diff options
author | Arjan van de Ven <arjan@linux.intel.com> | 2008-10-17 09:20:26 -0700 |
---|---|---|
committer | Arjan van de Ven <arjan@linux.intel.com> | 2008-10-17 09:20:26 -0700 |
commit | 651dab4264e4ba0e563f5ff56f748127246e9065 (patch) | |
tree | 016630974bdcb00fe529b673f96d389e0fd6dc94 /arch/sparc/kernel/sun4m_irq.c | |
parent | 40b8606253552109815786e5d4b0de98782d31f5 (diff) | |
parent | 2e532d68a2b3e2aa6b19731501222069735c741c (diff) |
Merge commit 'linus/master' into merge-linus
Conflicts:
arch/x86/kvm/i8254.c
Diffstat (limited to 'arch/sparc/kernel/sun4m_irq.c')
-rw-r--r-- | arch/sparc/kernel/sun4m_irq.c | 495 |
1 files changed, 253 insertions, 242 deletions
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 94e02de960e..f10317179ee 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -20,6 +20,8 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/ioport.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/ptrace.h> #include <asm/processor.h> @@ -35,59 +37,27 @@ #include <asm/smp.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/sbus.h> #include <asm/cacheflush.h> #include "irq.h" -/* On the sun4m, just like the timers, we have both per-cpu and master - * interrupt registers. - */ - -/* These registers are used for sending/receiving irqs from/to - * different cpu's. - */ -struct sun4m_intreg_percpu { - unsigned int tbt; /* Interrupts still pending for this cpu. */ - - /* These next two registers are WRITE-ONLY and are only - * "on bit" sensitive, "off bits" written have NO affect. - */ - unsigned int clear; /* Clear this cpus irqs here. */ - unsigned int set; /* Set this cpus irqs here. */ - unsigned char space[PAGE_SIZE - 12]; +struct sun4m_irq_percpu { + u32 pending; + u32 clear; + u32 set; }; -/* - * djhr - * Actually the clear and set fields in this struct are misleading.. - * according to the SLAVIO manual (and the same applies for the SEC) - * the clear field clears bits in the mask which will ENABLE that IRQ - * the set field sets bits in the mask to DISABLE the IRQ. - * - * Also the undirected_xx address in the SLAVIO is defined as - * RESERVED and write only.. - * - * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor - * sun4m machines, for MP the layout makes more sense. - */ -struct sun4m_intregs { - struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS]; - unsigned int tbt; /* IRQ's that are still pending. */ - unsigned int irqs; /* Master IRQ bits. */ - - /* Again, like the above, two these registers are WRITE-ONLY. */ - unsigned int clear; /* Clear master IRQ's by setting bits here. */ - unsigned int set; /* Set master IRQ's by setting bits here. */ - - /* This register is both READ and WRITE. */ - unsigned int undirected_target; /* Which cpu gets undirected irqs. */ +struct sun4m_irq_global { + u32 pending; + u32 mask; + u32 mask_clear; + u32 mask_set; + u32 interrupt_target; }; -static unsigned long dummy; - -struct sun4m_intregs *sun4m_interrupts; -unsigned long *irq_rcvreg = &dummy; +/* Code in entry.S needs to get at these register mappings. */ +struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS]; +struct sun4m_irq_global __iomem *sun4m_irq_global; /* Dave Redman (djhr@tadpole.co.uk) * The sun4m interrupt registers. @@ -101,8 +71,9 @@ unsigned long *irq_rcvreg = &dummy; #define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ #define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ -#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */ -#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */ +#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */ +#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */ +#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */ #define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ #define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ #define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ @@ -113,75 +84,126 @@ unsigned long *irq_rcvreg = &dummy; #define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ #define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ #define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ +#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */ + +#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \ + SUN4M_INT_M2S_WRITE_ERR | \ + SUN4M_INT_ECC_ERR | \ + SUN4M_INT_VME_ERR) #define SUN4M_INT_SBUS(x) (1 << (x+7)) #define SUN4M_INT_VME(x) (1 << (x)) -/* These tables only apply for interrupts greater than 15.. - * - * any intr value below 0x10 is considered to be a soft-int - * this may be useful or it may not.. but that's how I've done it. - * and it won't clash with what OBP is telling us about devices. +/* Interrupt levels used by OBP */ +#define OBP_INT_LEVEL_SOFT 0x10 +#define OBP_INT_LEVEL_ONBOARD 0x20 +#define OBP_INT_LEVEL_SBUS 0x30 +#define OBP_INT_LEVEL_VME 0x40 + +/* Interrupt level assignment on sun4m: + * + * level source + * ------------------------------------------------------------ + * 1 softint-1 + * 2 softint-2, VME/SBUS level 1 + * 3 softint-3, VME/SBUS level 2 + * 4 softint-4, onboard SCSI + * 5 softint-5, VME/SBUS level 3 + * 6 softint-6, onboard ETHERNET + * 7 softint-7, VME/SBUS level 4 + * 8 softint-8, onboard VIDEO + * 9 softint-9, VME/SBUS level 5, Module Interrupt + * 10 softint-10, system counter/timer + * 11 softint-11, VME/SBUS level 6, Floppy + * 12 softint-12, Keyboard/Mouse, Serial + * 13 softint-13, VME/SBUS level 7, ISDN Audio + * 14 softint-14, per-processor counter/timer + * 15 softint-15, Asynchronous Errors (broadcast) * - * take an encoded intr value and lookup if it's valid - * then get the mask bits that match from irq_mask + * Each interrupt source is masked distinctly in the sun4m interrupt + * registers. The PIL level alone is therefore ambiguous, since multiple + * interrupt sources map to a single PIL. * - * P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee. + * This ambiguity is resolved in the 'intr' property for device nodes + * in the OF device tree. Each 'intr' property entry is composed of + * two 32-bit words. The first word is the IRQ priority value, which + * is what we're intersted in. The second word is the IRQ vector, which + * is unused. + * + * The low 4 bits of the IRQ priority indicate the PIL, and the upper + * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20 + * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled. + * + * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI + * whereas a value of 0x33 is SBUS level 2. Here are some sample + * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and + * Tadpole S3 GX systems. + * + * esp: 0x24 onboard ESP SCSI + * le: 0x26 onboard Lance ETHERNET + * p9100: 0x32 SBUS level 1 P9100 video + * bpp: 0x33 SBUS level 2 BPP parallel port device + * DBRI: 0x39 SBUS level 5 DBRI ISDN audio + * SUNW,leo: 0x39 SBUS level 5 LEO video + * pcmcia: 0x3b SBUS level 6 PCMCIA controller + * uctrl: 0x3b SBUS level 6 UCTRL device + * modem: 0x3d SBUS level 7 MODEM + * zs: 0x2c onboard keyboard/mouse/serial + * floppy: 0x2b onboard Floppy + * power: 0x22 onboard power device (XXX unknown mask bit XXX) */ -static unsigned char irq_xlate[32] = { - /* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, f */ - 0, 0, 0, 0, 1, 0, 2, 0, 3, 0, 4, 5, 6, 14, 0, 7, - 0, 0, 8, 9, 0, 10, 0, 11, 0, 12, 0, 13, 0, 14, 0, 0 -}; -static unsigned long irq_mask[] = { - 0, /* illegal index */ - SUN4M_INT_SCSI, /* 1 irq 4 */ - SUN4M_INT_ETHERNET, /* 2 irq 6 */ - SUN4M_INT_VIDEO, /* 3 irq 8 */ - SUN4M_INT_REALTIME, /* 4 irq 10 */ - SUN4M_INT_FLOPPY, /* 5 irq 11 */ - (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), /* 6 irq 12 */ - SUN4M_INT_MODULE_ERR, /* 7 irq 15 */ - SUN4M_INT_SBUS(0), /* 8 irq 2 */ - SUN4M_INT_SBUS(1), /* 9 irq 3 */ - SUN4M_INT_SBUS(2), /* 10 irq 5 */ - SUN4M_INT_SBUS(3), /* 11 irq 7 */ - SUN4M_INT_SBUS(4), /* 12 irq 9 */ - SUN4M_INT_SBUS(5), /* 13 irq 11 */ - SUN4M_INT_SBUS(6) /* 14 irq 13 */ +static unsigned long irq_mask[0x50] = { + /* SMP */ + 0, SUN4M_SOFT_INT(1), + SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), + SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), + SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7), + SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9), + SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), + SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), + SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), + /* soft */ + 0, SUN4M_SOFT_INT(1), + SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), + SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), + SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7), + SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9), + SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), + SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), + SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), + /* onboard */ + 0, 0, 0, 0, + SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0, + SUN4M_INT_VIDEO, SUN4M_INT_MODULE, + SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY, + (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), + SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR, + /* sbus */ + 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1), + 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3), + 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5), + 0, SUN4M_INT_SBUS(6), 0, 0, + /* vme */ + 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1), + 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3), + 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5), + 0, SUN4M_INT_VME(6), 0, 0 }; -static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 }; - -static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, - unsigned int sbint) -{ - if (sbint >= sizeof(sun4m_pil_map)) { - printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint); - BUG(); - } - return sun4m_pil_map[sbint] | 0x30; -} - static unsigned long sun4m_get_irqmask(unsigned int irq) { unsigned long mask; - if (irq > 0x20) { - /* OBIO/SBUS interrupts */ - irq &= 0x1f; - mask = irq_mask[irq_xlate[irq]]; - if (!mask) - printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq); - } else { - /* Soft Interrupts will come here. - * Currently there is no way to trigger them but I'm sure - * something could be cooked up. - */ - irq &= 0xf; - mask = SUN4M_SOFT_INT(irq); - } + if (irq < 0x50) + mask = irq_mask[irq]; + else + mask = 0; + + if (!mask) + printk(KERN_ERR "sun4m_get_irqmask: IRQ%d has no valid mask!\n", + irq); + return mask; } @@ -193,9 +215,9 @@ static void sun4m_disable_irq(unsigned int irq_nr) mask = sun4m_get_irqmask(irq_nr); local_irq_save(flags); if (irq_nr > 15) - sun4m_interrupts->set = mask; + sbus_writel(mask, &sun4m_irq_global->mask_set); else - sun4m_interrupts->cpu_intregs[cpu].set = mask; + sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); local_irq_restore(flags); } @@ -212,13 +234,13 @@ static void sun4m_enable_irq(unsigned int irq_nr) mask = sun4m_get_irqmask(irq_nr); local_irq_save(flags); if (irq_nr > 15) - sun4m_interrupts->clear = mask; + sbus_writel(mask, &sun4m_irq_global->mask_clear); else - sun4m_interrupts->cpu_intregs[cpu].clear = mask; + sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); local_irq_restore(flags); } else { local_irq_save(flags); - sun4m_interrupts->clear = SUN4M_INT_FLOPPY; + sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear); local_irq_restore(flags); } } @@ -236,10 +258,10 @@ static unsigned long cpu_pil_to_imask[16] = { /*9*/ SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR, /*10*/ SUN4M_INT_REALTIME, /*11*/ SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY, -/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS, -/*13*/ SUN4M_INT_AUDIO, +/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS, +/*13*/ SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO, /*14*/ SUN4M_INT_E14, -/*15*/ 0x00000000 +/*15*/ SUN4M_INT_ERROR }; /* We assume the caller has disabled local interrupts when these are called, @@ -247,126 +269,141 @@ static unsigned long cpu_pil_to_imask[16] = { */ static void sun4m_disable_pil_irq(unsigned int pil) { - sun4m_interrupts->set = cpu_pil_to_imask[pil]; + sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_set); } static void sun4m_enable_pil_irq(unsigned int pil) { - sun4m_interrupts->clear = cpu_pil_to_imask[pil]; + sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_clear); } #ifdef CONFIG_SMP static void sun4m_send_ipi(int cpu, int level) { - unsigned long mask; - - mask = sun4m_get_irqmask(level); - sun4m_interrupts->cpu_intregs[cpu].set = mask; + unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); } static void sun4m_clear_ipi(int cpu, int level) { - unsigned long mask; - - mask = sun4m_get_irqmask(level); - sun4m_interrupts->cpu_intregs[cpu].clear = mask; + unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); } static void sun4m_set_udt(int cpu) { - sun4m_interrupts->undirected_target = cpu; + sbus_writel(cpu, &sun4m_irq_global->interrupt_target); } #endif -#define OBIO_INTR 0x20 -#define TIMER_IRQ (OBIO_INTR | 10) -#define PROFILE_IRQ (OBIO_INTR | 14) +struct