[MIPS] Support for several more SNI RM models.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

14 files changed, 1719 insertions, 382 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a92ce6bd7cf..46fa5ca9f5a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -726,15 +726,16 @@ config SNI_RM
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
-	select HAVE_STD_PC_SERIAL_PORT
 	select HW_HAS_EISA
 	select HW_HAS_PCI
+	select IRQ_CPU
 	select I8253
 	select I8259
 	select ISA
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
+	select SYS_HAS_CPU_R10000
 	select R5000_CPU_SCACHE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
@@ -1066,7 +1067,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MACH_DECSTATION
+	default "4" if MACH_DECSTATION || SNI_RM
 	default "7" if SGI_IP27
 	default "5"
 
diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
index a176f2ca865..0c9a4732d45 100644
--- a/arch/mips/pci/fixup-sni.c
+++ b/arch/mips/pci/fixup-sni.c
@@ -15,7 +15,7 @@
 #include <asm/sni.h>
 
 /*
- * Shortcuts ...
+ * PCIMT Shortcuts ...
  */
 #define SCSI	PCIMT_IRQ_SCSI
 #define ETH	PCIMT_IRQ_ETHERNET
@@ -67,6 +67,50 @@ static char irq_tab_rm300d[8][5] __initdata = {
 	{     0, INTD, INTA, INTB, INTC },	/* Slot 4 */
 };
 
+static char irq_tab_rm300e[5][5] __initdata = {
+	/*       INTA  INTB  INTC  INTD */
+	{     0,    0,    0,    0,    0 },	/* HOST bridge */
+	{  SCSI, SCSI, SCSI, SCSI, SCSI },	/* SCSI */
+	{     0, INTC, INTD, INTA, INTB },	/* Bridge/i960 */
+	{     0, INTD, INTA, INTB, INTC },	/* Slot 1 */
+	{     0, INTA, INTB, INTC, INTD },	/* Slot 2 */
+};
+#undef SCSI
+#undef ETH
+#undef INTA
+#undef INTB
+#undef INTC
+#undef INTD
+
+
+/*
+ * PCIT Shortcuts ...
+ */
+#define SCSI0	PCIT_IRQ_SCSI0
+#define SCSI1	PCIT_IRQ_SCSI1
+#define ETH	PCIT_IRQ_ETHERNET
+#define INTA	PCIT_IRQ_INTA
+#define INTB	PCIT_IRQ_INTB
+#define INTC	PCIT_IRQ_INTC
+#define INTD	PCIT_IRQ_INTD
+
+static char irq_tab_pcit[13][5] __initdata = {
+	/*       INTA  INTB  INTC  INTD */
+	{     0,     0,     0,     0,     0 },	/* HOST bridge */
+	{ SCSI0, SCSI0, SCSI0, SCSI0, SCSI0 },	/* SCSI */
+	{ SCSI1, SCSI1, SCSI1, SCSI1, SCSI1 },	/* SCSI */
+	{   ETH,   ETH,   ETH,   ETH,   ETH },	/* Ethernet */
+	{     0,  INTA,  INTB,  INTC,  INTD },	/* PCI-PCI bridge */
+	{     0,     0,     0,     0,     0 },	/* Unused */
+	{     0,     0,     0,     0,     0 },	/* Unused */
+	{     0,     0,     0,     0,     0 },	/* Unused */
+	{     0,  INTA,  INTB,  INTC,  INTD },	/* Slot 1 */
+	{     0,  INTB,  INTC,  INTD,  INTA },	/* Slot 2 */
+	{     0,  INTC,  INTD,  INTA,  INTB },	/* Slot 3 */
+	{     0,  INTD,  INTA,  INTB,  INTC },	/* Slot 4 */
+	{     0,  INTA,  INTB,  INTC,  INTD },	/* Slot 5 */
+};
+
 static inline int is_rm300_revd(void)
 {
 	unsigned char csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
@@ -76,10 +120,24 @@ static inline int is_rm300_revd(void)
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	if (is_rm300_revd())
-		return irq_tab_rm300d[slot][pin];
+	switch (sni_brd_type) {
+	case SNI_BRD_PCI_TOWER:
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        return irq_tab_pcit[slot][pin];
+
+	case SNI_BRD_PCI_MTOWER:
+	        if (is_rm300_revd())
+		        return irq_tab_rm300d[slot][pin];
+	        /* fall through */
 
-	return irq_tab_rm200[slot][pin];
+	case SNI_BRD_PCI_DESKTOP:
+	        return irq_tab_rm200[slot][pin];
+
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        return irq_tab_rm300e[slot][pin];
+	}
+
+	return 0;
 }
 
 /* Do platform specific device initialization at pci_enable_device() time */
diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c
index 2b0ccd6d9dc..fa2d2c60f79 100644
--- a/arch/mips/pci/ops-sni.c
+++ b/arch/mips/pci/ops-sni.c
@@ -83,7 +83,82 @@ static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg,
 	return 0;
 }
 
-struct pci_ops sni_pci_ops = {
+struct pci_ops sni_pcimt_ops = {
 	.read = pcimt_read,
 	.write = pcimt_write,
 };
+
+static int pcit_set_config_address(unsigned int busno, unsigned int devfn, int reg)
+{
+	if ((devfn > 255) || (reg > 255) || (busno > 255))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	outl ((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcit_read(struct pci_bus *bus, unsigned int devfn, int reg,
+		      int size, u32 * val)
+{
+	int res;
+
+	/*
+	 * on bus 0 we need to check, whether there is a device answering
+	 * for the devfn by doing a config write and checking the result. If
+	 * we don't do it, we will get a data bus error
+	 */
+	if (bus->number == 0) {
+		pcit_set_config_address (0, 0, 0x68);
+		outl (inl (0xcfc) | 0xc0000000, 0xcfc);
+		if ((res = pcit_set_config_address(0, devfn, 0)))
+			return res;
+		outl (0xffffffff, 0xcfc);
+		pcit_set_config_address (0, 0, 0x68);
+		if (inl(0xcfc) & 0x100000)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+	if ((res = pcit_set_config_address(bus->number, devfn, reg)))
+		return res;
+
+	switch (size) {
+	case 1:
+		*val = inb(PCIMT_CONFIG_DATA + (reg & 3));
+		break;
+	case 2:
+		*val = inw(PCIMT_CONFIG_DATA + (reg & 2));
+		break;
+	case 4:
+		*val = inl(PCIMT_CONFIG_DATA);
+		break;
+	}
+	return 0;
+}
+
+static int pcit_write(struct pci_bus *bus, unsigned int devfn, int reg,
+		       int size, u32 val)
+{
+	int res;
+
+	if ((res = pcit_set_config_address(bus->number, devfn, reg)))
+		return res;
+
+	switch (size) {
+	case 1:
+		outb (val, PCIMT_CONFIG_DATA + (reg & 3));
+		break;
+	case 2:
+		outw (val, PCIMT_CONFIG_DATA + (reg & 2));
+		break;
+	case 4:
+		outl (val, PCIMT_CONFIG_DATA);
+		break;
+	}
+
+	return 0;
+}
+
+
+struct pci_ops sni_pcit_ops = {
+	.read = pcit_read,
+	.write = pcit_write,
+};
diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile
index a5eb0adb87c..e30809a9215 100644
--- a/arch/mips/sni/Makefile
+++ b/arch/mips/sni/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the SNI specific part of the kernel
 #
 
