aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorKumar Gala <galak@kernel.crashing.org>2007-02-08 00:41:56 -0600
committerKumar Gala <galak@kernel.crashing.org>2007-02-08 00:41:56 -0600
commit135637aa781a0480ba4ef2d3ad18fae408ace874 (patch)
treed28d3765b2cb135968b14a0fd75ef2c2b4f1e248 /arch
parent97c5a20ae68774b4c9246c4657be0d88317f103f (diff)
parentd003e7a1a569501cbe9a5ca14748177498c4893a (diff)
Merge branch 'master' into 83xx
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/Kconfig19
-rw-r--r--arch/powerpc/kernel/irq.c6
-rw-r--r--arch/powerpc/kernel/kprobes.c8
-rw-r--r--arch/powerpc/kernel/lparcfg.c11
-rw-r--r--arch/powerpc/kernel/setup_32.c1
-rw-r--r--arch/powerpc/kernel/traps.c109
-rw-r--r--arch/powerpc/lib/Makefile2
-rw-r--r--arch/powerpc/lib/rheap.c3
-rw-r--r--arch/powerpc/mm/mem.c4
-rw-r--r--arch/powerpc/platforms/52xx/Makefile1
-rw-r--r--arch/powerpc/platforms/52xx/lite5200.c6
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_pci.c412
-rw-r--r--arch/powerpc/platforms/pseries/firmware.c1
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c22
-rw-r--r--arch/powerpc/xmon/ppc-opc.c7
-rw-r--r--arch/powerpc/xmon/spu-opc.c4
-rw-r--r--arch/ppc/8xx_io/cs4218_tdm.c1
-rw-r--r--arch/ppc/lib/rheap.c3
-rw-r--r--arch/ppc/syslib/m8260_pci_erratum9.c3
-rw-r--r--arch/ppc/syslib/m8xx_setup.c2
-rw-r--r--arch/ppc/xmon/ppc-opc.c7
21 files changed, 558 insertions, 74 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index aeb53096acf..abc6bd2f858 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -436,6 +436,21 @@ config PPC_MPC52xx
bool
default n
+config PPC_MPC5200
+ bool
+ select PPC_MPC52xx
+ default n
+
+config PPC_MPC5200_BUGFIX
+ bool "MPC5200 (L25R) bugfix support"
+ depends on PPC_MPC5200
+ default n
+ help
+ Enable workarounds for original MPC5200 errata. This is not required
+ for MPC5200B based boards.
+
+ It is safe to say 'Y' here
+
config PPC_EFIKA
bool "bPlan Efika 5k2. MPC5200B based computer"
depends on PPC_MULTIPLATFORM && PPC32
@@ -448,7 +463,7 @@ config PPC_EFIKA
config PPC_LITE5200
bool "Freescale Lite5200 Eval Board"
depends on PPC_MULTIPLATFORM && PPC32
- select PPC_MPC52xx
+ select PPC_MPC5200
default n
config PPC_PMAC
@@ -1206,7 +1221,7 @@ source "arch/powerpc/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on PPC64 && KALLSYMS && EXPERIMENTAL && MODULES
+ depends on !BOOKE && !4xx && KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 34dc37e0e36..919fbf56849 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -281,10 +281,10 @@ void do_IRQ(struct pt_regs *regs)
/*
* Every platform is required to implement ppc_md.get_irq.
- * This function will either return an irq number or -1 to
+ * This function will either return an irq number or NO_IRQ to
* indicate there are no more pending.
