aboutsummaryrefslogtreecommitdiff
path: root/arch/x86_64/mm
diff options
context:
space:
mode:
authorDave Jones <davej@redhat.com>2006-04-18 17:19:55 -0500
committerDave Jones <davej@redhat.com>2006-04-18 17:19:55 -0500
commitf1f76afd71e0f17af9a35fcb649f4bab53304a4d (patch)
treea56257b13a0eda4a9b7e950c3b85adad16341b80 /arch/x86_64/mm
parent530515a06f90c0831732709efee4a99497bd2b7c (diff)
parent385910f2b275a636238f70844f1b6da9fda6f2da (diff)
Merge ../linus
Diffstat (limited to 'arch/x86_64/mm')
-rw-r--r--arch/x86_64/mm/fault.c2
-rw-r--r--arch/x86_64/mm/init.c37
-rw-r--r--arch/x86_64/mm/numa.c46
-rw-r--r--arch/x86_64/mm/srat.c170
4 files changed, 236 insertions, 19 deletions
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index 316c53de47b..55250593d8c 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -623,6 +623,6 @@ void vmalloc_sync_all(void)
static int __init enable_pagefaulttrace(char *str)
{
page_fault_trace = 1;
- return 0;
+ return 1;
}
__setup("pagefaulttrace", enable_pagefaulttrace);
diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c
index e5f7f1c3446..4ba34e95d83 100644
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86_64/mm/init.c
@@ -305,7 +305,7 @@ static void __meminit phys_pud_init(pud_t *pud, unsigned long address, unsigned
if (paddr >= end)
break;
- if (!after_bootmem && !e820_mapped(paddr, paddr+PUD_SIZE, 0)) {
+ if (!after_bootmem && !e820_any_mapped(paddr, paddr+PUD_SIZE, 0)) {
set_pud(pud, __pud(0));
continue;
}
@@ -507,9 +507,8 @@ void __init clear_kernel_mapping(unsigned long address, unsigned long size)
/*
* Memory hotplug specific functions
- * These are only for non-NUMA machines right now.
*/
-#ifdef CONFIG_MEMORY_HOTPLUG
+#if defined(CONFIG_ACPI_HOTPLUG_MEMORY) || defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)
void online_page(struct page *page)
{
@@ -520,6 +519,38 @@ void online_page(struct page *page)
num_physpages++;
}
+#ifndef CONFIG_MEMORY_HOTPLUG
+/*
+ * Memory Hotadd without sparsemem. The mem_maps have been allocated in advance,
+ * just online the pages.
+ */
+int __add_pages(struct zone *z, unsigned long start_pfn, unsigned long nr_pages)
+{
+ int err = -EIO;
+ unsigned long pfn;
+ unsigned long total = 0, mem = 0;
+ for (pfn = start_pfn; pfn < start_pfn + nr_pages; pfn++) {
+ if (pfn_valid(pfn)) {
+ online_page(pfn_to_page(pfn));
+ err = 0;
+ mem++;
+ }
+ total++;
+ }
+ if (!err) {
+ z->spanned_pages += total;
+ z->present_pages += mem;
+ z->zone_pgdat->node_spanned_pages += total;
+ z->zone_pgdat->node_present_pages += mem;
+ }
+ return err;
+}
+#endif
+
+/*
+ * Memory is added always to NORMAL zone. This means you will never get
+ * additional DMA/DMA32 memory.