-obj-y	 	+= irq.o pcimt_scache.o reset.o setup.o
+obj-y += irq.o reset.o setup.o ds1216.o a20r.o rm200.o pcimt.o pcit.o time.o
 obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
new file mode 100644
index 00000000000..31ab80f1bef
--- /dev/null
+++ b/arch/mips/sni/a20r.c
@@ -0,0 +1,227 @@
+/*
+ * A20R specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/ds1216.h>
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port a20r_data[] = {
+	PORT(0x3f8, 4),
+	PORT(0x2f8, 3),
+	{ },
+};
+
+static struct platform_device a20r_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= a20r_data,
+	},
+};
+
+static struct resource snirm_82596_rsrc[] = {
+	{
+		.start = 0xb8000000,
+		.end   = 0xb8000004,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 0xb8010000,
+		.end   = 0xb8010004,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 0xbff00000,
+		.end   = 0xbff00020,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 22,
+		.end   = 22,
+		.flags = IORESOURCE_IRQ
+	},
+	{
+		.flags = 0x01                /* 16bit mpu port access */
+	}
+};
+
+static struct platform_device snirm_82596_pdev = {
+	.name           = "snirm_82596",
+	.num_resources  = ARRAY_SIZE(snirm_82596_rsrc),
+	.resource       = snirm_82596_rsrc
+};
+
+static struct resource snirm_53c710_rsrc[] = {
+	{
+		.start = 0xb9000000,
+		.end   = 0xb90fffff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 19,
+		.end   = 19,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device snirm_53c710_pdev = {
+	.name           = "snirm_53c710",
+	.num_resources  = ARRAY_SIZE(snirm_53c710_rsrc),
+	.resource       = snirm_53c710_rsrc
+};
+
+static struct resource sc26xx_rsrc[] = {
+	{
+		.start = 0xbc070000,
+		.end   = 0xbc0700ff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 20,
+		.end   = 20,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device sc26xx_pdev = {
+	.name           = "SC26xx",
+	.num_resources  = ARRAY_SIZE(sc26xx_rsrc),
+	.resource       = sc26xx_rsrc
+};
+
+static u32 a20r_ack_hwint(void)
+{
+	u32 status = read_c0_status();
+
+	write_c0_status (status | 0x00010000);
+	asm volatile(
+	"	.set	push			\n"
+	"	.set	noat			\n"
+	"	.set	noreorder		\n"
+	"	lw	$1, 0(%0)		\n"
+	"	sb	$0, 0(%1)		\n"
+	"	sync				\n"
+	"	lb	%1, 0(%1)		\n"
+	"	b	1f			\n"
+	"	ori	%1, $1, 2		\n"
+	"	.align	8			\n"
+	"1:					\n"
+	"	nop				\n"
+	"	sw	%1, 0(%0)		\n"
+	"	sync				\n"
+	"	li	%1, 0x20		\n"
+	"2:					\n"
+	"	nop				\n"
+	"	bnez	%1,2b			\n"
+	"	addiu	%1, -1			\n"
+	"	sw	$1, 0(%0)		\n"
+	"	sync				\n"
+		".set   pop			\n"
+	:
+	: "Jr" (PCIMT_UCONF), "Jr" (0xbc000000));
+	write_c0_status(status);
+
+	return status;
+}
+
+static inline void unmask_a20r_irq(unsigned int irq)
+{
+	set_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
+	irq_enable_hazard();
+}
+
+static inline void mask_a20r_irq(unsigned int irq)
+{
+	clear_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
+	irq_disable_hazard();
+}
+
+static void end_a20r_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		a20r_ack_hwint();
+		unmask_a20r_irq(irq);
+	}
+}
+
+static struct irq_chip a20r_irq_type = {
+	.typename	= "A20R",
+	.ack		= mask_a20r_irq,
+	.mask		= mask_a20r_irq,
+	.mask_ack	= mask_a20r_irq,
+	.unmask		= unmask_a20r_irq,
+	.end		= end_a20r_irq,
+};
+
+/*
+ * hwint 0 receive all interrupts
+ */
+static void a20r_hwint(void)
+{
+	u32 cause, status;
+	int irq;
+
+	clear_c0_status (IE_IRQ0);
+	status = a20r_ack_hwint();
+	cause = read_c0_cause();
+
+	irq = ffs(((cause & status) >> 8) & 0xf8);
+	if (likely(irq > 0))
+		do_IRQ(SNI_A20R_IRQ_BASE + irq - 1);
+	set_c0_status(IE_IRQ0);
+}
+
+void __init sni_a20r_irq_init(void)
+{
+	int i;
+
+	for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
+		set_irq_chip(i, &a20r_irq_type);
+	sni_hwint = a20r_hwint;
+	change_c0_status(ST0_IM, IE_IRQ0);
+	setup_irq (SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
+}
+
+void sni_a20r_init(void)
+{
+	ds1216_base = (volatile unsigned char *) SNI_DS1216_A20R_BASE;
+	rtc_mips_get_time = ds1216_get_cmos_time;
+}
+
+static int __init snirm_a20r_setup_devinit(void)
+{
+	switch (sni_brd_type) {
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        platform_device_register(&snirm_82596_pdev);
+	        platform_device_register(&snirm_53c710_pdev);
+	        platform_device_register(&sc26xx_pdev);
+	        platform_device_register(&a20r_serial8250_device);
+	        break;
+	}
+
+	return 0;
+}
+
+device_initcall(snirm_a20r_setup_devinit);
diff --git a/arch/mips/sni/ds1216.c b/arch/mips/sni/ds1216.c
new file mode 100644
index 00000000000..1d92732c14f
--- /dev/null
+++ b/arch/mips/sni/ds1216.c
@@ -0,0 +1,81 @@
+
+#include <linux/bcd.h>
+#include <linux/time.h>
+
+#include <asm/ds1216.h>
+
+volatile unsigned char *ds1216_base;
+
+/*
+ * Read the 64 bit we'd like to have - It a series
+ * of 64 bits showing up in the LSB of the base register.
+ *
+ */
+static unsigned char *ds1216_read(void)
+{
+	static unsigned char	rdbuf[8];
+	unsigned char		c;
+	int			i, j;
+
+	for (i = 0; i < 8; i++) {
+		c = 0x0;
+		for (j = 0; j < 8; j++) {
+			c |= (*ds1216_base & 0x1) << j;
+		}
+		rdbuf[i] = c;
+	}
+
+	return rdbuf;
+}
+
+static void ds1216_switch_ds_to_clock(void)
+{
+	unsigned char magic[] = {
+		0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c
+	};
+	int i,j,c;
+
+	/* Reset magic pointer */
+	c = *ds1216_base;
+
+	/* Write 64 bit magic to DS1216 */
+	for (i = 0; i < 8; i++) {
+		c = magic[i];
+		for (j = 0; j < 8; j++) {
+			*ds1216_base = c;
+			c = c >> 1;
+		}
+	}
+}
+
+unsigned long ds1216_get_cmos_time(void)
+{
+	unsigned char	*rdbuf;
+	unsigned int	year, month, date, hour, min, sec;
+
+	ds1216_switch_ds_to_clock();
+	rdbuf = ds1216_read();
+
+	sec = BCD2BIN(DS1216_SEC(rdbuf));
+	min = BCD2BIN(DS1216_MIN(rdbuf));
+	hour = BCD2BIN(DS1216_HOUR(rdbuf));
+	date = BCD2BIN(DS1216_DATE(rdbuf));
+	month = BCD2BIN(DS1216_MONTH(rdbuf));
+	year = BCD2BIN(DS1216_YEAR(rdbuf));
+
+	if (DS1216_1224(rdbuf) && DS1216_AMPM(rdbuf))
+		hour+=12;
+
+	if (year < 70)
+		year += 2000;
+	else
+		year += 1900;
+
+	return mktime(year, month, date, hour, min, sec);
+}
+
+int ds1216_set_rtc_mmss(unsigned long nowtime)
+{
+	printk("ds1216_set_rtc_mmss called but not implemented\n");
+	return -1;
+}
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 039e8e54050..ad5fc471a00 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 1992 Linus Torvalds
  * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 2006 Thomas Bogendoerfer
  */
 #include <linux/delay.h>
 #include <linux/init.h>
@@ -15,152 +16,34 @@
 #include <asm/i8259.h>
 #include <asm/io.h>
 #include <asm/sni.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
 
