aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2008-01-07 22:18:30 +0000
committerRussell King <rmk+kernel@arm.linux.org.uk>2008-01-26 15:07:56 +0000
commit7b5dea12346f98b0624e00ef585246bfec8b0959 (patch)
treea0a04aa5101b716915e7256fca79d8db0d7fbe07 /arch
parenta10476d4ca52039a9240ac26376e15308b748b19 (diff)
[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
Wakeup sources on PXA3 are enabled at two levels. First, the MFP configuration has to be set to enable which edges a specific pin will trigger a wakeup. The pin also has to be routed to a functional unit. Lastly, the functional unit must be enabled as a wakeup source in the appropriate AD*ER registers (AD2D0ER for standby resume.) This doesn't fit well with the IRQ wake scheme - we currently do a best effort conversion from IRQ numbers to functional unit wake enable bits. For instance, there's several USB client related enable bits but there's no corresponding IRQs to determine which you'd want. Conversely, there's a single enable bit covering several functional units. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c223
-rw-r--r--arch/arm/mach-pxa/standby.S80
2 files changed, 303 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index fcb2359b386..0b2a15ed399 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,7 @@
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/hardware.h>
#include <asm/arch/pxa3xx-regs.h>
@@ -201,6 +202,225 @@ static struct clk pxa3xx_clks[] = {
PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
};
+#ifdef CONFIG_PM
+#define SLEEP_SAVE_SIZE 4
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
+static void __iomem *sram;
+static unsigned long wakeup_src;
+
+static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
+{
+ pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB);
+
+ if (CKENA & (1 << CKEN_USBH)) {
+ printk(KERN_ERR "PM: USB host clock not stopped?\n");
+ CKENA &= ~(1 << CKEN_USBH);
+ }
+// CKENA |= 1 << (CKEN_ISC & 31);
+
+ /*
+ * Low power modes require the HSIO2 clock to be enabled.
+ */
+ CKENB |= 1 << (CKEN_HSIO2 & 31);
+}
+
+static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
+{
+ CKENB &= ~(1 << (CKEN_HSIO2 & 31));
+}
+
+/*
+ * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
+ * memory controller has to be reinitialised, so we place some code
+ * in the SRAM to perform this function.
+ *
+ * We disable FIQs across the standby - otherwise, we might receive a
+ * FIQ while the SDRAM is unavailable.
+ */
+static void pxa3xx_cpu_standby(unsigned int pwrmode)
+{
+ extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+ void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
+
+ memcpy_toio(sram + 0x8000, pm_enter_standby_start,
+ pm_enter_standby_end - pm_enter_standby_start);
+
+ AD2D0SR = ~0;
+ AD2D1SR = ~0;
+ AD2D0ER = wakeup_src;
+ AD2D1ER = 0;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ local_fiq_disable();
+ fn(pwrmode);
+ local_fiq_enable();
+
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+
+ printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR);
+}
+
+static void pxa3xx_cpu_pm_enter(suspend_state_t state)
+{
+ /*
+ * Don't sleep if no wakeup sources are defined
+ */
+ if (wakeup_src == 0)
+ return;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
+ break;
+
+ case PM_SUSPEND_MEM:
+ break;
+ }
+}
+
+static int pxa3xx_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
+ .save_size = SLEEP_SAVE_SIZE,
+ .save = pxa3xx_cpu_pm_save,
+ .restore = pxa3xx_cpu_pm_restore,
+ .valid = pxa3xx_cpu_pm_valid,
+ .enter = pxa3xx_cpu_pm_enter,
+};
+
+static void __init pxa3xx_init_pm(void)
+{
+ sram = ioremap(ISRAM_START, ISRAM_SIZE);
+ if (!sram) {
+ printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
+ return;
+ }
+
+ /*
+ * Since we copy wakeup code into the SRAM, we need to ensure
+ * that it is preserved over the low power modes. Note: bit 8
+ * is undocumented in the developer manual, but must be set.
+ */
+ AD1R |= ADXR_L2 | ADXR_R0;
+ AD2R |= ADXR_L2 | ADXR_R0;
+ AD3R |= ADXR_L2 | ADXR_R0;
+
+ /*
+ * Clear the resume enable registers.
