Switch SiByte drivers back to __raw_*() functions.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 files changed, 220 insertions, 209 deletions

diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index 1b6df7133c1..7a90ea38384 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -214,12 +214,12 @@ void sb1_dma_init(void)
 	int cpu = smp_processor_id();
 	u64 base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1);
 
-	bus_writeq(base_val,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
-	bus_writeq(base_val | M_DM_DSCR_BASE_RESET,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
-	bus_writeq(base_val | M_DM_DSCR_BASE_ENABL,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_writeq(base_val,
+		     IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_writeq(base_val | M_DM_DSCR_BASE_RESET,
+		     IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_writeq(base_val | M_DM_DSCR_BASE_ENABL,
+		     IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
 }
 
 void clear_page(void *page)
@@ -232,16 +232,16 @@ void clear_page(void *page)
 
 	page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
 	page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
-	bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
 
 	/*
 	 * Don't really want to do it this way, but there's no
 	 * reliable way to delay completion detection.
 	 */
-	while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
-			   M_DM_DSCR_BASE_INTERRUPT))))
+	while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+		 M_DM_DSCR_BASE_INTERRUPT)))
 		;
-	bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
 }
 
 void copy_page(void *to, void *from)
@@ -257,16 +257,16 @@ void copy_page(void *to, void *from)
 
 	page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
 	page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
-	bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
 
 	/*
 	 * Don't really want to do it this way, but there's no
 	 * reliable way to delay completion detection.
 	 */
-	while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
-				    M_DM_DSCR_BASE_INTERRUPT))))
+	while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
+			     M_DM_DSCR_BASE_INTERRUPT)))
 		;
-	bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
 }
 
 #else /* !CONFIG_SIBYTE_DMA_PAGEOPS */
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
index dba3d0872e7..e4dfeb52dce 100644
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
@@ -65,24 +65,25 @@ static void arm_tb(void)
 	u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
 	/* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
 	   trigger start of trace.  XXX vary sampling period */
-	bus_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
-	scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
+	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
 	/* Unfortunately, in Pass 2 we must clear all counters to knock down
 	   a previous interrupt request.  This means that bus profiling
 	   requires ALL of the SCD perf counters. */
-	bus_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is
-		   M_SPC_CFG_ENABLE |		 // enable counting
-		   M_SPC_CFG_CLEAR |		 // clear all counters
-		   V_SPC_CFG_SRC1(1),		 // counter 1 counts cycles
-		   IOADDR(A_SCD_PERF_CNT_CFG));
-	bus_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+	__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+						// keep counters 0,2,3 as is
+		     M_SPC_CFG_ENABLE |		// enable counting
+		     M_SPC_CFG_CLEAR |		// clear all counters
+		     V_SPC_CFG_SRC1(1),		// counter 1 counts cycles
+		     IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
 	/* Reset the trace buffer */
-	bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+	__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
 	/* XXXKW may want to expose control to the data-collector */
 	tb_options |= M_SCD_TRACE_CFG_FORCECNT;
 #endif
-	bus_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
+	__raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
 	sbp.tb_armed = 1;
 }
 
@@ -94,23 +95,30 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs)
 		/* XXX should use XKPHYS to make writes bypass L2 */
 		u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
 		/* Read out trace */
-		bus_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));
+		__raw_writeq(M_SCD_TRACE_CFG_START_READ,
+			     IOADDR(A_SCD_TRACE_CFG));
 		__asm__ __volatile__ ("sync" : : : "memory");
 		/* Loop runs backwards because bundles are read out in reverse order */
 		for (i = 256 * 6; i > 0; i -= 6) {
 			// Subscripts decrease to put bundle in the order
 			//   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
-			p[i-1] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi
-			p[i-2] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo
-			p[i-3] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi
-			p[i-4] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo
-			p[i-5] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi
-			p[i-6] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo
+			p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t2 hi
+			p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t2 lo
+			p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t1 hi
+			p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t1 lo
+			p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t0 hi
+			p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t0 lo
 		}
 		if (!sbp.tb_enable) {
 			DBG(printk(DEVNAME ": tb_intr shutdown\n"));
-			bus_writeq(M_SCD_TRACE_CFG_RESET,
-				   IOADDR(A_SCD_TRACE_CFG));
+			__raw_writeq(M_SCD_TRACE_CFG_RESET,
+				     IOADDR(A_SCD_TRACE_CFG));
 			sbp.tb_armed = 0;
 			wake_up(&sbp.tb_sync);
 		} else {
@@ -119,7 +127,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs)
 	} else {
 		/* No more trace buffer samples */
 		DBG(printk(DEVNAME ": tb_intr full\n"));
-		bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+		__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 		sbp.tb_armed = 0;
 		if (!sbp.tb_enable) {
 			wake_up(&sbp.tb_sync);
@@ -153,13 +161,11 @@ int sbprof_zbprof_start(struct file *filp)
 		return -EBUSY;
 	}
 	/* Make sure there isn't a perf-cnt interrupt waiting */
-	scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
 	/* Disable and clear counters, override SRC_1 */
-	bus_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
-		   M_SPC_CFG_ENABLE |
-		   M_SPC_CFG_CLEAR |
-		   V_SPC_CFG_SRC1(1),
-		   IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
+		     M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
+		     IOADDR(A_SCD_PERF_CNT_CFG));
 