-static void enable_pciasic_irq(unsigned int irq)
-{
-	unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
-
-	*(volatile u8 *) PCIMT_IRQSEL |= mask;
-}
-
-void disable_pciasic_irq(unsigned int irq)
-{
-	unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2));
-
-	*(volatile u8 *) PCIMT_IRQSEL &= mask;
-}
+void (*sni_hwint)(void);
 
-static void end_pciasic_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_pciasic_irq(irq);
-}
-
-static struct irq_chip pciasic_irq_type = {
-	.name = "ASIC-PCI",
-	.ack = disable_pciasic_irq,
-	.mask = disable_pciasic_irq,
-	.mask_ack = disable_pciasic_irq,
-	.unmask = enable_pciasic_irq,
-	.end = end_pciasic_irq,
-};
-
-/*
- * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
- * button interrupts.  Later ...
- */
-static void pciasic_hwint0(void)
-{
-	panic("Received int0 but no handler yet ...");
-}
-
-/* This interrupt was used for the com1 console on the first prototypes.  */
-static void pciasic_hwint2(void)
-{
-	/* I think this shouldn't happen on production machines.  */
-	panic("hwint2 and no handler yet");
-}
-
-/* hwint5 is the r4k count / compare interrupt  */
-static void pciasic_hwint5(void)
-{
-	panic("hwint5 and no handler yet");
-}
-
-static unsigned int ls1bit8(unsigned int x)
-{
-	int b = 7, s;
-
-	s = 4; if ((x & 0x0f) == 0) s = 0; b -= s; x <<= s;
-	s = 2; if ((x & 0x30) == 0) s = 0; b -= s; x <<= s;
-	s = 1; if ((x & 0x40) == 0) s = 0; b -= s;
-
-	return b;
-}
-
-/*
- * hwint 1 deals with EISA and SCSI interrupts,
- *
- * The EISA_INT bit in CSITPEND is high active, all others are low active.
- */
-static void pciasic_hwint1(void)
+asmlinkage void plat_irq_dispatch(void)
 {
-	u8 pend = *(volatile char *)PCIMT_CSITPEND;
-	unsigned long flags;
-
-	if (pend & IT_EISA) {
-		int irq;
-		/*
-		 * Note: ASIC PCI's builtin interrupt achknowledge feature is
-		 * broken.  Using it may result in loss of some or all i8259
-		 * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
-		 */
-		irq = i8259_irq();
-		if (unlikely(irq < 0))
-			return;
-
-		do_IRQ(irq);
-	}
-
-	if (!(pend & IT_SCSI)) {
-		flags = read_c0_status();
-		clear_c0_status(ST0_IM);
-		do_IRQ(PCIMT_IRQ_SCSI);
-		write_c0_status(flags);
-	}
+	sni_hwint();
 }
 
-/*
- * hwint 3 should deal with the PCI A - D interrupts,
- */
-static void pciasic_hwint3(void)
+/* ISA irq handler */
+static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
 {
-	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	int irq;
 
-	pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
-	clear_c0_status(IE_IRQ3);
-	irq = PCIMT_IRQ_INT2 + ls1bit8(pend);
-	do_IRQ(irq);
-	set_c0_status(IE_IRQ3);
-}
+	irq = i8259_irq();
+	if (unlikely(irq < 0))
+		return IRQ_NONE;
 
-/*
- * hwint 4 is used for only the onboard PCnet 32.
- */
-static void pciasic_hwint4(void)
-{
-	clear_c0_status(IE_IRQ4);
-	do_IRQ(PCIMT_IRQ_ETHERNET);
-	set_c0_status(IE_IRQ4);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause();
-	static unsigned char led_cache;
-
-	*(volatile unsigned char *) PCIMT_CSLED = ++led_cache;
-
-	if (pending & 0x0800)
-		pciasic_hwint1();
-	else if (pending & 0x4000)
-		pciasic_hwint4();
-	else if (pending & 0x2000)
-		pciasic_hwint3();
-	else if (pending & 0x1000)
-		pciasic_hwint2();
-	else if (pending & 0x8000)
-		pciasic_hwint5();
-	else if (pending & 0x0400)
-		pciasic_hwint0();
+	do_IRQ(irq);
+	return IRQ_HANDLED;
 }
 
-void __init init_pciasic(void)
-{
-	* (volatile u8 *) PCIMT_IRQSEL =
-		IT_EISA | IT_INTA | IT_INTB | IT_INTC | IT_INTD;
-}
+struct irqaction sni_isa_irq = {
+	.handler = sni_isa_irq_handler,
+	.name = "ISA",
+	.flags = SA_SHIRQ
+};
 
