aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/syslib/hawk_common.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/syslib/hawk_common.c
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/ppc/syslib/hawk_common.c')
-rw-r--r--arch/ppc/syslib/hawk_common.c319
1 files changed, 319 insertions, 0 deletions
diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c
new file mode 100644
index 00000000000..a9911dc3a82
--- /dev/null
+++ b/arch/ppc/syslib/hawk_common.c
@@ -0,0 +1,319 @@
+/*
+ * arch/ppc/syslib/hawk_common.c
+ *
+ * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
+ *
+ * Author: Mark A. Greer
+ * mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/hawk.h>
+
+/*
+ * The Falcon/Raven and HAWK has 4 sets of registers:
+ * 1) PPC Registers which define the mappings from PPC bus to PCI bus,
+ * etc.
+ * 2) PCI Registers which define the mappings from PCI bus to PPC bus and the
+ * MPIC base address.
+ * 3) MPIC registers.
+ * 4) System Memory Controller (SMC) registers.
+ */
+
+/*
+ * Initialize the Motorola MCG Raven or HAWK host bridge.
+ *
+ * This means setting up the PPC bus to PCI memory and I/O space mappings,
+ * setting the PCI memory space address of the MPIC (mapped straight
+ * through), and ioremap'ing the mpic registers.
+ * This routine will set the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
+ * addresses based on the PCI I/O address that is passed in.
+ * 'OpenPIC_Addr' will be set correctly by this routine.
+ */
+int __init
+hawk_init(struct pci_controller *hose,
+ uint ppc_reg_base,
+ ulong processor_pci_mem_start,
+ ulong processor_pci_mem_end,
+ ulong processor_pci_io_start,
+ ulong processor_pci_io_end,
+ ulong processor_mpic_base)
+{
+ uint addr, offset;
+
+ /*
+ * Some sanity checks...
+ */
+ if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
+ ((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
+ printk("hawk_init: %s\n",
+ "PPC to PCI mappings must start on 64 KB boundaries");
+ return -1;
+ }
+
+ if (((processor_pci_mem_end &0x0000ffff) != 0x0000ffff) ||
+ ((processor_pci_io_end &0x0000ffff) != 0x0000ffff)) {
+ printk("hawk_init: PPC to PCI mappings %s\n",
+ "must end just before a 64 KB boundaries");
+ return -1;
+ }
+
+ if (((processor_pci_mem_end - processor_pci_mem_start) !=
+ (hose->mem_space.end - hose->mem_space.start)) ||
+ ((processor_pci_io_end - processor_pci_io_start) !=
+ (hose->io_space.end - hose->io_space.start))) {
+ printk("hawk_init: %s\n",
+ "PPC and PCI memory or I/O space sizes don't match");
+ return -1;
+ }
+
+ if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
+ printk("hawk_init: %s\n",
+ "MPIC address must start on 256 MB boundary");
+ return -1;
+ }
+
+ if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
+ printk("hawk_init: %s\n",
+ "pci_dram_offset must be multiple of 64 KB");
+ return -1;
+ }
+
+ /*
+ * Disable previous PPC->PCI mappings.
+ */
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), 0x00000000);
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), 0x00000000);
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF2_OFF), 0x00000000);
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), 0x00000000);
+
+ /*
+ * Program the XSADD/XSOFF registers to set up the PCI Mem & I/O
+ * space mappings. These are the mappings going from the processor to
+ * the PCI bus.
+ *
+ * Note: Don't need to 'AND' start/end addresses with 0xffff0000
+ * because sanity check above ensures that they are properly
+ * aligned.
+ */
+
+ /* Set up PPC->PCI Mem mapping */
+ addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
+ offset = (hose->mem_space.start - processor_pci_mem_start) | 0xd2;
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD0_OFF), addr);
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), offset);
+
+ /* Set up PPC->MPIC mapping on the bridge */
+ addr = processor_mpic_base |
+ (((processor_mpic_base + HAWK_MPIC_SIZE) >> 16) - 1);
+ /* No write posting for this PCI Mem space */
+ offset = (hose->mem_space.start - processor_pci_mem_start) | 0xc2;
+
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD1_OFF), addr);
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), offset);
+
+ /* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
+ addr = processor_pci_io_start | (processor_pci_io_end >> 16);
+ offset = (hose->io_space.start - processor_pci_io_start) | 0xc0;
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD3_OFF), addr);
+ out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), offset);
+
+ hose->io_base_virt = (void *)ioremap(processor_pci_io_start,
+ (processor_pci_io_end - processor_pci_io_start + 1));
+
+ /*
+ * Set up the indirect method of accessing PCI config space.
+ * The PCI config addr/data pair based on start addr of PCI I/O space.
+ */
+ setup_indirect_pci(hose,
+ processor_pci_io_start + HAWK_PCI_CONFIG_ADDR_OFF,
+ processor_pci_io_start + HAWK_PCI_CONFIG_DATA_OFF);
+
+ /*
+ * Disable previous PCI->PPC mappings.
+ */
+
+ /* XXXX Put in mappings from PCI bus to processor bus XXXX */
+
+ /*
+ * Disable MPIC response to PCI I/O space (BAR 0).
+ * Make MPIC respond to PCI Mem space at specified address.
+ * (BAR 1).
