[PATCH] ppc64: add BPA platform type

This adds the basic support for running on BPA machines.
So far, this is only the IBM workstation, and it will
not run on others without a little more generalization.

It should be possible to configure a kernel for any
combination of CONFIG_PPC_BPA with any of the other
multiplatform targets.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

9 files changed, 178 insertions, 4 deletions

diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile
index f389f2453da..c89983ab909 100644
--- a/arch/ppc64/kernel/Makefile
+++ b/arch/ppc64/kernel/Makefile
@@ -33,6 +33,8 @@ obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \
 			     pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \
 			     xics.o pSeries_setup.o pSeries_iommu.o
 
+obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_nvram.o
+
 obj-$(CONFIG_EEH)		+= eeh.o
 obj-$(CONFIG_PROC_FS)		+= proc_ppc64.o
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
@@ -59,6 +61,7 @@ ifdef CONFIG_SMP
 obj-$(CONFIG_PPC_PMAC)		+= pmac_smp.o smp-tbsync.o
 obj-$(CONFIG_PPC_ISERIES)	+= iSeries_smp.o
 obj-$(CONFIG_PPC_PSERIES)	+= pSeries_smp.o
+obj-$(CONFIG_PPC_BPA)		+= pSeries_smp.o
 obj-$(CONFIG_PPC_MAPLE)		+= smp-tbsync.o
 endif
 
diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/ppc64/kernel/bpa_setup.c
new file mode 100644
index 00000000000..d1992dd2d61
--- /dev/null
+++ b/arch/ppc64/kernel/bpa_setup.c
@@ -0,0 +1,135 @@
+/*
+ *  linux/arch/ppc/kernel/bpa_setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  Modified by PPC64 Team, IBM Corp
+ *  Modified by BPA Team, IBM Deutschland Entwicklung GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/console.h>
+
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/pci-bridge.h>
+#include <asm/iommu.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/nvram.h>
+#include <asm/cputable.h>
+
+#include "pci.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+void bpa_get_cpuinfo(struct seq_file *m)
+{
+	struct device_node *root;
+	const char *model = "";
+
+	root = of_find_node_by_path("/");
+	if (root)
+		model = get_property(root, "model", NULL);
+	seq_printf(m, "machine\t\t: BPA %s\n", model);
+	of_node_put(root);
+}
+
+static void bpa_progress(char *s, unsigned short hex)
+{
+	printk("*** %04x : %s\n", hex, s ? s : "");
+}
+
+static void __init bpa_setup_arch(void)
+{
+#ifdef CONFIG_SMP
+	smp_init_pSeries();
+#endif
+
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	if (ROOT_DEV == 0) {
+		printk("No ramdisk, default root is /dev/hda2\n");
+		ROOT_DEV = Root_HDA2;
+	}
+
+	/* Find and initialize PCI host bridges */
+	init_pci_config_tokens();
+	find_and_init_phbs();
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+	bpa_nvram_init();
+}
+
+/*
+ * Early initialization.  Relocation is on but do not reference unbolted pages
+ */
+static void __init bpa_init_early(void)
+{
+	DBG(" -> bpa_init_early()\n");
+
+	hpte_init_native();
+
+	pci_direct_iommu_init();
+
+	ppc64_interrupt_controller = IC_BPA_IIC;
+
+	DBG(" <- bpa_init_early()\n");
+}
+
+
+static int __init bpa_probe(int platform)
+{
+	if (platform != PLATFORM_BPA)
+		return 0;
+
+	return 1;
+}
+
+struct machdep_calls __initdata bpa_md = {
+	.probe			= bpa_probe,
+	.setup_arch		= bpa_setup_arch,
+	.init_early		= bpa_init_early,
+	.get_cpuinfo		= bpa_get_cpuinfo,
+	.restart		= rtas_restart,
+	.power_off		= rtas_power_off,
+	.halt			= rtas_halt,
+	.get_boot_time		= rtas_get_boot_time,
+	.get_rtc_time		= rtas_get_rtc_time,
+	.set_rtc_time		= rtas_set_rtc_time,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= bpa_progress,
+};
diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S
index 3bd95182085..42fc08cf87a 100644
--- a/arch/ppc64/kernel/cpu_setup_power4.S
+++ b/arch/ppc64/kernel/cpu_setup_power4.S
@@ -73,7 +73,21 @@ _GLOBAL(__970_cpu_preinit)
 