- * The value -2 is for buggy hardware and means that this IRQ
- * has already been handled. -- Tom
+ * The value NO_IRQ_IGNORE is for buggy hardware and means that this
+ * IRQ has already been handled. -- Tom
*/
irq = ppc_md.get_irq();
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 4657563f881..dd2886f97e9 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -46,8 +46,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
if ((unsigned long)p->addr & 0x03) {
printk("Attempt to register kprobe at an unaligned address\n");
ret = -EINVAL;
- } else if (IS_MTMSRD(insn) || IS_RFID(insn)) {
- printk("Cannot register a kprobe on rfid or mtmsrd\n");
+ } else if (IS_MTMSRD(insn) || IS_RFID(insn) || IS_RFI(insn)) {
+ printk("Cannot register a kprobe on rfi/rfid or mtmsr[d]\n");
ret = -EINVAL;
}
@@ -483,8 +483,12 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs));
/* setup return addr to the jprobe handler routine */
+#ifdef CONFIG_PPC64
regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry);
regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc);
+#else
+ regs->nip = (unsigned long)jp->entry;
+#endif
return 1;
}
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 41c05dcd68f..0de5a08cf9b 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -439,6 +439,10 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
ssize_t retval = -ENOMEM;
+ if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
+ firmware_has_feature(FW_FEATURE_ISERIES))
+ return -EINVAL;
+
kbuf = kmalloc(count, GFP_KERNEL);
if (!kbuf)
goto out;
@@ -517,7 +521,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
static ssize_t lparcfg_write(struct file *file, const char __user * buf,
size_t count, loff_t * off)
{
- return count;
+ return -EINVAL;
}
#endif /* CONFIG_PPC_PSERIES */
@@ -570,6 +574,7 @@ static int lparcfg_open(struct inode *inode, struct file *file)
struct file_operations lparcfg_fops = {
.owner = THIS_MODULE,
.read = seq_read,
+ .write = lparcfg_write,
.open = lparcfg_open,
.release = single_release,
};
@@ -581,10 +586,8 @@ int __init lparcfg_init(void)
/* Allow writing if we have FW_FEATURE_SPLPAR */
if (firmware_has_feature(FW_FEATURE_SPLPAR) &&
- !firmware_has_feature(FW_FEATURE_ISERIES)) {
- lparcfg_fops.write = lparcfg_write;
+ !firmware_has_feature(FW_FEATURE_ISERIES))
mode |= S_IWUSR;
- }
ent = create_proc_entry("ppc64/lparcfg", mode, NULL);
if (ent) {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 61c65d19ef0..6a19fa40dce 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -65,6 +65,7 @@ int have_of = 1;
#ifdef CONFIG_VGA_CONSOLE
unsigned long vgacon_remap_base;
+EXPORT_SYMBOL(vgacon_remap_base);
#endif
/*
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 6915b91868b..dcc6f159fd9 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -535,34 +535,40 @@ static void emulate_single_step(struct pt_regs *regs)
}
}
-static void parse_fpe(struct pt_regs *regs)
+static inline int __parse_fpscr(unsigned long fpscr)
{
- int code = 0;
- unsigned long fpscr;
-
- flush_fp_to_thread(current);
-
- fpscr = current->thread.fpscr.val;
+ int ret = 0;
/* Invalid operation */
if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX))
- code = FPE_FLTINV;
+ ret = FPE_FLTINV;
/* Overflow */
else if ((fpscr & FPSCR_OE) && (fpscr & FPSCR_OX))
- code = FPE_FLTOVF;
+ ret = FPE_FLTOVF;
/* Underflow */
else if ((fpscr & FPSCR_UE) && (fpscr & FPSCR_UX))
- code = FPE_FLTUND;
+ ret = FPE_FLTUND;
/* Divide by zero */
else if ((fpscr & FPSCR_ZE) && (fpscr & FPSCR_ZX))
- code = FPE_FLTDIV;
+ ret = FPE_FLTDIV;
/* Inexact result */
else if ((fpscr & FPSCR_XE) && (fpscr & FPSCR_XX))
- code = FPE_FLTRES;
+ ret = FPE_FLTRES;
+
+ return ret;
+}
+
+static void parse_fpe(struct pt_regs *regs)
+{
+ int code = 0;
+
+ flush_fp_to_thread(current);
+
+ code = __parse_fpscr(current->thread.fpscr.val);
_exception(SIGFPE, regs, code, regs->nip);
}
@@ -739,20 +745,7 @@ void __kprobes program_check_exception(struct pt_regs *regs)
extern int do_mathemu(struct pt_regs *regs);
/* We can now get here via a FP Unavailable exception if the core
- * has no FPU, in that case no reason flags will be set */
-#ifdef CONFIG_MATH_EMULATION
- /* (reason & REASON_ILLEGAL) would be the obvious thing here,
- * but there seems to be a hardware bug on the 405GP (RevD)
- * that means ESR is sometimes set incorrectly - either to
- * ESR_DST (!?) or 0. In the process of chasing this with the
- * hardware people - not sure if it can happen on any illegal
- * instruction or only on FP instructions, whether there is a
- * pattern to occurences etc. -dgibson 31/Mar/2003 */
- if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
- emulate_single_step(regs);
- return;
- }
-#endif /* CONFIG_MATH_EMULATION */
+ * has no FPU, in that case the reason flags will be 0 */
if (reason & REASON_FP) {
/* IEEE FP exception */
@@ -778,6 +771,31 @@ void __kprobes program_check_exception(struct pt_regs *regs)
local_irq_enable();
+#ifdef CONFIG_MATH_EMULATION
+ /* (reason & REASON_ILLEGAL) would be the obvious thing here,
+ * but there seems to be a hardware bug on the 405GP (RevD)
+ * that means ESR is sometimes set incorrectly - either to
+ * ESR_DST (!?) or 0. In the process of chasing this with the
+ * hardware people - not sure if it can happen on any illegal
+ * instruction or only on FP instructions, whether there is a
+ * pattern to occurences etc. -dgibson 31/Mar/2003 */
+ switch (do_mathemu(regs)) {
+ case 0:
+ emulate_single_step(regs);
+ return;
+ case 1: {
+ int code = 0;
+ code = __parse_fpscr(current->thread.fpscr.val);
+ _exception(SIGFPE, regs, code, regs->nip);
+ return;
+ }
+ case -EFAULT:
+ _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+ return;
+ }
+ /* fall through on any other errors */
+#endif /* CONFIG_MATH_EMULATION */
+
/* Try to emulate it if we should. */
if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
switch (emulate_instruction(regs)) {
@@ -891,18 +909,39 @@ void SoftwareEmulation(struct pt_regs *regs)
#ifdef CONFIG_MATH_EMULATION
errcode = do_mathemu(regs);
+
+ switch (errcode) {
+ case 0:
+ emulate_single_step(regs);
+ return;
+ case 1: {
+ int code = 0;
+ code = __parse_fpscr(current->thread.fpscr.val);
+ _exception(SIGFPE, regs, code, regs->nip);
+ return;
+ }
+ case -EFAULT:
+ _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+ return;
+ default:
+ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+ return;
+ }
+
#else
errcode = Soft_emulate_8xx(regs);
-#endif
- if (errcode) {
- if (errcode > 0)
- _exception(SIGFPE, regs, 0, 0);
- else if (errcode == -EFAULT)
- _exception(SIGSEGV, regs, 0, 0);
- else
- _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
- } else
+ switch (errcode) {
+ case 0:
emulate_single_step(regs);
+ return;
+ case 1:
+ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+ return;
+ case -EFAULT:
+ _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+ return;
+ }
+#endif
}
#endif /* CONFIG_8xx */
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index e2d414160c8..4b1ba49fbd9 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -16,11 +16,11 @@ obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \
strcase.o
obj-$(CONFIG_QUICC_ENGINE) += rheap.o
obj-$(CONFIG_XMON) += sstep.o
