
-config LOWMEM_SIZE
-	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
-	default "0x30000000"
-
-config KERNEL_START_BOOL
-	bool "Set custom kernel base address"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the kernel virtual address at which
-	  the kernel will map low memory (the kernel image will be linked at
-	  this address).  This can be useful in optimizing the virtual memory
-	  layout of the system.
-
-	  Say N here unless you know what you are doing.
-
-config KERNEL_START
-	hex "Virtual address of kernel base" if KERNEL_START_BOOL
-	default "0xc0000000"
-
-config TASK_SIZE_BOOL
-	bool "Set custom user task size"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the amount of virtual address space
-	  allocated to user tasks.  This can be useful in optimizing the
-	  virtual memory layout of the system.
-
-	  Say N here unless you know what you are doing.
-
-config TASK_SIZE
-	hex "Size of user task space" if TASK_SIZE_BOOL
-	default "0x80000000"
-
-config CONSISTENT_START_BOOL
-	bool "Set custom consistent memory pool address"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the base virtual address
-	  of the consistent memory pool.  This pool of virtual
-	  memory is used to make consistent memory allocations.
-
-config CONSISTENT_START
-	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
-	default "0xff100000" if NOT_COHERENT_CACHE
-
-config CONSISTENT_SIZE_BOOL
-	bool "Set custom consistent memory pool size"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the size of the
-	  consistent memory pool.  This pool of virtual memory
-	  is used to make consistent memory allocations.
-
-config CONSISTENT_SIZE
-	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
-	default "0x00200000" if NOT_COHERENT_CACHE
-
-config BOOT_LOAD_BOOL
-	bool "Set the boot link/load address"
-	depends on ADVANCED_OPTIONS && !PPC_PREP
-	help
-	  This option allows you to set the initial load address of the zImage
-	  or zImage.initrd file.  This can be useful if you are on a board
-	  which has a small amount of memory.
-
-	  Say N here unless you know what you are doing.
-
-config BOOT_LOAD
-	hex "Link/load address for booting" if BOOT_LOAD_BOOL
-	default "0x00400000" if 40x || 8xx || 8260
-	default "0x01000000" if 44x
-	default "0x00800000"
-
-config PIN_TLB
-	bool "Pinned Kernel TLBs (860 ONLY)"
-	depends on ADVANCED_OPTIONS && 8xx
-
-config PPC_LIB_RHEAP
-	bool
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/ppc/8xx_io/Kconfig"
-
-source "arch/ppc/8260_io/Kconfig"
-
-
-menu "IBM 40x options"
-	depends on 40x
-
-config SERIAL_SICC
-	bool "SICC Serial port"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-config SERIAL_SICC_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-endmenu
-
-source "lib/Kconfig"
-
-source "arch/ppc/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"