+ */
+ early_write_config_dword(hose,
+ 0,
+ PCI_DEVFN(0,0),
+ PCI_BASE_ADDRESS_0,
+ 0x00000000 | 0x1);
+
+ early_write_config_dword(hose,
+ 0,
+ PCI_DEVFN(0,0),
+ PCI_BASE_ADDRESS_1,
+ (processor_mpic_base -
+ processor_pci_mem_start +
+ hose->mem_space.start) | 0x0);
+
+ /* Map MPIC into vitual memory */
+ OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
+
+ return 0;
+}
+
+/*
+ * Find the amount of RAM present.
+ * This assumes that PPCBug has initialized the memory controller (SMC)
+ * on the Falcon/HAWK correctly (i.e., it does no sanity checking).
+ * It also assumes that the memory base registers are set to configure the
+ * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc.
+ * however, RAM base registers can be skipped (e.g. A, B, C are set,
+ * D is skipped but E is set is okay).
+ */
+#define MB (1024*1024)
+
+static uint reg_offset_table[] __initdata = {
+ HAWK_SMC_RAM_A_SIZE_REG_OFF,
+ HAWK_SMC_RAM_B_SIZE_REG_OFF,
+ HAWK_SMC_RAM_C_SIZE_REG_OFF,
+ HAWK_SMC_RAM_D_SIZE_REG_OFF,
+ HAWK_SMC_RAM_E_SIZE_REG_OFF,
+ HAWK_SMC_RAM_F_SIZE_REG_OFF,
+ HAWK_SMC_RAM_G_SIZE_REG_OFF,
+ HAWK_SMC_RAM_H_SIZE_REG_OFF
+};
+
+static uint falcon_size_table[] __initdata = {
+ 0 * MB, /* 0 ==> 0 MB */
+ 16 * MB, /* 1 ==> 16 MB */
+ 32 * MB, /* 2 ==> 32 MB */
+ 64 * MB, /* 3 ==> 64 MB */
+ 128 * MB, /* 4 ==> 128 MB */
+ 256 * MB, /* 5 ==> 256 MB */
+ 1024 * MB, /* 6 ==> 1024 MB (1 GB) */
+};
+
+static uint hawk_size_table[] __initdata = {
+ 0 * MB, /* 0 ==> 0 MB */
+ 32 * MB, /* 1 ==> 32 MB */
+ 64 * MB, /* 2 ==> 64 MB */
+ 64 * MB, /* 3 ==> 64 MB */
+ 128 * MB, /* 4 ==> 128 MB */
+ 128 * MB, /* 5 ==> 128 MB */
+ 128 * MB, /* 6 ==> 128 MB */
+ 256 * MB, /* 7 ==> 256 MB */
+ 256 * MB, /* 8 ==> 256 MB */
+ 512 * MB, /* 9 ==> 512 MB */
+};
+
+/*
+ * *** WARNING: You MUST have a BAT set up to map in the SMC regs ***
+ *
+ * Read the memory controller's registers to determine the amount of system
+ * memory. Assumes that the memory controller registers are already mapped
+ * into virtual memory--too early to use ioremap().
+ */
+unsigned long __init
+hawk_get_mem_size(uint smc_base)
+{
+ unsigned long total;
+ int i, size_table_entries, reg_limit;
+ uint vend_dev_id;
+ uint *size_table;
+ u_char val;
+
+
+ vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
+
+ if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
+ printk("hawk_get_mem_size: %s (0x%x)\n",
+ "Not a Motorola Memory Controller", vend_dev_id);
+ return 0;
+ }
+
+ vend_dev_id &= 0x0000ffff;
+
+ if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_FALCON) {
+ size_table = falcon_size_table;
+ size_table_entries = sizeof(falcon_size_table) /
+ sizeof(falcon_size_table[0]);
+
+ reg_limit = FALCON_SMC_REG_COUNT;
+ }
+ else if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HAWK) {
+ size_table = hawk_size_table;
+ size_table_entries = sizeof(hawk_size_table) /
+ sizeof(hawk_size_table[0]);
+ reg_limit = HAWK_SMC_REG_COUNT;
+ }
+ else {
+ printk("hawk_get_mem_size: %s (0x%x)\n",
+ "Not a Falcon or HAWK", vend_dev_id);
+ return 0;
+ }
+
+ total = 0;
+
+ /* Check every reg because PPCBug may skip some */
+ for (i=0; i<reg_limit; i++) {
+ val = in_8((u_char *)(smc_base + reg_offset_table[i]));
+
+ if (val & 0x80) { /* If enabled */
+ val &= 0x0f;
+
+ /* Don't go past end of size_table */
+ if (val < size_table_entries) {
+ total += size_table[val];
+ }
+ else { /* Register not set correctly */
+ break;
+ }
+ }
+ }
+
+ return total;
+}
+
+int __init
+hawk_mpic_init(unsigned int pci_mem_offset)
+{
+ unsigned short devid;
+ unsigned int pci_membase;
+
+ /* Check the first PCI device to see if it is a Raven or Hawk. */
+ early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
+
+ switch (devid) {
+ case PCI_DEVICE_ID_MOTOROLA_RAVEN:
+ case PCI_DEVICE_ID_MOTOROLA_HAWK:
+ break;
+ default:
+ OpenPIC_Addr = NULL;
+ return 1;
+ }
+
+ /* Read the memory base register. */
+ early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
+
+ if (pci_membase == 0) {
+ OpenPIC_Addr = NULL;
+ return 1;
+ }
+
+ /* Map the MPIC registers to virtual memory. */
+ OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
+
+ return 0;
+}