Merge branch 'x86/irq' into x86/apic

Merge reason:
	Conflicts in arch/x86/kernel/apic/io_apic.c

Resolved Conflicts:
	arch/x86/kernel/apic/io_apic.c

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

6 files changed, 122 insertions, 86 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index aa57c079c98..dfca210f6a1 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -61,12 +61,6 @@ unsigned int boot_cpu_physical_apicid = -1U;
 
 /*
  * The highest APIC ID seen during enumeration.
- *
- * On AMD, this determines the messaging protocol we can use: if all APIC IDs
- * are in the 0 ... 7 range, then we can use logical addressing which
- * has some performance advantages (better broadcasting).
- *
- * If there's an APIC ID above 8, we use physical addressing.
  */
 unsigned int max_physical_apicid;
 
@@ -1647,9 +1641,7 @@ int __init APIC_init_uniprocessor(void)
 #endif
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	verify_local_APIC();
 	connect_bsp_APIC();
@@ -1897,18 +1889,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
-#ifdef CONFIG_X86_32
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_INTEL:
-		if (num_processors > 8)
-			def_to_bigsmp = 1;
-		break;
-	case X86_VENDOR_AMD:
-		if (max_physical_apicid >= 8)
-			def_to_bigsmp = 1;
-	}
-#endif
-
 #if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
 	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
 	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index eacbd2b31d2..e3c3d820c32 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -240,6 +240,11 @@ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 		printk(KERN_DEBUG "system APIC only can use physical flat");
 		return 1;
 	}
+
+	if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
+		printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
+		return 1;
+	}
 #endif
 
 	return 0;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d55e43d352b..979589881c8 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1541,6 +1541,56 @@ static void __init setup_IO_APIC_irqs(void)
 }
 
 /*
+ * for the gsit that is not in first ioapic
+ * but could not use acpi_register_gsi()
+ * like some special sci in IBM x3330
+ */
+void setup_IO_APIC_irq_extra(u32 gsi)
+{
+	int apic_id = 0, pin, idx, irq;
+	int node = cpu_to_node(boot_cpu_id);
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+
+	/*
+	 * Convert 'gsi' to 'ioapic.pin'.
+	 */
+	apic_id = mp_find_ioapic(gsi);
+	if (apic_id < 0)
+		return;
+
+	pin = mp_find_ioapic_pin(apic_id, gsi);
+	idx = find_irq_entry(apic_id, pin, mp_INT);
+	if (idx == -1)
+		return;
+
+	irq = pin_2_irq(idx, apic_id, pin);
+#ifdef CONFIG_SPARSE_IRQ
+	desc = irq_to_desc(irq);
+	if (desc)
+		return;
+#endif
+	desc = irq_to_desc_alloc_node(irq, node);
+	if (!desc) {
+		printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+		return;
+	}
+
+	cfg = desc->chip_data;
+	add_pin_to_irq_node(cfg, node, apic_id, pin);
+
+	if (test_bit(pin, mp_ioapic_routing[apic_id].pin_programmed)) {
+		pr_debug("Pin %d-%d already programmed\n",
+			 mp_ioapics[apic_id].apicid, pin);
+		return;
+	}
+	set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed);
+
+	setup_IO_APIC_irq(apic_id, pin, irq, desc,
+			irq_trigger(idx), irq_polarity(idx));
+}
+
+/*
  * Set up the timer pin, possibly with the 8259A-master behind.
  */
 static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
@@ -1832,7 +1882,7 @@ __apicdebuginit(void) print_PIC(void)
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
 	v = inb(0xa1) << 8 | inb(0x21);
 	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
@@ -1846,7 +1896,7 @@ __apicdebuginit(void) print_PIC(void)
 	outb(0x0a,0xa0);
 	outb(0x0a,0x20);
 
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 
 	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
 
@@ -2436,6 +2486,13 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void)
 		cfg = irq_cfg(irq);
 		raw_spin_lock(&desc->lock);
 