+ */
int add_memory(u64 start, u64 size)
{
struct pglist_data *pgdat = NODE_DATA(0);
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index 4be82d6e2b4..cc02573a327 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -100,11 +100,30 @@ int early_pfn_to_nid(unsigned long pfn)
}
#endif
+static void * __init
+early_node_mem(int nodeid, unsigned long start, unsigned long end,
+ unsigned long size)
+{
+ unsigned long mem = find_e820_area(start, end, size);
+ void *ptr;
+ if (mem != -1L)
+ return __va(mem);
+ ptr = __alloc_bootmem_nopanic(size,
+ SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS));
+ if (ptr == 0) {
+ printk(KERN_ERR "Cannot find %lu bytes in node %d\n",
+ size, nodeid);
+ return NULL;
+ }
+ return ptr;
+}
+
/* Initialize bootmem allocator for a node */
void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
{
unsigned long start_pfn, end_pfn, bootmap_pages, bootmap_size, bootmap_start;
unsigned long nodedata_phys;
+ void *bootmap;
const int pgdat_size = round_up(sizeof(pg_data_t), PAGE_SIZE);
start = round_up(start, ZONE_ALIGN);
@@ -114,13 +133,11 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en
start_pfn = start >> PAGE_SHIFT;
end_pfn = end >> PAGE_SHIFT;
- nodedata_phys = find_e820_area(start, end, pgdat_size);
- if (nodedata_phys == -1L)
- panic("Cannot find memory pgdat in node %d\n", nodeid);
-
- Dprintk("nodedata_phys %lx\n", nodedata_phys);
+ node_data[nodeid] = early_node_mem(nodeid, start, end, pgdat_size);
+ if (node_data[nodeid] == NULL)
+ return;
+ nodedata_phys = __pa(node_data[nodeid]);
- node_data[nodeid] = phys_to_virt(nodedata_phys);
memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
NODE_DATA(nodeid)->bdata = &plat_node_bdata[nodeid];
NODE_DATA(nodeid)->node_start_pfn = start_pfn;
@@ -129,9 +146,15 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en
/* Find a place for the bootmem map */
bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
bootmap_start = round_up(nodedata_phys + pgdat_size, PAGE_SIZE);
- bootmap_start = find_e820_area(bootmap_start, end, bootmap_pages<<PAGE_SHIFT);
- if (bootmap_start == -1L)
- panic("Not enough continuous space for bootmap on node %d", nodeid);
+ bootmap = early_node_mem(nodeid, bootmap_start, end,
+ bootmap_pages<<PAGE_SHIFT);
+ if (bootmap == NULL) {
+ if (nodedata_phys < start || nodedata_phys >= end)
+ free_bootmem((unsigned long)node_data[nodeid],pgdat_size);
+ node_data[nodeid] = NULL;
+ return;
+ }
+ bootmap_start = __pa(bootmap);
Dprintk("bootmap start %lu pages %lu\n", bootmap_start, bootmap_pages);
bootmap_size = init_bootmem_node(NODE_DATA(nodeid),
@@ -142,6 +165,9 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en
reserve_bootmem_node(NODE_DATA(nodeid), nodedata_phys, pgdat_size);
reserve_bootmem_node(NODE_DATA(nodeid), bootmap_start, bootmap_pages<<PAGE_SHIFT);
+#ifdef CONFIG_ACPI_NUMA
+ srat_reserve_add_area(nodeid);
+#endif
node_set_online(nodeid);
}
@@ -335,6 +361,8 @@ __init int numa_setup(char *opt)
#ifdef CONFIG_ACPI_NUMA
if (!strncmp(opt,"noacpi",6))
acpi_numa = -1;
+ if (!strncmp(opt,"hotadd=", 7))
+ hotadd_percent = simple_strtoul(opt+7, NULL, 10);
#endif
return 1;
}
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 2eb879590dc..15ae9fcd65a 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -15,15 +15,26 @@
#include <linux/bitmap.h>
#include <linux/module.h>
#include <linux/topology.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
#include <asm/proto.h>
#include <asm/numa.h>
#include <asm/e820.h>
+#if (defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \
+ defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) \
+ && !defined(CONFIG_MEMORY_HOTPLUG)
+#define RESERVE_HOTADD 1
+#endif
+
static struct acpi_table_slit *acpi_slit;
static nodemask_t nodes_parsed __initdata;
static nodemask_t nodes_found __initdata;
static struct bootnode nodes[MAX_NUMNODES] __initdata;
+static struct bootnode nodes_add[MAX_NUMNODES] __initdata;
+static int found_add_area __initdata;
+int hotadd_percent __initdata = 10;
static u8 pxm2node[256] = { [0 ... 255] = 0xff };
/* Too small nodes confuse the VM badly. Usually they result
@@ -71,6 +82,10 @@ static __init int conflicting_nodes(unsigned long start, unsigned long end)
static __init void cutoff_node(int i, unsigned long start, unsigned long end)
{
struct bootnode *nd = &nodes[i];
+
+ if (found_add_area)
+ return;
+
if (nd->start < start) {
nd->start = start;
if (nd->end < nd->start)
@@ -90,6 +105,8 @@ static __init void bad_srat(void)
acpi_numa = -1;
for (i = 0; i < MAX_LOCAL_APIC; i++)
apicid_to_node[i] = NUMA_NO_NODE;
+ for (i = 0; i < MAX_NUMNODES; i++)
+ nodes_add[i].start = nodes[i].end = 0;
}
static __init inline int srat_disabled(void)
@@ -155,11 +172,114 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
pxm, pa->apic_id, node);
}
+#ifdef RESERVE_HOTADD
+/*
+ * Protect against too large hotadd areas that would fill up memory.