 	/* We grab this interrupt to prevent others from trying to use
            it, even though we don't want to service the interrupts
@@ -173,55 +179,55 @@ int sbprof_zbprof_start(struct file *filp)
 	/* I need the core to mask these, but the interrupt mapper to
 	   pass them through.  I am exploiting my knowledge that
 	   cp0_status masks out IP[5]. krw */
-	bus_writeq(K_INT_MAP_I3,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_PERF_CNT << 3)));
+	__raw_writeq(K_INT_MAP_I3,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_PERF_CNT << 3)));
 
 	/* Initialize address traps */
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
 
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
 
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
 
 	/* Initialize Trace Event 0-7 */
 	//				when interrupt
-	bus_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
+	__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
 
 	/* Initialize Trace Sequence 0-7 */
 	//				     Start on event 0 (interrupt)
-	bus_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
-		   IOADDR(A_SCD_TRACE_SEQUENCE_0));
+	__raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
+		     IOADDR(A_SCD_TRACE_SEQUENCE_0));
 	//			  dsamp when d used | asamp when a used
-	bus_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
-		   K_SCD_TRSEQ_TRIGGER_ALL,
-		   IOADDR(A_SCD_TRACE_SEQUENCE_1));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
+	__raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
+		     K_SCD_TRSEQ_TRIGGER_ALL,
+		     IOADDR(A_SCD_TRACE_SEQUENCE_1));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
 
 	/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
-	bus_writeq((1ULL << K_INT_PERF_CNT),
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
+	__raw_writeq(1ULL << K_INT_PERF_CNT,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
 
 	arm_tb();
 
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
index 1a97e3127ae..482dee054e6 100644
--- a/arch/mips/sibyte/sb1250/bus_watcher.c
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -189,7 +189,7 @@ static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs)
 
 	for (i=0; i<256*6; i++)
 		printk("%016llx\n",
-		       (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ)));
+		       (long long)__raw_readq(IOADDR(A_SCD_TRACE_READ)));
 
 	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 2725b263cce..a62cba9f32b 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -96,11 +96,11 @@ void sb1250_mask_irq(int cpu, int irq)
 	u64 cur_ints;
 
 	spin_lock_irqsave(&sb1250_imr_lock, flags);
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	cur_ints |= (((u64) 1) << irq);
-	__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 
@@ -110,11 +110,11 @@ void sb1250_unmask_irq(int cpu, int irq)
 	u64 cur_ints;
 