sun4m_timer_percpu { + u32 l14_limit; + u32 l14_count; + u32 l14_limit_noclear; + u32 user_timer_start_stop; +}; + +static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS]; + +struct sun4m_timer_global { + u32 l10_limit; + u32 l10_count; + u32 l10_limit_noclear; + u32 reserved; + u32 timer_config; +}; + +static struct sun4m_timer_global __iomem *timers_global; + +#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10) -static struct sun4m_timer_regs *sun4m_timers; unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10); static void sun4m_clear_clock_irq(void) { - volatile unsigned int clear_intr; - clear_intr = sun4m_timers->l10_timer_limit; + sbus_readl(&timers_global->l10_limit); } -static void sun4m_clear_profile_irq(int cpu) +void sun4m_nmi(struct pt_regs *regs) { - volatile unsigned int clear; - - clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit; + unsigned long afsr, afar, si; + + printk(KERN_ERR "Aieee: sun4m NMI received!\n"); + /* XXX HyperSparc hack XXX */ + __asm__ __volatile__("mov 0x500, %%g1\n\t" + "lda [%%g1] 0x4, %0\n\t" + "mov 0x600, %%g1\n\t" + "lda [%%g1] 0x4, %1\n\t" : + "=r" (afsr), "=r" (afar)); + printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar); + si = sbus_readl(&sun4m_irq_global->pending); + printk(KERN_ERR "si=%08lx\n", si); + if (si & SUN4M_INT_MODULE_ERR) + printk(KERN_ERR "Module async error\n"); + if (si & SUN4M_INT_M2S_WRITE_ERR) + printk(KERN_ERR "MBus/SBus async error\n"); + if (si & SUN4M_INT_ECC_ERR) + printk(KERN_ERR "ECC memory error\n"); + if (si & SUN4M_INT_VME_ERR) + printk(KERN_ERR "VME async error\n"); + printk(KERN_ERR "you lose buddy boy...\n"); + show_regs(regs); + prom_halt(); +} + +/* Exported for sun4m_smp.c */ +void sun4m_clear_profile_irq(int cpu) +{ + sbus_readl(&timers_percpu[cpu]->l14_limit); } static void sun4m_load_profile_irq(int cpu, unsigned int limit) { - sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit; + sbus_writel(limit, &timers_percpu[cpu]->l14_limit); } static void __init sun4m_init_timers(irq_handler_t counter_fn) { - int reg_count, irq, cpu; - struct linux_prom_registers cnt_regs[PROMREG_MAX]; - int obio_node, cnt_node; - struct resource r; - - cnt_node = 0; - if((obio_node = - prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 || - (obio_node = prom_getchild (obio_node)) == 0 || - (cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) { - prom_printf("Cannot find /obio/counter node\n"); - prom_halt(); + struct device_node *dp = of_find_node_by_name(NULL, "counter"); + int i, err, len, num_cpu_timers; + const u32 *addr; + + if (!dp) { + printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n"); + return; } - reg_count = prom_getproperty(cnt_node, "reg", - (void *) cnt_regs, sizeof(cnt_regs)); - reg_count = (reg_count/sizeof(struct linux_prom_registers)); - - /* Apply the obio ranges to the timer registers. */ - prom_apply_obio_ranges(cnt_regs, reg_count); - - cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr; - cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size; - cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io; - for(obio_node = 1; obio_node < 4; obio_node++) { - cnt_regs[obio_node].phys_addr = - cnt_regs[obio_node-1].phys_addr + PAGE_SIZE; - cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size; - cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io; + + addr = of_get_property(dp, "address", &len); + if (!addr) { + printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n"); + return; } - memset((char*)&r, 0, sizeof(struct resource)); - /* Map the per-cpu Counter registers. */ - r.flags = cnt_regs[0].which_io; - r.start = cnt_regs[0].phys_addr; - sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0, - PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt"); - /* Map the system Counter register. */ - /* XXX Here we expect consequent calls to yeld adjusent maps. */ - r.flags = cnt_regs[4].which_io; - r.start = cnt_regs[4].phys_addr; - sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt"); - - sun4m_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10); - master_l10_counter = &sun4m_timers->l10_cur_count; - master_l10_limit = &sun4m_timers->l10_timer_limit; - - irq = request_irq(TIMER_IRQ, - counter_fn, - (IRQF_DISABLED | SA_STATIC_ALLOC), - "timer", NULL); - if (irq) { - prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); - prom_halt(); + num_cpu_timers = (len / sizeof(u32)) - 1; + for (i = 0; i < num_cpu_timers; i++) { + timers_percpu[i] = (void __iomem *) + (unsigned long) addr[i]; } - - if (!cpu_find_by_instance(1, NULL, NULL)) { - for(cpu = 0; cpu < 4; cpu++) - sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0; - sun4m_interrupts->set = SUN4M_INT_E14; - } else { - sun4m_timers->cpu_timers[0].l14_timer_limit = 0; + timers_global = (void __iomem *) + (unsigned long) addr[num_cpu_timers]; + + sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit); + + master_l10_counter = &timers_global->l10_count; + + err = request_irq(TIMER_IRQ, counter_fn, + (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL); + if (err) { + printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n", + err); + return; } + + for (i = 0; i < num_cpu_timers; i++) + sbus_writel(0, &timers_percpu[i]->l14_limit); + if (num_cpu_timers == 4) + sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set); + #ifdef CONFIG_SMP { unsigned long flags; @@ -390,70 +427,43 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) void __init sun4m_init_IRQ(void) { - int ie_node,i; - struct linux_prom_registers int_regs[PROMREG_MAX]; - int num_regs; - struct resource r; - int mid; - - local_irq_disable(); - if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 || - (ie_node = prom_getchild (ie_node)) == 0 || - (ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) { - prom_printf("Cannot find /obio/interrupt node\n"); - prom_halt(); + struct device_node *dp = of_find_node_by_name(NULL, "interrupt"); + int len, i, mid, num_cpu_iregs; + const u32 *addr; + + if (!dp) { + printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n"); + return; } - num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs, - sizeof(int_regs)); - num_regs = (num_regs/sizeof(struct linux_prom_registers)); - - /* Apply the obio ranges to these registers. */ - prom_apply_obio_ranges(int_regs, num_regs); - - int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr; - int_regs[4].reg_size = int_regs[num_regs-1].reg_size; - int_regs[4].which_io = int_regs[num_regs-1].which_io; - for(ie_node = 1; ie_node < 4; ie_node++) { - int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE; - int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size; - int_regs[ie_node].which_io = int_regs[ie_node-1].which_io; + + addr = of_get_property(dp, "address", &len); + if (!addr) { + printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n"); + return; } - memset((char *)&r, 0, sizeof(struct resource)); - /* Map the interrupt registers for all possible cpus. */ - r.flags = int_regs[0].which_io; - r.start = int_regs[0].phys_addr; - sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0, - PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu"); + num_cpu_iregs = (len / sizeof(u32)) - 1; + for (i = 0; i < num_cpu_iregs; i++) { + sun4m_irq_percpu[i] = (void __iomem *) + (unsigned long) addr[i]; + } + sun4m_irq_global = (void __iomem *) + (unsigned long) addr[num_cpu_iregs]; - /* Map the system interrupt control registers. */ - r.flags = int_regs[4].which_io; - r.start = int_regs[4].phys_addr; - sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system"); + local_irq_disable(); - sun4m_interrupts->set = ~SUN4M_INT_MASKALL; + sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set); for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++) - sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff; - - if (!cpu_find_by_instance(1, NULL, NULL)) { - /* system wide interrupts go to cpu 0, this should always - * be safe because it is guaranteed to be fitted or OBP doesn't - * come up - * - * Not sure, but writing here on SLAVIO systems may puke - * so I don't do it unless there is more than 1 cpu. - */ - irq_rcvreg = (unsigned long *) - &sun4m_interrupts->undirected_target; - sun4m_interrupts->undirected_target = 0; - } - BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM); + sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear); + + if (num_cpu_iregs == 4) + sbus_writel(0, &sun4m_irq_global->interrupt_target); + BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM); sparc_init_timers = sun4m_init_timers; #ifdef CONFIG_SMP @@ -461,5 +471,6 @@ void __init sun4m_init_IRQ(void) BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM); #endif + /* Cannot enable interrupts until OBP ticker is disabled. */ } |