 _GLOBAL(__setup_cpu_power4)
 	blr
-	
+
+_GLOBAL(__setup_cpu_be)
+        /* Set large page sizes LP=0: 16MB, LP=1: 64KB */
+        addi    r3, 0,  0
+        ori     r3, r3, HID6_LB
+        sldi    r3, r3, 32
+        nor     r3, r3, r3
+        mfspr   r4, SPRN_HID6
+        and     r4, r4, r3
+        addi    r3, 0, 0x02000
+        sldi    r3, r3, 32
+        or      r4, r4, r3
+        mtspr   SPRN_HID6, r4
+	blr
+
 _GLOBAL(__setup_cpu_ppc970)
 	mfspr	r0,SPRN_HID0
 	li	r11,5			/* clear DOZE and SLEEP */
diff --git a/arch/ppc64/kernel/cputable.c b/arch/ppc64/kernel/cputable.c
index 8644a864805..1d162c7c59d 100644
--- a/arch/ppc64/kernel/cputable.c
+++ b/arch/ppc64/kernel/cputable.c
@@ -34,6 +34,7 @@ EXPORT_SYMBOL(cur_cpu_spec);
 extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec);
 
 
 /* We only set the altivec features if the kernel was compiled with altivec
@@ -162,6 +163,16 @@ struct cpu_spec	cpu_specs[] = {
 	    __setup_cpu_power4,
 	    COMMON_PPC64_FW
     },
+    {	/* BE DD1.x  */
+	    0xffff0000, 0x00700000, "Broadband Engine",
+	    CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+		    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
+		    CPU_FTR_SMT,
+	    COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP,
+	    128, 128,
+	    __setup_cpu_be,
+	    COMMON_PPC64_FW
+    },
     {	/* default match */
 	    0x00000000, 0x00000000, "POWER4 (compatible)",
   	    CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c
index d860467b8f0..3defc8c33ad 100644
--- a/arch/ppc64/kernel/irq.c
+++ b/arch/ppc64/kernel/irq.c
@@ -395,6 +395,9 @@ int virt_irq_create_mapping(unsigned int real_irq)
 	if (ppc64_interrupt_controller == IC_OPEN_PIC)
 		return real_irq;	/* no mapping for openpic (for now) */
 
+	if (ppc64_interrupt_controller == IC_BPA_IIC)
+		return real_irq;	/* no mapping for iic either */
+
 	/* don't map interrupts < MIN_VIRT_IRQ */
 	if (real_irq < MIN_VIRT_IRQ) {
 		virt_irq_to_real_map[real_irq] = real_irq;
diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c
index 0914b0669b0..a87c66a9652 100644
--- a/arch/ppc64/kernel/proc_ppc64.c
+++ b/arch/ppc64/kernel/proc_ppc64.c
@@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void)
 	if (!root)
 		return 1;
 
-	if (!(systemcfg->platform & PLATFORM_PSERIES))
+	if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA)))
 		return 0;
 
 	if (!proc_mkdir("rtas", root))
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index b7683abfbe6..e248a7950ae 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -1915,9 +1915,9 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 		prom_send_capabilities();
 
 	/*
-	 * On pSeries, copy the CPU hold code
+	 * On pSeries and BPA, copy the CPU hold code
 	 */
-       	if (RELOC(of_platform) & PLATFORM_PSERIES)
+       	if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA))
        		copy_and_flush(0, KERNELBASE - offset, 0x100, 0);
 
 	/*
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
index 93b0ee88cda..10222008fe2 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/ppc64/kernel/setup.c
@@ -344,6 +344,7 @@ static void __init setup_cpu_maps(void)
 extern struct machdep_calls pSeries_md;
 extern struct machdep_calls pmac_md;
 extern struct machdep_calls maple_md;
+extern struct machdep_calls bpa_md;
 
 /* Ultimately, stuff them in an elf section like initcalls... */
 static struct machdep_calls __initdata *machines[] = {
@@ -356,6 +357,9 @@ static struct machdep_calls __initdata *machines[] = {
 #ifdef CONFIG_PPC_MAPLE
 	&maple_md,
 #endif /* CONFIG_PPC_MAPLE */
+#ifdef CONFIG_PPC_BPA
+	&bpa_md,
+#endif
 	NULL
 };
 
diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c
index 7e52cb2605e..a8d5e83ee89 100644
--- a/arch/ppc64/kernel/traps.c
+++ b/arch/ppc64/kernel/traps.c
@@ -126,6 +126,10 @@ int die(const char *str, struct pt_regs *regs, long err)
 			printk("POWERMAC ");
 			nl = 1;
 			break;
+		case PLATFORM_BPA:
+			printk("BPA ");
+			nl = 1;
+			break;
 	}
 	if (nl)
 		printk("\n");