 /*
  * On systems with i8259-style interrupt controllers we assume for
@@ -169,14 +52,31 @@ void __init init_pciasic(void)
  */
 void __init arch_init_irq(void)
 {
-	int i;
-
 	init_i8259_irqs();			/* Integrated i8259  */
-	init_pciasic();
-
-	/* Actually we've got more interrupts to handle ...  */
-	for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_ETHERNET; i++)
-		set_irq_chip(i, &pciasic_irq_type);
-
-	change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ2|IE_IRQ3|IE_IRQ4);
+	switch (sni_brd_type) {
+	case SNI_BRD_10:
+	case SNI_BRD_10NEW:
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        sni_a20r_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER:
+	        sni_pcit_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        sni_pcit_cplus_irq_init();
+	        break;
+
+	case SNI_BRD_RM200:
+	        sni_rm200_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        sni_pcimt_irq_init();
+	        break;
+	}
 }
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
new file mode 100644
index 00000000000..6c0dad7cbf4
--- /dev/null
+++ b/arch/mips/sni/pcimt.c
@@ -0,0 +1,390 @@
+/*
+ * PCIMT specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mc146818-time.h>
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
+
+#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF)
+#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE)
+
+static void __init sni_pcimt_sc_init(void)
+{
+	unsigned int scsiz, sc_size;
+
+	scsiz = cacheconf & 7;
+	if (scsiz == 0) {
+		printk("Second level cache is deactived.\n");
+		return;
+	}
+	if (scsiz >= 6) {
+		printk("Invalid second level cache size configured, "
+		       "deactivating second level cache.\n");
+		cacheconf = 0;
+		return;
+	}
+
+	sc_size = 128 << scsiz;
+	printk("%dkb second level cache detected, deactivating.\n", sc_size);
+	cacheconf = 0;
+}
+
+
+/*
+ * A bit more gossip about the iron we're running on ...
+ */
+static inline void sni_pcimt_detect(void)
+{
+	char boardtype[80];
+	unsigned char csmsr;
+	char *p = boardtype;
+	unsigned int asic;
+
+	csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
+
+	p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
+	if ((csmsr & 0x80) == 0)
+		p += sprintf(p, ", board revision %s",
+		             (csmsr & 0x20) ? "D" : "C");
+	asic = csmsr & 0x80;
+	asic = (csmsr & 0x08) ? asic : !asic;
+	p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
+	printk("%s.\n", boardtype);
+}
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port pcimt_data[] = {
+	PORT(0x3f8, 4),
+	PORT(0x2f8, 3),
+	{ },
+};
+
+static struct platform_device pcimt_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= pcimt_data,
+	},
+};
+
+static struct resource sni_io_resource = {
+	.start	= 0x00001000UL,
+	.end	= 0x03bfffffUL,
+	.name	= "PCIMT IO MEM",
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pcimt_io_resources[] = {
+	{
+		.start	= 0x00,
+		.end	= 0x1f,
+		.name	= "dma1",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x40,
+		.end	= 0x5f,
+		.name	= "timer",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x60,
+		.end	= 0x6f,
+		.name	= "keyboard",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x80,
+		.end	= 0x8f,
+		.name	= "dma page reg",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xc0,
+		.end	= 0xdf,
+		.name	= "dma2",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xcfc,
+		.end	= 0xcff,
+		.name	= "PCI config data",
+		.flags	= IORESOURCE_BUSY
+	}
+};
+
+static struct resource sni_mem_resource = {
+	.start	= 0x10000000UL,
+	.end	= 0xffffffffUL,
+	.name	= "PCIMT PCI MEM",
+	.flags	= IORESOURCE_MEM
+};
+
+/*
+ * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
+ * for other purposes.  Be paranoid and allocate all of the before the PCI
+ * code gets a chance to to map anything else there ...
+ *
+ * This leaves the following areas available:
+ *
+ * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
+ * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
+ * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
+ * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
+ * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
+ */
+static struct resource pcimt_mem_resources[] = {
+	{
+		.start	= 0x100a0000,
+		.end	= 0x100bffff,
+		.name	= "Video RAM area",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x100c0000,
+		.end	= 0x100fffff,
+		.name	= "ISA Reserved",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x14000000,
+		.end	= 0x17bfffff,
+		.name	= "PCI IO",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x17c00000,
+		.end	= 0x17ffffff,
+		.name	= "Cache Replacement Area",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1a000000,
+		.end	= 0x1a000003,
+		.name	= "PCI INT Acknowledge",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fc00000,
+		.end	= 0x1fc7ffff,
+		.name	= "Boot PROM",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fc80000,
+		.end	= 0x1fcfffff,
+		.name	= "Diag PROM",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fd00000,
+		.end	= 0x1fdfffff,
+		.name	= "X-Bus",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fe00000,
+		.end	= 0x1fefffff,
+		.name	= "BIOS map",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1ff00000,
+		.end	= 0x1ff7ffff,
+		.name	= "NVRAM / EEPROM",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fff0000,
+		.end	= 0x1fffefff,
+		.name	= "ASIC PCI",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1ffff000,
+		.end	= 0x1fffffff,
+		.name	= "MP Agent",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x20000000,
+		.end	= 0x9fffffff,
+		.name	= "Main Memory",
+		.flags	= IORESOURCE_BUSY
+	}
+};
+
+static void __init sni_pcimt_resource_init(void)
+{
+	int i;
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
+		request_resource(&ioport_resource, pcimt_io_resources + i);
+
+	/* request mem space for pcimt-specific devices */
+	for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
+		request_resource(&sni_mem_resource, pcimt_mem_resources + i);
+
+	ioport_resource.end = sni_io_resource.end;
+}
+
+extern struct pci_ops sni_pcimt_ops;
+
+static struct pci_controller sni_controller = {
+	.pci_ops	= &sni_pcimt_ops,
+	.mem_resource	= &sni_mem_resource,
+	.mem_offset	= 0x10000000UL,
+	.io_resource	= &sni_io_resource,
+	.io_offset	= 0x00000000UL
+};
+
+static void enable_pcimt_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
+
+	*(volatile u8 *) PCIMT_IRQSEL |= mask;
+}
+
+void disable_pcimt_irq(unsigned int irq)
+{
+	unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2));
+
+	*(volatile u8 *) PCIMT_IRQSEL &= mask;
+}
+
+static void end_pcimt_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_pcimt_irq(irq);
+}
+
+static struct irq_chip pcimt_irq_type = {
+	.typename = "PCIMT",
+	.ack = disable_pcimt_irq,
+	.mask = disable_pcimt_irq,
+	.mask_ack = disable_pcimt_irq,
+	.unmask = enable_pcimt_irq,
+	.end = end_pcimt_irq,
+};
+
+/*
+ * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
+ * button interrupts.  Later ...
+ */
+static void pcimt_hwint0(void)
+{
+	panic("Received int0 but no handler yet ...");
+}
+
+/*
+ * hwint 1 deals with EISA and SCSI interrupts,
+ *
+ * The EISA_INT bit in CSITPEND is high active, all others are low active.
+ */
+static void pcimt_hwint1(void)
+{
+	u8 pend = *(volatile char *)PCIMT_CSITPEND;
+	unsigned long flags;
+
+	if (pend & IT_EISA) {
+		int irq;
+		/*
+		 * Note: ASIC PCI's builtin interrupt achknowledge feature is
+		 * broken.  Using it may result in loss of some or all i8259
+		 * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
+		 */
+		irq = i8259_irq();
+		if (unlikely(irq < 0))
+			return;
+
+		do_IRQ(irq);
+	}
+
+	if (!(pend & IT_SCSI)) {
+		flags = read_c0_status();
+		clear_c0_status(ST0_IM);
+		do_IRQ(PCIMT_IRQ_SCSI);
+		write_c0_status(flags);
+	}
+}
+
+/*
+ * hwint 3 should deal with the PCI A - D interrupts,
+ */
+static void pcimt_hwint3(void)
+{
+	u8 pend = *(volatile char *)PCIMT_CSITPEND;
+	int irq;
+
+	pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
+	pend ^= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
+	clear_c0_status(IE_IRQ3);
+	irq = PCIMT_IRQ_INT2 + ffs(pend) - 1;
+	do_IRQ(irq);
+	set_c0_status(IE_IRQ3);
+}
+
+static void sni_pcimt_hwint(void)
+{
+	u32 pending = (read_c0_cause() & read_c0_status());
+
+	if (pending & C_IRQ5)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7);
+	else if (pending & C_IRQ4)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 6);
+	else if (pending & C_IRQ3)
+		pcimt_hwint3();
+	else if (pending & C_IRQ1)
+		pcimt_hwint1();
+	else if (pending & C_IRQ0) {
+		pcimt_hwint0();
+	}
+}
+
+void __init sni_pcimt_irq_init(void)
+{
+	int i;
+
+	*(volatile u8 *) PCIMT_IRQSEL = IT_ETH | IT_EISA;
+	mips_cpu_irq_init();
+	/* Actually we've got more interrupts to handle ...  */
+	for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
+		set_irq_chip(i, &pcimt_irq_type);
+	sni_hwint = sni_pcimt_hwint;
+	change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
+}
+
+void sni_pcimt_init(void)
+{
+	sni_pcimt_resource_init();
+	sni_pcimt_detect();
+	sni_pcimt_sc_init();
+	rtc_mips_get_time = mc146818_get_cmos_time;
+	rtc_mips_set_time = mc146818_set_rtc_mmss;
+	board_time_init = sni_cpu_time_init;
+#ifdef CONFIG_PCI
+	register_pci_controller(&sni_controller);
+#endif
+}
+
+static int __init snirm_pcimt_setup_devinit(void)
+{
+	switch (sni_brd_type) {
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        platform_device_register(&pcimt_serial8250_device);
+	        break;
+	}
+
+	return 0;
+}
+
+device_initcall(snirm_pcimt_setup_devinit);
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
new file mode 100644
index 00000000000..3921096023c
--- /dev/null
+++ b/arch/mips/sni/pcit.c
@@ -0,0 +1,351 @@
+/*
+ * PCI Tower specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mc146818-time.h>
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/irq_cpu.h>
+
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port pcit_data[] = {
+	PORT(0x3f8, 0),
+	PORT(0x2f8, 3),
+	{ },
+};
+
+static struct platform_device pcit_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= pcit_data,
+	},
+};
+
+static struct plat_serial8250_port pcit_cplus_data[] = {
+	PORT(0x3f8, 4),
+	PORT(0x2f8, 3),
+	PORT(0x3e8, 4),
+	PORT(0x2e8, 3),
+	{ },
+};
+
+static struct platform_device pcit_cplus_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= pcit_cplus_data,
+	},
+};
+
+static struct resource sni_io_resource = {
+	.start	= 0x00001000UL,
+	.end	= 0x03bfffffUL,
+	.name	= "PCIT IO MEM",
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pcit_io_resources[] = {
+	{
+		.start	= 0x00,
+		.end	= 0x1f,
+		.name	= "dma1",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x40,
+		.end	= 0x5f,
+		.name	= "timer",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x60,
+		.end	= 0x6f,
+		.name	= "keyboard",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x80,
+		.end	= 0x8f,
+		.name	= "dma page reg",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xc0,
+		.end	= 0xdf,
+		.name	= "dma2",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xcfc,
+		.end	= 0xcff,
+		.name	= "PCI config data",
+		.flags	= IORESOURCE_BUSY
+	}
+};
+
+static struct resource sni_mem_resource = {
+	.start	= 0x10000000UL,
+	.end	= 0xffffffffUL,
+	.name	= "PCIT PCI MEM",
+	.flags	= IORESOURCE_MEM
+};
+
+/*
+ * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
+ * for other purposes.  Be paranoid and allocate all of the before the PCI
+ * code gets a chance to to map anything else there ...
+ *
+ * This leaves the following areas available:
+ *
+ * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
+ * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
+ * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
+ * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
+ * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
+ */
+static struct resource pcit_mem_resources[] = {
+	{
+		.start	= 0x14000000,
+		.end	= 0x17bfffff,
+		.name	= "PCI IO",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x17c00000,
+		.end	= 0x17ffffff,
+		.name	= "Cache Replacement Area",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x180a0000,
+		.end	= 0x180bffff,
+		.name	= "Video RAM area",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x180c0000,
+		.end	= 0x180fffff,
+		.name	= "ISA Reserved",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x19000000,
+		.end	= 0x1fbfffff,
+		.name	= "PCI MEM",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fc00000,
+		.end	= 0x1fc7ffff,
+		.name	= "Boot PROM",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fc80000,
+		.end	= 0x1fcfffff,
+		.name	= "Diag PROM",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fd00000,
+		.end	= 0x1fdfffff,
+		.name	= "X-Bus",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fe00000,
+		.end	= 0x1fefffff,
+		.name	= "BIOS map",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1ff00000,
+		.end	= 0x1ff7ffff,
+		.name	= "NVRAM / EEPROM",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1fff0000,
+		.end	= 0x1fffefff,
+		.name	= "MAUI ASIC",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x1ffff000,
+		.end	= 0x1fffffff,
+		.name	= "MP Agent",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x20000000,
+		.end	= 0x9fffffff,
+		.name	= "Main Memory",
+		.flags	= IORESOURCE_BUSY
+	}
+};
+
+static void __init sni_pcit_resource_init(void)
+{
+	int i;
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < ARRAY_SIZE(pcit_io_resources); i++)
+		request_resource(&ioport_resource, pcit_io_resources + i);
+
+	/* request mem space for pcimt-specific devices */
+	for (i = 0; i < ARRAY_SIZE(pcit_mem_resources); i++)
+		request_resource(&sni_mem_resource, pcit_mem_resources + i);
+
+	ioport_resource.end = sni_io_resource.end;
+}
+
+
+extern struct pci_ops sni_pcit_ops;
+
+static struct pci_controller sni_pcit_controller = {
+	.pci_ops	= &sni_pcit_ops,
+	.mem_resource	= &sni_mem_resource,
+	.mem_offset	= 0x10000000UL,
+	.io_resource	= &sni_io_resource,
+	.io_offset	= 0x00000000UL
+};
+
+static void enable_pcit_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq - SNI_PCIT_INT_START + 24);
+
+	*(volatile u32 *)SNI_PCIT_INT_REG |= mask;
+}
+
+void disable_pcit_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq - SNI_PCIT_INT_START + 24);
+
+	*(volatile u32 *)SNI_PCIT_INT_REG &= ~mask;
+}
+
+void end_pcit_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_pcit_irq(irq);
+}
+
+static struct irq_chip pcit_irq_type = {
+	.typename = "PCIT",
+	.ack = disable_pcit_irq,
+	.mask = disable_pcit_irq,
+	.mask_ack = disable_pcit_irq,
+	.unmask = enable_pcit_irq,
+	.end = end_pcit_irq,
+};
+
+static void pcit_hwint1(void)
+{
+	u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG;
+	int irq;
+
+	clear_c0_status(IE_IRQ1);
+	irq = ffs((pending >> 16) & 0x7f);
+
+	if (likely(irq > 0))
+		do_IRQ (irq + SNI_PCIT_INT_START - 1);
+	set_c0_status (IE_IRQ1);
+}
+
+static void pcit_hwint0(void)
+{
+	u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG;
+	int irq;
+
+	clear_c0_status(IE_IRQ0);
+	irq = ffs((pending >> 16) & 0x7f);
+
+	if (likely(irq > 0))
+		do_IRQ (irq + SNI_PCIT_INT_START - 1);
+	set_c0_status (IE_IRQ0);
+}
+
+static void sni_pcit_hwint(void)
+{
+	u32 pending = (read_c0_cause() & read_c0_status());
+
+	if (pending & C_IRQ1)
+		pcit_hwint1();
+	else if (pending & C_IRQ2)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 4);
+	else if (pending & C_IRQ3)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 5);
+	else if (pending & C_IRQ5)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7);
+}
+
+static void sni_pcit_hwint_cplus(void)
+{
+	u32 pending = (read_c0_cause() & read_c0_status());
+
+	if (pending & C_IRQ0)
+		pcit_hwint0();
+	else if (pending & C_IRQ2)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 4);
+	else if (pending & C_IRQ3)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 5);
+	else if (pending & C_IRQ5)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7);
+}
+
+void __init sni_pcit_irq_init(void)
+{
+	int i;
+
+	mips_cpu_irq_init();
+	for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
+		set_irq_chip(i, &pcit_irq_type);
+	*(volatile u32 *)SNI_PCIT_INT_REG = 0;
+	sni_hwint = sni_pcit_hwint;
+	change_c0_status(ST0_IM, IE_IRQ1);
+	setup_irq (SNI_PCIT_INT_START + 6, &sni_isa_irq);
+}
+
+void __init sni_pcit_cplus_irq_init(void)
+{
+	int i;
+
+	mips_cpu_irq_init();
+	for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
+		set_irq_chip(i, &pcit_irq_type);
+	*(volatile u32 *)SNI_PCIT_INT_REG = 0;
+	sni_hwint = sni_pcit_hwint_cplus;
+	change_c0_status(ST0_IM, IE_IRQ0);
+	setup_irq (SNI_PCIT_INT_START + 6, &sni_isa_irq);
+}
+
+void sni_pcit_init(void)
+{
+	sni_pcit_resource_init();
+	rtc_mips_get_time = mc146818_get_cmos_time;
+	rtc_mips_set_time = mc146818_set_rtc_mmss;
+	board_time_init = sni_cpu_time_init;
+#ifdef CONFIG_PCI
+	register_pci_controller(&sni_pcit_controller);
+#endif
+}
+
+static int __init snirm_pcit_setup_devinit(void)
+{
+	switch (sni_brd_type) {
+	case SNI_BRD_PCI_TOWER:
+	        platform_device_register(&pcit_serial8250_device);
+	        break;
+
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        platform_device_register(&pcit_cplus_serial8250_device);
+	        break;
+	}
+	return 0;
+}
+
+device_initcall(snirm_pcit_setup_devinit);
diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c
index be85bec002e..2eada8aea68 100644
--- a/arch/mips/sni/reset.c
+++ b/arch/mips/sni/reset.c
@@ -13,12 +13,11 @@
  * controller to pulse the reset-line low. We try that for a while,
  * and if it doesn't work, we do some other stupid things.
  */
-static inline void
-kb_wait(void)
+static inline void kb_wait(void)
 {
 	int i;
 
-	for (i=0; i<0x10000; i++)
+	for (i = 0; i < 0x10000; i++)
 		if ((inb_p(0x64) & 0x02) == 0)
 			break;
 }
@@ -32,9 +31,9 @@ void sni_machine_restart(char *command)
 	   We can do that easier ...  */
 	local_irq_disable();
 	for (;;) {
-		for (i=0; i<100; i++) {
+		for (i = 0; i < 100; i++) {
 			kb_wait();
-			for(j = 0; j < 100000 ; j++)
+			for (j = 0; j < 100000 ; j++)
 				/* nothing */;
 			outb_p(0xfe,0x64);	 /* pulse reset low */
 		}
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
new file mode 100644
index 00000000000..517dc698c08
--- /dev/null
+++ b/arch/mips/sni/rm200.c
@@ -0,0 +1,186 @@
+/*
+ * RM200 specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/ds1216.h>
+#include <asm/irq_cpu.h>
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port rm200_data[] = {
+	PORT(0x3f8, 4),
+	PORT(0x2f8, 3),
+	{ },
+};
+
+static struct platform_device rm200_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= rm200_data,
+	},
+};
+
+static struct resource snirm_82596_rm200_rsrc[] = {
+	{
+		.start = 0xb8000000,
+		.end   = 0xb80fffff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 0xbb000000,
+		.end   = 0xbb000004,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 0xbff00000,
+		.end   = 0xbff00020,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 27,
+		.end   = 27,
+		.flags = IORESOURCE_IRQ
+	},
+	{
+		.flags = 0x00
+	}
+};
+
+static struct platform_device snirm_82596_rm200_pdev = {
+	.name           = "snirm_82596",
+	.num_resources  = ARRAY_SIZE(snirm_82596_rm200_rsrc),
+	.resource       = snirm_82596_rm200_rsrc
+};
+
+static struct resource snirm_53c710_rm200_rsrc[] = {
+	{
+		.start = 0xb9000000,
+		.end   = 0xb90fffff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 26,
+		.end   = 26,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device snirm_53c710_rm200_pdev = {
+	.name           = "snirm_53c710",
+	.num_resources  = ARRAY_SIZE(snirm_53c710_rm200_rsrc),
+	.resource       = snirm_53c710_rm200_rsrc
+};
+
+static int __init snirm_setup_devinit(void)
+{
+	if (sni_brd_type == SNI_BRD_RM200) {
+		platform_device_register(&rm200_serial8250_device);
+		platform_device_register(&snirm_82596_rm200_pdev);
+		platform_device_register(&snirm_53c710_rm200_pdev);
+	}
+	return 0;
+}
+
+device_initcall(snirm_setup_devinit);
+
+
+#define SNI_RM200_INT_STAT_REG  0xbc000000
+#define SNI_RM200_INT_ENA_REG   0xbc080000
+
+#define SNI_RM200_INT_START  24
+#define SNI_RM200_INT_END    28
+
+static void enable_rm200_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << (irq - SNI_RM200_INT_START);
+
+	*(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask;
+}
+
+void disable_rm200_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << (irq - SNI_RM200_INT_START);
+
+	*(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask;
+}
+
+void end_rm200_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_rm200_irq(irq);
+}
+
+static struct irq_chip rm200_irq_type = {
+	.typename = "RM200",
+	.ack = disable_rm200_irq,
+	.mask = disable_rm200_irq,
+	.mask_ack = disable_rm200_irq,
+	.unmask = enable_rm200_irq,
+	.end = end_rm200_irq,
+};
+
+static void sni_rm200_hwint(void)
+{
+	u32 pending = read_c0_cause() & read_c0_status();
+	u8 mask;
+	u8 stat;
+	int irq;
+
+	if (pending & C_IRQ5)
+		do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7);
+	else if (pending & C_IRQ0) {
+		clear_c0_status (IE_IRQ0);
+		mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f;
+		stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14;
+		irq = ffs(stat & mask & 0x1f);
+
+		if (likely(irq > 0))
+			do_IRQ (irq + SNI_RM200_INT_START - 1);
+		set_c0_status (IE_IRQ0);
+	}
+}
+
+void __init sni_rm200_irq_init(void)
+{
+	int i;
+
+	* (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f;
+
+	mips_cpu_irq_init();
+	/* Actually we've got more interrupts to handle ...  */
+	for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
+		set_irq_chip(i, &rm200_irq_type);
+	sni_hwint = sni_rm200_hwint;
+	change_c0_status(ST0_IM, IE_IRQ0);
+	setup_irq (SNI_RM200_INT_START + 0, &sni_isa_irq);
+}
+
+void sni_rm200_init(void)
+{
+	set_io_port_base(SNI_PORT_BASE + 0x02000000);
+	ioport_resource.end += 0x02000000;
+	ds1216_base = (volatile unsigned char *) SNI_DS1216_RM200_BASE;
+	rtc_mips_get_time = ds1216_get_cmos_time;
+	board_time_init = sni_cpu_time_init;
+}
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index afeb7f13e5b..68d7cf609b4 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -6,16 +6,10 @@
  * for more details.
  *
  * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
  */
 #include <linux/eisa.h>
-#include <linux/hdreg.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/pm.h>
-#include <linux/pci.h>
 #include <linux/console.h>
 #include <linux/fb.h>
 #include <linux/screen_info.h>
@@ -25,52 +19,16 @@
 #include <asm/sgialib.h>
 #endif
 
