Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

4 files changed, 56 insertions, 104 deletions

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 723989d7f80..631086159c5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -33,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/bootmem.h>
 #include <linux/ioport.h>
+#include <linux/pci.h>
 
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
@@ -522,7 +523,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 {
 	unsigned int irq;
 	unsigned int plat_gsi = gsi;
@@ -532,14 +533,14 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
 	 */
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
-		if (triggering == ACPI_LEVEL_SENSITIVE)
+		if (trigger == ACPI_LEVEL_SENSITIVE)
 			eisa_set_level_irq(gsi);
 	}
 #endif
 
 #ifdef CONFIG_X86_IO_APIC
 	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
-		plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+		plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
 	}
 #endif
 	acpi_gsi_to_irq(plat_gsi, &irq);
@@ -903,10 +904,8 @@ extern int es7000_plat;
 #endif
 
 static struct {
-	int apic_id;
 	int gsi_base;
 	int gsi_end;
-	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
 } mp_ioapic_routing[MAX_IO_APICS];
 
 int mp_find_ioapic(int gsi)
@@ -986,16 +985,12 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
 	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
 	mp_ioapics[idx].apicver = io_apic_get_version(idx);
-#else
-	mp_ioapics[idx].apicver = 0;
-#endif
+
 	/*
 	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
 	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
 	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
 	mp_ioapic_routing[idx].gsi_base = gsi_base;
 	mp_ioapic_routing[idx].gsi_end = gsi_base +
 	    io_apic_get_redir_entries(idx);
@@ -1158,26 +1153,52 @@ void __init mp_config_acpi_legacy_irqs(void)
 	}
 }
 
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+			int polarity)
 {
+#ifdef CONFIG_X86_MPPARSE
+	struct mpc_intsrc mp_irq;
+	struct pci_dev *pdev;
+	unsigned char number;
+	unsigned int devfn;
 	int ioapic;
-	int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM	4096
-#define IRQ_COMPRESSION_START	64
+	u8 pin;
 
-	static int pci_irq = IRQ_COMPRESSION_START;
-	/*
-	 * Mapping between Global System Interrupts, which
-	 * represent all possible interrupts, and IRQs
-	 * assigned to actual devices.
-	 */
-	static int gsi_to_irq[MAX_GSI_NUM];
-#else
+	if (!acpi_ioapic)
+		return 0;
+	if (!dev)
+		return 0;
+	if (dev->bus != &pci_bus_type)
+		return 0;
+
+	pdev = to_pci_dev(dev);
+	number = pdev->bus->number;
+	devfn = pdev->devfn;
+	pin = pdev->pin;
+	/* print the entry should happen on mptable identically */
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+	mp_irq.srcbus = number;
+	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+	ioapic = mp_find_ioapic(gsi);
+	mp_irq.dstapic = mp_ioapics[ioapic].apicid;
+	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+	save_mp_irq(&mp_irq);
+#endif
+	return 0;
+}
+
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+	int ioapic;
+	int ioapic_pin;
+	struct io_apic_irq_attr irq_attr;
 
 	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
 		return gsi;
-#endif
 
 	/* Don't set up the ACPI SCI because it's already set up */
 	if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1196,93 +1217,22 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		gsi = ioapic_renumber_irq(ioapic, gsi);
 #endif
 
-	/*
-	 * Avoid pin reprogramming.  PRTs typically include entries
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
 	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
 		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+		       "%d-%d\n", mp_ioapics[ioapic].apicid,
 		       ioapic_pin);
 		return gsi;
 	}
-	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		pr_debug("Pin %d-%d already programmed\n",
-			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
-		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
-		return gsi;
-#endif
-	}
-
-	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
-	/*
-	 * For GSI >= 64, use IRQ compression
-	 */
-	if ((gsi >= IRQ_COMPRESSION_START)
-	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
-		/*
-		 * For PCI devices assign IRQs in order, avoiding gaps
-		 * due to unused I/O APIC pins.
-		 */
-		int irq = gsi;
-		if (gsi < MAX_GSI_NUM) {
-			/*
-			 * Retain the VIA chipset work-around (gsi > 15), but
-			 * avoid a problem where the 8254 timer (IRQ0) is setup
-			 * via an override (so it's not on pin 0 of the ioapic),
-			 * and at the same time, the pin 0 interrupt is a PCI
-			 * type.  The gsi > 15 test could cause these two pins
-			 * to be shared as IRQ0, and they are not shareable.
-			 * So test for this condition, and if necessary, avoid
-			 * the pin collision.
-			 */
-			gsi = pci_irq++;
-			/*
-			 * Don't assign IRQ used by ACPI SCI
-			 */
-			if (gsi == acpi_gbl_FADT.sci_interrupt)
-				gsi = pci_irq++;
-			gsi_to_irq[irq] = gsi;
-		} else {
-			printk(KERN_ERR "GSI %u is too high\n", gsi);
-			return gsi;
-		}
-	}
-#endif
-	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	return gsi;
-}
 
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
-			u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
-	struct mpc_intsrc mp_irq;
-	int ioapic;
+	if (enable_update_mptable)
+		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
 
-	if (!acpi_ioapic)
-		return 0;
+	set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+			     trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+			     polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+	io_apic_set_pci_routing(dev, gsi, &irq_attr);
 
-	/* print the entry should happen on mptable identically */
-	mp_irq.type = MP_INTSRC;
-	mp_irq.irqtype = mp_INT;
-	mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
-				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
-	mp_irq.srcbus = number;
-	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
-	ioapic = mp_find_ioapic(gsi);
-	mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
-	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
-	save_mp_irq(&mp_irq);
-#endif
-	return 0;
+	return gsi;
 }
 
 /*
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
index 1c31cc0e9de..167bc16ce0e 100644
--- a/arch/x86/kernel/acpi/realmode/Makefile
+++ b/arch/x86/kernel/acpi/realmode/Makefile
@@ -9,7 +9,7 @@
 always		:= wakeup.bin
 targets		:= wakeup.elf wakeup.lds
 
-wakeup-y	+= wakeup.o wakemain.o video-mode.o copy.o
+wakeup-y	+= wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o
 
 # The link order of the video-*.o modules can matter.  In particular,
 # video-vga.o *must* be listed first, followed by video-vesa.o.
diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/kernel/acpi/realmode/bioscall.S
new file mode 100644
index 00000000000..f51eb0bb56c
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/bioscall.S
@@ -0,0 +1 @@
+#include "../../../boot/bioscall.S"
diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/kernel/acpi/realmode/regs.c
new file mode 100644
index 00000000000..6206033ba20
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/regs.c
@@ -0,0 +1 @@
+#include "../../../boot/regs.c"