Merge branch 'smsc911x-armplatforms' of git://github.com/steveglen/linux-2.6

1 files changed, 154 insertions, 35 deletions

diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index d32cfb27a47..4de8f5b3d47 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -19,29 +19,77 @@
 #define PTR(x) (x << 3)
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 
+/*
+ * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
+ */
+#define DATA(offset)		(KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
+
+/* Minimal CPU state */
+#define RSP			DATA(0x0)
+#define CR0			DATA(0x8)
+#define CR3			DATA(0x10)
+#define CR4			DATA(0x18)
+
+/* other data */
+#define CP_PA_TABLE_PAGE	DATA(0x20)
+#define CP_PA_SWAP_PAGE		DATA(0x28)
+#define CP_PA_BACKUP_PAGES_MAP	DATA(0x30)
+
 	.text
 	.align PAGE_SIZE
 	.code64
 	.globl relocate_kernel
 relocate_kernel:
-	/* %rdi indirection_page
+	/*
+	 * %rdi indirection_page
 	 * %rsi page_list
 	 * %rdx start address
+	 * %rcx preserve_context
 	 */
 
+	/* Save the CPU context, used for jumping back */
+	pushq %rbx
+	pushq %rbp
+	pushq %r12
+	pushq %r13
+	pushq %r14
+	pushq %r15
+	pushf
+
+	movq	PTR(VA_CONTROL_PAGE)(%rsi), %r11
+	movq	%rsp, RSP(%r11)
+	movq	%cr0, %rax
+	movq	%rax, CR0(%r11)
+	movq	%cr3, %rax
+	movq	%rax, CR3(%r11)
+	movq	%cr4, %rax
+	movq	%rax, CR4(%r11)
+
 	/* zero out flags, and disable interrupts */
 	pushq $0
 	popfq
 
-	/* get physical address of control page now */
-	/* this is impossible after page table switch */
+	/*
+	 * get physical address of control page now
+	 * this is impossible after page table switch
+	 */
 	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
 
 	/* get physical address of page table now too */
-	movq	PTR(PA_TABLE_PAGE)(%rsi), %rcx
+	movq	PTR(PA_TABLE_PAGE)(%rsi), %r9
+
+	/* get physical address of swap page now */
+	movq	PTR(PA_SWAP_PAGE)(%rsi), %r10
+
+	/* save some information for jumping back */
+	movq	%r9, CP_PA_TABLE_PAGE(%r11)
+	movq	%r10, CP_PA_SWAP_PAGE(%r11)
+	movq	%rdi, CP_PA_BACKUP_PAGES_MAP(%r11)
 
 	/* Switch to the identity mapped page tables */
-	movq	%rcx, %cr3
+	movq	%r9, %cr3
 
 	/* setup a new stack at the end of the physical control page */
 	lea	PAGE_SIZE(%r8), %rsp
@@ -55,7 +103,8 @@ identity_mapped:
 	/* store the start address on the stack */
 	pushq   %rdx
 
-	/* Set cr0 to a known state:
+	/*
+	 * Set cr0 to a known state:
 	 *  - Paging enabled
 	 *  - Alignment check disabled
 	 *  - Write protect disabled
@@ -68,7 +117,8 @@ identity_mapped:
 	orl	$(X86_CR0_PG | X86_CR0_PE), %eax
 	movq	%rax, %cr0
 
-	/* Set cr4 to a known state:
+	/*
+	 * Set cr4 to a known state:
 	 *  - physical address extension enabled
 	 */
 	movq	$X86_CR4_PAE, %rax
@@ -78,9 +128,87 @@ identity_mapped:
 1:
 