-#include <asm/bcache.h>
-#include <asm/bootinfo.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mc146818-time.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/sni.h>
-#include <asm/time.h>
-#include <asm/traps.h>
+
+unsigned int sni_brd_type;
 
 extern void sni_machine_restart(char *command);
 extern void sni_machine_halt(void);
 extern void sni_machine_power_off(void);
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	/* set the clock to 100 Hz */
-	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
-	outb_p(LATCH & 0xff , 0x40);	/* LSB */
-	outb(LATCH >> 8 , 0x40);	/* MSB */
-	setup_irq(0, irq);
-}
-
-/*
- * A bit more gossip about the iron we're running on ...
- */
-static inline void sni_pcimt_detect(void)
-{
-	char boardtype[80];
-	unsigned char csmsr;
-	char *p = boardtype;
-	unsigned int asic;
-
-	csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
-
-	p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
-	if ((csmsr & 0x80) == 0)
-		p += sprintf(p, ", board revision %s",
-		             (csmsr & 0x20) ? "D" : "C");
-	asic = csmsr & 0x80;
-	asic = (csmsr & 0x08) ? asic : !asic;
-	p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
-	printk("%s.\n", boardtype);
-}
-
 static void __init sni_display_setup(void)
 {
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC)
@@ -90,175 +48,11 @@ static void __init sni_display_setup(void)
 #endif
 }
 