 	spin_lock_irqsave(&sb1250_imr_lock, flags);
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	cur_ints &= ~(((u64) 1) << irq);
-	__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 
@@ -149,23 +149,23 @@ static void sb1250_set_affinity(unsigned int irq, unsigned long mask)
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = sb1250_irq_owner[irq];
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
-			       R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
+					R_IMR_INTERRUPT_MASK));
 	int_on = !(cur_ints & (((u64) 1) << irq));
 	if (int_on) {
 		/* If it was on, mask it */
 		cur_ints |= (((u64) 1) << irq);
-		__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
-					      R_IMR_INTERRUPT_MASK));
+		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
+					R_IMR_INTERRUPT_MASK));
 	}
 	sb1250_irq_owner[irq] = cpu;
 	if (int_on) {
 		/* unmask for the new CPU */
-		cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				       R_IMR_INTERRUPT_MASK));
+		cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 		cur_ints &= ~(((u64) 1) << irq);
-		__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-					      R_IMR_INTERRUPT_MASK));
+		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	}
 	spin_unlock(&sb1250_imr_lock);
 	spin_unlock_irqrestore(&desc->lock, flags);
@@ -208,8 +208,8 @@ static void ack_sb1250_irq(unsigned int irq)
 	 * deliver the interrupts to all CPUs (which makes affinity
 	 * changing easier for us)
 	 */
-	pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
-						  R_IMR_LDT_INTERRUPT)));
+	pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
+						    R_IMR_LDT_INTERRUPT)));
 	pending &= ((u64)1 << (irq));
 	if (pending) {
 		int i;
@@ -224,8 +224,8 @@ static void ack_sb1250_irq(unsigned int irq)
 			 * Clear for all CPUs so an affinity switch
 			 * doesn't find an old status
 			 */
-			bus_writeq(pending,
-				   IOADDR(A_IMR_REGISTER(cpu,
+			__raw_writeq(pending,
+				     IOADDR(A_IMR_REGISTER(cpu,
 						R_IMR_LDT_INTERRUPT_CLR)));
 		}
 
@@ -340,12 +340,14 @@ void __init arch_init_irq(void)
 
 	/* Default everything to IP2 */
 	for (i = 0; i < SB1250_NR_IRQS; i++) {	/* was I0 */
-		bus_writeq(IMR_IP2_VAL,
-			   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-				  (i << 3)));
-		bus_writeq(IMR_IP2_VAL,
-			   IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
-				  (i << 3)));
+		__raw_writeq(IMR_IP2_VAL,
+			     IOADDR(A_IMR_REGISTER(0,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (i << 3)));
+		__raw_writeq(IMR_IP2_VAL,
+			     IOADDR(A_IMR_REGISTER(1,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (i << 3)));
 	}
 
 	init_sb1250_irqs();
@@ -355,23 +357,23 @@ void __init arch_init_irq(void)
 	 * inter-cpu messages
 	 */
 	/* Was I1 */
-	bus_writeq(IMR_IP3_VAL,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_MBOX_0 << 3)));
-	bus_writeq(IMR_IP3_VAL,
-		   IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_MBOX_0 << 3)));
+	__raw_writeq(IMR_IP3_VAL,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_MBOX_0 << 3)));
+	__raw_writeq(IMR_IP3_VAL,
+		     IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_MBOX_0 << 3)));
 
 	/* Clear the mailboxes.  The firmware may leave them dirty */
-	bus_writeq(0xffffffffffffffffULL,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
-	bus_writeq(0xffffffffffffffffULL,
-		   IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
+	__raw_writeq(0xffffffffffffffffULL,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
+	__raw_writeq(0xffffffffffffffffULL,
+		     IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
 
 	/* Mask everything except the mailbox registers for both cpus */
 	tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
-	bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
-	bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
+	__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
+	__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
 
 	sb1250_steal_irq(K_INT_MBOX_0);
 
@@ -396,12 +398,14 @@ void __init arch_init_irq(void)
 		sb1250_duart_present[kgdb_port] = 0;
 #endif
 		/* Setup uart 1 settings, mapper */
-		bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
+		__raw_writeq(M_DUART_IMR_BRK,
+			     IOADDR(A_DUART_IMRREG(kgdb_port)));
 
 		sb1250_steal_irq(kgdb_irq);
-		bus_writeq(IMR_IP6_VAL,
-			   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-				  (kgdb_irq<<3)));
+		__raw_writeq(IMR_IP6_VAL,
+			     IOADDR(A_IMR_REGISTER(0,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (kgdb_irq << 3)));
 		sb1250_unmask_irq(0, kgdb_irq);
 	}
 #endif
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index f8c605be96c..df2e266c700 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -153,7 +153,7 @@ void sb1250_setup(void)
 	int bad_config = 0;
 
 	sb1_pass = read_c0_prid() & 0xff;
-	sys_rev = bus_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	soc_pass = G_SYS_REVISION(sys_rev);
 
@@ -162,7 +162,7 @@ void sb1250_setup(void)
 		machine_restart(NULL);
 	}
 
-	plldiv = G_SYS_PLL_DIV(bus_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+	plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
 	zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
 
 	prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index be91b399095..f859db02d3c 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -29,18 +29,18 @@
 #include <asm/sibyte/sb1250_int.h>
 
 static void *mailbox_set_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
 };
 
 static void *mailbox_clear_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
 };
 
 static void *mailbox_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
 };
 