+ */
+static int hotadd_enough_memory(struct bootnode *nd)
+{
+ static unsigned long allocated;
+ static unsigned long last_area_end;
+ unsigned long pages = (nd->end - nd->start) >> PAGE_SHIFT;
+ long mem = pages * sizeof(struct page);
+ unsigned long addr;
+ unsigned long allowed;
+ unsigned long oldpages = pages;
+
+ if (mem < 0)
+ return 0;
+ allowed = (end_pfn - e820_hole_size(0, end_pfn)) * PAGE_SIZE;
+ allowed = (allowed / 100) * hotadd_percent;
+ if (allocated + mem > allowed) {
+ /* Give them at least part of their hotadd memory upto hotadd_percent
+ It would be better to spread the limit out
+ over multiple hotplug areas, but that is too complicated
+ right now */
+ if (allocated >= allowed)
+ return 0;
+ pages = (allowed - allocated + mem) / sizeof(struct page);
+ mem = pages * sizeof(struct page);
+ nd->end = nd->start + pages*PAGE_SIZE;
+ }
+ /* Not completely fool proof, but a good sanity check */
+ addr = find_e820_area(last_area_end, end_pfn<<PAGE_SHIFT, mem);
+ if (addr == -1UL)
+ return 0;
+ if (pages != oldpages)
+ printk(KERN_NOTICE "SRAT: Hotadd area limited to %lu bytes\n",
+ pages << PAGE_SHIFT);
+ last_area_end = addr + mem;
+ allocated += mem;
+ return 1;
+}
+
+/*
+ * It is fine to add this area to the nodes data it will be used later
+ * This code supports one contigious hot add area per node.
+ */
+static int reserve_hotadd(int node, unsigned long start, unsigned long end)
+{
+ unsigned long s_pfn = start >> PAGE_SHIFT;
+ unsigned long e_pfn = end >> PAGE_SHIFT;
+ int changed = 0;
+ struct bootnode *nd = &nodes_add[node];
+
+ /* I had some trouble with strange memory hotadd regions breaking
+ the boot. Be very strict here and reject anything unexpected.
+ If you want working memory hotadd write correct SRATs.
+
+ The node size check is a basic sanity check to guard against
+ mistakes */
+ if ((signed long)(end - start) < NODE_MIN_SIZE) {
+ printk(KERN_ERR "SRAT: Hotplug area too small\n");
+ return -1;
+ }
+
+ /* This check might be a bit too strict, but I'm keeping it for now. */
+ if (e820_hole_size(s_pfn, e_pfn) != e_pfn - s_pfn) {
+ printk(KERN_ERR "SRAT: Hotplug area has existing memory\n");
+ return -1;
+ }
+
+ if (!hotadd_enough_memory(&nodes_add[node])) {
+ printk(KERN_ERR "SRAT: Hotplug area too large\n");
+ return -1;
+ }
+
+ /* Looks good */
+
+ found_add_area = 1;
+ if (nd->start == nd->end) {
+ nd->start = start;
+ nd->end = end;
+ changed = 1;
+ } else {
+ if (nd->start == end) {
+ nd->start = start;
+ changed = 1;
+ }
+ if (nd->end == start) {
+ nd->end = end;
+ changed = 1;
+ }
+ if (!changed)
+ printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
+ }
+
+ if ((nd->end >> PAGE_SHIFT) > end_pfn)
+ end_pfn = nd->end >> PAGE_SHIFT;
+
+ if (changed)
+ printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end);
+ return 0;
+}
+#endif
+
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
void __init
acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
{
- struct bootnode *nd;
+ struct bootnode *nd, oldnode;
unsigned long start, end;
int node, pxm;
int i;
@@ -172,6 +292,8 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
}
if (ma->flags.enabled == 0)
return;
+ if (ma->flags.hot_pluggable && hotadd_percent == 0)
+ return;
start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
pxm = ma->proximity_domain;
@@ -181,10 +303,6 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
bad_srat();
return;
}
- /* It is fine to add this area to the nodes data it will be used later*/
- if (ma->flags.hot_pluggable == 1)
- printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n",
- start, end);
i = conflicting_nodes(start, end);
if (i == node) {
printk(KERN_WARNING
@@ -199,6 +317,7 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
return;
}
nd = &nodes[node];
+ oldnode = *nd;
if (!node_test_and_set(node, nodes_parsed)) {
nd->start = start;
nd->end = end;
@@ -208,8 +327,19 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
if (nd->end < end)
nd->end = end;
}
+
printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
nd->start, nd->end);
+
+#ifdef RESERVE_HOTADD
+ if (ma->flags.hot_pluggable && reserve_hotadd(node, start, end) < 0) {
+ /* Ignore hotadd region. Undo damage */
+ printk(KERN_NOTICE "SRAT: Hotplug region ignored\n");
+ *nd = oldnode;
+ if ((nd->start | nd->end) == 0)
+ node_clear(node, nodes_parsed);
+ }
+#endif
}
/* Sanity check to catch more bad SRATs (they are amazingly common).
@@ -225,6 +355,9 @@ static int nodes_cover_memory(void)
unsigned long e = nodes[i].end >> PAGE_SHIFT;
pxmram += e - s;
pxmram -= e820_hole_size(s, e);
+ pxmram -= nodes_add[i].end - nodes_add[i].start;
+ if ((long)pxmram < 0)
+ pxmram = 0;
}
e820ram = end_pfn - e820_hole_size(0, end_pfn);
@@ -258,7 +391,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
/* First clean up the node list */
for (i = 0; i < MAX_NUMNODES; i++) {
- cutoff_node(i, start, end);
+ cutoff_node(i, start, end);
if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE)
unparse_node(i);
}
@@ -282,6 +415,12 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
/* Finally register nodes */
for_each_node_mask(i, nodes_parsed)
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
+ /* Try again in case setup_node_bootmem missed one due
+ to missing bootmem */
+ for_each_node_mask(i, nodes_parsed)
+ if (!node_online(i))
+ setup_node_bootmem(i, nodes[i].start, nodes[i].end);
+
for (i = 0; i < NR_CPUS; i++) {
if (cpu_to_node[i] == NUMA_NO_NODE)
continue;
@@ -303,6 +442,25 @@ static int node_to_pxm(int n)
return 0;
}
+void __init srat_reserve_add_area(int nodeid)
+{
+ if (found_add_area && nodes_add[nodeid].end) {
+ u64 total_mb;
+
+ printk(KERN_INFO "SRAT: Reserving hot-add memory space "
+ "for node %d at %Lx-%Lx\n",
+ nodeid, nodes_add[nodeid].start, nodes_add[nodeid].end);
+ total_mb = (nodes_add[nodeid].end - nodes_add[nodeid].start)
+ >> PAGE_SHIFT;
+ total_mb *= sizeof(struct page);
+ total_mb >>= 20;
+ printk(KERN_INFO "SRAT: This will cost you %Lu MB of "
+ "pre-allocated memory.\n", (unsigned long long)total_mb);
+ reserve_bootmem_node(NODE_DATA(nodeid), nodes_add[nodeid].start,
+ nodes_add[nodeid].end - nodes_add[nodeid].start);
+ }
+}
+
int __node_distance(int a, int b)
{
int index;