 	/* Flush the TLB (needed?) */
-	movq	%rcx, %cr3
+	movq	%r9, %cr3
+
+	movq	%rcx, %r11
+	call	swap_pages
+
+	/*
+	 * To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB by reloading %cr3 here, it's handy,
+	 * and not processor dependent.
+	 */
+	movq	%cr3, %rax
+	movq	%rax, %cr3
+
+	/*
+	 * set all of the registers to known values
+	 * leave %rsp alone
+	 */
+
+	testq	%r11, %r11
+	jnz 1f
+	xorq	%rax, %rax
+	xorq	%rbx, %rbx
+	xorq    %rcx, %rcx
+	xorq    %rdx, %rdx
+	xorq    %rsi, %rsi
+	xorq    %rdi, %rdi
+	xorq    %rbp, %rbp
+	xorq	%r8,  %r8
+	xorq	%r9,  %r9
+	xorq	%r10, %r9
+	xorq	%r11, %r11
+	xorq	%r12, %r12
+	xorq	%r13, %r13
+	xorq	%r14, %r14
+	xorq	%r15, %r15
+
+	ret
+
+1:
+	popq	%rdx
+	leaq	PAGE_SIZE(%r10), %rsp
+	call	*%rdx
+
+	/* get the re-entry point of the peer system */
+	movq	0(%rsp), %rbp
+	call	1f
+1:
+	popq	%r8
+	subq	$(1b - relocate_kernel), %r8
+	movq	CP_PA_SWAP_PAGE(%r8), %r10
+	movq	CP_PA_BACKUP_PAGES_MAP(%r8), %rdi
+	movq	CP_PA_TABLE_PAGE(%r8), %rax
+	movq	%rax, %cr3
+	lea	PAGE_SIZE(%r8), %rsp
+	call	swap_pages
+	movq	$virtual_mapped, %rax
+	pushq	%rax
+	ret
+
+virtual_mapped:
+	movq	RSP(%r8), %rsp
+	movq	CR4(%r8), %rax
+	movq	%rax, %cr4
+	movq	CR3(%r8), %rax
+	movq	CR0(%r8), %r8
+	movq	%rax, %cr3
+	movq	%r8, %cr0
+	movq	%rbp, %rax
+
+	popf
+	popq	%r15
+	popq	%r14
+	popq	%r13
+	popq	%r12
+	popq	%rbp
+	popq	%rbx
+	ret
 
 	/* Do the copies */
+swap_pages:
 	movq	%rdi, %rcx 	/* Put the page_list in %rcx */
 	xorq	%rdi, %rdi
 	xorq	%rsi, %rsi
@@ -112,36 +240,27 @@ identity_mapped:
 	movq	%rcx,   %rsi  /* For ever source page do a copy */
 	andq	$0xfffffffffffff000, %rsi
 
+	movq	%rdi, %rdx
+	movq	%rsi, %rax
+
+	movq	%r10, %rdi
 	movq	$512,   %rcx
 	rep ; movsq
-	jmp	0b
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB by reloading %cr3 here, it's handy,
-	 * and not processor dependent.
-	 */
-	movq	%cr3, %rax
-	movq	%rax, %cr3
 
-	/* set all of the registers to known values */
-	/* leave %rsp alone */
+	movq	%rax, %rdi
+	movq	%rdx, %rsi
+	movq	$512,   %rcx
+	rep ; movsq
 
-	xorq	%rax, %rax
-	xorq	%rbx, %rbx
-	xorq    %rcx, %rcx
-	xorq    %rdx, %rdx
-	xorq    %rsi, %rsi
-	xorq    %rdi, %rdi
-	xorq    %rbp, %rbp
-	xorq	%r8,  %r8
-	xorq	%r9,  %r9
-	xorq	%r10, %r9
-	xorq	%r11, %r11
-	xorq	%r12, %r12
-	xorq	%r13, %r13
-	xorq	%r14, %r14
-	xorq	%r15, %r15
+	movq	%rdx, %rdi
+	movq	%r10, %rsi
+	movq	$512,   %rcx
+	rep ; movsq
 
+	lea	PAGE_SIZE(%rax), %rsi
+	jmp	0b
+3:
 	ret
+
+	.globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel