x86: remove the Voyager 32-bit subarch

Impact: remove unused/broken code

The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.

No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.

In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.

CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.

While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.

So remove this inactive code for now.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 128 deletions

diff --git a/arch/x86/mach-voyager/voyager_thread.c b/arch/x86/mach-voyager/voyager_thread.c
deleted file mode 100644
index 15464a20fb3..00000000000
--- a/arch/x86/mach-voyager/voyager_thread.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This module provides the machine status monitor thread for the
- * voyager architecture.  This allows us to monitor the machine
- * environment (temp, voltage, fan function) and the front panel and
- * internal UPS.  If a fault is detected, this thread takes corrective
- * action (usually just informing init)
- * */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/kmod.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-#include <linux/kthread.h>
-#include <asm/desc.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-
-struct task_struct *voyager_thread;
-static __u8 set_timeout;
-
-static int execute(const char *string)
-{
-	int ret;
-
-	char *envp[] = {
-		"HOME=/",
-		"TERM=linux",
-		"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
-		NULL,
-	};
-	char *argv[] = {
-		"/bin/bash",
-		"-c",
-		(char *)string,
-		NULL,
-	};
-
-	if ((ret =
-	     call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC)) != 0) {
-		printk(KERN_ERR "Voyager failed to run \"%s\": %i\n", string,
-		       ret);
-	}
-	return ret;
-}
-
-static void check_from_kernel(void)
-{
-	if (voyager_status.switch_off) {
-
-		/* FIXME: This should be configurable via proc */
-		execute("umask 600; echo 0 > /etc/initrunlvl; kill -HUP 1");
-	} else if (voyager_status.power_fail) {
-		VDEBUG(("Voyager daemon detected AC power failure\n"));
-
-		/* FIXME: This should be configureable via proc */
-		execute("umask 600; echo F > /etc/powerstatus; kill -PWR 1");
-		set_timeout = 1;
-	}
-}
-
-static void check_continuing_condition(void)
-{
-	if (voyager_status.power_fail) {
-		__u8 data;
-		voyager_cat_psi(VOYAGER_PSI_SUBREAD,
-				VOYAGER_PSI_AC_FAIL_REG, &data);
-		if ((data & 0x1f) == 0) {
-			/* all power restored */
-			printk(KERN_NOTICE
-			       "VOYAGER AC power restored, cancelling shutdown\n");
-			/* FIXME: should be user configureable */
-			execute
-			    ("umask 600; echo O > /etc/powerstatus; kill -PWR 1");
-			set_timeout = 0;
-		}
-	}
-}
-
-static int thread(void *unused)
-{
-	printk(KERN_NOTICE "Voyager starting monitor thread\n");
-
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(set_timeout ? HZ : MAX_SCHEDULE_TIMEOUT);
-
-		VDEBUG(("Voyager Daemon awoken\n"));
-		if (voyager_status.request_from_kernel == 0) {
-			/* probably awoken from timeout */
-			check_continuing_condition();
-		} else {
-			check_from_kernel();
-			voyager_status.request_from_kernel = 0;
-		}
-	}
-}
-
-static int __init voyager_thread_start(void)
-{
-	voyager_thread = kthread_run(thread, NULL, "kvoyagerd");
-	if (IS_ERR(voyager_thread)) {
-		printk(KERN_ERR
-		       "Voyager: Failed to create system monitor thread.\n");
-		return PTR_ERR(voyager_thread);
-	}
-	return 0;
-}
-
-static void __exit voyager_thread_stop(void)
-{
-	kthread_stop(voyager_thread);
-}
-
-module_init(voyager_thread_start);
-module_exit(voyager_thread_stop);