Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

5 files changed, 218 insertions, 19 deletions

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index d4de8a4814b..8796e12c56f 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -164,6 +164,19 @@ config IA64_PAGE_SIZE_64KB
 
 endchoice
 
+choice
+	prompt "Page Table Levels"
+	default PGTABLE_3
+
+config PGTABLE_3
+	bool "3 Levels"
+
+config PGTABLE_4
+	depends on !IA64_PAGE_SIZE_64KB
+	bool "4 Levels"
+
+endchoice
+
 source kernel/Kconfig.hz
 
 config IA64_BRL_EMU
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 08112ab3846..87cfd31a4a3 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -80,6 +80,8 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_PGTABLE_3 is not set
+CONFIG_PGTABLE_4=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 6e3f147e03e..275a26c6e5a 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -82,6 +82,8 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index c13ca0d49c4..e06f21f60dc 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -114,7 +114,7 @@ ENTRY(vhpt_miss)
 	shl r21=r16,3				// shift bit 60 into sign bit
 	shr.u r17=r16,61			// get the region number into r17
 	;;
-	shr r22=r21,3
+	shr.u r22=r21,3
 #ifdef CONFIG_HUGETLB_PAGE
 	extr.u r26=r25,2,6
 	;;
@@ -140,20 +140,34 @@ ENTRY(vhpt_miss)
 (p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=PTA + IFA(33,42)*8
 (p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
 	cmp.eq p7,p6=0,r21			// unused address bits all zeroes?
-	shr.u r18=r22,PMD_SHIFT			// shift L2 index into position
+#ifdef CONFIG_PGTABLE_4
+	shr.u r28=r22,PUD_SHIFT			// shift L2 index into position
+#else
+	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+#endif
 	;;
 	ld8 r17=[r17]				// fetch the L1 entry (may be 0)
 	;;
 (p7)	cmp.eq p6,p7=r17,r0			// was L1 entry NULL?
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+#ifdef CONFIG_PGTABLE_4
+	dep r28=r28,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+	;;
+	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+(p7)	ld8 r29=[r28]				// fetch the L2 entry (may be 0)
 	;;
-(p7)	ld8 r20=[r17]				// fetch the L2 entry (may be 0)
-	shr.u r19=r22,PAGE_SHIFT		// shift L3 index into position
+(p7)	cmp.eq.or.andcm p6,p7=r29,r0		// was L2 entry NULL?
+	dep r17=r18,r29,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+#else
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+#endif
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r20,r0		// was L2 entry NULL?
-	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+(p7)	ld8 r20=[r17]				// fetch the L3 entry (may be 0)
+	shr.u r19=r22,PAGE_SHIFT		// shift L4 index into position
 	;;
-(p7)	ld8 r18=[r21]				// read the L3 PTE
+(p7)	cmp.eq.or.andcm p6,p7=r20,r0		// was L3 entry NULL?
+	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// compute address of L4 page table entry
+	;;
+(p7)	ld8 r18=[r21]				// read the L4 PTE
 	mov r19=cr.isr				// cr.isr bit 0 tells us if this is an insn miss
 	;;
 (p7)	tbit.z p6,p7=r18,_PAGE_P_BIT		// page present bit cleared?
@@ -192,14 +206,21 @@ ENTRY(vhpt_miss)
 	 * between reading the pagetable and the "itc".  If so, flush the entry we
 	 * inserted and retry.
 	 */
-	ld8 r25=[r21]				// read L3 PTE again
-	ld8 r26=[r17]				// read L2 entry again
+	ld8 r25=[r21]				// read L4 entry again
+	ld8 r26=[r17]				// read L3 PTE again
+#ifdef CONFIG_PGTABLE_4
+	ld8 r18=[r28]				// read L2 entry again
+#endif
+	cmp.ne p6,p7=r0,r0
 	;;
-	cmp.ne p6,p7=r26,r20			// did L2 entry change
+	cmp.ne.or.andcm p6,p7=r26,r20		// did L3 entry change
+#ifdef CONFIG_PGTABLE_4
+	cmp.ne.or.andcm p6,p7=r29,r18		// did L4 PTE change
+#endif
 	mov r27=PAGE_SHIFT<<2
 	;;
 (p6)	ptc.l r22,r27				// purge PTE page translation
-(p7)	cmp.ne.or.andcm p6,p7=r25,r18		// did L3 PTE change
+(p7)	cmp.ne.or.andcm p6,p7=r25,r18		// did L4 PTE change
 	;;
 (p6)	ptc.l r16,r27				// purge translation
 #endif
@@ -432,18 +453,30 @@ ENTRY(nested_dtlb_miss)
 (p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=PTA + IFA(33,42)*8
 (p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
 	cmp.eq p7,p6=0,r21			// unused address bits all zeroes?
-	shr.u r18=r22,PMD_SHIFT			// shift L2 index into position
+#ifdef CONFIG_PGTABLE_4
+	shr.u r18=r22,PUD_SHIFT			// shift L2 index into position
+#else
+	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+#endif
 	;;
 	ld8 r17=[r17]				// fetch the L1 entry (may be 0)
 	;;
 (p7)	cmp.eq p6,p7=r17,r0			// was L1 entry NULL?
 	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
 	;;
+#ifdef CONFIG_PGTABLE_4
 (p7)	ld8 r17=[r17]				// fetch the L2 entry (may be 0)
-	shr.u r19=r22,PAGE_SHIFT		// shift L3 index into position
+	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
 	;;
 (p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was L2 entry NULL?
-	dep r17=r19,r17,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+	;;
+#endif
+(p7)	ld8 r17=[r17]				// fetch the L3 entry (may be 0)
+	shr.u r19=r22,PAGE_SHIFT		// shift L4 index into position
+	;;
+(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was L3 entry NULL?
+	dep r17=r19,r17,3,(PAGE_SHIFT-3)	// compute address of L4 page table entry
 (p6)	br.cond.spnt page_fault
 	mov b0=r30
 	br.sptk.many b0				// return to continuation point
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 0fb579ef18c..e510dce9971 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -30,6 +30,7 @@
 #include <linux/root_dev.h>
 #include <linux/nodemask.h>
 #include <linux/pm.h>
+#include <linux/efi.h>
 