+		/*
+		 * Check if the irq migration is in progress. If so, we
+		 * haven't received the cleanup request yet for this irq.
+		 */
+		if (cfg->move_in_progress)
+			goto unlock;
+
 		if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
 			goto unlock;
 
@@ -3223,12 +3280,9 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
 	}
 	raw_spin_unlock_irqrestore(&vector_lock, flags);
 
-	if (irq > 0) {
-		dynamic_irq_init(irq);
-		/* restore it, in case dynamic_irq_init clear it */
-		if (desc_new)
-			desc_new->chip_data = cfg_new;
-	}
+	if (irq > 0)
+		dynamic_irq_init_keep_chip_data(irq);
+
 	return irq;
 }
 
@@ -3250,19 +3304,12 @@ int create_irq(void)
 void destroy_irq(unsigned int irq)
 {
 	unsigned long flags;
-	struct irq_cfg *cfg;
-	struct irq_desc *desc;
 
-	/* store it, in case dynamic_irq_cleanup clear it */
-	desc = irq_to_desc(irq);
-	cfg = desc->chip_data;
-	dynamic_irq_cleanup(irq);
-	/* connect back irq_cfg */
-	desc->chip_data = cfg;
+	dynamic_irq_cleanup_keep_chip_data(irq);
 
 	free_irte(irq);
 	raw_spin_lock_irqsave(&vector_lock, flags);
-	__clear_irq_vector(irq, cfg);
+	__clear_irq_vector(irq, get_irq_chip_data(irq));
 	raw_spin_unlock_irqrestore(&vector_lock, flags);
 }
 
@@ -3829,28 +3876,6 @@ void __init probe_nr_irqs_gsi(void)
 	printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi);
 }
 
-#ifdef CONFIG_SPARSE_IRQ
-int __init arch_probe_nr_irqs(void)
-{
-	int nr;
-
-	if (nr_irqs > (NR_VECTORS * nr_cpu_ids))
-		nr_irqs = NR_VECTORS * nr_cpu_ids;
-
-	nr = nr_irqs_gsi + 8 * nr_cpu_ids;
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
-	/*
-	 * for MSI and HT dyn irq
-	 */
-	nr += nr_irqs_gsi * 64;
-#endif
-	if (nr < nr_irqs)
-		nr_irqs = nr;
-
-	return 0;
-}
-#endif
-
 static int __io_apic_set_pci_routing(struct device *dev, int irq,
 				struct io_apic_irq_attr *irq_attr)
 {
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 1a6559f6768..99d2fe01608 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -52,7 +52,32 @@ static int __init print_ipi_mode(void)
 }
 late_initcall(print_ipi_mode);
 
-void default_setup_apic_routing(void)
+void __init default_setup_apic_routing(void)
+{
+	int version = apic_version[boot_cpu_physical_apicid];
+
+	if (num_possible_cpus() > 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+
+#ifdef CONFIG_X86_BIGSMP
+	generic_bigsmp_probe();
+#endif
+
+	if (apic->setup_apic_routing)
+		apic->setup_apic_routing();
+}
+
+static void setup_apic_flat_routing(void)
 {
 #ifdef CONFIG_X86_IO_APIC
 	printk(KERN_INFO
@@ -103,7 +128,7 @@ struct apic apic_default = {
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= default_setup_apic_routing,
+	.setup_apic_routing		= setup_apic_flat_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index c4cbd3080c1..83e9be4778e 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -67,17 +67,8 @@ void __init default_setup_apic_routing(void)
 	}
 #endif
 
-	if (apic == &apic_flat) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (num_processors > 8)
-				apic = &apic_physflat;
-			break;
-		case X86_VENDOR_AMD:
-			if (max_physical_apicid >= 8)
-				apic = &apic_physflat;
-		}
-	}
+	if (apic == &apic_flat && num_possible_cpus() > 8)
+			apic = &apic_physflat;
 
 	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index d56b0efb205..21db3cbea7d 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -36,6 +36,8 @@ DEFINE_PER_CPU(int, x2apic_extra_bits);
 
 static enum uv_system_type uv_system_type;
 static u64 gru_start_paddr, gru_end_paddr;
+int uv_min_hub_revision_id;
+EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
 
 static inline bool is_GRU_range(u64 start, u64 end)
 {
@@ -55,12 +57,19 @@ static int early_get_nodeid(void)
 	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
 	node_id.v = *mmr;
 	early_iounmap(mmr, sizeof(*mmr));
+
+	/* Currently, all blades have same revision number */
+	uv_min_hub_revision_id = node_id.s.revision;
+
 	return node_id.s.node_id;
 }
 
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
+	int nodeid;
+
 	if (!strcmp(oem_id, "SGI")) {
+		nodeid = early_get_nodeid();
 		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
 		if (!strcmp(oem_table_id, "UVL"))
 			uv_system_type = UV_LEGACY_APIC;
@@ -68,7 +77,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 			uv_system_type = UV_X2APIC;
 		else if (!strcmp(oem_table_id, "UVH")) {
 			__get_cpu_var(x2apic_extra_bits) =
-				early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
+				nodeid << (UV_APIC_PNODE_SHIFT - 1);
 			uv_system_type = UV_NON_UNIQUE_APIC;
 			return 1;
 		}
@@ -374,13 +383,13 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 
 enum map_type {map_wb, map_uc};
 
-static __init void map_high(char *id, unsigned long base, int shift,
-			    int max_pnode, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int pshift,
+			int bshift, int max_pnode, enum map_type map_type)
 {
 	unsigned long bytes, paddr;
 
-	paddr = base << shift;
-	bytes = (1UL << shift) * (max_pnode + 1);
+	paddr = base << pshift;
+	bytes = (1UL << bshift) * (max_pnode + 1);
 	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
 						paddr + bytes);
 	if (map_type == map_uc)
@@ -396,7 +405,7 @@ static __init void map_gru_high(int max_pnode)
 
 	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
 	if (gru.s.enable) {
-		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+		map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
 		gru_start_paddr = ((u64)gru.s.base << shift);
 		gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
 
@@ -410,7 +419,7 @@ static __init void map_mmr_high(int max_pnode)
 
 	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
 	if (mmr.s.enable)
-		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+		map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc);
 }
 
 static __init void map_mmioh_high(int max_pnode)
@@ -420,7 +429,8 @@ static __init void map_mmioh_high(int max_pnode)
 
 	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
 	if (mmioh.s.enable)
-		map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
+		map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io,
+			max_pnode, map_uc);
 }
 
 static __init void map_low_mmrs(void)
@@ -629,8 +639,10 @@ void __init uv_system_init(void)
 	uv_rtc_init();
 
 	for_each_present_cpu(cpu) {
+		int apicid = per_cpu(x86_cpu_to_apicid, cpu);
+
 		nid = cpu_to_node(cpu);
-		pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
+		pnode = uv_apicid_to_pnode(apicid);
 		blade = boot_pnode_to_blade(pnode);
 		lcpu = uv_blade_info[blade].nr_possible_cpus;
 		uv_blade_info[blade].nr_possible_cpus++;
@@ -651,15 +663,13 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
 		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
 		uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id;
-		uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu;
+		uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid);
 		uv_node_to_blade[nid] = blade;
 		uv_cpu_to_blade[cpu] = blade;
 		max_pnode = max(pnode, max_pnode);
 
-		printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, "
-			"lcpu %d, blade %d\n",
-			cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid,
-			lcpu, blade);
+		printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, lcpu %d, blade %d\n",
+			cpu, apicid, pnode, nid, lcpu, blade);
 	}
 
 	/* Add blade/pnode info for nodes without cpus */