-static struct resource sni_io_resource = {
-	.start	= 0x00001000UL,
-	.end	= 0x03bfffffUL,
-	.name	= "PCIMT IO MEM",
-	.flags	= IORESOURCE_IO,
-};
-
-static struct resource pcimt_io_resources[] = {
-	{
-		.start	= 0x00,
-		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x60,
-		.end	= 0x6f,
-		.name	= "keyboard",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x80,
-		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0xc0,
-		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0xcfc,
-		.end	= 0xcff,
-		.name	= "PCI config data",
-		.flags	= IORESOURCE_BUSY
-	}
-};
-
-static struct resource sni_mem_resource = {
-	.start	= 0x10000000UL,
-	.end	= 0xffffffffUL,
-	.name	= "PCIMT PCI MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-/*
- * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
- * for other purposes.  Be paranoid and allocate all of the before the PCI
- * code gets a chance to to map anything else there ...
- *
- * This leaves the following areas available:
- *
- * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
- * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
- * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
- * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
- * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
- */
-static struct resource pcimt_mem_resources[] = {
-	{
-		.start	= 0x100a0000,
-		.end	= 0x100bffff,
-		.name	= "Video RAM area",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x100c0000,
-		.end	= 0x100fffff,
-		.name	= "ISA Reserved",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x14000000,
-		.end	= 0x17bfffff,
-		.name	= "PCI IO",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x17c00000,
-		.end	= 0x17ffffff,
-		.name	= "Cache Replacement Area",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1a000000,
-		.end	= 0x1a000003,
-		.name	= "PCI INT Acknowledge",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fc00000,
-		.end	= 0x1fc7ffff,
-		.name	= "Boot PROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fc80000,
-		.end	= 0x1fcfffff,
-		.name	= "Diag PROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fd00000,
-		.end	= 0x1fdfffff,
-		.name	= "X-Bus",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fe00000,
-		.end	= 0x1fefffff,
-		.name	= "BIOS map",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1ff00000,
-		.end	= 0x1ff7ffff,
-		.name	= "NVRAM / EEPROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fff0000,
-		.end	= 0x1fffefff,
-		.name	= "ASIC PCI",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1ffff000,
-		.end	= 0x1fffffff,
-		.name	= "MP Agent",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x20000000,
-		.end	= 0x9fffffff,
-		.name	= "Main Memory",
-		.flags	= IORESOURCE_BUSY
-	}
-};
-
-static void __init sni_resource_init(void)
-{
-	int i;
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
-		request_resource(&ioport_resource, pcimt_io_resources + i);
-
-	/* request mem space for pcimt-specific devices */
-	for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
-		request_resource(&sni_mem_resource, pcimt_mem_resources + i);
-
-	ioport_resource.end = sni_io_resource.end;
-}
-
-extern struct pci_ops sni_pci_ops;
-
-static struct pci_controller sni_controller = {
-	.pci_ops	= &sni_pci_ops,
-	.mem_resource	= &sni_mem_resource,
-	.mem_offset	= 0x10000000UL,
-	.io_resource	= &sni_io_resource,
-	.io_offset	= 0x00000000UL
-};
-
-static inline void sni_pcimt_time_init(void)
-{
-	rtc_mips_get_time = mc146818_get_cmos_time;
-	rtc_mips_set_time = mc146818_set_rtc_mmss;
-}
 
 void __init plat_mem_setup(void)
 {
-	sni_pcimt_detect();
-	sni_pcimt_sc_init();
-	sni_pcimt_time_init();
-
 	set_io_port_base(SNI_PORT_BASE);
-	ioport_resource.end = sni_io_resource.end;
+//	ioport_resource.end = sni_io_resource.end;
 
 	/*
 	 * Setup (E)ISA I/O memory access stuff
@@ -268,15 +62,33 @@ void __init plat_mem_setup(void)
 	EISA_bus = 1;
 #endif
 
-	sni_resource_init();
+	switch (sni_brd_type) {
+	case SNI_BRD_10:
+	case SNI_BRD_10NEW:
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        sni_a20r_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER:
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        sni_pcit_init();
+		break;
+
+	case SNI_BRD_RM200:
+	        sni_rm200_init();
+	        break;
+
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        sni_pcimt_init();
+	        break;
+	}
 
 	_machine_restart = sni_machine_restart;
 	_machine_halt = sni_machine_halt;
 	pm_power_off = sni_machine_power_off;
 
 	sni_display_setup();
-
-#ifdef CONFIG_PCI
-	register_pci_controller(&sni_controller);
-#endif
 }
diff --git a/arch/mips/sni/sniprom.c b/arch/mips/sni/sniprom.c
index 1213d166f22..6a44bbf0b73 100644
--- a/arch/mips/sni/sniprom.c
+++ b/arch/mips/sni/sniprom.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/string.h>
+#include <linux/console.h>
 
 #include <asm/addrspace.h>
 #include <asm/sni.h>
@@ -31,7 +32,7 @@
 #define PROM_ENTRY(x)		(PROM_VEC + (x))
 
 
-#undef DEBUG
+#define DEBUG
 #ifdef DEBUG
 #define DBG_PRINTF(x...)     prom_printf(x)
 #else
@@ -93,14 +94,14 @@ static void sni_idprom_dump(void)
 {
 	int	i;
 
-	prom_printf("SNI IDProm dump (first 128byte):\n");
-	for(i=0;i<128;i++) {
+	prom_printf("SNI IDProm dump:\n");
+	for (i = 0; i < 256; i++) {
 		if (i%16 == 0)
 			prom_printf("%04x ", i);
 
-		prom_printf("%02x ", *(unsigned char *) (SNI_IDPROM_BASE+i));
+		prom_printf("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i));
 
-		if (i%16 == 15)
+		if (i % 16 == 15)
 			prom_printf("\n");
 	}
 }
@@ -118,7 +119,7 @@ static void sni_mem_init(void )
 	} memconf[8];
 
 	/* MemSIZE from prom in 16MByte chunks */
-	memsize=*((unsigned char *) SNI_IDPROM_MEMSIZE) * 16;
+	memsize = *((unsigned char *) SNI_IDPROM_MEMSIZE) * 16;
 
 	DBG_PRINTF("IDProm memsize: %lu MByte\n", memsize);
 
@@ -126,26 +127,134 @@ static void sni_mem_init(void )
 	__prom_get_memconf(&memconf);
 
 	DBG_PRINTF("prom_get_mem_conf memory configuration:\n");
-	for(i=0;i<8 && memconf[i].size;i++) {
-		prom_printf("Bank%d: %08x @ %08x\n", i,
+	for (i = 0;i < 8 && memconf[i].size; i++) {
+		if (sni_brd_type == SNI_BRD_PCI_TOWER ||
+		    sni_brd_type == SNI_BRD_PCI_TOWER_CPLUS) {
+			if (memconf[i].base >= 0x20000000 &&
+			    memconf[i].base <  0x30000000) {
+				memconf[i].base -= 0x20000000;
+			}
+	}
+		DBG_PRINTF("Bank%d: %08x @ %08x\n", i,
 			memconf[i].size, memconf[i].base);
 		add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM);
 	}
 }
 
+static void __init sni_console_setup(void)
+{
+	char *ctype;
+	char *cdev;
+	char *baud;
+	int port;
+	static char options[8];
+
+	cdev = prom_getenv ("console_dev");
+	if (strncmp (cdev, "tty", 3) == 0) {
+		ctype = prom_getenv ("console");
+		switch (*ctype) {
+		default:
+		case 'l':
+	                port = 0;
+	                baud = prom_getenv("lbaud");
+	                break;
+		case 'r':
+	                port = 1;
+	                baud = prom_getenv("rbaud");
+	                break;
+		}
+		if (baud)
+			strcpy(options, baud);
+		add_preferred_console("ttyS", port, baud ? options : NULL);
+	}
+}
+
 void __init prom_init(void)
 {
 	int argc = fw_arg0;
 	char **argv = (void *)fw_arg1;
-	unsigned int sni_brd_type = *(unsigned char *) SNI_IDPROM_BRDTYPE;
 	int i;
+	int cputype;
 
