aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorGrzegorz Bernacki <gjb@semihalf.com>2009-02-04 13:39:17 -0700
committerGrant Likely <grant.likely@secretlab.ca>2009-02-04 13:39:17 -0700
commitbdad05489fe5f7487c7a22ef311f005cb62ebbb6 (patch)
tree23a289e94043a5eea500e6b304a5a8294d5569c8 /arch
parentbfee95bb830ff0260f3e2e0b1aa6b7492573fe4d (diff)
powerpc/5200: Add support for the digsy MTC board.
Board support for the InterControl Digsy-MTC device based on the MPC5200B SoC. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/boot/dts/digsy_mtc.dts254
-rw-r--r--arch/powerpc/platforms/52xx/Kconfig7
-rw-r--r--arch/powerpc/platforms/52xx/mpc5200_simple.c1
3 files changed, 261 insertions, 1 deletions
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
new file mode 100644
index 00000000000..0e85ebf7e4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -0,0 +1,254 @@
+/*
+ * Digsy MTC board Device Tree Source
+ *
+ * Copyright (C) 2009 Semihalf
+ *
+ * Based on the CM5200 by M. Balakowicz
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "intercontrol,digsy-mtc";
+ compatible = "intercontrol,digsy-mtc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>; // 32MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ timer@610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ };
+
+ timer@620 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ };
+
+ timer@630 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ };
+
+ timer@640 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ };
+
+ timer@650 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ };
+
+ timer@660 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ };
+
+ timer@670 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ spi@f00 {
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ };
+
+ usb@1000 {
+ compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2400 { // PSC3
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ };
+
+ serial@2600 { // PSC4
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2600 0x100>;
+ interrupts = <2 11 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ fsl5200-clocking;
+
+ rtc@50 {
+ compatible = "at,24c08";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ lpb {
+ compatible = "fsl,mpc5200b-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xff000000 0x1000000>;
+
+ // 16-bit flash device at LocalPlus Bus CS0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x1000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x00200000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x00300000>;
+ };
+ partition@500000 {
+ label = "user";
+ reg = <0x00500000 0x00a00000>;
+ };
+ partition@f00000 {
+ label = "u-boot";
+ reg = <0x00f00000 0x100000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index c01db1316b0..0465e5b36e6 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -21,7 +21,12 @@ config PPC_MPC5200_SIMPLE
and if there is a PCI bus node defined in the device tree.
Boards that are compatible with this generic platform support
- are: 'tqc,tqm5200', 'promess,motionpro', 'schindler,cm5200'.
+ are:
+ intercontrol,digsy-mtc
+ phytec,pcm030
+ promess,motionpro
+ schindler,cm5200
+ tqc,tqm5200
config PPC_EFIKA
bool "bPlan Efika 5k2. MPC5200B based computer"
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index a3bda0b9f1f..d5e1471e51f 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static char *board[] __initdata = {
+ "intercontrol,digsy-mtc",
"promess,motionpro",
"phytec,pcm030",
"schindler,cm5200",