 #include <asm/io.h>
 #include <asm/sal.h>
@@ -242,6 +243,135 @@ static void __init sn_check_for_wars(void)
 	}
 }
 
+/*
+ * Scan the EFI PCDP table (if it exists) for an acceptable VGA console
+ * output device.  If one exists, pick it and set sn_legacy_{io,mem} to
+ * reflect the bus offsets needed to address it.
+ *
+ * Since pcdp support in SN is not supported in the 2.4 kernel (or at least
+ * the one lbs is based on) just declare the needed structs here.
+ *
+ * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ *
+ * Returns 0 if no acceptable vga is found, !0 otherwise.
+ *
+ * Note:  This stuff is duped here because Altix requires the PCDP to
+ * locate a usable VGA device due to lack of proper ACPI support.  Structures
+ * could be used from drivers/firmware/pcdp.h, but it was decided that moving
+ * this file to a more public location just for Altix use was undesireable.
+ */
+
+struct hcdp_uart_desc {
+	u8	pad[45];
+};
+
+struct pcdp {
+	u8	signature[4];	/* should be 'HCDP' */
+	u32	length;
+	u8	rev;		/* should be >=3 for pcdp, <3 for hcdp */
+	u8	sum;
+	u8	oem_id[6];
+	u64	oem_tableid;
+	u32	oem_rev;
+	u32	creator_id;
+	u32	creator_rev;
+	u32	num_type0;
+	struct hcdp_uart_desc uart[0];	/* num_type0 of these */
+	/* pcdp descriptors follow */
+}  __attribute__((packed));
+
+struct pcdp_device_desc {
+	u8	type;
+	u8	primary;
+	u16	length;
+	u16	index;
+	/* interconnect specific structure follows */
+	/* device specific structure follows that */
+}  __attribute__((packed));
+
+struct pcdp_interface_pci {
+	u8	type;		/* 1 == pci */
+	u8	reserved;
+	u16	length;
+	u8	segment;
+	u8	bus;
+	u8 	dev;
+	u8	fun;
+	u16	devid;
+	u16	vendid;
+	u32	acpi_interrupt;
+	u64	mmio_tra;
+	u64	ioport_tra;
+	u8	flags;
+	u8	translation;
+}  __attribute__((packed));
+
+struct pcdp_vga_device {
+	u8	num_eas_desc;
+	/* ACPI Extended Address Space Desc follows */
+}  __attribute__((packed));
+
+/* from pcdp_device_desc.primary */
+#define PCDP_PRIMARY_CONSOLE	0x01
+
+/* from pcdp_device_desc.type */
+#define PCDP_CONSOLE_INOUT	0x0
+#define PCDP_CONSOLE_DEBUG	0x1
+#define PCDP_CONSOLE_OUT	0x2
+#define PCDP_CONSOLE_IN		0x3
+#define PCDP_CONSOLE_TYPE_VGA	0x8
+
+#define PCDP_CONSOLE_VGA	(PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT)
+
+/* from pcdp_interface_pci.type */
+#define PCDP_IF_PCI		1
+
+/* from pcdp_interface_pci.translation */
+#define PCDP_PCI_TRANS_IOPORT	0x02
+#define PCDP_PCI_TRANS_MMIO	0x01
+
+static void
+sn_scan_pcdp(void)
+{
+	u8 *bp;
+	struct pcdp *pcdp;
+	struct pcdp_device_desc device;
+	struct pcdp_interface_pci if_pci;