+obj-$(CONFIG_KPROBES) += sstep.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
-obj-$(CONFIG_DEBUG_KERNEL) += sstep.o
endif
# Temporary hack until we have migrated to asm-powerpc
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 4bbda6b2be4..6c5c5dd183e 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -14,6 +14,7 @@
*/
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
@@ -671,7 +672,7 @@ void rh_dump(rh_info_t * info)
int maxnr;
int i, nr;
- maxnr = sizeof(st) / sizeof(st[0]);
+ maxnr = ARRAY_SIZE(st);
printk(KERN_INFO
"info @0x%p (%d slots empty / %d max)\n",
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index c85eda63d2b..77b4637097e 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -61,10 +61,6 @@ unsigned long memory_limit;
extern void hash_preload(struct mm_struct *mm, unsigned long ea,
unsigned long access, unsigned long trap);
-/*
- * This is called by /dev/mem to know if a given address has to
- * be mapped non-cacheable or not
- */
int page_is_ram(unsigned long pfn)
{
unsigned long paddr = (pfn << PAGE_SHIFT);
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index a46184a0c75..795b713ec9e 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -3,6 +3,7 @@
#
ifeq ($(CONFIG_PPC_MERGE),y)
obj-y += mpc52xx_pic.o mpc52xx_common.o
+obj-$(CONFIG_PCI) += mpc52xx_pci.o
endif
obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 0f21bab33f6..cdb16bfa6ca 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -107,6 +107,12 @@ static void __init lite52xx_setup_arch(void)
mpc52xx_setup_cpu(); /* Generic */
lite52xx_setup_cpu(); /* Platorm specific */
+#ifdef CONFIG_PCI
+ np = of_find_node_by_type(np, "pci");
+ if (np)
+ mpc52xx_add_bridge(np);
+#endif
+
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
new file mode 100644
index 00000000000..faf161bdbc1
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -0,0 +1,412 @@
+/*
+ * PCI code for the Freescale MPC52xx embedded CPU.
+ *
+ * Copyright (C) 2006 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#undef DEBUG
+
+#include <asm/pci.h>
+#include <asm/mpc52xx.h>
+#include <asm/delay.h>
+#include <asm/machdep.h>
+#include <linux/kernel.h>
+
+
+/* ======================================================================== */
+/* PCI windows config */
+/* ======================================================================== */
+
+#define MPC52xx_PCI_TARGET_IO 0xf0000000
+#define MPC52xx_PCI_TARGET_MEM 0x00000000
+
+
+/* ======================================================================== */
+/* Structures mapping & Defines for PCI Unit */
+/* ======================================================================== */
+
+#define MPC52xx_PCI_GSCR_BM 0x40000000
+#define MPC52xx_PCI_GSCR_PE 0x20000000
+#define MPC52xx_PCI_GSCR_SE 0x10000000
+#define MPC52xx_PCI_GSCR_XLB2PCI_MASK 0x07000000
+#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT 24
+#define MPC52xx_PCI_GSCR_IPG2PCI_MASK 0x00070000
+#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT 16
+#define MPC52xx_PCI_GSCR_BME 0x00004000
+#define MPC52xx_PCI_GSCR_PEE 0x00002000
+#define MPC52xx_PCI_GSCR_SEE 0x00001000
+#define MPC52xx_PCI_GSCR_PR 0x00000001
+
+
+#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size) \
+ ( ( (proc_ad) & 0xff000000 ) | \
+ ( (((size) - 1) >> 8) & 0x00ff0000 ) | \
+ ( ((pci_ad) >> 16) & 0x0000ff00 ) )
+
+#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2) (((win0) << 24) | \
+ ((win1) << 16) | \
+ ((win2) << 8))
+
+#define MPC52xx_PCI_IWCR_DISABLE 0x0
+#define MPC52xx_PCI_IWCR_ENABLE 0x1
+#define MPC52xx_PCI_IWCR_READ 0x0
+#define MPC52xx_PCI_IWCR_READ_LINE 0x2
+#define MPC52xx_PCI_IWCR_READ_MULTI 0x4