+ */
+ AD1D0ER = 0;
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+ AD3ER = 0;
+
+ pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
+}
+
+static int pxa3xx_set_wake(unsigned int irq, unsigned int on)
+{
+ unsigned long flags, mask = 0;
+
+ switch (irq) {
+ case IRQ_SSP3:
+ mask = ADXER_MFP_WSSP3;
+ break;
+ case IRQ_MSL:
+ mask = ADXER_WMSL0;
+ break;
+ case IRQ_USBH2:
+ case IRQ_USBH1:
+ mask = ADXER_WUSBH;
+ break;
+ case IRQ_KEYPAD:
+ mask = ADXER_WKP;
+ break;
+ case IRQ_AC97:
+ mask = ADXER_MFP_WAC97;
+ break;
+ case IRQ_USIM:
+ mask = ADXER_WUSIM0;
+ break;
+ case IRQ_SSP2:
+ mask = ADXER_MFP_WSSP2;
+ break;
+ case IRQ_I2C:
+ mask = ADXER_MFP_WI2C;
+ break;
+ case IRQ_STUART:
+ mask = ADXER_MFP_WUART3;
+ break;
+ case IRQ_BTUART:
+ mask = ADXER_MFP_WUART2;
+ break;
+ case IRQ_FFUART:
+ mask = ADXER_MFP_WUART1;
+ break;
+ case IRQ_MMC:
+ mask = ADXER_MFP_WMMC1;
+ break;
+ case IRQ_SSP:
+ mask = ADXER_MFP_WSSP1;
+ break;
+ case IRQ_RTCAlrm:
+ mask = ADXER_WRTC;
+ break;
+ case IRQ_SSP4:
+ mask = ADXER_MFP_WSSP4;
+ break;
+ case IRQ_TSI:
+ mask = ADXER_WTSI;
+ break;
+ case IRQ_USIM2:
+ mask = ADXER_WUSIM1;
+ break;
+ case IRQ_MMC2:
+ mask = ADXER_MFP_WMMC2;
+ break;
+ case IRQ_NAND:
+ mask = ADXER_MFP_WFLASH;
+ break;
+ case IRQ_USB2:
+ mask = ADXER_WUSB2;
+ break;
+ case IRQ_WAKEUP0:
+ mask = ADXER_WEXTWAKE0;
+ break;
+ case IRQ_WAKEUP1:
+ mask = ADXER_WEXTWAKE1;
+ break;
+ case IRQ_MMC3:
+ mask = ADXER_MFP_GEN12;
+ break;
+ }
+
+ local_irq_save(flags);
+ if (on)
+ wakeup_src |= mask;
+ else
+ wakeup_src &= ~mask;
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void pxa3xx_init_irq_pm(void)
+{
+ pxa_init_irq_set_wake(pxa3xx_set_wake);
+}
+
+#else
+static inline void pxa3xx_init_pm(void) {}
+static inline void pxa3xx_init_irq_pm(void) {}
+#endif
+
void __init pxa3xx_init_irq(void)
{
/* enable CP6 access */
@@ -212,6 +432,7 @@ void __init pxa3xx_init_irq(void)
pxa_init_irq_low();
pxa_init_irq_high();
pxa_init_irq_gpio(128);
+ pxa3xx_init_irq_pm();
}
/*
@@ -241,6 +462,8 @@ static int __init pxa3xx_init(void)
if ((ret = pxa_init_dma(32)))
return ret;
+ pxa3xx_init_pm();
+
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
return 0;
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 434a6ab0eca..167412e6bec 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -32,3 +32,83 @@ ENTRY(pxa_cpu_standby)
mov pc, lr
#endif
+
+#ifdef CONFIG_PXA3xx
+
+#define MDCNFG 0x0000
+#define MDCNFG_DMCEN (1 << 30)
+#define DDR_HCAL 0x0060
+#define DDR_HCAL_HCRNG 0x1f
+#define DDR_HCAL_HCPROG (1 << 28)
+#define DDR_HCAL_HCEN (1 << 31)
+#define DMCIER 0x0070
+#define DMCIER_EDLP (1 << 29)
+#define DMCISR 0x0078
+#define RCOMP 0x0100
+#define RCOMP_SWEVAL (1 << 31)
+
+ENTRY(pm_enter_standby_start)
+ mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG)
+ add r1, r1, #0x00100000
+
+ /*
+ * Preload the TLB entry for accessing the dynamic memory
+ * controller registers. Note that page table lookups will
+ * fail until the dynamic memory controller has been
+ * reinitialised - and that includes MMU page table walks.
+ * This also means that only the dynamic memory controller
+ * can be reliably accessed in the code following standby.
+ */
+ ldr r2, [r1] @ Dummy read MDCNFG
+
+ mcr p14, 0, r0, c7, c0, 0
+ .rept 8
+ nop
+ .endr
+
+ ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN
+ bic r0, r0, #DDR_HCAL_HCEN
+ str r0, [r1, #DDR_HCAL]
+1: ldr r0, [r1, #DDR_HCAL]
+ tst r0, #DDR_HCAL_HCEN
+ bne 1b
+
+ ldr r0, [r1, #RCOMP] @ Initiate RCOMP
+ orr r0, r0, #RCOMP_SWEVAL
+ str r0, [r1, #RCOMP]
+
+ mov r0, #~0 @ Clear interrupts
+ str r0, [r1, #DMCISR]
+
+ ldr r0, [r1, #DMCIER] @ set DMIER[EDLP]
+ orr r0, r0, #DMCIER_EDLP
+ str r0, [r1, #DMCIER]
+
+ ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
+ bic r0, r0, #DDR_HCAL_HCRNG
+ orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
+ str r0, [r1, #DDR_HCAL]
+
+1: ldr r0, [r1, #DMCISR]
+ tst r0, #DMCIER_EDLP
+ beq 1b
+
+ ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN]
+ orr r0, r0, #MDCNFG_DMCEN
+ str r0, [r1, #MDCNFG]
+1: ldr r0, [r1, #MDCNFG]
+ tst r0, #MDCNFG_DMCEN
+ beq 1b
+
+ ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG]
+ orr r0, r0, #2 @ HCRNG
+ str r0, [r1, #DDR_HCAL]
+
+ ldr r0, [r1, #DMCIER] @ Clear the interrupt
+ bic r0, r0, #0x20000000
+ str r0, [r1, #DMCIER]
+
+ mov pc, lr
+ENTRY(pm_enter_standby_end)
+
+#endif