+	extern struct efi efi;
+
+	pcdp = efi.hcdp;
+	if (! pcdp)
+		return;		/* no hcdp/pcdp table */
+
+	if (pcdp->rev < 3)
+		return;		/* only support PCDP (rev >= 3) */
+
+	for (bp = (u8 *)&pcdp->uart[pcdp->num_type0];
+	     bp < (u8 *)pcdp + pcdp->length;
+	     bp += device.length) {
+		memcpy(&device, bp, sizeof(device));
+		if (! (device.primary & PCDP_PRIMARY_CONSOLE))
+			continue;	/* not primary console */
+
+		if (device.type != PCDP_CONSOLE_VGA)
+			continue;	/* not VGA descriptor */
+
+		memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci));
+		if (if_pci.type != PCDP_IF_PCI)
+			continue;	/* not PCI interconnect */
+
+		if (if_pci.translation & PCDP_PCI_TRANS_IOPORT)
+			vga_console_iobase =
+				if_pci.ioport_tra | __IA64_UNCACHED_OFFSET;
+
+		if (if_pci.translation & PCDP_PCI_TRANS_MMIO)
+			vga_console_membase =
+				if_pci.mmio_tra | __IA64_UNCACHED_OFFSET;
+
+		break; /* once we find the primary, we're done */
+	}
+}
+
 /**
  * sn_setup - SN platform setup routine
  * @cmdline_p: kernel command line
@@ -263,16 +393,35 @@ void __init sn_setup(char **cmdline_p)
 
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	/*
-	 * If there was a primary vga adapter identified through the
-	 * EFI PCDP table, make it the preferred console.  Otherwise
-	 * zero out conswitchp.
+	 * Handle SN vga console.
+	 *
+	 * SN systems do not have enough ACPI table information
+	 * being passed from prom to identify VGA adapters and the legacy
+	 * addresses to access them.  Until that is done, SN systems rely
+	 * on the PCDP table to identify the primary VGA console if one
+	 * exists.
+	 *
+	 * However, kernel PCDP support is optional, and even if it is built
+	 * into the kernel, it will not be used if the boot cmdline contains
+	 * console= directives.
+	 *
+	 * So, to work around this mess, we duplicate some of the PCDP code
+	 * here so that the primary VGA console (as defined by PCDP) will
+	 * work on SN systems even if a different console (e.g. serial) is
+	 * selected on the boot line (or CONFIG_EFI_PCDP is off).
 	 */
 
+	if (! vga_console_membase)
+		sn_scan_pcdp();
+
 	if (vga_console_membase) {
 		/* usable vga ... make tty0 the preferred default console */
-		add_preferred_console("tty", 0, NULL);
+		if (!strstr(*cmdline_p, "console="))
+			add_preferred_console("tty", 0, NULL);
 	} else {
 		printk(KERN_DEBUG "SGI: Disabling VGA console\n");
+		if (!strstr(*cmdline_p, "console="))
+			add_preferred_console("ttySG", 0, NULL);
 #ifdef CONFIG_DUMMY_CONSOLE
 		conswitchp = &dummy_con;
 #else