+#define MPC52xx_PCI_IWCR_MEM 0x0
+#define MPC52xx_PCI_IWCR_IO 0x8
+
+#define MPC52xx_PCI_TCR_P 0x01000000
+#define MPC52xx_PCI_TCR_LD 0x00010000
+
+#define MPC52xx_PCI_TBATR_DISABLE 0x0
+#define MPC52xx_PCI_TBATR_ENABLE 0x1
+
+struct mpc52xx_pci {
+ u32 idr; /* PCI + 0x00 */
+ u32 scr; /* PCI + 0x04 */
+ u32 ccrir; /* PCI + 0x08 */
+ u32 cr1; /* PCI + 0x0C */
+ u32 bar0; /* PCI + 0x10 */
+ u32 bar1; /* PCI + 0x14 */
+ u8 reserved1[16]; /* PCI + 0x18 */
+ u32 ccpr; /* PCI + 0x28 */
+ u32 sid; /* PCI + 0x2C */
+ u32 erbar; /* PCI + 0x30 */
+ u32 cpr; /* PCI + 0x34 */
+ u8 reserved2[4]; /* PCI + 0x38 */
+ u32 cr2; /* PCI + 0x3C */
+ u8 reserved3[32]; /* PCI + 0x40 */
+ u32 gscr; /* PCI + 0x60 */
+ u32 tbatr0; /* PCI + 0x64 */
+ u32 tbatr1; /* PCI + 0x68 */
+ u32 tcr; /* PCI + 0x6C */
+ u32 iw0btar; /* PCI + 0x70 */
+ u32 iw1btar; /* PCI + 0x74 */
+ u32 iw2btar; /* PCI + 0x78 */
+ u8 reserved4[4]; /* PCI + 0x7C */
+ u32 iwcr; /* PCI + 0x80 */
+ u32 icr; /* PCI + 0x84 */
+ u32 isr; /* PCI + 0x88 */
+ u32 arb; /* PCI + 0x8C */
+ u8 reserved5[104]; /* PCI + 0x90 */
+ u32 car; /* PCI + 0xF8 */
+ u8 reserved6[4]; /* PCI + 0xFC */
+};
+
+
+/* ======================================================================== */
+/* PCI configuration acess */
+/* ======================================================================== */
+
+static int
+mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ u32 value;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ out_be32(hose->cfg_addr,
+ (1 << 31) |
+ ((bus->number - hose->bus_offset) << 16) |
+ (devfn << 8) |
+ (offset & 0xfc));
+ mb();
+
+#if defined(CONFIG_PPC_MPC5200_BUGFIX)
+ if (bus->number != hose->bus_offset) {
+ /* workaround for the bug 435 of the MPC5200 (L25R);
+ * Don't do 32 bits config access during type-1 cycles */
+ switch (len) {
+ case 1:
+ value = in_8(((u8 __iomem *)hose->cfg_data) +
+ (offset & 3));
+ break;
+ case 2:
+ value = in_le16(((u16 __iomem *)hose->cfg_data) +
+ ((offset>>1) & 1));
+ break;
+
+ default:
+ value = in_le16((u16 __iomem *)hose->cfg_data) |
+ (in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16);
+ break;
+ }
+ }
+ else
+#endif
+ {
+ value = in_le32(hose->cfg_data);
+
+ if (len != 4) {
+ value >>= ((offset & 0x3) << 3);
+ value &= 0xffffffff >> (32 - (len << 3));
+ }
+ }
+
+ *val = value;
+
+ out_be32(hose->cfg_addr, 0);
+ mb();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ u32 value, mask;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ out_be32(hose->cfg_addr,
+ (1 << 31) |
+ ((bus->number - hose->bus_offset) << 16) |
+ (devfn << 8) |
+ (offset & 0xfc));
+ mb();
+
+#if defined(CONFIG_PPC_MPC5200_BUGFIX)
+ if (bus->number != hose->bus_offset) {
+ /* workaround for the bug 435 of the MPC5200 (L25R);
+ * Don't do 32 bits config access during type-1 cycles */
+ switch (len) {
+ case 1:
+ out_8(((u8 __iomem *)hose->cfg_data) +
+ (offset & 3), val);
+ break;
+ case 2:
+ out_le16(((u16 __iomem *)hose->cfg_data) +
+ ((offset>>1) & 1), val);
+ break;
+
+ default:
+ out_le16((u16 __iomem *)hose->cfg_data,
+ (u16)val);
+ out_le16(((u16 __iomem *)hose->cfg_data) + 1,
+ (u16)(val>>16));
+ break;
+ }
+ }
+ else
+#endif
+ {
+ if (len != 4) {
+ value = in_le32(hose->cfg_data);
+
+ offset = (offset & 0x3) << 3;
+ mask = (0xffffffff >> (32 - (len << 3)));
+ mask <<= offset;
+
+ value &= ~mask;
+ val = value | ((val << offset) & mask);
+ }
+
+ out_le32(hose->cfg_data, val);
+ }
+ mb();
+
+ out_be32(hose->cfg_addr, 0);
+ mb();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mpc52xx_pci_ops = {
+ .read = mpc52xx_pci_read_config,
+ .write = mpc52xx_pci_write_config
+};
+
+