 /*
@@ -73,7 +73,7 @@ void sb1250_smp_finish(void)
  */
 void core_send_ipi(int cpu, unsigned int action)
 {
-	bus_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+	__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
 }
 
 void sb1250_mailbox_interrupt(struct pt_regs *regs)
@@ -83,10 +83,10 @@ void sb1250_mailbox_interrupt(struct pt_regs *regs)
 
 	kstat_this_cpu.irqs[K_INT_MBOX_0]++;
 	/* Load the mailbox register to figure out what we're supposed to do */
-	action = (__bus_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
+	action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
 
 	/* Clear the mailbox to clear the interrupt */
-	__bus_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
+	____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
 
 	/*
 	 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index 8b4c848c907..0ffbc835b11 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -67,24 +67,24 @@ void sb1250_time_init(void)
 	sb1250_mask_irq(cpu, irq);
 
 	/* Map the timer interrupt to ip[4] of this cpu */
-	bus_writeq(IMR_IP4_VAL,
-		   IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
-			  (irq << 3)));
+	__raw_writeq(IMR_IP4_VAL,
+		     IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+			    (irq << 3)));
 
 	/* the general purpose timer ticks at 1 Mhz independent if the rest of the system */
 	/* Disable the timer and set up the count */
-	bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 #ifdef CONFIG_SIMULATION
-	bus_writeq(50000 / HZ,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+	__raw_writeq(50000 / HZ,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #else
-	bus_writeq(1000000/HZ,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+	__raw_writeq(1000000 / HZ,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #endif
 
 	/* Set the timer running */
-	bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
 	sb1250_unmask_irq(cpu, irq);
 	sb1250_steal_irq(irq);
@@ -105,8 +105,8 @@ void sb1250_timer_interrupt(struct pt_regs *regs)
 	int irq = K_INT_TIMER_0 + cpu;
 
 	/* Reset the timer */
-	__bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
 	/*
 	 * CPU 0 handles the global timer interrupt job
@@ -130,7 +130,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs)
 unsigned long sb1250_gettimeoffset(void)
 {
 	unsigned long count =
-		bus_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+		__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
 
 	return 1000000/HZ - count;
  }
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index a686bb716ec..5b4fc26c1b3 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -82,59 +82,60 @@
 #define M41T81REG_SQW	0x13		/* square wave register */
 
 #define M41T81_CCR_ADDRESS	0x68
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+#define SMB_CSR(reg)	IOADDR(A_SMB_REGISTER(1, reg))
 
 static int m41t81_read(uint8_t addr)
 {
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
-	bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
 		/* Clear error bit by writing a 1 */
-		bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
 		return -1;
 	}
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int m41t81_write(uint8_t addr, int b)
 {
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD));
-	bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
 		/* Clear error bit by writing a 1 */
-		bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
 		return -1;
 	}
 
 	/* read the same byte again to make sure it is written */
-	bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
 	return 0;
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index 981d21f16e6..d9ff9323f24 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -57,52 +57,52 @@
 
 #define X1241_CCR_ADDRESS	0x6F
 
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+#define SMB_CSR(reg)	IOADDR(A_SMB_REGISTER(1, reg))
 
 static int xicor_read(uint8_t addr)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         }
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int xicor_write(uint8_t addr, int b)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq(addr, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+	__raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         } else {
 		return 0;
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
index c1f1a9defee..97c73c793c3 100644
--- a/arch/mips/sibyte/swarm/time.c
+++ b/arch/mips/sibyte/swarm/time.c
@@ -79,48 +79,48 @@ static unsigned int usec_bias = 0;
 
 static int xicor_read(uint8_t addr)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         }
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int xicor_write(uint8_t addr, int b)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq(addr, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+	__raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         } else {
 		return 0;
@@ -228,8 +228,8 @@ void __init swarm_time_init(void)
 	/* Establish communication with the Xicor 1241 RTC */
 	/* XXXKW how do I share the SMBus with the I2C subsystem? */
 
-	bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
-	bus_writeq(0, SMB_CSR(R_SMB_CONTROL));
+	__raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
+	__raw_writeq(0, SMB_CSR(R_SMB_CONTROL));
 
 	if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
 		printk("x1241: couldn't detect on SWARM SMBus 1\n");