-	DBG_PRINTF("Found SNI brdtype %02x\n", sni_brd_type);
+	sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE;
+	cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE;
+	switch (sni_brd_type) {
+	case SNI_BRD_TOWER_OASIC:
+	        switch (cputype) {
+		case SNI_CPU_M8030:
+		        systype = "RM400-330";
+		        break;
+		case SNI_CPU_M8031:
+		        systype = "RM400-430";
+		        break;
+		case SNI_CPU_M8037:
+		        systype = "RM400-530";
+		        break;
+		case SNI_CPU_M8034:
+		        systype = "RM400-730";
+		        break;
+		default:
+			systype = "RM400-xxx";
+			break;
+		}
+	        break;
+	case SNI_BRD_MINITOWER:
+	        switch (cputype) {
+		case SNI_CPU_M8021:
+		case SNI_CPU_M8043:
+		        systype = "RM400-120";
+		        break;
+		case SNI_CPU_M8040:
+		        systype = "RM400-220";
+		        break;
+		case SNI_CPU_M8053:
+		        systype = "RM400-225";
+		        break;
+		case SNI_CPU_M8050:
+		        systype = "RM400-420";
+		        break;
+		default:
+			systype = "RM400-xxx";
+			break;
+		}
+	        break;
+	case SNI_BRD_PCI_TOWER:
+	        systype = "RM400-Cxx";
+	        break;
+	case SNI_BRD_RM200:
+	        systype = "RM200-xxx";
+	        break;
+	case SNI_BRD_PCI_MTOWER:
+	        systype = "RM300-Cxx";
+	        break;
+	case SNI_BRD_PCI_DESKTOP:
+	        switch (read_c0_prid() & 0xff00) {
+		case PRID_IMP_R4600:
+		case PRID_IMP_R4700:
+		        systype = "RM200-C20";
+		        break;
+		case PRID_IMP_R5000:
+		        systype = "RM200-C40";
+		        break;
+		default:
+		        systype = "RM200-Cxx";
+		        break;
+		}
+	        break;
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        systype = "RM400-Exx";
+	        break;
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        systype = "RM300-Exx";
+	        break;
+	}
+	DBG_PRINTF("Found SNI brdtype %02x name %s\n", sni_brd_type,systype);
 
 #ifdef DEBUG
 	sni_idprom_dump();
 #endif
 	sni_mem_init();
+	sni_console_setup();
 
 	/* copy prom cmdline parameters to kernel cmdline */
 	for (i = 1; i < argc; i++) {
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
new file mode 100644
index 00000000000..20028fc7757
--- /dev/null
+++ b/arch/mips/sni/time.c
@@ -0,0 +1,148 @@
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+
+#define SNI_CLOCK_TICK_RATE     3686400
+#define SNI_COUNTER2_DIV        64
+#define SNI_COUNTER0_DIV        ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
+
+static void sni_a20r_timer_ack(void)
+{
+        *(volatile u8 *)A20R_PT_TIM0_ACK = 0x0; wmb();
+}
+
+/*
+ * a20r platform uses 2 counters to divide the input frequency.
+ * Counter 2 output is connected to Counter 0 & 1 input.
+ */
+static void __init sni_a20r_timer_setup(struct irqaction *irq)
+{
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; wmb();
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE +  0) = (SNI_COUNTER0_DIV) & 0xff; wmb();
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE +  0) = (SNI_COUNTER0_DIV >> 8) & 0xff; wmb();
+
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; wmb();
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE +  8) = (SNI_COUNTER2_DIV) & 0xff; wmb();
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE +  8) = (SNI_COUNTER2_DIV >> 8) & 0xff; wmb();
+
+        setup_irq(SNI_A20R_IRQ_TIMER, irq);
+        mips_timer_ack = sni_a20r_timer_ack;
+}
+
+#define SNI_8254_TICK_RATE        1193182UL
+
+#define SNI_8254_TCSAMP_COUNTER   ((SNI_8254_TICK_RATE / HZ) + 255)
+
+static __init unsigned long dosample(void)
+{
+	u32 ct0, ct1;
+	volatile u8 msb, lsb;
+
+	/* Start the counter. */
+	outb_p (0x34, 0x43);
+	outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40);
+	outb (SNI_8254_TCSAMP_COUNTER >> 8, 0x40);
+
+	/* Get initial counter invariant */
+	ct0 = read_c0_count();
+
+	/* Latch and spin until top byte of counter0 is zero */
+	do {
+		outb (0x00, 0x43);
+		lsb = inb (0x40);
+		msb = inb (0x40);
+		ct1 = read_c0_count();
+	} while (msb);
+
+	/* Stop the counter. */
+	outb (0x38, 0x43);
+	/*
+	 * Return the difference, this is how far the r4k counter increments
+	 * for every 1/HZ seconds. We round off the nearest 1 MHz of master
+	 * clock (= 1000000 / HZ / 2).
+	 */
+	/*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
+	return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
+}
+
+/*
+ * Here we need to calibrate the cycle counter to at least be close.
+ */
+__init void sni_cpu_time_init(void)
+{
+	unsigned long r4k_ticks[3];
+	unsigned long r4k_tick;
+
+	/*
+	 * Figure out the r4k offset, the algorithm is very simple and works in
+	 * _all_ cases as long as the 8254 counter register itself works ok (as
+	 * an interrupt driving timer it does not because of bug, this is why
+	 * we are using the onchip r4k counter/compare register to serve this
+	 * purpose, but for r4k_offset calculation it will work ok for us).
+	 * There are other very complicated ways of performing this calculation
+	 * but this one works just fine so I am not going to futz around. ;-)
+	 */
+	printk(KERN_INFO "Calibrating system timer... ");
+	dosample();	/* Prime cache. */
+	dosample();	/* Prime cache. */
+	/* Zero is NOT an option. */
+	do {
+		r4k_ticks[0] = dosample();
+	} while (!r4k_ticks[0]);
+	do {
+		r4k_ticks[1] = dosample();
+	} while (!r4k_ticks[1]);
+
+	if (r4k_ticks[0] != r4k_ticks[1]) {
+		printk("warning: timer counts differ, retrying... ");
+		r4k_ticks[2] = dosample();
+		if (r4k_ticks[2] == r4k_ticks[0]
+		    || r4k_ticks[2] == r4k_ticks[1])
+			r4k_tick = r4k_ticks[2];
+		else {
+			printk("disagreement, using average... ");
+			r4k_tick = (r4k_ticks[0] + r4k_ticks[1]
+				   + r4k_ticks[2]) / 3;
+		}
+	} else
+		r4k_tick = r4k_ticks[0];
+
+	printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
+		(int) (r4k_tick / (500000 / HZ)),
+		(int) (r4k_tick % (500000 / HZ)));
+
+	mips_hpt_frequency = r4k_tick * HZ;
+}
+
+/*
+ * R4k counter based timer interrupt. Works on RM200-225 and possibly
+ * others but not on RM400
+ */
+static void __init sni_cpu_timer_setup(struct irqaction *irq)
+{
+        setup_irq(SNI_MIPS_IRQ_CPU_TIMER, irq);
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+	switch (sni_brd_type) {
+	case SNI_BRD_10:
+	case SNI_BRD_10NEW:
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        sni_a20r_timer_setup (irq);
+	        break;
+
+	case SNI_BRD_PCI_TOWER:
+	case SNI_BRD_RM200:
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        sni_cpu_timer_setup (irq);
+	        break;
+	}
+}