+/* ======================================================================== */
+/* PCI setup */
+/* ======================================================================== */
+
+static void __init
+mpc52xx_pci_setup(struct pci_controller *hose,
+ struct mpc52xx_pci __iomem *pci_regs)
+{
+ struct resource *res;
+ u32 tmp;
+ int iwcr0 = 0, iwcr1 = 0, iwcr2 = 0;
+
+ pr_debug("mpc52xx_pci_setup(hose=%p, pci_regs=%p)\n", hose, pci_regs);
+
+ /* pci_process_bridge_OF_ranges() found all our addresses for us;
+ * now store them in the right places */
+ hose->cfg_addr = &pci_regs->car;
+ hose->cfg_data = hose->io_base_virt;
+
+ /* Control regs */
+ tmp = in_be32(&pci_regs->scr);
+ tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ out_be32(&pci_regs->scr, tmp);
+
+ /* Memory windows */
+ res = &hose->mem_resources[0];
+ if (res->flags) {
+ pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n",
+ res->start, res->end, res->flags);
+ out_be32(&pci_regs->iw0btar,
+ MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
+ res->end - res->start + 1));
+ iwcr0 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM;
+ if (res->flags & IORESOURCE_PREFETCH)
+ iwcr0 |= MPC52xx_PCI_IWCR_READ_MULTI;
+ else
+ iwcr0 |= MPC52xx_PCI_IWCR_READ;
+ }
+
+ res = &hose->mem_resources[1];
+ if (res->flags) {
+ pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n",
+ res->start, res->end, res->flags);
+ out_be32(&pci_regs->iw1btar,
+ MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
+ res->end - res->start + 1));
+ iwcr1 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM;
+ if (res->flags & IORESOURCE_PREFETCH)
+ iwcr1 |= MPC52xx_PCI_IWCR_READ_MULTI;
+ else
+ iwcr1 |= MPC52xx_PCI_IWCR_READ;
+ }
+
+ /* IO resources */
+ res = &hose->io_resource;
+ if (!res) {
+ printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
+ return;
+ }
+ pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} "
+ ".io_base_phys=0x%p\n",
+ res->start, res->end, res->flags, (void*)hose->io_base_phys);
+ out_be32(&pci_regs->iw2btar,
+ MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys,
+ res->start,
+ res->end - res->start + 1));
+ iwcr2 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_IO;
+
+ /* Set all the IWCR fields at once; they're in the same reg */
+ out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2));
+
+ out_be32(&pci_regs->tbatr0,
+ MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
+ out_be32(&pci_regs->tbatr1,
+ MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
+
+ out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+
+ tmp = in_be32(&pci_regs->gscr);
+#if 0
+ /* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
+ /* Not necessary and can be a bad thing if for example the bootloader
+ is displaying a splash screen or ... Just left here for
+ documentation purpose if anyone need it */
+ out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
+ udelay(50);
+#endif
+
+ /* Make sure the PCI bridge is out of reset */
+ out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR);
+}
+
+static void
+mpc52xx_pci_fixup_resources(struct pci_dev *dev)
+{
+ int i;
+
+ pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n",
+ dev->vendor, dev->device);
+
+ /* We don't rely on boot loader for PCI and resets all
+ devices */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ struct resource *res = &dev->resource[i];
+ if (res->end > res->start) { /* Only valid resources */
+ res->end -= res->start;
+ res->start = 0;
+ res->flags |= IORESOURCE_UNSET;
+ }
+ }
+
+ /* The PCI Host bridge of MPC52xx has a prefetch memory resource
