diff options
author | Arjan van de Ven <arjan@linux.intel.com> | 2008-10-17 09:20:26 -0700 |
---|---|---|
committer | Arjan van de Ven <arjan@linux.intel.com> | 2008-10-17 09:20:26 -0700 |
commit | 651dab4264e4ba0e563f5ff56f748127246e9065 (patch) | |
tree | 016630974bdcb00fe529b673f96d389e0fd6dc94 /arch/sparc/include/asm/dma_64.h | |
parent | 40b8606253552109815786e5d4b0de98782d31f5 (diff) | |
parent | 2e532d68a2b3e2aa6b19731501222069735c741c (diff) |
Merge commit 'linus/master' into merge-linus
Conflicts:
arch/x86/kvm/i8254.c
Diffstat (limited to 'arch/sparc/include/asm/dma_64.h')
-rw-r--r-- | arch/sparc/include/asm/dma_64.h | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h deleted file mode 100644 index 46a8aecffc0..00000000000 --- a/arch/sparc/include/asm/dma_64.h +++ /dev/null @@ -1,205 +0,0 @@ -/* - * include/asm/dma.h - * - * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _ASM_SPARC64_DMA_H -#define _ASM_SPARC64_DMA_H - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/spinlock.h> - -#include <asm/sbus.h> -#include <asm/delay.h> -#include <asm/oplib.h> - -/* These are irrelevant for Sparc DMA, but we leave it in so that - * things can compile. - */ -#define MAX_DMA_CHANNELS 8 -#define DMA_MODE_READ 1 -#define DMA_MODE_WRITE 2 -#define MAX_DMA_ADDRESS (~0UL) - -/* Useful constants */ -#define SIZE_16MB (16*1024*1024) -#define SIZE_64K (64*1024) - -/* SBUS DMA controller reg offsets */ -#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ -#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ -#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ -#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ - -/* DVMA chip revisions */ -enum dvma_rev { - dvmarev0, - dvmaesc1, - dvmarev1, - dvmarev2, - dvmarev3, - dvmarevplus, - dvmahme -}; - -#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) - -/* Linux DMA information structure, filled during probe. */ -struct sbus_dma { - struct sbus_dma *next; - struct sbus_dev *sdev; - void __iomem *regs; - - /* Status, misc info */ - int node; /* Prom node for this DMA device */ - int running; /* Are we doing DMA now? */ - int allocated; /* Are we "owned" by anyone yet? */ - - /* Transfer information. */ - u32 addr; /* Start address of current transfer */ - int nbytes; /* Size of current transfer */ - int realbytes; /* For splitting up large transfers, etc. */ - - /* DMA revision */ - enum dvma_rev revision; -}; - -extern struct sbus_dma *dma_chain; - -/* Broken hardware... */ -#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) -#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) - -/* Main routines in dma.c */ -extern void dvma_init(struct sbus_bus *); - -/* Fields in the cond_reg register */ -/* First, the version identification bits */ -#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ -#define DMA_VERS0 0x00000000 /* Sunray DMA version */ -#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ -#define DMA_VERS1 0x80000000 /* DMA rev 1 */ -#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ -#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ -#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ - -#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ -#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ -#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ -#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ -#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ -#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ -#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ -#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ -#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ -#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ -#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ -#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ -#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ -#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ -#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ -#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ -#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ -#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */ -#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ -#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ -#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ -#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ -#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */ -#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */ -#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */ -#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ -#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ -#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */ -#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */ -#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ -#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ -#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ -#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ -#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ -#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ -#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ -#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ -#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ -#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ -#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ -#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */ - -/* Values describing the burst-size property from the PROM */ -#define DMA_BURST1 0x01 -#define DMA_BURST2 0x02 -#define DMA_BURST4 0x04 -#define DMA_BURST8 0x08 -#define DMA_BURST16 0x10 -#define DMA_BURST32 0x20 -#define DMA_BURST64 0x40 -#define DMA_BURSTBITS 0x7f - -/* Determine highest possible final transfer address given a base */ -#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) - -/* Yes, I hack a lot of elisp in my spare time... */ -#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR)) -#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)) -#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE)) -#define DMA_OFF(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp &= ~DMA_ENABLE; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_INTSOFF(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp &= ~DMA_INT_ENAB; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_INTSON(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp |= DMA_INT_ENAB; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_PUNTFIFO(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp |= DMA_FIFO_INV; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_SETSTART(__regs, __addr) \ - sbus_writel((u32)(__addr), (__regs) + DMA_ADDR); -#define DMA_BEGINDMA_W(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_BEGINDMA_R(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp |= (DMA_ENABLE|DMA_INT_ENAB); \ - tmp &= ~DMA_ST_WRITE; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) - -/* For certain DMA chips, we need to disable ints upon irq entry - * and turn them back on when we are done. So in any ESP interrupt - * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT - * when leaving the handler. You have been warned... - */ -#define DMA_IRQ_ENTRY(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ - } while (0) - -#define DMA_IRQ_EXIT(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ - } while(0) - -#define for_each_dvma(dma) \ - for((dma) = dma_chain; (dma); (dma) = (dma)->next) - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* !(_ASM_SPARC64_DMA_H) */ |