+ fixed to 1Gb. Doesn't fit in the resource system so we remove it */
+ if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
+ ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
+ || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
+ struct resource *res = &dev->resource[1];
+ res->start = res->end = res->flags = 0;
+ }
+}
+
+int __init
+mpc52xx_add_bridge(struct device_node *node)
+{
+ int len;
+ struct mpc52xx_pci __iomem *pci_regs;
+ struct pci_controller *hose;
+ const int *bus_range;
+ struct resource rsrc;
+
+ pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name);
+
+ pci_assign_all_buses = 1;
+
+ if (of_address_to_resource(node, 0, &rsrc) != 0) {
+ printk(KERN_ERR "Can't get %s resources\n", node->full_name);
+ return -EINVAL;
+ }
+
+ bus_range = get_property(node, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n",
+ node->full_name);
+ bus_range = NULL;
+ }
+
+ /* There are some PCI quirks on the 52xx, register the hook to
+ * fix them. */
+ ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
+
+ /* Alloc and initialize the pci controller. Values in the device
+ * tree are needed to configure the 52xx PCI controller. Rather
+ * than parse the tree here, let pci_process_bridge_OF_ranges()
+ * do it for us and extract the values after the fact */
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+
+ hose->arch_data = node;
+ hose->set_cfg_type = 1;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ hose->bus_offset = 0;
+ hose->ops = &mpc52xx_pci_ops;
+
+ pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
+ if (!pci_regs)
+ return -ENOMEM;
+
+ pci_process_bridge_OF_ranges(hose, node, 1);
+
+ /* Finish setting up PCI using values obtained by
+ * pci_proces_bridge_OF_ranges */
+ mpc52xx_pci_setup(hose, pci_regs);
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 1c7b2baa5f7..90522e3c9d4 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -59,6 +59,7 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = {
{FW_FEATURE_XDABR, "hcall-xdabr"},
{FW_FEATURE_MULTITCE, "hcall-multi-tce"},
{FW_FEATURE_SPLPAR, "hcall-splpar"},
+ {FW_FEATURE_BULK_REMOVE, "hcall-bulk"},
};
/* Build up the firmware features bitmask using the contents of
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 5a684fbd8f2..7496005566e 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -516,7 +516,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
{
unsigned long i, pix, rc;
- unsigned long flags;
+ unsigned long flags = 0;
struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
unsigned long param[9];
@@ -540,16 +540,22 @@ static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += hidx & _PTEIDX_GROUP_IX;
- param[pix] = HBR_REQUEST | HBR_AVPN | slot;
- param[pix+1] = hpte_encode_v(va, psize) & HPTE_V_AVPN;
- pix += 2;
- if (pix == 8) {
- rc = plpar_hcall9(H_BULK_REMOVE, param,
+ if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) {
+ pSeries_lpar_hpte_invalidate(slot, va, psize,
+ local);
+ } else {
+ param[pix] = HBR_REQUEST | HBR_AVPN | slot;
+ param[pix+1] = hpte_encode_v(va, psize) &
+ HPTE_V_AVPN;
+ pix += 2;
+ if (pix == 8) {
+ rc = plpar_hcall9(H_BULK_REMOVE, param,
param[0], param[1], param[2],
param[3], param[4], param[5],
param[6], param[7]);
- BUG_ON(rc != H_SUCCESS);
- pix = 0;
+ BUG_ON(rc != H_SUCCESS);
+ pix = 0;
+ }
}
} pte_iterate_hashed_end();
}
diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c
index 5d841f4b353..af3780e52e7 100644
--- a/arch/powerpc/xmon/ppc-opc.c
+++ b/arch/powerpc/xmon/ppc-opc.c
@@ -21,6 +21,7 @@
02110-1301, USA. */
#include <linux/stddef.h>
+#include <linux/kernel.h>
#include "nonstdio.h"
#include "ppc.h"
@@ -4932,8 +4933,7 @@ const struct powerpc_opcode powerpc_opcodes[] = {
};
-const int powerpc_num_opcodes =
- sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]);
+const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
/* The macro table. This is only used by the assembler. */
@@ -4989,5 +4989,4 @@ const struct powerpc_macro powerpc_macros[] = {
{ "clrlslwi.",4, PPCCOM, "rlwinm. %0,%1,%3,(%2)-(%3),31-(%3)" },
};
-const int powerpc_num_macros =
- sizeof (powerpc_macros) / sizeof (powerpc_macros[0]);
+const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
diff --git a/arch/powerpc/xmon/spu-opc.c b/arch/powerpc/xmon/spu-opc.c
index efffde9edc6..530df3d6d7b 100644
--- a/arch/powerpc/xmon/spu-opc.c
+++ b/arch/powerpc/xmon/spu-opc.c
@@ -18,6 +18,7 @@
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
+#include <linux/kernel.h>
#include "spu.h"
/* This file holds the Spu opcode table */
@@ -40,5 +41,4 @@ const struct spu_opcode spu_opcodes[] = {
#undef APUOPFB
};
-const int spu_num_opcodes =
- sizeof (spu_opcodes) / sizeof (spu_opcodes[0]);
+const int spu_num_opcodes = ARRAY_SIZE(spu_opcodes);
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
index b7bb5f0b3c5..684ed04eb8b 100644
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -1379,7 +1379,6 @@ static void cs_nosound(unsigned long xx)
}
static DEFINE_TIMER(beep_timer, cs_nosound, 0, 0);
-};
static void cs_mksound(unsigned int hz, unsigned int ticks)
{
diff --git a/arch/ppc/lib/rheap.c b/arch/ppc/lib/rheap.c
index 31e511856dc..d40700795a9 100644
--- a/arch/ppc/lib/rheap.c
+++ b/arch/ppc/lib/rheap.c
@@ -14,6 +14,7 @@
*/
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
@@ -654,7 +655,7 @@ void rh_dump(rh_info_t * info)
int maxnr;
int i, nr;
- maxnr = sizeof(st) / sizeof(st[0]);
+ maxnr = ARRAY_SIZE(st);
printk(KERN_INFO
"info @0x%p (%d slots empty / %d max)\n",
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
index 5475709ce07..ebb8c8f8f30 100644
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ b/arch/ppc/syslib/m8260_pci_erratum9.c
@@ -105,7 +105,8 @@ void idma_pci9_init(void)
idma_reg[IDMA_CHAN].idmr = 0; /* mask all IDMA interrupts */
idma_reg[IDMA_CHAN].idsr = 0xff; /* clear all event flags */
- printk("<4>Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
+ printk(KERN_WARNING
+ "Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
IDMA_CHAN + 1);
return;
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index d8d299bd1a1..01e48d88f22 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -77,7 +77,7 @@ static struct mtd_partition mpc8xxads_partitions[] = {
}
};
-#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0]))
+#define mpc8xxads_part_num ARRAY_SIZE(mpc8xxads_partitions)
#endif
diff --git a/arch/ppc/xmon/ppc-opc.c b/arch/ppc/xmon/ppc-opc.c
index 533a6c9973d..034313cef6e 100644
--- a/arch/ppc/xmon/ppc-opc.c
+++ b/arch/ppc/xmon/ppc-opc.c
@@ -19,6 +19,7 @@ along with this file; see the file COPYING. If not, write to the Free
Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include <linux/posix_types.h>
+#include <linux/kernel.h>
#include "ansidecl.h"
#include "ppc.h"
@@ -2669,8 +2670,7 @@ const struct powerpc_opcode powerpc_opcodes[] = {
};
-const int powerpc_num_opcodes =
- sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]);
+const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
/* The macro table. This is only used by the assembler. */
@@ -2717,5 +2717,4 @@ const struct powerpc_macro powerpc_macros[] = {
};
-const int powerpc_num_macros =
- sizeof (powerpc_macros) / sizeof (powerpc_macros[0]);
+const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);